desperate dummy needs help - OnePlus 6T Questions & Answers

Hi,
OxygenOS 9.0.11 rooted with Magisk 18.0, no mods, stock recovery
I got a notification for Magisk 18.1 and installed it with Magisk manager
Now my device stucked at: press power key to pause boot
Can push any key, nothing helps to boot
Any help is appriciated
Thanks
old_man

Was able to go to Fast Boot mode, press power key,
message: press power key to pause boot, after some seconds, the screen goes black
What to do?
old_man

Fastboot flash TWRP, once in TWRP flash the TWRP installer, reboot TWRP and flash Magisk zip file.
Download files in advance and you should be able to get back.

Thanks,
will try and report back
old_man

lol this will happen to more than one person since happened to me too.
unfortunately i'm on stock recovery and at work, so tried to wipe data and cache on recovery but didn't work.
since i already did a full wipe i will just use the tool to get back to stock lol, oh well, thats easier right now since i have all the files on my computer.

Related

Cant boot into TWRP

Hello, ive unlocked my bootloader on my h870 and ive flashed twrp. when ive just flashed it i was able to boot into twrp but now everytime i try to boot into it it wil wipe all my data with the stock lg recovery mode can someoneone please help me? Thanks! Just got the phone a few hours ago
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
mprovi_15 said:
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
Click to expand...
Click to collapse
Ok but how can i install root or a custom rom when i cannot boot into twrp?
aaflan88 said:
Ok but how can i install root or a custom rom when i cannot boot into twrp?
Click to expand...
Click to collapse
You need to reflash twrp with the bootloader like the first time.
mprovi_15 said:
You need to reflash twrp with the bootloader like the first time.
Click to expand...
Click to collapse
I understand that mprovi but hen again TWRP doesn't boot unfortunately
aaflan88 said:
I understand that mprovi but hen again TWRP doesn't boot unfortunately
Click to expand...
Click to collapse
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
The stock recovery appears but you have to select the factory reset option and it will boot into TWRP
mprovi_15 said:
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
Click to expand...
Click to collapse
Unfortunately still not succeeded after trying all the solutions i've found here
Hey, i have the same Problem, my TWRP broke, i can't boot into recovery and my Device ist not listed in fastboot mode. Can someone help me out?
I get the ring in windows when i plugin but its not recognizing.. Can someone pls help me out?
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
dwasifar said:
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
Click to expand...
Click to collapse
Oh my god, i really really thanks for your reply, you're so fre*king good. U made my day.
Guys a little help
I only manage to see the TWRP welcome screen and the the phone automatically reboots to system
I can't get to see the TWRP menu at all!!
WTF is going on?
I have repeated the process many many times and always the same. What i am missing here?!?!?
me too when it boots in twrp only showing logo then it reboots in system what are wedoing wrong?
Got the same problem. I unlocked Bootloader, checked if unlocked (yes). After flashing TWRP i see the TeamWin Screen and phone boot again. There is no TeamWin Menu.
A try with an older TWRP-Version and flashing via fastboot with another PC does not work too.
Anybody an idea?
Did you guys manage to fix it?
Matt.
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
MiR4G3 said:
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
Click to expand...
Click to collapse
With 3.2.1.0, 3.2.2.0 and 3.2.3.0 it only briefly shows the TWRP screen and then boots into system anyway.
With 3.1.1.0 the key combination to boot into TWRP as with the other versions above simply doesn't work, again it directly boots into system without even showing the TWRP screen.
I'm stuck with a resetted phone because of this bull****, because some instructions said "oh, the reset dialog will not really reset your data..." - yeah thanks for nothing, buddy.
So what now?
EDIT: I got it working using TWRP 3.1.1.0, but the same version from the OFFICIAL site didn't work, as I described above.
The only 3.1.1.0 TWRP that works with my phone is the one from this Link: http://downloads.codefi.re/rashed/g6/
(which is linked ... somewhere here in the Forum, don't remember which thread)

Moto g5 plus twrp not sticking

When I go to put the official twrp on it doesn't stick after reboot. before reboot I can't flash anything either like magisk. Nothing shows inside the folders and after I reboot and go back to twrp it shows no command
Me too. I've flashed twrp-sanders and also twrp-potter. The phone will never boot into twrp recovery on its own. Also, when I fastboot boot recovery from PC, either version of TWRP loads splash screen but is frozen and requires a hard reset.
The phone is unlocked as it indicates this on boot up.
Only once after the first attempt of flashing twrp-sanders recovery did the phone boot into twrp recovery and I flashed Magisk from there. Since then, no dice
Any ideas or direction would be greatly appreciated. Thank you
Got it to finally work. I started over by flashing "twrp-sanders-r2.img".
Make sure the first thing you do after flashing the recovery is to push volume button until you see the recovery option. Then press power button to select it. It will take several seconds before you can interact with the program.
I made sure I had the magisk.zip ready to flash first thing I did.
If you don't go to recovery immediately after flashing the twrp, you'll have to start over.
I hope this helps

Not booting into TWRP

Hey everyone,
I decided to root my lg g6 and got a fickle. After unlocking the device and flashing TWRP I tried to boot into it (''adb reboot recovery'' command) and it deleted all data and then twrp shows on screen for a split second and almost instantly boots normally into android so I set it up while still being unable to access twrp and any of it's functions. Does anyone have any idea what could be the problem?
P.S. Of it helps: before that i had a problem that every time I tried to use the ''adb reboot recovery'' command the console said ''no devices/emulators found''. After a couple tries I wanted to check whether the phone was connected just to make sure (''adb devices'') and after that it worked and I ran into the problem above.
Thanks for all the answers
When you first unlock BL and flash recovery you have to manually enter recovery mode.
Hold power and vol down till it turns off. Hold same buttons again until you see lg logo. Release power and press and hold again.
Then ask you to wipe etc hit yes both times and it will boot to twrp.
I tried that but it still doesn't go into twrp. After confirming that wipe stuff it just boots into android (without wiping)
Ulrih said:
I tried that but it still doesn't go into twrp. After confirming that wipe stuff it just boots into android (without wiping)
Click to expand...
Click to collapse
You have to flash TWRP recovery and when it complete then use the button combo to boot into twrp, otherwise it will boot and restore the recovery.
flash twrp
button combo to twrp
done
Yes I've done that but the problem still exist.
btw thanks for the help
Maybe try fastboot flash recovery recovery.img
Try the all-in-one tool on this forum
By the way, I am running into the same issue.. I have a LG G6 US997,.. I have tried installing TWRP unofficial ones so many times and every time i manually try to access the recovery.. the phone simply wipes all my data to default
Hello,
I have the same problem. Did anyone figure out how to solve it? I'd highly appreciate any help.
If I try to boot into recovery, it asks me to factory reset, i hit yes twice and then the phone just goes on to boot normally. The data is not wiped but I can't get into TWRP.
If I enter "fastboot reboot recovery" after flashing TWRP it returns "fastboot: usage: unknown reboot target recovery"

Can't access Recovery, only fastboot and the universal bootloader, please help!

So after stupidly trying to update twrp through twrp instead of fastboot, I can only access fastboot and the universal bootloader installed on the phone. If I don't do anything, the phone simply goes through universal bootloader and I see a small penguin before the screen goes back and I need to restart the phone again. However, in the bootloader I can select to go to fastboot which does work. I've tried flashing TWRP through fastboot (fastboot flash recovery twrp...) and it said success however after clicking 'reboot to recovery', the phone once again just boots to the bootloader and I'm back at square one.
Thank you so much if anyone can help!
FYI, you can update TWRP using TWRP. Nothing wrong with that, I do it all the time. It's faster and easier to do so.
You might have an incompatibility between bootstack and TWRP.
So, please provide us more info.
ROM:
Bootstack used:
TWRP version:
What were you trying to do besides updating TWRP?:
Funny thing... I'm having the exact same problem.
I instaled TWRP (3.1.1-0-9c3b7e99) using the AxonToolkit 1.2.1.
Everything went smooth with the toolkit. I could get into TWRP and did some back-ups (as recommended), then wipe Dalvik/ART Cache, System, data, cache, and finally, try to install LineageOS 15.1.
I used the files:
- ZTE_A7LOSv1_UniversalBootStack.zip
- A2017U_OreoModem.zip
- lineage-15.1-20180810-UNOFFICIAL-axon7.zip
UniversalBoot and Modem were installed correctly, but I got an error when trying to install Lineage. I can't remeber the error number but it said something like: "this ROM is for device ailsa_ii_axon7 but this device is ."
Since then... my phone is in eternal loop and can only get into Fastboot. Can't access TWRP.
Thanks in advance to anyone willing to help me.
Don't mind... I have it back.
After many reboots, It only seems that this is working different with the Universal O bootloader. On the main screen, I tap the volumen button, choose "Recovery", reboot, press the power button on the main screen, press it again, the Linux Pinguin appears, press power button again, and then TWRP is back.
After that, I got to wipe and do the normal ROM installation process.

Unlocked bootloader and installed twrp but magisk won't install

Alright so, I've managed to uppercut down to 13a from 1ca, unlock the bootloader, install twrp. Never installed supersu, but when the phone booted to twrp I installed the magisk zip with no errors. After booting the magisk manager never showed up as installed. Installed it manually, ran it, said magisk was not installed and device fails safetynet and pts. Downloaded the latest stable magisk, booted into twrp and tried flashing it AGAIN. This time I get an error that it can't flash it. I'm totally lost here. This is all I lack to have systemless root here. Also I can't seem to boot into recovery via button presses. I keep getting the pink triangle and despite holding vol+ and power, the device just boots normally. I have to force recovery via adb on pc.
Any ideas?
Bueller?
nemisans13 said:
Bueller?
Click to expand...
Click to collapse
It's his day off
Sent from my LG-H910 using XDA Labs
I kinda ran into a issue with magisk not installing properly and how I got around it was to get your roms boot image file and make a zip of it. Then, go to twrp and flash the boot image, then flash magisk.
nemisans13 said:
Alright so, I've managed to uppercut down to 13a from 1ca, unlock the bootloader, install twrp. Never installed supersu, but when the phone booted to twrp I installed the magisk zip with no errors. After booting the magisk manager never showed up as installed. Installed it manually, ran it, said magisk was not installed and device fails safetynet and pts. Downloaded the latest stable magisk, booted into twrp and tried flashing it AGAIN. This time I get an error that it can't flash it. I'm totally lost here. This is all I lack to have systemless root here. Also I can't seem to boot into recovery via button presses. I keep getting the pink triangle and despite holding vol+ and power, the device just boots normally. I have to force recovery via adb on pc.
Any ideas?
Click to expand...
Click to collapse
You installed the magisk zip and the magisk manager apk? Did you try flashing the rom and installing masik and the apk again?
For some reason on the lg phones it won't boot directly to twrp. when you boot to recovery and it ask if you want to reset, select yes. If you have twrp installed, it will then boot into recovery.
I have not since my bootloader is unlocked I heard u can't go back to stock on the vs995
nemisans13 said:
I have not since my bootloader is unlocked I heard u can't go back to stock on the vs995
Click to expand...
Click to collapse
Nothing i suggested requires stock.
With the phone off
press and hold volume down
press the power button and hold until you see the lg logo
while holding the volume down, release only the power button and press it again and hold
if you did it correctly, you should be in recovery
it will ask if you are sure if you want to reset your phone a few times
select yes, and yes
If you have twrp installed it should boot up in twrp
Or
If you already have the bootloader unlocked, make sure that developer options are enabled
go and enable adb debugging
connect usb cable
use adb to boot into fastboot
use fastboot to boot into twrp
From twrp you can flash the rom zip, magisk zip, and then install the apk after the phone rom boots up
which rom are you using? which magisk zip? which magiskmanager.apk?

Categories

Resources