I'm trying to reflash Oreo to my Verizon S8. I have downloaded the latest SM-G950U VZW Oreo 8.0.0 firmware using SamFirm. Latest Samsung USB drivers and Odin 3.13.1. However when I run Odin, it fails almost immediately with the output below. I have tried using an older version of Odin along with the modded 3.13.1 version found on XDA and it fails at the same spot. Have tried with all 3 USB ports (2.0 and 3.1) on my laptop and 2 different OEM usb cables and none of them fix it.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4706 M
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I'm having the same exact problem with my Note 8. Have you been able to solve this yet?
AJW6381 said:
I'm having the same exact problem with my Note 8. Have you been able to solve this yet?
Click to expand...
Click to collapse
Yes. I had to use a different computer. Not sure why it mattered, but I used the latest version of Odin, same firmware files, OEM cable, latest samsung usb drivers, and android adb drivers. Didn't change anything besides the PC and it worked. Hopefully it solves your issue too, good luck.
Related
my phone SM N9005 was rooted I unrooted with app and tried to do factory reset
tried to flash cmw twrp nothing worked i was unable to enter recovery after first try of flashing it
i couldnt flash a rom till now
please help me
and now theres now system installed at th moment
was looking for a solution the whole night here
last try that shows up
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N900XXUCMK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N900XXUCMK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_N900SERCMK1_HOME_SER.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N900XXUCMK2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N900AATTBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
thanks for help
KungfuSh said:
my phone SM N9005 was rooted I unrooted with app and tried to do factory reset
tried to flash cmw twrp nothing worked i was unable to enter recovery after first try of flashing it
i couldnt flash a rom till now
please help me
and now theres now system installed at th moment
was looking for a solution the whole night here
last try that shows up
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N900XXUCMK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N900XXUCMK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_N900SERCMK1_HOME_SER.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N900XXUCMK2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N900AATTBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
thanks for help
Click to expand...
Click to collapse
Tru another version of Odin
bekasulaberidze said:
Tru another version of Odin
Click to expand...
Click to collapse
It won't work because he's trying to flash a 4.3 firmware when he already updated his bootloader to 4.4.
what should I do now.
what firmware should i take.
is there something I have to consider while flashing or before.
give me a link please for the files or show me what too take i´m from Germany if this is important
and a bad thing i tried to erase nand before I read the posts here.
thanks hope i´m lucky
KungfuSh said:
what should I do now.
what firmware should i take.
is there something I have to consider while flashing or before.
give me a link please for the files or show me what too take i´m from Germany if this is important
and a bad thing i tried to erase nand before I read the posts here.
thanks hope i´m lucky
Click to expand...
Click to collapse
are you using a correct firmware ?
KungfuSh said:
what should I do now.
what firmware should i take.
is there something I have to consider while flashing or before.
give me a link please for the files or show me what too take i´m from Germany if this is important
and a bad thing i tried to erase nand before I read the posts here.
thanks hope i´m lucky
Click to expand...
Click to collapse
Download the file from your country here and this pit file and flash through odin.
hey_joe said:
Download the file from your country here and this pit file and flash through odin.
Click to expand...
Click to collapse
thanks
now i´ve got a problem in the android system an app shows failure messages always
and how i can flash custom recovery and is there something to care about maybe i need a stock rom first
thanks a lot
KungfuSh said:
thanks
now i´ve got a problem in the android system an app shows failure messages always
and how i can flash custom recovery and is there something to care about maybe i need a stock rom first
thanks a lot
Click to expand...
Click to collapse
Flash latest firmware, After boot, wipe data and factory reset. Then flash the custom recovery that work on KK.
IzArsha said:
Flash latest firmware, After boot, wipe data and factory reset. Then flash the custom recovery that work on KK.
Click to expand...
Click to collapse
Thanks to all
system is working
what custom recovery can I take that it would work properly file and link would be fine thanks
I´m new and don´t know where to find this thanks button
thanks a lot
I've been using Philz on all of my phones. Here you are http://forum.xda-developers.com/showthread.php?t=2567283 @KungfuSh
I am used to rooting my older phones. Just got this Samsung Galaxy S8 today.
However it is loaded with bloatware from T-mobile. I really want to get rid of it..
Any links to how I can remove this, or add another ROM / Stock Firmware without all the bloatware.
Any advice helps.
Thanks again..
Flash the unlocked U1 firmware. Go to updato.com and search for G950U1. There's TMobile versions that have carrier settings but no bloat. There's tons of guides around so I'm not topping one of those out.
Same thing..
So I did flash firmware from the site you listed, found my T-Mobile firmware..
Still has T-Mobile bloatware and tons more of Samsung apps then before....
Which version would have 0 bloatware??? I just want a clean version with no T-Mobile crap.. =[
Did you wipe it afterwards? Did you flash the G950U1 or G950U firmware? Unlocked FW should have no carrier bloat, but will have removable Samsung apps...
Odin Flash, it will restart in Recovery and apply update. Watch for it to restart. Hold Bixby and Volume Up. Wait for the recovery screen to show up, chose Wipe Data/Reset. Then restart
You should be flashing this one: http://updato.com/firmware-archive-select-model?record=2FE5DAF5D55111E7A5F9FA163EE8F90B
Update & FW
I have downloaded SM-G950U1 XAA Firmware, however when I load it into Odin, It gives me 'Wrong Model' or it fails.
I had to download SM-G950U T-MOBILE Firmware, seemed to be the only one that would work for me. Yet still has all the apps, etc.
Im usually pretty tech savy with this stuff, but this is picking my brain. Not sure why its so difficult to have a 'lite' or 'debloated' version.
theSWARM said:
I have downloaded SM-G950U1 XAA Firmware, however when I load it into Odin, It gives me 'Wrong Model' or it fails.
I had to download SM-G950U T-MOBILE Firmware, seemed to be the only one that would work for me. Yet still has all the apps, etc.
Im usually pretty tech savy with this stuff, but this is picking my brain. Not sure why its so difficult to have a 'lite' or 'debloated' version.
Click to expand...
Click to collapse
1.Which CSC are you using? Home? You should be using Non-Home
2.Use this Odin: https://androidfilehost.com/?fid=24591023225177749 Wipe data/factory reset in recovery after
Not using Home
joe3681 said:
1.Which CSC are you using? Home? You should be using Non-Home
2.Use this Odin: https://androidfilehost.com/?fid=24591023225177749 Wipe data/factory reset in recovery after
Click to expand...
Click to collapse
I downloaded the other Odin you had recommended. This is what I got, I did not use the Home.
Additional Note: The lady at T-Mobile store did the upgrade, so would it be because my Android version is more new than the one I am trying to flash? If so, how could I revert this?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Disreguard
I reseated the phone, and rebooted to download mode, Seems like its writing through Odin now!!!!!
Dude THANKS SOO MUCH! Ill let you know if it worked! YOUR THE MAN!!!
theSWARM said:
I downloaded the other Odin you had recommended. This is what I got, I did not use the Home.
Additional Note: The lady at T-Mobile store did the upgrade, so would it be because my Android version is more new than the one I am trying to flash? If so, how could I revert this?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
theSWARM said:
I reseated the phone, and rebooted to download mode, Seems like its writing through Odin now!!!!!
Dude THANKS SOO MUCH! Ill let you know if it worked! YOUR THE MAN!!!
Click to expand...
Click to collapse
Sometimes you just gotta try different cables or ports. That Odin has never not work for me. Hopefully you got it now!
I have a factory unlocked S8 purchased directly from samsung (XAA FW) and am trying to flash the XM (CCT) FW. I cannot get this to work.
S8 log:
CARRIER: XAA
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
System Status: Official
FRP LOCK: OFF
Warranty Void: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B3(1.1.1.1.1) K2 S3
SECURE DOWNLOAD: ENABLE
DID: shows up but don't wish to share
S8 current FW: G950U1UES3CRE2
XM FW i am trying to flash: G950USQU4CRE9
Odin v 3.13.1 (also tried patched version) log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 6752 M
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Following steps from: https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
tritonofg said:
I have a factory unlocked S8 purchased directly from samsung (XAA FW) and am trying to flash the XM (CCT) FW. I cannot get this to work.
S8 log:
CARRIER: XAA
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
System Status: Official
FRP LOCK: OFF
Warranty Void: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B3(1.1.1.1.1) K2 S3
SECURE DOWNLOAD: ENABLE
DID: shows up but don't wish to share
S8 current FW: G950U1UES3CRE2
XM FW i am trying to flash: G950USQU4CRE9
Odin v 3.13.1 (also tried patched version) log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 6752 M
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Following steps from: https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Click to expand...
Click to collapse
Thanks for all the info :good: Btw Your thread is being moved to Q&A
But I am XM CCT user:good: It appears your U1 s8 is on the revision 3 bootloader
So you have to goto sam mobile and flash this firmware here https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/CCT/download/G950USQS3CRE2/220596
which is also bootloader 3 and flash in odin
Now sam mobile is horribly slow so it will take several hours to get it but once you get to this point hollar at me and i will help you out....
TheMadScientist said:
Thanks for all the info :good: Btw Your thread is being moved to Q&A
But I am XM CCT user:good: It appears your U1 s8 is on the revision 3 bootloader
So you have to goto sam mobile and flash this firmware here https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/CCT/download/G950USQS3CRE2/220596
which is also bootloader 3 and flash in odin
Now sam mobile is horribly slow so it will take several hours to get it but once you get to this point hollar at me and i will help you out....
Click to expand...
Click to collapse
I tried another computer and it worked flawlessly. I was doing everything correctly with the correct binaries just that my Surface Pro 4 was not correctly executing where my old core i3 Samsung laptop (series 5) did the job. Both are on windows 10 don't know what the issue was.
tritonofg said:
I tried another computer and it worked flawlessly. I was doing everything correctly with the correct binaries just that my Surface Pro 4 was not correctly executing where my old core i3 Samsung laptop (series 5) did the job. Both are on windows 10 don't know what the issue was.
Click to expand...
Click to collapse
keep in mind usb 3.0s do not play well with s8 and firmware flashing either so could been part of it
Hi i was trying to flash a new rom to my s7 edge so i downloaded what i thought was a good rom to use. However, when i did the flashing using Odin, it now boots directly to recovery, and when i click on the reboot system, it goes to a screen that says SBL ERROR UPLOAD MODE and that pretty much stays there. I am so confused and frustrated now because i just don't know what else to do. I can boot to the download mode, however, all the models i have tried(s7 edge sm-935v) do not get past the FAIL! SHA256 is invalid error. PLEASEE any help would be highly appreciable.
this is the log i get in odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5305 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
No matter what I do I cannot get Odin to move past SetupConnection. I have the Samsung drivers installed, I've restarted my computer and phone a million times, used different USB ports and cables, and every odin version from 3.12.3 to 3.13.3.
This is my log output:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5816 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I flashed the One UI beta forever ago, and want to get the actual official software on my S8 now but it is impossible to get past this step.
https://ibb.co/YXjCqK7
That's an image of my Odin screen
XxxAltaireXxx said:
No matter what I do I cannot get Odin to move past SetupConnection. I have the Samsung drivers installed, I've restarted my computer and phone a million times, used different USB ports and cables, and every odin version from 3.12.3 to 3.13.3.
This is my log output:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5816 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Failing on setup connection will occur on any Odin version that you use.
Does your phone show up on PC ( using file explorer )?
Does it show up with a com port on Odin?
Apart from what you tried ( and other issues that people have had )
If you have smart switch/Kies install, un-install it.
USB cable i'm assuming is a data cable.
USB port try plugging into USB 2 port.
Plug phone directly into PC not any hubs.
Use latest Samsung USB drivers.
Run Odin in administrator mode.
Boot into download mode then reboot back into download mode again.
Maybe turn off any anti-virus programs.
Try a different PC.
Only a few suggestion i can think off at the monent as failing as setup connection is a connection issue between phone and PC not Odin itself.
spawnlives said:
Failing on setup connection will occur on any Odin version that you use.
Does your phone show up on PC ( using file explorer )?
Does it show up with a com port on Odin?
Apart from what you tried ( and other issues that people have had )
If you have smart switch/Kies install, un-install it.
USB cable i'm assuming is a data cable.
USB port try plugging into USB 2 port.
Plug phone directly into PC not any hubs.
Use latest Samsung USB drivers.
Run Odin in administrator mode.
Boot into download mode then reboot back into download mode again.
Maybe turn off any anti-virus programs.
Try a different PC.
Only a few suggestion i can think off at the monent as failing as setup connection is a connection issue between phone and PC not Odin itself.
Click to expand...
Click to collapse
Yes it shows up, and yes it shows up with a com port. No smart switch/Kies. Tried multiple USB ports, both USB 2 and 3. Have latest drivers, ran in admin mode, booted and rebooted. Only thing I haven't tried is a different computer. Though that would still beg the question of what is wrong with my desktop with regards to Odin?
XxxAltaireXxx said:
Yes it shows up, and yes it shows up with a com port. No smart switch/Kies. Tried multiple USB ports, both USB 2 and 3. Have latest drivers, ran in admin mode, booted and rebooted. Only thing I haven't tried is a different computer. Though that would still beg the question of what is wrong with my desktop with regards to Odin?
Click to expand...
Click to collapse
If you can try another computer. I have seen a few issues about connection issues. Some of the common fixes mention in previous post others have had to use a different pc. As to why I am not sure.