Hi all.. I have an old Yureka phone which has gone into bootloop while installing some ROM a few months back. Since then I'm using another phone but i would love to have this phone running as a backup.
Last thing i remember was installing Nitrogen OS 8.1, which worked fine for sometime, then i tried to install a pie ROM which possibly caused the bootloop. I can still get into my recovery but thats about it. It allows me to install new ROMS but when i reboot, Yu logo appears and then the system reboots with a vibration.
Can someone suggest the best way to get my yureka running? Any help is greatly appreciated.
Thanks.
Related
Hello, Newbie Here!
So I recently flashed the Resurrection Remix ROM Build 6.8 and Kernel 6.2.
The Build is rather stable and In my honest opinion better than CM12.1 which I was on previously.
So the normal functions of the phone are normal and I feel this is a much stable build. I use a ASUS Zenfone 5(ASUS_T00F)
But I face random reboots where the phone restarts itself and gets stuck at the boot. Only when i try to force reboot from the bootloop screen does the phone restart normally and even that takes three or four attempts. First I thought it was just getting used to the new Kernel then when this started occurring frequently I became more aware that this might just be a potential risk.
Today afternoon, My Phone was literally stuck at bootloop for 2 hours.... Only when I tried to do three-four manual forced reboots by pressing my power key and with each instance entering the TWRP mode and doing a dalvik and cache wipe only then was I able to boot up my phone normally.....It totally drained the battery though. I was at 78% and when my phone finally booted up I was shocked to see just 1% charge left.
Everytime this issue occurs...either the phone is completly stuck in bootloop or goes to the "Android is upgraing your apps" notification and then again comes back to the bootloop.
I have also done two fresh flashes before this as well so I know its got nothing to do with a dirty flash.
I then started googling for the same issue that other Zenfone 5 users might be experiencing but to my shock...No threads on it could be found with the issue that Im experiencing.
Pretty frustrated right now I have no clue what to do.
Donot want to go back to STOCK ROM..It sucks.
Please help Guys!
Hello.
You should try to format system and reinstall the rom + xposed. After that you can format data, cache, internal storage. I hope that it will help you.
And did you have this problem on CM12.1?
tank0412 said:
Hello.
You should try to format system and reinstall the rom + xposed. After that you can format data, cache, internal storage. I hope that it will help you.
And did you have this problem on CM12.1?
Click to expand...
Click to collapse
Yup. Tried all this.
Just format again and re flash rom with xposed it fixed my bootloop.
The solution is,
Go back to stock rom. ???
Can anyone tell me how to back stock ROM from resurrection remix???
yasin0005 said:
Can anyone tell me how to back stock ROM from resurrection remix???
Click to expand...
Click to collapse
Download latest firmware from Asus' Support Page. And flash it via adb sideload.
I m now on Stock Rom without any problems no screen freeze no bootloops ...
First of all I'm not a very techy girl so please give me step by step instructions to recover my Yureka (Phone Details are given below). Few days ago (as usual) I restarted my phone and suddenly noticed a weird thing, It was stuck at YU-bootscreen/Logo for many minutes but suddenly started getting booted but I ignored it. I never knew it's going to be a big mess soon. After few days I again rebooted my phone but this time it refused to boot, the same situation. It was stuck at YU Logo. I waited for a long time but no gain. Screen was constantly on and it was literally scaring me. finally I ejected/removed the battery forcefully and reinserted it and restarted the phone and again after getting stuck at YU Logo/bootscreen for a while it got booted and it was a relief of sign. Here comes the main problem. Again after few days Yureka started hanging as usual and I again rebooted it but this time it was dead-end for me. It's again stuck at YU Logo Screen. I tried restarting/removing the battery many times but no luck. It's stuck at the screen forever. I am trying/restarting/reinserting-the-battery again and again but seems it's stuck forever at the bootscreen. It's been few days but no luck. I am totally frustrated and don't know what to do! I have important data in the phone especially App Data like Hike/WhatsApp and some GamesData/SMSes/Contacts etc. Please guys help me. How to revive my Yureka without damaging the precious data?
Things I tried to solve the problem:
1) I removed the battery many times. I did reboots many times.
2) I tried "Wipe cache partition" option in the recovery menu (Power+Volume Up+Volume Down) multiple times. But no gain.
What could be the reason of this problem? Is this faulty internal memory? Because my phone is behaving weird since the day I purchased it. Random App crashes happen multiple times regularly. This service stopped that service stopped blah blah. It's so annoying and counter-productive. It Started hanging and lagging a lot too. And finally bricked. I think this bricking problem only happens when you fiddle with your OS or try to root or install any unsupported custom ROM, But I am on stock ROM then why did it happen with me? Hardware defect? Did I get a faulty phone? I always ignored App crashes/Google services crashed /Random auto-reboots because I though Cyanogen OS is prone to bugs. But this is insanely odd! So many bugs are too much. Stock ROM has to be stable. I think YU gave me a faulty device! Please help me. What to do now to turn on my device without losing the data? I didn't try the Wipe data/factory reset OR Wipe media because it will remove all of my data which is very important to me.
P.S. Please note that my phone is stuck at YU Logo (NON-Animated logo) NOT on Cyanogen Logo.
One Another Indication of the problem:
When I tried to charge my phone by turning it off completely and then connected the charger with it the same YU logo came up and screen never went blank/off (screen with YU logo was constantly ON) and the Red LED light (charging indicator) didn't turn on, It means I can't even charge my battery because I think it's not getting charged cuz it's stuck on the same screen and never shows battery indicator while soft-pressing power button curiously just to check I removed the battery and tried connecting the charger without battery in the phone and the Red LED turned on normally.
Phone Details:
Phone Model: simple YU Yureka A05510 (NOT YU Yureka plus)
Cyanogen 11.0-XNPH05Q (Android KitKat 4.4.4) (NEVER updated Yureka)
NEVER rooted
Stock Cyanogen ROM
Stock Cyanogen Recovery
Are you sure it's still on KitKat?
Please confirm once again then I'll give you flashing guide.
saurav007 said:
Are you sure it's still on KitKat?
Please confirm once again then I'll give you flashing guide.
Click to expand...
Click to collapse
Yes it's KitKat 4.4.4
Download CM11 fastboot.zip and follow the flashing instructions from here.
This will erase everything from your device. If you don't want to lose data then download CM11 signed zip and flash it manually from stock recovery.
saurav007 said:
Download CM11 fastboot.zip and follow the flashing instructions from here.
This will erase everything from your device. If you don't want to lose data then download CM11 signed zip and flash it manually from stock recovery.
Click to expand...
Click to collapse
Hi! When the problem occurred I was thinking about the same solution, I mean flashing the ROM by putting it on a SD card. But I've two confusions on my mind
1. Should I directly flash CM 11.0 (the same ROM which I have currently) or the upgraded CM 12.0 (Lollipop)? I am confused
2. When this catastrophe happened, free space on internal memory was very low (I don't remember exactly but may be 100MB or 200MB or 300MB but very low). Will the ROM flashing process complete successfully?
Sarika CoolGirl said:
Hi! When the problem occurred I was thinking about the same solution, I mean flashing the ROM by putting it on a SD card. But I've two confusions on my mind
1. Should I directly flash CM 11.0 (the same ROM which I have currently) or the upgraded CM 12.0 (Lollipop)? I am confused
2. When this catastrophe happened, free space on internal memory was very low (I don't remember exactly but may be 100MB or 200MB or 300MB but very low). Will the ROM flashing process complete successfully?
Click to expand...
Click to collapse
1. COS12.1 Signed zip can be used to flash directly over COS11, but since there is lots of things happening in your phone, I'd suggest you to flash COS11 first.
2. 300MB is very low. Use external SD card because the size of signed zip is 500 MB.
Solution
Guyss plz plzz help me out, even my yureka has started behaving like this, im really fed up i tried many things but no use i tried the following things
1.installed stock rom using fastboot
2.flashed cm11 signed zip using recovery
3.clearing cache in storage
4.wiping dalvik and normal cache
Currently now i am using cm11 signed zip version
Hello,
My Yu Yureka was running perfectly until yesterday. I had installed Lineage 14.1 and was enjoying a good Android Experience.
Yesterday,due to battery issues I put my phone in Extreme Battery saver mode during which I started taking HDR pictures.All of sudden My phone started rebooting on and on with just the YU logo .I noticed that only when I switch on Mobile Data that happens. Since I thought this was some ROM glitch,I downloaded the latest update and then installed it. But alas,still had the same Problem.
Today ,I wiped the Dalvik cache,cache,system files and then tried rebooting....Unlike last time ,this time it got totally stuck in the YU screen. I waited for hours but still no hope. Thus I Wiped EVERYTHING...and then tried installing the same Update which I had downloaded in my SDcard. But now this time,TWRP screen quit without any notice and then opened again....thus wasn't able to install any OS. Now WHAT THE HECK DO I DO?
THANKS IN ADVANCE
It is not ur fault bruh...
Most probably your battery is dead,
Now, it's time for a new battery, and remember, always buy battery from a authorized MMX care, or u will end up getting fake one
Arunachaleshwar said:
Hello,
My Yu Yureka was running perfectly until yesterday. I had installed Lineage 14.1 and was enjoying a good Android Experience.
Yesterday,due to battery issues I put my phone in Extreme Battery saver mode during which I started taking HDR pictures.All of sudden My phone started rebooting on and on with just the YU logo .I noticed that only when I switch on Mobile Data that happens. Since I thought this was some ROM glitch,I downloaded the latest update and then installed it. But alas,still had the same Problem.
Today ,I wiped the Dalvik cache,cache,system files and then tried rebooting....Unlike last time ,this time it got totally stuck in the YU screen. I waited for hours but still no hope. Thus I Wiped EVERYTHING...and then tried installing the same Update which I had downloaded in my SDcard. But now this time,TWRP screen quit without any notice and then opened again....thus wasn't able to install any OS. Now WHAT THE HECK DO I DO?
THANKS IN ADVANCE
Click to expand...
Click to collapse
Flash yureka fastboot files first then unlock bootloader and go for any custom rom.
I personally prefer lineage OS 15.0 Oreo( it is almost stable using since more than 15 days)
Say Thanks if it has helped you
Without fail every time after the lg logo disappears after flashing a custom rom made for the h918 lg v20 I get a flashing black screen. I'm doing a factory reset/wiping davlik cache/ cache/ and data 3 times each time I flash the custom rom and sometimes I even go as far as wiping the internal memory completely even after a factory reset but no matter what I try without fail I always get the flashing black screen right after the lg logo disappears. I even tried upgrading twrp from 3.0.2.0 to 3.1.1.0 and I even tried flashing the no-verity-opt-encryption 5.1 and 6.0 but nothing I've tried seems to fix it so I'm asking for help now since I've exhausted my knowledge on what could fix it. What can I do to fix that issue so I can finally start using custom roms again? Any help would be most appreciated thanks in advance.
P.S. The only rom I could get to flash successfully was the stock twrp flashable t-mobile rom on one of the threads in the rom section of the lg v20 forum so for now until I can fix that issue I'm currently running that so I have a phone I can still use.
raze5115 said:
Without fail every time after the lg logo disappears after flashing a custom rom made for the h918 lg v20 I get a flashing black screen. I'm doing a factory reset/wiping davlik cache/ cache/ and data 3 times each time I flash the custom rom and sometimes I even go as far as wiping the internal memory completely even after a factory reset but no matter what I try without fail I always get the flashing black screen right after the lg logo disappears. I even tried upgrading twrp from 3.0.2.0 to 3.1.1.0 and I even tried flashing the no-verity-opt-encryption 5.1 and 6.0 but nothing I've tried seems to fix it so I'm asking for help now since I've exhausted my knowledge on what could fix it. What can I do to fix that issue so I can finally start using custom roms again? Any help would be most appreciated thanks in advance.
P.S. The only rom I could get to flash successfully was the stock twrp flashable t-mobile rom on one of the threads in the rom section of the lg v20 forum so for now until I can fix that issue I'm currently running that so I have a phone I can still use.
Click to expand...
Click to collapse
did you ever find a solution? I'm having the exact same issue and am pulling my hair out trying to get something to work
If the version number of twrp your using is in fact 3.1.xx then that could be your problem all the new roms im almost positive need the newest twrp from pheonix i think it 3.2.3.4 its in the deveopment section...ive heard alot of problems on this device with older interations of twrp. I would start there
https://forum.xda-developers.com/showpost.php?p=77177529&postcount=6
Phoenix591 said:
Official lineage 14.1 only works with pre10p h918, some firmware blobs need changed.
I just built an unofficial for my own use a few days ago that should work, but I havnt gotten around to testing it yet.
lineage-14.1-20180721-UNOFFICIAL-h918.zip
lineage-14.1-20180721-UNOFFICIAL-h918.zip.md5
When lineage 15.1 becomes official the h918 builds will be aimed at post10p. x86cpu is currently doing unofficial builds for both.
Click to expand...
Click to collapse
Hey,
I have been using the ColtOS rom based on Oreo 8.1.0 for quite sometime now. I had it rooted with Magisk too. I have the latest version of TWRP installed (version 3.3.0). I had no problem until now where it just randomly tried to reboot after I ended a call. It did reboot fine once, but it was when i ended a second call that it got stuck in a bootloop.
I have tried everything, clearing the cache/Dalvik , wipe data and system and flashed three different Oreo ROMs, uninstalling Magisk. However, I can only go as far as the set-up screen after the new ROM boots, after which it goes back to rebooting itself endlessly.
I seem to have exhausted all my options, any kind of help to restore my phone will be greatly appreciated.
Thank you.
I have found out that I can flash new ROM and even set up the phone by logging into Google, only when I connect my phone to my laptop. It even installs all the previous apps and data and thats it. It reboots to the lockscreen and when I try to unlock it, it reboots again. And this is all only when I keep the phone connected to my laptop, otherwise,it keeps looping into the bootscreen logo.
AndroGuy18 said:
Hey,
I have been using the ColtOS rom based on Oreo 8.1.0 for quite sometime now. I had it rooted with Magisk too. I have the latest version of TWRP installed (version 3.3.0). I had no problem until now where it just randomly tried to reboot after I ended a call. It did reboot fine once, but it was when i ended a second call that it got stuck in a bootloop.
I have tried everything, clearing the cache/Dalvik , wipe data and system and flashed three different Oreo ROMs, uninstalling Magisk. However, I can only go as far as the set-up screen after the new ROM boots, after which it goes back to rebooting itself endlessly.
I seem to have exhausted all my options, any kind of help to restore my phone will be greatly appreciated.
Thank you.
I have found out that I can flash new ROM and even set up the phone by logging into Google, only when I connect my phone to my laptop. It even installs all the previous apps and data and thats it. It reboots to the lockscreen and when I try to unlock it, it reboots again. And this is all only when I keep the phone connected to my laptop, otherwise,it keeps looping into the bootscreen logo.
Click to expand...
Click to collapse
Flash crdroid nougat