Cant flash anything on SM-G950U - Samsung Galaxy S8 Questions and Answers

I bought this device online and it ended up being google locked. In my efforts to still be able to use the phone, I flashed Factionary Binary onto the phone as instructed by a tutorial to remove the FRP lock. After doing this i thought i would just simply flash stock firmware, oh boy was I wrong. I have tried so many different things over the course of hours with no luck. odin fails every single time. Can anyone help please?
Not sure what kind of information you will need, but heres a few specs that might be helpful
Model Number: SM-G950U
Android Version: 7.0
Baseband Version: G590USQU5CRF1
Build Number: NRD90M.FA70_G95USQU5ARG4

OfficialPyroh said:
I bought this device online and it ended up being google locked. In my efforts to still be able to use the phone, I flashed Factionary Binary onto the phone as instructed by a tutorial to remove the FRP lock. After doing this i thought i would just simply flash stock firmware, oh boy was I wrong. I have tried so many different things over the course of hours with no luck. odin fails every single time. Can anyone help please?
Not sure what kind of information you will need, but heres a few specs that might be helpful
Model Number: SM-G950U
Android Version: 7.0
Baseband Version: G590USQU5CRF1
Build Number: NRD90M.FA70_G95USQU5ARG4
Click to expand...
Click to collapse
You should report that user he wasn't suppose to sell you a phone with the Google verification lock on it that means he hard reseted the phone instead of factory restoring the phone threw settings which then you would of been able to log in with any Google account when you did the setup wizard to setup the phone
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]

PoochyX said:
You should report that user he wasn't suppose to sell you a phone with the Google verification lock on it that means he hard reseted the phone instead of factory restoring the phone threw settings which then you would of been able to log in with any Google account when you did the setup wizard to setup the phone
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
It was my fault going through a shady amazon dealer to get a better deal. I know theres a way to fix this theres just got to be something im doing wrong. FRP lock is disabled. now im stuck with this factionary binary rom which is effectively good for nothing it pretty much is a recovery that isnt really a recovery.

OfficialPyroh said:
It was my fault going through a shady amazon dealer to get a better deal. I know theres a way to fix this theres just got to be something im doing wrong. FRP lock is disabled. now im stuck with this factionary binary rom which is effectively good for nothing it pretty much is a recovery that isnt really a recovery.
Click to expand...
Click to collapse
If it's a Samsung you got to go on sammobie get the latest firmware and install it in Odin if the phone bootloader unlocked you could see if they have twrp for your device but I wouldn't suggest flashing it cause you have to get into developer settings and implement OEM unlock first or else the phone could soft brick
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]

PoochyX said:
If it's a Samsung you got to go on sammobie get the latest firmware and install it in Odin if the phone bootloader unlocked you could see if they have twrp for your device but I wouldn't suggest flashing it cause you have to get into developer settings and implement OEM unlock first or else the phone could soft brick
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
I am able to access settings and i have OEM unlock switched on, sammobile free downloads are down at the moment. Ill go ahead and try to flash twrp and ill let you know if i get any luck from that

OfficialPyroh said:
I am able to access settings and i have OEM unlock switched on, sammobile free downloads are down at the moment. Ill go ahead and try to flash twrp and ill let you know if i get any luck from that
Click to expand...
Click to collapse
Alright keep me posted, you could possibly find your latest firmware on the xda page for your phone in question if it has a big support community phones with twrp usually have support communities
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]

OfficialPyroh said:
I am able to access settings and i have OEM unlock switched on, sammobile free downloads are down at the moment. Ill go ahead and try to flash twrp and ill let you know if i get any luck from that
Click to expand...
Click to collapse
There is no official twrp no boot loader unlock. Flash the test firmware you have. Flip OEM unlock factory reset and flash stock firmware that's how to disable frp.

OfficialPyroh said:
I bought this device online and it ended up being google locked. In my efforts to still be able to use the phone, I flashed Factionary Binary onto the phone as instructed by a tutorial to remove the FRP lock. After doing this i thought i would just simply flash stock firmware, oh boy was I wrong. I have tried so many different things over the course of hours with no luck. odin fails every single time. Can anyone help please?
Not sure what kind of information you will need, but heres a few specs that might be helpful
Model Number: SM-G950U
Android Version: 7.0
Baseband Version: G590USQU5CRF1
Build Number: NRD90M.FA70_G95USQU5ARG4
Click to expand...
Click to collapse
You need usb 2.0 to flash on sm-g950u. I had the same problem until I got a usb 2.0 hub.

Related

Need help asap please - SM-G935W8

So I was setting up my device yesterday and enabled fingerprint unlocking and choose a pattern unlock and written password as backup options.
When I restarted my phone, in order to unlock the phone it stated to use pattern unlock to protect fingerprint scanning after reboots (something of that nature).
Problem is for some reason I cannot figure out the pattern to unlock (I'm sure im using the one i set in place) and I cannot use my written password to unlock either, it's just by pattern.
So am I locked out of my phone and don't know what to do. I'm trying to do a factory reset to see if that'll work.
But I also flashed twrp and noticed that this model cannot be rooted so i left the custom recovery as it is. I do not want to swipe right to "allow modifications" as I heard if I do not install the right files it might be stuck in a continuous loop. So I clicked on Keep Read Only. When I try to wipe it keeps on telling me it's failed is it due to being in read only (I also don't see any of the contents on my internal storage)?
Should I flash the stock recovery with odin but I cannot find it for this model. Can someone point me in the right direction?
Bure03 said:
So I was setting up my device yesterday and enabled fingerprint unlocking and choose a pattern unlock and written password as backup options.
When I restarted my phone, in order to unlock the phone it stated to use pattern unlock to protect fingerprint scanning after reboots (something of that nature).
Problem is for some reason I cannot figure out the pattern to unlock (I'm sure im using the one i set in place) and I cannot use my written password to unlock either, it's just by pattern.
So am I locked out of my phone and don't know what to do. I'm trying to do a factory reset to see if that'll work.
But I also flashed twrp and noticed that this model cannot be rooted so i left the custom recovery as it is. I do not want to swipe right to "allow modifications" as I heard if I do not install the right files it might be stuck in a continuous loop. So I clicked on Keep Read Only. When I try to wipe it keeps on telling me it's failed is it due to being in read only (I also don't see any of the contents on my internal storage)?
Should I flash the stock recovery with odin but I cannot find it for this model. Can someone point me in the right direction?
Click to expand...
Click to collapse
Get it Samsung updates.com. Reflash your firmware
Sent from my Star-Tac
Brava27 said:
Get it Samsung updates.com. Reflash your firmware
Sent from my Star-Tac
Click to expand...
Click to collapse
I checked the site, I`m on Rogers network and do not see a firmware for that region. If i flash it with a telus or N/A region will that still be fine?
Bure03 said:
I checked the site, I`m on Rogers network and do not see a firmware for that region. If i flash it with a telus or N/A region will that still be fine?
Click to expand...
Click to collapse
Yes anyone with G935W8. You might have to pay for faster speed. I did before.
Sent from my Star-Tac
thanks brava, issue has been resolved
I had this issue recently. The Rogers firmware is pretty near impossible to find. I went on a limb and flashed stock bell firmware and it worked absolutely fine! Give it a shot
Sm-g935w8 firmware
Hi, is quite far from last post but for any buddy which looking for Samsung devices firmware I have best site ever! Ofcourse all firmware is genuine and not modified. Any problem with software U can resolve on this site:
sammobile.com
czubi1977 said:
Hi, is quite far from last post but for any buddy which looking for Samsung devices firmware I have best site ever! Ofcourse all firmware is genuine and not modified. Any problem with software U can resolve on this site:
sammobile.com
Click to expand...
Click to collapse
Spamming a 3 year old old post? Whatever for?
Aimless Rambler said:
Spamming a 3 year old old post? Whatever for?
Click to expand...
Click to collapse
Nah - It's their first & only post ever...
I'm thinking that maybe they experienced a "come to Jesus" moment when they discovered the internet.... ??
Sent from my SM-G975W ??

Forgot to activate OEM-Unlock for Root. Phone Bricked: "Custom binary blocked by FRP"

Forgot to activate OEM-Unlock for Root. Phone Bricked: "Custom binary blocked by FRP"
Hello,
today i rooted my J5 (SM-J500FN) via Odin and CF-Auto-Root.
Everyting went well but after the root i unticked OEM-Lock (please dont ask me why i did it) and restarted my phone and this nice screen greeted me: "Custom binary blocked by FRP. SECURE FAIL: KERNEL"
So I tried everything I found on the Web and found nothing really helpful. Then i tried flashing the recovery and reflashing CF-Auto-Root but both got blocked in the Download Mode with the message "FRP Block".
Please can someone help me, i really hope i dont have to reset my phone because my google authenticator is stored on it, and it would be a real pain to write to the support of every account i connected to reset my Security Options.
Thanks, Toby
P.S: when i flash the boot.img does it wipe my device?
Toby9 said:
Hello,
today i rooted my J5 (SM-J500FN) via Odin and CF-Auto-Root.
Everyting went well but after the root i unticked OEM-Lock (please dont ask me why i did it) and restarted my phone and this nice screen greeted me: "Custom binary blocked by FRP. SECURE FAIL: KERNEL"
So I tried everything I found on the Web and found a few things like flashing the recovery. I tried reflashing CF-Auto-Root but both got blocked in the Download Mode with the message "FRP Block".
Please can someone help me, i really hope i dont have to reset my phone because my google authenticator is stored on it, and it would be a real pain to write to the support of every account i connected to reset my Security Options.
Thanks, Toby
P.S: when i flash the boot.img does it wipe my device?
Click to expand...
Click to collapse
Just flash the stock firmware.
ashyx said:
Just flash the stock firmware.
Click to expand...
Click to collapse
Doesn't it reset my phone?
I saw a video about it but after he started the phone the device setup greeted him...
Toby9 said:
Doesn't it reset my phone?
I saw a video about it but after he started the phone the device setup greeted him...
Click to expand...
Click to collapse
It will reset it...
Try using Smart Switch from Samsung to backup you stuff and accounts. Maybe it will work. Using Smart Switch you can also easily reflash the latest Marshmallow firmware.
Amarius1 said:
It will reset it...
Try using Smart Switch from Samsung to backup you stuff and accounts. Maybe it will work. Using Smart Switch you can also easily reflash the latest Marshmallow firmware.
Click to expand...
Click to collapse
And if i only flash the boot.img which is inside the firmware archive? would that be "save" to try?
Toby9 said:
And if i only flash the boot.img which is inside the firmware archive? would that be "save" to try?
Click to expand...
Click to collapse
I don't know about that... Try asking someine more experienced.
I do know that even in Recovery mode the ROM locks you out and doesn't let you factory reset for example
Amarius1 said:
I don't know about that... Try asking someine more experienced.
I do know that even in Recovery mode the ROM locks you out and doesn't let you factory reset for example
Click to expand...
Click to collapse
Ok thank you I just went for the boot.img flash and it worked! puh im relieved
Now you know that it does not reset.
I will write a guide to finally get rid of this stupid FRP error once and for all!
Toby9 said:
Ok thank you I just went for the boot.img flash and it worked! puh im relieved
Now you know that it does not reset.
I will write a guide to finally get rid of this stupid FRP error once and for all!
Click to expand...
Click to collapse
Congrats! Had the sane problem last summer and I had to completely reset it...
(Btw why thank you? I didn"t do anything ???)
Toby9 said:
Ok thank you I just went for the boot.img flash and it worked! puh im relieved
Now you know that it does not reset.
I will write a guide to finally get rid of this stupid FRP error once and for all!
Click to expand...
Click to collapse
I did a guide in past: https://forum.xda-developers.com/showpost.php?p=68408932&postcount=65 . I'll add it to the new Q&A thread after I'll update that thread (when I'll have time).
Feel free to do a new guide.
Toby9 said:
Doesn't it reset my phone?
I saw a video about it but after he started the phone the device setup greeted him...
Click to expand...
Click to collapse
No it does not. You are not affecting the data partition.
This would only happen if you flashed the factory repair firmware.
Thank you all. Here is my Guide: https://forum.xda-developers.com/android/general/complete-guide-to-rid-custom-binary-t3541403
It is generally for all (Samsung) Smarphones as i believe that it wont be any different.
Amarius1 said:
Congrats! Had the sane problem last summer and I had to completely reset it...
(Btw why thank you? I didn"t do anything )
Click to expand...
Click to collapse
Im just glad it worked
Toby9 said:
Thank you all. Here is my Guide: https://forum.xda-developers.com/android/general/complete-guide-to-rid-custom-binary-t3541403
It is generally for all (Samsung) Smarphones as i believe that it wont be any different.
Im just glad it worked
Click to expand...
Click to collapse
Happy for you ^^
When activating the oem unlock you can install Twrp, kernel or custom rom without the activation of FRP security that is activated when you establish a security pattern in the device
When the binary is blocked by the FRP you must install the factory firmware, then enter the recovery and do a factory reset since the FRP prevents external access to the system and data as prevention
You will be prompted for the email and password of the previously used account
Demicro said:
When activating the oem unlock you can install Twrp, kernel or custom rom without the activation of FRP security that is activated when you establish a security pattern in the device
When the binary is blocked by the FRP you must install the factory firmware, then enter the recovery and do a factory reset since the FRP prevents external access to the system and data as prevention
You will be prompted for the email and password of the previously used account
Click to expand...
Click to collapse
You only need to enter your login details if you factory reset.
Flashing the stock firmware is enough to remove frp. No need to factory reset.
ashyx said:
You only need to enter your login details if you factory reset.
Flashing the stock firmware is enough to remove frp. No need to factory reset.
Click to expand...
Click to collapse
This problem I had several months ago, I did not remember well. You are right ?
custom binary blockby frp lock on samsung j510gn
ashyx said:
Just flash the stock firmware.
Click to expand...
Click to collapse
hi. i really need help with this. tried several times flashing stockrom using different versions of odin and trying out several firmwares. always result: FAIL. Its a company phone. I honestly didn't do anything with it. Went to bed, next day woke up with the phone off. when I turned it on, bam! custom binary message.
MoximuZ said:
hi. i really need help with this. tried several times flashing stockrom using different versions of odin and trying out several firmwares. always result: FAIL. Its a company phone. I honestly didn't do anything with it. Went to bed, next day woke up with the phone off. when I turned it on, bam! custom binary message.
Click to expand...
Click to collapse
Can you send the logs u get from odin? Also make sure u got the correct model of stock rom for ur device.
I also have frp lock om my phone. It will not boot past maim boot screen. I cannot install twrp due to cuatom binary blocked error. Adb doesnt recognkze my phone either. Odin does, i installed the stock firmware and still will not reboot. Any suggestions or thoughts?? I havent tried to turn oem yet via android studio. Currently in the middle of that. Please help
ndiddy88 said:
I also have frp lock om my phone. It will not boot past maim boot screen. I cannot install twrp due to cuatom binary blocked error. Adb doesnt recognkze my phone either. Odin does, i installed the stock firmware and still will not reboot. Any suggestions or thoughts?? I havent tried to turn oem yet via android studio. Currently in the middle of that. Please help
Click to expand...
Click to collapse
Which device? Don't you know your Google login details?

Eng Mode

Jack_Sparrow_Thats_Very_Interesting.gif
I've come into possession of a device with something displaying in Download mode that I've never seen before - on any Samsung device. All of the threads that I've found on rooting or BL unlocking have been closed. Is there anyone still around who knows enough to help me reverse engineer this? @Acoustichayes @BotsOne @elliwigy
iBowToAndroid said:
Jack_Sparrow_Thats_Very_Interesting.gif
I've come into possession of a device with something displaying in Download mode that I've never seen before - on any Samsung device. All of the threads that I've found on rooting or BL unlocking have been closed. Is there anyone still around who knows enough to help me reverse engineer this? @[email protected]@elliwigy
Click to expand...
Click to collapse
just saw ur message lol.. if u dont mind me asking, whered u get it from lol..
either way, you have an S8 with eng mode enabled. Typically on newer phones there are eng certs or "tokens" that can be flashed to the device enabling eng mode and allowing custom firmware.. the certs are pretty much impossible to find unless ur in good with samsung or pay a good amount of money for..
to my knowledge, they are device specific also. meaning no way to pull the cert/token to use on other devices..
i could be wrong but based on @partcyborg coming across a similar eng mode that is what i have learned lol
elliwigy said:
just saw ur message lol.. if u dont mind me asking, whered u get it from lol..
either way, you have an S8 with eng mode enabled. Typically on newer phones there are eng certs or "tokens" that can be flashed to the device enabling eng mode and allowing custom firmware.. the certs are pretty much impossible to find unless ur in good with samsung or pay a good amount of money for..
to my knowledge, they are device specific also. meaning no way to pull the cert/token to use on other devices..
i could be wrong but based on @partcyborg coming across a similar eng mode that is what i have learned lol
Click to expand...
Click to collapse
It's cert based? Damn. Thought maybe it was another bootloader partition that isn't in the BL Odin tar. I didn't think the cert carried anything other than the IMEI. But I guess that's a foolproof way to do it, since it's coded according to the CPID. And no, they can't be read from the device. Guess we're stuck...
iBowToAndroid said:
It's cert based? Damn. Thought maybe it was another bootloader partition that isn't in the BL Odin tar. I didn't think the cert carried anything other than the IMEI. But I guess that's a foolproof way to do it, since it's coded according to the CPID. And no, they can't be read from the device. Guess we're stuck...
Click to expand...
Click to collapse
pm me,would like to chat on hangouts or tgram n check afew things to be sure
Sent from my SM-G965U using Tapatalk
iBowToAndroid said:
It's cert based? Damn. Thought maybe it was another bootloader partition that isn't in the BL Odin tar. I didn't think the cert carried anything other than the IMEI. But I guess that's a foolproof way to do it, since it's coded according to the CPID. And no, they can't be read from the device. Guess we're stuck...
Click to expand...
Click to collapse
elliwigy said:
pm me,would like to chat on hangouts or tgram n check afew things to be sure
Sent from my SM-G965U using Tapatalk
Click to expand...
Click to collapse
Whoa whoa whoa guys.
I want in You know I know a bit about the certs lol having bricked and restored mine several times lol:silly::silly::silly:
TheMadScientist said:
Whoa whoa whoa guys.
I want in You know I know a bit about the certs lol having bricked and restored mine several times lol:silly::silly::silly:
Click to expand...
Click to collapse
I don't have it anymore
iBowToAndroid said:
I don't have it anymore
Click to expand...
Click to collapse
You know it sucks too I know several people with s8 or 9 maybe even a note 8 or 9 with Eng certs and unlocked bootloader on Snapgragon U model Makes me jealous
Wish we could find a way to copy or something with em
TheMadScientist said:
Whoa whoa whoa guys.
I want in You know I know a bit about the certs lol having bricked and restored mine several times lol:silly::silly::silly:
Click to expand...
Click to collapse
Hello guys,
I own a SM-N960F ENG MODE: DEV DEVICE which is in "custom binary blocked by frp lock". I have tried to flash all sorts of firmware including the latest stock version CSDE to no avail. ODIN passes it successfully but when it tries to reboot it goes again into "custom binary blocked by frp lock"
Hope you might shed some light...
besmirgogu said:
Hello guys,
I own a SM-N960F ENG MODE: DEV DEVICE which is in "custom binary blocked by frp lock". I have tried to flash all sorts of firmware including the latest stock version CSDE to no avail. ODIN passes it successfully but when it tries to reboot it goes again into "custom binary blocked by frp lock"
Hope you might shed some light...
Click to expand...
Click to collapse
It sounds like the binary being referred to is a partition that is not touched by a standard firmware flash. Have you tried flashing the Combination/Factory firmware?
Ive seen guys mention the error but I've never seen it so I'm not sure. Sounds like it's frp locked so i would search on a way to bypass frp on your device. They've changed a bit and i haven't read up on the newer devices really yet I'm not ready to upgrade
iBowToAndroid said:
It sounds like the binary being referred to is a partition that is not touched by a standard firmware flash. Have you tried flashing the Combination/Factory firmware?
Click to expand...
Click to collapse
iBowToAndroid, thank you for replying. I tried this specific combination through AP section of ODIN:COMBINATION_FAC_FA81_N960FXXU2ARK4.rar. ODIN flashed successfully but phone is in continuous boot loop stating "Boot Image Signature Check Fail!!!. Reboot to avoid warranty bit set!!!" Combination ARK4 is based on Oreo 8.1 meanwhile device had stock Pie 9.
What do you mean exactly when you say Combination/Factory Firmware if you don't mind...
besmirgogu said:
iBowToAndroid, thank you for replying. I tried this specific combination through AP section of ODIN:COMBINATION_FAC_FA81_N960FXXU2ARK4.rar. ODIN flashed successfully but phone is in continuous boot loop stating "Boot Image Signature Check Fail!!!. Reboot to avoid warranty bit set!!!" Combination ARK4 is based on Oreo 8.1 meanwhile device had stock Pie 9.
What do you mean exactly when you say Combination/Factory Firmware if you don't mind...
Click to expand...
Click to collapse
5th digit back is your bootloader number you are flashing a older boot loader than what's on your device
TheMadScientist said:
Ive seen guys mention the error but I've never seen it so I'm not sure. Sounds like it's frp locked so i would search on a way to bypass frp on your device. They've changed a bit and i haven't read up on the newer devices really yet I'm not ready to upgrade
Click to expand...
Click to collapse
No, it's not actually FRP locked. It just means that the FRP security is enabled. If he did a factory reset from the Recovery menu, then yes, it would actually be "locked". But he has specifically stated that his device is bootlooping - so how would he do a bypass anyways...?
TheMadScientist said:
5th digit back is your bootloader number you are flashing a older boot loader than what's on your device
Click to expand...
Click to collapse
Huh? Dude, that makes no sense. First of all, he stated that it flashed successfully. And regardless, the newest bootloader for his model is 2. So it's impossible for his device to have anything newer.
besmirgogu said:
iBowToAndroid, thank you for replying. I tried this specific combination through AP section of ODIN:COMBINATION_FAC_FA81_N960FXXU2ARK4.rar. ODIN flashed successfully but phone is in continuous boot loop stating "Boot Image Signature Check Fail!!!. Reboot to avoid warranty bit set!!!" Combination ARK4 is based on Oreo 8.1 meanwhile device had stock Pie 9.
What do you mean exactly when you say Combination/Factory Firmware if you don't mind...
Click to expand...
Click to collapse
That is exactly what I meant - a Combination firmware. It sounds like whatever changes were made to put it into "Eng mode" prevent it from accepting a stock retail device flash - or at least prevent it from booting on that firmware. Sounds like you might need to look into obtaining a different device
Hello, I just came across a S8 International G950FD phone with this option on Download screen. Not sure if it is worth anything to anyone before I use it. I wonder what this mode means on a Exynos Samsung, because these already allow the bootloader to be unlocked. Anyone know? I could see the G950U utilizing this because the bootloader is locked on the US phones, but unsure what this would benefit on a International model G950FD. Maybe it just means that this S8 does not have RMM or KG State to be prenormal? Like ever maybe, even if I factory reset.
I know this is a bit late, but I have a US note 20 ultra that also says this on the download screen. I recieved the phone about 3 months before the note 20 actually came out.

FRP Locked S8 G950U

I have a Galaxy S8 that is FRP locked.
The exact model and version is: 8.0.0/R16NW/G950USQS3CRE2
From what I understand this has the v3 bootloader and Oreo, correct?
I need some help getting this phone unlocked. Anyone care to lend a hand? I can use Odin and ADB just fine, I just need to find the correct files needed for the version I have.
Also, if I can actually get the correct files., can someone outline the steps needed to do this? I've been trying to unlock this thing for about three weeks and my brain is turned to mush with all the things I've tried.
Please don't send me PMs trying to get me to contact through other means.
nookle said:
I have a Galaxy S8 that is FRP locked.
The exact model and version is: 8.0.0/R16NW/G950USQS3CRE2
From what I understand this has the v3 bootloader and Oreo, correct?
I need some help getting this phone unlocked. Anyone care to lend a hand? I can use Odin and ADB just fine, I just need to find the correct files needed for the version I have.
Also, if I can actually get the correct files., can someone outline the steps needed to do this? I've been trying to unlock this thing for about three weeks and my brain is turned to mush with all the things I've tried.
Please don't send me PMs trying to get me to contact through other means.
Click to expand...
Click to collapse
Hey. Don't worry. Frp lock is a protection for your phone this occurs when your oem lock is on. To unlock it go into developer options and then tick the oem unlock option . But for now your phone locked all you can do it flash stock firmware using odin . That's the only way . I know the data ma be precious inside the phone but it be useless until phone in not booting . So ho and flash stock firmware for your device from sammobile.com
Thats all . I hope may this helps you and inform me as soon as possible.
Stay Blessed?
Sorry for bad english.
Rana Ahmad said:
Hey. Don't worry. Frp lock is a protection for your phone this occurs when your oem lock is on. To unlock it go into developer options and then tick the oem unlock option . But for now your phone locked all you can do it flash stock firmware using odin . That's the only way . I know the data ma be precious inside the phone but it be useless until phone in not booting . So ho and flash stock firmware for your device from sammobile.com
Thats all . I hope may this helps you and inform me as soon as possible.
Stay Blessed
Sorry for bad english.
Click to expand...
Click to collapse
Yeah, flashing the firmware doesn't reset the FRP. Tried just AP, AP and BL, all five, doesn't matter. On first boot it requires the previous owner to log in. It's stored somewhere that's not touched by the flashing process somehow. Or it fails. After doing all five files on first boot it says it's installing something, gets into the 30% range, then says erasing for a bit and reboots.
Is there any way to do this?
Rana Ahmad said:
Hey. Don't worry. Frp lock is a protection for your phone this occurs when your oem lock is on. To unlock it go into developer options and then tick the oem unlock option . But for now your phone locked all you can do it flash stock firmware using odin . That's the only way . I know the data ma be precious inside the phone but it be useless until phone in not booting . So ho and flash stock firmware for your device from sammobile.com
Thats all . I hope may this helps you and inform me as soon as possible.
Stay Blessed
Sorry for bad english.
Click to expand...
Click to collapse
There is no oem unlock on a U model. Need to study up a bit before advising.
nookle said:
Yeah, flashing the firmware doesn't reset the FRP. Tried just AP, AP and BL, all five, doesn't matter. On first boot it requires the previous owner to log in. It's stored somewhere that's not touched by the flashing process somehow. Or it fails. After doing all five files on first boot it says it's installing something, gets into the 30% range, then says erasing for a bit and reboots.
Is there any way to do this?
Click to expand...
Click to collapse
flash a combination file factory reset from combo then flash legit bit 3 or higher firmware. The 30% failure after erasing is normal. 32% normally
Thanks for the reply. Is this what I need?
https://forum.xda-developers.com/ga...bination-files-bit-5-g950uu1-g955uu1-t3816112
I've never done a combination file, so not sure what's involved.
nookle said:
Thanks for the reply. Is this what I need?
https://forum.xda-developers.com/ga...bination-files-bit-5-g950uu1-g955uu1-t3816112
I've never done a combination file, so not sure what's involved.
Click to expand...
Click to collapse
Yes flash it in odin. It's a single file
TheMadScientist said:
Yes flash it in odin. It's a single file
Click to expand...
Click to collapse
If I may ask, what is a "combination file?" What exactly does it do? I'll flash it this evening after work.
nookle said:
If I may ask, what is a "combination file?" What exactly does it do? I'll flash it this evening after work.
Click to expand...
Click to collapse
Its test and diagnostic firmware released by Samsung. It is not a usable rom. You'll flash this. Factory reset from inside the settings menu. Then you can reflash official firmware. And you should be good to go unless this has been patched
TheMadScientist said:
Its test and diagnostic firmware released by Samsung. It is not a usable rom. You'll flash this. Factory reset from inside the settings menu. Then you can reflash official firmware. And you should be good to go unless this has been patched
Click to expand...
Click to collapse
So I went ahead and flashed the combination file in the first link and did a factory reset. Now when I try to flash the files I already have it fails. I'm assuming that's because I flashed a bit 5 combination firmware, and the stock files I have are not bit 5.
How do I know which firmware files I need? Do I need to do all files (BL, AP, CP, CSC) or just one? It's very hard to figure out what to do when everything I read is different.
nookle said:
So I went ahead and flashed the combination file in the first link and did a factory reset. Now when I try to flash the files I already have it fails. I'm assuming that's because I flashed a bit 5 combination firmware, and the stock files I have are not bit 5.
How do I know which firmware files I need? Do I need to do all files (BL, AP, CP, CSC) or just one? It's very hard to figure out what to do when everything I read is different.
Click to expand...
Click to collapse
Yea you need bit 5 files. Flash all 4. If you look at a firmware number. 5th dig from far end will be a 1-6 that's the current bit, anti rollback whatever you want to call it.
TheMadScientist said:
Yea you need bit 5 files. Flash all 4. If you look at a firmware number. 5th dig from far end will be a 1-6 that's the current bit, anti rollback whatever you want to call it.
Click to expand...
Click to collapse
Thank you so much for the help. I'm getting closer.
I am currently downloading a file called G950USQU5DSC1. Should be bit 5. I'm pretty sure it's for Sprint, and this phone was originally Verizon. Will this be a problem? I'd very much prefer AT&T or T-Mobile, but Verizon might be OK if I'm locked to it.
nookle said:
Thank you so much for the help. I'm getting closer.
I am currently downloading a file called G955USQU5DSC1. Should be bit 5. I'm pretty sure it's for Sprint, and this phone was originally Verizon. Will this be a problem? I'd very much prefer AT&T or T-Mobile, but Verizon might be OK if I'm locked to it.
Click to expand...
Click to collapse
verizon firmware is unlocked sim wise sprint firm probably wont work but also should setup based off of your sim card inserted.
dsc1 i believe is pie which is awesome on s8 you can change carrier also with the combination file pretty much as your doing with each personalized firmware to each carrier
TheMadScientist said:
verizon firmware is unlocked sim wise sprint firm probably wont work but also should setup based off of your sim card inserted.
dsc1 i believe is pie which is awesome on s8 you can change carrier also with the combination file pretty much as your doing with each personalized firmware to each carrier
Click to expand...
Click to collapse
I'm grabbing the file from this page: https://www.theandroidsoul.com/samsung-galaxy-s8-firmware/
How can I tell which carrier is which? I'd rather just flash the correct one off the bat. Looks like the only one on that page for the 950U that is Pie is the Sprint one. I don't have a SIM. Well, I could take the one out of my current phone temporarily if it'll help set it up correctly.
Is the process for switching carriers just flashing the CSC file? Or is it more involved.
EDIT: There is a CRK1 file that is U5 and Oreo. Pretty sure that is Verizon. Cancelled the other file and am downloading this one. Going to take a while, using my phone as it's faster than my home internet.
nookle said:
I'm grabbing the file from this page: https://www.theandroidsoul.com/samsung-galaxy-s8-firmware/
How can I tell which carrier is which? I'd rather just flash the correct one off the bat. Looks like the only one on that page for the 950U that is Pie is the Sprint one. I don't have a SIM. Well, I could take the one out of my current phone temporarily if it'll help set it up correctly.
Is the process for switching carriers just flashing the CSC file? Or is it more involved.
EDIT: There is a CRK1 file that is U5 and Oreo. Pretty sure that is Verizon. Cancelled the other file and am downloading this one. Going to take a while, using my phone as it's faster than my home internet.
Click to expand...
Click to collapse
The CsC determines sales code and carrier setup. I use sammobile or updato.com they have all firmwares needed
Boom. It worked. Typing this on the S8. Even accepted my AT&T SIM and connected to data.
Flashed an 8.0 firmware, but it seems to be getting updates. Maybe it'll update automatically to 9.
Anyway, thanks again. Free S8 is nice.
nookle said:
Boom. It worked. Typing this on the S8. Even accepted my AT&T SIM and connected to data.
Flashed an 8.0 firmware, but it seems to be getting updates. Maybe it'll update automatically to 9.
Anyway, thanks again. Free S8 is nice.
Click to expand...
Click to collapse
Good deal glad it worked
nookle said:
Thank you so much for the help. I'm getting closer.
I am currently downloading a file called G950USQU5DSC1. Should be bit 5. I'm pretty sure it's for Sprint, and this phone was originally Verizon. Will this be a problem? I'd very much prefer AT&T or T-Mobile, but Verizon might be OK if I'm locked to it.
Click to expand...
Click to collapse
that firmware is from sprint. something worth sharing is that all S8's designated for the US market are literally the exact same physically. You CAN flash whatever firmware you want for whatever carrier on a g950u. You will need a modified version of Odin to flash firmwares originally intended for a different phone tho. I had the FRP lock on my dads old S5 the other day, but i was able to get thru it with my gmail information oddly enough. Not sure why google thought that authenticating use on that device per my gmail account credentials was ok, but..... ok i guess.
Once you get the phone up and running, put a sim card from whatever provider you intend on using in the phone, if it asks you for an unlock code, then youll need to get one from the original carrier it was intended for or a third party paid site. AT&T has a sim unlock tool on their own site you can try.
Teh reason i mentioned that all the S8s intended for the USA are literally identical is because you can take a sprint S8 and use it on Verizon, AT&T, T-Mob blah blah provided youve flashed the correct firmware, which is either the U1 version or the bespoke firmware for that carrier
youdoofus said:
that firmware is from sprint. something worth sharing is that all S8's designated for the US market are literally the exact same physically. You CAN flash whatever firmware you want for whatever carrier on a g950u. You will need a modified version of Odin to flash firmwares originally intended for a different phone tho. I had the FRP lock on my dads old S5 the other day, but i was able to get thru it with my gmail information oddly enough. Not sure why google thought that authenticating use on that device per my gmail account credentials was ok, but..... ok i guess.
Once you get the phone up and running, put a sim card from whatever provider you intend on using in the phone, if it asks you for an unlock code, then youll need to get one from the original carrier it was intended for or a third party paid site. AT&T has a sim unlock tool on their own site you can try.
Teh reason i mentioned that all the S8s intended for the USA are literally identical is because you can take a sprint S8 and use it on Verizon, AT&T, T-Mob blah blah provided youve flashed the correct firmware, which is either the U1 version or the bespoke firmware for that carrier
Click to expand...
Click to collapse
Very good info. Thanks.
When I first booted the phone after flashing I had put my StraightTalk AT&T SIM in and it connected right away. It also started downloading and installing system updates, all the way through the Android 9 upgrade and the August security update. Pretty cool. The only thing I see is after a reboot or power on a notification pops saying that a non-Verizon SIM is installed. But that notification can be dismissed, and as far as I can see doesn't recur until next boot. So easily ignored. And there's Verizon specific bloatware. Maybe I'll download AT&T and T-Mobile images just in case. I've been thinking about carrier hopping, as I have pretty poor AT&T coverage in my area, since with StraightTalk I can get a Verizon SIM added to my plan and take my AT&T one off pretty easily.
I haven't really used the phone much yet, as I'm waiting on a case, but I'm not sure I'm going to like the Samsung skin. I'm used to a very stock Android experience, as I've only really used Motorola phones and my current Nokia 6.1. I just like plain vanilla Android. But I'll give it a shot. Already installed Nova Launcher and F-Droid.
followed everything on this thread, uploaded 5 level firmware files just fine, but now i get a "system software not authorized by at&t.." message.. any help?
troolplay1 said:
followed everything on this thread, uploaded 5 level firmware files just fine, but now i get a "system software not authorized by at&t.." message.. any help?
Click to expand...
Click to collapse
It's ok. Treat it as download mode and flash

Galaxy S8 bricked - Stuck in boot loop after flashing twrp

Hey there everyone,
I wanted to root my s8 (sm-950f) and when I flashed twrp my phone initially got stuck in Samsung logo. After managing to shut it down I tried to go to recovery mode to wipe everything and perform a factory reset but I can not do it. All that happens is I get to s8 screen and it reads in red on top left of the screen "Only official released binaries are allowed to be flashed" and it keeps resetting itself. I can access download mode but that's it, I can't do anything else. Currently downloading a stock firmware to try and flash it but with the free downloads it's taking its time. Any help appreciated, I really want to unbrick my phone
note: It shows FRP and OEM lock to be off in download mode, i dont even know if i'll even be able to flash a new fw. Do I just have a very expensive brick in my hands now?
nekropok said:
Hey there everyone,
I wanted to root my s8 (sm-950f) and when I flashed twrp my phone initially got stuck in Samsung logo. After managing to shut it down I tried to go to recovery mode to wipe everything and perform a factory reset but I can not do it. All that happens is I get to s8 screen and it reads in red on top left of the screen "Only official released binaries are allowed to be flashed" and it keeps resetting itself. I can access download mode but that's it, I can't do anything else. Currently downloading a stock firmware to try and flash it but with the free downloads it's taking its time. Any help appreciated, I really want to unbrick my phone
Click to expand...
Click to collapse
This must be a international S8... Did you activate oem unlock in developer settings before flashing twrp
([emoji3590]09-09-18[emoji3590])
I'm not sure if it's international, it's most likely a Turkish version.
And yeah to your question
nekropok said:
I'm not sure if it's international, it's most likely a Turkish version.
And yeah to your question
Click to expand...
Click to collapse
But you know for a fact that there's a twrp version for your device.... Not good to do these expensive phones like that without officially having all the facts
([emoji3590]09-09-18[emoji3590])
Well it's too late for that now, I need actual solutions. I also tried smart switch - it doesn't recognize the phone
nekropok said:
Well it's too late for that now, I need actual solutions. I also tried smart switch - it doesn't recognize the phone
Click to expand...
Click to collapse
On the xda thread for your device there aren't no stock roms uploaded to Android host for fast download so you can flash in Odin and start the process of twrp again or just leave it alone you have a S8 it's good money
([emoji3590]09-09-18[emoji3590])
WHEW. Flashing a stock firmware seems to have fixed the issue. Mods can lock the thread.
nekropok said:
WHEW. Flashing a stock firmware seems to have fixed the issue. Mods can lock the thread.
Click to expand...
Click to collapse
You going to give up on twrp
([emoji3590]09-09-18[emoji3590])
I do want to root, but I don't want to approach it without knowing all my facts, do you have any suggestions for guides for Android 9.0?
nekropok said:
I do want to root, but I don't want to approach it without knowing all my facts, do you have any suggestions for guides for Android 9.0?
Click to expand...
Click to collapse
Just look in your device forum everything Is there however your device is a international cause it ends in with the F so twrp does work for your device..... You just need to find the specific one for your model once you have twrp you can install a android 9 custom rom
([emoji3590]09-09-18[emoji3590])
I had same issue as you and was pointed towards this thread may be of some use to you?
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Problem on my S8
PoochyX said:
This must be a international S8... Did you activate oem unlock in developer settings before flashing twrp
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Sorry but I have a serious problem. I have activated oem and debug usb on developer option, but I can't install TWRP. I have tried with odin, prince cosmy odin, odin patched but FAIL everywhere, please help me, I just want twrp and i want to install a custom rom. thanks in advance everyone. If is a problem answer me here, you can send me a pvt message. I tried it from 3 days with the same FAILS :_(
I had this problem too a year ago but wasn't able to reflash the official firmware, but when I went to Samsung they fixed it for free even though Knox was already tripped
FabiusMod said:
Sorry but I have a serious problem. I have activated oem and debug usb on developer option, but I can't install TWRP. I have tried with odin, prince cosmy odin, odin patched but FAIL everywhere, please help me, I just want twrp and i want to install a custom rom. thanks in advance everyone. If is a problem answer me here, you can send me a pvt message. I tried it from 3 days with the same FAILS :_(
Click to expand...
Click to collapse
are you able to flash the stock firmware on it and get it to boot without TWRP installed?
I am with a stock rom now, The device works fine.

Categories

Resources