Database Users

Nexus 10 does not boot after Update

After attempt at installing software update to Nexus 10 tablet will not boot. Have wiped Cache and even then did a factory reset. Nothing. Google appears and then twirling colorful dots and nothing. For hours just twirling dots., Samsung and Google and Best Buy geeks says nothing they can do. No longer under warranty but very upset since tablet was working great until update. I am not very tech savvy but can anyone help or do I just have a new paperweight? Thanks for any advice.
I have not made any modifications to the tablet.

Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images

yes flash the newest image

After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?

VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
Gibbothegreat said:
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
Click to expand...
Click to collapse
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx

Khaon said:
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Click to expand...
Click to collapse
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?

same problem
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
as a newbie .I'm not allowed to reference your link !!
I rooted my nexus 10 using xda instructions., installed CWM. All good. I tried backup and recovery and screwed something up in recovery. Got stuck in recovery mode reboot loop. Many gyrations, no fix, so I tried factory reset. Still no fix.
I decided to install a new version of the OS using the Mantaray tar you reference above. UBS connecting and fastboot. All messages look good. Now I have the problem reported in this thread. Stuck with flying balls and no boot. Very interested in any suggestions you may have.
Click to expand...
Click to collapse

Gibbothegreat said:
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
Click to expand...
Click to collapse
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.

Khaon said:
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Click to expand...
Click to collapse
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.

Gibbothegreat said:
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Click to expand...
Click to collapse
Oh I see, well, you should just flash a custom ROM or if you want to stay with official factory images, you should just follow instruction there:
https://developers.google.com/android/nexus/images
What you do need is just have fastboot executable once you are into the bootloader.
You can easily access the bootloader from twrp : shutdown > reboot into booatloader

Cool thx for your continued help :good:

The problem is due to your attempting an OTA update with a custom recovery (TWRP). You can only do OTA with stock recovery. Once you are in this situation, your easiest way out of it is to simply apply the latest factory image using "fastboot", but this will also wipe your user data so backup any photos, music, etc. before you start. You will also have to reload programs from Playstore once the new image is installed.

Wrongly installed TWRP 3.0. 2-0

I was running on an older version of TWRP. Also I had uprooted my phone recently due to battery heating and media server issue. I flashed the new zip file but did not clear cache after flashing instead directly booted into system. System boots perfectly but cannot load recovery as it gets stuck on splash screen( Lenovo logo). Please do help me.

Flash it back to older twrp version using fastboot.

Guys, hi
There is one more new problem. I tried to update the OTA update but got stuck at boot screen. It's not responding after the Lenovo logo. I think the issue is not having any recovery(custom nor stock). How to fix this issue? Please help me to
# Reset stock recovery or TWRP 3.0.2-0
# Update the OTA update( I badly want this as I saw that Resurrection Remix requires the device to presently run on stock Lollipop to update. I soo badly want to use CM13

Iamjomy said:
I was running on an older version of TWRP. Also I had uprooted my phone recently due to battery heating and media server issue. I flashed the new zip file but did not clear cache after flashing instead directly booted into system. System boots perfectly but cannot load recovery as it gets stuck on splash screen( Lenovo logo). Please do help me.
Click to expand...
Click to collapse
Use cwm ...its working 100% sure

ANDROiDCO said:
Flash it back to older twrp version using fastboot.
Click to expand...
Click to collapse
Thank you. But can you please tell how to do this via the flash boot. I haven't tried yet in a PC. I installed the older TWRP and now tried flashing the new version using my phone. Wouldn't I get stuck because none of the recoveries(custom and stock) are opening

can you boot into the system? if Yes then use rashr app and flash twrp's img file from the storage.. and reboot to recovery and u don't need to update to stock lollipop you can directly flash cm12.1 by ed300 and after booting into system once you can install any lollipop or marshmallow rom with the help of recovery. i advice you to not to do update as u r a root user.

varun4495 said:
can you boot into the system? if Yes then use rashr app and flash twrp's img file from the storage.. and reboot to recovery and u don't need to update to stock lollipop you can directly flash cm12.1 by ed300 and after booting into system once you can install any lollipop or marshmallow rom with the help of recovery. i advice you to not to do update as u r a root user.
Click to expand...
Click to collapse
Thank you bro. Yes I can boot into system. Actually I'm not root user anymore. I had heating issues with the battery earlier. After rooting media server started draining battery. So i uninstalled SuperSU.

Iamjomy said:
Thank you bro. Yes I can boot into system. Actually I'm not root user anymore. I had heating issues with the battery earlier. After rooting media server started draining battery. So i uninstalled SuperSU.
Click to expand...
Click to collapse
You first hv to root for the installation of recovery.. First root ur phone then install stock recovery.. Using flashify or rashr.

If you can boot into system, then you can use adb sideload to flash zips(recovery or rom).
For detailed info, google it or go to http://www.droidviews.com/sideload-roms-mods-using-adb-sideload/
If it doesn't work, root your phone and then install flashfire. Then use it to flash recovery.

varun4495 said:
You first hv to root for the installation of recovery.. First root ur phone then install stock recovery.. Using flashify or rashr.
Click to expand...
Click to collapse
Thanks bro. Is it bad to root using iRoot or KingRoot? Or should I do it using ADB?

@Iamjomy if you have pc then go for adb otherwise go for the latest version of kingoroot.. I rooted with kingroot.. No problem in that.. You can find that apk by searching on google.. !!

varun4495 said:
@Iamjomy if you have pc then go for adb otherwise go for the latest version of kingoroot.. I rooted with kingroot.. No problem in that.. You can find that apk by searching on google.. !!
Click to expand...
Click to collapse
Hello,
Thank you soo much. I flashed TWRP 2.8 using Flashify and it works. Actually I wanted to do a factory reset to solve "Unfortunately the process com.android.phone has stopped" issue. It wasn't allowing me to turn on my mobile data. I couldn't reset the phone too as a recovery was missing. Now the issue is fixed and I'm happy with it. Can I flash the TWRP 3.0.2-0 similarly using Flashify? Also please do suggest some good ROMS bro. Im still on the KitKat version( S040_150805)

Iamjomy said:
Hello,
Thank you soo much. I flashed TWRP 2.8 using Flashify and it works. Actually I wanted to do a factory reset to solve "Unfortunately the process com.android.phone has stopped" issue. It wasn't allowing me to turn on my mobile data. I couldn't reset the phone too as a recovery was missing. Now the issue is fixed and I'm happy with it. Can I flash the TWRP 3.0.2-0 similarly using Flashify? Also please do suggest some good ROMS bro. Im still on the KitKat version( S040_150805)
Click to expand...
Click to collapse
Recovery version are depended on the different andtoid versions.. 3.0.2 is for the LP and MM.. If u use custom roms then u can use that.. I dnt suggest you to use that as u r on the lollipop.. And the best roms are.. CM12.1, RR5.7.3, MOKEE, XOSP.. press thanks if i helped you. !!

Axon 7 root help!!!

I tried to root my Axon 7 using the "Axon7toolkit" method and everyting looked like it was going well, installed twrp and unlocked bootloader with fastboot but now it get stuck at the splash screen where it says wait 5sec but it never moves from that screen. when I go into twrp I cannot install anything i get failed error 7 everytime. this is about the 3rd phone i have rooted and i don't know what to do from here... any help would be appreciated, I have the a2017u model which was running the lastest nougat

Which rom are you trying to flash?

JKSurf said:
Which rom are you trying to flash?
Click to expand...
Click to collapse
lineage os 14

i figured it out, thanks for help

jjallday said:
i figured it out, thanks for help
Click to expand...
Click to collapse
Old TWRP, right?

Probably wrong bootstack

Choose an username... said:
Old TWRP, right?
Click to expand...
Click to collapse
idk how the problem occured I followed the root instructions perfectly . I had the latest twrp out so couldn't have been that. os was missing and nothing i tried could get it back installed, so following more instructions led me to downgrade the twrp and install b29 stock then i just did the whole root process over following the same instructions that sent the phone into a loop but this time everything worked correctly. i updated twrp and installed super su and now i have full root. axon7toolkit provided majority of the tools needed.

Cannot get TWRP on Oreo, only on Nougat, phone keeps rebooting.

Hi,
I have a S8+, SM-G955F and I cannot have Android Oreo and TWRP (and then root). I only can have Android 7 and TWRP (and then root).
Current situation is: I have Android Oreo, Build G955FXXU1CRB7 is installed. Once I go to Download Mode and flash TWRP, I can boot into TWRP, but my device is not booting into Android anymore. It starts up, shows me the Samsung logo and reboots, then it shows samsung logo again and reboots.
It reboots and reboot and reboots...If I go to TWRP and make a factory reset or format data, it does not help, it only reboots when trying to start Android.
Even if I restore an older backup of boot, systems partition, it does not work...
So what do I do? I flash original Android Oreo firmware once again via Odin and get it back working, but: I loose TWRP again (and cannot flash SuperSU).
Any idea? I would like to have latest Oreo as well as TWRP recovery
Many thanks!

tobyffm said:
Hi,
I have a S8+, SM-G955F and I cannot have Android Oreo and TWRP (and then root). I only can have Android 7 and TWRP (and then root).
Current situation is: I have Android Oreo, Build G955FXXU1CRB7 is installed. Once I go to Download Mode and flash TWRP, I can boot into TWRP, but my device is not booting into Android anymore. It starts up, shows me the Samsung logo and reboots, then it shows samsung logo again and reboots.
It reboots and reboot and reboots...If I go to TWRP and make a factory reset or format data, it does not help, it only reboots when trying to start Android.
Even if I restore an older backup of boot, systems partition, it does not work...
So what do I do? I flash original Android Oreo firmware once again via Odin and get it back working, but: I loose TWRP again (and cannot flash SuperSU).
Any idea? I would like to have latest Oreo as well as TWRP recovery
Many thanks!
Click to expand...
Click to collapse
Hello, which instructions did you follow to flash again the firmware? ( i assume the firmware was the official )

StonebridgeGr said:
Hello, which instructions did you follow to flash again the firmware? ( i assume the firmware was the official )
Click to expand...
Click to collapse
Yes, it was the official one. Just searched the site, but cannot find it anymore. However, flashing the firmware does not need many steps. DOwnload the zip, extract the .tar files in it, open ODIN, load .tar files into Odin and click flash. Then it was flashed and Android was booting again.

tobyffm said:
Yes, it was the official one. Just searched the site, but cannot find it anymore. However, flashing the firmware does not need many steps. DOwnload the zip, extract the .tar files in it, open ODIN, load .tar files into Odin and click flash. Then it was flashed and Android was booting again.
Click to expand...
Click to collapse
you are right, when you flashed the official firmware, on odin did you select the Home_CSC or the CSC ?

StonebridgeGr said:
you are right, when you flashed the official firmware, on odin did you select the Home_CSC or the CSC ?
Click to expand...
Click to collapse
I think it was the CSC, but as far as I remember, I also tried the HOME_CSC in the past (not today) but the behaviour was also the same.
As far as I know difference is that with one of these files internal storage is wiped, with the other one it isn't, correct?
But what could this have to do that I get a restart-loop when flashing TWRP? I dont have a problem to flash original firmware, it works. But once I flash TWRP I cannot start Android anymore and have to reflash Android firmware again.

tobyffm said:
I think it was the CSC, but as far as I remember, I also tried the HOME_CSC in the past (not today) but the behaviour was also the same.
As far as I know difference is that with one of these files internal storage is wiped, with the other one it isn't, correct?
But what could this have to do that I get a restart-loop when flashing TWRP? I dont have a problem to flash original firmware, it works. But once I flash TWRP I cannot start Android anymore and have to reflash Android firmware again.
Click to expand...
Click to collapse
which guide did you follow to flash TWRP?
also yes the CSC not the HOME CSC wipes the internal storage

StonebridgeGr said:
which guide did you follow to flash TWRP?
also yes the CSC not the HOME CSC wipes the internal storage
Click to expand...
Click to collapse
I followed this guide: https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-install-twrp-root-galaxy-t3752480
But also not much to follow...Download correct TWRP for S8+, load into Odin and click flash. TWRP is correct version and it works for me. But at same time, phone is not booting into Android anymore. This is why I end in reflashing original Android firmware again. I am in a loop :silly:

tobyffm said:
I followed this guide: https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-install-twrp-root-galaxy-t3752480
But also not much to follow...Download correct TWRP for S8+, load into Odin and click flash. TWRP is correct version and it works for me. But at same time, phone is not booting into Android anymore. This is why I end in reflashing original Android firmware again. I am in a loop :silly:
Click to expand...
Click to collapse
Dude thats guide to flash and root S8 not S8+.. thats why you get bootloop, make sure to follow the correct guide next time
Here is the best guide i found for you https://www.androidinfotech.com/2018/02/root-samsung-galaxy-s8-plus-sm-g955f-oreo.html

StonebridgeGr said:
Dude thats guide to flash and root S8 not S8+.. thats why you get bootloop, make sure to follow the correct guide next time
Here is the best guide i found for you https://droidfeats.com/root-galaxy-s8-plus-variants-android-8-0-oreo-cf-auto-root/
Click to expand...
Click to collapse
thanks, but I dont think so.
From the thread I mentioned, yes, I can download TWRP for S8, not S8+, but I went to TWRP site and downloaded correct TWRP for my device. Loading into odin and flash is the same, doesnt matter which device I have.
CF Autoroot does not work for me as it is not available for Oreo firmware. I checked all this previously, I am not a that stupid guy :laugh:

tobyffm said:
thanks, but I dont think so.
From the thread I mentioned, yes, I can download TWRP for S8, not S8+, but I went to TWRP site and downloaded correct TWRP for my device. Loading into odin and flash is the same, doesnt matter which device I have.
CF Autoroot does not work for me as it is not available for Oreo firmware. I checked all this previously, I am not a that stupid guy :laugh:
Click to expand...
Click to collapse
then follow this guide, i am sure you did a wrong on the instructions, follow then without stress and do not rush . I never said you a stupid guy
https://androidjungles.com/root-samsung-galaxy-s8-plus-install-twrp-recovery-android-oreo-sm-g955f/
Download this TWRP image for your S8PLUS(twrp-3.2.1-0-dream2lte.img.tar 38.2M 2017-12-09 03:01:59 ES)
https://dl.twrp.me/dream2lte/

StonebridgeGr said:
then follow this guide, i am sure you did a wrong on the instructions, follow then without stress and do not rush . I never said you a stupid guy
https://androidjungles.com/root-samsung-galaxy-s8-plus-install-twrp-recovery-android-oreo-sm-g955f/
Download this TWRP image for your S8PLUS(twrp-3.2.1-0-dream2lte.img.tar 38.2M 2017-12-09 03:01:59 ES)
https://dl.twrp.me/dream2lte/
Click to expand...
Click to collapse
I used exactly that TWRP version today.
The only difference between my steps and the steps mentioned in your mentioned guide is that they use an older Odin version. But I already used different Odin version too
Ok, aynway, I will try it again with this guide tomorrow and will let you know about the result tomorrow. Thx so far

tobyffm said:
I used exactly that TWRP version today.
The only difference between my steps and the steps mentioned in your mentioned guide is that they use an older Odin version. But I already used different Odin version too
Ok, aynway, I will try it again with this guide tomorrow and will let you know about the result tomorrow. Thx so far
Click to expand...
Click to collapse
alright i will be waiting for you reply to my post here !!

StonebridgeGr said:
alright i will be waiting for you reply to my post here !!
Click to expand...
Click to collapse
Hi again,
I got an OTA Update this morning, so current build on phone was G955FXXU1CRC7.
I now downloaded the TWRP file you mentioned and followed the guide you mentioned.
TWRP was installed using latest Odin Version 3.13, then I tried to install SuperSU, but this failed, red error messages like failed to mount /data, unable to mount storage.
same for factory reset, does not work. I formated data, it worked. then I installed Super Su, it was possible. then I rebooted device and what shall I say, it booted into Android
Dont know what I did different now, maybe not trying to boot up Android before installing supersu.zip?
However, Now I have latest Oreo with TWRP and phone is rooted
Now I will go on and install xposed framework :good:
Many thanks for your help.

tobyffm said:
Hi again,
I got an OTA Update this morning, so current build on phone was G955FXXU1CRC7.
I now downloaded the TWRP file you mentioned and followed the guide you mentioned.
TWRP was installed using latest Odin Version 3.13, then I tried to install SuperSU, but this failed, red error messages like failed to mount /data, unable to mount storage.
same for factory reset, does not work. I formated data, it worked. then I installed Super Su, it was possible. then I rebooted device and what shall I say, it booted into Android
Dont know what I did different now, maybe not trying to boot up Android before installing supersu.zip?
However, Now I have latest Oreo with TWRP and phone is rooted
Now I will go on and install xposed framework :good:
Many thanks for your help.
Click to expand...
Click to collapse
Update: Just tried to flöash xposed framework via TWRP but it fails because of unable to mount data. Do you know why this appears?

tobyffm said:
Update: Just tried to flöash xposed framework via TWRP but it fails because of unable to mount data. Do you know why this appears?
Click to expand...
Click to collapse
Hello dude, u are gonna need to flash dm-verity 5.1 find it on google , flash it and then flash immediately flash Xposed , if the error appear again then format data, and there is a option to wipe cache and Data, wipe them too, flash dm-verity and flash immediately the Xposed, if I helped you please press thanks buttons

StonebridgeGr said:
Hello dude, u are gonna need to flash dm-verity 5.1 find it on google , flash it and then flash immediately flash Xposed , if the error appear again then format data, and there is a option to wipe cache and Data, wipe them too, flash dm-verity and flash immediately the Xposed, if I helped you please press thanks buttons
Click to expand...
Click to collapse
Hi,
I had to format data, then I wiped Cache and Data again. Tehn, I flashed dm-verity, directly after that SuperSU again and directly aafter this I flashed xposed.
Finally, all works
Many thanks for your kind help!

tobyffm said:
Hi,
I had to format data, then I wiped Cache and Data again. Tehn, I flashed dm-verity, directly after that SuperSU again and directly aafter this I flashed xposed.
Finally, all works
Many thanks for your kind help!
Click to expand...
Click to collapse
I told you you were missing something with the instructions, I am happy now everything is fine

Samsung Galaxy J730F Touch not working android 9

Hello, i have a problem with my phone , i don t know if the screen was replaced or not because i bought it used. I had android 7 and now i have android 9 , i didnt use the phone for a long time and now i did turn it on saw updates from 7 to 8.1 and then the touch stopped working so i saw there is an update from 8.1 to 9 and did that to (with a mouse and otg) but still nothing.
Main problems:
-touch screen still not working
-bootloader binary 5(so i can t downgrade to android 7)
Any ideas how to downgrade or any fix for the touch on android 9?
Thanks

BlackMist21 said:
Hello, i have a problem with my phone , i don t know if the screen was replaced or not because i bought it used. I had android 7 and now i have android 9 , i didnt use the phone for a long time and now i did turn it on saw updates from 7 to 8.1 and then the touch stopped working so i saw there is an update from 8.1 to 9 and did that to (with a mouse and otg) but still nothing.
Main problems:
-touch screen still not working
-bootloader binary 5(so i can t downgrade to android 7)
Any ideas how to downgrade or any fix for the touch on android 9?
Thanks
Click to expand...
Click to collapse
Usually Samsung bootloaders are backwards compatible, so you may still be able to downgrade.
You could also just try using the touch screen binaries from Android 7.

ashyx said:
Usually Samsung bootloaders are backwards compatible, so you may still be able to downgrade.
You could also just try using the touch screen binaries from Android 7.
Click to expand...
Click to collapse
Tried and it always come an error of bootloader 5 and the one i try to install is 4,
I used odin usual steps is there any other way?

BlackMist21 said:
Tried and it always come an error of bootloader 5 and the one i try to install is 4,
I used odin usual steps is there any other way?
Click to expand...
Click to collapse
Which parts are you attempting to install?
Just don't flash the bootloader.

ashyx said:
Which parts are you attempting to install?
Just don't flash the bootloader.
Click to expand...
Click to collapse
So you say i should try like this
From android 9 to android 8.1 with odin i should load only ap/cp/csc and for bl ?should i let it empty or add the one from android 9?
so i tried adding cp,cp,csc with empty bl doesnt even start, i tried with cp,ap,csc from 8.1 and bl from 9 it gave me error your binary 3 and using binary 2? wth?
can you help me thkx

BlackMist21 said:
So you say i should try like this
From android 9 to android 8.1 with odin i should load only ap/cp/csc and for bl ?should i let it empty or add the one from android 9?
so i tried adding cp,cp,csc with empty bl doesnt even start, i tried with cp,ap,csc from 8.1 and bl from 9 it gave me error your binary 3 and using binary 2? wth?
can you help me thkx
Click to expand...
Click to collapse
Just flash ap only. Be aware you will also need to factory reset, so make sure you are oem unlocked.

Kernel rev check fail 3 binary 2

BlackMist21 said:
Kernel rev check fail 3 binary 2
Click to expand...
Click to collapse
All I can suggest is Install twrp and flash the kernel with that.
However you will need to pull out the boot.img from the AP tar file.

What kernel should i flash and ap? 8.1 o 7?

BlackMist21 said:
What kernel should i flash and ap? 8.1 o 7?
Click to expand...
Click to collapse
Basically you need to remove the boot.img from the AP tar archive then install the rest of the AP file without the boot.img using ODIN.
Then install twrp and flash the boot.img.
Format data and reboot.

ashyx said:
Basically you need to remove the boot.img from the AP tar archive then install the rest of the AP file without the boot.img using ODIN.
Then install twrp and flash the boot.img.
Format data and reboot.
Click to expand...
Click to collapse
i didnt tried that yet, but if i try are chances that o brick my phone?
if it will work after format and reboot i can put custom rom like prometheus and will fix my problem?
thanks and sorry for bothering you

BlackMist21 said:
i didnt tried that yet, but if i try are chances that o brick my phone?
if it will work after format and reboot i can put custom rom like prometheus and will fix my problem?
thanks and sorry for bothering you
Click to expand...
Click to collapse
There's a chance It may soft brick it. However soft bricks are fully recoverable by simply flashing the stock firmware or just restoring a backup.

thanks again for your answer i ended up tryng twrp and a custom rom the problem, i always end in bootloop.
I see very custom rom i try have the option to root but i always say no, is this the problem?

BlackMist21 said:
thanks again for your answer i ended up tryng twrp and a custom rom the problem, i always end in bootloop.
I see very custom rom i try have the option to root but i always say no, is this the problem?
Click to expand...
Click to collapse
Depends on the custom rom. If its based on stock dm-verity will need to be disabled. Rooting will accomplish this.
If its based on lineage or other aosp sources then it shouldn't be necessary.
However a format of data will be required either way.

ok managed to install clean nougat stock, problem rests still no touch, any idea?
and no network

BlackMist21 said:
ok managed to install clean nougat stock, problem rests still no touch, any idea?
and no network
Click to expand...
Click to collapse
How did you install the rom?
Does touch work in twrp?

ashyx said:
How did you install the rom?
Does touch work in twrp?
Click to expand...
Click to collapse
touch does not work in twrp
rom installed by twrp
does it means that my touch is really dead if not working in twrp?

BlackMist21 said:
touch does not work in twrp
rom installed by twrp
does it means that my touch is really dead if not working in twrp?
Click to expand...
Click to collapse
Maybe, but it depends on the twrp version you are using.
Try a build based on nougat.
This was one of my early builds before it became official.
https://forum.xda-developers.com/ga...nt/twrp-3-1-1-1-j7-pro-sm-j730f-g-gm-t3662621

ashyx said:
Maybe, but it depends on the twrp version you are using.
Try a build based on nougat.
Click to expand...
Click to collapse
i tried clean nougat stock, and notworking the touch not working and no imei

BlackMist21 said:
i tried clean nougat stock, and notworking the touch not working and no imei
Click to expand...
Click to collapse
See edit above.