Related
Key Features of CodeRom NexusAce XXKPH 2.3.4:
• A2sd darktremor ready with A2SDGUI (credits to them)
• EXT4 support
• Rooted and Deodexed
• Used custom bootanimation.zip and powersound disabled (update: use nexus S bootanimation)
• Power menu add on: reboot, recovery, download mode (credits to: da_jok3r from 4pda.ru; sk0t and Lovetz)
• Remove some stock apps: SamsungApps, Samsung Stock Clock etc.
• Updated Google Apps & Other: Google Maps, Gmail, Messaging (with theme option), Root explorer, 3 fonts preinstalled (as seen on Galaxy Tab)
• Now with A2SDGUI support
Pre-flashing check list:
• Open KIES and backup your contacts and Bookmarks. (If you have any other app like MYBACK PRO, then you can skip this step)
• Backup your applications using Titanium Backup or any other non-rooted back up apps like App Monster.
• Make sure your phone's battery level is more than 70% before installation.
• Make sure your sdcard was inserted and has been formatted into ext4 partition.
(I am sorry I don’t have time to prepare tutorial to format SD into ext4, once completed. I will place the link here)
Tutorial to flash Samsung Galaxy Ace S5830 to CodeRom NexusAce XXKPH 2.3.4:
• First download CodeRom NexusAce rar file package which contains all the essential firmware flashing tools. Please note that after downloading the rar file, you will have to place the file on desktop and then extract the same. Use below link to download.
*MOD REMOVED* NO WAREZ*
• Check whether extracted folder contains these key files COPPER, APBOOT, MODEM, CODEROMNEXUS, CSC and of course ODIN Multi Downloader v4.38
• Open the Odin Multi downloader v 4.38 file from the extracted files after which you will see that a new window will be popping.
• Now, at this point of time you will have to ensure that the KIES is completely closed and also preferably close all other programs in your computer too so as to ensure that the software update process is not hampered or interrupted in any manner.
• After this you will have to make sure that your phone is turned ON in the download mode, the download mode can be turned ON by pressing Middle Key (OK Key) + Power key and Volume down Key simultaneously before connecting to PC after which the phone will enter in the download mode.
• So, after double checking that the phone has entered in the download mode and connect your phone to your PC, then yellow ID: COM block. Now, next up without changing any other parameters you will have to select the files as they are mentioned below, this is very important step, if any of the file is wrongly entered then you will end up bricking the phone for which we can’t be held responsible in any manner what so ever.
OPS – Cooper_v1.0.ops
BOOT – APBOOT_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
Phone – MODEM_S5830XXKPH_CL260130_REV03.tar.md5
PDA – coderomnexus.tar.md5 (just ignore error message while inserting this file)
CSC – CSC_S5830SERKPH_CL260130_REV03_user_low_true.tar.md5
• After checking the entries as mentioned above, click on the “Start” tab which is just located above the “Select OPS” option. Please note that as soon as you click on the Start tab it will take 5 – 10 minutes to complete the firmware update process and its highly requested on not to interrupt the process as this may brick your phone permanently.
• You will see that after 5 – 10 minutes of time as mentioned above, the updation process is completed and you will have to wait till you see home screen in your phone and also you will have to watch out for Odin as you will see that a Blue colored box will be glowing up as “PASS”
• Now remove your phone safely from PC and go to settings and Locale to change language.
You may like the below links as well.
• Official ClockworkMod 4.0.0.9 Recovery for Samsung Galaxy Ace CodeRom NexusAce XXKPH 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1168417
• Tutorial to setup a2sd in SGA S5830 (CodeRom NexusAce XXKPH 2.3.4):
http://forum.xda-developers.com/showthread.php?p=15724057#post15724057
============================================================
Diliban. P (DP)
Phone: Samsung Galaxy Ace GT-S5830
Version: GingerBread 2.3.4 (KPH)
Rom: CodeRom NexusAce + CRT Animation + a2SD enabled
Recovery: ClockworkMod v.4.0.0.9
excellent tuto for newbies
Maybe put a reminder about flashing this with 80% or more battery..
Thanx alot! Really helpful. Waiting for tut for ext4 frmat'
Sent from my Galaxy ace using Tapatalk
Can i flash this rom via recovery....i'm a newbie here.. thanks
subaash said:
Can i flash this rom via recovery....i'm a newbie here.. thanks
Click to expand...
Click to collapse
U cant.. At least not yet.. For now just stick with Odin..
Thanks for your tutorial...this guide was very usefully for a newbie like me...
And now i think it's a time for launch a new one fresh ROM here (not now actuallyy...maybe tomorrow)
Awesome Rom. Just can't get a2sd swap to work. Everytime i click the enable swap, it says "working" and then goes back to off. Any idea why this occurs?
code28h4p said:
Thanks for your tutorial...this guide was very usefully for a newbie like me...
And now i think it's a time for launch a new one fresh ROM here (not now actuallyy...maybe tomorrow)
Click to expand...
Click to collapse
omg awsum newz ......
Sent from my GT-S5830 using XDA App
Hi izzoe,
I added the battery info in the thread. Thanks for reminding me.
code28h4p said:
Thanks for your tutorial...this guide was very usefully for a newbie like me...
And now i think it's a time for launch a new one fresh ROM here (not now actuallyy...maybe tomorrow)
Click to expand...
Click to collapse
That's good news.. So many good news (and good ROM) for Ace lately.. We are growing..
Hi Diliban ,
Five Stars for your detailed tutorial , will take some screens and attach it to this post so that it becomes more easier for newbies.
You have stated in you tutorial:-
" Make sure your sdcard was inserted and has been formatted into ext4 partition. "
Is this step really necessary , I have flashed with ROM's before without doing this .
I use ODIN to flash and remove SIM and SD card .
Please clarify ...
rajanprash said:
Hi Diliban ,
Five Stars for your detailed tutorial , will take some screens and attach it to this post so that it becomes more easier for newbies.
You have stated in you tutorial:-
" Make sure your sdcard was inserted and has been formatted into ext4 partition. "
Is this step really necessary , I have flashed with ROM's before without doing this .
I use ODIN to flash and remove SIM and SD card .
Please clarify ...
Click to expand...
Click to collapse
Never done this either, altough the only time I flashed my Ace it was the 2.3.3 update. I used ODIN and removed SIM and the SD card aswell. But it's not a custom ROM so I don't know if it really counts...
How can i fix gps problem,i cant switch on my gps with this rom.
Diliban said:
Key Features of CodeRom NexusAce XXKPH 2.3.4:
• A2sd darktremor ready with A2SDGUI (credits to them)
• EXT4 support
• Rooted and Deodexed
• Used custom bootanimation.zip and powersound disabled (update: use nexus S bootanimation)
• Power menu add on: reboot, recovery, download mode (credits to: da_jok3r from 4pda.ru; sk0t and Lovetz)
• Remove some stock apps: SamsungApps, Samsung Stock Clock etc.
• Updated Google Apps & Other: Google Maps, Gmail, Messaging (with theme option), Root explorer, 3 fonts preinstalled (as seen on Galaxy Tab)
• Now with A2SDGUI support
Pre-flashing check list:
• Open KIES and backup your contacts and Bookmarks. (If you have any other app like MYBACK PRO, then you can skip this step)
• Backup your applications using Titanium Backup or any other non-rooted back up apps like App Monster.
• Make sure your phone's battery level is more than 70% before installation.
• Make sure your sdcard was inserted and has been formatted into ext4 partition.
(I am sorry I don’t have time to prepare tutorial to format SD into ext4, once completed. I will place the link here)
Tutorial to flash Samsung Galaxy Ace S5830 to CodeRom NexusAce XXKPH 2.3.4:
• First download CodeRom NexusAce rar file package which contains all the essential firmware flashing tools. Please note that after downloading the rar file, you will have to place the file on desktop and then extract the same. Use below link to download.
*MOD REMOVED* NO WAREZ*
• Check whether extracted folder contains these key files COPPER, APBOOT, MODEM, CODEROMNEXUS, CSC and of course ODIN Multi Downloader v4.38
• Open the Odin Multi downloader v 4.38 file from the extracted files after which you will see that a new window will be popping.
• Now, at this point of time you will have to ensure that the KIES is completely closed and also preferably close all other programs in your computer too so as to ensure that the software update process is not hampered or interrupted in any manner.
• After this you will have to make sure that your phone is turned ON in the download mode, the download mode can be turned ON by pressing Middle Key (OK Key) + Power key and Volume down Key simultaneously before connecting to PC after which the phone will enter in the download mode.
• So, after double checking that the phone has entered in the download mode and connect your phone to your PC, then yellow ID: COM block. Now, next up without changing any other parameters you will have to select the files as they are mentioned below, this is very important step, if any of the file is wrongly entered then you will end up bricking the phone for which we can’t be held responsible in any manner what so ever.
OPS – Cooper_v1.0.ops
BOOT – APBOOT_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
Phone – MODEM_S5830XXKPH_CL260130_REV03.tar.md5
PDA – coderomnexus.tar.md5 (just ignore error message while inserting this file)
CSC – CSC_S5830SERKPH_CL260130_REV03_user_low_true.tar.md5
• After checking the entries as mentioned above, click on the “Start” tab which is just located above the “Select OPS” option. Please note that as soon as you click on the Start tab it will take 5 – 10 minutes to complete the firmware update process and its highly requested on not to interrupt the process as this may brick your phone permanently.
• You will see that after 5 – 10 minutes of time as mentioned above, the updation process is completed and you will have to wait till you see home screen in your phone and also you will have to watch out for Odin as you will see that a Blue colored box will be glowing up as “PASS”
• Now remove your phone safely from PC and go to settings and Locale to change language.
You may like the below links as well.
• Official ClockworkMod 4.0.0.9 Recovery for Samsung Galaxy Ace CodeRom NexusAce XXKPH 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1168417
• Tutorial to setup a2sd in SGA S5830 (CodeRom NexusAce XXKPH 2.3.4):
http://forum.xda-developers.com/showthread.php?p=15724057#post15724057
============================================================
Diliban. P (DP)
Phone: Samsung Galaxy Ace GT-S5830
Version: GingerBread 2.3.4 (KPH)
Rom: CodeRom NexusAce + CRT Animation + a2SD enabled
Recovery: ClockworkMod v.4.0.0.9
Click to expand...
Click to collapse
im newbie.. i just want to ask if i need to update my froyo to gb 2.3.4 before doing this tutorial of this custom rom?.. and this custom rom supported tun.ko.. thanks...
how to ..
Hi Diliban,
I'm running 2.3.4 KPH from Samfirmware.
Can you share with me how to create zip to enable "Power menu add on: reboot, recovery, download mode"
Thanks
Is it necessary to format SD card in ext4 before flashing?
a few questions... i'm kinda new on this.
Before flashing any rom, I must do a wipe of everything .. data... etc right?
and... once I flash the rom, I have to root the device again?
thanks. why was the link removed?
unable to download. link not working. please give a mirror
MPAI said:
Is it necessary to format SD card in ext4 before flashing?
Click to expand...
Click to collapse
The answer is YES.
It highlighted in Pre-flashing check list on post #1.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
I'm trying to help the 10% Who are suffering from "Lag" and not so Buttery Experience with the latest Official Release of JB From SAMSUNG.
This is merely a Guide of How I managed to install LSZ and how to achieve the smooth experience of jelly bean.
The Rooting tools used here are not my work, and I thank everyone contributed into making them for the community
(Thanks to XDA Community for the great efforts and constitutions)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
:: Disclaimer :: This Thread is Explaining solely how I Like to install this ROM or any future ROM to ensure Perfect Combination of Stability and Permanence and everyone might have his own Preferences and methods as well ::
How to Install (Coming from Leaked JB, ICS or GB) :
1. Make a Backup of your Applications and Data using Go Backup or Titanium Backup;which ever you Like.
3. Make a Backup of your Internal Storage to your PC.
Note: Mount Your Internal and External Storage to your PC by Either "USB Utilities" or "USB Switcher App *Root*" in case you only have "Media Server USB".
4. Format your Internal Storage from your PC to : FAT32 with File Allocation Size: 4KBs.
a. Right Click on Internal Storage (Usually the one with 11GB) and select "Format".
b. Select type: FAT32 and Allocation Size :4096 Bytes, Untick Quick Format.
5. Install a Safe Kernel From here:
http://forum.xda-developers.com/showthread.php?t=1901191
6. After Installing the Kernel, reboot into Recovery and Do a Factory Reset, and head to Phills Advanced and Look for "Clean For new System Installation" thing and Click it, after finish, shut down the phone.
To Boot into Recovery, Shutdown the Phone : Hold Vol (+) and Home Button and Power Button, release power button when you see Samsung Logo.
7. Now install JB LSZ using PC Odin, you can find the instructions on this Link:
http://forum.xda-developers.com/showthread.php?t=1424997 (Thanks to Dr.Ketan) .
PS: after the phone restarts, leave it until it finishes the Boot, and installs the applications of the system (The Bloatware) and then until it boots to the home screen.
8. Reboot to Download mode and install the latest safe Kernel for LSZ (search for it by this name: XXLSZ-OXA ) from this link on the third post:
http://forum.xda-developers.com/showthread.php?t=1901191
9. After rebooting when completion, go to Settings on the phone and select Factory Reset, and make sure to select to erase internal Storage.
This will ensure a clean system with Aligned memory storage, will kill LAG factor.
10. After booting again, check for lag, and leave it to settle, and then restore your apps and data, and copy your data from PC to Internal again, and leave it for a while to settle again. should be good to go now!
A side tips:
a. I have Uninstalled all the Bloatware using Titanium Backup, which i believe helped in my cause of presuing better speed of LSZ (Like Google+,G music, G magazines, etc).
b. Formatting the External SD card is a must also, to make sure Media Scanner is not having errors on it.
This Hopefully should give you the best Install procedure for LSZ, i have had many lags but after doing this method, I have achieved superb speed. Though, expect few to little lags on the first few boots until the system finishes Media Scanner and making cache files etc.
How to Root LSZ?
1. Install This Kernel using Odin in case you don't have it : XXLSZ-OXA from this link on the third post:
http://forum.xda-developers.com/showthread.php?t=1901191
2. Reboot into Recovery and install the File I have attached here, and you will have root ready, Good luck.
Note: download the zip version of the kernel LSZ to external sd and flash it using stock recovery to avoid yellow triangle if you want.
To clear Yellow Triangle and Counter count on Galaxy Note, please download "Triangle away" by Chain Fire, from this Link and rest it:
http://forum.xda-developers.com/showthread.php?t=1494114
I have gathered this Information though my experience with my Galaxy Note and the information I have found and the tools available on XDA, I don't claim owner ship of any of the Root Tools or Rom it self, If you need help I would try to help you if i can. Best regards
Cool.
Posts like this are always the best world when it comes to help more people in a simple way.
Fortunately, my installation went pretty well, just like the JB running after that.
Just helping the troubled minds and glad you had no issues.
You know that there is a PIT file for Odin which formated all memory on Note? And it can be done in JB installation process,all at once...
Sent from my GT-N7000 using Tapatalk 2
zviki said:
You know that there is a PIT file for Odin which formated all memory on Note? And it can be done in JB installation process,all at once...
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
The Pit method can be risky, and ive learned from my older device to not play with Pit files much,... )
AW: [Guide] Installation Tips for LSZ + Rooting Methods [Lag Free]
Sorry, but 2x factory reset, and formating storage? Flashing a kernel with Odin, that will lead to a triangle and increased flash counter? Correct me, If I'm wrong.
Cheers, Markus
in OP, is steps 4 & 5 really necessary?
By what the Dr says here:
http://forum.xda-developers.com/showpost.php?p=38183950&postcount=5587
I would think not..
Perfect way to flash LSZ
Yes brother, for LM5 there is no issue, but in LSZ if you dont do it as in OP you may get bootloops.. i tried..
if you use mobile odin for flashing lsz then need to flash bootloader separately as mobile odin cant flash bootloader.
My way of perfect installation is
Flashing instructions
1. flash any 4.x Philz Kernel
2. reboot recovery
3. Go to Philz settings
4. Select Clean Before Flash new rom
5. Wipe Dalvik Cache
6. reboot to download (advanced)
7. flash the new in using PC Odin (select PDA tab and browse .tar.md5 file)
for just rooting flash supersu as in OP
for a safe kernel, flash Philz LM5 Kernel.
if anyone want to try LSZ custom or cwm versions then first flash any 4.x philz kernel and
Go to Philz settings
Select Clean Before Flash new rom
Wipe Dalvik Cache
Flash rom, then after rom installation reboot to recovery and do flash bootloader separately in cwm.
jeffs99 said:
in OP, is steps 4 & 5 really necessary?
By what the Dr says here:
http://forum.xda-developers.com/showpost.php?p=38183950&postcount=5587
I would think not..
Click to expand...
Click to collapse
very useful. Thanks
Sent from my GT-N7000 using xda premium
installation
i instaled the ROM usig Mobile odin Pro which rooted the device...even got all the application, SMS, contacts back but i guess i am not on (safe Kernel)Philz kernel....everything is good for me except the battery is draining like 1% every min....no air view..or smart rotation..guessing its not included for galaxy note 1......while browsing through EFS to external card folder it shows it to be empty...but My files shows the external card content..through Storage/external card...and camera shortcut through lockscreen seems to be not working for me...what troubles me the most is the battery problem....i need a good batter life....as i am constantly reading books on the note...is there any workaround for the battery?
Gugelhupf said:
Sorry, but 2x factory reset, and formating storage? Flashing a kernel with Odin, that will lead to a triangle and increased flash counter? Correct me, If I'm wrong.
Cheers, Markus
Click to expand...
Click to collapse
Yes bro, to get rid of the triangle just install 'triangle away' and get rid of it, but this will ensure 100% no bootloops.
Sent from my GT-N7000 using xda premium
prajjwal said:
i instaled the ROM usig Mobile odin Pro which rooted the device...even got all the application, SMS, contacts back but i guess i am not on (safe Kernel)Philz kernel....everything is good for me except the battery is draining like 1% every min....no air view..or smart rotation..guessing its not included for galaxy note 1......while browsing through EFS to external card folder it shows it to be empty...but My files shows the external card content..through Storage/external card...and camera shortcut through lockscreen seems to be not working for me...what troubles me the most is the battery problem....i need a good batter life....as i am constantly reading books on the note...is there any workaround for the battery?
Click to expand...
Click to collapse
I believe you should do a clean install to fix your drain issue, as i had that while upgrading from ics to jb with out wipe, now my drain is very minimum like this image.
Sent from my GT-N7000 using xda premium
thanks for the guide.
was about to move from leaked JB rom to the new official release.
already did a nandroid backup
i'll make sure to use a safe kernel.
Welcome
I am a beginner of rooting my Note. I have updated my Note to 4.1.2 from the Samsung Rom
I would like to ask if my note baseband version is N7000XXLSO and the build number is JZO54K.N7000ZSLM5
then i can use your method to root my Note Thank You very much!
can you post the list of all the bloatware apps.?
tangoscar42 said:
I am a beginner of rooting my Note. I have updated my Note to 4.1.2 from the Samsung Rom
I would like to ask if my note baseband version is N7000XXLSO and the build number is JZO54K.N7000ZSLM5
then i can use your method to root my Note Thank You very much!
Click to expand...
Click to collapse
Yes you can use. Better, download the zip version of the kernel LM5 to external sd and flash it using stock recovery to avoid yellow triangle.
tangoscar42 said:
I am a beginner of rooting my Note. I have updated my Note to 4.1.2 from the Samsung Rom
I would like to ask if my note baseband version is N7000XXLSO and the build number is JZO54K.N7000ZSLM5
then i can use your method to root my Note Thank You very much!
Click to expand...
Click to collapse
Yes, you can use my method very safely to root your device.
nokiamodeln91 said:
Yes you can use. Better, download the zip version of the kernel LM5 to external sd and flash it using stock recovery to avoid yellow triangle.
Click to expand...
Click to collapse
I have updated the OP with your word about the .zip version of the Kernel file, should have included it in the first place, thanks a lot lad.
YuE0529 said:
can you post the list of all the bloatware apps.?
Click to expand...
Click to collapse
There are many, But I will tell you which ones I removed:
Google+
Google Magazine
Google Movies
All German Apps
Allshare Play
Music Hub
Video Hub
Readers Hub
Learner Hub
Crayon physics
Polaris Office
Maps (I like to download latest one from Market as this one is old )
YouTube (I like to download latest one from Market as this one is old )
Swype Keyboard
Those all That I can remember at the moment.
ZTE has turned out a new SD Card upgrade today, see for e.g. European Standard / V1.1: http://www.ztedevices.com/support/smart_phone/cba40ed6-d3ab-44c0-bdee-3a15803dc187.html
Thank you for the info
I flashed it now.
FYI - all personal settings are resetted
is there any info about changelog?
(could not find any changes to prior 1.1
is there any possibility to save / backup settings & apps?
(like titanium backup on android?)
thank you in advance
br
ps:
still no POP3 mail
is car navigation possible with "here maps"?
What is diference between this to ver.;
OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.1)
OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.0)
xtimex said:
What is diference between this to ver.;
OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.1)
OPEN(European Standard) SD card upgrading instruction & software package(ebay)-2376270OPEN_EU_DEV_FFOS_V1.1.0B02(for V1.0)
Click to expand...
Click to collapse
Hello,
Both zips upgrade to V1.1.0B02
depending on your existing version you have to use the depending zip file
- if you already upgraded official V1.1 => first file
- if you run 1.0 => second file
br
tnx
Ok
I need to do that, but this updates is only for European devices, I tried to update from Colombia and Movistar's carrier and I couldn't !!
[Letv x500] NO Option Update/NO app "System Update" [Garbage Webshop Rom]
--------------------------------------------------------------------------------------------------------
People you are not on stock but on garbage webshop rom.
My new phone arrived in the same state
You dont have app "System Update" and you can not do OTA update.
Luckily for you, there are two options:
---------------------------------------------------------------------------------------------------------
I) Option One
Crossing on Stock ROM and make manually (Offline) update:
1. Download the update package to your PC, and rename as “update”
http://bbs.letv.com/zt/eui/le_1s.html
Download last (S) stable version.
For example: (S1_x500-CN-OP-DBXCNOP5501001211S-5.5.010S)
2. Connect phone to PC via USB cable
My computer-> click Le1s-> Phone storage
3. Drag and drop the update.zip file to the root directory of the phone (Phone storage)
4. Safely eject phone from your PC and switch off the phone
5. Use recovery (press and hold power button + up volume) and select update.zip
6. Start Install
-----------------------------------------------------------------------------------------------------------------
Note-In this way you crossing to x500 Stock ROM who has a lot of Chinese bloatware!
Chinese bloatware removing themselves!
This Stock ROM normally has English.
------------------------------------------------------------------------------------------------------------------
II) Option Two
Crossing on Custom ROM
1. [Le 1S] x500 Custom ROM by BB72 [Multilanguage]
http://forum.xda-developers.com/leeco-le-1s/development/custom-rom-letv-x500-bb72-multi-t3347031
--------------------------------------------------------------------------------------------------------------------
Note-In this way you crossing to x500 Custom ROM
without Chinese bloatware!
This Custom ROM is multilanguage and normally has English.
--------------------------------------------------------------------------------------------------------------------
The choice is yours
I would never want to influence your choice
P.S.
I chose Custom ROM
Author of this tutorial: laikexpert
Reserved
Same situation
I've downloaded the ROM and renamed it. Added it to the phone's directory. But There's no update option under recovery mode! please help!
If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeEcoUnofficial
Thanks all of u
** I only tester, and used N915K (not S/L)
My device running smooth with this rom. No lag, no apps KR.
If you wanna remove app. I recommend you use Root Unistall (check playstore). Dont use titatinium backup.
** Backup your data on internal storage to microsd card
**Bug**
- touchwiz launcher home screen (onto widget) force close
(must use this laucher replace https://play.google.com/store/apps/details?id=com.s9launcher.galaxy.launcher)
ROM: Thanks to @ gem-flash forum
CF auto root: Thanks to @Chainfire
TWRP: Thanks to @micky387
For someone use N915 S / L .
- Flash CF auto root (must use n915S / n915L depend your phone)
You can test this rom. and report to this thread
Guidelines
1. Full wipe advance (select all except microsd card )
2. Move to Download mode
3. Flash file rom by Odin3
4. Waiting device reboot about more than 10 minutes . If it cannot load logo samsung then need remove battery and try to open again.
5. After you setup setting your phone ......
6. Move to Download mode again
7. Flash file CF-Auto-root by Odin3
8. Waiting device reboot about more than 5 minutes
9. Now you got Supersu on your phone
10. Move to Download mode
11. Flash file TWRP by Odin3
12. Done
Link download all files (except Odin3) at here MEGA
Thanx, any screenshots?? Which android version is this please.
Alboooz said:
Thanx, any screenshots?? Which android version is this please.
Click to expand...
Click to collapse
Version 6.0.1
howie_ddt said:
Version 6.0.1
View attachment 4670595
View attachment 4670596
Click to expand...
Click to collapse
Thanx, it doesn't seem is removed knox from it, but i will try when i got some time.