Database Users

UltraOcta-T8 upgrade to Android 8.1

Hi all
I have a 9" UltraOcta-T8 (I think it is the AllWinner) and it is running Android 7.1.2
Is there an upgrade path to Oreo at all.
Here is a pic of the About screen showing MCU and System version ( for some reason I cannot upload an image)
MCU version: 5.3. 19-63-84-C06101-170705
System Version: V9.2.2_20171013. 154052_TW2-FD
Thanks
Lance

I was hoping you had a solution too, I love the head unit but I think it could be a better experience with 8.0 on it, it's been over a year without a reply on this thread.

dj_hallucn8 said:
I was hoping you had a solution too, I love the head unit but I think it could be a better experience with 8.0 on it, it's been over a year without a reply on this thread.
Click to expand...
Click to collapse
Yes, there is an upgrade path using Phoenix Suite. I upgraded from 7.1 to 8.1 around 2 weeks ago and the head unit now feels snappier and it hasn't crashed yet when using various sat nav apps which it used to sometimes on 7.1. Boot time is slightly faster and I've found it connects via bluetooth to my phone automatically every time I get in the car. Under 7.1 it was quite sporadic.
There is a post on the main T8 Allwinner thread which you will have to look for. You'll need a laptop, Phoenix Suit, 8.1 ROM which is in the post (I've now flashed the JP variant of 8.1 which is stable), Male to Male USB cable to connect laptop to head unit.
The instructions in said post are a little hard to understand, but it only took me about 15 minutes after I'd downloaded the software and ROMs.

Goof757 said:
Yes, there is an upgrade path using Phoenix Suite. I upgraded from 7.1 to 8.1 around 2 weeks ago and the head unit now feels snappier and it hasn't crashed yet when using various sat nav apps which it used to sometimes on 7.1. Boot time is slightly faster and I've found it connects via bluetooth to my phone automatically every time I get in the car. Under 7.1 it was quite sporadic.
There is a post on the main T8 Allwinner thread which you will have to look for. You'll need a laptop, Phoenix Suit, 8.1 ROM which is in the post (I've now flashed the JP variant of 8.1 which is stable), Male to Male USB cable to connect laptop to head unit.
The instructions in said post are a little hard to understand, but it only took me about 15 minutes after I'd downloaded the software and ROMs.
Click to expand...
Click to collapse
Thank you, this got me pointed in the correct direction, only thing I'm worried about is losing BT capability since I read that happens a lot.

some high-tech may support upgrade
most devices can't upgrade from 7 to 8 version. It depends on whether your head unit support upgrade. need to reach out to seller.

dj_hallucn8 said:
Thank you, this got me pointed in the correct direction, only thing I'm worried about is losing BT capability since I read that happens a lot.
Click to expand...
Click to collapse
That was one of my concerns also, I had no issues though. Just make sure you take note of the config in the extra settings. Once you've flashed your final ROM, check the settings are the same and reboot the head unit 3 or 4 times (not sure why, but seen it said a few times).
---------- Post added at 07:13 AM ---------- Previous post was at 07:07 AM ----------
Arkright said:
most devices can't upgrade from 7 to 8 version. It depends on whether your head unit support upgrade. need to reach out to seller.
Click to expand...
Click to collapse
You can upgrade from 7.1 to 81 on the UltraOcta T8 AllWinner devices. It's just a bit of pain as you need to use laptop etc... but once you have everything together it's quick and easy.
The only thing I'm not sure on is the downgrade path (8.1 to 7.1) should you need it. Thankfully I've found 8.1 (v9.3.1_20181109.180710_JP3-FD) to be much more stable than 7.1 (9.2 JP1-FD).

Which thread did you say the instructions were in?
I can't seem to find the thread when i search for allwinner t8 update
dj_hallucn8 said:
Thank you, this got me pointed in the correct direction, only thing I'm worried about is losing BT capability since I read that happens a lot.
Click to expand...
Click to collapse

Can I get some help identifying which image I need ot be using for this? Also is this the latest version?
Note: why the hell do they make this so hard to update?

[email protected] said:
I can't seem to find the thread when i search for allwinner t8 update
Click to expand...
Click to collapse
thegreaterswan said:
Can I get some help identifying which image I need ot be using for this? Also is this the latest version?
Click to expand...
Click to collapse
[SOLVED] How to update Android version (6, 7, 8, 9) on HU with Allwinner T8 (firmware v9.1.1, v9.2.2, v9.3.1, v9.4.1)
How to update Android version (6, 7, 8, 9) on HU with Allwinner T8 (firmware v9.1.1, v9.2.2, v9.3.1, v9.4.1) Attention! You can update Android version only from PC! [/SIZE][/B] [/SPOILER][/SPOILER][/SIZE][/B] On the Car settings screen, select...
forum.xda-developers.com

Update JOYING PX5 android 8.1 to android 9

Hello everyone
I have since yesterday a Joying JY-UO135N4-OBD, MCU number: TP6735D 0.43 under android 8.1 that I want to upgrade to android 9 because my OnePlus 6 is under 9 and can not connect USB on the Joying.
Is there an update?
Thank you for your answers.

All Techniques said:
Hello everyone
I have since yesterday a Joying JY-UO135N4-OBD, MCU number: TP6735D 0.43 under android 8.1 that I want to upgrade to android 9 because my OnePlus 6 is under 9 and can not connect USB on the Joying.
Is there an update?
Thank you for your answers.
Click to expand...
Click to collapse
No there is no update and I'm for 99,5% sure there will not come an update anymore now that the new Intels are coming in and the PX5s are slowly phased out.

Eunavi claims they will have a 9.0 firmware for their PX5 units this month. Maybe others will update as well.

surfer63 said:
No there is no update and I'm for 99,5% sure there will not come an update anymore now that the new Intels are coming in and the PX5s are slowly phased out.
Click to expand...
Click to collapse
I'm a little disgusted to learn that, I should have better information before.
Is it possible to make my Joying 8.1 compatible with my OP6 Pie in another way?
In bluetooth everything works very well but in usb (for android auto and mirror function) my OP6 sees the joying but the joying does not connect to the OP6.
Thank you for your skills

OP6 Android 9.0 with Z-Link is working on the new intel joying units....

All Techniques said:
I'm a little disgusted to learn that, I should have better information before.
Is it possible to make my Joying 8.1 compatible with my OP6 Pie in another way?
In bluetooth everything works very well but in usb (for android auto and mirror function) my OP6 sees the joying but the joying does not connect to the OP6.
Thank you for your skills
Click to expand...
Click to collapse
I believe you can attempt using the trial version of Headunit Reloaded Android Auto and if this works out. You can try out using the full version.
TRIAL
XDA-Attachment Direct-URL : https://forum.xda-developers.com/attachment.php?attachmentid=4599136&d=1537265089
G-Play URL: https://play.google.com/store/apps/details?id=gb.xxy.trial
FULL
XDA-Labs URL: https://labs.xda-developers.com/store/app/gb.xxy.hr
G-Play URL: https://play.google.com/store/apps/details?id=gb.xxy.hr&hl=en_US
I can confirm this to work with Pixel 2 running Android 9.0 using both wired and wireless.
It's not installing Android 9.0 directly onto the head unit but it will mirror any source android phone as long as it's 4.1+.

chriscolon88 said:
I believe you can attempt using the trial version of Headunit Reloaded Android Auto and if this works out. You can try out using the full version.
I can confirm this to work with Pixel 2 running Android 9.0 using both wired and wireless.
It's not installing Android 9.0 directly onto the head unit but it will mirror any source android phone as long as it's 4.1+.
Click to expand...
Click to collapse
The OP asks whether he can upgrade his PX5 to Android 9. Not whether he can use an Android 9 phone/device with his unit.
That's a big difference and mirroring your phone to your head unit might be enough, but it is always a big functionality limitation when comparing it with the full head unit functionality.
For me the only concern with older Android versions it the lack of support when it comes to security patches by those Chinese suppliers. Joying (and all the others) simply stop supplying security updates even though the Android 8.0 version on the PX5 is still fully supported.
Using Android auto or headunit reloaded does not change that. It might even make it worse (and especially with z-link)

surfer63 said:
The OP asks whether he can upgrade his PX5 to Android 9. Not whether he can use an Android 9 phone/device with his unit.
That's a big difference and mirroring your phone to your head unit might be enough, but it is always a big functionality limitation when comparing it with the full head unit functionality.
For me the only concern with older Android versions it the lack of support when it comes to security patches by those Chinese suppliers. Joying (and all the others) simply stop supplying security updates even though the Android 8.0 version on the PX5 is still fully supported.
Using Android auto or headunit reloaded does not change that. It might even make it worse (and especially with z-link)
Click to expand...
Click to collapse
I did specifically reply to OP's message, to be more clear:
Is it possible to make my Joying 8.1 compatible with my OP6 Pie in another way?
Click to expand...
Click to collapse
But seeing that the OP may be staying with his current PX5 I took the liberty of suggesting an alternative to Z-link. Seeing as I have hit the same snag as him with my PX5 and Pixel 2 running Android 9.0. So as a reiteration to the previously mentioned:
Is it possible to make my Joying 8.1 compatible with my OP6 Pie in another way?
Click to expand...
Click to collapse
May I also point out I did mention this specifically at the end of my reply:
It's not installing Android 9.0 directly onto the head unit but it will mirror any source android phone as long as it's 4.1+.
Click to expand...
Click to collapse
Do you have any available solution to OP's last question?

chriscolon88 said:
I did specifically reply to OP's message, to be more clear:
Do you have any available solution to OP's last question?
Click to expand...
Click to collapse
You are completely right. I had overseen his second question. sorry.
Headunit reloaded should/might work.
Z-link only works with phone versions up to 8.1 with the PX-5.
The new 9853i (8.1) does work with Android 9 phones. It might be worth trying to install that z-link version onto the PX5 to see whether that works.

surfer63 said:
You are completely right. I had overseen his second question. sorry.
Headunit reloaded should/might work.
Z-link only works with phone versions up to 8.1 with the PX-5.
The new 9853i (8.1) does work with Android 9 phones. It might be worth trying to install that z-link version onto the PX5 to see whether that works.
Click to expand...
Click to collapse
I thank you all for your answers.
I made a cross on a hypothetical update of the PX5 but if an application can replace Z-link to run my OP6 pie it would be great.
Or a custum ROM ....

All Techniques said:
I thank you all for your answers.
I made a cross on a hypothetical update of the PX5 but if an application can replace Z-link to run my OP6 pie it would be great.
Or a custum ROM ....
Click to expand...
Click to collapse
I have an OnePlus 6T and I have the 10.1" octacore 4/64 GB px5 8.1 joying unit and I contacted them about it. They say they are working on an update to fix it. So... We shall see, not holding my breath. I plugged in my backup Moto E4 and the works with z link.
What I'm trying to figure out is what update my unit needs since they have their Intel altimont update on their site and I'm not sure if that's compatible.
Edit: ok so I see that I have a QD unit, I reached out to joying to see if there's any recent updates

Hi, is it possible to update a firmware/ROM from android 8.0 to 8.1 using Joying web updates? My HU is Xtrons MCU KEQ, but is essentially a Joying hardware with px5 4/32g.
Thanks in advance

polgoz said:
Hi, is it possible to update a firmware/ROM from android 8.0 to 8.1 using Joying web updates? My HU is Xtrons MCU KEQ, but is essentially a Joying hardware with px5 4/32g.
Thanks in advance
Click to expand...
Click to collapse
No.
The PX5 8.0 firmware is an ARM64 android. The intel airmont 8.1 firmware is an x86_64 android.
They are completely incompatible. And then there is the differences in other hardware requiring other drivers.

surfer63 said:
No.
The PX5 8.0 firmware is an ARM64 android. The intel airmont 8.1 firmware is an x86_64 android.
They are completely incompatible. And then there is the differences in other hardware requiring other drivers.
Click to expand...
Click to collapse
Ok, thanks.. I suspect that.. ja
Im lookin to replace my com.syu.amp from my actual 8.0 system. How can I get a new/different one? I saw that Joying is showing a new parametric EQ in the 8.1 set. And the HU dont have a DPS hardware. So.. Is there a way to take some Archives from android 8.1 to use it on 8.0?
Thanks in advance Surfer!

polgoz said:
Ok, thanks.. I suspect that.. ja
Im lookin to replace my com.syu.amp from my actual 8.0 system. How can I get a new/different one? I saw that Joying is showing a new parametric EQ in the 8.1 set. And the HU dont have a DPS hardware. So.. Is there a way to take some Archives from android 8.1 to use it on 8.0?
Thanks in advance Surfer!
Click to expand...
Click to collapse
I don't think so.
And the com.syu.eq is the "visual" equalizer. I'm afraid the difference in hardware is too big to make it work. And I also think that other libraries and drivers are required.

surfer63 said:
I don't think so.
And the com.syu.eq is the "visual" equalizer. I'm afraid the difference in hardware is too big to make it work. And I also think that other libraries and drivers are required.
Click to expand...
Click to collapse
My problem is that EQ is not doing that would be at all. 7 bands and and every one of this acts as HPF. Its imposible get a good spot.
On system/priv-app/ there are 2 folders related to audio, one is the 180000000_com.syu.amp that inside has an .apk called AMP.
And de second folder is com.syu.eq that has the Eq executable.
Maybe trying with the last Joying web firmware to px5 from november 2018? What do you think?
Thanks again for your help.

polgoz said:
My problem is that EQ is not doing that would be at all. 7 bands and and every one of this acts as HPF. Its imposible get a good spot.
On system/priv-app/ there are 2 folders related to audio, one is the 180000000_com.syu.amp that inside has an .apk called AMP.
And de second folder is com.syu.eq that has the Eq executable.
Maybe trying with the last Joying web firmware to px5 from november 2018? What do you think?
Click to expand...
Click to collapse
Sorry. I really don't know. I already mentioned my doubts and have no further experiene with it, and know nobody who has.

Would it be possible to see if the Z-Link apk (from new Intel Joying) can work on the 8.0 (PX5). If someone can extract the apk and share it from the device itself? I've tried downloading the firmware, and extract the system.img but I can't go any further than that for now. I need to figure out how to extract ext4 images on a mac.

Help identifying head unit FUNROVER

Dear all,
i have this Funrover head unit, please your help if it possible yo update firmware, actually i have android 8.0 but its very slow and the mirrorlink or Easyconnect wont work on usb type C...
i attached details of my head unit
thank you all, any help please

just need to know what firmware can install, since the one that came with the HU doesnt work easyconnect (android 8.0.)

dachepo said:
just need to know what firmware can install, since the one that came with the HU doesnt work easyconnect (android 8.0.)
Click to expand...
Click to collapse
You have a Sofia unit. That unit is running Android 6.0.1. That does not support phones with Android 8.x. There is no firmware that will help you.
You should better take a look at HUR: Head Unit Reloaded. It is made by an XDA developer.

surfer63 said:
You have a Sofia unit. That unit is running Android 6.0.1. That does not support phones with Android 8.x. There is no firmware that will help you.
You should better take a look at HUR: Head Unit Reloaded. It is made by an XDA developer.
Click to expand...
Click to collapse
but in the info says android 8.0
thats not real?

dachepo said:
but in the info says android 8.0
thats not real?
Click to expand...
Click to collapse
What info? From the supplier or the website or on your unit?
I don't see that from your images.
Also: A Sofia running on android 8.0? That would be the first that I know of (but I don't know everything , not by far )
Your 2nd image shows a Bluetooth version of 6.0.1.-23. That version is not correct, but is shows Android 6.0.1 with some kernel version.
Anyway: Even if your Sofia is running Android 8, there is no (custom) firmware available that will allow it to pair with an android phone on 8.x or newer.

Thank you for the explanation surfer.
That means i cannot install any of the firmware on this forum?

dachepo said:
Thank you for the explanation surfer.
That means i cannot install any of the firmware on this forum?
Click to expand...
Click to collapse
Probably not. Maybe you can install the gtxaspec custom rom, but only if your funrover is 100% identical with a Joying Sofia (which is possible).
Normally there is a fyt.prop where the company is defined. For Joying that id is 43. So even if you use that custom rom, you first need to change the id in the custom ROM to the Funrover id, otherwise your MCU will give problems.
And even in that case: your android phone 8 will still not be supported in Android auto/Easyconnected.
So my advice: Don't even try that route as you will not have any support.
Go for HUR like I advised in my first post.

TS9 (Spreadtrum SC9853I) 4/64G Android 9 - Discussion thread

Hi !
I've got an new android 9 headunit "tesla-style" for my opel astra j now and want to get some more informations about device and firmware/mcu updates.
Are there any known update sources?
Bought it here: TS-4G 4G64G add DVR
system informations:
Processor type: Octa-sp9853i
Android-Version: 9
MCU-Version: Ts9V.4.3-156-80-A46181-190731
CAN-Version: V2.32.000BYPTDA
System version: V11.1.1_20191231.133025_TW-V1-X

Just one update about system informations with CPU-Z, please look at the attached pictures.
Thanks!

102649259 said:
V11.1.2_20200516.112414_TW-V1-X.rar
Click to expand...
Click to collapse
Thank you. Any source for downloading?

102649259 said:
https://pan.baidu.com/s/1QUTnhcI71H36IzfxIdKs4A
code：oepo
Click to expand...
Click to collapse
Can you upload this to google drive maybe?
Thanks! :good:

102649259 said:
I uploaded it to the Russian disk
https://yadi.sk/d/R7pWxq0EL43S6Q
Click to expand...
Click to collapse
Thank you so much!

Hello all,
Can anyone explain the file structure significance? I believe the 427c4ecc-c1fc-11e8-b558-cb289b80f7d2.0 - 0.4 files make up the system.img. What is 43864958-c1fc-11e8-b9ce-0701f06faf8a?
PS: It seems there is problem with this file. system.img will not extract, software will load but not boot.
https://yadi.sk/d/R7pWxq0EL43S6Q

andason said:
Hello all,
Can anyone explain the file structure significance? I believe the 427c4ecc-c1fc-11e8-b558-cb289b80f7d2.0 - 0.4 files make up the system.img. What is 43864958-c1fc-11e8-b9ce-0701f06faf8a?
PS: It seems there is problem with this file. system.img will not extract, software will load but not boot.
https://yadi.sk/d/R7pWxq0EL43S6Q
Click to expand...
Click to collapse
I didn't test it yet. But I'm interested in where to get these custom roms for this device. And mcu update files maybe.

Any updates about device manufacturer?
I've checked out this thread on 4pda.ru: Head devices Topway TS9 (Spreadtrum SC9853I) Android 8.1 - Discussion | MCU Version Ts9.4.3-xxx-xx-xxxxx-xxxxxx Series
But they are talking about android 8.1 TS9-devices and also still don't gave me useful information.
Is there anyone with same hardware?

V11.1.1_20200608.150248_TW-V1-X-GT
Anyone want to try it are welcome:
https://drive.google.com/file/d/16MrlZMzmEhBiY2b_Dus3dbhQz_VyFyyC/view?usp=sharing
Looks like new one arrived. Will try tomorrow. Contact me here if questions:
https://www.drive2.ru/l/550667584979075098/

andason said:
Hello all,
Can anyone explain the file structure significance? I believe the 427c4ecc-c1fc-11e8-b558-cb289b80f7d2.0 - 0.4 files make up the system.img. What is 43864958-c1fc-11e8-b9ce-0701f06faf8a?
PS: It seems there is problem with this file. system.img will not extract, software will load but not boot.
https://yadi.sk/d/R7pWxq0EL43S6Q
Click to expand...
Click to collapse
Same here. Software installed successfully, but will not boot. It hangs on the car logo screen. I had to flash back original software. How to solve this problem?

banstalker said:
V11.1.1_20200608.150248_TW-V1-X-GT
Anyone want to try it are welcome:
https://drive.google.com/file/d/16MrlZMzmEhBiY2b_Dus3dbhQz_VyFyyC/view?usp=sharing
Looks like new one arrived. Will try tomorrow. Contact me here if questions:
https://www.drive2.ru/l/550667584979075098/
Click to expand...
Click to collapse
Hi ! Is this firmware Android 8.1? I'm using Android 9.
Can you leave feedback after upgrading please?
Is this official rom or custom firmware? I would be glad to hear from you. :fingers-crossed:

droidmanuser said:
Hi ! Is this firmware Android 8.1? I'm using Android 9.
Can you leave feedback after upgrading please?
Is this official rom or custom firmware? I would be glad to hear from you. :fingers-crossed:
Click to expand...
Click to collapse
Good to go. Looks like original firmware, all stock, installed today with no issues.
My multimedia is Preling Tesla style for Opel one. 4/64 ts9. Dont think it is kind difference between firmwares, once disassembled a lot of them, this one by tw.
As well used magisk root recovery, all is working.
Asked seller for new firmware for one hundred times and found it myself on internet by mistake =). BTW all this is not 9 android like it called in info it is 8.1. Also get info regarding upcoming android 10. Will see. Personally waiting for RedMode firmware because of buttons reassignment possibility.
PS. Is it any good rom maker or hard experienced app modifier with this kind of multimedia?

banstalker said:
Good to go. Looks like original firmware, all stock, installed today with no issues.
My multimedia is Preling Tesla style for Opel one. 4/64 ts9. Dont think it is kind difference between firmwares, once disassembled a lot of them, this one by tw.
As well used magisk root recovery, all is working.
Click to expand...
Click to collapse
Nice. My multimedia is same as yours and for Opel, too. Do you discovered any differences between the TW and GT firmware?
banstalker said:
Asked seller for new firmware for one hundred times and found it myself on internet by mistake =). BTW all this is not 9 android like it called in info it is 8.1. Also get info regarding upcoming android 10. Will see. Personally waiting for RedMode firmware because of buttons reassignment possibility.
Click to expand...
Click to collapse
Yes, I asked the seller for new firmware and mcu updates, too. More often. They answered only, no new firmware at this time. I could not believe that because mine was released on december 2019.
So, this (new) firmware you have is android 8.1, isn't it?

banstalker said:
PS. Is it any good rom maker or hard experienced app modifier with this kind of multimedia?
Click to expand...
Click to collapse
Sorry, but I don't know. My experiences in app development and disassembling are a little bit outdated.
P.S.: Do you know an working autostart app for this multimedia? I have tried out many apps, but all of them are not working.

droidmanuser said:
Nice. My multimedia is same as yours and for Opel, too. Do you discovered any differences between the TW and GT firmware?
Yes, I asked the seller for new firmware and mcu updates, too. More often. They answered only, no new firmware at this time. I could not believe that because mine was released on december 2019.
So, this (new) firmware you have is android 8.1, isn't it?
Click to expand...
Click to collapse
A couple of small improvements. I think this is the last available ROM on the market now. Have root and launcher with opel sedan logo on desktop implemented.
Have one annoying bug with original Bluetooth application. It is double skipping forward backward ie one press two track forward. Think that problem is partially hardware issued.
BTW all the firmwares for this multimedia is 8.1.
Hope somewhen redmod for ts9 tesla will be released once i need key relearn feature.

banstalker said:
A couple of small improvements. I think this is the last available ROM on the market now. Have root and launcher with opel sedan logo on desktop implemented.
Have one annoying bug with original Bluetooth application. It is double skipping forward backward ie one press two track forward. Think that problem is partially hardware issued.
BTW all the firmwares for this multimedia is 8.1.
Hope somewhen redmod for ts9 tesla will be released once i need key relearn feature.
Click to expand...
Click to collapse
Thanks for your reply.
So, now I'm pretty unsure to keep my stock android 9 and waiting for upgrades or downgrade to android 8.1
Do you know if root is working on android 9?
What will you do in my case? What I want is root and future updates, of course.

Noob help on updating Android Firmware

Hey All, I have a
32GB A-Sure Android 9.0 VW Golf MK5 MK6 9" Car Head Unit Stereo Sat Nav GPS DAB+
Purchased a few years back, the interface is starting to become sluggish, so was looking to update the firmware.
Is it possible to update to Android 10 on all units. If so, could you point me in the right direction of a website to download the file please.
Thanks in advance!

Daiboy1980 said:
Hey All, I have a
32GB A-Sure Android 9.0 VW Golf MK5 MK6 9" Car Head Unit Stereo Sat Nav GPS DAB+
Purchased a few years back, the interface is starting to become sluggish, so was looking to update the firmware.
Is it possible to update to Android 10 on all units. If so, could you point me in the right direction of a website to download the file please.
Thanks in advance!
Click to expand...
Click to collapse
Updating to yet another stock firmware will not do any improvements on your head unit. There might be custom firmware for your head unit but you need to post a screenshot of your System Info. It will contain your MCU.

ExtremeMOD said:
Updating to yet another stock firmware will not do any improvements on your head unit. There might be custom firmware for your head unit but you need to post a screenshot of your System Info. It will contain your MCU.
Click to expand...
Click to collapse
MCU Version
MTCE_LM_V3.16_1
Model PX30(1024x600)

Daiboy1980 said:
MCU Version
MTCE_LM_V3.16_1
Model PX30(1024x600)
Click to expand...
Click to collapse
Excellent, install Malaysk ROM and never look back

ExtremeMOD said:
Excellent, install Malaysk ROM and never look back
Click to expand...
Click to collapse
Perfec thanks. Will I have to install Andoid 10 first? Currentyl on 9

ExtremeMOD said:
Excellent, install Malaysk ROM and never look back
Click to expand...
Click to collapse
Will Android 10 work on BT SD-BC6?

Daiboy1980 said:
Perfec thanks. Will I have to install Andoid 10 first? Currentyl on 9
Click to expand...
Click to collapse
You can but you don't need to. Malaysk can run on 9 as well.

ExtremeMOD said:
You can but you don't need to. Malaysk can run on 9 as well.
Click to expand...
Click to collapse
Great, thanks for that. I assume an MCU update to the most recent would be best practice before installing?

Daiboy1980 said:
Great, thanks for that. I assume an MCU update to the most recent would be best practice before installing?
Click to expand...
Click to collapse
You could yes.

Is there a preferred source of the file?

Daiboy1980 said:
Is there a preferred source of the file?
Click to expand...
Click to collapse
Right here on XDA. Search for the official Malaysk thread

Hi @ExtremeMOD I'll would like your help and knowledge, I bought a year ago a Chinese android head unit, specifically a yt9216b in Aliexpress
(https://aliexpress.ru/item/10000205...4W7zQi_w9naFPgRWKuFXS_Vu6YMEwP6xoCxIgQAvD_BwE)
months ago I changed the default launcher to Car Launcher Free by Apps Lab Studio
(https://play.google.com/store/apps/details?id=com.autolauncher.motorcar.free&hl=es)
and a month ago suddenly the touchscreen has no response and I cant do anything at all
I haven't upgraded or modified any of the firmware or anything like that cause I don´t know how to do it, as I wrote I only change launcher cause it was an easy thing to do and for esthetical reasons.
I´ve watched some of your videos and the only thing I can share to you about de head unit is the next image and the video of the failure or malfunction, cause the touchscreen isn´t working I can´t go to see the kernel version.
thanks for reading and hopefully you can advice of what and how to do it
happy holidays!!

rmortiz said:
Hi @ExtremeMOD I'll would like your help and knowledge, I bought a year ago a Chinese android head unit, specifically a yt9216b in Aliexpress
(https://aliexpress.ru/item/10000205...4W7zQi_w9naFPgRWKuFXS_Vu6YMEwP6xoCxIgQAvD_BwE)
months ago I changed the default launcher to Car Launcher Free by Apps Lab Studio
(https://play.google.com/store/apps/details?id=com.autolauncher.motorcar.free&hl=es)
and a month ago suddenly the touchscreen has no response and I cant do anything at all
I haven't upgraded or modified any of the firmware or anything like that cause I don´t know how to do it, as I wrote I only change launcher cause it was an easy thing to do and for esthetical reasons.
I´ve watched some of your videos and the only thing I can share to you about de head unit is the next image and the video of the failure or malfunction, cause the touchscreen isn´t working I can´t go to see the kernel version.
thanks for reading and hopefully you can advice of what and how to do it
happy holidays!!
Click to expand...
Click to collapse
Check the flat cable in the middle, inside the unit. Sounds like it's loose. Or insert it the other way.