higher amp charger Is it good for your battery life? - OnePlus 6T Questions & Answers

Hi all,
I got OnePlus wall Fast Charge Power Adapter from ebay, and i test it with factory cable, i found its higher then the official one
the official one its between 1730 -1800
and the after market from ebay Ebay its between 2700 -2900 my question is the higher amp will hurt the battery life ?
regards

How are you measuring this? Ive found my One plus phones will not charge rapidly with my current measuring device plugged between them and the phone.
Next every single device I have, the battery lasts longer when I slow charge them. (More time on each charge) I charge my devices generally between 0.3-0.5 amps.

OhioYJ said:
How are you measuring this? Ive found my One plus phones will not charge rapidly with my current measuring device plugged between them and the phone.
Next every single device I have, the battery lasts longer when I slow charge them. (More time on each charge) I charge my devices generally between 0.3-0.5 amps.
Click to expand...
Click to collapse
by ampere app, i chat with oneplus they said its should be up to 4000 with the official charger

ananmatai said:
by ampere app, i chat with oneplus they said its should be up to 4000 with the official charger
Click to expand...
Click to collapse
The charger uses 5V 4Amps. You should charge around 3000mAh below 75% after they it slows down.

Puddi_Puddin said:
The charger uses 5V 4Amps. You should charge around 3000mAh below 75% after they it slows down.
Click to expand...
Click to collapse
thank you sir, i got surprise the official one not reaching 2000ma

Related

[Q] Charging

Hey all, haven't been able to find an answer for this. So I'll open a new thread. Now the question. The phone seems to take a long time to charge. Is it possible for me to use my Note 4's quick charger or can anyone recomend a faster charger for this phone? Charging it with Note 4's 2a charger wont damage the battery? Thank you.
I use a 2.1 out and it charges in about an hour and a half
Charging isn't fast and it seems that if the phone gets warm, it draws less power then too - so on a warm day, it can feel like it's taking years.
Would have been nice to have had wireless charging support and/or turbo charging, but alas not.
jonmorris said:
Charging isn't fast and it seems that if the phone gets warm, it draws less power then too - so on a warm day, it can feel like it's taking years.
Would have been nice to have had wireless charging support and/or turbo charging, but alas not.
Click to expand...
Click to collapse
Doesn't the phone support quick charging? But Huawei haven't bundled the appropriate charger?
Doesn't appear to. I've got a Qualcomm Quick Charge 2.0 adapter and it doesn't seem any faster, nor say fast charging.
There's a quirk, when the battery shows 100% it actually still keep charging for another 30 minutes. All tests showed that it took 3hours+ to fully charge it. So quick charge my ass.
So just to update, I have tried charging it with note 4's fast charger and it charges the phone from 20 to 100% in about an hour and a half. Which imo isn't that bad. With the included charger, it took me around 2 and a half hours... Huawei really should have included a charger with higher amp, 1 is way to low.
Winston1989 said:
So just to update, I have tried charging it with note 4's fast charger and it charges the phone from 20 to 100% in about an hour and a half. Which imo isn't that bad. With the included charger, it took me around 2 and a half hours... Huawei really should have included a charger with higher amp, 1 is way to low.
Click to expand...
Click to collapse
It's sadly very common for phones to ship with poor chargers (1A and even lower), but then again - some phones these days come with NO charging adapter, assuming you'll have a ton of them anyway.
I use a 2.1A 5V charger, but I've tried the faster ones (that can output 9V) and it doesn't speed things up, so while it can charge faster with a better PSU, it won't ever charge as quick as many other flagships. Mind you, has the G4 been given full support yet? Likewise, the Z3 is down as supporting Quick Charge 2.0 on Qualcomm's website, but then turns out to be only some variants. Makes me wonder if the Z3+ supports it in every guise.
Not sure what the reasoning is for devices that could support faster charging not actually allowing it, especially if the manufacturer could profit from selling faster chargers separately.
jonmorris said:
It's sadly very common for phones to ship with poor chargers (1A and even lower), but then again - some phones these days come with NO charging adapter, assuming you'll have a ton of them anyway.
I use a 2.1A 5V charger, but I've tried the faster ones (that can output 9V) and it doesn't speed things up, so while it can charge faster with a better PSU, it won't ever charge as quick as many other flagships. Mind you, has the G4 been given full support yet? Likewise, the Z3 is down as supporting Quick Charge 2.0 on Qualcomm's website, but then turns out to be only some variants. Makes me wonder if the Z3+ supports it in every guise.
Not sure what the reasoning is for devices that could support faster charging not actually allowing it, especially if the manufacturer could profit from selling faster chargers separately.
Click to expand...
Click to collapse
I read an article about Huawei declining fast-charge for "battery-purposes" so it can have a longer life cycle. But i think Huawei made an exception about the Huawei Honor 7.
I had an Samsung before and never had problems with fast-charging whatsoever.
My P8 was full in about 2 hours with an 2.1 A charger, while my Samsung Galaxy Mega 6.3 took 1,5 hours.
the screenshoot took from Huawei P8 & P8 Max Launching Event 2015 said that p8 has quick charge at min 21.30 but they didnt talk about that in the event
https://www.youtube.com/watch?v=9uLe3q4wHjE
Here's a quick charger for the Huawei P8 : http://www.amazon.com/Adaptive-Charger-Charging-voltages-charging/dp/9713256832
I did not buy it, but it says it charges at 9V 2.1A
IkeaKast said:
Here's a quick charger for the Huawei P8 : http://www.amazon.com/Adaptive-Charger-Charging-voltages-charging/dp/9713256832
I did not buy it, but it says it charges at 9V 2.1A
Click to expand...
Click to collapse
I think this adaptor isn't safe to p8max.. I will try another charger but only 5v with higher amp that will be safe for sure
Now i charge with stock from 3%to100% in about 2.5 h and the phone didn't tell me to remove charger for more half ahour!!
Sent from my HUAWEI P8max using XDA Free mobile app
sehooo said:
I think this adaptor isn't safe to p8max.. I will try another charger but only 5v with higher amp that will be safe for sure
Now i charge with stock from 3%to100% in about 2.5 h and the phone didn't tell me to remove charger for more half ahour!!
Sent from my HUAWEI P8max using XDA Free mobile app
Click to expand...
Click to collapse
I dont know, its 9V 2.1A, so it is quick charge. But i dont know if it is for MAX. I can charge fast. maybe 1.5h/2h?

Use stock 3 amp charger or other 2 amp charger?

Hey all,
I was wondering what you guys think of the following:
Is it better for your battery to use the stock 3 amp charger all the time or is it better to charge it more slowly with an 2 amp charger? In my thoughts, slow charging is better for the battery. What do you think?
Slower is better.
Tons of articles on the net discussing this!
therock3181 said:
Slower is better.
Tons of articles on the net discussing this!
Click to expand...
Click to collapse
Yeah I've read some, but they are a bit inconclusive. That's why I started this topic.
Edit: thanks for your reply btw!
Use a USB-C 5V 3A charger. If you monitor your charging amps you will only ever see 3A when fully discharged and it then tapers off to less than 0.5 amp when close to full. Suit yourself, but I'm using USB-C chargers designed for the phone.
v12xke said:
Use a USB-C 5V 3A charger. If you monitor your charging amps you will only ever see 3A when fully discharged and it then tapers off to less than 0.5 amp when close to full. Suit yourself, but I'm using USB-C chargers designed for the phone.
Click to expand...
Click to collapse
Since the battery of the 6p degrades very fast, I was interested if people here would think using a 2 amp charger would help stay the battery in better condition.
swa100 said:
Since the battery of the 6p degrades very fast, I was interested if people here would think using a 2 amp charger would help stay the battery in better condition.
Click to expand...
Click to collapse
As mentioned earlier the charging current is not constant and is regulated by the phone. The fast-charging phase of the charging cycle only runs up to ~40% battery capacity and then tapers off. If you doubt this, you can simply install any program that monitors charging current (eg. Accubattery) and see for yourself. See the Accessories sub-forum or the "Charge Time" section here for more information.
v12xke said:
Use a USB-C 5V 3A charger. If you monitor your charging amps you will only ever see 3A when fully discharged and it then tapers off to less than 0.5 amp when close to full. Suit yourself, but I'm using USB-C chargers designed for the phone.
Click to expand...
Click to collapse
v12xke said:
As mentioned earlier the charging current is not constant and is regulated by the phone. The fast-charging phase of the charging cycle only runs up to ~40% battery capacity and then tapers off. If you doubt this, you can simply install any program that monitors charging current (eg. Accubattery) and see for yourself. See the Accessories sub-forum or the "Charge Time" section here for more information.
Click to expand...
Click to collapse
I know that. I'm monitoring the charge speed with accubattery. When under 40% it charges up to 2900 mah, and when it gets higher it goes down to around 2000mah. Average charging speed for last charge (20%-80%) was around 2550 mah. I know that's normal for normal phones, but I was wondering if it would help if I would use a 2 amp charger, to slow the charging down. Only because our nexus 6p stock batteries seem to be quite crappy.
So, I know the charge rate is fine if the battery would be of good quality, but it seems that ours are not.

Charging speed

To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the LG V30 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
Honestly I feel like this is not quick charge 3.0 even though the 835 processor and the device supports it. The charger that comes in the box is only 1.8amps output. Compare that to 2.0amps output with my Galaxy S7 charger and even 3.0amps output on my Nexus 6P charger. So it's not really more than the standard 1.5amp output of most cell phone chargers today and less output than other chargers that come with quick charge compatible phones.
Over all it takes around 1 hour and 20 minutes to charge it from 20% to 100% with the charger it comes with. Keep in mind that's if you're not using it while it charges. If you are using the phone while it charges on about 70% brightness, then about double that time to charger from 20% to 80%. I might try with the Nexus 6P 3.0amp charger later to see if it makes any difference.
So right now I give this only a 6 out of 10 for charging. So 3 stars.
AndroidPurity said:
Honestly I feel like this is not quick charge 3.0 even though the 835 processor and the device supports it. The charger that comes in the box is only 1.8amps output. Compare that to 2.0amps output with my Galaxy S7 charger and even 3.0amps output on my Nexus 6P charger. So it's not really more than the standard 1.5amp output of most cell phone chargers today and less output than other chargers that come with quick charge compatible phones.
Over all it takes around 1 hour and 20 minutes to charge it from 20% to 100% with the charger it comes with. Keep in mind that's if you're not using it while it charges. If you are using the phone while it charges on about 70% brightness, then about double that time to charger from 20% to 80%. I might try with the Nexus 6P 3.0amp charger later to see if it makes any difference.
So right now I give this only a 6 out of 10 for charging. So 3 stars.
Click to expand...
Click to collapse
How did using the different charger workout for you?
AndroidPurity said:
Honestly I feel like this is not quick charge 3.0 even though the 835 processor and the device supports it. The charger that comes in the box is only 1.8amps output. Compare that to 2.0amps output with my Galaxy S7 charger and even 3.0amps output on my Nexus 6P charger. So it's not really more than the standard 1.5amp output of most cell phone chargers today and less output than other chargers that come with quick charge compatible phones.
Over all it takes around 1 hour and 20 minutes to charge it from 20% to 100% with the charger it comes with. Keep in mind that's if you're not using it while it charges. If you are using the phone while it charges on about 70% brightness, then about double that time to charger from 20% to 80%. I might try with the Nexus 6P 3.0amp charger later to see if it makes any difference.
So right now I give this only a 6 out of 10 for charging. So 3 stars.
Click to expand...
Click to collapse
Ran my phone down to 3%. Hooked it up to my QC 3.0 charger. Doing a timed 60 minute charge, I unplugged the phone at 82%
To be honest my last phone was a note 5 I just upgraded to v10 an I personally think that it charges just as fast, I put my my old samsumg fast charger to my USB-C an it registers at fast charging, charges while I play mmorpg, so GG I'm happy
qualitymove13 said:
How did using the different charger workout for you?
Click to expand...
Click to collapse
I only tried it with a Samsung Galaxy S7 charger, which is
2.0 amp output instead of the stock V30 charger at 1.8amp output. So slightly more output.
It looks like no matter what charger you use above 1.8amp output, then the V30 is still going to only use 1.8amp charging rate. I think the phone is programed to limit it. Which is sad because I do not think it charges quite as fast as my S7 Edge.
When I plug the stock V30 charger with the phone at 5% it gives me a ETA of 1 hour 46 minutes. That seems awfully long time for quick charge 3.0 on a battery that is only 3300mah. It should be about 20-25 minutes LESS than that I think. According to LG it should be faster from their graphic at the release show of the V30. See attachment.
Although its possible a future software update could fix this though. So lets hope. I also might reach out to LG and ask them about this.
AndroidPurity said:
I only tried it with a Samsung Galaxy S7 charger, which is
2.0 amp output instead of the stock V30 charger at 1.8amp output. So slightly more output.
It looks like no matter what charger you use above 1.8amp output, then the V30 is still going to only use 1.8amp charging rate. I think the phone is programed to limit it. Which is sad because I do not think it charges quite as fast as my S7 Edge.
When I plug the stock V30 charger with the phone at 5% it gives me a ETA of 1 hour 46 minutes. That seems awfully long time for quick charge 3.0 on a battery that is only 3300mah. It should be about 20-25 minutes LESS than that I think. According to LG it should be faster from their graphic at the release show of the V30. See attachment.
Although its possible a future software update could fix this though. So lets hope. I also might reach out to LG and ask them about this.
Click to expand...
Click to collapse
Does the quick change icon appears? Because that's the time that I see on my G6 with a normal 1.8A...
Killua96 said:
Does the quick change icon appears? Because that's the time that I see on my G6 with a normal 1.8A...
Click to expand...
Click to collapse
The little lightning bolt with a circle around it? Yes.
It also says "fast charging" in the notification instead of just normal "charging" when I plug in a regular charger.
AndroidPurity said:
The little lightning bolt with a circle around it? Yes.
It also says "fast charging" in the notification instead of just normal "charging" when I plug in a regular charger.
Click to expand...
Click to collapse
Don't know then...
Killua96 said:
Don't know then...
Click to expand...
Click to collapse
When you or anyone elses plugs your V30 in at 5-10% battery. Then how long does it say until full?
AndroidPurity said:
When you or anyone elses plugs your V30 in at 5-10% battery. Then how long does it say until full?
Click to expand...
Click to collapse
Don't have a V30 right no, i've just compared the speed with the one seen on my G6, a 5-10% i have 1:50 for full charge without QC, for V30 you'll have to wait someone else...
quick charge feature is available only with original charger or by using power bank too ?
The Galaxy S7 adapter charges only at 9V/1.67A, for 15W of power.
The LG should come with a 9V/1.8A, for about 16W of power. Also, it may only quick charge with the screen off. It will drop to 5-10W with the screen on.
ummm...you should always check the voltage, not only the amps... (voltage multiplied by current equals power).
the best way to check is by using one of those USB thingies which measure V and A.
I'm pretty sure that v30 comes with qc 3.0 charger, so it definitely is a fast charger for that 3300mAh battery.
If I am not mistaken, the supplied charger is Quick Charge 3.0 compliant. But LG limited the charging to just 9V/1.8A, for total power of 16W.
The estimate on my v30+ at 7% battery is 1 hour and 43 min. In 15 min it charged 11% only.
Definitely slower than the galaxy note 4 I had previously.
The charger mine came with is 3amp and takes 45 min to fully charge
AndroidPurity said:
I only tried it with a Samsung Galaxy S7 charger, which is
2.0 amp output instead of the stock V30 charger at 1.8amp output. So slightly more output.
It looks like no matter what charger you use above 1.8amp output, then the V30 is still going to only use 1.8amp charging rate. I think the phone is programed to limit it. Which is sad because I do not think it charges quite as fast as my S7 Edge.
When I plug the stock V30 charger with the phone at 5% it gives me a ETA of 1 hour 46 minutes. That seems awfully long time for quick charge 3.0 on a battery that is only 3300mah. It should be about 20-25 minutes LESS than that I think. According to LG it should be faster from their graphic at the release show of the V30. See attachment.
Although its possible a future software update could fix this though. So lets hope. I also might reach out to LG and ask them about this.
Click to expand...
Click to collapse
bluehawks206 said:
The charger mine came with is 3amp and takes 45 min to fully charge
Click to expand...
Click to collapse
Ok I'm not saying you're bullshittin', but 3A gives 3Ah per 1h, or 3000mAh in one hour and since the V30 has 3300mAh battery, it must take over an hour to fully charge (even if it charges max speed constantly 0-100%), so yeah you're bullshittin'.
BozQ said:
The Galaxy S7 adapter charges only at 9V/1.67A, for 15W of power.
The LG should come with a 9V/1.8A, for about 16W of power. Also, it may only quick charge with the screen off. It will drop to 5-10W with the screen on.
Click to expand...
Click to collapse
BozQ said:
If I am not mistaken, the supplied charger is Quick Charge 3.0 compliant. But LG limited the charging to just 9V/1.8A, for total power of 16W.
Click to expand...
Click to collapse
Yes! Very good point! What I have found is that it does charge pretty fast with the stock charger when you are NOT using the phone at all. Charges around 45% in 30 minutes from my testing. So pretty good!
However when I'm using my phone it takes about double the length of time. About an hour to get the same 45%. So I did a test to see what the heck was going on.
First I bought an Anker quick charge 3.0 18W adapter. So it is rated 2 watts higher than the stock LG charger. The Anker charger has output ratings of
3.6V-6.5V / 3A, 6.5V-9V / 2A, 9V-12V / 1.5A
I also bought a nice braided JSAUX cable rated up to 3Amps to make sure I am also using a cable that does not restrict the charge flow.
My results are about the same with that charger and cable despite it being rated 2 watts higher than stock LG charger. About 45% in 30 minutes when not using the phone and about 45% in 60 minutes when actively using the phone.
I also used an app to measure the charging current when not using the phone and when using the phone, and you are right. LG is for some reason limiting the Amps to only about 1.2A and 5V when using the phone, but then about 2.4A and 5V when not using the phone. I never saw the voltage go higher than about 5.1V. Assuming the app was accurately measuring the charge.
So I guess LG limits the charge when the phone is in use to keep the battery and phone from over heating while processor and display is working more? If so, it's obvious to me that they limit the charge while the phone is in use a good bit more than my 6P or S7 edge did. Hopefully with the upcoming Oreo update the charging rate is increased a little while the phone is in use.
When I had the phone, I measured with a USB meter. I was using a charger that's similar to your Anker, up to 18W.
With the phone or screen off, it charges at 9V/1.8A.
With the screen on, it charges at 5V/2A for 10W. But depending on what you're using the phone, eg. Watching videos or playing games, and your screen brightness, the effective charge is likely lower than 10W.
Since then, I've always developed the habit of not using my phone while charging.

Better mi a1 charger?

Have anyone better and cheap charger what is supported now on oreo? i want to buy it...
Try AliExpress.com
I use a 10w iPad charger and it's great. Charges really fast
TerQQ said:
Have anyone better and cheap charger what is supported now on oreo? i want to buy it...
Click to expand...
Click to collapse
whats wrong with the stock charger?
in oreo update is fast charging feature, then i am searching charger to use that.
Sir i wanted to know which charger should i use to get fast charging after oreo update??
TerQQ said:
in oreo update is fast charging feature, then i am searching charger to use that.
Click to expand...
Click to collapse
Yogesh9694 said:
Sir i wanted to know which charger should i use to get fast charging after oreo update??
Click to expand...
Click to collapse
This has been discussed, it's not charging any faster than it did in Nougat. All they did was add the text to tell you it was fast charging, which to them means charging above 1A. True fast charging would be 50% in less than 30 minutes, definitely this update is not going to do that, no matter what charger you use.
But after oreo update there is a little improvement in charging speed... I charged my A1 in switched off and phones charged in 1hr 35 min from 0 to 100%...and i used the stock charger...
Yogesh9694 said:
But after oreo update there is a little improvement in charging speed... I charged my A1 in switched off and phones charged in 1hr 35 min from 0 to 100%...and i used the stock charger...
Click to expand...
Click to collapse
Doing some very basic math.
3000mAh battery.
Charging rate of 2000mAh
That would equate, if the battery were truly at 0%, and charged truly to 100% full 3000mAh capacity, of 90 minutes, in an ideal world. Of course, there are some things that come into play, such as overhead.
With my USB measuring tool, I am able to see the voltage around 5.10-5.20v, and the amperage around 1.85-1.94A. This is with a Qualcomm QuickCharge 3.0 charger, so I know for certain that it is not doing a higher voltage charge. I can also see that it is not doing a higher amperage charge.
Given this, I will have to see about doing a complete drain on the phone, and then charging, and seeing where 100% is indicated on the phone, in terms of capacity, as my tool can measure the amount sent over USB as well.

Charging speed

To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi Note 5 Pro can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
2 Hour With Stock Charger
I didn't completely check the ratings and time but stock charger DOES NOT fast charge this phone. as the Stock Charger isnt QC2.0 Supported. However this mobile does support QC2.0 but you'll have to test QC2.0 Charger 1st. Not all QC2.0 Chargers work on this mobile. Its a little picky. So go to a shop check QC2.0 Chargers on your mobile. when you get circle Sign on notification bar along side battery then it means that device is fast charging. if not then there will be no circle around the charging sign (Flash sign)
also idt this mobile supports QC3.0 but i dont have tools to check amps volts of charger.
Lenovo's original QC3.0 charger doesnt work on this phone. I've tested. but Motorola's QC3.0 Charger works fine.
my rn5 pro , takes apporx 3 hours to charge completely!
So far I'm a bit slow, a little bit more than 3 hours to completely charge the phone. Might have something to do with the cable.
My current charging setup:
- ANKER 5 port 40W
- a docomo USB cable
Planning to buy a proper 20AWG usb cable and a QC2.0 adapter.
I just bought a Letv charger which supported qc3.0 for about 4$ on taobao
I'm currently on the 9.5.11 build and it takes about 4-5 hours to completely charge the device using stock charger, And it took about 2-3 hours while on 9.2 build.
I wonder if the Mi QC 3.0 based charger would improve the situation for us?
piyush95 said:
I'm currently on the 9.5.11 build and it takes about 4-5 hours to completely charge the device using stock charger, And it took about 2-3 hours while on 9.2 build.
I wonder if the Mi QC 3.0 based charger would improve the situation for us?
Click to expand...
Click to collapse
Slow charge is a known bug in 9.5.11 build. Wait for an update or change ROM
13,2W for me
I recieved 9.2.13 update yesterday and have been noticing significant boost to charging speeds since then...yet to fully charge from 0 so can't comment on total time but as per Ampere, charging speeds are in range of 1500 to 1700 mah
1000 mA max with 5v 2amp and Work Normal Speed with Stock Charger
Approximately 2 hour for charge phone
I use the app Ampere (free in Playstore) to measure power input and with a normal charger (non QC) it shows up to 1600 mAh charging amount and from almost 0 to 100% it is taking 2,5 hours. One question: is there a way to tell if QuickCharge is active?
@Kusie
Look on your"s phone status bar. With normal charging there is thunder icon next to the battery. With QC active, thunder in in circle as far as I remember. Info about active QC should be also displayed in the bottom of your lockscreen
Sent from my flo using XDA Labs
Using my usb inline meter, i'm getting ~6.5v and ~2.2A, with a Tronsmart usb cable and QC 3.0 Truro charger, screen off and about 44% remaining on battery. Will try when the battery is lower some other time.
takes around 2hours to charge 100% using stock charger..
1h 30min with a Quick Charger from Anker.
Cel00 said:
1h 30min with a Quick Charger from Anker.
Click to expand...
Click to collapse
Not possible.
Incogn said:
Not possible.
Click to expand...
Click to collapse
Of Course it's true, why should I lie?
Turned off the Phone at 5% and charged it to 100%....
Cel00 said:
Of Course it's true, why should I lie?
Turned off the Phone at 5% and charged it to 100%....
Click to expand...
Click to collapse
I have no idea why would you do that... But read reviews, no matter what kind of charger you use, this phone only supports qc 2.0 version. From 0 to 100, in 1 hour, you only get like 55%, and in the end it slows down even more, so yes, impossible to fully charge in 1.5h, TECHNICALLY IMPOSSIBLE. You are either lying, or mixed times and got confused. Judging by technical parameters, the best this phone can do should be around 2hours from 0 to 100.
Incogn said:
I have no idea why would you do that... But read reviews, no matter what kind of charger you use, this phone only supports qc 2.0 version. From 0 to 100, in 1 hour, you only get like 55%, and in the end it slows down even more, so yes, impossible to fully charge in 1.5h, TECHNICALLY IMPOSSIBLE. You are either lying, or mixed times and got confused. Judging by technical parameters, the best this phone can do should be around 2hours from 0 to 100.
Click to expand...
Click to collapse
I just posted above that I was able to get QC 3.0 charging rates. Approximately 2.2A (fluctuates +/- 0.1A) and 6.6v (fluctuates +/- 0.2v) using a QC 3.0 charger and Tronsmart cable. Measured using an inline meter, not software.

Categories

Resources