Database Users

[WIP] Multiboot Project For Oneplus 3

Multiboot project is a work done by @chenxiaolong , I do not own any of the work presented over here.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Project
* before installing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
About Multiboot : A project to handle different ROMS at the same time so that you actually can use different ROMS without having to wipe up device to flash ROMS, it allows installation of more thn one ROM with all the features enabled.
USAGE​1. Decrypt your phone by following THIS guide, else you won't be able to use Multiroms.
2. Boot into your primary ROM and install the Dual Boot Patcher app
3. Open the app and go to "Roms" in the navigation drawer. It will ask if you want to set the kernel. Make sure that you do.
4. Go to "Patch ZIP file" in the navigation drawer and patch the ROM or zip you want to install. If you can't select the ZIP file without opening it (OxygenOS's file explorer does that as example) use Solid Explorer, ES File Explorer seems to crash the App for some reason.
5. If you want to dual-boot with OxygenOS you'll most likely have too less space in /system. Instead use the Data-Slot and give a name for it when asked.
6. (Optional) Before flashing GApps refer to the section "In-app flashing" below and come back once you've done that.
7. (Optional) Download GApps from HERE, select ARM64 and the version you want, download it onto your phone, choose "Patch ZIP file" once again and select the Data-Slot which it created for you already.
8. (Optional) To flash GApps simply refer to the section "In-app flashing" again.
In-app flashing​
To use in-app flashing, go to "Roms" in the navigation drawer, tap the floating button on the bottom right, and add the zips you want to install. You can queue multiple zips and they will all be flashed in one go. Once you've added all the zips you want to flash, click the check mark in the action bar and they will be flashed right away.
DOWNLOAD: https://snapshots.noobdev.io/
Download the "Android" file and the "Utilities" file
ORIGINAL THREAD: http://forum.xda-developers.com/showthread.php?t=2447534
CURRENT ISSUES​
#since this is a work in progress please do consider having a look here
1. If you update ramdisk and reboot then the phone will reboot to recovery and not boot to rom. You will have to reflash your rom for it to boot.
2. Lots of other issues.
3. When setting a lock-code in your second ROM and boot back to your main ROM you'll probably be greeted with "Wrong PIN/Pattern". To fix this either delete the following files in TWRP or via ADB:
In /data/system: password.keym pattern.key, locksettings.db, locksettings.db-shm, locksettings.db-wal
After this step you can go back into your main ROM and set a lock-code again, now it should work.
DONATION (this donation directly goes @chenxiaolong ,I do not take any of it) : http://forum.xda-developers.com/donatetome.php?u=4277844 #if not sure about the link kindly visit:
http://forum.xda-developers.com/member.php?u=4277844
CREDITS​
All credits goes to @chenxiaolongfor his hard work on this project,
kindly say thanks to him
Thanks to @hunter_bruhh too. He did the pull request on github.
I am currently in need of testers so if anyone is interested, please pm me on tapatalk chat, xda pm or telegram to https://telegram.me/RKRohk
XDA:DevDB Information
Multiboot Project For Oneplus 3, Tool/Utility for the OnePlus 3
Contributors
rkrohan, hunter_bruhh, epiclper, @chenxiaolong
Version Information
Status: Alpha
Created 2016-07-03
Last Updated 2016-07-07

Seems like no rom is working with this. I have informed @chenxiaolong but till then, I need logs from anyone who is trying this on any custom rom. You can find logs in the multiboot folder in your internal storage. Thank you.

If you remove encryption then this should work. Try using the data slot to install a custom ROM while you are on a custom ROM and please let me know if it worked. For those getting ramdisk issues, ?*just flash /sdcard/MultiBoot/primary/boot.img.before-ramdisk-update.img from TWRP.

Reserved
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
---------- Post added at 10:42 AM ---------- Previous post was at 10:42 AM ----------
Waiting for it to boot properly..
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

http://forum.xda-developers.com/oneplus-3/development/patcher-dual-boot-rom-oneplus-3-t3409591
what's the difference？

dlhxr said:
http://forum.xda-developers.com/oneplus-3/development/patcher-dual-boot-rom-oneplus-3-t3409591
what's the difference？
Click to expand...
Click to collapse
@hunter_bruhh and I worked on this not the guy who made the other thread

Anyone get dual boot successfully? I tried install Cm13 as secondary in data slot, but end up with vibrations and boot into recovery.

youlun.zhai12 said:
Anyone get dual boot successfully? I tried install Cm13 as secondary in data slot, but end up with vibrations and boot into recovery.
Click to expand...
Click to collapse
no...same with Paranoid ROM...

youlun.zhai12 said:
Anyone get dual boot successfully? I tried install Cm13 as secondary in data slot, but end up with vibrations and boot into recovery.
Click to expand...
Click to collapse
I tried almost every rom but it dosen't work. I need logs from a guy who is not on stock rom. I have informed @chenxiaolong about this. Hope it gets fixed soon

How do I decrypt the OnePlus 3 tho? The Security>Encryption option does exactly nothing when I touch it...

Thanks…
I install second rom ResurrectionRemix-M-v5.7.0-20160703-oneplus3
But how I can switch to boot secondary rom??

EpicLPer said:
How do I decrypt the OnePlus 3 tho? The Security>Encryption option does exactly nothing when I touch it...
Click to expand...
Click to collapse
In bootloader mode > "fastboot format userdata" > done. But all your data will be lost. So make a backup on your pc first...

Want to decrypt your device in order for this to work?
Here's how you can do that!
http://forum.xda-developers.com/oneplus-3/how-to/unencrypt-oxygenos-loosing-data-t3412228/

Managed to recover from a "disaster" after trying to upgrade my main, primary ROM (OxygenOS)...
So, I downloaded OxygenOS 3.2.1 and SuperSU and patched it via Dualboot Patcher, so far so good.
Then I booted into my secondary ROM (Resurrection Remix) since flashing on the currently running ROM is not allowed.
Started the Flash on the second ROM, however I accidentally hit the recent apps key, once I switched back to Dualboot Patcher it crashed...
I panicked a little, I booted into TWRP and flashed both files from there (first OOS, then SuperSU to prevent it from encrypting again).
After that I rebooted, however immediately after rebooting the OnePlus logo came on, went black and rebooted into the OnePlus logo again. Well, nothing much wrong so far, that's usual SuperSU behavior.
After the second reboot my phone was stuck in a bootloop and got extremely hot, I left it sit there thinking it'd encrypt again due to me doing something wrong (this happens when you forget to flash SuperSU after OOS)
After almost 40 minutes, still nothing. So I went to my PC and took a look what logcat says: Java Fatal Exception, something battery related wasn't able to load up.
So I force-shutdown the device and booted back up, not even 20 seconds later it booted into Android like nothing before happened...
Lesson of this story: NEVER flash your primary ROM from the secondary one... ALWAYS patch the ZIP files first, then boot into TWRP, then flash them.

I installed a dual system rom for mistake and obviously cannot use it, I also installed a data dual rom which is working fine, my issue is that when I try to remove the dual system rom I cannot do it, even if I move to raw/system/multiboot and try to delete I can't, I tried to change the permission, to set raw folder as a writable folder but none of this tries work..any help?

I have been using multirom on nexus. I saw multirom is also there for OP3. currently on OP3 I have flashed multirom(that similar to Nexus) , then i came across this THREAD.
Just a noob question - how different it is from multirom?
No disrespect to the developer intended.

Tried with RR and AOSPA, didnt work, i think its not flashing the second ROM properly..?

Root RedmI Note 3 snapdradon MIUI 8 6.9.9 developer rom (marshmallow)

Since, the release of the Android M. Google make it hard to root your device. On MIUI 8 with marshmallow I have been trying to figure out a way to root my device. In almost every case I found myself in a boot loop. So after a long work i finally succeed to root my redmi note 3 with no error and bootloop.
I am not responsible for any damage to your devices,loss or damage caused, or alleged to have been caused, directly or indirectly, by the informations or ideas suggested or referenced, etc. If you get a boot loop you can get back to booting by simply flashing the stock "M" system image via fastboot. or Mi flash tool.
Please try at your own risk. Your warranty is now void.
PRE-REQUIREMENTS
1. redmi note 3 ( SD only) with official MiUI 8 6.9.9 developers rom (marshmallow update) :good:
2. officially unlocked bootloader.
3. TWRP recovery ( alka twrp recommended ).
4. patched boot image given below.
5.brain
METHOD RECOVERY METHOD.
1. Download boot.zip and SuperSu.zip
superSu.zip -https://www.androidfilehost.com/?fid=24727369092694142
boot.img - https://www.androidfilehost.com/?fid=24727369092694141
2. copy both the files (boot.img and SuperSu.zip) to your external SD card.
3. now reboot the device in recovery and go to mount section and mount all the partitions.
4. now go to install and go to SD card and flash SuperSu.zip.
5. as the super su is installed go back in install section and select install image.
6. now you will see only .img files so locate to boot.img and select it.
7. In next window you may see two option as " select partition to flash image:" select the first one option BOOT partition and slide the installation slider and reboot your redmi note 3 SD
boot up may take 5-10 mins so don't we panic. and please mention in the comment was it worked for you or not so I can edit boot image for you..
if i help you give me a thanks, by clicking on thanks button

I am on Miui8 6.9.15 Marshmallow, used supersu.zip, boot.img for rooting..., successfully rooted but some times when I restart the device network gone, sometimes bootloop is occurring.. So I need to flash boot.img again and again.. This is taking a lot of time.. What to do?

Just flash supersu stable using ZCX twrp. Head over supersu xda thread for latest stable flashable zip. Worked for me without any issue.

ubaid137 said:
I am on Miui8 6.9.15 Marshmallow, used supersu.zip, boot.img for rooting..., successfully rooted but some times when I restart the device network gone, sometimes bootloop is occurring.. So I need to flash boot.img again and again.. This is taking a lot of time.. What to do?
Click to expand...
Click to collapse
this boot image is only stable with MIUI 8 6.9.9. i am currently working on a universal boot image so no encryption problem occurred... please wait thanks

tsrajput said:
this boot image is only stable with MIUI 8 6.9.9. i am currently working on a universal boot image so no encryption problem occurred... please wait thanks
Click to expand...
Click to collapse
Also my wifi is not working after root..

Does AUX issue resolved in this ROM?
Yet nobody have solution on it hence; i asked.
Headphones work but AUX cable is not working.

Satav said:
Yet nobody have solution on it hence; i asked.
Headphones work but AUX cable is not working.
Click to expand...
Click to collapse
This is not a rom, its a rooting guide.

any news on this ? any new boot.img. I'm on 6.9.22 beta. thanks

[Official][TWRP Recovery][3.2.1]TWRP 3.2.1.0 For Xiaomi Redmi 4X (SANTONI)

Team Win Recovery Project 3.x, or TWRP3.x for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Download : TWRP 3.2.1.0 For Santoni
Source Device Tree: Device Tree For Building TWRP

Woow . Thank you so much for the official update bro keep rocking

The encryption issue exists in this version??

Thanks

k_vki said:
The encryption issue exists in this version??
Click to expand...
Click to collapse
+1

Nope... But you sud upgraded from 3.1.1.0

k_vki said:
The encryption issue exists in this version??
Click to expand...
Click to collapse
Yes, The encryption issue exists in this version as well..

I upgraded directly from 3.1.0(no encryption problem) to 3.2.1 through twrp app downloaded from play store and there is no encryption problem...

@gunsheriff . . . Bro i want urgent help plzz anyone help me fasst as u can possible . . I am on miui9 v7.12.8 beta and unlocked bootloader and i am going to install this latest twrp3.2.1 via fastboot . . . I seen some warning about dmverity and device encrypt not booting somthing like that . . . So my question is want to flash lazyflasher after flashing this recovery to avoid bootloop??? Or want to do anymore steps for stablize the twrp without bootloop??and what are the steps ?? Plzz anyone help faaast because i am going to install twrp tonight ?

gunsheriff said:
Team Win Recovery Project 3.x, or TWRP3.x for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Download : TWRP 3.2.1.0 For Santoni
Source Device Tree: Device Tree For Building TWRP
Click to expand...
Click to collapse
Changelog?

Go throught twrp.me website...

Ramakrishnan ? said:
@gunsheriff . . . Bro i want urgent help plzz anyone help me fasst as u can possible . . I am on miui9 v7.12.8 beta and unlocked bootloader and i am going to install this latest twrp3.2.1 via fastboot . . . I seen some warning about dmverity and device encrypt not booting somthing like that . . . So my question is want to flash lazyflasher after flashing this recovery to avoid bootloop??? Or want to do anymore steps for stablize the twrp without bootloop??and what are the steps ?? Plzz anyone help faaast because i am going to install twrp tonight ?
Click to expand...
Click to collapse
Do you use any custom recover before in your device..

vicky083_ said:
I upgraded directly from 3.1.0(no encryption problem) to 3.2.1 through twrp app downloaded from play store and there is no encryption problem...
Click to expand...
Click to collapse
really?

with encryption issue you mean that it's not possible to mount an encrypted data partition as even with the right password you'll always get a failure message? because that's what i get. is there a workaround known or does this mean you have to factory reset every time you want to flash something?

Riy12 said:
really?
Click to expand...
Click to collapse
Yup, try to upgrade from 3.1.0 to 3.2.1 through twrp official app.. Avoid version 3.1.1..

vicky083_ said:
I upgraded directly from 3.1.0(no encryption problem) to 3.2.1 through twrp app downloaded from play store and there is no encryption problem...
Click to expand...
Click to collapse
Try for flash miui rom, because encyption issue exist when i flash miui rom

gunsheriff said:
Do you use any custom recover before in your device..
Click to expand...
Click to collapse
Flashed successfully everythink works great thank you dev for the official stable update ☺

Ramakrishnan said:
Flashed successfully everythink works great thank you dev for the official stable update
Click to expand...
Click to collapse
MAGILCHI

F2FS /data is broken. Once you format it to F2FS, TWRP can no longer mount it:
Failed to mount '/data' (No such device)

Did you try removing encription?
Can be done by wiping data partition: https://forum.xda-developers.com/xiaomi-redmi-4x/development/automatic-encryption-t3684422

How to Root Huawei Y6 2018 - ATU-XXX

Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Hey.
In this tutorial i will show you how to root Huawei Y6 2018.
Devices that should work:
ATU-L11
ATU-L21
ATU-L22
ATU-L23
ATU-L31
ATU-L42
YGN-AL00
YGN-L21
YGN-L22
YGN-L23
YGN-L41
YGN-L42
YGN-L51
YGN-L61
YGN-TL10
First you need to have the bootloader unlocked and usb debugging enabled.
Download this Magisk Patched Ramdisk from here: https://mega.nz/#!OdpDiKJb!MBjuu0fbjqSuynxGZ9n0x9JuoqXcV5YYXoZOvOaYAbU
After that go into fastboot and type: fastboot flash ramdisk ramdisk.img
Now type fastboot reboot. Wait your phone to boot and now it should be rooted
(You might have to install Magisk Manager mannualy to propretly use root permissions)
Tested only on ATU-L21, use at your own risk!
Tested only on EMUI 8. I'm not sure if it would work on Lineage 15.0
Original Ramdisk: https://mega.nz/#!bdwTiD5I!STHIWQrCle_nCoPKe4_Mgvo9z_Qn4Etnnhbt0fmG1PE
Kernel.img, if your phone shows Huawei logo and then goes blackscreen: https://mega.nz/#!KAoR3KYT!ufZv7ZbBsB_Bf9Rw_7vovbGJMmsuPOpUeIAFgUohKE0
If something goes wrong, you could try to flash this one.
Tutorial for noobs here: https://forum.xda-developers.com/hu...i-y6-2018-atu-xxx-t3815407/page3#post77139034
If i helped, press the Thanks button
(I don't own the device)

t-mobile_mda said:
hey guys again..
or u can share modemst parts...
fsc -> /dev/block/mmcblk0p15
fsg -> /dev/block/mmcblk0p24
modemst1 -> /dev/block/mmcblk0p32
modemst2 -> /dev/block/mmcblk0p33
Read..
dd if=/dev/block/mmcblk0p15 of=/sdcard/mmcblk0p15
dd if=/dev/block/mmcblk0p24 of=/sdcard/mmcblk0p24
dd if=/dev/block/mmcblk0p32 of=/sdcard/mmcblk0p32
dd if=/dev/block/mmcblk0p33 of=/sdcard/mmcblk0p33
tia...
Click to expand...
Click to collapse
i can help you with this, i need an good EFS backup, just help me with how can i activate diag for backup the qcn, i have the ATU-L42 model, it is the same board.
i will root my device and try to activate diag.
here are the backups you asked for, are from a locked ATU-L42

I won't recommend to install it on ATU-Lxx because it's build for The L21, every bootimage of all ATU devices are different except L22 and. L22, so you might soft brick your phone. But still thanks for your tutorial.

iDecrypt said:
I won't recommend to install it on ATU-Lxx because it's build for The L21, every bootimage of all ATU devices are different except L22 and. L22, so you might soft brick your phone. But still thanks for your tutorial.
Click to expand...
Click to collapse
One friend of mine, Runner85sx, looked into your device Kernel and veryifed what models of the Y6 2018 should be compatibile with this root method.
Thread updated, with the devices that will root sucesfully with this method.

Thespartann said:
One friend of mine, Runner85sx, looked into your device Kernel and veryifed what models of the Y6 2018 should be compatibile with this root method.
Thread updated, with the devices that will root sucesfully with this method.
Click to expand...
Click to collapse
Thanks for updating your thread

how to unlock bootloader? mine is ATU-L22

brixnix said:
how to unlock bootloader? mine is ATU-L22
Click to expand...
Click to collapse
This is not the place to ask these things at all...
To unlock your bootloader you will need to get your Bootloader unlock code, witch huawei doesen't provide anymore, from what i know. So you will have to use something like DC-Unlocker and pay to get your bootloader unlock code. After you got your bl unlock code you should install HiSuite, Minimal adb and fastboot on your PC. After that enable USB Debugging and OEM Unlock from your device developer settings.
Now connect your device to your PC and type this in Minimal adb and fastboot console:
Code:
adb devices
Now accept any dialog that will show up on your phone. If your device is recognised then type
Code:
adb reboot bootloader
Then write
Code:
fastboot devices
To see if your device is recognised while in fastboot, and if it is type
Code:
fastboot oem unlock (bl unlock code)
That's it.
For any futher help make a thread on Huawei Y6 Questions and Answers please.
If i hepled press the Thanks button

Do you have recovery for Y6 2018 (ATU-L22) like TWRP or CWM Recovery?

TsunaXZ said:
Do you have recovery for Y6 2018 (ATU-L22) like TWRP or CWM Recovery?
Click to expand...
Click to collapse
THIS IS NOT THE THREAD TO ASK THAT.
If i had i would share it on the forums. As you see there are no recoveries for the Y6 2018.

Thespartann said:
THIS IS NOT THE THREAD TO ASK THAT.
If i had i would share it on the forums. As you see there are no recoveries for the Y6 2018.
Click to expand...
Click to collapse
Sorry just got curious.. thanks for the guide btw but there is a problem, I cannot access any google application like playstore,gmail, & etc,. I can't also add Google account because it loads forever and at the end it says: "Couldn't sign in". Need help please Thanks!

After updating inside magisk app the phone won't work it just shows "Huawei" then blackscreen.

TsunaXZ said:
After updating inside magisk app the phone won't work it just shows "Huawei" then blackscreen.
Click to expand...
Click to collapse
Could you please be more explicit?
So you rooted your phone with this method, and after you applied a update to Magisk? or Magisk Manager now your phone wont boot?
Also what happens when you want to acces play store?

Thespartann said:
Could you please be more explicit?
So you rooted your phone with this method, and after you applied a update to Magisk? or Magisk Manager now your phone wont boot?
Also what happens when you want to acces play store?
Click to expand...
Click to collapse
Yes I rooted my phone with this guide and the root access works at first playstore still works connected with my Google account so I tried to remove it but when I try to add any google account it just keep loading, Gmail loads forever. after that I tried to update the Magisk inside the manager which got success but when i boot it up. It just shows "Huawei" then turn off.

TsunaXZ said:
Yes I rooted my phone with this guide and the root access works at first playstore still works connected with my Google account so I tried to remove it but when I try to add any google account it just keep loading, Gmail loads forever. after that I tried to update the Magisk inside the manager which got success but when i boot it up. It just shows "Huawei" then turn off.
Click to expand...
Click to collapse
I see. You could try to flash the original ramdisk from fastboot just like you flashed the patched ramdisk.
Download link: https://mega.nz/#!bdwTiD5I!STHIWQrCle_nCoPKe4_Mgvo9z_Qn4Etnnhbt0fmG1PE
Why you wanted to remove it? x)
You could maybe uninstall all google stuff and install MicroG/Reinstall Gapps. Or restore Emui's system.
I think you should give a try to iDecript's Lineage 15.0 Rom.
Link: https://forum.xda-developers.com/huawei-y6/development/rom-lineageos-15-0-huawei-y6-2018-t3811575

Thespartann said:
I see. You could try to flash the original ramdisk from fastboot just like you flashed the patched ramdisk.
Download link: https://mega.nz/#!bdwTiD5I!STHIWQrCle_nCoPKe4_Mgvo9z_Qn4Etnnhbt0fmG1PE
Why you wanted to remove it? x)
You could maybe uninstall all google stuff and install MicroG/Reinstall Gapps. Or restore Emui's system.
I think you should give a try to iDecript's Lineage 15.0 Rom.
Link: https://forum.xda-developers.com/huawei-y6/development/rom-lineageos-15-0-huawei-y6-2018-t3811575
Click to expand...
Click to collapse
Well I accidentally deleted it because my mails on my Gmail won't load but that doesn't work. Actually I'm already downloading Lineage OS with Gapps & SuperSu by iDecrypt. I'm hoping it is much snappier than EMUI 8.0.0. Fact is this is my first phone from Huawei right after I got my Galaxy note 4 lcd broke which cost half of the phone itself lol. So I'd rather buy a new phone than replacing the old one. :3
Restore EMUI system? how? is that on eRecovery? the only option on it was 1.)"Download latest version and recovery"which doesn't work 2.)"Wipe data/factory reset" 3.)Reboot 4.)Shutdown
Do you have stock rom for this model? cuz I can't seem to find one for this. Thanks for your time btw
I tried the first link you provide which is ramdisk but that doesn't help either.

TsunaXZ said:
Well I accidentally deleted it because my mails on my Gmail won't load but that doesn't work. Actually I'm already downloading Lineage OS with Gapps & SuperSu by iDecrypt. I'm hoping it is much snappier than EMUI 8.0.0. Fact is this is my first phone from Huawei right after I got my Galaxy note 4 lcd broke which cost half of the phone itself lol. So I'd rather buy a new phone than replacing the old one. :3
Restore EMUI system? how? is that on eRecovery? the only option on it was 1.)"Download latest version and recovery"which doesn't work 2.)"Wipe data/factory reset" 3.)Reboot 4.)Shutdown
Do you have stock rom for this model? cuz I can't seem to find one for this. Thanks for your time btw
Click to expand...
Click to collapse
Here is the Stock Rom for ATU-L21. I know you own an ATU-L22 but from what i know it should work perfectly with your model too.
Download link: http://huawei-firmware.com/rom/huawei-y6-2018/atu-l21/19931
I will upload it to MEGA later today, as the download speed is much better on Mega.
Yeah well from now i don't recommend Huawei Phones anymore as they don't provide Bootloader Unlock codes anymore.
Instructions on restoring Stock should be avalabile on the same page that i sent you for downloading.
As of my time, well if i made this thread i should also help people that had issues
As i don't have the device and i'm not really used to Treble i'm not yet providing treble Roms for this device. But i might be doing that in the future.

Thespartann said:
As i don't have the device and i'm not really used to Treble i'm not yet providing treble Roms for this device. But i might be doing that in the future.
Click to expand...
Click to collapse
I'm looking forward into that :good:
Do you think iDecrypt's LoS 15.0 would fix my problem? cuz I'm halfway of the download.

I tried downloading the link you've provided of the stock rom and I got the "UPDATE.ZIP" inside there's a file called UPDATE.APP what should I do? need help Thanks!
If I'm correct there is a 2 methods which is: SD card method and by using Fastboot

TsunaXZ said:
I tried downloading the link you've provided of the stock rom and I got the "UPDATE.ZIP" inside there's a file called UPDATE.APP what should I do? need help Thanks!
If I'm correct there is a 2 methods which is: SD card method and by using Fastboot
Click to expand...
Click to collapse
You should try to use erecovery to install it.
Put that update.zip in dload folder on sdcard/internal. Then press power vol up vol down when your phone is not on.

Thespartann said:
You should try to use erecovery to install it.
Put that update.zip in dload folder on sdcard/internal. Then press power vol up vol down when your phone is not on.
Click to expand...
Click to collapse
The problem is the phone is bricked, Yes I can access eRecovery but computer doesn't recognize it both internal & external.

TsunaXZ said:
The problem is the phone is bricked, Yes I can access eRecovery but computer doesn't recognize it both internal & external.
Click to expand...
Click to collapse
Just insert a sdcard and place the dload folder containing the update.zip then. Is it recognised in fastboot? Then why don't you flash LineageOS to make the phone usable for a while.
There is another option. Get the update. app and extract it with huawei update extractor. Then go into fastboot and flash ramdisk, kernel and everything you can flash from that.
Example: fastboot flash kernel kernel.img
Didn't quite have time for helping more.

[RECOVERY][3.4.0-14][toco]Unofficial TWRP Xiaomi Mi Note 10 Lite (TEST)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Flash Rom works
- F2FS support
- Fastboot boot command support
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash (system-vendor-product)
- Android 11 fully support
Download:
TWRP 3.4.0-14 Unofficial by mauronofrio
TWRP 3.4.0-13 Unofficial by mauronofrio
To Flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually or using a fastboot command.
Code:
fastboot boot twrp-3.3.1-xx-xxxxxx-mauronofrio.img
or
Code:
fastboot oem reboot-recovery
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/Teamwin/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_toco
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
- Thanks to @bigbiff and @Captain_Throwback for the hard work on this android 10 TWRP
Thanks to all testers on the Telegram Group
Created 2020-05-29

Oooo finally... Gonna test this out when I get home later.
Just to check, what happens if i flash and i get bootloop? How do I recover? By flashing the entire MIUI rom from official site?
Okay Im sure im being a noob... But err...
I wasnt able to mount data...
I tried to mount and install MAGISK via USB-OTG mounting and i get permission denied for system and vendor (and also Data unable to mount)
EDIT2: Oh cool... despite the errors Magisk got installed! Nice!

Hello, will there be more development for this terminal? and the note 10 lite thread? Thank you

Did anyone boot it?
hello, work boot it?
fastboot boot twrp.XXXX.img

StanGumn said:
hello, work boot it?
fastboot boot twrp.XXXX.img
Click to expand...
Click to collapse
Yes

iron maiden said:
Hello, will there be more development for this terminal? and the note 10 lite thread? Thank you
Click to expand...
Click to collapse
Let us hope so.

I would like to apologize in advance as I am a noob when it comes to the recent changes made by Google to android. So on a lot of the recent devices launched with android 10, an essential step before flashing Magisk is to disable the vbmeta partition by flashing the "vbmeta.img" using a fastboot command with the --disable-verify and --disable-verification argument. My question is that is the "vbmeta.img" modified by developers or is this the same identical file found in the stock firmware files?
I do apologize if this is the wrong thread but there's not many resources online or even on xda for this device.

Why its in mi note 10 general section? Isnt right to do separately section for mi note 10 lite since there is nothing in common just name.

Reanimax said:
Why its in mi note 10 general section? Isnt right to do separately section for mi note 10 lite since there is nothing in common just name.
Click to expand...
Click to collapse
ask to xda to make a dedicated section and i will ask to move this thread

mauronofrio said:
ask to xda to make a dedicated section and i will ask to move this thread
Click to expand...
Click to collapse
Yes. You right about it.

Kediraksith said:
Oooo finally... Gonna test this out when I get home later.
Just to check, what happens if i flash and i get bootloop? How do I recover? By flashing the entire MIUI rom from official site?
Okay Im sure im being a noob... But err...
I wasnt able to mount data...
I tried to mount and install MAGISK via USB-OTG mounting and i get permission denied for system and vendor (and also Data unable to mount)
EDIT2: Oh cool... despite the errors Magisk got installed! Nice!
Click to expand...
Click to collapse
Nowadays you have to unmount Data and mount vendor (just in case for Vendor) before flashing Magisk. Mounting data does not let Magisk install via TWRP. Follow the this process, same install process with the Mi Note 10, and assuming the Mi note 10 Lite. The reason why is because of encryption.
Update: 5/16/2020
1) Flash lastest TWRP unofficial 3.31-4 mauronofrio using Command prompt using the - fastboot flash recovery [XXXX].img. Note: it's easier to just rename the recover image to "twrp"
2) Then - fastboot boot [XXXX].img to reboot into TWRP recovery.
3) In my experience for thr Mi Note 10 that is, the reboot to RECOVERY did not happened, so instead i pressed - volume up and power button at the same time for thr phone to reboot until you see the boot splash screen, hold the two buttons for another 3 seconds ... and then let go of power button and then TWRP recovery will show up.
4) Ok...so first things first... flash the VBMETA PATCHER like the OP says on first page --> that way you don't lose TWRP after flashing the Rom and MAGISK. After install, reboot to RECOVERY. ***This is only if OP asks to flash VBMETA PATCHER, otherwise skip to Step 5***
5) Now....go to FORMAT DATA (Warning: DON'T use advanced wipe)... Instead, go to the FORMAT DATA, type in yes and press ok. Then go back to main menu, and reboot to RECOVERY again.
6) Now you can access your internel memory when connecting to USB... You can import the two neccesary files --> Xiaomi.EU and MAGISK 20.4. Now Flash the Rom and when flash MAGISK, make sure you unmount DATA and mount VENDOR to avoid flash error. After unticking DATA, you can now install Magisk.
7) Now you can go to REBOOT, and press SYSTEM, and the phone will boot to Xiaomi EU 11 or 12, etc. just follow this process and enjoy your ROM. ?
Note: When updating, flash EU rom and Magisk, dont forget to unmount Data when flashing Magisk. You can probably disable decryption because that is why you can't mount Data when flashing Magisk. **Just don't ask me about it because I normally don't flash Disable Decyption often.

Wmateria said:
Nowadays you have to unmount Data and mount vendor (just in case for Vendor) before flashing Magisk. Mounting data does not let Magisk install via TWRP. Follow the this process, same install process with the Mi Note 10, and assuming the Mi note 10 Lite. The reason why is because of encryption.
1) Flash lastest TWRP unofficial 3.31-4 mauronofrio using Command prompt using the - fastboot flash recovery [XXXX].img. Note: it's easier to just rename the recover image to "twrp"
2) Then - fastboot boot [XXXX].img to reboot into TWRP recovery.
3) In my experience for thr Mi Note 10 that is, the reboot to RECOVERY did not happened, so instead i pressed - volume up and power button at the same time for thr phone to reboot until you see the boot splash screen, hold the two buttons for another 3 seconds ... and then let go of power button and then TWRP recovery will show up.
4) Ok...so first things first... flash the VBMETA PATCHER like the OP says on first page --> that way you don't lose TWRP after flashing the Rom and MAGISK. After install, reboot to RECOVERY.
5) Now....go to FORMAT DATA (Warning: DON'T use advanced wipe)... Instead, go to the FORMAT DATA, type in yes and press ok. Then go back to main menu, and reboot to RECOVERY again.
6) Now you can access your internel memory when connecting to USB... You can import the two neccesary files --> Xiaomi.EU and MAGISK 20.4. Now Flash the Rom and when flash MAGISK, make sure you unmount DATA and mount VENDOR to avoid flash error. After unticking DATA, you can now install Magisk.
7) Now you can go to REBOOT, and press SYSTEM, and the phone will boot to Xiaomi EU 11 or 12, etc. just follow this process and enjoy your ROM.
Note: When updating, flash EU rom and Magisk, dont forget to unmount Data when flashing Magisk. You can probably disable decryption because that is why you can't mount Data when flashing Magisk. **Just don't ask me about it because I normally don't flash Disable Decyption often.
Click to expand...
Click to collapse
this post is gold! Coming back to xiaomi and twrp after 2 years with a huawei, hope to go smooth again with root magisk etc!

cerme said:
this post is gold! Coming back to xiaomi and twrp after 2 years with a huawei, hope to go smooth again with root magisk etc!
Click to expand...
Click to collapse
The root and flash process is basically the same process as the Mi 9T/K20, Mi Max 3, Mi Note 10 since decryption is now a common thing with Android 10... except for the VBmeta.zip, which is new and necessary to flash, as long as you follow the directions..you'll be fine.

Wmateria said:
The root and flash process is basically basically the same process as the Mi 9T/K20, Mi Max 3, Mi Note 10 since decryption is now a common thing with Android 10... except for the VBmeta.zip, which is new and necessary to flash, as long as you follow the directions..you'll be fine.
Click to expand...
Click to collapse
I understand. Last experience ti flash etc was on a mi5, so I have a little bit of rust with that. I do think that following instructions i shouldn't face major difficulties

cerme said:
I understand. Last experience ti flash etc was on a mi5, so I have a little bit of rust with that. I do think that following instructions i shouldn't face major difficulties
Click to expand...
Click to collapse
Same here, i was on the Mi 9T before, I didnt understood the whole new flashing process and carefully updating from EU Rom to AOSP Roms and back, I think i was messing with with thwe wipe and change partition feature (f2fs to ext 4 with an EU Rom) - then the Mi 9T bricked big time. Never recovered after that, luckily got it refunded for it but not many may have that second chance. After learning how to flash propeely and root, ect. I try to help out here when needed and ask too. I just got my Mi Note 10 2 weeks ago and rooted a week ago. So if anything, am willing to help out and repeat the following flash process or any changes in the future and feedback on future Roms.

Was thinking about which rom to use... does xiaomi.eu is stille faster with providing updates? what about the situation with OTA with that.
Now I have the phone with global rom, I want at least flash the EEA rom. But I also know that at some point i want to root, install magisk and get nice features. Still don't want to update manually everytime for an update...

will be watching this thread with much interest..
I recently bought this device (Global version) for use here in Australia.
my first time owning a Xiaomi - quite happy with it so far.
would be nice to have the themeing stuff work properly - I have used MIUI based ROMs back a LOoonggg time ago, in the days of the Nexus S and Galaxy Nexus etc.
used to have a new ROM flashed every couple of days lol, back then. But recent years I've stopped all that, no cool ROMs no snazzy kernels TWRP no nothing not even root lol, very boring!
anyway thanks for posting I hope to try this sometime soon

Hello is there any Eu rom for Mi note 10 lite?

Alisiddiqui75 said:
Hello is there any Eu rom for Mi note 10 lite?
Click to expand...
Click to collapse
yes, there is the EEA ROM you can find on miui website. You can flash it after unlocking bootloader with miFlash

Alisiddiqui75 said:
Hello is there any Eu rom for Mi note 10 lite?
Click to expand...
Click to collapse
I'm not sure if you mean the official ROM or xiaomi.eu.
The link to the official EEA(EU) ROM:
Recovery: https://bigota.d.miui.com/V11.0.7.0.QFNEUXM/miui_TOCOEEAGlobal_V11.0.7.0.QFNEUXM_7926bf9c02_10.0.zip
Fastboot: https://bigota.d.miui.com/V11.0.7.0...EUXM_20200508.0000.00_10.0_eea_4eb1c694c9.tgz
I have yesterday seen a xiaomi.eu Stable build for toco which is based on Global Stable ROM:
https://sourceforge.net/projects/xi...e10LITE_V11.0.4.0.QFNMIXM_v11-10.zip/download
I can not promise that it's working.