If you afraid to flash qpst rom, here a method which will update your baseband/bootloader without qpst tool.
1) flash vendor to factory ( if you already flashed factory to vendor )
2) flash zui 3.5.389 full ota which has firmware included ( not the deodexed one by hendibudi )
Link :https://drive.google.com/file/d/1knkZxUyLNZO7uS8u_CK7j4j5-UqqGs5l/view (don't reboot
3) flash hendibudi's twrp for zui and reboot to rom
( The step 2 will lock your bootloader/ update your firmware/ bootloader. So we need to unlock bootloader again. To avoid wiping of internal storage we use twrp recovery which will only wipe /data
4)unlock your bootloader by following this
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/how-bootloader-zuk-z2-pro-t3415392
( You can use your old unlock image )
5) clean flash any nontreble rom( needed)
Reboot to rom.
6)Reboot to recovery, flash factory to vendor zip.
( Don't reboot )
7) install latest twrp from twrpbuilder.org for our device ( install--image -- select -- recovery-swipe to flash )
8) reboot to recovery
9) clean flash your fav 4.4. kernel ROMs.
Note:
I am not tested new twrp by twrpbuilder.org instead of hendibudi twrp at step 3.
If it doesn't encrypt internal storage, there is no need of step 5&7
I followed this and worked. Don't miss any steps
I've Lost my unclocked bootloader file. There is a way to extract It from my Zuk? Thanks?
Inviato dal mio Z2 Plus utilizzando Tapatalk
sandruman said:
I've Lost my unclocked bootloader file. There is a way to extract It from my Zuk? Thanks?
Inviato dal mio Z2 Plus utilizzando Tapatalk
Click to expand...
Click to collapse
You can request unlock .img again
The way I got it working was by
1. Flashing deodexed TWRP flashable ZUI 4.0.233 rom and then set it up along with magisk.
2. Flashed factory2vendor.zip
3. Flashed TWRP by z2_plus_treble-TWRP-3.2.2_kubersharma_v2.img available in his thread.
4. Clean Flashed AEX 5.8
5. After setup again in TWRP clean flashed a Beta version of AEX v6.0
6. Again after that clean flashed the Official version of AEX v6.0.
You can skip step 4 & 5. I followed those steps to avoid any Blue Screen issue recently reported by some users. I didn't face any Bootloader problem.
*Remember to use Kubersharma TWRP in step 3. I don't know why, but Treble TWRP compiled by Davide is not reading internal storage when flashed after ZUI deodexed.
*And I am not responsible for anything that happens during your adventures.
ShaktiSW said:
The way I got it working was by
1. Flashing deodexed TWRP flashable ZUI 4.0.233 rom and then set it up along with magisk.
2. Flashed factory2vendor.zip
3. Flashed TWRP by z2_plus_treble-TWRP-3.2.2_kubersharma_v2.img available in his thread.
4. Clean Flashed AEX 5.8
5. After setup again in TWRP clean flashed a Beta version of AEX v6.0
6. Again after that clean flashed the Official version of AEX v6.0.
You can skip step 4 & 5. I followed those steps to avoid any Blue Screen issue recently reported by some users. I didn't face any Bootloader problem.
*Remember to use Kubersharma TWRP in step 3. I don't know why, but Treble TWRP compiled by Davide is not reading internal storage when flashed after ZUI deodexed.
*And I am not responsible for anything that happens during your adventures.
Click to expand...
Click to collapse
Didn't you every flashed a 3.1+ zui via qpst before?
Because as far as i know the deodexed zui 4.0. 233 doesn't updates the bootloader
satyen_ said:
Didn't you every flashed a 3.1+ zui via qpst before?
Because as far as i know the deodexed zui 4.0. 233 doesn't updates the bootloader
Click to expand...
Click to collapse
I never needed to. And AEX 6.0 run pretty much smooth without blue screen issue. I just followed the above mentioned procedures.
Deleted.
senthamizhan said:
If you afraid to flash qpst rom, here a method which will update your baseband/bootloader without qpst tool.
1) flash vendor to factory ( if you already flashed factory to vendor )
2) flash zui 3.5.389 full ota which has firmware included ( not the deodexed one by hendibudi )
Link :https://drive.google.com/file/d/1knkZxUyLNZO7uS8u_CK7j4j5-UqqGs5l/view (don't reboot
3) flash hendibudi's twrp for zui and reboot to rom
( The step 2 will lock your bootloader/ update your firmware/ bootloader. So we need to unlock bootloader again. To avoid wiping of internal storage we use twrp recovery which will only wipe /data
4)unlock your bootloader by following this
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/how-bootloader-zuk-z2-pro-t3415392
( You can use your old unlock image )
5) clean flash any nontreble rom( needed)
Reboot to rom.
6)Reboot to recovery, flash factory to vendor zip.
( Don't reboot )
7) install latest twrp from twrpbuilder.org for our device ( install--image -- select -- recovery-swipe to flash )
8) reboot to recovery
9) clean flash your fav 4.4. kernel ROMs.
Note:
I am not tested new twrp by twrpbuilder.org instead of hendibudi twrp at step 3.
If it doesn't encrypt internal storage, there is no need of step 5&7
I followed this and worked. Don't miss any steps
Click to expand...
Click to collapse
First of all, kudos for the great job! I'm anxious to test it.
But please forgive my stupidity.
Which hendibudi TWRP build you mean? I could only find a 3.2.1 but I'm not sure it can handle Treble.
renatohm said:
First of all, kudos for the great job! I'm anxious to test it.
But please forgive my stupidity.
Which hendibudi TWRP build you mean? I could only find a 3.2.1 but I'm not sure it can handle Treble.
Click to expand...
Click to collapse
Yes it doest support treble partition. But we need that twtp to avoid internal storage encryption problem.
So we can flash any non treble ROM, reboot yo ROM, reboot to recovery , flash factory to vendor zip, flash latest treble twrp, reboot to twrp then flash 4.4 ROMs.
My entire point is flashing vendor to factory and and full ota 3.5.389 zip will update bootloader, firmware ( it will work just as qfil flash )
My guide can be followed if someone having trouble with qfil . ( tested by at least 2 people )
Other steps are just to avoid encryption and internal storage wipe problems that may come after flash.
Hope it'll remove doubts
senthamizhan said:
Yes it doest support treble partition. But we need that twtp to avoid internal storage encryption problem.
So we can flash any non treble ROM, reboot yo ROM, reboot to recovery , flash factory to vendor zip, flash latest treble twrp, reboot to twrp then flash 4.4 ROMs.
My entire point is flashing vendor to factory and and full ota 3.5.389 zip will update bootloader, firmware ( it will work just as qfil flash )
My guide can be followed if someone having trouble with qfil . ( tested by at least 2 people )
Other steps are just to avoid encryption and internal storage wipe problems that may come after flash.
Hope it'll remove doubts
Click to expand...
Click to collapse
Thanks for your kindness!
Alright then, I'm next on line to test! I'll just backup (it sucks...) then I'll flash!
Out of luck, flashing via Mi Tool now...
renatohm said:
Out of luck, flashing via Mi Tool now...
Click to expand...
Click to collapse
What happened
senthamizhan said:
What happened
Click to expand...
Click to collapse
Blue screen. I'm stuck on Qfil too, it also resulted in blue screen. Starting from scratch.
renatohm said:
Blue screen. I'm stuck on Qfil too, it also resulted in blue screen. Starting from scratch.
Click to expand...
Click to collapse
There is baseband zip file of 3.5 zui (in guides and discussion section) you can flash that if you don't want to go through the long process of Qfil, I flash that zip and i am able to use 4.4 kernels
This will not lock your bootloader and can be flashed by official TWRP
satyen_ said:
There is baseband zip file of 3.5 zui (in guides and discussion section) you can flash that if you don't want to go through the long process of Qfil, I flash that zip and i am able to use 4.4 kernels
This will not lock your bootloader and can be flashed by official TWRP
Click to expand...
Click to collapse
Yes, that's the reason I tried this in the first place, but it didn't work for me.
Qfil did work, and I'm now on Bootleggers.
sandruman said:
I've Lost my unclocked bootloader file. There is a way to extract It from my Zuk? Thanks?
Inviato dal mio Z2 Plus utilizzando Tapatalk
Click to expand...
Click to collapse
Bro,if u had used your email address try checking in your inbox again for image, just search bootloader .
I've changed my mail with a Gmail one and it work. Now I've my unl files
Inviato dal mio Z2 Plus utilizzando Tapatalk
flash vendor to factory ( if you already flashed factory to vendor ) "
explain this line
In these forums there was a file for updating baseband to 1.70. I flashed it promptly and my phone also went into soft brick. Because accidentally my bootloader got locked and got revised also. By using certain key combinations I succeeded in again unlocking my bootloader without formatting my inner storage . now I am able to flash 4.4 ROMs. Without going through all the hassles of backup, formatting and again flashing twrp.
Your guide didn't work for me (but step 2 using your file didn't lock my bootloader). It would be nice if you gave direct link to items in your steps (for i.e factory to vendor.zip, twrp...). I guess I'll try using qfil unless someone has some tips... BTW I can't find a good qfil guide for 4.4 kernel roms, could anyone give me a link to a helpful thread for it if I can't get it working using this method?
Related
UPDATE: This is now unneeded because threr is a faster way ro unlock bootloader on official MM here, he updated for official MM
Hi, I discovered an unlock method for official MM!! This maybe long but's it totally safe
You need:
Adb and fastboot environment ready PC
LP RAW File
Android 6.0 Beta Unlock tool
Android 5.0 One-Click Unlock tool
First version of beta MM (Z00A) (Z008)
Official MM zip (find it on Asus site)
Thanks to all people upload these links
Just do the following:
Flash the lastest LP via AFT (using raw file given above), wipe all data. If you already on MM, you have to downgrade
Unlock your bootloader using 1 click tool given above
Boot to stock recovery and sideload the first version of beta MM
Unlock the bootloader using MM beta unlock tool above
Boot to stock recovery
Two case here:
Case 1: You can't boot stock recovery
Normally boot your phone (to Android)
Setup it as a new phone
If it shows there is a new firmware, don't update!!!
Enable Developer options, then enable usb debugging
Copy the official MM zip to external sd card
Open command prompt, run adb reboot recovery, accept the adb permission if prompted
After it boots to recovery, select Apply update from SD, then choose the zip file you've copied before
Wait for it to update, it may stuck at flashing splashcreen, don't worry, it's trolling you, may be Asus forgot to update the script
Goto step 7
Case 2: You can boot stock recovery
Sideload the official MM zip (adb sideload <filename>.zip)
Goto step 7
7. Flash this TWRP (fastboot flash recovery <twrp>.img)
8. Root your phone using this method
9. Reboot, if it shows "Your phone has failed verification bla bla..", then you've success. It may reset loop like note 7 in the first time start, don't worry.
9. Enjoy :highfive:
Note: If you're facing with battery problems on MM, factory reset it in Settings > Backup and Reset > Factory Reset > Erase everything
Successfully on my ZE550ML
The warning screen is normal so don't worry and there is no way to fix it for now
Reverse
Reverse #2
Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app
NiTesh said:
Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, BL will be relocked once you upgrade to MM.
If you want to unlock MM BL(6.0), refer to this thread.
Or you can downgrade to Lollipop referring to this thread. Then your BL(5.0) is unlocked.
Upgrade to MM
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa
R3D SoX F4N said:
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa
Click to expand...
Click to collapse
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery
can anyone please upload official recovery for Zenfone 2 ZE551ML, currenty i have twrp installed on Android version 5.0 LP Stock
HungNgocPhat said:
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery
Click to expand...
Click to collapse
i have twrp recovery at the moment cause i followed mr_gouvad2000 tuturial..
what do you sugest?
flash WW_ZE551ML_2.20.40.196_20160815.raw?
WW_ZE551ML_2.20.40.194_20160713.raw?
and then go and do what you told?
cheers
hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english
tridet18 said:
hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english
Click to expand...
Click to collapse
someone correct me if i am worng but....
https://www.asus.com/Phone/ZenFone_2_ZE551ML/HelpDesk_Download/
Look for this version WW-4.21.40.134
Hello, thank you but this version is official, i need de first beta 6.0
R3D SoX F4N said:
someone correct me if i am worng but....
Look for this version WW-4.21.40.134
Click to expand...
Click to collapse
that version...i can´t find it anywere..maybe someone here knows were to find it?
Updated the first MM beta link in OP
hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?
tridet18 said:
hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?
Click to expand...
Click to collapse
Have you downloaded the correct build? There are build for MM bootloader, if you flash the normal builds, it will fail and reboot to recovery again. Gapps is the same for all builds
After you install that special build, do not update to newer nightlies, it will fail. For updates, check the link i give you and see if there is a new MMBL build.
About that, here is the post: http://forum.xda-developers.com/showpost.php?p=68542370&postcount=8551
hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!
tridet18 said:
hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!
Click to expand...
Click to collapse
Run the script again (i gave you in above post). Download the CM13 in that link, not in the OP of CM13 thread. Flash that CM13 and Gapps (Gapps is universal for MMBL and LPBL).
May be you have corrupt download, I'm currently running CM13 on MMBL
Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .
hlp
tridet18 said:
Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .
Click to expand...
Click to collapse
how u unlocked bootloader
Okay guys first let me tell you why I have created a new thread just for updating the BL and Firmware ,
I know we already have methods of updating like:
1. flashing the full OOS3 zip through stock recovery ,this method is quite simple for the ones who are on stock recovery and just want to update their OOS version.If you fall in this category then you have no purpose here,you may leave.
2. Is method provided by our fav helping hand @Joshwin Aranha ,that method is sure for the rest of us who dont fall in the above category,but is way too long,although simple and effective still "long".
I created this thread to help the CM13(Official or Sultan's)//any custom rom using new BL,users who want to update their BL without flashing the OOS through the tedious way just to update BL and users who are stuck on bootlogo due to old BL with roms using new BL.
Here I will guide you through the required steps to update our bootloader "In easiest and fastest way without wiping and restoring anything".
So what are we waiting for ,lets start .
Prerequisites
you will need two files for this process,nothing else.
1 . First one is BLUpdater zip --->Here.
2. Second is TWRP compiled from latest sources use either This or the one from Here<--use v41 or use Sultan's from Here OR if you are Martin's fan like me and want to use his MutiRom TWRP goHere.
PS:I am assuming you have Unlocked Bootloader and have either
official/blu_spark/sultan's/ Multirom TWRP installed,in a working condition on OOS2.x BL(if not what are you doing here).
Note: make sure oem unlocking is checked in developer options in your current rom,else updating the BL may cause it to get locked ,and you will have to unlock it again and flash the recovery manually through fastboot itself.
Now the steps
1.First copy both of the above files in your sdcard or otg or ext-sdcard,any place accessible in recovery.
2. Now boot into recovery Choose Install and choose the "OPXBLUpdateOOS3.1" zip and flash it.
3. Don't reboot now ,go to Install again ,this time use "Install Image" button in lower right corner,navigate to folder where you copied the new TWRP,you should be able to see the file,select it ,choose recovery in the next menu and flash.
NOTE:If you chose to use Sultan's recovery.zip then just flash it normally.
4. Don't reboot come back to TWRP home ,goto reboot and recovery ,if TWRP says no OS installed ignore it.
Now voila you should have updated your firmware/BL.Congrats.
You can now install any rom that supports the new BL.Older roms won't boot on the new MM BL.So check the rom thread before installing the rom and later on quacking here about your device being stuck at bootlogo.
Notes
i)Neither I nor XDA will be responsible if your OPX bricks or explodes or ditches you and flies to space.
ii)We are not touching system partition so last installed ROM will be intact.
iii)This guide will leave you into bootable rom only if you have a rom installed that works on latest firmware.
iv)This can also be used to restore all your OPX partitions back to OOS3.x partition state,if you messed any.
v)In case you are using latest nightly (cm13) and face bootloop - go Here
psst:If you are not diggin the new BL,and wanna downgrade again ,back to old BL,check this post.
PS: (second one,I know) This guide was made by taking inspiration from Joshwin's post and devtry method.
Also click Thanks if I helped you
matwaking said:
Okay guys first let me tell you why I have created a new thread just for updating the BL and Firmware ,
I know we already have methods of updating like:
1. flashing the full OOS3 zip through stock recovery ,this method is quite simple for the ons who are on stock recovery and just want to their OOS version.If you fall in this category then you have no purpose here,you may leave.
2. Is method provided by our fav helping hand @Joshwin Aranha ,that method is sure for the rest of us who dont fall in the above category,but is way too long,although simple and effective still "long".
So I created this thread just to shorten the process provided by Joshwin.I also created this thread to help the official CM13 users who have problem with latest nightlies due to new bootloader or are stuck in bootlogo.
...
PS: (second one,I know) This guide was made by taking inspiration from Joshwin's post and devtry method.
Also click Thanks if I helped you
Click to expand...
Click to collapse
Booomshkalaka!!!
Great guide, can't test (already have new bootloader and too lazy to switch back but look very good.
Thx to all
Kurt
Kurt Krummbein said:
Booomshkalaka!!!
Click to expand...
Click to collapse
Lol .
Thanks mate.
Will this work if I'm in bluspark twrp but the previous version..? Or do I have to change to official twrp?
jonrodz said:
Will this work if I'm in bluspark twrp but the previous version..? Or do I have to change to official twrp?
Click to expand...
Click to collapse
Will work with any twrp,no requirement of official one.
Thanks, bro. One more doubt. I'm currently on DU rom with custom kernel... Do you think rom will boot after this..?
jonrodz said:
Thanks, bro. One more doubt. I'm currently on DU rom with custom kernel... Do you think rom will boot after this..?
Click to expand...
Click to collapse
No it wont,right now almost all the custom roms need to update to support new firmware.Only latest cm13 nightlies are booting now,also aosp compiled by olddroid for new BL(shh its only for testers right now)
also maybe the MIUI8 port ,just posted in the forums.
I'm a litte bit confused.
Currently I'm on nighty October 1st. (cm-13.0-20161001-NIGHTLY-onyx.zip)
Can i update the Bootloader with your method and after that booting up my current nightly version?
Or do I have to update after the bootloader update to nightly version 12 (the currently latest)?
jerikooo said:
I'm a litte bit confused.
Currently I'm on nighty October 1st. (cm-13.0-20161001-NIGHTLY-onyx.zip)
Can i update the Bootloader with your method and after that booting up my current nightly version?
Or do I have to update after the bootloader update to nightly version 12 (the currently latest)?
Click to expand...
Click to collapse
no update the BL using the steps above ,then flash the latest nightly.That way it would be good.
Or you can flash nightly first then update BL.Choice is yours.I recommend updating the BL first.
I followed your guide with a locked bootloader, and now I'm in bootloops . Just suggest you put a big red "make sure your bootloader is unlocked" in the steps, not in the footnote.
Duplicate post.Deleted
ccaappton said:
I followed your guide with a locked bootloader, and now I'm in bootloops . Just suggest you put a big red "make sure your bootloader is unlocked" in the steps, not in the footnote.
Click to expand...
Click to collapse
Reboot into fastboot mode and
Code:
fastboot oem unlock
And using a custom recovery and custom rom makes me assume one have unlocked bootloader
matwaking said:
Reboot into fastboot mode and
Code:
fastboot oem unlock
And using a custom recovery and custom rom makes me assume one have unlocked bootloader
Click to expand...
Click to collapse
Thanks! I actually relocked my bootloader not long after installed cm13, and disabled "unlock oem" in "developer settings"(I don't know why I did this). So both system and rec is inaccessible, and fastboot is useless in this case. Fortunately I followed the unbrick guide: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 and get the old bootloader back. Now I could enter CM13-09-28 with all my data intact.
Just hope to let people know the hard lesson I learned, and how to deal the bootloops.
And guys, NEVER RELOCK BOOTLOADER AGAIN!
ccaappton said:
Thanks! I actually relocked my bootloader not long after installed cm13, and disabled "unlock oem" in "developer settings"(I don't know why I did this). So both system and rec is inaccessible, and fastboot is useless in this case. Fortunately I followed the unbrick guide: http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 and get the old bootloader back. Now I could enter CM13-09-28 with all my data intact.
Just hope to let people know the hard lesson I learned, and how to deal the bootloops.
And guys, NEVER RELOCK BOOTLOADER AGAIN!
Click to expand...
Click to collapse
Well no fix without any problems hehehe,.Haapy 4 u.
Click that button if you think my posts are useful
Is this enough to install CM14 or do i have to install the whole room and them flash CM14?
Manelit said:
Is this enough to install CM14 or do i have to install the whole room and them flash CM14?
Click to expand...
Click to collapse
taking you wanna flash ashwins cm14 right. You just wanna follow the instructions in first post and then flash the cm14.No need to install the whole Oos zip.
This way you should have updated BL and working cm14.
Just flash the cm14 after booting into new TWRP
I've just followed the procedure from OP and all went smooth as butter. Thanks
Directly after that (without reboot) I've installed the latest CM13 (with GApps) and Arsenic R24. Working as a charm
slaav said:
I've just followed the procedure from OP and all went smooth as butter. Thanks
Directly after that (without reboot) I've installed the latest CM13 (with GApps) and Arsenic R24. Working as a charm
Click to expand...
Click to collapse
Press that sweet sweet button mate
1.First copy both of the above files in your sdcard or otg or ext-sdcard,any place accessible in recovery.
2. Now boot into recovery Choose Install and choose the "OPXBLUpdateOOS3.1" zip and flash it.
3. Don't reboot now ,go to Install again ,this time use "Install Image" button in lower right corner,navigate to folder where you copied the new TWRP,you should be able to see the file,select it ,choose recovery in the next menu and flash.
4. Don't reboot come back to TWRP home ,goto reboot and recovery ,if TWRP says no OS installed ignore it.
Click to expand...
Click to collapse
Hi, everyone
I'm accidentally reboot device after second step. Now device freezing on "+1 powered by android". Can I remove this zip, or... what can I do next?)
walsash said:
Hi, everyone
I'm accidentally reboot device after second step. Now device freezing on "+1 powered by android". Can I remove this zip, or... what can I do next?)
Click to expand...
Click to collapse
u can flash bluespark twrp via fasboot
Sent from my ONE E1003 using XDA-Developers mobile app
This is for people who have received their phone with a pre-installed Vendor ROM (MIUI Global Stable 8.0.8.0) and wants to switch to the Unofficial EU ROM. In my opinion, the EU ROM is currently the best ROM without any Chinese bloatware or popups until Xiaomi decides to release an actual Global ROM.
For those who are already on a China Stable ROM, there is already an excellent guide to install TWRP, ROOT, compiled by @underlines. This is only intended for switching from a Vendor ROM as I wasn't able to switch from a Vendor ROM to an official build using the previous guide. You need to be on an official build to be able to use TWRP and flash the EU ROM.
EDIT : The reason why I have mentioned to flash an official build at first is because, TWRP can be unresponsive with some Vendor ROMS. You'll be able to boot TWRP but touch would be frozen. I've tried with both versions of TWRP and it wouldn't work with the Vendor ROM installed on my device. TWRP over the Vendor ROM may work for some users.. For some builds like the one which came installed on my phone, it may not work. If TWRP works for you without being on an official build, you can skip the part where you have to flash an official ROM.
1. You need to have an unlocked bootloader. Please follow instructions on the other guide on how to do this.
2. You need the older version of MiFlash found on this link. Thanks to @Thorin78 for this link.
3. Download and extract fastboot Stable or Dev ROM and extract ROM folder to the C:\ Drive. This is because MiFlash may show a "cannot find file" error if you have a lot of subfolders. To avoid this, its best if the folder is C:\ROM Folder.
4.In the older version of MiFlash, click advanced and change the fastboot script location to the flash_all.bat in your unzipped rom folder.
5.Connect your phone in fastboot mode, click "Refresh" in MiFlash. Once your phone is detected, click "Flash" and it should now successfully flash the official ROM of your choice.
If you wish to be on a Xiaomi Official Stable or Dev ROM, Stop here! If you wish to continue installing the EU ROM proceed with the steps below.
6. Now that you have successfully flashed Official Stable or Dev ROM, use Minimal ADB and flash TWRP RC2 using the instructions in the other guide.
7. Once you are in TWRP, Swipe right to allow System Modifications and copy the forced encryption disabler using MTP. Flash this file to ensure that there are no bootloops.
8. After this step, go to WIPE, Format Storage, type "yes" and then Reboot Recovery. Copy SuperSU and EU ROM to storage and flash. Phone may take a few minutes to boot up and you will successfully boot the EU ROM.
For everything else, please follow the guide posted by underlines.
TWRP EU RC2 works with the China Dev ROM as well. Once you Swipe to Right to allow modifications, don't forget to flash the latest dm-verity and forced encryption disabler script from here. This is to prevent the device going into a bootloop.
These are the steps I followed and I am on EU ROM. Hope this helps people who wish to switch to the EU ROM from the Vendor ROM.
The link to miflash takes you DL minimal adb?
jazz452 said:
The link to miflash takes you DL minimal adb?
Click to expand...
Click to collapse
Corrected. Thanks for letting me know! Cheers!
satishp said:
Corrected. Thanks for letting me know! Cheers!
Click to expand...
Click to collapse
I managed to flash with latest miflash using your guide my bootloader was already unlocked check using:
boot your phone into fastboot and COMMAND PROMPT " fastboot oem device-info "
most are probably unlocked with vendor rom but not all.
Don't try to unlock with this method just check to save sometime.
guide: http://xiaomitips.com/guide/how-to-check-if-redmi-note-3-bootloader-is-locked-or-unlocked/
jazz452 said:
I managed to flash with latest miflash using your guide my bootloader was already unlocked check using:
boot your phone into fastboot and COMMAND PROMPT " fastboot oem device-info "
most are probably unlocked with vendor rom but not all.
Don't try to unlock with this method just check to save sometime.
guide: http://xiaomitips.com/guide/how-to-check-if-redmi-note-3-bootloader-is-locked-or-unlocked/
Click to expand...
Click to collapse
I guess it also depends on the Vendor ROM and customization which comes installed on your device. Not all Vendor ROMs for this device are the same. I tried everything under the sun with the latest miflash. It would detect device and even give a "success" output but the ROM was never actually flashed. The phone would still be on the Vendor ROM. Its as if some Vendor ROMs have some form of write protection baked in.
I could only get it working with the older miflash.
I'm not saying it was easy, the hard thing was making the unpack ING of the file. Sort of did it twice never had that problem before.
Why is it required to flash the official rom before flashing the EU rom?
nkatz565 said:
Why is it required to flash the official rom before flashing the EU rom?
Click to expand...
Click to collapse
This for people who don't want TWRP, root and dm-verify, just genuine Xiaomi rom with OTA updates and remove vendor rom.
QQ.
I did the following on my Mix and wondering if I am missing anything. I should say that everything "appears" to be working perfectly on the EU rom.
My Mix came with 8.0.8.0 Global (Vendor ROM) and I wanted to move onto the Xiaomi.eu rom. I loosely followed the above guide and did the following steps:
Applied for Unlock
Unlocked the device via MiUnlock
Used Minimal ADB and booted the device into FastBoot
Confirmed device was Bootloader unlocked
Flashed TWRP (latest non-eu build)
Booted to recovery
DID NOT swipe to edit system partition, left that read only
Flashed the latest Weekly Xiaomi.eu build
Wiped Dalvik/Cache
Booted phone
Performed a Factory reset.
All seemed a little too easy and I didnt need to go to an "Official" china ROM first. But I do have a few questions...
Should I have swiped Yes to enter Read/Write mode for the system partition and run a dm-verify? (I am not interested in Rooting the device at this stage)
Should I have performed a System clear in TWRP before installing Xiaomi.eu ontop of the Vendor ROM?
geubes said:
QQ.
I did the following on my Mix and wondering if I am missing anything. I should say that everything "appears" to be working perfectly on the EU rom.
My Mix came with 8.0.8.0 Global (Vendor ROM) and I wanted to move onto the Xiaomi.eu rom. I loosely followed the above guide and did the following steps:
Applied for Unlock
Unlocked the device via MiUnlock
Used Minimal ADB and booted the device into FastBoot
Confirmed device was Bootloader unlocked
Flashed TWRP (latest non-eu build)
Booted to recovery
DID NOT swipe to edit system partition, left that read only
Flashed the latest Weekly Xiaomi.eu build
Wiped Dalvik/Cache
Booted phone
Performed a Factory reset.
All seemed a little too easy and I didnt need to go to an "Official" china ROM first. But I do have a few questions...
Should I have swiped Yes to enter Read/Write mode for the system partition and run a dm-verify? (I am not interested in Rooting the device at this stage)
Should I have performed a System clear in TWRP before installing Xiaomi.eu ontop of the Vendor ROM?
Click to expand...
Click to collapse
Wouldn't worry about it the vendor ROMs aren't poison, not sure about dm-verify if you kept read only. I would of swiped then flashed dm-verify but didn't mean I know what I'm doing.
nkatz565 said:
Why is it required to flash the official rom before flashing the EU rom?
Click to expand...
Click to collapse
This is because some Vendor ROMS have some compatibility issues with TWRP. Touch screen wouldn't work on TWRP. I tried both TWRP versions and couldn't get touch to work.
Finally, I flashed the China Dev ROM and then used TWRP RC2 and touch functionality worked.
As some users below have pointed out that they could get to EU without flashing the one of the official builds, I guess it depends on the amount or type of vendor customizations applied on your device.
Which version do you own? I was wondering if this would work with the 6GB as well.
dbesada said:
Which version do you own? I was wondering if this would work with the 6GB as well.
Click to expand...
Click to collapse
This works with both versions. The ROM is compatible with both variants as the size of memory and storage doesn't affect compatibility.
I have the 6\256 variant.
satishp said:
This works with both versions. The ROM is compatible with both variants as the size of memory and storage doesn't affect compatibility.
I have the 6\256 variant.
Click to expand...
Click to collapse
Thank you. It worked. I fastboot twrp then factory reset the device and flashed the eu rom. All good. My bootloader was unlocked by the vendor.
Can someone please give me some advice? Just got the phone a couple hours ago. I took a picture of the info page. Based on the screenshot am I on the vendor ROM or official? I'm thinking I'm on Vendor because it has GAPPS already included.
If I'm on Vendor ROM and want to get to rooted EU Rom I can follow directions in the OP right?
How do I know is if my bootloader is already unlocked? Many thanks
SantinoInc said:
Can someone please give me some advice? Just got the phone a couple hours ago. I took a picture of the info page. Based on the screenshot am I on the vendor ROM or official? I'm thinking I'm on Vendor because it has GAPPS already included.
If I'm on Vendor ROM and want to get to rooted EU Rom I can follow directions in the OP right?
How do I know is if my bootloader is already unlocked? Many thanks
Click to expand...
Click to collapse
Vendor (there is no Global ROM for Mix). You should unlock your bootloader (check if it's already unlocked using "fastboot oem device-info"), flash TWRP, wipe and flash EU
Razorbacktrack5535 said:
Vendor (there is no Global ROM for Mix). You should unlock your bootloader (check if it's already unlocked using "fastboot oem device-info"), flash TWRP, wipe and flash EU
Click to expand...
Click to collapse
Do I have to do Power + Vol Down (that's bootloader mode right) in order to input the ADB code you gave me?
SantinoInc said:
Do I have to do Power + Vol Down (that's bootloader mode right) in order to input the ADB code you gave me?
Click to expand...
Click to collapse
Yes, you have to use Fastboot Mode
Razorbacktrack5535 said:
Yes, you have to use Fastboot Mode
Click to expand...
Click to collapse
I'm not unlocked right? Hope they approve my unlock request soon
SantinoInc said:
I'm not unlocked right? Hope they approve my unlock request soon
Click to expand...
Click to collapse
Yes, you have to wait
Dear Friends,
My sister has Asus Zenfone 5 t00j kitkat version.
I would to install a custom ROM. I am not familiar with this model. Please solve my doubts:
1. Need to upgrade kitkat firmware before install Android 7 based custom ROM?
2. Which custom ROM is stable for asus t00j ?
Please give me the link
vimal0212 said:
Dear Friends,
My sister has Asus Zenfone 5 t00j kitkat version.
I would to install a custom ROM. I am not familiar with this model. Please solve my doubts:
1. Need to upgrade kitkat firmware before install Android 7 based custom ROM?
2. Which custom ROM is stable for asus t00j ?
Please give me the link
Click to expand...
Click to collapse
I will recommend you to first upgrade your Android version to lollipop with latest firmware version ww-3.24.40.87 .
After upgrading, root your device and after that unlock your bootloader.
For rooting method, search in Asus zenfone 5 forum.
And for unlocking bootloader you can visit this link below-
https://forum.xda-developers.com/zenfone-5/general/guide-how-to-unlock-bootloader-safely-t3562640
After unlocking bootloader you need to flash the TWRP Recovery. You can unlock bootloader and install twrp together in just one click. For that just visit the above link provided.
Now I'm assuming that you have rooted your phone and also your bootloader is unlocked and latest twrp is installed. So now head over to "Android development" forum of zenfone 5 and search for Resurrection Remix 5.8.2 by tank0412. This ROM is stable and also the developer is providing weekly updates.
I hope that this will help you out.
juyel92 said:
I will recommend you to first upgrade your Android version to lollipop with latest firmware version ww-3.24.40.87 .
After upgrading, root your device and after that unlock your bootloader.
For rooting method, search in Asus zenfone 5 forum.
And for unlocking bootloader you can visit this link below-
https://forum.xda-developers.com/zenfone-5/general/guide-how-to-unlock-bootloader-safely-t3562640
After unlocking bootloader you need to flash the TWRP Recovery. You can unlock bootloader and install twrp together in just one click. For that just visit the above link provided.
Now I'm assuming that you have rooted your phone and also your bootloader is unlocked and latest twrp is installed. So now head over to "Android development" forum of zenfone 5 and search for Resurrection Remix 5.8.2 by tank0412. This ROM is stable and also the developer is providing weekly updates.
I hope that this will help you out.
Click to expand...
Click to collapse
Dear brother,
Thank you for the detailed direction.
Let me try.
vimal0212 said:
Dear brother,
Thank you for the detailed direction.
Let me try.
Click to expand...
Click to collapse
It's mine pleasure.?
And also download the latest lollipop firmware from Asus official website.
juyel92 said:
It's mine pleasure.?
And also download the latest lollipop firmware from Asus official website.
Click to expand...
Click to collapse
T00F files suitable for T00J?
vimal0212 said:
T00F files suitable for T00J?
Click to expand...
Click to collapse
Yes. T00F and T00J both are same.
Just download it from official Asus website.
Just remember your SKU which is ww, tw, or cn.
To check your SKU, go to settings - about phone - and there check which firmware you have officially.
If you have WW firmware then you have to download ww firmware from the Asus website.
Eg. WW > WW
TW > TW
CN > CN
I successfully rooted and unlock the phone.
I failed to update the firmware.
My phone build number (KitKat) is that ASUS_T00J_WW_user_2.22.40.54_2015......
I downloaded and tried to flash the firmware UL-ASUS_T00F-WW-3.24.40.87-user
While updating it shows an error message,
Please use the right SKU for updating.
Please guide me the firmware with right SKU for my phone.
Regards.
vimal0212 said:
I successfully rooted and unlock the phone.
I failed to update the firmware.
My phone build number (KitKat) is that ASUS_T00J_WW_user_2.22.40.54_2015......
I downloaded and tried to flash the firmware UL-ASUS_T00F-WW-3.24.40.87-user
While updating it shows an error message,
Please use the right SKU for updating.
Please guide me the firmware with right SKU for my phone.
Regards.
Click to expand...
Click to collapse
Did you rooted your phone and also did you successfully unlocked the bootloader ????
Did you intalled the TWRP recovery ???
juyel92 said:
Did you rooted your phone and also did you successfully unlocked the bootloader ????
Did you intalled the TWRP recovery ???
Click to expand...
Click to collapse
Phone rooted. I checked with root checker.
Boot loader unlocked using app.
TWRP installed successfully.
Anything else todo?
vimal0212 said:
Phone rooted. I checked with root checker.
Boot loader unlocked using app.
TWRP installed successfully.
Anything else todo?
Click to expand...
Click to collapse
Which app you used to unlock the bootloader ?
And which version of TWRP recovery you have installed/flashed?
juyel92 said:
Which app you used to unlock the bootloader ?
And which version of TWRP recovery you have installed/flashed?
Click to expand...
Click to collapse
I used following app to unlock the boot loader,
UnLock_A500CG_a500cg_platform_rel.apk
TWRP version TWRP-3.0.M2-0.img
vimal0212 said:
Phone rooted. I checked with root checker.
Boot loader unlocked using app.
TWRP installed successfully.
Anything else todo?
Click to expand...
Click to collapse
If your phone is rooted and you have successfully unlocked the bootloader with TWRP installed then now you are ready to install the custom nougat ROM. No need to upgrade your android version with stock firmware. Just proceed forward and follow what I'm saying -
Click here to download Ressurection Remix v5.8.2 nougat ROM
Visit the above link and download the RR ROM.
After downloading the RR ROM, now you have to download the GApps Pico 7.1 x86
Click here to download GApps
Put the downloaded ROM zip file and GApps zip file in your external memory card.
Now steps for flashing the ROM -
1. Reboot to recovery.
2. Go to Wipe section - Advanced Wipe, and then select the cache, dalvik cache, system, data, internal.
After selecting the above, now swipe to wipe.
3. After wiping, go back to wipe section again and tap on "Format Data", and type "yes" and press ok.
4. After formatting completed, go back to main screen and then go to Install section, and locate the ROM zip file. Select it and swipe to flash.
5. Now your ROM is flashed, so go back again and select the GApps zip file and swipe to flash.
6. Now flash the SU Addon (If you want the root access) (OPTIONAL) If you don't want then you can skip this step.
7. Now your ROM and GApps both are flashed, so now go back to main screen again and then go to reboot section,then select "REBOOT SYSTEM"
That's It. You have successfully flashed the new nougat ROM.
First boot will take approx. 5 - 10 mins.
juyel92 said:
If your phone is rooted and you have successfully unlocked the bootloader with TWRP installed then now you are ready to install the custom nougat ROM. No need to upgrade your android version with stock firmware. Just proceed forward and follow what I'm saying -
Click here to download Ressurection Remix v5.8.2 nougat ROM
Visit the above link and download the RR ROM.
After downloading the RR ROM, now you have to download the GApps Pico 7.1 x86
Click here to download GApps
Put the downloaded ROM zip file and GApps zip file in your external memory card.
Now steps for flashing the ROM -
1. Reboot to recovery.
2. Go to Wipe section - Advanced Wipe, and then select the cache, dalvik cache, system, data, internal.
After selecting the above, now swipe to wipe.
3. After wiping, go back to wipe section again and tap on "Format Data", and type "yes" and press ok.
4. After formatting completed, go back to main screen and then go to Install section, and locate the ROM zip file. Select it and swipe to flash.
5. Now your ROM is flashed, so go back again and select the GApps zip file and swipe to flash.
6. Now flash the SU Addon (If you want the root access) (OPTIONAL) If you don't want then you can skip this step.
7. Now your ROM and GApps both are flashed, so now go back to main screen again and then go to reboot section,then select "REBOOT SYSTEM"
That's It. You have successfully flashed the new nougat ROM.
First boot will take approx. 5 - 10 mins.
Click to expand...
Click to collapse
Thank you for the information brother.
Sunday I will try the above-mentioned method.
My cousin went to home with phone!!
Good night.
vimal0212 said:
Thank you for the information brother.
Sunday I will try the above-mentioned method.
My cousin went to home with phone!!
Good night.
Click to expand...
Click to collapse
It's mine pleasure.
If you get any problem then you can ask me anytime.
I would like to share my experience while install RR on Zenfone 5.
I wiped as per the instructions.
When install RR file, I got following error:
E: Failed to sysMapFile .................
Error flashing zip.
Another information is that recovery is Pinaslang version 2.8.6.0.
I think recovery based on TWRP.
I need quick help to overcome the trouble situation.
Regards,
vimal0212 said:
I would like to share my experience while install RR on Zenfone 5.
I wiped as per the instructions.
When install RR file, I got following error:
E: Failed to sysMapFile .................
Error flashing zip.
Another information is that recovery is Pinaslang version 2.8.6.0.
I think recovery based on TWRP.
I need quick help to overcome the trouble situation.
Regards,
Click to expand...
Click to collapse
You cannot flash nougat ROMs with twrp 2.8.6 ,.... As you will end up with several errors so better switch to latest twrp I.e twrp 3.0 xx versions by xanwar . after that you can follow juyels method of flashing the ROM .
Download the twrp version from below link .
1:If you downloading zip file then flash through your old recovery and reboot to recovery .
2: if you downloaded .IMG file then flash through fastboot using the below code
Code:
fastboot flash recovery <filename>.img
Link for latest twrp : here
Dear Friends,
Finally, I could successfully installed RR.
Your suggestions are very timely and helpful.
After installation of TWRP 3, RR installed without any problem.
Thank you again, brothers.
vimal0212 said:
I would like to share my experience while install RR on Zenfone 5.
I wiped as per the instructions.
When install RR file, I got following error:
E: Failed to sysMapFile .................
Error flashing zip.
Another information is that recovery is Pinaslang version 2.8.6.0.
I think recovery based on TWRP.
I need quick help to overcome the trouble situation.
Regards,
Click to expand...
Click to collapse
That's why I asked you before that which version of twrp you have flashed..and you told me that twrp 3.x.x.
That's why this type of problem you are facing. you should told me before that you are using twrp 2.8.6.0 then I will provide you the correct suggestions. Then this errors will never happened to you.
Anyway, @Boomshiva has already helped you out. And also you have flashed the nougat ROM successfully. So now enjoy your new nougat ROM. ?
juyel92 said:
That's why I asked you before that which version of twrp you have flashed..and you told me that twrp 3.x.x.
That's why this type of problem you are facing. you should told me before that you are using twrp 2.8.6.0 then I will provide you the correct suggestions. Then this errors will never happened to you.
Anyway, @Boomshiva has already helped you out. And also you have flashed the nougat ROM successfully. So now enjoy your new nougat ROM. ?
Click to expand...
Click to collapse
Thank you for the support brother. TWRP version was not visible. Now the phone owner very happy
vimal0212 said:
Thank you for the support brother. TWRP version was not visible. Now the phone owner very happy
Click to expand...
Click to collapse
That's great.
I'm glad to hear that from you.
Keep enjoying
DISCLAIMER: YOU ARE RESPONSIBLE FOR WHAT YOU DOThe only reason behind posting this guide is because now we have a way to fix device if any unusual things happen after flashing beta builds. Beginners & noobs who doesn't have any idea about flashing stuff should stay away.
PREREQUISITES:
1. Bootloader Unlocked Device
2. OrangeFox
3. Stable OZIP (Android 10 | realmeUI 1.0 | C35)
4. Beta ZIP (Android 11 | realmeUI 2.0 | F06)
5. Unofficial OrangeFox beta build (For realmeUI 2.0 A11 FW only)
6. realmeUI 2.0 stock recovery
7. A11 VBMETA
8. Patched VBMETA
PROCESS TO FLASH:
1. Just to be on safer side we are going to make sure everything is stock & all partitions are unmodified. So reflash latest Stable OZIP (C35) via OrangeFox.
2. Format data & reboot to System (This is optional but better to do it, we never know what might happen with realme device)
3. Reboot back to Bootloader if realmeUI 1.0 boots fine
4. Flash OrangeFox build which you used previously & also flash patched vbmeta (fastboot flash vbmeta patched_vbmeta.img)otherwise you get "Boot is destroyed........"
5. Boot into custom recovery & copy downloaded Beta ZIP
6. Flash the Beta ZIP & format data.
7. Reboot to System. realmeUI 2.0 should boot now.
COMMON ISSUES & FIXES:
1. Device stuck at white realme splash logo
Sol. Few people reported it booted when they flashed patched vbmeta so you can first try that. If doesn't work then you can flash A11 vbmeta (fastboot flash vbmeta vbmeta.img) attached here & reboot to system
2. Device stuck at Yellow realme boot animation
Sol. If it's stuck for more than 2-3mins then reboot to bootloader & format data by executing fastboot erase userdata ., never do fastboot -w it's messing up data partition in A11 due to new changes introduced by realme
3. Stuck in bootloader (fastboot)
Sol. Flash the unofficial OrangeFox rescue build & boot into it, copy C35 OZIP to internal storage. Flash it & format data. Reboot to System. Wait for public realmeUI 2.0 release.
4. Unofficial OrangeFox beta build stuck at Ofox splash & display keeps blinking
Sol. This happens because Ofox can't decrypt realmeUI 2.0 data, only way to boot this ofox build properly is by formatting data, reboot back to bootloader. fastboot erase userdata
5. Device doesn't have realmeUI 2.0 Stock Recovery
Sol. Flash the attached stock recovery
reserved
Congrats! Will try now
EDIT: Works fine but just 2 hints.
1: Don't Use TWPR 3.5.0_9 or you will get Zip Treble Error
2: After you flash RUI 2.0 it's a MUST flash A11 VBMETA
Can i Flash on Locked Bootloader device via stock recovery or filemanager currently i am c 34 locked bootloader
bharatgsp said:
Can i Flash on Locked Bootloader device via stock recovery or filemanager currently i am c 34 locked bootloader
Click to expand...
Click to collapse
na it doesn't work
ChromiumPD said:
Congrats! Will try now
EDIT: Works fine but just 2 hints.
1: Don't Use TWPR 3.5.0_9 or you will get Zip Treble Error
2: After you flash RUI 2.0 it's a MUST flash A11 VBMETA
Click to expand...
Click to collapse
Right will update guide, thank you
What does the check look like that prevents the stock recovery from accepting to flash the beta build (if you try to upgrade from C.35)?
kurtextrem said:
What does the check look like that prevents the stock recovery from accepting to flash the beta build (if you try to upgrade from C.35)?
Click to expand...
Click to collapse
Stock recovery only accepts signed OZIP/ZIP like the ones uploaded in their website, OTA updates we receive are signed with different certificate that's why installing those custom OZIPs fail if we do it manually.
It can't install on TWRP 3.4.0.0 -> Error this package is for RMX1931L1, this is a ""
Zippka224 said:
It can't install on TWRP 3.4.0.0 -> Error this package is for RMX1931L1, this is a ""
Click to expand...
Click to collapse
edited guide, use ofox only. TWRP doesn't seem to work for everyone.
Hi, first thanks for the post.
I would like to ask you if there is a way to revert back to c35 after?
Thank you in advance
4j17h said:
Stock recovery only accepts signed OZIP/ZIP like the ones uploaded in their website, OTA updates we receive are signed with different certificate that's why installing those custom OZIPs fail if we do it manually.
Click to expand...
Click to collapse
Thank you. I wonder how the software update works then? How does the software update "app" manage to flash those builds then?
Tierri said:
Hi, first thanks for the post.
I would like to ask you if there is a way to revert back to c35 after?
Thank you in advance
Click to expand...
Click to collapse
Well there are two ways, we can use stock recovery to downgrade from beta builds to C34
Another way would be to flash unofficial Ofox build, copy C34 OZIP to internal storage & flash it.
kurtextrem said:
Thank you. I wonder how the software update works then? How does the software update "app" manage to flash those builds then?
Click to expand...
Click to collapse
OTA updater app is verifying the update & rebooting to stock recovery, so if we can figure out the same way we can install custom ozips via stock recovery too
How would you recommend to bring over apps & their settings to A11? After formatting data they'll be lost. Which backup method is able to restore them? Have you rooted it already?
Magisk?
Cool ! It works fine thank you.
but I noticed that the "Unofficial OrangeFox beta build" cant mount internal storage issue with following error : "could not mount /data and unable to find crypto footer"
So is there another way to Root my device without wiping data?
Hi
First Thank you for this post .
I want to restore a stock recovery UI 1.0 now i am using orangefox recovery on C.34
can i restore without format data or waiting UI 2.0 stable ??
Many Thanks
Hi,
I've followed the steps and no errors. After reboot, the system stucks at Realme white logo. How it's said on common issues, i've flashed then A11 vbmeta, and the same. Ive waited about 10minutes and it keeps there. I've tried flash the Ofox recovery again to repeat the process but now I can't get Ofox working. I can access fastboot and if I try reboot to recovery, it symply reboots to bootloader... What should I do? I also tried all the options in common issues but without success...
Thanks
tuga49 said:
Hi,
I've followed the steps and no errors. After reboot, the system stucks at Realme white logo. How it's said on common issues, i've flashed then A11 vbmeta, and the same. Ive waited about 10minutes and it keeps there. I've tried flash the Ofox recovery again to repeat the process but now I can't get Ofox working. I can access fastboot and if I try reboot to recovery, it symply reboots to bootloader... What should I do? I also tried all the options in common issues but without success...
Thanks
Click to expand...
Click to collapse
try to install patched vbmeta its work form me
So for me I dirty flashed the f06.zip beta on c.35 in official [email protected]_1 release and flashed vbmetaA11 but it failed to then i flashed patched_vbmeta.img and voila it booted just fine and optimizing apps appeared.
Thanks very much to Original Poster we can now use Realme UI 2.0 because of him.
Thanks a lot once again