stuck at eRecovery after upgrade - Huawei Mate 9 Pro Questions & Answers

Hello,
my phone (LON-L29 C432) is stuck at eRecovery after an upgrade. It was running EMUI8 and I believe the upgrade was to EMUI9.
It is locked and was never unlocked and it never had a custom recovery installed.
I am able to run recovery via wifi and it says it succeeded, but then it boots with a message saying "there was a serious problem booting".
I want to recover my photos, so the option to wipe/reset is not an option for me.
Is there any way to boot it somehow to get at least adb working?
Note: I am able to boot it in fastboot, but that doesn't help much. I also tried to MultiTool 8 but it didn't work for me.

Your best bet is to find a certified Huawei repair shop.

I did speak to them already and they only offered factory reset, which I can do by myself...

Related

Honor 8 Lite PRA-AL00 heavy brick, need help

I had EliteTWRP 3.2.1-0 and restored the official rom from twrp recovery but it was stuck when trying to first-time configure the phone(it wouldn't get past the wifi setup). So I went into twrp to try and format everything and try to flash a different ROM and I faced another problem. Internal storage couldn't be mounted. I wanted to fix that by flashing the twrp 3.1.1 because that worked for me before. I got in the fastboot mode but it said that the phone is locked. That was strange to me so I tried unlocking the bootloader with "fastboot oem unlock [my unlock code]". The prompt came on screen asking me if i wanted to unlock boot loader and factory reset and I said yes. Then my phone restarted and is stuck on "Your device has been unlocked and cant be trusted. ...mod=restore page... Your device is booting now...". From that point it's stuck on that screen and I can't get into the recovery or fastboot mode. I tried the dload method(holding volume up volume down and power button) but that did nothing.
Please help.

I need help, soft bricked phone...

@letschky, or any other what to do:
I got old friends phone, perfectly health with old b332 rom (android 7).
It was rooted, twrp, @letschky rom.
I wanted just to back to stock.
So entered in twrp and wiped all. Of course I know I now not have rom. I hoped to do erecovery.
Entered erecovery and it said: 'getting package info failed'.
Hisuite also can't recognize its rom.
So how to repair?
Twrp is operable.
Bootloader level also works, I was there. Fastboot can work.
Thanks in advance

What am I doing wrong with flashing?

Hi folks. I have tried to upgrade the android release of a rooted P9 Lite phone.
(It had the 50%-to-1%-in-1-minute battery issue so I thought this would cure it)
Anyway, the working phone had vns-L22c636b120 installed.
So my faulty logic told me to go to update.highcloud.com site and download a full-ota image that started with the same letters, except with an image ending in something higher than 120. I downloaded the VNS-L22C636B384.
I did some fastboot flash operations on the phone, namely boot, system, cache and eventually recovery and recovery2, all flashes went fine, but the phone got stuck at "your phone is booting now". Only fastboot kept working. No recovery booted.
Eventually the phone accepted vns-L22c636b130 image and it now works.
My general question is: If I wanted to upgrade a Huawei phone's android version, what would I need to flash it with, and how? Obviously I am doing something wrong since the phone ends up stuck at the "Your phone is now booting" stage, if I pick anything with a higher number.
PS: During this flashing, I had no access to the recovery, therefore I was unable to 'wipe cache/dalvik' maybe that I was my problem. fastboot erase .... gave permission errors so I couldn't use that either.
Many thanks, -t

Huawei Mediapad M3 Lite 10 (BAH-W09) Bootloop

Hi there,
I got a problem with updating my M3 Lite: First I unlocked the bootloader, installed TWRP 3.2.0-0 and then lineage-16.0-20191112-UNOFFICIAL-bach.zip without Gapps. Booted into Lineage and everything went fine.
After that I installed via TWRP version 3.3.1-0 of TWRP and rebooted into TWRP. Then I reset the M3 and installed via Fastboot TWRP 3.3.1-3 and tried to reboot into TWRP but had no luck. Now I'm stuck with the screen saying "Your device has been unlocked and can't be trusted". Wether I try to boot with holding Volume Up or Volume Down, I always got back to that screen. Unfortunatly I can't even get into Fastboot mode.
Did I brick my M3 Lite or has somebody a clue how to fix that bootloop?
same problem here
Same here, would love to hear if anyone has any info on this!
Hi !
If you can't put your device in TWRP, I guess that there's is no way to recover your device. Unfortunately it happens also to me with two different Huawei devices ... I fixed my devices after I googled about unbrick Huawei tools, there's 2 or more tools which are able to fix your device, but unfortunately they are not free.
Bring them to Huawei's service center
clemsche said:
Hi there,
I got a problem with updating my M3 Lite: First I unlocked the bootloader, installed TWRP 3.2.0-0 and then lineage-16.0-20191112-UNOFFICIAL-bach.zip without Gapps. Booted into Lineage and everything went fine.
After that I installed via TWRP version 3.3.1-0 of TWRP and rebooted into TWRP. Then I reset the M3 and installed via Fastboot TWRP 3.3.1-3 and tried to reboot into TWRP but had no luck. Now I'm stuck with the screen saying "Your device has been unlocked and can't be trusted". Wether I try to boot with holding Volume Up or Volume Down, I always got back to that screen. Unfortunatly I can't even get into Fastboot mode.
Did I brick my M3 Lite or has somebody a clue how to fix that bootloop?
Click to expand...
Click to collapse
Hi! How can I unlock the bootloader, my tablet doesn't have imei and all methods that I found required the imei.
Which method did you use?
Thanks!

Can flash ROMs but can't boot them

I have a Huawei P10 Lite WAS-LX1. I had its bootloader unlocked in a phone repair shop (by shorting testpoint).
Now it always greets me with the message "Your device has been unlocked and can't be trusted".
I can load the boot into the bootloader and I can flash TWRP (I tried 3.4.0 and 3.3.1 from DarkJoker360 and also the one from Pretoriano80).
I am also able to flash system images, for example LineageOS from DarkJoker360.
At first that seemed to work to some extent: the new system kept crashing but at least it was booting.
I tried again and again and at some point I wiped everything but the sdcard using TWRP (that is, including the vendor partition). I suspect that's what I did wrong, because presently I can no longer boot into the ROM I am flashing. Instead, the phone waits for a few seconds, then vibrates once and restarts. The second time, it boots into "Huawei eRecovery" (where I can "Download latest version and recovery", "Wipe data/factory reset", "Reboot" or "Shutdown"). I am afraid of attempting to go back to the stock ROM as I wouldn't want the bootloader to become locked again.
Since I can still boot into both the bootloader and the recovery, I have hope I can recover. But I don't know how.
Does anyone understand what happened (and could explain)?
Also, does anyone know how I could boot into the ROM again?
Never mind. I went back to stock. Also, the bootloader became locked again during the process, so I will not try again.

Categories

Resources