Related
My son brought me his Nexus S 4g and told me that it doesn't work anymore. He says that he didn't do anything and that it just started doing this on its own. Any help would be greatly appreciated.
When powered on, it quickly goes to the screen with the Google icon and a lock icon. It sits here for about 30 seconds, then reboots to the same thing. If I pull the battery and hold Vol Up and Power when inserting the battery I can get into Fastboot, but when I select Recovery or Reboot, I get the same Google screen.
When I gave him the phone, it was rooted with CWM recovery loaded and a ICS ROM running.
Any help would be greatly appreciated as I have been reading through threads all night long without finding much.
Sounds to me like you need to begin the rooting process again at the "fastboot oem unlock" part. Since you probably don't have anything on your SD card, you might have to push a new recovery via fastboot as well.
Look to this thread:
http://forum.xda-developers.com/showthread.php?t=1078213
for inspiration.
Once you get into the recovery loaded via fastboot, you can get whatever rom that you want onto the SD card by navigating to:
Mounts and Storage > Mount USB Storage
and leave it on that screen while you load the rom onto the SD card.
After that flash the new rom via CWM as normal.
Thanks for the reply. Since I was already unlocked, I followed the steps to return the phone to stock, including flashing boot, system, userdata, recovery and erasing cache. Now when I reboot, it just loops to the Google screen and reboots after 30 seconds. The only difference is that I don't see the lock icon at the bottom or the Google screen.
When I select Recovery, it just goes into the same Google loop. I am going to try to go through the root steps and see what happens. :-(
I was able to unlock the phone, but it will not boot into Recovery. I can get to Fastboot, but I am back to where I started.
When I gave the phone to my son, I had installed SetCPU and configured a profile to throttle the processor down when the screen was off to conserve battery. I am now wondering if he tried to overclock the processor and clicked "set at boot".
Any more suggestions? (please)
Did you successfully flash a recovery.img? Immediately after this you should hit Recovery, then mount the storage, copy a ROM over, do a Full Wipe and flash the ROM.
If all goes well, you'll boot fine. If not, it may be a hardware problem. Try to wipe most of it and lock the bootloader if you need to send it to samsung.
It looks like I successfully flashed a recovery image. I have tried version 5.x and version 3.x. Below is the result of the 5.x command. However when I select Recovery from Fastboot, I go to the Google screen loop.
C:\Program Files\Android\android-sdk\tools>fastboot flash recovery recovery-cloc
kwork-5.0.2.0-crespo4g.img
sending 'recovery' (4136 KB)... OKAY
writing 'recovery'... OKAY
C:\Program Files\Android\android-sdk\tools>
OK, go to http://wonderly.com/bb/CRESPO4G/OEM/GRJ22IMAGES.zip
That will download the GRJ22 stock images of your phone. Unzip them in your PC. Next, use fastboot like this.
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot flash radio radio.img
fastboot reboot-bootloader
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot erase cache
After it finishes you can reboot your phone with "fastboot reboot". This will installed Stock GB 2.3.4 for NS4G. Setup your phone and you will get OTA to 2.3.5. After that you will get OTA again to 2.3.7. Good luck.
By the way, you must let it OTA all the way up to 2.3.7 to get the latest Radio and bootloader version.
Giving it a shot now. I'll let you know shortly how it goes.
Update: Same result. All commands completed successfully, but I end up in the Google logo boot loop. Is there a kernel .img file that I should flash, in case my son tried to flash an unsupported kernel?
C:\Program Files\Android\android-sdk\tools>fastboot flash bootloader bootloader
img
sending 'bootloader' (1536 KB)... OKAY
writing 'bootloader'... OKAY
C:\Program Files\Android\android-sdk\tools>fastboot reboot-bootloader
rebooting into bootloader... OKAY
C:\Program Files\Android\android-sdk\tools>fastboot flash radio radio.img
sending 'radio' (15232 KB)... OKAY
writing 'radio'... OKAY
C:\Program Files\Android\android-sdk\tools>fastboot reboot-bootloader
rebooting into bootloader... OKAY
C:\Program Files\Android\android-sdk\tools>fastboot flash system system.img
sending 'system' (174451 KB)... OKAY
writing 'system'... OKAY
C:\Program Files\Android\android-sdk\tools>fastboot flash userdata userdata.img
sending 'userdata' (18796 KB)... OKAY
writing 'userdata'... OKAY
C:\Program Files\Android\android-sdk\tools>fastboot flash boot boot.img
sending 'boot' (2904 KB)... OKAY
writing 'boot'... OKAY
C:\Program Files\Android\android-sdk\tools>fastboot flash recovery recovery.img
sending 'recovery' (3144 KB)... OKAY
writing 'recovery'... OKAY
C:\Program Files\Android\android-sdk\tools>fastboot erase cache
erasing 'cache'... OKAY
C:\Program Files\Android\android-sdk\tools>fastboot reboot
rebooting...
C:\Program Files\Android\android-sdk\tools>
That included stock kernel.
Man you might just want to fastboot oem lock and send the phone. Those were factory images... if they don't work it means hw issues.
Sent from my Nexus S 4G using XDA
rasengan82 said:
That included stock kernel.
Man you might just want to fastboot oem lock and send the phone. Those were factory images... if they don't work it means hw issues.
Sent from my Nexus S 4G using XDA
Click to expand...
Click to collapse
I agree. If this does not work, send the phone back to Sprint.
I really appreciate y'all trying to help. I will see if Sprint will be kind enough to exchange it. Thanks again.
Yeah, I think the title is enough. The factory images are live now for volantis and volantisg. Maybe we can collect here some first impressions. I am unfortunately not able to flash atm.
https://developers.google.com/android/nexus/images
Flash-all script worked like a charm, setting everything up right now
But it's not February yet.
maarten08 said:
Flash-all script worked like a charm, setting everything up right now
Click to expand...
Click to collapse
Cool man , I'm waiting for your review, , but I'm sure to flash this into my N9 tomorrow . I'm just too eager to wait any longer
Good thing I reverted my n9 back to stock. Will flash tonight. No Ota also.
Flash.sh fail
maarten08 said:
Flash-all script worked like a charm, setting everything up right now
Click to expand...
Click to collapse
Mine fails at sending 'system' (2245234 KB)...
FAILED (remote: data length is too large)
Trying to do a manual flash now... we'll see!
I'll be flashing my 9 tonight too.
I kept my 6 on Lollipop rather than running the preview on it, but yesterday I did flash the preview so that it would use M's auto backup. That way I can flash it this week and not worry about signing into apps.....which is nice during tax season.
PhoenixIce22 said:
Mine fails at sending 'system' (2245234 KB)...
FAILED (remote: data length is too large)
Trying to do a manual flash now... we'll see!
Click to expand...
Click to collapse
Do u have latest fastboot? That error was happening to others because of old fastboot. Otherwise maybe just make sure the hash matches and u have a good download and usb debugging is on.
Sent from my SM-G900V using Tapatalk
Anybody tried flashing yet? I keep getting 'system cannot be loaded' error whilst carrying out manual flash. i.e. fastboot flash system system.img etc etc
I flashed each .IMG file separately, formatted date to remove encryption, flashed TWRP, flashed fed-patcher them FIRE-ICE kernel. Running great here
I was on 5.1.1 (Latest Image). I applied the 6.0 update, now I am just sitting at the black Google Screen and it won't boot. Any suggestions???
Diesel779 said:
I flashed each .IMG file separately, formatted date to remove encryption, flashed TWRP, flashed fed-patcher them FIRE-ICE kernel. Running great here
Click to expand...
Click to collapse
Do u need fed patcher if u flash a kernel that does not force encryption? I thought you wouldn't. Haven't tried it though.
Brian
Sent from my SM-G900V using Tapatalk
Is the installing process for rooted devices the same as for the former builds?
like here:
http://forum.xda-developers.com/nexus-9/general/guide-how-to-unlock-bootloader-flash-t3035153
How To Flash the Factory Image, LONG METHOD
In this method each factory image is flashed separately. This should be used if you have problems with the short method and as you get more familiar with fastboot you’ll be able to flash only the images that you need for your specific requirement. For instance, you might want to only flash the stock recovery if you’re trying to take an ota and you’ve installed a custom recovery. The order that you flash the images is not important.
In the folder you extracted the factory image it’s easiest if you re-name the bootloader image file to simply bootloader and radio. Then open a Windows command window in that folder and use the fastboot commands:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot –w (NOTE, this command does wipe your device. It’s possible to flash the factory image without this command but if you’re going from different revision numbers of android it’s highly recommend to wipe the device)
Now open a Windows command window in the same folder that you extracted the zip file in, the one where you find recovery, system, etc. Then run the fastboot commands:
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img [Note, flashing system takes a long time, so let it do it's thing]
fastboot flash vendor vendor.img
gt43aw said:
Do u need fed patcher if u flash a kernel that does not force encryption? I thought you wouldn't. Haven't tried it though.
Brian
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
You don't need FED patcher if you flash an already un-force-encrypted kernel. FED patcher just takes the stock kernel and un-force-encrypts it.
Haven't updated my flashing VM in a while, so likely not. I know my ADB is 1.0.32, not sure what version of fastboot I have on there. I'm a bit of a Ubuntu noob, so I'm doing lots of web researching, LOL
Be sure to update the bootloader if getting a system partition size error! For M-preview this went from 3.44.1.0123 (LMY48M) to 3.48.0.0135 (confirmed the factory image is still this for MRA58K)... Otherwise you get system partition size errors (BIG update).
I will be making a rooted/no-force-encrypt ROM and kernel as soon as I see the newer manifests on googlesource... I am assuming selinux to permissive is still required for root. Once you have it unpacked:
fastboot flash bootloader bootloader-flounder-3.48.0.0135.img
fastboot reboot-bootloader
Then flash the system and boot images:
fastboot flash boot boot.img
fastboot flash vendor vendor.img
fastboot flash system system.img
DO NOT DO THIS if your device is using a no-force-encrypt kernel! You WILL have to factory reset! Back up OFF the device to a PC or OTG FIRST... Then you can restore.
While flashing SYSTEM it will send the update in 5 chunks - from my device:
target reported max download size of 518205818 bytes
erasing 'system'...
OKAY [ 0.869s]
sending sparse 'system' (499853 KB)...
OKAY [ 26.326s]
writing 'system'...
(bootloader) Device State : Unlocked
OKAY [ 19.701s]
sending sparse 'system' (495930 KB)...
OKAY [ 25.524s]
writing 'system'...
(bootloader) Device State : Unlocked
OKAY [ 20.212s]
sending sparse 'system' (495450 KB)...
OKAY [ 25.732s]
writing 'system'...
(bootloader) Device State : Unlocked
OKAY [ 19.792s]
sending sparse 'system' (443364 KB)...
OKAY [ 22.984s]
writing 'system'...
(bootloader) Device State : Unlocked
OKAY [ 19.222s]
sending sparse 'system' (310634 KB)...
OKAY [ 16.188s]
writing 'system'...
(bootloader) Device State : Unlocked
OKAY [ 12.593s]
finished. total time: 209.162s
NOOB Question:
where can I get the Information if my kernel is "no-force-encrypt kernel"?
I'm using the stock kernel 3.10.40 (28.jul) build LMY48M (rooted)
UDPATE:
in Settings -> security -> enrcypt tablet-> encrypted: means "force-encrypt kernel"?
Deleted
No force encryption stock kernel
For those who want to flash Marshmallow immediately but wanted to keep the device un-encrypted, download this zip, extract the boot image and flash through fastboot.
Hi guys!
After flashing the OOS 3.0 update I cannot load into twrp recovery. So, I again flashed the recovery image from fast boot but while doing the process I got the following error.
downloading 'boot.img'...
OKAY [ 0.710s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.784s
Please help me in installing the TWRP recovery.
You have to use the H2OS-MM Twrp. It is stated in nearly every Installation Guide posted on here and the OnePlus Forum.
https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/
Download H2-MM TWRP(rename as recovery.img for example), and flash it using fastboot
Code:
fastboot flash recovery recovery.img
fastboot boot recovery.img
hemanthmps said:
Hi guys!
After flashing the OOS 3.0 update I cannot load into twrp recovery. So, I again flashed the recovery image from fast boot but while doing the process I got the following error.
downloading 'boot.img'...
OKAY [ 0.710s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.784s
Please help me in installing the TWRP recovery.
Click to expand...
Click to collapse
im getting same problem..
Try flashing Hybrid Recovery (TWRP Based) ---> http://forum.xda-developers.com/oneplus-2/general/recovery-twrp-3-0-2-hybrid-supports-oos-t3362904
Hello I'm trying to flash stock ROM via adb, specifically cust.img, boot.img, system.img, Because I've bricked my phone and it stuck on huawei logo, but when i try to flash, i got the following error "FAILED (remote: Command not allowed)"
Code:
C:\adb>fastboot flash cust cust.img
target reported max download size of 471859200 bytes
sending 'cust' (304183 KB)...
OKAY [195.875s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 195.899s
c:\adb>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (21690 KB)...
OKAY [ 13.671s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 13.694s
c:\adb>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' (460798 KB)...
OKAY [314.622s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 314.665s
Please how I can unbrick my phone and reinstall the firmware
Obs. My bootloader is unlocked and I'm using TWRP recovery
Is your phone really shows Unlocked in red color when it's in fastboot mode?
Was your phone rooted, if yes, with which method?
You should try doing:
fastboot erase cache
fastboot erase userdata
These commands perform the same thing as Factory Reset do.
If it's not working, try to do the "dload" method with your original firmware your phone was shipped with.
Create a folder, called "dload" in your sdcard root, put the UPDATE.APP file of the firmware in it, and without connecting it to PC, press Vol + and Vol - and Power button until it starts flashing the firmware, and see what happens.
In later days, we've got a lot of troubleshooting topic opened up with your problem, the users cannot flash even with unlocked bootloader, and yet, there's no real solution to them.
I suggest that you use Windows 10? If I'm right sometimes this version of Windows cannot be used to flash via adb
I recommend you to use Windows 8.1 or 7 . My best way is of course using Linux
daviddosa said:
Is your phone really shows Unlocked in red color when it's in fastboot mode?
Was your phone rooted, if yes, with which method?
You should try doing:
fastboot erase cache
fastboot erase userdata
These commands perform the same thing as Factory Reset do.
If it's not working, try to do the "dload" method with your original firmware your phone was shipped with.
Create a folder, called "dload" in your sdcard root, put the UPDATE.APP file of the firmware in it, and without connecting it to PC, press Vol + and Vol - and Power button until it starts flashing the firmware, and see what happens..
Click to expand...
Click to collapse
Yes, it shows PHONE unlocked in red name, and I've made the root using an app called kingroot
I've tried to erase cache and userdata using adb but I can't, still got the same error "FAILED (remote: Command not allowed)"
I can't make dload method because I don't have stock recovery, and I can't flash the stock recovery using adb because its keep saying "FAILED (remote: Command not allowed)".
I don't know what to do
sokkoban said:
I suggest that you use Windows 10? If I'm right sometimes this version of Windows cannot be used to flash via adb
I recommend you to use Windows 8.1 or 7 . My best way is of course using Linux
Click to expand...
Click to collapse
I'm using windows 7 is this moment, maybe I try to flash using Linux later
Seems like all the guys with the same problem used KingRoot to root...that is the common thing amongst all.
I dont't think you need the stock recovery to update via the "dload" method, but I'm not sure.
If you don't have your original firmware's UPDATE.APP yet, download it, as well as the Huawei Update Extractor.
Load your file into the program, select ONLY BOOT.IMG, CUST.IMG(if it has one), SYSTEM.IMG and RECOVERY.IMG(optional, if selected, restores original recovery) right click on one, and press Create Flashable Zip.
Copy this to your sdcard and try to flash it.
I did not thest this above method, and don't know it the created flashable zip is really flashable, but I'm running out of possible solutions slowly.
Let us know what happens.
daviddosa said:
Seems like all the guys with the same problem used KingRoot to root...that is the common thing amongst all.
I dont't think you need the stock recovery to update via the "dload" method, but I'm not sure.
If you don't have your original firmware's UPDATE.APP yet, download it, as well as the Huawei Update Extractor.
Load your file into the program, select ONLY BOOT.IMG, CUST.IMG(if it has one), SYSTEM.IMG and RECOVERY.IMG(optional, if selected, restores original recovery) right click on one, and press Create Flashable Zip.
Copy this to your sdcard and try to flash it.
I did not thest this above method, and don't know it the created flashable zip is really flashable, but I'm running out of possible solutions slowly.
Let us know what happens.
Click to expand...
Click to collapse
So I tried to create a flashable zip using the Huawei Update Extractor however, was not possible, it's showing the following message "no suitable files selected. Check profiles.xml"
I've tried also creating flashable zip manually and flash it using TWRP, but TWRP reboot every time I try to flash theses files, that's why I think dload method work only with stock recovery
Hello,
I created the script for flash via fastboot if you want try this method
Extract BOOT.img, Cust.img, Recovery.img, System.img and copy to fastboot folder.(attachment)
Enable developer options and USB debugging
Simply run file FLASH-ALL.bat file
sokkoban said:
Hello,
I created the script for flash via fastboot if you want try this method
Extract BOOT.img, Cust.img, Recovery.img, System.img and copy to fastboot folder.(attachment)
Enable developer options and USB debugging
Simply run file FLASH-ALL.bat file
Click to expand...
Click to collapse
Thanks for the help but this method didn't work, everytime I try to flash the files, I got the same error "FAILED (remote: Command not allowed)” I don't know what is happening my bootloader is unlocked, why I can't flash the files with adb
Code:
target max-download-size: 450MB
sending 'boot' (21690 KB)...
OKAY [ 13.912s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 13.919s
target max-download-size: 450MB
sending 'recovery' (34264 KB)...
OKAY [ 21.963s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 21.985s
target max-download-size: 450MB
sending 'cust' (304183 KB)...
OKAY [191.580s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 191.603s
target max-download-size: 450MB
Sparse-Flash is enabled!
sending sparse 'system' (460798 KB)...
OKAY [366.120s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 366.144s
ROM flashed , if all went well
You must be restarted.
If you leave the recovery to hard reset and restart the phone
Created by sokoban. Thank you for using my release
rebooting...
finished. total time: 0.054s
Pressione qualquer tecla para continuar. . .
This is very strange. May be you really have locked bootloader
Post answer from this command in fastboot mode:
Code:
fastboot oem get-bootinfo
sokkoban said:
This is very strange. May be you really have locked bootloader
Post answer from this command in fastboot mode:
Code:
fastboot oem get-bootinfo
Click to expand...
Click to collapse
This was the result
Code:
C:\adb>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.016s]
finished. total time: 0.016s
As you can see the ADB says that the bootloader is unlocked, but I'm still having trouble
Same issue with Huawei G6-U10
I'm having the same problem with Huawei Ascend G6-U10
Currently running on ROM b146, since it has some issues I was trying to downgrade or upgrade ( there is a b330 out).
I'm not an expert.
This morning I've unlocked the boot loader and then tried to flash a couple of different ROMs and I always get the same error message:
c:\adb>fastboot flash BOOT ./G6-U10verb330/boot.img
target reported max download size of 536870912 bytes
sending 'BOOT' (9696 KB)...
OKAY [ 0.310s]
writing 'BOOT'...
FAILED (remote: Command not allowed)
finished. total time: 0.321s
c:\adb>fastboot oem get-bootinfo
(bootloader) Bootloader Lock State: UNLOCKED
(bootloader) System State: Bootloader in UNLOCKED state
(bootloader) Bootloader Version: 001.001.000
I'm guessing this is not a G6-U10 specific issue so if anyone can give any hint it'll be very appreciated.
Thanks.
I have the same problem with a honor 4x.
Rooted with kingroot. We haven't writing permission in /system. That's why we can't install the recovery. If you try to install superSU and update the binary I guess you get an error.
Now the question is: how we can do to make writeble /system with fast boot?
"mount -o rw,remount -t ext3 /dev/block/xxxxxxxxx /system" in terminal doesn't work...
Similar thing happened to me. Even if command for showing unlocked bootloader said it was unlocked that was false because I used Kingroot previously. Only thing that helped was to unlock the bootloader through fastboot again. Then it was really unlocked and I could flash recovery (in my case TWRP) which before I was unable to.
Diego Sousa said:
This was the result
Code:
C:\adb>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.016s]
finished. total time: 0.016s
As you can see the ADB says that the bootloader is unlocked, but I'm still having trouble
Click to expand...
Click to collapse
Have you tried it with linux yet?
And have you used the Update.APP and dload method?
Maybe a driver problem? Have administrator rights? And debug mode on?
Try to connect your phone (power on) to the pc and wait to be recognized. In cmd type this:
Code:
adb devices
It has to show you your serial number right? If doesn't your device is not being recognized by adb.
Next type:
Code:
adb reboot-bootloader
This will restart your phone into fastboot and now you can type "fastboot devices" like first command and it has to show you your serial number again.
Try rebooting into bl with this, not by plugin in the phone, and install the rom again
Huawei P8 Lite
Hello I have a problem with my phone. I do not know how to hell I fix it.
It says error cannot load system.img but still I can install boot.img and others.
I¨d tryed that "dload" with update.app doesnt work.
phone is Huawei P8 Lite
this is my first time here
Have you tried install it in twrp? You don't have a twrp backup of stock rom?
In this case if you go in the Huawei eRecovery you can restore stock rom and twrp will be overwrited downloading the last rom , i tried it with my p8 lite 2017 .
Tuki2 said:
Hello I have a problem with my phone. I do not know how to hell I fix it.
It says error cannot load system.img but still I can install boot.img and others.
I¨d tryed that "dload" with update.app doesnt work.
phone is Huawei P8 Lite
this is my first time here
Click to expand...
Click to collapse
What are you using to go into fastboot mode? Is it ADB from Android SDK?? It turns out that using ADB from Android SDK lets you flash small files but not large files... I suggest you try flashing the file through Minimal ADB & Fastboot
sokkoban said:
Hello,
I created the script for flash via fastboot if you want try this method
Extract BOOT.img, Cust.img, Recovery.img, System.img and copy to fastboot folder.(attachment)
Enable developer options and USB debugging
Simply run file FLASH-ALL.bat file
Click to expand...
Click to collapse
i have the same issue as well, but just with Cust.img
Hi,
i was running on MIUI 7 on Lenovo A6000 by Sourav_8434 and it was working fine.For my mistake i have updated weekly update i thought it will be normal.But after that my phone is showing a black screen.I can get in to fastboot and i have flashed twrp using 'fastboot flash recovery recovery.img' and when i tried to boot in to twrp(using fastboot flash recovery recovery.img) its giving me an error.
downloading 'boot.img'...
OKAY [ 0.715s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.756s
I have send a personal message to Sourav_8434 and he replied me with some suggestions.He told me he also got the same problem and fix this issue by flashing twrp and pressing 3 buttons same at a time(vol+,Vol-,Power button).But i have tried this several times but its not working for me.If anyone got this situation before please help me. I dont want to go to service center for this problem.
Thanks
bijilidk said:
Hi,
i was running on MIUI 7 on Lenovo A6000 by Sourav_8434 and it was working fine.For my mistake i have updated weekly update i thought it will be normal.But after that my phone is showing a black screen.I can get in to fastboot and i have flashed twrp using 'fastboot flash recovery recovery.img' and when i tried to boot in to twrp(using fastboot flash recovery recovery.img) its giving me an error.
downloading 'boot.img'...
OKAY [ 0.715s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.756s
I have send a personal message to Sourav_8434 and he replied me with some suggestions.He told me he also got the same problem and fix this issue by flashing twrp and pressing 3 buttons same at a time(vol+,Vol-,Power button).But i have tried this several times but its not working for me.If anyone got this situation before please help me. I dont want to go to service center for this problem.
Thanks
Click to expand...
Click to collapse
This happens when you flash wrong version. You must be using the twrp for KK, while MIUI is LP.
So try this one
https://userscloud.com/a25aszfwkn2z
Tried but not working same error is showing.
[email protected]:~/Desktop/TWRP/img$ sudo fastboot flash recovery twrp.img
[sudo] password for user:
Sorry, try again.
[sudo] password for user:
target reported max download size of 268435456 bytes
sending 'recovery' (13204 KB)...
OKAY [ 0.416s]
writing 'recovery'...
OKAY [ 2.022s]
finished. total time: 2.438s
[email protected]:~/Desktop/TWRP/img$ sudo fastboot boot recovery twrp.img
cannot load 'recovery': No such file or directory
[email protected]:~/Desktop/TWRP/img$ sudo fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.417s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.449s
Once i did this before 'fastboot erase recovery.img' is that a problem?
bijilidk said:
Tried but not working same error is showing.
Once I did this before 'fastboot erase recovery.img' is that a problem?
Click to expand...
Click to collapse
Give these a try too
Twtp 3.0.2 http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=55585
Twrp 2.8.6 https://userscloud.com/m4jy6u5chkkp
Cwm http://www15.zippyshare.com/v/j9lHGdJf/file.html
sasukay said:
Give these a try too
Twtp 3.0.2 http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=55585
Twrp 2.8.6 https://userscloud.com/m4jy6u5chkkp
Cwm http://www15.zippyshare.com/v/j9lHGdJf/file.html
Click to expand...
Click to collapse
No hope tried everything..same error.
bijilidk said:
No hope tried everything..same error.
Click to expand...
Click to collapse
Extract "boot.img" from the root of MIUI rom zip and flash that with "fastboot flash boot boot.img"
Then flash the twrp for lollipop
Otherwise, you'll need to flash the firmware through QFIL Downloader
bijilidk said:
Tried but not working same error is showing.
[email protected]:~/Desktop/TWRP/img$ sudo fastboot flash recovery twrp.img
[sudo] password for user:
Sorry, try again.
[sudo] password for user:
target reported max download size of 268435456 bytes
sending 'recovery' (13204 KB)...
OKAY [ 0.416s]
writing 'recovery'...
OKAY [ 2.022s]
finished. total time: 2.438s
[email protected]:~/Desktop/TWRP/img$ sudo fastboot boot recovery twrp.img
cannot load 'recovery': No such file or directory
[email protected]:~/Desktop/TWRP/img$ sudo fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.417s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.449s
Once i did this before 'fastboot erase recovery.img' is that a problem?
Click to expand...
Click to collapse
It seems you successfully flashed the twrp recovery...............
If your recovery is right i.e.according to your previous os
Then just u need to enter into recovery by pressing 3 buttons at the same time....
if not worked then flash another twrp version....
-Sourav_8434
Thanks for the support @sasukay @Sourav_8434 Revert back to Stock lolipop via Lenovo firmware software.
bijilidk said:
Thanks for the support @sasukay @Sourav_8434 Revert back to Stock lolipop via Lenovo firmware software.
Click to expand...
Click to collapse
Please explain how you did it. I'm also stuck with blank screen and only vibration
neerut said:
Please explain how you did it. I'm also stuck with blank screen and only vibration
Click to expand...
Click to collapse
Refer this link. I used the ( THIRD METHOD )Installing the firmware using Lenovo Downloaders.
https://boycracked.com/2015/06/03/unbrick-lenovo-a6000/
So everything is solved here right ? you can close this thread now i think !