Need help here,
SM-N9005 rooted(knox tripped) with leak lollipop BNL8,
i wish to flash others rom but need to keep details in apps
(line,whatsapp,wechat etc)
,how to dirty flash rom,custom/stock all ok.
Thanks you.
1. install titanium backup
2. backup data and move to external sd card or PC.
3. flash other rom
4. wipe data
5. install titanium backup again.
5. restore backup.
toinktoink said:
1. install titanium backup
2. backup data and move to external sd card or PC.
3. flash other rom
4. wipe data
5. install titanium backup again.
5. restore backup.
Click to expand...
Click to collapse
Will the TB backup all the chat details in line/whatspp/wechat/sms?
Thx
normally it would backup everything, and upon restore it's like nothing's you've never wiped your data.
Hello everyone.
I am new owner of an S7 Edge and so I root it is ok!
I have installed a recovery version 3.0.2.4 this is ok too but I have a concern to make a full backup.
1 - When starting recovery I have a screen that says "Installing zips or operations via adb may change the system partition".
2 - When I want to do a backup I have these 03 options that are checked.
Booting
System
Data
But when I drag to make this backup I have error messages
Here are the images to better understand.
I think I have forgotten something, could you orient me please?
Thank you for your help.
encrypted data...... so if you want do a backup try out flashfire......
Working fine with flashfire !!
But there is still the solution of real recovery?
How to decrypt the data?
To make a backup?
Thanx !
1. Reboot to TWRP, Wipe > Format Data > Type 'yes'. This will wipe all the data on your phone including internal storage.
2. Don't reboot, and flash either SuperSU or one of the zips from here (latest version would be preferred). Since you have to wipe your internal storage in the previous step, put the zip in your external sdcard beforehand or flash it through adb sideload if you know how to.
Be careful when flashing stock firmware with odin, as it will automatically encrypt your device again. After you flash stock firmware, reboot directly into download mode again, flash TWRP, reboot to TWRP, and then follow step 2.
Hi !
I will download a stock rom in case of problem and I come back to give the results.
Big thanks !!! :good: :good:
kykint said:
1. Reboot to TWRP, Wipe > Format Data > Type 'yes'. This will wipe all the data on your phone including internal storage.
2. Don't reboot, and flash either SuperSU or one of the zips from here (latest version would be preferred). Since you have to wipe your internal storage in the previous step, put the zip in your external sdcard beforehand or flash it through adb sideload if you know how to.
Be careful when flashing stock firmware with odin, as it will automatically encrypt your device again. After you flash stock firmware, reboot directly into download mode again, flash TWRP, reboot to TWRP, and then follow step 2.
Click to expand...
Click to collapse
Work perfectely very very good !
Thanks for answers !!
#Newupdate MIUI8.2 8.2.1.0 Global Stable for MimaxPro
http://bigota.d.miui.com/V8.2.1.0.MBDMIDL/miui_MIMAX652Global_V8.2.1.0.MBDMIDL_9060ae09fa_6.0.zip
ota 8.1.9.0-8.2.1.0
http://bigota.d.miui.com/V8.2.1.0.M...0.MBDMIDI-V8.2.1.0.MBDMIDL-b2511afedf-6.0.zip
formimax650
FullRom http://bigota.d.miui.com/V8.2.1.0.MBCMIDL/miui_MIMAXGlobal_V8.2.1.0.MBCMIDL_ad2db3ac36_6.0.zip
Does it work on mi max 32g global? Thanks in advance
Nano23 said:
Does it work on mi max 32g global? Thanks in advance
Click to expand...
Click to collapse
Yes, it should do.
Note:
Update for Mi Max / Redmi 1S suspended
http://en.miui.com/thread-501418-1-1.html
Waiting for fix the bugs
Plz. Which one is for mi max 32g global version?
---------- Post added at 12:11 AM ---------- Previous post was at 12:10 AM ----------
And how to update i am in miui 8 1.6.0
On my 32GB Global, i had OTA notification for v8.2.1.0 when i was on v8.1.6.0
Downloaded using upgrade tool, installation is ok.
Easily rooted using TWRP after.
I have no information about upgrade mi max plz can somone explain step by step how to do
Thank you very much! Full ROM work like a charm on Mi Max 3/32GB.
It's Android Nougat ?
bortoloj said:
It's Android Nougat ?
Click to expand...
Click to collapse
No, it's Marshmallow 6.0.1.
Why full rom is still unavailable for Fastboot mode ?
How can i install this with TWRP and keep TWRP and keep root and keep my unencrypted internal storage?
Is it rooted or my Mi Max root will be gone, thanks
Well, full ROM is not rooted, that's for sure. If you want to install it, do a backup before with TWRP on Micro SD. It is very recomended. If something goes wrong then you can restore your system.
For CLEAN INSTALL, on Mi Max 3/32 GB, I followed theese steps. By doing this, you will loose all your previously apps and data:
1. Download and Copy full ROM from first post on Micro SD (miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip).
2. Download and Copy SR3-SuperSU-v2.79-SR3-20170114223742.zip on Micro SD. Can be found here: download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
3. Download and Copy Install lazyflasher-no-verity-opt-encrypt.zip (a script to disable dm-verity and forced encryption) on Micro SD. Can be found here: en.miui.com/thread-310923-1-1.html
4. Boot into TWRP.
5. Mount System, Data, Cache, Internal Storage, Micro SD.
6. Advanced WIPE -> Select Dalvik/ART Cache, System, Data, Cache, Internal Storage. Swipe to WIPE.
7. Install miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip from Micro SD.
8. Install SR3-SuperSU-v2.79-SR3-20170114223742.zip from Micro SD.
9. Install lazyflasher-no-verity-opt-encrypt.zip from Micro SD.
10. WIPE DALVIK & CACHE.
11. Reboot to System.
If device automatically reboot after step 8, reboot again in TWRP (by continuously pressing Power + Volume Up until vibrate and then release and wait for TWRP) and continue with step 9, 10 and 11.
Wait 10-20 min for first boot and continue with system setup. You will have SuperSU installed.
This worked for me, but I'm NOT responsible for your actions.
More about MIUI Global Stable ROM 8.2 Fastboot and Recovery versions here: en.miui.com/thread-508000-1-1.html (Changelog and Download links).
Tried it, still on Android 6. Not much different.
Will try the beta 7.2.16.
Can NOT install MultiRom.ME
HawkXP said:
Well, full ROM is not rooted, that's for sure. If you want to install it, do a backup before with TWRP on Micro SD. It is very recomended. If something goes wrong then you can restore your system.
For CLEAN INSTALL, on Mi Max 3/32 GB, I followed theese steps. By doing this, you will loose all your previously apps and data:
1. Download and Copy full ROM from first post on Micro SD (miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip).
2. Download and Copy SR3-SuperSU-v2.79-SR3-20170114223742.zip on Micro SD. Can be found here: download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
3. Download and Copy Install lazyflasher-no-verity-opt-encrypt.zip (a script to disable dm-verity and forced encryption) on Micro SD. Can be found here: en.miui.com/thread-310923-1-1.html
4. Boot into TWRP.
5. Mount System, Data, Cache, Internal Storage, Micro SD.
6. Advanced WIPE -> Select Dalvik/ART Cache, System, Data, Cache, Internal Storage. Swipe to WIPE.
7. Install miui_MIMAXGlobal_V8.1.6.0.MBCMIDI_1e6706b520_6.0.zip from Micro SD.
8. Install SR3-SuperSU-v2.79-SR3-20170114223742.zip from Micro SD.
9. Install lazyflasher-no-verity-opt-encrypt.zip from Micro SD.
10. WIPE DALVIK & CACHE.
11. Reboot to System.
If device automatically reboot after step 8, reboot again in TWRP (by continuously pressing Power + Volume Up until vibrate and then release and wait for TWRP) and continue with step 9, 10 and 11.
Wait 10-20 min for first boot and continue with system setup. You will have SuperSU installed.
This worked for me, but I'm NOT responsible for your actions.
More about MIUI Global Stable ROM 8.2 Fastboot and Recovery versions here: en.miui.com/thread-508000-1-1.html (Changelog and Download links).
Click to expand...
Click to collapse
Hi there,
I can not install any version of MultiRom.me ROM, except this one v8.0.1.0 Global Stable. Here is the detail of my weird issue.
A. What do you have?
Mimax 3/32GB with working TWRP 3.0.3-0
https://dl.twrp.me/hydrogen/twrp-3.0.3-0-hydrogen.img
v8.0.1.0 Global Stable ROM flashable .zip file (1)
http://ua.multirom.me/MROTA/STABLE/V8/V8.0/multirom_MIMAX_V8.0.1.0.MBCCNDG_v6.0.1_b13_e685363f8e.zip
v8.2.2.0 Global Stable ROM flashable .zip file (2)
https://vroms2fe7lh.multirom.me/MRO...AX_V8.2.2.0.MBCCNDL_v6.0.1_b24_8c9ad51076.zip
SuperSU 2.79 flashable .zip file (3)
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
B. What process did you use?
Booted to TWRP
Wiped fully (system, data, cache, davik cache)
Installed ROM (saved in USB OTG)
Installed SuperSU (saved in USB OTG)
Wiped Cache & Davik Cache
Rebooted
C. What is your issue?
If I used the combo (1), (3) and process (B), everything worked well w/o any problem. But,
If I used the combo (2), (3) and process (B), it could not boot up. The Mi logo lighted on in 1s and shutdown immediately later whenever I pressed power button.
In addition, I could not boot into TWRP too.
Now I've been in rom (1) with working TWRP, and still could not flash rom (2).
Kindly help me explain it and show me how to solve this issue.
Thanks and Best Regards,
[email protected]
Hello,
I tried to download v8.2.2.0 Global Stable ROM flashable .zip (2) but I could not access the file (forbidden). So I have no way to test the installation.
Try this:
1. Boot into TWRP.
2. Wipe (system, data, cache, davik cache and internal storage).
3. Install ROM.
4. Go to Mount -> Select , Deselect and Select againSystem. Let it selected.
5. Go to Advanced -> File Manager -> Go to System folder. In root of System it's a file: recovery-from-boot.p. Delete it. In this way, you will not loose TWRP.
6. Go back and install SuperSU.
7. Wipe Cache & Davik Cache.
8. Reboot.
It is possible for the device to auto reboot 2-3 times until the system will load.
See if this will help you.
I followed the following steps to flash oos 5.0.1 :
1. Update TWRP to the latest Codeworkx TWRP from the link posted
2. Reboot Recovery and Take a Nandroid of your existing ROM just in case you need it
3. Wipe > Advance Wipe > Select Dalvik & Cache > Swipe to Wipe
4. Install Menu > Select OOS 5.0.1 Full Rom Zip > Swipe to Flash
5. Flash Magisk 15.2 (Recommended for Root)
6. Wipe Dalvik & Cache
7. Reboot Recovery to make sure TWRP stays
8. Reboot System once recovery boots again.
i did this on my op5 rooted and encrypted .
so i followed all the steps precisely but in the end when i tried to boot into system it bootlooped (waited for hours to see if it really takes time on first boot). also when i open file manager in twrp it just shows weird long file names .
Yes I experienced the same thing too. I presume it's a problem with decryption after the update. I had removed all lockscreen security before updating (for nandroid). Maybe it was due to that? Would like someone to elaborate too.
r.sharma said:
I followed the following steps to flash oos 5.0.1 :
1. Update TWRP to the latest Codeworkx TWRP from the link posted
2. Reboot Recovery and Take a Nandroid of your existing ROM just in case you need it
3. Wipe > Advance Wipe > Select Dalvik & Cache > Swipe to Wipe
4. Install Menu > Select OOS 5.0.1 Full Rom Zip > Swipe to Flash
5. Flash Magisk 15.2 (Recommended for Root)
6. Wipe Dalvik & Cache
7. Reboot Recovery to make sure TWRP stays
8. Reboot System once recovery boots again.
i did this on my op5 rooted and encrypted .
so i followed all the steps precisely but in the end when i tried to boot into system it bootlooped (waited for hours to see if it really takes time on first boot). also when i open file manager in twrp it just shows weird long file names .
Click to expand...
Click to collapse
As your device is encrypted so first you need to decrypt it so for that just boot into twrp select wipe and select format data and type yes as it will for format your entire data including internal storage... the most first step is to backup your internal storage in pc and apps through titanium backup and save that in pc and later decrypt it once your device is decrypted just enable MTP in twrp and copy files in storage and flash it.
---------- Post added at 04:51 AM ---------- Previous post was at 04:45 AM ----------
r.sharma said:
I followed the following steps to flash oos 5.0.1 :
1. Update TWRP to the latest Codeworkx TWRP from the link posted
2. Reboot Recovery and Take a Nandroid of your existing ROM just in case you need it
3. Wipe > Advance Wipe > Select Dalvik & Cache > Swipe to Wipe
4. Install Menu > Select OOS 5.0.1 Full Rom Zip > Swipe to Flash
5. Flash Magisk 15.2 (Recommended for Root)
6. Wipe Dalvik & Cache
7. Reboot Recovery to make sure TWRP stays
8. Reboot System once recovery boots again.
i did this on my op5 rooted and encrypted .
so i followed all the steps precisely but in the end when i tried to boot into system it bootlooped (waited for hours to see if it really takes time on first boot). also when i open file manager in twrp it just shows weird long file names .
Click to expand...
Click to collapse
Here is the simplest one for you
https://forum.xda-developers.com/oneplus-5/how-to/official-oxygen-os-5-0-problems-rooted-t3724616
Format data is must required for booting.
I was also rooted and encrypted using 4.5.15 and this is the method I followed and it worked:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Hello Guys,
After flashing few pie roms and few GSI I faced really big trouble. When we flash rom we must install erecovery and factory format data. After doing this we loose everything on our internal memory. And this is very headaches. :silly:
So I search many times " How to flash pie roms without wiping internal storage" Finally I figure out a method. Some times you know about this, Some times you don't know about this. Pls let me guide.
• I do not responsible for bricked devices, dead SD cards
We call this "Universal DM-Verity, ForceEncrypt, Disk Quota Disablers"
Link here - https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389/amp/
Introduction....
• If you're currently encrypted: BACKUP YOUR INTERNAL STORAGE TO YOUR PC.
1- Download zip file
2- Reboot to recovery, Then format data.
3- Reboot back into recovery
4- After doing that or if you're not encrypt anymore
5- Make a backup using TWRP ( Ramdisk,Vendor)
6- Wipe required partitions(If you want)
7- Flash your rom, custom kernel (if applicable), then this zip, the magisk/supersu/other root, then Gapps
8- Most important part after flashing rom, You must factory reset using twrp. (TWRP -> Wipe -> slide Left to Right)
• This zip should be flashed after anything that modifies your boot img (like a custom kernel) but before magisk/supersu since this zip creates the files that tells magisk/supersu to not encrypt.
Congratulations now you don't need bootloader for flash roms... :laugh: Feel Free
Credits - @Zackptg5