Related
This thread is for helping new comer or beginners with setting up a awesome ICS configuration on their SGS.
Warning:to increase multitasking capabilities of our SGS,Swapping method is used,but by using this method,your sd card life will degrade for sure over time,worst scenerio your SD card can die,you have been warned.(you can change your SD card since it cost nothing compared to our SGS )
Ok,so i have seen people asking about the best ICS rom or configuration for our beloved SGS,so i made this all in one thread how to make ICS run smooth on our SGS.I have been installing roms like hell,tried almost all the roms present out there,finally settled at one.
This guide include installation of rom,kernel,setting up swap partition and activating it,installing mods,and some amazing apps.This can help all the begginers out there.
Definition of smooth rom for me:-
1)Atleast 5 or 6 pages of apps installed
2)Running spb mobile shel or tsf ui as home launcher(though i m in love with tw5 now a days ,but eventually will go to tsf ui,love it )
3)Can multitask games,atleast two of them,possible with the heavy launcher running in the background.
4)Decent battery life
5)Since we are talking about ICS,i would love to have it with the annoying "media scanning bug"
6)Last but not the least,Rom should have every feature and tweaks possible
awwkaayy,so Lets get to it.
Step 1:ROM
Choose correct base ICS rom,i love the stability and speed Tsunamics Rom,so i would suggest you to install that first.I am assuming that you know how to install ICS ,IF possible do a clean install by wiping everything.
Tsunami Rom 2.2
Tsunaics rom in my opinion is the most stable rom i have used,and since is based on aokp,It contains all the latest features.
Step 2:KERNEL
Since we need a multitasking rom,we need a kernel with swap support.
So devil kernel is the one for that.Grab the latest kernel from here.
Devil Kernel
recovery->wipe cache->wipe dalvik cache->install Kernel.
Step 3:Setting up swap(most important)
For the starters,those who dont know what is swap,just say that its a way to increase your ram by partitioning your externel SD card and reserving some space with can be used as ram when needed.The partition used is Linux swap.
For help on partitioning your SD card,Please refer to the following link:
(Tip before you go to that link.Dont make ext partition since it is for a2sd,and we dont particularly need that,just make a swap partion of 512 mb,Its enough for our SGS)
http://forum.xda-developers.com/wiki/SD_card_partitioning
After doing that,go to this link and grab that attached zip.
NOW,
Reboot into recovery with your external sd card inside your phone,and install that zip you just downloaded,and it will show succes if everything goes well and if you did everything as told.Now your swap partition is activated with swappiness value 60.Dont reboot just now,Go to next step.
whats swappiness???google it,60 is the optimum value for it.
Step 4:Setup kernel profiles according to needs
Before rebooting setup up your kernel fully so you dont have to reboot again
i use following configuration.
Recovery->Devil->Performance setting->Smooth settings
Recovery->Devil->misc->Vibrator intensity->Low
Recovery->Devil->Misc->Wifi mode->PM_fast mode.
Done.
NOW your Rom,Kernel,Swap partition is all set up,Enjoy multitasking rom with awesome speed and stability.
To check Swap partition is working or not.
Go to terminal
type su then enter;
type "free" then enter;
It will show you the usage of your swap partition if everything went well.
Step 5:MORE Important tweaks
Most Important one:Correcting Media Bug problem
since on almost all the ICS roms,Eventually this media scanning bug comes up atleast for me,Install Rescan media app from market.
And use it when you get doublets or triplets in your gallery and music player.It comes in handy .
First one:
Flash modem according to your place if you aint getting good signals.i use ZSJPG
since it works best in India.
Second:
Go to Setting->Tsunamics Control->Performance->Scrolling cache->Force disable.
Third:
Settings->developers options->Force gpu rendering->tick;
Step 6:Recommended apps and settings
First:Install Voodoo Control App and set the following config
Headphone amplifier: -3;
bass boost:enable;
gain: +7db;
Dynamic Range full;
color profile:voodoo profile;
Screen RGB multiplier:
RED:2309122400
Green:2309122400
Blue:2701672960
Screen v1 Gamma Hack:
Red= -38;
Green=-41;
Blue=-32;
Tip: if you get green tint,do the following:
keep on increasing V1 gamma hack sliders by 1 or 2(al three of em)
untill you stop getting green tint while locking and unlocking.
Second:Updater app
go to setting->update me->Launchers->download latest touchwiz Ux and flash and reboot.
go to setting->update me->fonts->choose your font and flash.
i use comic sans,looks cool
IN THE END: peace and fun
Now you have ICS on your sgs with bloody lot of customization thanks to AOKP base,a optimized system thanks to robingrg from anroidiani.com,sexy multitasking capabilities thanks to DerTeufel1980 for providing support for swap partition,and system is bloody fast now because of all the above people and tweaks.
Tips:
Important apps recommended to install:
*Quick Desk pro,Sexy app for multitasking,get it and check it,its awesome and cool like
*Battery calibration app;
*Camera ICS;
*Samsung keyboards(Use updater app for it);
*Mx Video Player since we all need a decent video player in the end.
*PowerAmp music player:trust me you can not get more better music quality then this,its just amazing and out of this world music app
*A Decent Task manager,since your ram has been increased virtually so there will be a lot of background apps running
*GO sms Widget,go for reading and replying from home screen only.
*Go power master:nice app for your battery and provide power widget which can expand completely showing all the on off switches,try putting it over Quick Desk pro.
uummm what left????i will add if something comes to my mind...
i guess thats it...
enjoy
okh yep credits
*Samsung for SGS
*AOKP team for base
*robinrg from androidiani for sexy rom
*DerTeufel1980 for his awesome kernel
*bitblaster for his swap partition detecting script
QMobile Noir A9
Fully Working Android Ver. 4.2.2
for QMobile Noir A9, Fly IQ Trend, Myphone A888, Wiko Cink Peax and Intex Aqua Wonder
Good news for those who still have A9 and other mentioned phones in the heading that a much better JB 4.2.2 is available online for download.
This ROM is finalized by a few faces from Forum.Frandroid.com for Wiko Cink Peax (French version) and is not my work at all except that I had to tweak it so that everything works smoothly as in JB 4.1. I had to patch it because when I installed the ROM, it was very laggy and did not allow me to work without frustration. Moreover, I am using A9 hence, build.prop was to be arranged for such requirements too.
You will be installing this ROM at your own risk. I and the developers making it possible will not be held responsible if anything goes wrong. By the way, it is so simple to follow the process so don't worry.
Don't try it on other devices than mentioned above.
Special Thanks to;
1. Qus1, Pratikmore and Kimo06
2. My|Phone for releasing JB 4.2.2 for Amoi N820
3. Google for such a great OS
5. noobpremium for Universal MTK performance package
6. Ryuinferno for Universal init.d Support and other developers whose work is inside this ROM
How to install:
1. Do a full backup of your current ROM before proceeding (this is a precautionary move in case you don’t like the ROM, you can switch back)
2. I will recommend using TWRP Recovery in order to get a full backup including boot, data, system and android secure
3. Now reboot the mobile and manually delete all the hidden folders starting with dot (.) both from internal memory and external memory
4. Rename the folder “Android” to “Android.b” in order to get back your data files of games after installation
5. Restart in TWRP and wipe dalvic cache, cache, data, android secure and system
6. Now install jb2v2-8.zip
7. Later install A9Patch.zip. Other mobile users should not install the zip.
8. Wipe Cache and Dalvic Cache and restart the phone which will take a few minutes to ready the new ROM
9. Fill the information required for starting up the phone
10. Press Menu and start Universal init.d app, allow it root permission and then press Activate , later press Verify to check if init.d is supported.
12. Open Terminal Emulator in ROM Toolbox app and write "su". Give the root permission. Now the icon in emulator will change from "$" to "#". Now write "mtkod" and press enter. Processing will be done and later phone will restart itself.
11. Now all the work is done. You are ready to enjoy the Awesomeness of Jelly Bean 4.2.2
Pros:
1. Lots of Free RAM
2. New Snap Camera app with its Gallery (Stock Gallery is removed due to lack of customization and for auto-focus bug in Video capture)
3. Can fully utilize the Xposed Installer, GravityBox and other exposed apps for theming and animating etc.
4. Tethering, Hotspot, Bluetooth, WIFI and GPS working :good:
5. Better performance and color reproduction due to optimizations in build.prop and MTK performance package
6. Init.d is supported and few scripts are given in the added zips
BUGS:
1. Pinkish Camera result when capturing in low light
2. Slight lag during installing and uninstalling apps. Usage of battery doctor is essential for task killing and battery optimization
3. Others you tell me
DOWNLOAD LINK of the ROM
DOWNLOAD A9Patch.zip
Download Universal MTK performance package by noobpremium
P.S. Don’t PM me if there is any query. Just post your question on this page.
XDA:DevDB Information
AOSP JB 4.2.2 for Noir A9 and WCP, ROM for all devices (see above for details)
Contributors
alirazaagha, Qus1, Pratikmore, Kimo06, Willteck and others
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: JB 2 v2.8
Stable Release Date: 2014-06-24
Current Beta Version: JB 4.2 Beta 1
Beta Release Date: 2013-09-18
Created 2014-09-08
Last Updated 2014-09-15
Boost the Speed
Open ROM toolbox lite then CPU control and choose "ondemandx" as Governor and "sio" as I/O scheduler and check mark "Apply on boot". Now, enjoy a massive boost in performance :highfive:
Warning1
Not working for Wiko Cink Peax 2 (french model)..
It loops on bootanimation (WIKO.....).
Thank.
Bouziane_Dr said:
Not working for Wiko Cink Peax 2 (french model)..
It loops on bootanimation (WIKO.....).
Thank.
Click to expand...
Click to collapse
Sorry bro, your phone is not same as Wiko cink peax (1) and is not compatible with this ROM. You must check out frandroid.com for your phone. There are plenty of ROMs available for your phone.
update the link please.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kit Kat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions:
First time flashing CyanogenMod 11.0 your device, or coming from another ROM?
Download the zip(s).
Optional: adb backup
Perform a NANDroid backup of your current ROM.
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Issues?
Report them on github:
https://github.com/M1cha/android_device_xiaomi_aries/issues
What's important: if you use xposed - pls disable it and try it again because it can cause problems in some cases.
Also the issue must contain important information like your phone model(mi2(s)(c)), and the exact build version of the ROM.
Download Links:
CyanogenMod:
Nightly:
Download: http://download.cyanogenmod.org/?device=aries
Google Apps addon:
Use 4.4 gapps:
Download: http://wiki.cyanogenmod.org/w/Google_Apps
Sourcecode:
ROM: https://github.com/CyanogenMod
Devicetree: https://github.com/CyanogenMod/android_device_xiaomi_aries
Kernel: https://github.com/CyanogenMod/android_kernel_xiaomi_aries
GENERAL COMMENT AND REQUEST:
We ask all the regular contributors here to please answer the "xxx is broken" or "yyy force closes" statements without an attached logcat with something like "LOGCAT or it didn't happen"
Feel free to be creative but DO NOT respond with wipe cache/clear data or any other attempted solution before the reporting user has taken the trouble to actually try to help solve the problem (e.g. by attaching a logcat, detailed steps to reproduce etc.).
We need to force more discipline in how issues are reported which will help us all find and squash bugs that may exist.
Just clearing data etc. may in fact cause us to never find the bug that caused the issue and just makes for lazy users.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 11.0 Nightlies, ROM for the Xiaomi Mi 2
Contributors
m11kkaa
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2014-09-15
Last Updated 2014-09-15
Troubleshooting/ FAQs
I am reading FAQs, am I ok?
You're the best , but I'm not sure how you'll fell after you've read these things...
How can I enable Developer/ Performances Settings?
Go to Settings>Info>Click several times on build
How can I enable 4 way reboot (Recovery, System, soft, Bootloader) ?
Enable developer options, then go to Settings>Developer and enable Advanced Reboot
Why there's no HDR on camera?
Cyanogenmod does not provide closed source software, like drivers for HDR, you need to install Miui camera, or another camera from playstore
Why is there no Play Store or <insert gapp here>?
Since there are 2 system partitions they're small, and kk needs about 800mb to have a rom + gapps. There are 2 things u can do: First: install this gapps package this. Second way: use the repartition script of XiaomiTool to extend them.
Why is performances profile resetted every boot?
You need to enable Settings>performances>CPU>Set on boot
Why the phone doesn't fly if I enable airplane mode?
It's a WIP (work in progress) feature, now it works only if you throw it at 11,2 km/s² toward the space. It looks like there's no fix for this (yet).*
How can I enable adb root?
Go to Settings>Developer>Root access> Apps and Adb
How can I hide apps from trebuchet (launcher)?
Click Menu>Protected Apps> Set a "password"> Hide them
How can I charge my phone?
It looks like the xiaomi charger isn't enough powerful to charge the phone with cm. Here's your fix: buy a small nuclear reactor (you can find a cheap one on amazon or ebay I think), place the phone between the uranium fuel rods, power the reactor on and let the phone charging for about an half hour. It will be charged and it won't discharge again anymore.*
(I'm running art, it's very good and i feel better running it) This app FC... What can i do?
Switch to dalvik
Today I updated the phone and it's in a bootloop now...
Nice to get know you're enjoying art, switch back to dalvik flashing this
Bugs
http://wiki.cyanogenmod.org/w/Known_Issues_page_for_aries
[DEV] How to build
http://wiki.cyanogenmod.org/w/Build_for_aries
Two Releases: Nightlies and Stable/Monthly
Nightlies and Monthlies are very different. YOU CAN NOT UPDATE FROM A NIGHTLY TO A MONTHLY WITHOUT A WIPE /DATA. Why? Simple, M releases uses a different branch and it's much older than the previous Nightly avaible, so this may cause bootloops.
So you can update from a Monthly to newer Nightly, but you cannot update from a Nightly to a Monthly. If you choose unstable branch (aka Nightlies) you shouldn't update via ota to Stable branch (aka Monthly), you need to wipe /data.
Other Info
http://wiki.cyanogenmod.org/w/Aries_Info
I'll be building Slim (and maybe Omni) for this soon, so I was wondering which vendor repo do you use?
Great I use themuppets https://github.com/TheMuppets/proprietary_vendor_xiaomi
Sorry for the possible spam, I just wanted to ask will this be now ''official'' thread for CM11 instead of the one on xiaomi.eu?
SkaldfraNorden said:
Sorry for the possible spam, I just wanted to ask will this be now ''official'' thread for CM11 instead of the one on xiaomi.eu?
Click to expand...
Click to collapse
yes
Hi, a question about TDB: I (stupidly) formatted /sdcard before flashing CM11 (to get rid of MIUI folders), and I lost write permission. To fix that, I enabled TDB and installed MIUI on system2 and booted. However, I will never boot into MIUI again, I'm only interested in CM. Is leaving TDB enabled affects performance in any way? And is there a different way to restore permissions other than flashing MIUI?
isaacbh said:
Hi, a question about TDB: I (stupidly) formatted /sdcard before flashing CM11 (to get rid of MIUI folders), and I lost write permission. To fix that, I enabled TDB and installed MIUI on system2 and booted. However, I will never boot into MIUI again, I'm only interested in CM. Is leaving TDB enabled affects performance in any way? And is there a different way to restore permissions other than flashing MIUI?
Click to expand...
Click to collapse
Sdcard format is not working well on cwm cuz of tdb. U have to flash a fastboot package and or flash a stock miui with miflash.
Tdb doesn't affect performances at all.
Tdb doesn't mess with sdcard at all so it probably is a cwm bug.
Good to see we're moving to XDA!
m11kkaa said:
Tdb doesn't mess with sdcard at all so it probably is a cwm bug.
Click to expand...
Click to collapse
Another scenario in which this bug showed for me was this. Maybe this is useful to track the issue.
I installed CWM 6.0.5.0, and then WIUI (4.7.18) based on KK.
After formatting the sdcard from within WIUI, even without rebooting, at that point the internal sdcard couldn't be written any longer from within WIUI.
I'm using this ROM and i'm really impressed.
One thing though is that my battery is going down much faster than on miui.
Any tips?
Check if you have wakelocks and freeze with greenify
does anyone have problem with Gapps on CM11-M10 like me? Gapps force-close all the time although I had try to reflash the rom 2 times!
you either have to flash a very small gapps package or resize your system partition(s)
thienquang07 said:
does anyone have problem with Gapps on CM11-M10 like me? Gapps force-close all the time although I had try to reflash the rom 2 times!
Click to expand...
Click to collapse
Read FAQs
Great ROM!
So far everything has been running smooth. Performance is great, feels much speedier than Mokee OS. Battery seems to be going down a bit faster, but I've been setting everything up so that probably explains the battery drain.
Something that really annoys me though, is that music playback stutters whenever you touch something. Opening the app drawer, any app, upvoting a post on Reddit Sync, ... Everything makes the music stutter for a split second.
Mavamaarten said:
Great ROM!
So far everything has been running smooth. Performance is great, feels much speedier than Mokee OS. Battery seems to be going down a bit faster, but I've been setting everything up so that probably explains the battery drain.
Something that really annoys me though, is that music playback stutters whenever you touch something. Opening the app drawer, any app, upvoting a post on Reddit Sync, ... Everything makes the music stutter for a split second.
Click to expand...
Click to collapse
Disable "sound on touch"
linuxxxx said:
Disable "sound on touch"
Click to expand...
Click to collapse
Oh god. I'm glad the fix is that simple. Thanks a bunch, I really didn't think of that.
I even disabled the "Okay Google" hotword because according to some googling the issue was connected to that.
Video camera records video maximum 10 minutes. Could it be changed to unlimited?
And also sound quality is very poor in recorded videos. I looked through spectrums and it appears that they are cut above 8000Hz. Seems like on some stage signal is being sampled with 16000 Hz sample rate and, judging by some bubbling and other artefacts, it is made without prior antialiasing filtering. Output format acc 48000 Hz.
Tested on latest xiaomi.eu rom
BEFORE STARTING ALWAYS REMEMBER TO BACK UP THE FILES YOU ARE ABOUT TO EDIT
I AM NOT RESPONSIBLE FOR ANYTHING BAD THAT HAPPENS OKAY
I WISH THIS WERE POSSIBLE ON NON ROOTED PHONES BECAUSE I UNDERSTAND THE PAIN OF HAVING BAD MULTI TASKING
NOW LETS GO
1. Make sure phone is BL unlocked and Rooted
2. Flash latest Xiaomi.eu rom and make sure you have root (via superSU or whatever root app of your choice)
3. Install FX file explorer and FX root add on
4. Go to system/etc and find a file named mcd_default.conf
5. edit the file and delete the lines that are shown here highlighted
open image
6. Save file
7. Enable developer options
8. Find memory optimization and set to HIGH and Reboot
9. Wait for phone to boot back up
10. Go to Developer options in settings and Disable MIUI optimizations and Reboot
11. Install kernel audiotor and go to low memory killer option and select very light and enable "apply on boot"
12. Reboot
13. Go to fx file explorer and go to system/build.prop and edit the file - find the line persist.sys.whetstone.level=2 and change it to persist.sys.whetstone.level=0 and save file and reboot
14. Test it out yourself
EXPLANATION
Basically the lines that are deleted in the mcd_defaullt.conf makes sure that ALMOST ALL APPS are killed whenever you launch a system app like PHONE, MESSAGING, GALLERY. In AOSP roms this is not the behaviour, instead AOSP picks the least used app or the earliest app used to be killed when LMK (Low memory killer) values are reached. Deleting the lines brings back this AOSP behaviour. Benefit of MIUI is you can LOCK APPS IN MEMORY using the task manager/recent and now MIUI will kill the earliest used app in the recents/task manager that are NOT locked.
EXPLANATION NUMBER 2 REGARDING CHANGING LMK BEHAVIOUR USING KERNEL AUDITOR
The stock LMK values are not set by xiaomi or MIUI, instead it is automatically generated by ANY AOSP rom because it uses a ratio system. If the ram is big (like ours 3gb) than the ratio values will be higher. MIUI or Xiaomi should have fixed this but they didnt. SO PLEASE CHANGE THE LMK VALUES IN KERNEL AUDIOTOR
EXPLANATION NUMBER 3 REGARDING WHETSTONE
Don't uninstall or freeze this app. IT DOES NOT HELP OR AFFECT MULTITASKING AT ALL. DELETING IT WILL DISABLE MEMORY OPTIMIZATIONS
REMINDER
MIUI is a very RAM hungry OS so please dont expect a lot of free ram but unused ram is wasted ram anyway
Ok, first of all i just want to thx for this guide... but... it's not working.
Redmi Note 4 with MIUI EU 8.1.3.0 Stable.
I tested it for about 1day and here are my feedback:
- Phone hangs and become unresponsive quickly. I kill all apps, but still lags. If i restart the phone, then is ok for a while...but after i open again some apps, games, will die in huge lagging.
- Camera lags, google play lags, facebook lags.
- Fingerprint unlock have 1-2 sec onds delay. Never ever have this problem again.
- Battery is the same, no improvements here.
I finished after one day, restoring my backup.
I done all the steps, exactly in your way and your order. My feeling is that memory are not fully released, even if i kill all the apps.
I will test next every part in this guide, independently, to se how is doing...
x3m.zone said:
Ok, first of all i just want to thx for this guide... but... it's not working.
Redmi Note 4 with MIUI EU 8.1.3.0 Stable.
I tested it for about 1day and here are my feedback:
- Phone hangs and become unresponsive quickly. I kill all apps, but still lags. If i restart the phone, then is ok for a while...but after i open again some apps, games, will die in huge lagging.
- Camera lags, google play lags, facebook lags.
- Fingerprint unlock have 1-2 sec onds delay. Never ever have this problem again.
- Battery is the same, no improvements here.
I finished after one day, restoring my backup.
I done all the steps, exactly in your way and your order. My feeling is that memory are not fully released, even if i kill all the apps.
I will test next every part in this guide, independently, to se how is doing...
Click to expand...
Click to collapse
u have to use the latest xiaomi.eu rom
the stable 8.1.3.0 has a bug where the dev still classified the rom as having 2gb of ram only (we have 3gb variant as well) (i read this somewhere i forgot where) and the latest china dev xiaomi.eu rom has this bug fixed for our device. Try this tweak with memory optimization on LOW but remember use the LATEST xiaomi.eu rom. Phone is working wonderful on my device
also try freezing battery saver via Link2SD. This is the only other thing I have changed on my device
x3m.zone said:
Ok, first of all i just want to thx for this guide... but... it's not working.
Redmi Note 4 with MIUI EU 8.1.3.0 Stable.
I tested it for about 1day and here are my feedback:
- Phone hangs and become unresponsive quickly. I kill all apps, but still lags. If i restart the phone, then is ok for a while...but after i open again some apps, games, will die in huge lagging.
- Camera lags, google play lags, facebook lags.
- Fingerprint unlock have 1-2 sec onds delay. Never ever have this problem again.
- Battery is the same, no improvements here.
I finished after one day, restoring my backup.
I done all the steps, exactly in your way and your order. My feeling is that memory are not fully released, even if i kill all the apps.
I will test next every part in this guide, independently, to se how is doing...
Click to expand...
Click to collapse
also thanks for feedback which is very important in testing tweaks
asusm930 said:
u have to use the latest xiaomi.eu rom
the stable 8.1.3.0 has a bug where the dev still classified the rom as having 2gb of ram only (we have 3gb variant as well) (i read this somewhere i forgot where) and the latest china dev xiaomi.eu rom has this bug fixed for our device. Try this tweak with memory optimization on LOW but remember use the LATEST xiaomi.eu rom. Phone is working wonderful on my device
also try freezing battery saver via Link2SD. This is the only other thing I have changed on my device
Click to expand...
Click to collapse
I use EU Stable 8.1.3.0 ROM for about a week and never had problems or any bugs. None!
I will try this again on EU Dev 6.12.15 today to see how is doing...
x3m.zone said:
I use EU Stable 8.1.3.0 ROM for about a week and never had problems or any bugs. None!
I will try this again on EU Dev 6.12.15 today to see how is doing...
Click to expand...
Click to collapse
I just tried this just now on a clean flash of latest EU ROM
1. memory optimization on LOW
2. Use link2sd to freeze battery optimizer app
3. Delete this line from mcd_default.conf in system/etc directory https://drive.google.com/file/d/0B_Q4QjvbODxoS2RnRmRWTDk3TE0/view?usp=drivesdk
4. Set LMK Low Memory Killer value to medium on Kernel Auidotor
And thats it with the same result as my previous tweaks. I think this will resolve the lag that you are facing
Ignore my previous steps on this thread and follow these new ones. Good luck
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
download file: https://drive.google.com/drive/folders/1EQBGyBQ_-0LP_rP6-pRBAniEmiWmo8TY?usp=sharing
And Here is the Step For Flashing J6 And 7870
Follow the steps to install the rom.
1: Download the zip file And Unzip it! i pack the all file in one zip
2: boot to ofox and follow the steps
- go to wipe
- choose system, data ,dalvik&cache, cache and vendor
- and wipe it
3: flash the rom on the system partition and wait few mins
4: flash the yumi vendor and wait it
(No Need Install another kernel, if you want another kernel, you can flash it.)
And Reboot the system now
(optional: if you want root, flash magisk, Dont flash Gapps , included.)
ScreenShot
https://t.me/carelozcheng /URL]
Thanks the system for tipzteam
@bennychs61 Please check your PM inbox. Thank you.
-Regards: Badger50
THANK YOU im testing it, just flashed thanks
You shared an img file which you didn't mention about flashing but when I flashed it my phone kept turning on and off.
Hi @bennychs61, first of all thank you for this amazing development. The rom feels good however Yumi vendor does have some drawbacks but does not mortify the user experience. Amazing rom but still requires a few tweaks to tune it out universally.
Here are a few issues I faced -
1. 4G Mobile data does not work
2. Lot of stutters when opening various apps
3. There seems to be some issues with processor tuning due to which the phone heats up during small workloads
4. Like many roms the compass does not work which is fine as it is not a major necessity
5. Display refresh hertz does not match which creates some jittery animations
The issues listed above are common to a lot of roms including EvolutionX 4.1, HavocOS 3.3 and versions 4.0 and 3.0 respectively. However I see a lot of potential in this rom because if we ignore the issues above then this rom seems like an all rounding win.
Tested on J600G. TWRP 3.2.3
+A few jokes hidden in the settings were good.
PixelPerfect24 said:
Hi @bennychs61, first of all thank you for this amazing development. The rom feels good however Yumi vendor does have some drawbacks but does not mortify the user experience. Amazing rom but still requires a few tweaks to tune it out universally.
Here are a few issues I faced -
1. 4G Mobile data does not work
2. Lot of stutters when opening various apps
3. There seems to be some issues with processor tuning due to which the phone heats up during small workloads
4. Like many roms the compass does not work which is fine as it is not a major necessity
5. Display refresh hertz does not match which creates some jittery animations
The issues listed above are common to a lot of roms including EvolutionX 4.1, HavocOS 3.3 and versions 4.0 and 3.0 respectively. However I see a lot of potential in this rom because if we ignore the issues above then this rom seems like an all rounding win.
Tested on J600G. TWRP 3.2.3
+A few jokes hidden in the settings were good.
Click to expand...
Click to collapse
Gsi is Not For The Device To Make The system
Have Bug is Normal
bennychs61 said:
Gsi is Not For The Device To Make The system
Have Bug is Normal
Click to expand...
Click to collapse
I didn't quite get you