Related
Hello dear Forum members,
ive brought a new geniue Mx5 phone.
the phone worked perfectly for a couple of days.
yesterday i forgot to charge it and it completly drained its battery.
in the morning i connected the phone with its original charger and cable and nothing happens.
the phone wont charge and wont start, i've tried different chargers and cables and even connecting it to my comp via USB and still nothing happens..
theres only a led notification light blinking, the phone and the charger are COLD even after a couple of hours connected to the charger..
i also tried to remove the simcard and enter the recovory mode ( tired pushing the volume buttons [+ and -] with the power button, and all the possible combinations and yet nothing...)
i didnt drop the phone and didnt put it under extreme wheater....
what can i do ?
i'd be very thankful to have your advice and ideas
yours,
Elitemagix
Hello!
Have you tried to let the phone charging some hours? When the battery is fully drained you need to do this
Enviado desde mi MX5 mediante Tapatalk
hey iicc thank you for the reply,
after i read your comment i charged the phone for the whole night, and still in the morning nothing happened the notification light is still blinking and the phone is cold
any other ideas???
Ive had the exact same problem, just ordered the phone came today... let it die then charged and now its not charging! I don't know what to do! Did you find a solution?
Hi, I've the same problem with a Meizu MX3. Have you found any solution?
Hold power till stops blinking, should just boot after that.
hi i have this problem too has anyone fixed it ?
I had and have the same issue with my Meizu MX4, with the Ubuntu Touch (OTA-14) OS.
I have changed battery and connector and the problem still remains.
Taking out the battery and charging it externally works, but charging it through the connector and micro-USB plug does not work.
As I suppose other people higher up in this thread have Flyme as OS, it seems to be a motherboard issue to me.
Any solutions found meanwhile?
Since I don't have the necessary equipment at home to perform the external charging, and I have so far relied two times on a repair shop to do so, I would also be interested to get references of universal or Meizu specific external charging equipment.
Thanks.
I had the same problem with my meizu m5c
Idont know if it will work on your meizu models bu i fixed my by just pressing the volume up and power button then it showed “battery lower than 25%,update available” then i pressed restart and placed it on my charger and it was fixed
Hi all, and merry Christmas to everyone.
My S7 edge has started to cause problems with charging up, for some reason when phone is turned on, it will not recognise the USB cable. - I have tried a different cable and plug and it still does not work.
When my phone is turned off, each time I plug in the cable I get a battery with a white lightning symbol and then it just goes off nothing shows as charging . So I suspecting the USB port is OK?
I have erased Delvik cache and erased data this does not change anything.
I do however get VERY VERY slow charging when I leave my phone is download mode.
Anybody got any ideas on what to try before I end up getting back in touch with vodaphone?
Thanks all.
UPDATE :
My phone is now completely dead on 0% battery. When I try to turn on the phone nothing happens as expected with 0% battery.
If I then plug in my charger, I get the lightning symbol for 3 seconds and then it goes off. It gives it some kind of a "charge" and I can turn on my phone.
Once it boots back up, their is no indication to say my phone is on charge and the 0% stays their with a red explanation mark and then my phone turns off. back to the stage I cannot turn it on unless I replug the charger cable and then it goes back in the loop.
sounds like the battery has failed.
check your usb plug if theres any missing pins.
Have you tried using a different charger or charging from a PC USB port ?
Looks to me as if it's your charger or your battery which is faulty.
Yes, I have tried a different Plug and lead we have several in the house. too many samsungs haha.
Sounds to me the battery is faulty as well :/ . Im curious as i thought if the phone is plugged in maybe it should stay on and if i then unplug the phone it would turn off instantly?
I contacted vodaphone , i need to pop into their shop on Monday (i think their open) . they have their own repair center in store which sounds good so no need to send phone off for a repair and they give your a courtesy phone to use as well. If they cannot repair it i should be entitled to a replacement.
Worst thing about these phones when you cannot take battery out :/
Thanks Guys . Hope you all have a nice Christmas Day and get what you all ask for !
on 2nd thoughts,
Although this sounds like a battery issue, of course my phone is totally dead wont turn on. but when i plug in my phone to either, the wall or PC. it will turn on and then back off as if the battery has just died.
If i plug the phone into my PC in DOWNLOAD mode, the phone will stay on but my computer doesn't even respond as if nothing is plugged in. This tells me the problem may be more than just battery?
Just a thought.
I have been unable to boot up my letv 1s device, I have tried everything listed on this forum and other forum to boot up my letv device. Including removing the battery and reconnect them back again.
Recently, I tried to repair it to local phone repair shop, they told me it needs a battery replacement. I bought the battery from aliexpress and replaced them, but it still doesnt boot up.
The repair shop gave up and gave me back the phone and told me the EMMC is weak (I'm not sure about this).
I disassembly the phones and try to figure out the problem, I am guessing the problem might be with the charging board, I am posting the video here hoping someone pro could help me solve the problem. I'm guessing its the charging board because everytime I connect the device to the PC, it kept reconnecting when I tried to FLash a new ROM.
Here are the video of the board kept reconnecting when I tried to connect them to PC
youtube(dot)com/watch?v=N8PMQej9BQc
youtube(dot)com/watch?v=GfLOrslXYRE
Here is the picture of the charging module board
ae01.alicdn(dot)com/kf/UT810zNXElXXXagOFbXw/Letv-X500-USB-Module-Plug-Charge-Board-Microphone-Module-Flex-Cable-Dock-Connector-For-Letv-1S.jpg_640x640.jpg
I really hope someone with more experience could give me more insight about this, thanks.
PS: Please dont ask me to charge the phone again with original adapter and cable, because thats the first thing I tried and I charge it for more than 24 hours already (I even tried to buy a new adapter and usb type-c cable). Oh and I tried connecting to PC with the battery connected also, and it kept reconnecting.
Hi, I also have same problem, but still no solution.
Hi @casper2201 , @softkans and any one with the same issue,
I too had the same issue. It started with the charging rate becoming too slow (1% increment in 25 minutes of charging). I switched off the phone and left to charge for around 35 hours straight and came to find it 79% charged. Then I tried flashing the LOS14 after LOS13 ROMs but in vain. I also fiddled with the Kernel Adiutor, still no help. The charge won't increase when the phone is on so I left it to discharge until it switched off. Then the main issue showed up with red light always on when charging and blank screen.
I also posted about it here, but no one replied. Then I took a leap of faith and went to a local repair shop. He confirmed that it was a hardware problem and the charging module needs to be replaced. Just now I am coming from the shop itself after picking up my phone. Its working fine till now *fingers crossed*. He charged me ₹1300 ($20) which is a little high for the service but it doesn't matter as he was the only one ready to open it as there was the risk of cracking the screen.
So, summing it up, if you have the same problem as that of mine then you need to replace your charging module and I think it will be fine.
Charging module replaced.
Current condition of phone.
The rubber bands will help the adhesive strengthen.
Thanks,
Abhishek
abitshek said:
Hi @casper2201 , @softkans and any one with the same issue,
I too had the same issue. It started with the charging rate becoming too slow (1% increment in 25 minutes of charging). I switched off the phone and left to charge for around 35 hours straight and came to find it 79% charged. Then I tried flashing the LOS14 after LOS13 ROMs but in vain. I also fiddled with the Kernel Adiutor, still no help. The charge won't increase when the phone is on so I left it to discharge until it switched off. Then the main issue showed up with red light always on when charging and blank screen.
I also posted about it here, but no one replied. Then I took a leap of faith and went to a local repair shop. He confirmed that it was a hardware problem and the charging module needs to be replaced. Just now I am coming from the shop itself after picking up my phone. Its working fine till now *fingers crossed*. He charged me ₹1300 ($20) which is a little high for the service but it doesn't matter as he was the only one ready to open it as there was the risk of cracking the screen.
So, summing it up, if you have the same problem as that of mine then you need to replace your charging module and I think it will be fine.
Charging module replaced.
Current condition of phone.
The rubber bands will help the adhesive strengthen.
Thanks,
Abhishek
Click to expand...
Click to collapse
Thank you Abhishek,
Thanks for your reply. I will check it with local service shop.
UPDATE: The problem still persists.
softkans said:
Hi, I also have same problem, but still no solution.
Click to expand...
Click to collapse
Yesterday when I was done with setting up my phone, I put it to charge and the same issue has come again. Its not charging and the "Red light of Death" is back. Today I'm going to the repair shop again and see what he can do now.
I think this is the end and there is no point throwing away more money on the device anymore.
abitshek said:
Yesterday when I was done with setting up my phone, I put it to charge and the same issue has come again. Its not charging and the "Red light of Death" is back. Today I'm going to the repair shop again and see what he can do now.
I think this is the end and there is no point throwing away more money on the device anymore.
Click to expand...
Click to collapse
Is those issue solved? Any update?
Have you tries spft.
casper2201 said:
I have been unable to boot up my letv 1s device, I have tried everything listed on this forum and other forum to boot up my letv device. Including removing the battery and reconnect them back again.
Recently, I tried to repair it to local phone repair shop, they told me it needs a battery replacement. I bought the battery from aliexpress and replaced them, but it still doesnt boot up.
The repair shop gave up and gave me back the phone and told me the EMMC is weak (I'm not sure about this).
I disassembly the phones and try to figure out the problem, I am guessing the problem might be with the charging board, I am posting the video here hoping someone pro could help me solve the problem. I'm guessing its the charging board because everytime I connect the device to the PC, it kept reconnecting when I tried to FLash a new ROM.
Here are the video of the board kept reconnecting when I tried to connect them to PC
youtube(dot)com/watch?v=N8PMQej9BQc
youtube(dot)com/watch?v=GfLOrslXYRE
Here is the picture of the charging module board
ae01.alicdn(dot)com/kf/UT810zNXElXXXagOFbXw/Letv-X500-USB-Module-Plug-Charge-Board-Microphone-Module-Flex-Cable-Dock-Connector-For-Letv-1S.jpg_640x640.jpg
I really hope someone with more experience could give me more insight about this, thanks.
PS: Please dont ask me to charge the phone again with original adapter and cable, because thats the first thing I tried and I charge it for more than 24 hours already (I even tried to buy a new adapter and usb type-c cable). Oh and I tried connecting to PC with the battery connected also, and it kept reconnecting.
Click to expand...
Click to collapse
SP flash tool ,may be your device got hard bricked . in hard brick ,decice just dont do anything at all ,but show red light on charging. i m no pro but if you havent tried it try it.
Open ur phone and look for the battery connector and reconnect it..
It worked for me. As my connector was loose
casper2201 said:
I have been unable to boot up my letv 1s device, I have tried everything listed on this forum and other forum to boot up my letv device. Including removing the battery and reconnect them back again.
Recently, I tried to repair it to local phone repair shop, they told me it needs a battery replacement. I bought the battery from aliexpress and replaced them, but it still doesnt boot up.
The repair shop gave up and gave me back the phone and told me the EMMC is weak (I'm not sure about this).
I disassembly the phones and try to figure out the problem, I am guessing the problem might be with the charging board, I am posting the video here hoping someone pro could help me solve the problem. I'm guessing its the charging board because everytime I connect the device to the PC, it kept reconnecting when I tried to FLash a new ROM.
Here are the video of the board kept reconnecting when I tried to connect them to PC
youtube(dot)com/watch?v=N8PMQej9BQc
youtube(dot)com/watch?v=GfLOrslXYRE
Here is the picture of the charging module board
ae01.alicdn(dot)com/kf/UT810zNXElXXXagOFbXw/Letv-X500-USB-Module-Plug-Charge-Board-Microphone-Module-Flex-Cable-Dock-Connector-For-Letv-1S.jpg_640x640.jpg
I really hope someone with more experience could give me more insight about this, thanks.
PS: Please dont ask me to charge the phone again with original adapter and cable, because thats the first thing I tried and I charge it for more than 24 hours already (I even tried to buy a new adapter and usb type-c cable). Oh and I tried connecting to PC with the battery connected also, and it kept reconnecting.
Click to expand...
Click to collapse
Sir same thing happened with me....phone is not charging red light alert and display blank...please suggest me what can I do
I want my data back from that and its not starting my data is really very important I can't loose that
Help me and tell me what can i do so that my data will not loose and my phone starts
Remove display and disconnect battery. If it won't be alive again that's probably power management unit problem and you won't fix that way.
So earlier this week, I was using my phone with Google Maps like usual. I plugged in my vehicle USB port to the phone to save battery. I had +50% on the phone and 1A USB port. So after like 5 minutes of it being plugged in, my phone just turned off. I tried turning it back on and all I get is the boot screen, then AXON shows, and puff... Phone off again. I tried booting into recovery but phone turns off before TWRP finishes loading. Phone doesn't seem to be charging. Tried different cables and charger to charge phone but nothing. No charge light. Seems like battery is dead because the phone turns off during boot and battery not charging.
Nothing seems shorted. Phone been working great for weeks before this. BL unlocked, Debloated stock, TWRP. Any ideas other than sending back for warranty? Luckily I still have my S7 as primary but I had my Axon for primary for my trip for real world daily use. Needles to say, photos and videos are wanted off the phone.
RoninBlackSoul said:
So earlier this week, I was using my phone with Google Maps like usual. I plugged in my vehicle USB port to the phone to save battery. I had +50% on the phone and 1A USB port. So after like 5 minutes of it being plugged in, my phone just turned off. I tried turning it back on and all I get is the boot screen, then AXON shows, and puff... Phone off again. I tried booting into recovery but phone turns off before TWRP finishes loading. Phone doesn't seem to be charging. Tried different cables and charger to charge phone but nothing. No charge light. Seems like battery is dead because the phone turns off during boot and battery not charging.
Nothing seems shorted. Phone been working great for weeks before this. BL unlocked, Debloated stock, TWRP. Any ideas other than sending back for warranty? Luckily I still have my S7 as primary but I had my Axon for primary for my trip for real world daily use. Needles to say, photos and videos are wanted off the phone.
Click to expand...
Click to collapse
Have you tried going to bootloader mode by holding power and volume down
If the battery has died, then the phone wouldn't turn on is my thinking as everyone you then it on it eats some vattwry
You didn't mention specifically, but have you tried using the factory wall charger & cable and leave charge for like an hour?
Steve - O said:
You didn't mention specifically, but have you tried using the factory wall charger & cable and leave charge for like an hour?
Click to expand...
Click to collapse
Original charger but with certified Micro-b/USB-C cable I've been using for weeks between my S7 and the Axon.
So I left the phone alone for the last few days as I was busy at work and Just didn't feel like messing with it when I got home. I tried to turn the phone on but battery was dead. The quick flash of red led was the indicator trying to power it up. So I used my Samsung charger as it was right there and the original ZTE cable. Phone lights up charging and so I left it as is to go to work. I get home, the green led is lit, so I'm hoping my phone will power up now. Nope, right back to my original issue. Power on phone, gets to Axon logo then eventually turns off or goes black screen. I tried booting into recovery but turns off before fully loading. I try to charge phone again but no led indicator.
So later today, I'm going to try to boot into fastboot and try the new TWRP recovery. Maybe it was enabling r/w on system that caused this. I had downgraded to unlock bootloader and then installed ZADmix. I've been usuing it nonstop for 2 weeks with no issues. I have xposed installed so I know rebooted a few times to get everything working and it never turned off since then.
Really frustrating as that's the phone that had my pictures on it.
Hi @RoninBlackSoul, so what did you end up do ? Have you found any way to bring back the Axon from the dead or sent it back to ZTE for repair / replacement ? Same thing just happened to me, and for me Axon 7 is my primary phone ... if the phone is really dead ... will neve buy another ZTE phone ever !!!
dr3am_r said:
Hi @RoninBlackSoul, so what did you end up do ? Have you found any way to bring back the Axon from the dead or sent it back to ZTE for repair / replacement ? Same thing just happened to me, and for me Axon 7 is my primary phone ... if the phone is really dead ... will neve buy another ZTE phone ever !!!
Click to expand...
Click to collapse
Honestly not sure what did it. After battery drained, plugged it in to charge for 2 or 3 days. Then remembered some note about enabling write access in TWRP (something like that) would cause bootloops. Which is weird, rebooted the phone a few times when it was working.
Any case, I reflahed the recovery/bootstack in EDL and got my phone back. Been working great 5 months now
Sent from my ZTE A2017U using Tapatalk
@RoninBlackSoul, thanks for the feedback.
Got mine working also, my phone was not charging at all. After suddenly rebooting and battery went dead fast, phone was not able to charge for about two days. After which, suddenly started working again, was able to charge and works normally now. This is weird. From my point of view this could be: 1. some sort of auto-protection perhaps or 2. an actual hardware design issue that manifests at random (for some after few weeks or months after purchase). For the 1 point: I was using a non original cable using the original charger, and the USB type c plug was hot at the time the issue occurred. Perhaps due to that heat some protection mechanism manifested that got reset after phone was completely out of juice. Will use only original cable with the Original Fast Charger from now on, as the usb-c plug of the 3rd party cable was fine with a normal charger (non QC3). Hope issue will not manifest again or, Axon 7 will be my last ZTE device ...
dr3am_r said:
@RoninBlackSoul, thanks for the feedback.
Got mine working also, my phone was not charging at all. After suddenly rebooting and battery went dead fast, phone was not able to charge for about two days. After which, suddenly started working again, was able to charge and works normally now. This is weird. From my point of view this could be: 1. some sort of auto-protection perhaps or 2. an actual hardware design issue that manifests at random (for some after few weeks or months after purchase). For the 1 point: I was using a non original cable using the original charger, and the USB type c plug was hot at the time the issue occurred. Perhaps due to that heat some protection mechanism manifested that got reset after phone was completely out of juice. Will use only original cable with the Original Fast Charger from now on, as the usb-c plug of the 3rd party cable was fine with a normal charger (non QC3). Hope issue will not manifest again or, Axon 7 will be my last ZTE device ...
Click to expand...
Click to collapse
I only use good chargers rated for QC or 2/2.4 amps like samsung, anker, aukey. Haven't had issues since. Plus certified type-c cables at all times
Sent from my ZTE A2017U using Tapatalk
I Use My phone normally, And Suddenly 1 day My phone's Battery was dead, When Plugged charger it was showing 100%, I removed charger and try turn it on but phone wasn't turning on, When i plugged in Charger it start charging and showed 100% and I tried to boot but its still stuck at Asus loading screen
I think my phone is brick , guys Need asap Please
Thanks in advance