Hello,
Just hard-bricked my used PH-1 phone trying to flash a version of PIE from Essential's web site.
I used the USB cable that came with the phone, and am now reading that this can brick the phone.
It is completely unresponsive and won't turn on. My PC recognizes it as Qualcomm HS-USB QDLoader 9008
I've seen some older posts related to this issue, but none where it was fixed. Does anyone know of a way to fix the phone?
Thanks!
lesterf said:
Hello,
Just hard-bricked my used PH-1 phone trying to flash a version of PIE from Essential's web site.
I used the USB cable that came with the phone, and am now reading that this can brick the phone.
It is completely unresponsive and won't turn on. My PC recognizes it as Qualcomm HS-USB QDLoader 9008
I've seen some older posts related to this issue, but none where it was fixed. Does anyone know of a way to fix the phone?
Thanks!
Click to expand...
Click to collapse
Nope...
The only successful unbricking was a motherboard transplant... Which requires another device... And some serious know how
any help ? i have same issue
rakan10000 said:
any help ? i have same issue
Click to expand...
Click to collapse
The last post from rignfool sums it up...
Related
Hi,
My phone got bricked while installing and update. The phone i hard bricked it shows no signs of life and does not go to Download or recovery mode. Not by button combination or USB Jig.
When I connect the phone to the laptop it shows qualcomm hs-usb qdloader 9008. Is there any way to rescue the phone and debrick it?
Thanks :crying:
Come on people there should be a solution to this crap
I just bought LG V20 US996 few day ago, when I use LGUP to restore firmware, it show model of my device H918 (actually is US996) and then I make a big mistake when try to restore with H918 firmware and now my phone can not turn on, can't do anything, when I connect it to PC, in device manager show "qualcomm hs-usb qdloader 9008" COM10, what should can do now ? so bad for me.
tiachop22 said:
I just bought LG V20 US996 few day ago, when I use LGUP to restore firmware, it show model of my device H918 (actually is US996) and then I make a big mistake when try to restore with H918 firmware and now my phone can not turn on, can't do anything, when I connect it to PC, in device manager show "qualcomm hs-usb qdloader 9008" COM10, what should can do now ? so bad for me.
Click to expand...
Click to collapse
i have this same issue. unfortunately the questions and answers section of xda tend to be mostly tumbleweeds.
The only way to fix the 9008 error is to open up the phone and short two pins on the Qualcomm chip to force it into download mode. It is fixable if you don't mind opening your phone...
runningnak3d said:
The only way to fix the 9008 error is to open up the phone and short two pins on the Qualcomm chip to force it into download mode. It is fixable if you don't mind opening your phone...
Click to expand...
Click to collapse
Do you have two pín into download mode ?
Help me! My phone is 9008
When I made that post back in June, I didn't realize that was no longer possible on the SD820.
The only way to fix a 9008 brick on the V20 is either a very expensive piece of hardware, or ship it off to LG.
-- Brian
Just assuming my phone got an update last night and decided to brick itself. From my side, restarts won't work but I got a USB to recognize Qualcomm HS-USB QDLoader 9008 (COM5). I've tried the software (here) but it doesn't seem to run on the phone, what would be my next step?
Thanks!
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
abc617 said:
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
Click to expand...
Click to collapse
So if it's showing as qc 9008 mode than it's a good sign.. it means it's going to edl mode.
What you need to do is find a qfil flashable firmware (just google) and flash it on your device through qfil flash software.
Hi. My Nexus 6P is not turning on and when i connect it, gives me Qualcomm hs-usb qdloader 9008.
How can i fix this?
sufy1000 said:
Hi. My Nexus 6P is not turning on and when i connect it, gives me Qualcomm hs-usb qdloader 9008.
How can i fix this?
Click to expand...
Click to collapse
Dead motherboard maybe
That is EDL, Emergency Down Load mode. Its a kind of hardware fastboot mode on Qualcomm chips. you can use special flash software to flash your phone back to factory condition. It may not be dead. It may be fine.
Cursedmale said:
That is EDL, Emergency Down Load mode. Its a kind of hardware fastboot mode on Qualcomm chips. you can use special flash software to flash your phone back to factory condition. It may not be dead. It may be fine.
Click to expand...
Click to collapse
How? can you please detail us? My mobile too down!