Hello community,
i have moto E4 XT1760.
after accidently deleting cache and userdata partition via fastboot i am stuck in stock recovery mode and i need to boot into bootloader menu.
i was able to boot into bootloader before i boot into recovery mode. now the command interface in the recovery mode after holding some buttons doesn't appear and can't boot into bootloader menu.
i tried [reboot (volume up+power) + bootloader menu(volume down+power)] combination but doesn't work also tried [remove the battery to shutdown + bootloader menu(volume down+power)] but no luck.
so my question is can i get out recovery mode?
Flash using sp flash tool.
I also have a Moto e4 xt1760 .
Just download mtk vcom drivers and stock rom of Moto e4 and flash it using so flash tool.
But remember only select ""download"" in options not ""format all+download"" or you will lost your baseband.
After flash you probably will lost your imei which is easily restorable if you have stock rom.
Related
I successfully Flashed Recovery using FastBoot but whenever I am going into recovery mode by pressing VOL DOWN+POWER it just shows OnePlus LOGO and nothing happens after it.
What should I do ?
I was using CW 13 with TWRP but then I FLASHED OXYGEN OS 3.0 and cleared the cache. After that, It is loading into OXYGEN but there is no developer options over there and it is not even going in recovery mode now.
HELP!
http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967
try this method. I tried and solved the problem.
Boot your phone into fastboot and on your pc, try 'fatboot oem device-info'
If it's locked, you're as ****ed as I was, my thread here.
(
You will have to go with Bhalla's unbrick guide
Tutorial on how to still get into your OS and save your stuff is in my thread - fastboot continue
)
If your bootloader is unlocked, try flashing this recovery (modified TWRP).
If it doesn't work - unbrick guide.
Afterwards, use the OOS 3.0 installation guide from Bhalla
try this
piyushmodi01 said:
I successfully Flashed Recovery using FastBoot but whenever I am going into recovery mode by pressing VOL DOWN+POWER it just shows OnePlus LOGO and nothing happens after it.
What should I do ?
I was using CW 13 with TWRP but then I FLASHED OXYGEN OS 3.0 and cleared the cache. After that, It is loading into OXYGEN but there is no developer options over there and it is not even going in recovery mode now.
HELP!
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-2/general/oneplus-solution-hard-bricked-device-t3183449 it worked i can now go into stock recovery...... Need to root but TWRP is not flashing any suggestions?
I Just Rooted My Zenfone 2 Laser ZE500kG..
After Root I Tried To Unlock Bootloader..But My Phone Stack At The Logo And Not Opening..I Can't Access My Recovery....And No Other Recovery Is Installed..What Should I Do??Please Answer..
Are you able to boot into fastboot mode? If you hold the volume up and power on, you should see the text fastboot.
If you are able to get into fastboot, you can use a computer with fastboot to flash a recovery ROM such as TWRP.
I tried rooting my coolpad note 3 by flashing twrp recovery img to it... I successfully flashed it as per SP flash tool.. At least the application says so.. Then I tried to enter the twrp recovery mode by pressing the power and volume up buttons.. but it would only be back to the stock recovery mode.. Twrp won't open on it... Can you please help me.. Also usb debugging is enabled and so is OEM unlocking
i had locked mi 5c bootloader accidently with twrp recovery and custom rom with no official rom
and cant be flashed by fastboot xiaomiflash and cant be booted into recovery to flash with chinese pc suite
and its not qualcomm to use pinout to edl and flash
my phone stucks on fastboot logo
is there any real solution for this mi5c with surge1 chipset?
best regards
please check all description befor replaying i had tried many common ways..
bashir_cfz said:
i had locked mi 5c bootloader accidently with twrp recovery and custom rom with no official rom
and cant be flashed by fastboot xiaomiflash and cant be booted into recovery to flash with chinese pc suite
and its not qualcomm to use pinout to edl and flash
my phone stucks on fastboot logo
is there any real solution for this mi5c with surge1 chipset?
best regards
please check all description befor replaying i had tried many common ways..
Click to expand...
Click to collapse
I have a mic5c it was on fake global rom with twrp recovery I had accidently locked bootloader and its not booting and cant be booted to system or recovery
its not flashing and can't be flashed in fastboot because boot loader is locked
its not flashing can't be flashed with Chinese pcsuite because it's recovery is custom and not the stock or official one so its not entering to recovery
its justso stuck on fastboot mode and can't enter to edl mode bcause it's not Qualcomm so is there any solution to unbrick the phone?
bashir_cfz said:
I have a mic5c it was on fake global rom with twrp recovery I had accidently locked bootloader and its not booting and cant be booted to system or recovery
its not flashing and can't be flashed in fastboot because boot loader is locked
its not flashing can't be flashed with Chinese pcsuite because it's recovery is custom and not the stock or official one so its not entering to recovery
its justso stuck on fastboot mode and can't enter to edl mode bcause it's not Qualcomm so is there any solution to unbrick the phone?
Click to expand...
Click to collapse
any solution? please help me..
uppp
Hello guys. I have a zte axon 7 mini b2015. I flashed twrp 7.1.1 via flashify but it couldn't boot t9 recovery. By then it was able to boot to system. The mistake i made was to then flash the no verity boot.img by tdm. I was on android 5 when i flashed the no verity boot img. Now phone is stuck in fastboot mode, i can't enter any other mode. I have tried edl yet but my problem is finding an edl firmware for this model b2015 i have only been seeing b2016 files. Are they compatible considering the b2016 uses sd617 while the b2015 uses sd616 if am not mistaken. Somebody help me revive my phone