Database Users

Need some help please!!!!

Hi there, I am from Thailand and I have problem with my A500. That i cannot access to the recovery mode and it shows picture of Android with this "!" symbol. The main problem is that i cannot update my firmware over the OTA when it completed download firmware and i installed it and then it appeared this "Update is invalid and has been canceled". So please help me to fix this problem, i really want to use 3.1!!!

Known issue. Acer have reportedly now pulled the 3.1 update whilst they fix the problem, and will re-issue it "tomorrow".
Otherwise, so far, the only known fix is to keep trying until it works.

Thank you for your reply FloatingFatMan. How about the issue that it cannot access to the "recovery mode", i have tried to update firmware myself and i stuck with this problem. Do you have any ideas for that???

Honor 7 died?

Hi, i have a problem yesterday i put a manual updated and then never start, it's reboot itself allways, my bad luck not end there after that i try to unlock the bootloader so i put the information on the website and works but when i copy the code the PC shut down and when i try it again my phone wont start.
I download the stock rom from oficial page and i receive a RED ! when it's 5%
my device is PLK-TL01H

Meizu MX 4 Pro - Boot loop and firmware corrupt

Hi,
Bought the Meizu MX4 Pro recently. But upon first switch on, i got the screen showing: battery < 20%, cannot proceed with upgrade.
Now, once the battery was charged, i got the recovery screen to update and clean (With Flyme Logo), or to restart. Upon choosing restart, it stuck on the Flyme logo rotating...
I have downloaded the Flyme OS (5A, 4.5.7A, 4.5.7.1A, 4.5.7I) and placed it in the recovery drive of the mobile when connecting to a pc... but each and everytime, the screen shows checking firmware, then Firmware corrupt sign appears...
Thanks to point me in right direction... or what steps i need to follow to restore the mobile... I cannot find a dedicated forum for Meizu MX4 pro, only Meizu MX... i will try to post it there too, but if there is a better link please let me know...
Thanks,
Jinen

same problem! did you solve it? and even if i wanna clear data a screen with the unblock numbers appears and when i write my code i can't because there is just like 1 point every time i click instead 4 points so i must to restart again and the globe rotate again and system upgrade is always corrupt doesn't matter which firmware old or the latest... :S

Jinen_A said:
Hi,
Bought the Meizu MX4 Pro recently. But upon first switch on, i got the screen showing: battery < 20%, cannot proceed with upgrade.
Now, once the battery was charged, i got the recovery screen to update and clean (With Flyme Logo), or to restart. Upon choosing restart, it stuck on the Flyme logo rotating...
I have downloaded the Flyme OS (5A, 4.5.7A, 4.5.7.1A, 4.5.7I) and placed it in the recovery drive of the mobile when connecting to a pc... but each and everytime, the screen shows checking firmware, then Firmware corrupt sign appears...
Thanks to point me in right direction... or what steps i need to follow to restore the mobile... I cannot find a dedicated forum for Meizu MX4 pro, only Meizu MX... i will try to post it there too, but if there is a better link please let me know...
Thanks,
Jinen
Click to expand...
Click to collapse
Which your flyme version A o I? Do you remember the version that you have before flash? Try flash With 4.2.8.2(With the correct version A or I) good luck
Sent from my MX4 using Tapatalk

I have same problem.
javimad86 said:
same problem! did you solve it? and even if i wanna clear data a screen with the unblock numbers appears and when i write my code i can't because there is just like 1 point every time i click instead 4 points so i must to restart again and the globe rotate again and system upgrade is always corrupt doesn't matter which firmware old or the latest... :S
Click to expand...
Click to collapse
I have some problem with you, after I upgrade Firmware International to China. Before I don't now what firmware I use, I just follow step at internet tutorial upgrade Flyme OS, and I have wrong download firmware China. After that while I want to upgrade again the PIN password just can click only one number even though my PIN is 6 number. So while I click the first PIN the Command saya "Password is Wrong".
What I have to do please help me about this problem ...?

If your on (I) International download (I) version if your on (C) China download and so fourth. I found this site and it has worked for me https://www.flyme.cn/firmwarelist-7.html By the way Beta will never work on the Chinese model since they went with the only 3 traditional firmware upgrades for outside actual China itself! Hope this helps it owrked for me and I am on the Chinese model.

Downgraded from RR to official stock 6.0.1, while updating to Android N it bricked..

Urgent help needed, is there anyone who knows how to start the phone when it gets bricked. I just downgraded it and when I updated it to official android N the phone just got bricked, it is giving no response to the keys, when I keep it on charging the led on the right of the FP sensor blinks. Is there anyway to on it?
Please help me!!!!!

osmrv said:
Urgent help needed, is there anyone who knows how to start the phone when it gets bricked. I just downgraded it and when I updated it to official android N the phone just got bricked, it is giving no response to the keys, when I keep it on charging the led on the right of the FP sensor blinks. Is there anyway to on it?
Please help me!!!!!
Click to expand...
Click to collapse
What stock ROM did you have prior to flashing RR, and what update did you attempt to apply?
2 things to try:
1)Try holding the power button down for 2-3 minutes, this can force a hard reboot which might get your device to run.
2)If that doesn't work, plug your device into your computer, does it register as 'Moto G4' or as 'Qualcomm HS-USB Bulk 9008' or similar?
If the 2nd, you may wish to look into using a blank-flash (https://forum.xda-developers.com/showpost.php?p=71405834&postcount=23), however this blank-flash only appears to work if you were on the March 2017 stock firmware or lower, the June 2017 firmware will not accept the blank-flash.

Firstly I was on the june security patch update then I moved to RR, when flashed MM and updated then it got bricked.
I have tried all the methods to boot it into bootloader but all went in veins..

Ah, so you were on the June update previously? Unfortunately, the blank flash we've got doesn't work and sadly you're not the only one, we've got many reports now of devices updating to the June 2017 update and then bricking from downgrading, or somehow downgraded and then bricked when flashing an OTA.
Currently, the only resolutions appear to be sending your device for repair at a service centre (and you may have to pay for the repair), or save up funds for a new device

when will the blankflash file will be available, any idea?

I have a set of 3 different blankflash files available from different locations. I haven't tested these, so don't blame me if your device doesn't work as expected:
https://www.androidfilehost.com/?w=files&flid=175273

brick onplus 5

Hello everyone would like to help me solve my brick problem of my op5 since the day of the date and tried everything that is within my reach without success. the only unbrick that starts on my device is the nougat but dejandomo if I can start my wifi and can not update any ota by any means. and when I use another unbrick tool, either oreo in its two verifications or foot installs correctly but it remains hanging in the logo of restart. please help