I was trying to upate the SUBinary and it told me to reboot. As soon as I did I get a message saying "Custom Binary Blocked by FRP" and a red text saying "Secure Fail : Kernal" help me.
It has something to do with your Google account being logged into the phone.. samsung can send signal to reset it but they won't if it's been rooted etc still trying to make sure reflash omg the phone with original rom would make it worse or not. Or maybe just reflash in the kernal. I'm on t mobile but can only find original rom on t mobile same network but we will see. I'm on my fiance a accident messaging from her phone lol or maybe just reflash the kernal the whole problem for me is I don't have a computer to try to reflash from what someone told me I may try to reflash with odin 3.90 with a tar file to the exact model number
Solution
I had the exact same problem as you but i found a fix
i know this is a very late response but who knows maybe some people will run into it
First of all you will need
-odin3
-samsung usb drivers
-g530w tar md5 file find yours here (im telus variant but bell worked for me)
https://1fichier.com/dir/OgrN3QNx
or
https://www.youtube.com/watch?v=N33i15UVCyA
g530w Pit file here
https://drive.google.com/file/d/0BzyeAt2hy6Xea0VPUDBLOWY5WU0/view
or
http://www.sammobile.com/forum/showthread.php?t=30863
and use odin to flash your phone while its in download mode connected to your computer
skip to 1:28
https://www.youtube.com/watch?v=6lki9ei2-WM
sorry for super messy post i rarely post things i hope this saves you time
This is the best and quick fix for FRP Lock
...Just follow the link: https://forum.xda-developers.com/grand-prime/help/custom-binary-blocked-frp-t3266961/page3
Worked for my SM-G530W
I had the same problem, and i used Kies3 (not compatible with my phone anyway), but if you go on toolbar to "TOOLS", "Firmware Upgrade and initialisation", it asks you for your device model (for mine i typed SM-G530W, and then it asks you for device serial number (S/N) found under the battery by the IMEI number. After this, follow on screen prompts (Restart your device in Download mode/ PDA, connect USB cable, etc), and let the software download and install (factory rom); After your device restarts, you are good to go (sometimes if it gets stuck on booting, remove battery for few second and start again.) Now you have to go back and set up everything you want, including re-rooting your device... Good luck. (My device is Galaxy Grand Prime SM-G530W Factory unlocked rom, Android 5.11.
Need help with samsung galaxy S6 edge plus "Custom Binary Blocked by FRP Lock"
Hello Everyone
I am in a serious trouble with my Samsung galaxy s6 edge plus
I bought one in the market used one. i bring it home and it was ok .
The next day from settings i give a reset but now the phone start and giving me message """ Custom Binary Blocked by FRP Lock""" at the start and phone goes shutdown.
I put the phone in Recovery mode and connect the USB cable but neither windows ( 7 and 10) recognise the device error " Device Descriptor Request Failed"
I watched some youtube videos suggesting different techniques but still device is not recognized by Windows.
What should i do i need help Please.
I know you may have already tried, but what happens if you follow the guide for flashing a stock Rom in Odin (so follow the pre-requisits for USB drivers and what not) then put it into download mode (Power Home Vol down then vol up)
I had an FRP issue which soft bricked my s6 edge+, Samsung Switch, Lies and even ADB tools wouldn't detect the device but Odin detected the phone on Com Port 3. If after the device driver installation fails, maybe go into Device Manager, right click on the phone and update drivers manually.. extract the Samsung drivers and point to that directory.
Hi guys, I've been looking on the forums and i didn't find a way to solve my problem, my Samsung J5 J500m has the "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" screen. I've tried both smart switch and Samsung kies and it hasn't worked, the thing is that i don't have the "depuration usb" on, nor the eom unblocked, the phone interal memory is almost full and i don´t have any custom recovery such as twrp or others.
If anyone knows how to solve this or can send me to the right thread i would really appreciate it
capurrex said:
Hi guys, I've been looking on the forums and i didn't find a way to solve my problem, my Samsung J5 J500m has the "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" screen. I've tried both smart switch and Samsung kies and it hasn't worked, the thing is that i don't have the "depuration usb" on, nor the eom unblocked, the phone interal memory is almost full and i don´t have any custom recovery such as twrp or others.
If anyone knows how to solve this or can send me to the right thread i would really appreciate it
Click to expand...
Click to collapse
You don't need usb debugging or oem unlocked to recover your phone. Smart switch's emergency recover detector isn't that reliable sometimes it doesn't detect devices in emergency recover mode. However there should be a second tab in smart switch to recover your phone. It's "device initialization", device initialization works similar like odin. If you don't have this tab then you probably installed a newer version of smart switch. If that's the case follow this instruction:
1. Uninstall current installed smart switch from your pc
2. Download this ealier version of smart switch from samsungs official download center.
3. Install it. Once you run smart switch you might get a pop up screen to update to the latest smart switch version: don't update it!!. press cancel.
4. Now reinstall usb drivers in smart switch: more > reinstall device driver. Make sure to disconnect your cable first.
5. if finished, locate to More > Emergency software recovery and initialization > device initialization
6. There is a section to enter your model name, enter SM-J500M. Press search.
7. Now you need to enter your serial number. As you can't access your phone to view your serial number, you can still find it printed on your phone packaging or behind your device's battery. Enter your serial number in S/N section. Press confirm. Note: New devices don't support "device initialization" but your device should be still supported
8. Now you should see a pop up window where you see something like "initialized version". Press Ok and let smart switch recover your device. You should see a bar appearing on your device screen. If you press "ok" be warned! this step will wipe all your data on your internal storage!
9. After it's finished your device should boot normal again.
Good Luck! :fingers-crossed:
It says "this devices don't support device initialization"
Thanks anyway,
capurrex said:
It says "this devices don't support device initialization"
Thanks anyway,
Click to expand...
Click to collapse
Can you access odin mode (volume down + home button + power button to boot to odin mode)?
If yes, flash a stock firmware for your device using odin. You can download stock firmwares from SamMobile, SamFrew or Updato. Make sure you run Odin as administrator
Thank you, it worked!! :victory::victory:
i was trying whit a sammobile firmeware, i supose it was the wrong one, thanks for sending me the right one
Hi you all for those trying to unlock and root the Samsung Galaxy S8 SM-G950U snapdragon locked for USA sprint company. Voila! it is possible even if you got the 6th version firmware (latest update to October 28, 2019)
After some days trying to root and lock unsuccessfully and looking info I gave a shot to movical wesite. Price is very cheap and they guide you into the process. Basically the steps are:
1- download and run unlock client software and select your model. (They send you all the links)
2- Select you phone model and Insert the license provided by movical website in the search bar.
3- Install samsung drivers into the pc and connect the phone via usb to pc
4- Open the device manager (window+x ) and see what type of connection is showing the phone. If it say "modem" it will no work. You must set up to "ADB" for that follow this step (two options):
First developer option must be activated
4.1 Dial *#0808# if this not work (in my case didn't) then
4.2 Dial ##3434# when prompted select CMDA, another screen will show up, then tap on DM+MODEM+ADB.
4.3 Check again device manager after plug the phone again into pc it should now say "ADB"
5- Run Unlock client set up the settings and it will return a message that is not possible unlock cause flash must be done first and the software provide the link to download the files needed for make the flash
6- Flashing:
Open Odin and set up the file recomended by unlock client software on the Odin ( i used v3.13 version) AP section. Let Odin software do the rest. Voila you phone has been flashed.
7- After flashed turn on the phone and plug it again into the pc
6- Set up and Run the Unlock client software again and voila this time the software is able to unlock the phone the message " Unlocked" should be displayed on the screen.
8- Recover to stock room
8.1 Download the files recomended by unlock client for recovery
8.2 Open Odin and set up all the files Ap, BL, CP, CSC (you got two option here if you select CSC home yo got the sprint logo back if you dont want it then select CSC file) and USER Data
8.3 Let odin do the rest and check if it pass
9 Voila phone unlocked
I used window 10 computer. As a reminder i did it for Samsung Galaxy S8 SM-G950U with the 6th version of firmware unlocked by Sprint
I have a Samsung Galaxy Tab A (2020, SN-T307U) that I got from work. It's an old Doordash tablet that Doordash didn't want back, so I'm trying to reset it and it's driving me crazy. I have followed so many tutorials trying to get this thing to work, I keep getting caught on something.
- Simply factory resetting does not work, gives an error that MDM does not allow it.
- I cannot put in the wrong password 15 times to factory reset, even though I get a warning it just lets me continue trying after 15 fails.
- I cannot enter the bootloader, rebooting to bootloader just reboots to the OS.
- I cannot enter safemode, same as above.
- I cannot enable developer options, so no OEM unlock or USB debugging. Tapping build number gives me an error that the MDM does not allow this option.
The device is recognized by Odin, can I just brick this thing and repartition from scratch? Can someone who knows what they're talking about walk me through that? I'm not really sure what I'm doing here, learning as I go over these last 2 days.
Hello,
I have the same exact same issue, have you been able to unlock it?
Thank you!
I can fix it remotely the last hope
Same Issue here,
Any one had any luck with MDM T307U. Please assist.
rittnerb said:
I have a Samsung Galaxy Tab A (2020, SN-T307U) that I got from work. It's an old Doordash tablet that Doordash didn't want back, so I'm trying to reset it and it's driving me crazy. I have followed so many tutorials trying to get this thing to work, I keep getting caught on something.
- Simply factory resetting does not work, gives an error that MDM does not allow it.
- I cannot put in the wrong password 15 times to factory reset, even though I get a warning it just lets me continue trying after 15 fails.
- I cannot enter the bootloader, rebooting to bootloader just reboots to the OS.
- I cannot enter safemode, same as above.
- I cannot enable developer options, so no OEM unlock or USB debugging. Tapping build number gives me an error that the MDM does not allow this option.
The device is recognized by Odin, can I just brick this thing and repartition from scratch? Can someone who knows what they're talking about walk me through that? I'm not really sure what I'm doing here, learning as I go over these last 2 days.
Click to expand...
Click to collapse
If you look at all of the previous post, it should tell you that no one has found a way to disable an MDM lock. Which is as it should be. Otherwise the lock would be useless.
lewmur said:
If you look at all of the previous post, it should tell you that no one has found a way to disable an MDM lock. Which is as it should be. Otherwise the lock would be useless.
Click to expand...
Click to collapse
That's not true as of today's date. (In the event this post is viewed after this exploit can be successful).
I am not taking credit and perhaps the op has discovered it. Anyway...
I am in Canada and noticed the carriers here stop at BL 8 while the USA has BL 9.
The unit i had was on BL 9 (csc TMB).
This probably works for Canadians on BL 8. I don't recommend flashing to BL 9 as that may affect your service or experience.
ANYWAY! This guide won't explain any prerequisites. They are adb, installing unsigned drivers, and you aren't able to use the device and are the owner
1) if not already, power off device with vol down+power and ensure battery is at least 50%.
2) enter recovery and factory reset. If you're having difficulty entering recovery, plug into your pc and as soon as you hear the audible disconnect, switch to vol up+power. Or jam on all three buttons for dl mode.
If in dl mode you can check firmware version and just flash it with bl, ap, cp and csc (NOT home csc). Use exact current version. Don't worry about userdata if it is USA
3) at welcome, connect wifi and imnediately go back to first screen. Don't use data sim
4) dl samfw app and on misc tab, check driver status and your pc will reboot.
*you must not have secure boot enabled
5) plug phone into pc. In the app, mtp and select youtube. If done right, click the pop up on your phone and navigate to chrome. Should be automatic.
6) search for vnrom frp. Once there download package disabler pro and notification app. They are side by side. Install notification app and set it up so you can swipe quick settings from top of screen.
5) unplug your phone from pc and plug it back in. Should be able to get back to the package app various ways to install it. Before install, turn wifi off. Now run package disabler and when it prompts for device admin, turn wifi on. It'll glitch a bit but should start.
6) locate samsung setup wizard. Don't confuse with the other. It'll have a green icon. Disable it and clear the storage. At bottom left, tap the back arrow and you should be back at final setup.
7) when asked to add samsung account, turn off wifi. Complete setup and don't add any accounts.
8) you should arrive at home screen. Your phone is re-plugged right? Good. Now turn on usb debugging and use the remove knox from the app. Done.
*i think i turned wifi on just before enabling debugging. I forget.
*if you are sloppy... you'll need to start over. You'll see, or already know
*you can do ota (if there still is any) but factory resetting or odin flashing will put you back to managed.
mindlery said:
That's not true as of today's date. (In the event this post is viewed after this exploit can be successful).
I am not taking credit and perhaps the op has discovered it. Anyway...
I am in Canada and noticed the carriers here stop at BL 8 while the USA has BL 9.
The unit i had was on BL 9 (csc TMB).
This probably works for Canadians on BL 8. I don't recommend flashing to BL 9 as that may affect your service or experience.
ANYWAY! This guide won't explain any prerequisites. They are adb, installing unsigned drivers, and you aren't able to use the device and are the owner
1) if not already, power off device with vol down+power and ensure battery is at least 50%.
2) enter recovery and factory reset. If you're having difficulty entering recovery, plug into your pc and as soon as you hear the audible disconnect, switch to vol up+power. Or jam on all three buttons for dl mode.
If in dl mode you can check firmware version and just flash it with bl, ap, cp and csc (NOT home csc). Use exact current version. Don't worry about userdata if it is USA
3) at welcome, connect wifi and imnediately go back to first screen. Don't use data sim
4) dl samfw app and on misc tab, check driver status and your pc will reboot.
*you must not have secure boot enabled
5) plug phone into pc. In the app, mtp and select youtube. If done right, click the pop up on your phone and navigate to chrome. Should be automatic.
6) search for vnrom frp. Once there download package disabler pro and notification app. They are side by side. Install notification app and set it up so you can swipe quick settings from top of screen.
5) unplug your phone from pc and plug it back in. Should be able to get back to the package app various ways to install it. Before install, turn wifi off. Now run package disabler and when it prompts for device admin, turn wifi on. It'll glitch a bit but should start.
6) locate samsung setup wizard. Don't confuse with the other. It'll have a green icon. Disable it and clear the storage. At bottom left, tap the back arrow and you should be back at final setup.
7) when asked to add samsung account, turn off wifi. Complete setup and don't add any accounts.
8) you should arrive at home screen. Your phone is re-plugged right? Good. Now turn on usb debugging and use the remove knox from the app. Done.
*i think i turned wifi on just before enabling debugging. I forget.
*if you are sloppy... you'll need to start over. You'll see, or already know
*you can do ota (if there still is any) but factory resetting or odin flashing will put you back to managed.
Click to expand...
Click to collapse
This method works up to step 7 for me. I can't seem to enable usb debugging before knox kicks in. With or without wifi. I'm experimenting to see if I can get past that step.
How to Remove MDM Control from Android?For anyone suffering from this issue, the following are the steps to bypass Samsung Knox factory reset protection:
First of all, create a password for the device.
Make sure that your device is charged to an 80% or greater charge.
Next, you’ll need to go to Settings and Security Encrypt Device tabs respectively.
Set a PIN/password for your device.
After you have secured your device and it’s gone through. Reboot the device, and when it boots, it will ask you to enter a password in order to access your device to view encrypted data. If you type the wrong password 15-20 times (it depends on your device), it’ll wipe your device of any information and will restart and then appear like you’re registering as a brand new device after a factory reset.
Thats the 2th!!! Try it
Video - Samsung SM-T307U Galaxy Tab A 8.4 2020 Knox Remove || Tab a 8.0 MDM Remove
the Tool from the Video Tutorial is here >> SamFwToolSetup_4.3