Related
I screwed up.
I just experimented with enabling phone mode on that device, after i had it rooted.
so i modified recomipled and signed the framework.apk but i had a typo in my script and the name of the new file is botched up.
My device instantly crashed of course. This is pretty forward to fix once i get access to /system in any way.. also i have a backup of that file on the pc.
Needless to say, without framework it wont boot. I *can* however get into recovery. but there is no adb option in there.
while i am in that menu, the pc recognices the device as "lenovo adb composite" but the adb does not seem to recognize it.
The drivers are set up correctly. the adb worked on the fully running device before the crash. (obviously, since i rooted it that way)
Any suggestions?
and what is the recovery menu point "download cap-firmware" doing exactly?
any help and potential helpfull links very much appreciated, i googled half the night and found next to nothing..
Solved
Solved.
appearantly the decive announces itself slightly differently in this mode.
solution:
The aur version of adb (arch linux) handles this correctly. no drivers needed.
so for all having problems, with this device, my recommendation for now: archlinux or archbang bang live, "packer -S adb" .. "adb shell"
Hi,
you managed to root your A2107A? I've been googling for two weeks and I didn't figure out... Could you please me tell me how you achieve that?
Cheers
da root
FiltroMan said:
Hi,
you managed to root your A2107A? I've been googling for two weeks and I didn't figure out... Could you please me tell me how you achieve that?
Cheers
Click to expand...
Click to collapse
sure thing.
as always first check, that all batteries are charged. (laptop, tablet, ..)
** first you need to enable usb debugging in the menu.
** then plug it in and check on windows that it is recognized properly.
it should show up as "lenovo(or android) composite adb interface" somewhere in device manager.
otherwise tell me, and i'll try to find the proper drivers. (on archlinux it worked without drivers, so if you fail on windows for some reason, that is an option too,)
** after that you need this:
https://dl.dropbox.com/u/31794772/Root_with_Restore_by_Bin4ry_v15.rar
i don't remember where exactly i found this on xda-deverlopers. credits to whoever put that up in the first place, sry.
** choose option 1 in the script.
follow the instructions on the tool. it will ask you at some point to push restore on the tablet, no worries, this is completely intended you wont loose any data if it works right. just leave all fields blank and hit restore.
congrats, you are now rootet. the device might require a reboot and might do that from itself (dont remember)
:good:
ps: doing backup like this first is generally a good idea: http://forum.xda-developers.com/showthread.php?t=1420351
I have the a2107-F will this root process work too?
valravn said:
I screwed up.
I just experimented with enabling phone mode on that device, after i had it rooted.
so i modified recomipled and signed the framework.apk but i had a typo in my script and the name of the new file is botched up.
My device instantly crashed of course. This is pretty forward to fix once i get access to /system in any way.. also i have a backup of that file on the pc.
Needless to say, without framework it wont boot. I *can* however get into recovery. but there is no adb option in there.
while i am in that menu, the pc recognices the device as "lenovo adb composite" but the adb does not seem to recognize it.
The drivers are set up correctly. the adb worked on the fully running device before the crash. (obviously, since i rooted it that way)
Any suggestions?
and what is the recovery menu point "download cap-firmware" doing exactly?
any help and potential helpfull links very much appreciated, i googled half the night and found next to nothing..
Click to expand...
Click to collapse
valravn,
Can you please elaborate a bit on modifying the framework.apk?
The solutions I found require flashing a whole rom which I wouldn't like to do (looks like I got the tablet with the latest FW).
Your help will be much appreciated.
Thanks.
I think i bricked my ideatab. i tried to update the CWM via ROM Manager unfortunately when i restarted the device, it got stuck on the menu showing "Press and select the Country Code". after pressing and selecting one of the choices it will just restart and return to the same menu.
Can you please help me guys? thanks in advance.
Hi all,
I have a serious problem with my G2 which I could not solve: I used the new LG Flash Tool 2014 with stock KDZ file, everything was going just fine till I received an error message that LG server is not available, I disconnected the USB cable by mistake from my G2 and afterward I saw that it was in the middle of flashing process (12% was completed). I turned it off and tried to reach download mode again and nothing!, I'm receiving the "LG" logo and nothing- the screen goes black (it is still on).
I tried also to connect my phone to the computer- I received a list of 13 "new" local disks "H" to "T", only "H" disk is available and it's showing "image" folder with list of files.
I cannot reach "download mode", nothing is working!
I hope this is not the end for my G2..
please help me
Thank you so much!
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
wulsic said:
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
Click to expand...
Click to collapse
Thank you for your reply. I found this on the sticky threads: "[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2".
I installed ubuntu and followed the instructions. when I type the following: "gdisk -l /dev/sde" I receive an error message:
"GPT fdisk (gdisk) version 0.5.1
NOTE: Write test failed with error number 13. It will be impossible to save
changes to this disk's partition table!
Problem opening /dev/sde for reading! Error is 13
You must run this program as root or use sudo!"
My device is not rooted, is this the problem?
Please help me!!
Thanks
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
wulsic said:
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
Click to expand...
Click to collapse
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
NNCa said:
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
Click to expand...
Click to collapse
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
wulsic said:
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
Click to expand...
Click to collapse
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
NNCa said:
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
Click to expand...
Click to collapse
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
wulsic said:
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
Click to expand...
Click to collapse
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
NNCa said:
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
Click to expand...
Click to collapse
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
wulsic said:
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
NNCa said:
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
Click to expand...
Click to collapse
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
wulsic said:
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
Click to expand...
Click to collapse
Yes, I checked it- no response during connecting/disconnecting the device..
Maybe I did a mistake when trying to push those image files.. I guess there is nothing I can do to fix my phone..
Do you have any other suggestions?
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
NNCa said:
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
Click to expand...
Click to collapse
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
wulsic said:
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
Click to expand...
Click to collapse
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
NNCa said:
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
Click to expand...
Click to collapse
Hi, sorry to say but you have unfortunately completely hardbricked your device. It happened to me too however I was able to get it replaced under warranty at no extra cost.
What happened was that when your phone was still detected by linux, you had a chance to recover by flashing the correct partitions to gain access to download mode and from there, flash a KDZ to go back to complete stock. However, the files you used were probably incompatible with your variant which has now corrupted your bootloader sequence. I suggest you read this reply by fizzy177 as well as the rest of the thread: http://forum.xda-developers.com/showpost.php?p=51522304&postcount=118
So right now, you cannot do anything as you have already found out, no computer will recognise that your phone is plugged in. Your phone fails to boot when you try enter the download mode and it just freezes on the splash screen which looks like this: http://www.lg-phones.org/wp-content/uploads/2014/03/image2.png
What's meant to happen is your phone should load past that initial splash screen into this http://www.androiddunya.com/wp-content/uploads/2014/01/LG-G2-DownloadMode.jpg which accepts KDZ flashing and warns the device has been rooted.
So it's a blessing that your phone cannot boot as LG cannot find out you have voided warranty and you will be able to get a replacement free of charge.
Issue was solved- device was fixed under warranty
Hi,
I just want to update you all that my device was fixed under warranty! (motherboard replacement)
Thank you all for help and great support, this is a great forum with great community :good::good:
Hello
From past 2 weeks i am wondering on internet for a solution . Hours and hours of surfing and articles but still
Hope some one solve this issue.
Okay. First i m using LG G2 F320 K update to lollipop . Non rooted. It was working fine . I can transfer files in MTP .
But about a month ago i get an update for my phone . And after some days i need to transfer some files to my phone , i wonder when i connected my phone to computer nothing happened . No notification on mobile for changing PTP MTP option . Also nothing happened in Computer device manager..
From that day i am unable to connect my phone with windows 10. It always charging mobile.
I uninstalled all drivers in device manager and installed from LG website. I updates windows N and NK MTP update from windows for windows 10.
I changed different data cables and different computers and different ports . All stuff i can do. Still no luck.
When ever i plug USB data cable it always put my Mobile on Charging . No notification on Mobile. Also i go in setting > storage> and there is no option in upper right corner to select USB PC connection .
I am in developer mode and debugging mode is on also. Also USB tethering option is Disabled .
Kindly some one help me regarding this.
LG G2 F320K updated to stock Koren lollipop 5.0.1 . Non root.( i updated lollipop in April 2015)
Issue i am facing is no notification for Charging/ MTP/PTP Usb Debugging on mobile notice bar when i attach my phone using USB cord with computer. Also in computer device manager nothing happen. Even i checked on windows 10 , 8.1, 8, 7 .
I remember it was working like charm 4 weeks before I can change MTP PTP or Charge only mode by selecting notification when i attach it to my laptop. I can transfer files can use LG PC suit .
Then i received an software update like 40 mb and i updated my mobile. That i remembered.
After that 2 weeks before i need to transfer some books from laptop to my mobile. When i plugged my device there no notification to select MTP mode . Also there is nothing happened in my windows 10. I looked in task manager. No yellow icon in computer task manager for driver thing.
Laptop is just silent and mobile is just on charging .
Then i go to setting in LG and looked for USB PC connection settings. I wonder there is nothing . Settings > storage > 3 dot in upper right corner.. it suppose to be there . But here is no 3 dot in storage. Then i looked into share and networks in android setting and i found that USB tethering. But its faded mean it is disabled and i am unable to use this feature also.
I tried on different computers different cables , original, but nothing. Always when i plug usb mobile went on charging and in all computers nothing happen in device manager.
USB debugging is on.. I factory reset device 2 times. but useless. Also i uninstall all drivers from my laptop and then reinstall drivers from LG website also i tried google drivers , ABD, different ports. Nothing nothing happen.
Also now if i try put mobile on download mode by turning device off and then push + vol button and then put cord in mobile . No download mode also it went on charging. Well charging from laptop or from charger is okay.
Hope i explain all.
So basically my S4 can be turned on, it's just the problem that I can't access the screen to unlock my phone so that my pc can recognize it and be able to access my photos.
I have spent my whole day on Google and tried to different methods, but still, I can't fix it.
I have tried this http://forum.xda-developers.com/showthread.php?t=2786395
but the "rejected" status is shown in the [email protected] To solve this, I have to press accept the authorization in my phone which is impossible for me as the screen is broken.
Then, I tried to use the "adb pull" command in SDK platform tools, but it is failed as the msg "the device is unauthorized" is shown.
So basically, what can I do now?
I really want to save my photos. They are so valuable to me.
I hope someone here can help me:crying:
Eng is not my first language, I hope you guys can understand what I am saying, Thank you!
can anyone help?:crying::crying::crying:
514179 said:
So basically my S4 can be turned on, it's just the problem that I can't access the screen to unlock my phone so that my pc can recognize it and be able to access my photos.
I have spent my whole day on Google and tried to different methods, but still, I can't fix it.
I have tried this http://forum.xda-developers.com/showthread.php?t=2786395
but the "rejected" status is shown in the [email protected] To solve this, I have to press accept the authorization in my phone which is impossible for me as the screen is broken.
Then, I tried to use the "adb pull" command in SDK platform tools, but it is failed as the msg "the device is unauthorized" is shown.
So basically, what can I do now?
I really want to save my photos. They are so valuable to me.
I hope someone here can help me:crying:
Eng is not my first language, I hope you guys can understand what I am saying, Thank you!
Click to expand...
Click to collapse
by any chance, is the phone locked? because if not, i would recommend trying one of samsungs software to pull the data and transfer onto another phone
Hi, I have a S4 i9505 with a problem, screen broken and no display at all + usb debugging is disabled.
Phone: Not rooted, original software, usb debugging disabled, no display at all
What I want to achieve: restore all my photos / videos on the phone memory, no sd card
What I have attempted:
installed ADB & fastboot based on instructions from http://forum.xda-developers.com/showthread.php?t=2786395
What I need help with:
- When i try to get into recovery mode, i wasn't sure if i am indeed in there since i can't see anything, but in total there's a vibration when i turn on the phone, and another vibration when i release the power up+power+home after pressing them down for about 5 seconds.
- When in command prompt I type adb devices and there was none, and when i type adb shell it says error: device not found
I have ensured all drivers for my phone are installed (even with PdaNetA4180 & UniversalAdbDriverSetup6 from cynanogen) but the error remains. refer to attached image.
I have done extensive search on the forum but still couldn't find any ways to get usb debugging enabled on my crippled phone.
Any step by step guide would really be helpful! Thanks
Ps. Main problem = device not found in adb , usb debugging disabled, screen no display/cracked
What do you want? To recover files? To my knowledge that is not possible.
You would first need to flash a custom recovery for adb to work in recovery.
Then you would need to allow the connection on your device (which you can't do).
Yes I need to recover photos only. Nothing else.
Please kindly guide the steps on how to flash a custom recovery (w/o control of the phone's display or touch)
Thanks.
Your device is shown connected in windows
Why not use the mtp protocol and copy whatever you want
Hi, in the beginning, my phone is locked with a pattern pin.
I read the tutorials and managed to get away with the pattern pin by resetting my phone to factory settings via recovery mode i guess by watching youtube guide.
I didn't knew the photos and all will get deleted off from it, so there's nothing to transfer over when i got MTP working and able to access files inside the phone.
What do you recommend? Would fixing the screen and then using dr fone recovery works? or is there any other way to solve this without getting the phone display fixed? Thanks.
If the photos are deleted by the factory reset then i am sorry to day but you cannot recover them even if you get the screen fixed
bomby481 said:
Hi, in the beginning, my phone is locked with a pattern pin.
I read the tutorials and managed to get away with the pattern pin by resetting my phone to factory settings via recovery mode i guess by watching youtube guide.
I didn't knew the photos and all will get deleted off from it, so there's nothing to transfer over when i got MTP working and able to access files inside the phone.
What do you recommend? Would fixing the screen and then using dr fone recovery works? or is there any other way to solve this without getting the phone display fixed? Thanks.
Click to expand...
Click to collapse
Your photos are gone and there is no way to get them back.
Hi everyone!
I broke my S8 screen completely by dropping it (the phone is still working, not know if the touch still works).
I want to recover WhatsApp backup folder and DCIM folder (i had no backup service enabled, nor samsung account, nor google photo or gdrive), so i thought to go ahed through ADB. Anyway adb list no devices until i unlock my phone through pattern code ( i had no facial/retina/fingerprint mode set).
So i thought to proceed through download mode, flash twrp through odin and access adb through twrp. Anyway it looks like i cannot use odin to flash until i trigger on "OEM Unlock" in developer options which i can't do no more cause of the broken screen.
Is there another way to enable OEM Unlock which doesn't require touch input? Or is there any other way to recover my two folders?
A big thanks for everyone who could help
You can use an otg adapter and a mouse and try to replicate your pattern code and after your in just transfer your files. If you happen to have a second cell phone I would suggest you practise a bit on that screen first so you can replicate the exact movements to unlock your phone. Had an issue with my s6 edge and that worked like a charm.
deveauwelle32 said:
If you don't know how to recover data from S8 phone, just use an Android data recovery software, it can help you recover data from an broken Android device, it is really simple to finsih the recovery process. And you can preview and recover the data from your broken phone, so that you don't lose these data.
Click to expand...
Click to collapse
Yep, that's the best thing you can do.
Cristian.CT46 said:
Hi everyone!
I broke my S8 screen completely by dropping it (the phone is still working, not know if the touch still works).
I want to recover WhatsApp backup folder and DCIM folder (i had no backup service enabled, nor samsung account, nor google photo or gdrive), so i thought to go ahed through ADB. Anyway adb list no devices until i unlock my phone through pattern code ( i had no facial/retina/fingerprint mode set).
So i thought to proceed through download mode, flash twrp through odin and access adb through twrp. Anyway it looks like i cannot use odin to flash until i trigger on "OEM Unlock" in developer options which i can't do no more cause of the broken screen.
Is there another way to enable OEM Unlock which doesn't require touch input? Or is there any other way to recover my two folders?
A big thanks for everyone who could help
Click to expand...
Click to collapse
Log into Samsung Find my mobile. Use your Samsung Account details to log in.
There you will see alot of options that you can perform on your Galaxy S8 remotely.
Use the remotely unlock my device option to unlock your device.
Then connect your phone to the Laptop or PC using data cable and recover the data.
Hope it helps.