Database Users

[Q] Boots Into "No Command" Screen

Tried my best to search the forums for anyone else having this issue, couldn't find much.
My N7 isn't rooted at all. It worked fine until last night, the screen wouldn't turn on so I held the power button down to turn it off, booted it back up and it goes into a screen with a red triangle and says "No Command". It sits on this screen for a while and then reboots, and does the same over and over. I can get into fastboot (it also throws the "No Command" when trying to get into recovery), but I'm not sure what my options are. I'm hoping I don't have to resort to wiping the device, so any suggestions would be appreciated, thanks!

AW: [Q] Boots Into "No Command" Screen
When you boot in recovery and the red triangle appears, have you tried to press volume down and power again? It should boot in recovery
Sent from my SK17i running Android 4.1.2

Use fastboot to flash a custom recovery, and then do a nandroid backup. From there, you can mess around without fear of losing your data. Perhaps you will need to re-flash the boot or system image, but I can't imagine what could have happened to it in the first place.

AW: [Q] Boots Into "No Command" Screen
korockinout13 said:
Use fastboot to flash a custom recovery, and then do a nandroid backup. From there, you can mess around without fear of losing your data. Perhaps you will need to re-flash the boot or system image, but I can't imagine what could have happened to it in the first place.
Click to expand...
Click to collapse
He said he has no root and so I guess the bl is locked so he would loose his data while unlocking, right?
Sent from my SK17i running Android 4.1.2

I contacted support and they pretty much immediately started to process an RMA. She said someone had called in earlier today with the same problem and they couldn't figure anything out. I have a feeling they don't send new ones for these types of things, so I'm still going to try to fix mine. Thanks for the suggestions.
Here's a pic, I'm still confused on how little I've found about this "No Command" screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mihahn said:
When you boot in recovery and the red triangle appears, have you tried to press volume down and power again? It should boot in recovery
Sent from my SK17i running Android 4.1.2
Click to expand...
Click to collapse
Woah, did you mean power and volume UP? Because that works... it brings up the recovery menu.....
Am I missing something? Is it normal to have to press power + volume up to see the recovery menu?

Okay, so I guess the real problem is that I'm stuck booting into recovery. Was there an OTA update?

I ended up fixing this. Once I realized what I was seeing was recovery mode, I tried clearing data + cache, but that didn't work. Still booted into recovery mode every time. I went through the mess of installing the right drivers (no idea if it's just me but I always have issues with my computer recognizing my devices), and I used the android SDK to unlock the bootloader and then flashed the factory image. Lost all my data but oh well, better than going through the RMA process.
Thanks again for the help. I seriously would have never realized that silly screen was recovery. Why can't it just show the menu by default...
edit: one other thing, the biggest hurdle I ran into was that I didn't have the drivers installed at all. but since I couldn't boot up I couldn't install the adb driver. I was able to install the fastboot one just fine, but the fastboot commands didn't work until I installed the adb driver. only way I was able to install the adb driver was to go into the 'sideload using adb' option in recovery, at that point windows prompted for the drivers. not sure if there's a manual way of installing the driver but yeah. hopefully that made some sense.

Leadsuit said:
Woah, did you mean power and volume UP? Because that works... it brings up the recovery menu.....
Click to expand...
Click to collapse
Just for future reference, when at the red triangle, you can get into recovery by holding vol up and power?
Sent from my SGH-I777 using xda premium

From efrants android 101 sticky:*I just flashed CWM, but every time I try to boot into CWM, I keep seeing the stock recovery. Why?If you updated your Android build using an OTA update file (either manually or over-the-air), the update placed two files on your device that re-flash the stock recovery every time you reboot your device. These two files are:/system/etc/install-recovery.sh <== this is the script that installs the patch file/system/recovery-from-boot.p <== this is the patchYou have to rename (or delete) one or both of them, then re-flash your custom recovery. Now it will stick.
Sent from my GT-I9300 using xda premium
---------- Post added at 06:17 AM ---------- Previous post was at 06:10 AM ----------
That is the cause of the No Comnand screen.
Sent from my GT-I9300 using xda premium

please explain the steps to fix the NO COMMAND on your tablet
Leadsuit said:
I ended up fixing this. Once I realized what I was seeing was recovery mode, I tried clearing data + cache, but that didn't work. Still booted into recovery mode every time. I went through the mess of installing the right drivers (no idea if it's just me but I always have issues with my computer recognizing my devices), and I used the android SDK to unlock the bootloader and then flashed the factory image. Lost all my data but oh well, better than going through the RMA process.
Thanks again for the help. I seriously would have never realized that silly screen was recovery. Why can't it just show the menu by default...
edit: one other thing, the biggest hurdle I ran into was that I didn't have the drivers installed at all. but since I couldn't boot up I couldn't install the adb driver. I was able to install the fastboot one just fine, but the fastboot commands didn't work until I installed the adb driver. only way I was able to install the adb driver was to go into the 'sideload using adb' option in recovery, at that point windows prompted for the drivers. not sure if there's a manual way of installing the driver but yeah. hopefully that made some sense.
Click to expand...
Click to collapse
please explain the steps to fix the NO COMMAND on your tablet?
tHanks

help please
Leadsuit said:
I ended up fixing this. Once I realized what I was seeing was recovery mode, I tried clearing data + cache, but that didn't work. Still booted into recovery mode every time. I went through the mess of installing the right drivers (no idea if it's just me but I always have issues with my computer recognizing my devices), and I used the android SDK to unlock the bootloader and then flashed the factory image. Lost all my data but oh well, better than going through the RMA process.
Thanks again for the help. I seriously would have never realized that silly screen was recovery. Why can't it just show the menu by default...
edit: one other thing, the biggest hurdle I ran into was that I didn't have the drivers installed at all. but since I couldn't boot up I couldn't install the adb driver. I was able to install the fastboot one just fine, but the fastboot commands didn't work until I installed the adb driver. only way I was able to install the adb driver was to go into the 'sideload using adb' option in recovery, at that point windows prompted for the drivers. not sure if there's a manual way of installing the driver but yeah. hopefully that made some sense.
Click to expand...
Click to collapse
hi Sir! I'm having the same problem, please help me. i dont know anything about adb drivers..

please tell me steps to use adb side load my android spice dream uno mi498
Leadsuit said:
I ended up fixing this. Once I realized what I was seeing was recovery mode, I tried clearing data + cache, but that didn't work. Still booted into recovery mode every time. I went through the mess of installing the right drivers (no idea if it's just me but I always have issues with my computer recognizing my devices), and I used the android SDK to unlock the bootloader and then flashed the factory image. Lost all my data but oh well, better than going through the RMA process.
Thanks again for the help. I seriously would have never realized that silly screen was recovery. Why can't it just show the menu by default...
edit: one other thing, the biggest hurdle I ran into was that I didn't have the drivers installed at all. but since I couldn't boot up I couldn't install the adb driver. I was able to install the fastboot one just fine, but the fastboot commands didn't work until I installed the adb driver. only way I was able to install the adb driver was to go into the 'sideload using adb' option in recovery, at that point windows prompted for the drivers. not sure if there's a manual way of installing the driver but yeah. hopefully that made some sense.
Click to expand...
Click to collapse
I have spice dream uno 498 6.0.1 my phone showing no command Pls tell me steps of using adb +command to give via pc

Possibly bricked device, need D80020y image? (URGENT)

Hi, I was trying to update my LG G2 D800 to Lollipop using this guide:
http://webtrickz.com/how-to-update-lg-g2-to-official-lollipop-os/
However, after the device rebooted, it went to the LG logo screen, displayed this message in the top left corner, and went to an indefinite black screen.
boot certification error
secure booting error
cause: boot certification verify
Holding down the power button for about 15 seconds turns the device off, but sometimes it turns itself back on and does it again. Turning it off, then quickly holding volume down and power button, releasing on logo, then holding again brings it to a "Factory Data Reset" screen, however, doing a reset does nothing and puts me immediately back to the same problem.
Holding volume up and plugging it into my PC does the same thing, and when plugged in, windows recognizes about 20 "unformatted drives", and shows it as QHSUB_BULK in device manager, under other devices.
Before this, I was running stock 4.4.2, D80020y, rooted with towelroot. I had attempted to create a TWRP recovery, and it said it succeeded, however it was unable to boot to recovery.
I was going to try to fix it using this thread: http://forum.xda-developers.com/showthread.php?t=2582142
However, I am unable to find an img for D80020y.
I have access to a Win 8..1 desktop, and I can run whatever OS necessary in a VM.
Does anyone know where to find one? Or, can anyone provide me with one? Or, is there another way to fix this?
I'm just worried that my device is totally gone at this point, and considering I bought it used, I have no warranty, nor a phone to replace it, currently.
Thanks so much to anyone who can help me!

First off, why didn't you just do an OTA update to Lollipop (via settings/about phone) instead of trying to manually do it? It's a lot easier and you could of avoided all of this...
Anyways, I am not sure what exactly happened (maybe it was a bad flash or maybe you screwed up somewhere), but it looks like you've gotten yourself in a real mess.
Did you triple check that you followed the article step by step? Did other people state in the comments about any problems they faced when using the method?
I have tried that method you linked before, and I used Ubuntu, which is best for that method. However, it did not work for me. I remember going on and on with that and ultimately just flat out replaced my logic board when I had a bricked G2.
And I can totally relate to to the twenty unformatted drives, I have been in same exact situation with the endless windows popups when I plug in my phone, but I never really figured out the issue. I remember before I was stuck in fast boot mode, and after awhile I couldn't even get to fast boot.
Can you get into recovery? Is the phone still alive? If so, you can use this to get back to stock http://forum.xda-developers.com/showthread.php?t=2432476
Hope this helps a bit, I have never been in your situation but if you want a real, simple solution to this: I would purchase and replace your logic board (phone's motherboard). It is a definite fix. If you are not comfortable with that, then I would advise to go ahead and do some research about this. Unfortunately, I have no idea where you can get that img (I do not have a D800, but rather a VS980), but I am sure with some Google searches you can find it.
I have bricked a couple phones in the past, and we all learn from our mistakes!
Best of luck!

fischer12345 said:
*snip*
Click to expand...
Click to collapse
I couldn't do an OTA update, as it's an AT&T phone, unlocked, and was running on TMobile. (Sorry, could've sword I specified that)
I was very careful that I followed all the steps of that article, to the period, but, again, Murphy's Law. I'm not sure what could have gone wrong.
And currently, I've tried every button combination I know and every one I could find from searching, and the only thing I can get into is the hard reset mode, but I cannot actually do a hard reset (just reboots with the same issue).
I've been unable to find specific d80020y img files after quite a bit of searching, but I will continue, and I've also contacted LG support in the event that by some act of god they can provide me with the files or another fix.

Jtpetch said:
I couldn't do an OTA update, as it's an AT&T phone, unlocked, and was running on TMobile. (Sorry, could've sword I specified that)
I was very careful that I followed all the steps of that article, to the period, but, again, Murphy's Law. I'm not sure what could have gone wrong.
And currently, I've tried every button combination I know and every one I could find from searching, and the only thing I can get into is the hard reset mode, but I cannot actually do a hard reset (just reboots with the same issue).
I've been unable to find specific d80020y img files after quite a bit of searching, but I will continue, and I've also contacted LG support in the event that by some act of god they can provide me with the files or another fix.
Click to expand...
Click to collapse
Gotcha. I haven't ran into the issue you have been describing at all before, but I just wanted to try to understand this situation a little better, I wish I could tell you what exactly happened.
As far as your problem, here's what I would do. The phone is still alive correct? Contact LG and send that bad boy in. Tell them you used it for a couple of months and all of a sudden it does not work anymore. I think that would be your best bet. However, do not tell them you modified it or whatever you tried to do with it.
Be aware if you do send it in to LG, make sure you have not tried to open up the phone and screw around with it internally. They will not fix it if that is the case. Also, it can be quite pricey depending on your current condition.
Oh, and LG will not provide you with those files, they are there to help you with any kind of phone issue, but not these kinds of issues.
This my friend is the best advice I can give you! Again, another option would be replacing the logic board, but that is ONLY a last resort.
BTW, you didn't hard brick it so that's a plus

I've not got a warranty, nor do I have the funds currently to have it repaired. That would be my last option.
Also, I'm not sure if this is helpful or relevant, but when I plugged it in to my PC just now, and it "recognized" the whole bunch of drives, I clicked through each one to see if it actually accessed anything. The "drive" it labeled "G:" had a single "image" folder in it, containing a bunch of .b00, .b01, .b02, etc files, and some .mdt files. (See picture)
Is this relevant at all? Could this help me?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Jtpetch said:
I've not got a warranty, nor do I have the funds currently to have it repaired. That would be my last option.
Also, I'm not sure if this is helpful or relevant, but when I plugged it in to my PC just now, and it "recognized" the whole bunch of drives, I clicked through each one to see if it actually accessed anything. The "drive" it labeled "G:" had a single "image" folder in it, containing a bunch of .b00, .b01, .b02, etc files, and some .mdt files. (See picture)
Is this relevant at all? Could this help me?
Click to expand...
Click to collapse
can you enter download mode? pressisng VOL UP and then plug your phone and keep button press. does it goes to usb icon with curved arrows?

No download mode for me. Trying to boot to it just brings me the same error, and black screen.

Jtpetch said:
No download mode for me. Trying to boot to it just brings me the same error, and black screen.
Click to expand...
Click to collapse
in device manager whats it says mine said QHSUSB _BULK
i know there are 2 different errors 9006- and 9008 i think.. have you try skr tools? it has the required files. for unbrick read thread. maybe you can use it.. try my link in signature and go to tools and check skr tools. its a 700 mb download as it has most variants needed files laf/boot ect those files you need.

raptorddd said:
in device manager whats it says mine said QHSUSB _BULK
i know there are 2 different errors 9006- and 9008 i think.. have you try skr tools? it has the required files. for unbrick read thread. maybe you can use it.. try my link in signature and go to tools and check skr tools. its a 700 mb download as it has most variants needed files laf/boot ect those files you need.
Click to expand...
Click to collapse
It says the same, QHSUSB_BULK. I've not tried skr tools (never heard of it before now). I'll try that out tomorrow, thank you.

Jtpetch said:
It says the same, QHSUSB_BULK. I've not tried skr tools (never heard of it before now). I'll try that out tomorrow, thank you.
Click to expand...
Click to collapse
do the QHUSB_BULK Fix when u try it (its in 4)
anyway i got my g2 in a much heavier brick,
i have a third party lab that can possibly fix my g2...
its not that expensive....
so I just need to hope they can fix it

Jtpetch said:
It says the same, QHSUSB_BULK. I've not tried skr tools (never heard of it before now). I'll try that out tomorrow, thank you.
Click to expand...
Click to collapse
this happened to me had HQSUSB_BULK showed many drives . but i could enter download mode and flashed KDZ all i had to do was change port 5 to 41.
are you sure you try download mode.? pres VOL UP keep presssing. then plug usb cable . if it shows the usb icon and a bar metter then you can KDZ

raptorddd said:
this happened to me had HQSUSB_BULK showed many drives . but i could enter download mode and flashed KDZ all i had to do was change port 5 to 41.
are you sure you try download mode.? pres VOL UP keep presssing. then plug usb cable . if it shows the usb icon and a bar metter then you can KDZ
Click to expand...
Click to collapse
Yes, I am sure. I just tried it again, though, to confirm. Held volume up, plugged in USB, and it went to the LG logo screen, showed the same error text in the top left, and went to a black screen.
I am downloading the SRKtool right now, and will try as soon as i have it.

Alrighty, so, progress (?).
I did the procedure with SRKtool, and at the end it told me to unplug it from USB and restart it, So i did that, and it went to the download mode screen, then it gave an error (Regrettably, it went too quick for me to read it), and now it's on the LG logo and has been for maybe 5 minutes, and the notification light is flashing multicolor.
EDIT: YES! I turned it off, since it wasn't doing anything, and i am able to get into download mode! Miracle!
So, is there anything else i need to to, or can i just flash Lollipop to it now, with download mode?

Jtpetch said:
Alrighty, so, progress (?).
I did the procedure with SRKtool, and at the end it told me to unplug it from USB and restart it, So i did that, and it went to the download mode screen, then it gave an error (Regrettably, it went too quick for me to read it), and now it's on the LG logo and has been for maybe 5 minutes, and the notification light is flashing multicolor.
EDIT: YES! I turned it off, since it wasn't doing anything, and i am able to get into download mode! Miracle!
So, is there anything else i need to to, or can i just flash Lollipop to it now, with download mode?
Click to expand...
Click to collapse
am not sure but there isnta kdz for lollipop right? you may need to go to KK KDZ
ooo you have d800 same as me. you need to download this and use the kitkat
Download Installer - KitKat 4.4.2 D80020c
http://forum.xda-developers.com/showthread.php?t=2663369 do that and once you in KITKAT ill tell you
if you need helps just ask

Ah, ok, will do. And thanks so much for all the help!

Jtpetch said:
Ah, ok, will do. And thanks so much for all the help!
Click to expand...
Click to collapse
no problem just hit thanks it i helped, once you in KK ill tell you how to go from there.

Wow, it flashed and everything without a hitch. I'm in KK now, and everything seems all good. So how would I go about upgrading to lollipop?

Thought I'd post back to share the conclusion.
Everything's working perfectly now, I flashed Lollipop through the flash tool, worked perfectly, and now I'm rooted, got a proper TWRP recovery set up, Xposed installed, and everything is good. Seems to run smoother on Lollipop too, and I was skeptical about the battery life, but it seems great

Jtpetch said:
Thought I'd post back to share the conclusion.
Everything's working perfectly now, I flashed Lollipop through the flash tool, worked perfectly, and now I'm rooted, got a proper TWRP recovery set up, Xposed installed, and everything is good. Seems to run smoother on Lollipop too, and I was skeptical about the battery life, but it seems great
Click to expand...
Click to collapse
am glad you liked it, just pass the knowledge when someone is in the same shoes as you were..

i have the same problem as you please help
Jtpetch said:
Alrighty, so, progress (?).
I did the procedure with SRKtool, and at the end it told me to unplug it from USB and restart it, So i did that, and it went to the download mode screen, then it gave an error (Regrettably, it went too quick for me to read it), and now it's on the LG logo and has been for maybe 5 minutes, and the notification light is flashing multicolor.
EDIT: YES! I turned it off, since it wasn't doing anything, and i am able to get into download mode! Miracle!
please guide me through what you did to get back to download
Click to expand...
Click to collapse

[GUIDE] Repair your Idol 3

Hi Everyone
This is Guide how to repair your phone who was dead
My phone doesn't worked for 3 days so i get small trick and successfully repaired from dead
My phone was 5 times not worked like dead,Screen not Works ...only LED works,when i connect to pc usb device not recognized and nothing....
Explanation about my Problem:
IN MY CASE!
and the worst In my case Power button and Volume Buttons doesn't working so i open the BACK COVER eject the cable from volume button and insert small cable in slots to cover the pins like pressing volume up and down and finally connected to pc with usb
So we are starting the GUIDE:
1.First you need the drivers so you can get from this https://drive.google.com/folderview?id=0B1T7tp6tJ_3kX3p6SUxWb2NfWTQ&usp=sharing
2.After you installed the Drivers go to. Download mode if not goes try this... Press Volume UP and Volume DOWN and connect to usb to your pc
3.Go to device Manager to view the Port ,so the port can be "Android HS-USB QDLoader 9008 (COM3)"
4.Download the Panasonic Firmware Eluga and Extract (don't worry this is the same like idol 3 only name changed)https://docs.google.com/uc?id=0B01OmzpKE6vAVDhaSFN2aVFzaVU
5. After Extract you wil find EB-90S55EWLv1009.exe so run as administrator wait to load data
6.select 6045 and in the list down you can find your phone
7.and press the button "download"
8.So process starting ..indetifying your device you will get informations about imei..rooted or no .....
9.so automatically started to flashing the firmware (my it's go to 45 % and then i get error)
10.Don't worry press the button Reboot Device
11.and your device will reboot and you will view 'the screen powered by android and then panasonic so i get message Encrypted device just click the button "reset" and automatically device will be reseted and when wil finish with reset automatically reboots and wait to first boot you will get welcome screen set up and finished.....
12.So device successfully repaired from dead
If you want to go to CM or Stock for Idol 3
-i will write guide to unlock bootloader and flash TWRP recovery
-You must have Minimal Adb and Fastboot
-type "adb reboot-bootloader" to reboot into bootloader. The device should reboot to the screen showing " .powered by android". This is bootloader mode.
-Then type "fastboot -i 0x1bbb devices" should show some numbers and "fastboot" after the numbers
-Type "fastboot -i 0x1bbb oem device-info" shows device info including bootloader status (e.g. locked).
-Type "fastboot -i 0x1bbb oem unlock" to unlock the bootloader; after this you should get, for device info,
-Type "fastboot -i 0x1bbb oem device-info" and you should see "Device unlocked: true"
-You successfully unlocked the bootloader one step more to flash the recovery
-Download the TWRP RECOVERY FROM THIS LINK:
https://www.androidfilehost.com/?fid=24421527759881858
-Then copy from when you downlaod and paste the recovery in C:\Program Files\Minimal ADB and Fastboot
-Press Shift in the directory and click Right on mouse and open command promt here
-Type fastboot -i 0x1bbb flash recovery twrp-3.0.0-1.img or fastboot -i 0x1bbb boot twrp-3.0.0-1.img (if you want to test before installation)
-so successfully installed recovery and flash CM Or whatever you want
[/SIZE][/COLOR][/B]
Sorry for Grammatical Errors!
This guide will repair from dead.... ​

in my case , buttons also doesn't work , how did you opened the back cover?

xZrender said:
in my case , buttons also doesn't work , how did you opened the back cover?
Click to expand...
Click to collapse
here's video how you can open
https://www.youtube.com/watch?v=FrFE8FdTXrY

Alek Dev said:
Hi Everyone
IN MY CASE!
and the worst In my case Power button and Volume Buttons doesn't working so i open the BACK COVER eject the cable from volume button and insert small cable in slots to cover the pins like pressing volume up and down and finally connected to pc with usb​
Click to expand...
Click to collapse
i opened back cover , but how did you press the volume button , it doesnt work for me , i ont know what to do ;/

xZrender said:
i opened back cover , but how did you press the volume button , it doesnt work for me , i ont know what to do ;/
Click to expand...
Click to collapse
Eject cable from motherboatd....insert small cable in slots to cover the pins like pressing volume up and down and finally connected to pc with usb

problem with idol 3 4.7 6039K
Hi there,
I don't know if this is the correct section, I hope so, otherwise I really appreciate you can drive me to the appropriate one, it's new for me this forum!
I have an idol 3 4.7, where I have installed kingroot and after I took out (I didn´t reset the phone, Just unistall the app),
yesterday i received the update system message, I imagine for the marshmallow update, so I say Yes, install it.
But the phone entered in bootloop. I only have the initial screen with the options as Reboot system, adb and so on.
I tried to wipe but nothing. So now my phone stucked. I tried with an assistance center in Quito but they could't
My questions are:
may I use this system for 6039K?
Or does anybody hear about a solution in this case?
Should I open and take out the battery?
Please, any suggestion will be really welcome in order to make the phone work again.
P.

nipozzano said:
Hi there,
I don't know if this is the correct section, I hope so, otherwise I really appreciate you can drive me to the appropriate one, it's new for me this forum!
I have an idol 3 4.7, where I have installed kingroot and after I took out (I didn´t reset the phone, Just unistall the app),
yesterday i received the update system message, I imagine for the marshmallow update, so I say Yes, install it.
But the phone entered in bootloop. I only have the initial screen with the options as Reboot system, adb and so on.
I tried to wipe but nothing. So now my phone stucked. I tried with an assistance center in Quito but they could't
My questions are:
may I use this system for 6039K?
Or does anybody hear about a solution in this case?
Should I open and take out the battery?
Please, any suggestion will be really welcome in order to make the phone work again.
P.
Click to expand...
Click to collapse
Hello
This Guide only works with Idol 3 5.5
but i will explain how to restore your device
Can you try with Mobile upgrade Q to restore,if doesn't work
Use this guide from wiemar ,it should help to you because it's for your model
http://forum.xda-developers.com/showpost.php?p=63709274&postcount=113
If you any questions ask me

Hi ! I follow the guide up to the section 9, unfortunately, in the Panasonic Firmware Eluga and Extract after pressing download it stops after 2% and I have got the error message "load nprg error error code 5002". Does someone know how to fix that ?
Thanks !

Error
I get: "Master Clear: FAIL Flash Status: [COM3->PC[3]] COM3->PC[3] failed to erase misc (Error code = 40016) " :crying:
Now I get the same error that matcail... did you solved it ???

Good tutorial but it does not help me. My phone keeps on rebooting.

Schumi_wk said:
Good tutorial but it does not help me. My phone keeps on rebooting.
Click to expand...
Click to collapse
Tell me info About your phone? Model,Country,ROM...../?

All is standard, no root, no twrp and the latest software from alcatel, the model is 6045Y. But all of a sudden my phone decided to random reboot and it didn't stop
So i looked to unbrick it and came with a couple of options, first i tried to sideload software but that didn't work, than i tried it with Mobile upgrade from alcatel and that didn't work.
Than i saw this thread and tried it twice but after Panasonic and the sound it starts to reboot again. Now i'm trying again with Mobile upgrade.
All that is changed is the recovery interface it looks now like it is from MM.

Schumi_wk said:
All is standard, no root, no twrp and the latest software from alcatel, the model is 6045Y. But all of a sudden my phone decided to random reboot and it didn't stop
So i looked to unbrick it and came with a couple of options, first i tried to sideload software but that didn't work, than i tried it with Mobile upgrade from alcatel and that didn't work.
Than i saw this thread and tried it twice but after Panasonic and the sound it starts to reboot again. Now i'm trying again with Mobile upgrade.
All that is changed is the recovery interface it looks now like it is from MM.
Click to expand...
Click to collapse
More Looks like Hardware Problem Try again with Mobile q if not works...Send to warranty repair.....

Alek, thank you for this great guide. It saved my 6045k model.
I was messing around with AlekOS 3.0, had issues with lock screen and experimented with modems. I managed to permanently disable secondary sim slot (was using famewolf's modem backups). I forgot to copy modem.img backup to my PC! Also tried bunch of TWRP backups with no luck. My last hope was Mobile Upgrade Q and reverting back tu 5.0.2. Unfortunately with no success (only one sim slot is recognized again).
Finally I found this thread, followed the guide and I can confirm that it did solve sim issue. The setup finished with no errors that you mentioned. It got stuck at 45%, but after a while (10min) it completed successfully.
Cheers!

I'm in the same situation as you,but my problem is that Panasonic Eluga doesn't recognice my devide,drivers are correctly installed,I checked everything but nothing:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I´ve tried everything to downgrade my device (Mobile Q doesn't work) but nothing :crying:

peito said:
I'm in the same situation as you,but my problem is that Panasonic Eluga doesn't recognice my devide,drivers are correctly installed,I checked everything but nothing:
I´ve tried everything to downgrade my device (Mobile Q doesn't work) but nothing :crying:
Click to expand...
Click to collapse
You must do something Wrong...Press Pwr button and Volume up and down and thern connect to PC and then you will get RED SCREEN....Press Volume Up until you get Black screen and then press Download and if you get again same Send me Pm with Teamviewer ID AND PASS and i will try to help you

eXoSaX said:
Alek, thank you for this great guide. It saved my 6045k model.
I was messing around with AlekOS 3.0, had issues with lock screen and experimented with modems. I managed to permanently disable secondary sim slot (was using famewolf's modem backups). I forgot to copy modem.img backup to my PC! Also tried bunch of TWRP backups with no luck. My last hope was Mobile Upgrade Q and reverting back tu 5.0.2. Unfortunately with no success (only one sim slot is recognized again).
Finally I found this thread, followed the guide and I can confirm that it did solve sim issue. The setup finished with no errors that you mentioned. It got stuck at 45%, but after a while (10min) it completed successfully.
Cheers!
Click to expand...
Click to collapse
Alek Dev said:
You must do something Wrong...Press Pwr button and Volume up and down and thern connect to PC and then you will get RED SCREEN....Press Volume Up until you get Black screen and then press Download and if you get again same Send me Pm with Teamviewer ID AND PASS and i will try to help you
Click to expand...
Click to collapse
That is exactly what I'm doing,entering in Download mode and then download in the Panasonic software,but nothing,the program cannot read my phone,I'm really tired of trying this,I will stuck in your Alek rom (btw,no matter how many times I flash your modem,I cannot get the lock screen ).Ty anyway Alek and keep it up!!!!

Was on alek 3.0 before bootloop appear after a strange warning on android about battery, now got bootloop, no twrp access etc
try ur solution but after 45% and error, reboot and no screen about panasonic only bootloop
11.and your device will reboot and you will view 'the screen powered by android and then panasonic so i get message Encrypted device just click the button "reset" and automatically device will be reseted and when wil finish with reset automatically reboots and wait to first boot you will get welcome screen set up and finished.....
Click to expand...
Click to collapse
already tried SUGAR+QCT_SP+v10.5.1(4pda source) and mobile upgrade q 5.0.9, both finished without error after 100% but still bootloop
i think it s total broke with motherboard pb or battery

thorfr said:
Was on alek 3.0 before bootloop appear after a strange warning on android about battery, now got bootloop, no twrp access etc
try ur solution but after 45% and error, reboot and no screen about panasonic only bootloop
already tried SUGAR+QCT_SP+v10.5.1(4pda source) and mobile upgrade q 5.0.9, both finished without error after 100% but still bootloop
i think it s total broke with motherboard pb or battery
Click to expand...
Click to collapse
Looks Like Problem With Motherboard and Battery ..you can try again with Panasonic Firmware Tool and if this not help Send it to Warranty Repair

ok i m gonna send it to warr:crying:antly
retry mobil q upgrage wo success bootloop again

Help with invalid IMEI fater rebooting phone?

Hey guys, I'm trying to fix an lg spirit (h440n)
The phone ran out of battery, and later when I charged it and rebooted, I couldn't get any service, and later realized that the IMEI is now invalid and is listen as "unknown" (as well as a couple of other things). Also, for whatever reason the phone takes a much longer time to boot up.
I'd really appreciate if anyone could assist me with restoring the IMEI.
So far I tried doing a factory reset, which didn't help at all (and now for whatever reason the youtube app appears as a generic android icon with the name com.google.android.youtube...etc.)
I do still have the original IMEI cause i saved the box from the phone.
By the way, I'm on android 6.0

kiraqu33n said:
Hey guys, I'm trying to fix an lg spirit (h440n)
The phone ran out of battery, and later when I charged it and rebooted, I couldn't get any service, and later realized that the IMEI is now invalid and is listen as "unknown" (as well as a couple of other things). Also, for whatever reason the phone takes a much longer time to boot up.
I'd really appreciate if anyone could assist me with restoring the IMEI.
So far I tried doing a factory reset, which didn't help at all (and now for whatever reason the youtube app appears as a generic android icon with the name com.google.android.youtube...etc.)
I do still have the original IMEI cause i saved the box from the phone.
By the way, I'm on android 6.0
Click to expand...
Click to collapse
Try to reflash your stock rom with lg flash tool.

mayankjet said:
Try to reflash your stock rom with lg flash tool.
Click to expand...
Click to collapse
Hi,
so I tried doing that, but I keep running into several errors:
1) If I try doing a normal flash using a stock v20b ROM (android 6.0), the flashing software gives me an error saying "Problem with communication between cell phone and PC". It has some instructions on what to do to restart the flashing process, but it still doesn't work for me even if I do them
2) Flashing the v20b ROM with with the CSE flash method, I get an error on the program saying "Required info cannot be found. Contact the system administrator.."
3) Flashing a 10i ROM (android 5) with the CSE method, the flashing process goes to about 9% on the PC, then my phone reboots and for a split second displays an error with all red letters saying "Boot verification Fail!! cause : DIFFERENT_HASH", and after that the phone reboots as normal and the flashing process is once again failed.
I honestly don't understand where the problem is... I hope it's still possible to solve

kiraqu33n said:
Hi,
so I tried doing that, but I keep running into several errors:
1) If I try doing a normal flash using a stock v20b ROM (android 6.0), the flashing software gives me an error saying "Problem with communication between cell phone and PC". It has some instructions on what to do to restart the flashing process, but it still doesn't work for me even if I do them
2) Flashing the v20b ROM with with the CSE flash method, I get an error on the program saying "Required info cannot be found. Contact the system administrator.."
3) Flashing a 10i ROM (android 5) with the CSE method, the flashing process goes to about 9% on the PC, then my phone reboots and for a split second displays an error with all red letters saying "Boot verification Fail!! cause : DIFFERENT_HASH", and after that the phone reboots as normal and the flashing process is once again failed.
I honestly don't understand where the problem is... I hope it's still possible to solve
Click to expand...
Click to collapse
Go to this link
http://techtrickszone.com/2017/12/06/invalid-imei-number-after-flashing-android-phone/
If the above method doesn't work then try to flash lollipop rom with LG UP software as it is possible that the lg support tool could be having trouble flashing the rom.
Also please post a screenshot of the issue.

mayankjet said:
Go to this link
If the above method doesn't work then try to flash lollipop rom with LG UP software as it is possible that the lg support tool could be having trouble flashing the rom.
Also please post a screenshot of the issue.
Click to expand...
Click to collapse
Seems like the method you sent me in the link requires for my LG to be rooted, which I don't think I'll be able to do - none of the one click root methods worked cause android 6.0 seems to have fixed the exploit those programs use, and doing it manually might also be troublesome cause I can't get the download mode to work with the phone.(Like I mentioned, the error "Boot verification Fail!! cause : DIFFERENT_HASH"). Sorry, I'm not able to post an image of the error cause I'm still a new user on the forums...
So I think LGUP might be my only hope at this point, but I can't get it to recognize my phone. It just shows up as an unknown device and I can't proceed with the flashing process

kiraqu33n said:
Hey guys, I'm trying to fix an lg spirit (h440n)
The phone ran out of battery, and later when I charged it and rebooted, I couldn't get any service, and later realized that the IMEI is now invalid and is listen as "unknown" (as well as a couple of other things). Also, for whatever reason the phone takes a much longer time to boot up.
I'd really appreciate if anyone could assist me with restoring the IMEI.
So far I tried doing a factory reset, which didn't help at all (and now for whatever reason the youtube app appears as a generic android icon with the name com.google.android.youtube...etc.)
I do still have the original IMEI cause i saved the box from the phone.
By the way, I'm on android 6.0
Click to expand...
Click to collapse
Go to this link:
https://lg-kdz-firmware.com/check-your-firmware.html
Open your phone from the back and remove the battery, then you will find the IMEI, write it on that site that i put a link to and you can find the right firmware for your phone, download it, download lg drivers (search on google for them) and install them, then try flashing with LG Flash Tool 2014, and make settings to be like this:
Select Type: CDMA,
PhoneMode: CS_EMERGENCY
and flash with CSE Flash.
To go in download mode turn off your phone and hold the volume down button while holding enter the usb cable in to the phone but it should previously be connected to the pc, hold volume down button until you sea a screen that shows you that you are in download mode than start the tool from your pc and flash the firmware.
Hope this helps.

Tin40 said:
Go to this link:
https://lg-kdz-firmware.com/check-your-firmware.html
Open your phone from the back and remove the battery, then you will find the IMEI, write it on that site that i put a link to and you can find the right firmware for your phone, download it, download lg drivers (search on google for them) and install them, then try flashing with LG Flash Tool 2014, and make settings to be like this:
Select Type: CDMA,
PhoneMode: CS_EMERGENCY
and flash with CSE Flash.
To go in download mode turn off your phone and hold the volume down button while holding enter the usb cable in to the phone but it should previously be connected to the pc, hold volume down button until you sea a screen that shows you that you are in download mode than start the tool from your pc and flash the firmware.
Hope this helps.
Click to expand...
Click to collapse
Hi, I can't get my phone into download mode, the phone displays an error: "Boot verification Fail!! cause : DIFFERENT_HASH", and just reboots like normal and the flashing process ends up failing... I guess the download mode on my phone is somehow broken, though I can't find any way to fix it

kiraqu33n said:
Hi, I can't get my phone into download mode, the phone displays an error: "Boot verification Fail!! cause : DIFFERENT_HASH", and just reboots like normal and the flashing process ends up failing... I guess the download mode on my phone is somehow broken, though I can't find any way to fix it
Click to expand...
Click to collapse
To enter download mode phone must be turned off then press and hold vol. Up button then plug in the usb cable. It is not the volume down button.
If Lg Up recognizes your phone as unknown device that's normal as it has happened to me as well. See if you can enter in download mode with keys, if you can't, just keep your phone booted into rom then start flashing lollipop kdz and your phone should automatically boot into download mode.

On my LG Spirit 4G LTE h440n is the volume down button. The volume up is to go into the bootloader.

mayankjet said:
To enter download mode phone must be turned off then press and hold vol. Up button then plug in the usb cable. It is not the volume down button.
If Lg Up recognizes your phone as unknown device that's normal as it has happened to me as well. See if you can enter in download mode with keys, if you can't, just keep your phone booted into rom then start flashing lollipop kdz and your phone should automatically boot into download mode.
Click to expand...
Click to collapse
In LGUP when my phone shows up as "unknown", I can't do the flashing process cause the program just says "You have to select a known model, please."
Edit: here is a screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And about download mode, I know how to get into it, and it is indeed volume up+usb, but like I said, when I enter download mode it just displays that error message about boot verification failed, and the phone just reboots as normal. I thought maybe I'm not explaining it well enough so instead I filmed a video: https://www.youtube.com/watch?v=APlsn5gVvzw&feature=youtu.be

kiraqu33n said:
In LGUP when my phone shows up as "unknown", I can't do the flashing process cause the program just says "You have to select a known model, please."
Edit: here is a screenshot
And about download mode, I know how to get into it, and it is indeed volume up+usb, but like I said, when I enter download mode it just displays that error message about boot verification failed, and the phone just reboots as normal. I thought maybe I'm not explaining it well enough so instead I filmed a video:
&feature=youtu.be
Click to expand...
Click to collapse
Take a look at this thread.
https://forum.xda-developers.com/g-flex2/help/lgup-unknown-device-t3403402

mayankjet said:
Take a look at this thread.
https://forum.xda-developers.com/g-flex2/help/lgup-unknown-device-t3403402
Click to expand...
Click to collapse
Tried everything in that thread, but sadly the result is still the same. I also followed a tutorial in this thread https://forum.xda-developers.com/lg-spirit/how-to/how-to-install-marshmallow-lg-spirit-t3490045 but my phone is still not recognized by LGUP. I'm certain I followed the instructions correctly

kiraqu33n said:
Tried everything in that thread, but sadly the result is still the same. I also followed a tutorial in this thread https://forum.xda-developers.com/lg-spirit/how-to/how-to-install-marshmallow-lg-spirit-t3490045 but my phone is still not recognized by LGUP. I'm certain I followed the instructions correctly
Click to expand...
Click to collapse
Sorry then as i can't think of anything else. If your phone is still under warranty period you can always send it to service center.

mayankjet said:
Sorry then as i can't think of anything else. If your phone is still under warranty period you can always send it to service center.
Click to expand...
Click to collapse
Ahh that's too bad. Well, thank you for your help either way! Sadly, the phone isn't covered by warranty anymore..
I think my best bet is to make the download mode work correctly. I guess I will have to keep searching

I have an LG Spirit 4G (H440n) that lost its IMEI a month ago after shutting down because of a drained battery. After turning it on, the SIM card never got read and the IMEI was unknown. Following a lot of hurdles to reflash a .kdz from download mode I managed to flash a MM firmware and the phone rebooted with its IMEI intact. Then, after a while the phone shut down with a drained battery and the same thing happened. I reflashed and fixed it.
After that... Yeah, the phone shut down after a battery drain and now it doesn't have its IMEI again. Is there any way to restore it and keep there for good without reflashing the whole device from download mode? What could be causing? Should I watch out for the battery forever now?

hitmancho said:
I have an LG Spirit 4G (H440n) that lost its IMEI a month ago after shutting down because of a drained battery. After turning it on, the SIM card never got read and the IMEI was unknown. Following a lot of hurdles to reflash a .kdz from download mode I managed to flash a MM firmware and the phone rebooted with its IMEI intact. Then, after a while the phone shut down with a drained battery and the same thing happened. I reflashed and fixed it.
After that... Yeah, the phone shut down after a battery drain and now it doesn't have its IMEI again. Is there any way to restore it and keep there for good without reflashing the whole device from download mode? What could be causing? Should I watch out for the battery forever now?
Click to expand...
Click to collapse
Wow this really is strange. Just to be clear, this phone I was trying to fix was being used by my dad, not me, and he also said the problems started happening after his battery got drained. Unlike you, however, I never managed to even flash a stock ROM to the phone, cause for me the download mode still doesn't work.
Any LG gurus out there know what's going on with these phones?

I can't post links on threads but i found a video, not sure if it helps or if it works but you got nothing to lose, PM me and i'll send you the link.

[SOLVED] Bricked after an UPDATE or HARD RESET (can not get into recovery mode)

UPDATE: The issue was resolved and here is the [SOLUTION]​first of all lets start with the problem, it doesn't matter if it's just hard reset loop or update loop problem, I actually did both, here's a thing this main issue comes with updates but somehow this time recovery mode was completely destroyed, so there is no escape you can only access fastboot which is a good thing in a way, follow the steps to unbrick your phone.
-if you can access recovery mode just download modified miflashpro and flash downloaded rom using it.
REQUIRMENTS: PC,USB CABLE,INTERNET CONNECTION.
SOLUTION:​1. Install ADB on your PC with all the necessary drivers for your phone
2. Turn off your phone completely, press and hold volume down and power button together to go into fastboot mode
3. once you are in fastboot mode connect usb to phone and open cmd from adb directory and type in: fastboot devices (if device serial number is shown in fastboot mode everything is good so far... if not go to DEVICE MANAGER in your pc and check if driver is installed properly if anything ADB drivers and ANDROID USB drivers will come handy to install them manually)
4. now type in: fastboot continue
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. your device will boot into system if it fails try going into fastboot mode and going with fastboot continue command again try until it boot ups into safe mode
6. eventually it will boot into safe mode system without your files being touched because nor update nor hard reset was completed fully, phone will be in airplane mode.
7. DO NOT TURN ON WIFI OR MOBILE DATA it will crash your phone, if your phone storage is full remove some stuff plus the apps.
8. Turn on USB DEBUGGING,OEM UNLOCK MODE. open file transfers and download apk of MIUI updater from pc to your phone ( LATEST VERSION ) and install it.
9. now DEACTIVATE AIRPLANE MODE and turn on WIFI FROM SETTINGS
10. once you got internet connection wait a little bit for all of the notifications and stuff to pop up be careful, once it's all good go to settings about phone and system update and CHECK FOR UPDATES
11. let your phone download the update it should be around 1.7GB depends honestly let it decrypt and once you are ready click on INSTALL NOW.
12. it will take time to install and reboot will happen many time you might think that it gets stuck at 90.49% but let it finish be patient it happens it just needs time, once everything is done you are good to go
WELCOME TO MIUI 12
SIDE NOTE:
I - MAKE SURE YOUR PHONE IS CHARGED
II - I DID TRY EDL TEST POINTS BUT YOU DO NOT NEED TO OPEN UP YOUR PHONE NOR TO DO IT.
III - BE PATIENT

F
Unless you're willing to do a test point boot, take it to a Xiaomi service center, take a receipt with you or some proof of purchase.
You can try buying an EDL cable and testing your luck, I highly doubt tho since Xiaomi locks it's EDL mode.

got good news I managed to actually get in the system
using fastboot continue command it lags as hell but usb debugging is on
so from the looks of it recovery is gone
I am in phone adb devices are visible
anything that you might suggest ?

it took me three times to do this but it finally managed to do something

I think it's safe mode and this is why it's not crashing yet

XDHx86 said:
F
Unless you're willing to do a test point boot, take it to a Xiaomi service center, take a receipt with you or some proof of purchase.
You can try buying an EDL cable and testing your luck, I highly doubt tho since Xiaomi locks it's EDL mode.
Click to expand...
Click to collapse
anyways phone is on and going well charging but is in airplane mode trying to flash rom using miflash but not working... recovery is most likely gone... any ideas guys what to do?

Update:turning wifi makes it crash
UPDATE II: WHATEVER HAPPENS DO NOT TURN ON WIFI IT WILL CRASH AND KEEP ON CRASHING UNTIL YOU GET LUCKY AND TURN IT OFF YOURSELF
UPDATE THREE: I NEED A WAY TO FLASH RECOVERY WITHOUT FASTBOOT AND BOOTLOADER IS LOCKED

You said your device is locked? If it's unlocked try flashing TWRP, and flashing a different ROM so this doesn't happen again.
Careful of rollback index when trying to flash a MIUI ROM so it doesn't cause a hardbrick.

XDHx86 said:
You said your device is locked? If it's unlocked try flashing TWRP, and flashing a different ROM so this doesn't happen again.
Careful of rollback index when trying to flash a MIUI ROM so it doesn't cause a hardbrick.
Click to expand...
Click to collapse
I mean device is locked... there is no way to unlock it with that MI account BS
is there a way to flash twrp?

XDHx86 said:
You said your device is locked? If it's unlocked try flashing TWRP, and flashing a different ROM so this doesn't happen again.
Careful of rollback index when trying to flash a MIUI ROM so it doesn't cause a hardbrick.
Click to expand...
Click to collapse
If i somehow manage to get into recovery even if I will be able to install it I will flash rom and it's over

You can't force flash TWRP. You'll have to wait those days with MI Unlock, that's the only way.
There is this thread about an unofficial method of unlocking, I didn't bother looking tbh since I'm very sure you can't unlock it unofficially, but if you do find something then do it on your own risk.

good news managed to get wifi to work now trying to download update from the phone it's slowly going lets see if it installs safely this time boyz will update

gotta admit was a rough one

NikoWulf said:
good news managed to get wifi to work now trying to download update from the phone it's slowly going lets see if it installs safely this time boyz will update
Click to expand...
Click to collapse
NikoWulf said:
View attachment 5248941 gotta admit was a rough one
Click to expand...
Click to collapse
Well that's good, I've never heard a Xiaomi update bricking a phone except MI A3 recent Android 11 update. So most likely it will work fine. Make sure you have enough charge in the battery.
Gotta ask, how did you fix it? Did you do a test point?

well it's not over yet my dude,lets see how it's going to update this one hopefully everything will work fine
well I did had to use test points for nothing lmao, plus tweaking with right drivers from device manager and stuff...
well lets hope it works out... it was a nightmare bud

XDHx86 said:
Well that's good, I've never heard a Xiaomi update bricking a phone except MI A3 recent Android 11 update. So most likely it will work fine. Make sure you have enough charge in the battery.
Gotta ask, how did you fix it? Did you do a test point?
Click to expand...
Click to collapse
well I can't leave it like that until the update cause I can see it's buggy plus I removed SIM
so airplane mode was deactivated
activated Wifi it works pretty decent rn laggy a bit but at least I am able to download so lets see where will this update take me

been stuck here for a while now

BOYS phone turned on without a problem ladies and gentleman
PROBLEM IS SOLVED

NikoWulf said:
well I can't leave it like that until the update cause I can see it's buggy plus I removed SIM
so airplane mode was deactivated
activated Wifi it works pretty decent rn laggy a bit but at least I am able to download so lets see where will this update take me
Click to expand...
Click to collapse
Well I know I'd want a way out of this fast, so if you're still looking for a way to flash another ROM I think Hydra tool can unlock bootloader through EDL mode.
NikoWulf said:
BOYS phone turned on without a problem ladies and gentleman
PROBLEM IS SOLVED
Click to expand...
Click to collapse
Although if everything is working fine then I advice against it.

XDHx86 said:
Well I know I'd want a way out of this fast, so if you're still looking for a way to flash another ROM I think Hydra tool can unlock bootloader through EDL mode.
Although if everything is working fine then I advice against it.
Click to expand...
Click to collapse
Thanks might try it out if this one gets funky again but so far everything is going smooth