Nokia TA-1060 Unbrick help - Black screen boot loop - Nokia 6 Questions & Answers

Hi,
I'll try to keep this short, this is how I've ended up where I am:
Flashed with TWRP
Successful root of phone
System running fine with root
Wipe data/cache/factory reset in TWRP
Bootloop into recovery
Attempt to fix by flashing boot/system/vendor/recovery failed (using images that were successful originally)
Attempt to reflash using OST stuck on reflashing service bootloader
Flashed wrong version of CWM recovery
Phone now stuck in black screen boot loop. Phone turns on (vibrates) but screen stays black, repeats every ~10-20s
Any help would be greatly appreciated.

Related

Can only boot to bootloader

So I unlocked my bootloader on my Huawei P8lite ALE-L21 yesterday and flashed twrp recovery. Trough twrp I tried to root the phone by flashing.. It sort of failed and I got into a bootloop.. Then I tried to get out of the boot loop by trying methods I found online. Other's did nothing so I tried to flash boot, recovery, system images.. Now it won't get in a boot loop but I get the huawei logo for 3 seconds and the phone turns off. I can only boot in bootloader.. Is there any way I could still make it work or is it completely lost now?
Update: I flashed Boot.img and recovery.img again and now im stuck at the point where huawei logo appears, but not turning off phone. I am also able to get to recovery now.
Update2: I flashed a different system.img now and suddendly the phone started working.. Problem solved I guess.
pekka431 said:
So I unlocked my bootloader on my Huawei P8lite ALE-L21 yesterday and flashed twrp recovery. Trough twrp I tried to root the phone by flashing.. It sort of failed and I got into a bootloop.. Then I tried to get out of the boot loop by trying methods I found online. Other's did nothing so I tried to flash boot, recovery, system images.. Now it won't get in a boot loop but I get the huawei logo for 3 seconds and the phone turns off. I can only boot in bootloader.. Is there any way I could still make it work or is it completely lost now?
Update: I flashed Boot.img and recovery.img again and now im stuck at the point where huawei logo appears, but not turning off phone. I am also able to get to recovery now.
Update2: I flashed a different system.img now and suddendly the phone started working.. Problem solved I guess.
Click to expand...
Click to collapse
Probably issue with your downloaded image make sure you md5 check them

[HELP] Boot loop between TWRP and Logo scene

so try to flash new OTA rom but failed(flash from the first version to 5.0.2), I formatted my phone data and after i do that for 2 times the boot loop begin...
after-that I try to install new firmware but still didn't work, and stuck within loop between boot loader and TWRP(3.2.1 bluspark)
pls help me to fix this :crying::crying:
things work fine:
-fastboot/bootloader
-TWRP recovery
Probs:
-stuck in boot loop

SM-T580 Softbricked, Currently on reboot loop, can't flash any stock firmware

Here's what happened:
1. flashed wrong twrp version for 8.1 oreo, used correct CF-auto root
- tablet booted to stock recovery screen a few times but i figured it was part of the process so I just rebooted
-ended up getting a failed identification verification
-i know the auto root worked because my warranty is void :silly:
2. reset my tablet from the failed verification screen
-eventually got myself to a blue erasing screen loop
-flashed twrp again and got myself to a point where booting into recovery resulted in glitchy lines
3. attempted to factory reset from reboot with adp
-not sure if it worked tbh
-also tried to reboot to recovery screen and that didn't really do anything
4. found and installed the proper version of twrp (3.2.3-4)
-now stuck in feedback loop that occasionally shows the twerp screen so i know something's right
-won't boot to recovery screen but will boot to download page
-doesn't show up in adp devices during this loop
-- have CONTINUOUSLY tried flashing firmware (I've tried 6.0, 7.0?, and 8.1) none of them have worked, sporting some variant of secure check fail (PIT, bootloader, or RADIO)
-- have tried the mod here but it fails after param.bin and i can't use it directly after auto root without rebooting because it gets stuck on setup connection
-- most likely not a hardware problem because i had this tablet for basically a day before i did this to myself
--OEM is unlocked, not that i could change it even if it wasn't
---is there anything that anyone would recommend trying before i take this to geek squad (who may not help me but i'm still going to try) or should i just cry myself to sleep over wasting $300 :crying::crying:
abstractartemis said:
Here's what happened:
1. flashed wrong twrp version for 8.1 oreo, used correct CF-auto root
- tablet booted to stock recovery screen a few times but i figured it was part of the process so I just rebooted
-ended up getting a failed identification verification
-i know the auto root worked because my warranty is void :silly:
2. reset my tablet from the failed verification screen
-eventually got myself to a blue erasing screen loop
-flashed twrp again and got myself to a point where booting into recovery resulted in glitchy lines
3. attempted to factory reset from reboot with adp
-not sure if it worked tbh
-also tried to reboot to recovery screen and that didn't really do anything
4. found and installed the proper version of twrp (3.2.3-4)
-now stuck in feedback loop that occasionally shows the twerp screen so i know something's right
-won't boot to recovery screen but will boot to download page
-doesn't show up in adp devices during this loop
-- have CONTINUOUSLY tried flashing firmware (I've tried 6.0, 7.0?, and 8.1) none of them have worked, sporting some variant of secure check fail (PIT, bootloader, or RADIO)
-- have tried the mod here but it fails after param.bin and i can't use it directly after auto root without rebooting because it gets stuck on setup connection
-- most likely not a hardware problem because i had this tablet for basically a day before i did this to myself
--OEM is unlocked, not that i could change it even if it wasn't
---is there anything that anyone would recommend trying before i take this to geek squad (who may not help me but i'm still going to try) or should i just cry myself to sleep over wasting $300 :crying::crying:
Click to expand...
Click to collapse
Flash twrp, FORMAT (not wipe) data, install Magisk.
Reboot.
ashyx said:
Flash twrp, FORMAT (not wipe) data, install Magisk.
Reboot.
Click to expand...
Click to collapse
So just keep flashing it until i can boot to twrp recovery basically?
abstractartemis said:
So just keep flashing it until i can boot to twrp recovery basically?
Click to expand...
Click to collapse
What's stopping you boot to Download mode?
ashyx said:
What's stopping you boot to Download mode?
Click to expand...
Click to collapse
I can boot to download mode but i can't boot to recovery mode after flashing twrp. When I try I just get stuck in a reboot loop, so I can't try to boot to recovery from adp either.
abstractartemis said:
I can boot to download mode but i can't boot to recovery mode after flashing twrp. When I try I just get stuck in a reboot loop, so I can't try to boot to recovery from adp either.
Click to expand...
Click to collapse
If you can flash twrp then not booting to twrp must be pilot error.
It MUST be done immediately after flashing in odin.

Can't flash recovery, boot into recovery or do anything.

Hello!
I just repaired the display of my OP2 and when turning it back on it went straight into bootloop. Only showed the OP Logo and android on the bottom. ADB obviously doesnt work and tried to all partitions via fastboot to get fresh start. After completely resetting I unlocked the bootloader again just to be sure. Then I tried to flash twrp 3.2.1-0. it say dtb not found error. I tried a twrp 3.0.0-0 and it said succesfully flashed but after automatically rebooting the screen just turns black. I can the into fastboot mode or into bootloop can't do anything else. I also tried the MSM8994DownloadTool.exe but it just returns into bootloop again or turns black.
Help pls

My SM-T515 is stuck on the TWRP logo and i can't do anything.

So, I wanted to root my device using magisk but i failed and tried to install TWRP. After installing it, I restarted my device and tried to get into TWRP only to get stuck in the logo screen. All I can do is restart the device, I can't get into download mode and stuff like that, nothing works at all.
I left the tablet overnight and it is still stuck on the logo screen, any help?
EDIT: I have managed to break out of the boot loop by following petapen's instructions inhttps://forum.xda-developers.com/galaxy-tab-a/how-to/galaxy-tab-sm-t510-stuck-twrp-3-3-1-0-t4075359! Problem solved!

Categories

Resources