Related
Hi Guys, i have 1 little problem.
im on the last Android N Preview 5 and i wannt to root it.
i have downloaded SuperSU 2.76 and TWRP 3.0.2.0
I rebooted to bootloader flashed thw twrp via Terminal, now i wanna boot into recovery because of the SuperSU zip, but i am stucking on TWRP Logo.
Phone is working normal, but i cant enter into recovery, anyone else has the same problem?
Thanks and best Regards,
Taker
You have to flash another version of TWRP... But, dude, i'm on the exact same case, same preview, and i can't get it to work. TWRP doesn't seem to work :/ I always got the god damn "no command" even if i follow some of the tutorials here...
EDIT : Try flashing the 3.0.0 or 3.0.1, and when all will be working (if you achieve, tell me how xD) update it.
EDIT 2 : I may find something, i'll let you know !
TWRP doesnt work with the developer previews without modifying the boot image.
If you want to root, you can use CF-Auto root.
You will still have the stock recovery.
Taker18 said:
Hi Guys, i have 1 little problem.
im on the last Android N Preview 5 and i wannt to root it.
i have downloaded SuperSU 2.76 and TWRP 3.0.2.0
I rebooted to bootloader flashed thw twrp via Terminal, now i wanna boot into recovery because of the SuperSU zip, but i am stucking on TWRP Logo.
Phone is working normal, but i cant enter into recovery, anyone else has the same problem?
Thanks and best Regards,
Taker
Click to expand...
Click to collapse
This is a known issue, Search the forum for the resolution. Basically TWRP won't work on the Android N on Encrypted device.
The solution is pretty simple. You need to decrypt your device's storage. TWRP currently doesn't work with encrypted N preview.
This could be easily done by flashing the modified boot image, that will disable forced-encryption. After that, you will need to format the current userdata partition to decrypt the storage.
Code:
fastboot format userdata
fastboot format cache
Once that is done, you can flash TWRP and then use SuperSU to root.
Another way to direct root is by using Cf-Auto-Root. But I am not sure about that specifically. While some users have succeeded, there are a few who have failed to root using Cf-Auto-Root.
Just use CF-Auto Root, it will do all the things.
Make sure you have unlocked your Bootloader and downloaded the good version of CF for your device.
Reboot your phone in bootloader mode, plug it to a computer, and just open the .bat (if you're on windows, or the equivalent for Mac / Linux). It will install SuperSU. When it's done, don't forget to download the TWRP Manager on the Playstore, and you'll have a working Recovery ! I did that, i know have a rooted nexus 6P on Android N preview 5
Also, lot's of Root's only apps will not work properly, because lots of changes took place on Android N. So make sure you follow some guide out there (exemple : Ex Kernel don't work if you don't tweak some things, same with Ad Away, so make sure you're googling)
I followed the premise of this thread here so all credits go to the OP http://forum.xda-developers.com/showthread.php?t=3410906 I flashed the latest Marshmallow vendor.img via fastboot, then flashed TWRP via fastboot. Booted into recovery from the bootloader then side loaded supersu using adb side load in TWRP. After that I rebooted to bootloader from TWRP and fastboot flashed the DP5 vendor.img and recovery.img. All is working well.
So.... Pokemon Go has a lot to answer for......
I have run into a really strange problem when trying to install an OTA on my *unrooted* Oneplus 2. I have been trying to fix this for days but I have completely run out of ideas.
I originally had a working stock Oxygen 3 (Marshmallow) rom with TWRP recovery on my device (not sure of the version). The device was rooted and apart from not being able to install OTAs, I was fairly happy with the setup. Then along came the Pokemon GO update that banned rooted devices. Ok, "big deal" I thought. I was quite content playing Ingress instead (a far better game by the way that doesn't rely on a "pay to win" structure). I really wasn't too worried but then I found out about "systemless root" and "Magisk". I thought that if I installed this correctly I could still play a bit of Pokemon GO when I wanted to and could toggle a root button in Magisk Manager to install OTAs when they became available.
This is where the problems started.
I followed a guide on how to unroot and install Magisk and "Phh's Superuser". The problem was that the Phh Superuser was being denied permissions for Magisk Manager, there were no pop up notifications prompting me to give it access, just toast notifications. I couldn't for the life of me figure out how to give it permission so the "enable root" slider button kept sliding back, not allowing root. This is when I used SuperSU ver 2.76 (Magisk version) and it seemed to work fine. I now had a stock Marshmallow rom with TWRP and Magisk Manager all working exactly how they should be. I could toggle root and play Pokemon GO, then return to a rooted state when I needed to.
"Awesome, mission accomplished." I thought. Now I just need to toggle root off, download the latest OTA and install it through Flashfire.
First I made a complete nandroid backup (as I've done with other devices many times before) through TWRP. I even copied the backup folder to my PC in case something went wrong.
Well, this is when the nightmare started.
The first mistake I made was to use Flashfire when it clearly stated that Oneplus devices were currently untested. Not sure if it was a big issue or not, but it was a mistake none the less. The second mistake I made was to not stop the stock recovery being replaced when prompted before the reboot. I assumed (and it even states in the app) that the custom recovery should be reverted back to the stock recovery when attempting to apply OTA updates.
So I went ahead and rebooted, waiting for the OTA to install. I'm fairly sure from memory that it went into the stock recovery, flashed the OTA and restarted.
This is when the phone soft bricked.
"Oh well, that is why I made the backup." I thought.
I reflashed TWRP in fastboot mode and attempted to restore my backup. No dice, the phone was still soft bricked.
(And by "soft bricked" and "boot looping" I mean the Oneplus logo was in the middle of the screen, "Powered by Android" was at the bottom and the two blue LEDs for the buttons either side of the fingerprint scanner/home button remained on. This for me was the tell tale sign of the soft brick because these two light go off after a few seconds after rebooting usually.
So from here I have tried EVERYTHING. All I really want now is a working stock (rooted) Marshmallow rom with TWRP. I have downloaded many different full rom zips and attempted to flash them through TWRP with no success, I have returned to stock recovery and tried flashing signed roms with no success, I've even tried flashing the official CM13 rom for Oneplus 2 (with the correct GAPPs and kernel) through TWRP with no luck.
But here is where it gets interesting......
There are a few things that are really weird...
1. I have always been able to get into Fastboot mode and ADB and Fastboot commands "work".
* Operations succeed but don't stick (for example trying to flash TWRP versions 3.0.2-1 and 3.0.2-2 through Fastboot mode result in no recovery being there at all.
2. I can flash TWRP recovery though Fastboot mode but ONLY VERSIONS 3.0.2-0 and lower. I can also successfully flash the stock recovery.
3. I can flash OxygenOS 2.2.1 but NOT ANY VERSION RELEASED AFTER THAT. Doing so results in the soft brick "bootloop" I mentioned earlier.
4. Attempting to flash the official CM13 rom for Oneplus 2 doesn't work either. Originally I got the error 7 message, but after editing "Updater-script" in the rom and re-zipping, the process seemed to work fine in TWRP but the reboot gave me... you guessed it... a softbrick.
I have flashed custom roms on a few different devices before so I'm not a COMPLETE newbie when it comes to this stuff, but I am by no means a developer or even anything close to one. I have bricked this phone in the past (long story, involved getting it without an invite and it being shipped to me with spyware on it) but I used a guide very similar to this and it worked a treat.
www(dot)androidbrick(dot)com/unbrick-oneplus-one-two-3-qualcomm-hs-usb-qdloader-9008
So, thinking that this process would format all partitions and start me from scatch I tried it. It worked fine but I was still unable to upgrade from Oxygen OS 2.2.1 or install TWRP versions 3.0.2-1 or 3.0.2-2.
I have tried all sorts of things. I have wiped, flashed and wiped again. Factory resets, dirty flashes, clean flashes.... everything. All sorts of different sources for the TWRP images and Oxygen roms... nothing seems to work.
It's just so weird considering it's not a hard brick... just a soft brick.
So I really need my phone so I am sitting on this current build because it is the only one that works.
Here are some details of the current build I am using. (using CPU-Z app)
Model: Oneplus 2 (ONE A2001)
Android version: 5.1.1
Oxygen OS version: 2.2.1
Bootloader: Unknown
Build ID: ONE A2001_14_160226
Java VM: ART 2.1.0
OpenGL ES: 3.1
Kernel Architecture: aarch64
Kernel version: 3.10.49-perf+ (56)
Root access: Yes
Super user app: SuperSU Free v2.46 (Chainfire)
OEM unlocking: Enabled
USB debugging: Enabled
And these are some of the ZIPs and IMGs that refuse to be flashed to my device.
TWRP-3.0.2-1-oneplus2
TWRP-3.0.2-2-oneplus2
Grarak's TWRP recovery IMG for Oneplus2 (modified to install CM13) according to this guide:
missingtricks(dot)net/oneplus-2-official-cyanogenmod-13
cm-13.0-20160924-NIGHTLY-oneplus2
OnePlus2Oxygen_14_OTA_019_all_1606041303_bd42fc5cc5cc4ab2
And also my TWRP backup named 2016-09-16--09-44-09
I am really at a loss as to what to do next. ANY help ANYONE could give me would be greatly appreciated. I have been all over the net looking for ways around this bt have had no luck.
As I've said, I'm not a huge tech head, but I'm not a newbie either. The only thing I can think of is that somehow one of the partitions (maybe boot? ) may have been corrupted somehow when messing around with systemless root. But I don't know how considering it's "systemless". If anyone knows how to check for corrupted partitions on the Oneplus 2 please let me know and I'll try it. Maybe formatting these partitions might help (????), but I don't want to permanently brick my phone.
But I don't know how I've got this particular build working if one of the partitions has been corrupted. And the corrupted partition thing is just a guess.....
Please, anyone, someone point me in the right direction. Again, any and all feddback is welcomed and would be very much appreciated.
This is all Pikachu's fault.
Kamakiriash said:
A very long post...
Click to expand...
Click to collapse
The normal way too update from OOS 2 to OOS 3 is:
Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
Reboot recovery via TWRP so that you now have a recovery that's compatible with the new bootloader
Wipe data, cache & dalvik-cache (but not internal storage)
Flash the OOS 3 signed flashable zip again to update the system
Flash one of the modified SuperSU zips if you want root
Reboot system
All the files you need are in post #1 of this thread.
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Kamakiriash said:
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Click to expand...
Click to collapse
Glad you're sorted.
Not sure about Magisk as I've never used it.
CM13 is OK but whether it's worth you moving to it is your choice. Personally, I prefer TipsyOS!
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Click to expand...
Click to collapse
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
Click to expand...
Click to collapse
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Aood said:
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Click to expand...
Click to collapse
I don't have a OP2 anymore but that post was seven months ago and the instructions worked for numerous users.
Don't enable zip signature verification in TWRP - it's unnecessary.
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
thanx for replay Spannaa,
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
Click to expand...
Click to collapse
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Aood said:
thanx for replay Spannaa,
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Click to expand...
Click to collapse
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Click to expand...
Click to collapse
Yes, rebooting recovery "directly from TWRP"
and bootloader loader is unlocked,..
anyway it's not important to fix the phone, it's almost one year since last time I use it, yesterday I saw it in the drawer and try to figure out the issue..,
Don´t know if anybody had this kind of Problem before. Couldnt find anything.
Was on Stock V image with cutom kernel flashed via fastboot and SU flashed via fastboo boot to root.
Problem:
bootet TWRP via fastboot with newest drivers. Flashed RC via booted TWRP.
Wanted to reboot system, but was stuck in a TWRP bootloop. No chance to boot into bootloader also. Even tried changing slots in twrp but still only bootloop to twrp.
Than I thought about sideload because that's what I did with latest ota image from Google.
Here is what I did:
sideloaded the ota.zip via TWRP from PC "adb sideload ota_file.zip" ota_file should be the name of your ota file
It gave me an error, but after rebooting system all fine again. Back to stock V and bootloader is there again.
Easier thing to do is flash boot.img from the factory image to boot_a and boot_b if you are having issues.
This problem occurs when you flash TWRP if you have root installed. To avoid, remove root before installing TWRP.
Oh, I should mention to get into bootloader from TWRP, simply use the adb command "adb reboot bootloader". Should work, worked for me.
I just have avoided flashing TWRP altogether. I rarely need to flash anything, so it can wait until I am at work or home to use a PC to BOOT TWRP each time I need it, instead of flashing it.
Nitemare3219 said:
I just have avoided flashing TWRP altogether. I rarely need to flash anything, so it can wait until I am at work or home to use a PC to BOOT TWRP each time I need it, instead of flashing it.
Click to expand...
Click to collapse
Until it gets a little more stable on the Pixel, this is probably a good idea.
Good idea. But I M sometimes flashing when I am at or on the way to work.
Flash junkie needs his daily dosis
mikaole said:
Don´t know if anybody had this kind of Problem before. Couldnt find anything.
Was on Stock V image with cutom kernel flashed via fastboot and SU flashed via fastboo boot to root.
Problem:
bootet TWRP via fastboot with newest drivers. Flashed RC via booted TWRP.
Wanted to reboot system, but was stuck in a TWRP bootloop. No chance to boot into bootloader also. Even tried changing slots in twrp but still only bootloop to twrp.
Than I thought about sideload because that's what I did with latest ota image from Google.
Here is what I did:
sideloaded the ota.zip via TWRP from PC "adb sideload ota_file.zip" ota_file should be the name of your ota file
It gave me an error, but after rebooting system all fine again. Back to stock V and bootloader is there again.
Click to expand...
Click to collapse
I know its already solved, but here is what helps (for future):
Just flash SuperSU (latest Version)
Done. This will patch the boot.img so your phone boots in the OS again.
Shadow of Destiny said:
I know its already solved, but here is what helps (for future):
Just flash SuperSU (latest Version)
Done. This will patch the boot.img so your phone boots in the OS again.
Click to expand...
Click to collapse
I have this issue and flashing supersu didn't fix my problem. Will go to factory image flashing.
Shadow of Destiny said:
I know its already solved, but here is what helps (for future):
Just flash SuperSU (latest Version)
Done. This will patch the boot.img so your phone boots in the OS again.
Click to expand...
Click to collapse
Thanks! This worked for me.
EDIT: Never mind, I missed the comment guiding ppl to flash SuperSU. I suppose that when this thread was posted, that SuperSU was still being used instead of Magisk, so solution is essentially the same thing I'm recommending.
I think this thread is missing the much easier solution here:
I just ran into this issue with my Pixel 2 XL when I tried to update my TWRP version from 3.2.1-2 to 3.2.3-0. Here's how it went:
1. Downloaded the TWRP zip, md5 and so on from the official TWRP website for the Pixel 2 XL
2. Booted to TWRP and installed / flashed the zip of TWRP 3.2.3-0
3. Wiped dalvik and then chose Reboot to System from TWRP -- the phone booted right back into TWRP
4. Tried again to reboot the same way. Same result.
5. Installed / Flashed the 3.2.1-2 TWRP zip which was still on my phone, in order to revert to the previous version, and then Rebooted to System -- same result
6. Flashed 3.2.3-0 zip again, then flashed the Flash Kernel that I've been using, and then Flashed the Magisk v16.0 zip that I used to root, then chose Reboot to System -- AND IT WORKED; the phone booted normally and now I'm updated to the latest TWRP successfully.
tl;dr - The solution is to flash Magisk again after updating TWRP. Pretty sure this goes for kernel updates too.
cognitivedissonance said:
EDIT: Never mind, I missed the comment guiding ppl to flash SuperSU. I suppose that when this thread was posted, that SuperSU was still being used instead of Magisk, so solution is essentially the same thing I'm recommending.
I think this thread is missing the much easier solution here:
I just ran into this issue with my Pixel 2 XL when I tried to update my TWRP version from 3.2.1-2 to 3.2.3-0. Here's how it went:
1. Downloaded the TWRP zip, md5 and so on from the official TWRP website for the Pixel 2 XL
2. Booted to TWRP and installed / flashed the zip of TWRP 3.2.3-0
3. Wiped dalvik and then chose Reboot to System from TWRP -- the phone booted right back into TWRP
4. Tried again to reboot the same way. Same result.
5. Installed / Flashed the 3.2.1-2 TWRP zip which was still on my phone, in order to revert to the previous version, and then Rebooted to System -- same result
6. Flashed 3.2.3-0 zip again, then flashed the Flash Kernel that I've been using, and then Flashed the Magisk v16.0 zip that I used to root, then chose Reboot to System -- AND IT WORKED; the phone booted normally and now I'm updated to the latest TWRP successfully.
tl;dr - The solution is to flash Magisk again after updating TWRP. Pretty sure this goes for kernel updates too.
Click to expand...
Click to collapse
This is a Pixel XL forum.
Homeboy76 said:
This is a Pixel XL forum.
Click to expand...
Click to collapse
Aren't the two systems (Pixel OG and Pixel 2) extremely similar? If they're not, then my advice should be ignored for anyone using the Pixel OG.
Hello,
I have a big problem. I don't know what to do.
I wanted to make a clean install of OxygenOS 4.5.8 and so i downloaded it, did it on SD card together with Magisk and no_verity_op5.zip (because i read that this decrypt the data).
So i cleand data and installed no_verity_op5.zip via TWRP, but when i wanted to reboot it takes way to long (i waited 30minutes but it stays on boot circle)
After that i booted into TWRP and decided to made a factory reset and to install OxygonOS 4.5.8 in a clean version. But it was not possible anymore!
When i want to install the .zip it says Patching system image unconditionally... and it loads. after the blue is full it says:
writing static_nvbk image...
patching firmware images...
script succeeded: result was [1.000000]
And when i want to boot into system it says no OS installed.
I tried also to flash this rom or even any other custom rom through ADB Sideload but it does not work. Same like above..
What can i do? I do not know what to do
I hope my phone is not bricked.
Thank you for any suggestion.
Go to oneplus 5 official download page, download stock recovery and latest stock firmware and follow instructions on the download page.... But first with TWRP take a backup of all your data because restoring stock firmware will ERASE everything... Don't panic it will works
First off, don't panic! you're not bricked as long as you can reach your bootloader and recovery.
This happened to me as well and luckily the fix is easy!
You probably tried to flash the OxygenOS build from the Oneplus downloads right?
Somehow these won't flash properly through TWRP and you must therefore also flash the Oxygen recovery image listed in the downloads.
Here are some steps that'll fix your problem.
1 - Backup all of your private data from internal storage because flashing OxygenOS will WIPE/ENCRYPT all data on your device.
2 - Go to the Oneplus download center and download both the latest OxygenOS and it's appropriate recovery:
http://downloads.oneplus.net/oneplus-5/oneplus_5_oxygenos_4.5.8
3 - Boot into your bootloader and flash the stock recovery you just downloaded. (fastboot flash recovery <recovery>.img)
4 - Boot into the Oxygen recovery and flash OxygenOS.
This should get you up and running again.
Once you get tired of OxygenOS simply reboot back into your bootloader and flash TWRP and any rom of your liking.
In the future if you want to flash OxygenOS from TWRP you have to grab a build from XDA I guess. I'm not entirely sure why flashing from within TWRP won't work with stock OOS but I believe it expects to be flashed from withing the stock recovery.
I'm pretty confident this will solve your problems.
Please backup your data first though, don't want anything to get messed up in there!
Good luck!
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
manuelbvb said:
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
Click to expand...
Click to collapse
It is possible to have both OxygenOS and TWRP for sure!
Only a clean flash from a non-encrypted state in TWRP seems to break stuff. You can use a modified OOS build from the forums.
TWRP can indeed backup your OOS install so that shouldn't be a problem.
The only exception seems to be flashing a clean install of OxygenOS (from Oneplus Download center) through TWRP.
Other than that everything works as expected.
Ok thank you.
So i will follow you instructions and i hope it will work.
And i think so.
And after it i will install TWRP again (because i need the backup tool), i will install magisk. will this work?
So i can use everything as in a custom rom, but cannot make a clean install? So official Oneplus OTA will work with TWRP or not?
Thank you soooo much!
Also, Magisk/root works just fine on OxygenOS.
Once you flashed OOS from the stock recovery and have everything set up simply boot into your bootloader and flash TWRP.
From there you flash Magisk and everything should be fine.
OTA's from Oneplus also install fine through TWRP as long as you go into Magisk and uninstall 'root' first. When OxygenOS tells you there's an update simply remove Magisk as I said above and it'll update fine.
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
manuelbvb said:
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
Click to expand...
Click to collapse
First off! YAY!! glad it worked out!
Be sure to use the TWRP build from the twrp.me website. The one listed on these forums are 'unofficial'. Not saying those are bad, but the official one has a pretty impressive track-record.
After flashing Magisk you are root-enabled so yeah, congrats you are now root! In order to pass safetynet you must enable 'magisk hide' in the magisk manager (the app that should now be installed on your phone).
If you do not have an app called 'magisk manager' then you can download this app from the magisk forums. It should however install itself while flashing the Magisk zip. So assuming you have it installed find the 'magisk hide' service and enable it.
From my experience you sometimes need to reboot in order for it to pass safetynet check.
Glad it all worked out for you!
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
manuelbvb said:
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
Click to expand...
Click to collapse
That's great to hear!
Enjoy and take care!
no os
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
xda___ said:
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
Click to expand...
Click to collapse
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Zocker1304 said:
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Click to expand...
Click to collapse
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
xda___ said:
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
Click to expand...
Click to collapse
Well just flash a different twrp via fastboot flash recovery *path to file*
I am trying to re-root my SM-T380 after updating to Pie and am following the latest process per [TWRP 3.2.1-1] [ROOT] Tab A SM-T380/T385 - 10/02/2018 but am running into some issues with steps 3 & 4.:
Boot to TWRP
Format the Data partition (not wipe) using the FORMAT DATA button under Wipe options
Install the memory decryption patch
Assume this is the file found in Ashyx's siganture Samsung encryption disable patch but I can't find any mirrors when trying to download it. Is this the right file for the memory decryption patch?
Install the modified kernel
The file for the SM-T380 found in this post appears to be for the T380DXU3CSI5 but the current stock image is T380DXU3CSL2 for the latest firmware installation (Jan 2020 security patch). I assume a new kernel is needed for this latest version. Is that the case? Also, the file is in tar format but need in zip format to flash in TWRP. Is it as simple as repackaging the tar into a zip file instead?
Install Magisk
Thanks for the help!
I will write out what I just got to work with the latest update of Android Pie for the Samsung Galaxy Tab A T380 running T380DXU3CSL2, security patch January 2020. I have tried all of the methods on the main TWRP/Root thread (which is now closed) and only had success with one.
To clarify, yes - using the patched boot.img from ashyx that was made from T380DXU3CSI5 WILL work with T380DXU3CSL2 (latest as of time of writing) just fine. Make sure to flash Stock first and OEM Unlock.
Ashyx does give some files still needed in his/her first post on the main TWRP thread, but the boot image and the DM-verity are buried within a 66 page thread. Out of respect for ashyx's wishes I will not direct link to files. Get TWRP from the first post here. The patched boot image and DM verity no encrypt get from the guide here by user zfk110. Pg. 65 of the TWRP thread. The guide itself did not work for me though. Just grab the files.
So, files you will need:
>twrp_3.2.3-1_sm-t380_oo_4119.tar (TWRP)
>T380DXU3CSI5_patched_boot_111119.tar (boot.img inside the .tar)
>Latest Magisk version here
>Tab_A_2017_Pie_forced+encryption_disabler-1.zip (no-verity-no-encrypt)
Not only have I found RMM Bypass unnecessary, but in my many trials I think maybe it was causing an issue for me. Perhaps someone much smarter than I can explain, but there is no setting in build.prop to need it - I did check.
TWRP/Root:
>Flash TWRP with Odin with "Auto Reboot" setting turned off: (file: twrp_3.2.3-1_sm-t380_oo_4119.tar in AP slot)
>Boot straight to TWRP (home + vol down + power to get out of download mode then as soon as the screen flashes swap to home + vol up + power),
>In TWRP main menu press "Wipe" and the "Format Data", type "yes" to proceed.
>Reboot to TWRP by going back to main menu of TWRP, select "Reboot" then "Recovery"
>Install boot.img to your boot partition from your external SD card in TWRP (there is a YT video how to do this within TWRP if you need help, just Google it. The file you need is: T380DXU3CSI5_patched_boot_111119.tar then extract boot.img from that for TWRP (use ZArchiver or a program that will unzip .tar). It MUST be in .img to install it with the TWRP "Image" button. TWRP won't even read that the .tar is there, and I don't recommend Odin for this)
>Install Magisk from your external SD card (I used the latest, 20.4 just fine)
>Install the DM-Verity Forced Encryption Patch from your external SD card (file: Tab_A_2017_Pie_forced+encryption_disabler-1.zip)
>Wipe Cache and Dalvik
>Reboot to System
Notes:
Boot image must be first before flashing the others. I tried it after Magisk et.al as with a number of people's directions and several other configurations in addition both in TWRP and with Odin (and the other boot image as well on the thread: t380_boot_pp.img - no luck on XSA for me at least) and it caused a bootloop every time. I don't know why. The smart guys are on the TWRP thread but it's closed (and confusing). I just try things.
To the other OP question here - use the later version of the DM-verity patch - the original one (no-verity-no-encrypt_ashyx) you are referring to is a different size and structure (I have it archived) so it is probably necessary to use the Tab_A_2017_Pie_forced+encryption_disabler-1.zip. It's on pg.65 on zfk110's guide that I linked above (though again, the guide itself did not work for me).
Edit: I know someone could find this method out from the big thread but I know what it is like to feel newby and get confused and want to give up. And the number of different methods and files on that dang thread was a bit maddening honestly and frequently in direct conflict with each other.
Thank you for the guide Winston Churchill, I tried following it for my device Samsung Tab A T380 (build T380DXU3CTH4) but I am stuck at installing Magisk. The patched boot.img is installed successfully but when I go to the system and Magisk does not appear so I have to install it manually with Magisk.apk file. Then when I check the status it says "Installed N/A, Ramdisk Yes, A/B No, SAR No" and root is not active.
I really appreciate any help on this!!
Many thanks Winston Churchill, this worked for me after many failed efforts using other methods and procedures.
Just one or two cautions, as I had to go through the process twice -- because the first time I got locked out with an "unauthorized" firmware notice on the first reboot. I'm not sure if it was because I did not flash the RMM Bypass the first time, or I didn't make sure my OEM Unlock was showing after flashing TWRP, etc. At any rate, I ended up with the RMM Prenormal state.
So I started over . . .
- Odin-flashed my Pie version 3CSI5 one more time
- Setup, went through the time and software update thing to get OEM Unlock to show, and enabled USB Debugging
- Odin-flashed twrp_3.2.3-1_sm-t380_oo_4119.tar
- In TWRP, ran Format Data, rebooted recovery and Formatted again (this has been necessary or advised for other Samsung devices in the past, so I did it here too)
- Then flashed in TWRP:
--- (1) boot.img
--- (2) Magisk 20.4
--- (3) Tab_A_2017_Pie_forced+encryption_disabler-1.zip
--- (4) RMM-State_Bypass_Mesa_v2.zip.
- Wiped Dalvik and Cache
- Rebooted to system
- Made sure OEM Unlock showed and USB Debugging was enabled
- Installed Magisk Manager 7.5.1
- Opened Magisk Manager and made sure Magisk was installed (sometimes it takes a reboot to see Magisk, and sometimes I've actually had to go back into TWRP and reflash it).
All good. So I installed my usual root-needed apps, Speed Software Root explorer, Titanium Backup, Adaway and Power Toggles. All are now rooted and working (including Titanium Backup!!!) and my Android Pie appears to be very stable. Soooo . . . quickly back to TWRP to run a Backup in case something breaks!
I have never had so much trouble rooting any Android device before. The T380 is a nice size and very nice weight, but man oh man . . . I was beginning to wonder if I would ever get it rooted. I can't tell you how much I appreciate (finally) finding this thread and specifically your post.
Moondroid said:
Many thanks Winston Churchill, this worked for me after many failed efforts using other methods and procedures.
Just one or two cautions, as I had to go through the process twice -- because the first time I got locked out with an "unauthorized" firmware notice on the first reboot. I'm not sure if it was because I did not flash the RMM Bypass the first time, or I didn't make sure my OEM Unlock was showing after flashing TWRP, etc. At any rate, I ended up with the RMM Prenormal state.
So I started over . . .
- Odin-flashed my Pie version 3CSI5 one more time
- Setup, went through the time and software update thing to get OEM Unlock to show, and enabled USB Debugging
- Odin-flashed twrp_3.2.3-1_sm-t380_oo_4119.tar
- In TWRP, ran Format Data, rebooted recovery and Formatted again (this has been necessary or advised for other Samsung devices in the past, so I did it here too)
- Then flashed in TWRP:
--- (1) boot.img
--- (2) Magisk 20.4
--- (3) Tab_A_2017_Pie_forced+encryption_disabler-1.zip
--- (4) RMM-State_Bypass_Mesa_v2.zip.
- Wiped Dalvik and Cache
- Rebooted to system
- Made sure OEM Unlock showed and USB Debugging was enabled
- Installed Magisk Manager 7.5.1
- Opened Magisk Manager and made sure Magisk was installed (sometimes it takes a reboot to see Magisk, and sometimes I've actually had to go back into TWRP and reflash it).
All good. So I installed my usual root-needed apps, Speed Software Root explorer, Titanium Backup, Adaway and Power Toggles. All are now rooted and working (including Titanium Backup!!!) and my Android Pie appears to be very stable. Soooo . . . quickly back to TWRP to run a Backup in case something breaks!
I have never had so much trouble rooting any Android device before. The T380 is a nice size and very nice weight, but man oh man . . . I was beginning to wonder if I would ever get it rooted. I can't tell you how much I appreciate (finally) finding this thread and specifically your post.
Click to expand...
Click to collapse
So many conflicting instructions - Why exactly are people flashing this modified boot image and then magisk? Correct me if Im wrong, but isnt that what installing magisk DOES (patches the boot image) when you rename the magisk apk to a zip and install in TWRP? I only FINALLY got this working after I ignored the patched boot.img step completely and simply - flash twrp in odin, reboot rocovery, format data, reboot recovery, flash magisk, disable verity whatever, reboot system..
Dick_Stickitinski said:
So many conflicting instructions . . .
. . . isnt that what installing magisk DOES (patches the boot image) when you rename the magisk apk to a zip and install in TWRP? . . .
Click to expand...
Click to collapse
Magisk patches boot.img for Root access. Sometimes there are also other reasons for flashing a boot.img. I'm not an Android coder so I can't explain every reason why flashing boot.img might be necessary in this case.
. . . "rename the magisk apk to a zip" . . . you renamed a Magisk Manager apk to "zip" for flashing in TWRP? How did that work?
At any rate, my method worked for me and yours (however you actually did it) worked for you. I can say for sure that Android itself can be quirky, for example, my recent experiences with a Galaxy S9 on Pie where, after reflashing the exact same build 5-6 times -- because trying to set a security PIN for some screwy reason kept crashing the system (?!!) -- from one reflash to the next I got different app-disabling experiences. For example, a few built-in apps (like google movies etc) showed the option to Uninstall instead of the expected Disable. The same generic reason why an S8 G950U on Pie v8 can be rooted successfully using @jrkruse's Extreme Syndicate method, and other S8 G950s on Pie v8 will brick. Quirky? Weird, I don't know, can't explain, I just go with the flow as it flows and count my blessings when it works.
Moondroid said:
. . . "rename the magisk apk to a zip" . . . you renamed a Magisk Manager apk to "zip" for flashing in TWRP? How did that work?
Click to expand...
Click to collapse
Yeah, you can rename the APK to zip & flash it in TWRP
The Magisk Manager APK can now be flashed from within TWRP
Magisk is now distributed as part of the Manager APK, meaning you no longer need to flash a separate ZIP file from a custom recovery.
www.xda-developers.com
However, I spoke too soon... I got it to stop bootlooping and actually got it to boot into system, and magisk manager is installed, but still not rooted. When flashing magisk in recovery again (or even extracting the boot.img & patching it in magisk manager, it recognizes it as a magisk-patched boot.img, but it's still not rooted. This tablet is frustrating the hell out of me, I'm about to say the hell with it & toss it.
Dick_Stickitinski said:
Yeah, you can rename the APK to zip & flash it in TWRP
The Magisk Manager APK can now be flashed from within TWRP
Magisk is now distributed as part of the Manager APK, meaning you no longer need to flash a separate ZIP file from a custom recovery.
www.xda-developers.com
Click to expand...
Click to collapse
As of January last year, okay. On older phones/tabs I almost always go with older Magisk versions that were more current with the older device's firmware.
Dick_Stickitinski said:
However, I spoke too soon... I got it to stop bootlooping and actually got it to boot into system, and magisk manager is installed, but still not rooted. When flashing magisk in recovery again (or even extracting the boot.img & patching it in magisk manager, it recognizes it as a magisk-patched boot.img, but it's still not rooted. This tablet is frustrating the hell out of me, I'm about to say the hell with it & toss it.
Click to expand...
Click to collapse
Just a suggestion, maybe try using an older Magisk. I flashed Magisk v20.4 in TWRP and Magisk Manager v7.5.1 after booting to system. Older Magisk (zip and Manager) can be found on topjohnwu's GitHub.
Note, doing it this way, I always have to reboot one more time to see Magisk fully installed and working.