Related
The volume up down thing didnt work for me.
Sent from my SPH-P100 using XDA App
Really no comments?
Sent from my SPH-P100 using XDA App
Sprint Activation
By activation I am assuming you mean gain network access to the Sprint data system? It should have prompted you for activation data at boot. Try through settings to connect to the mobile network and that should reinitiate the activation process. Not sure if this helps...
Sprint Activation
By activation I am assuming you mean gain network access to the Sprint mobile data system? It should have prompted you for activation information at boot. Try through settings to connect to the mobile network and that should reinitiate the activation process. Not sure if this helps...
Thanks for the reply. I meant I bought the Tab without a data plan and do not wish to. It keeps trying to activate but cant. I am looking for a way around it.
Sent from my SPH-P100 using XDA App
I've been grappling with this for a while now, and unfortunately, the activation process can only happen if you were to have service. You could, thanks to Sprint's 30 money back guarantee, buy a month of service, activate your device, and then cancel the service within a few days and you won't be charged. Of course, this invovles spending a whole lot of time on the phone with Sprint, or going into a Sprint store, which you may not want to do. Don't worry though, there is another option.
I decided I didn't want to go through any hassle, so I spent some time fooling around with the system and came up with the following method. It took me a while to in the application manager to track down the programs responsible for the activation prompt, but I found them. What you need to do is this:
NOTE: I have tested this on the SPRINT Tab with the latest software.
*DO NOT uninstall any of these apps, just "Freeze" them. If you delete any, you may loose the ability to do firmware and Android OS updates!*
1. Root your Tab, (preferably with z4root), I suggest using the "permanent root" option.
2. Go to Menu -> Settings -> Applications -> Development -> and check "USB Debugging"
3. Install Titanium Backup
4. Run Titanium Backup and go into "Backup/Restore" Look for "Software Update 1.5.0" in the list.
5. Tap the application name.
6. On the window that comes up, select "Freeze" It will give you a confirmation of success and the "Freeze" button will change to "Defrost" now hit the back button.
7. Locate "Sprint Installer 2.0", "Sprint Zone SZ 2.1.11", and "System Updates 1.0.0" Repeat steps 5 and 6 for each of these applications.
8. Close Titanium Backup
9. Restart
Now the activation prompt will not come up and it won't interrupt you when using your Tab. It doesn't affect anything if you plan to use the Tab off-contract with Wifi only.
I chose to "Freeze" the apps because it denies them access to the system, which removes the activation problem. I didn't uninstall them, though because if you want to activate it on the network at any time later, or you need to do a Firmware/Android OS update through official channels, you may need these apps.
If you want to undo this at any time, follow the directions the same way, but during step 6 select "Defrost" instead of "Freeze"
I hope this helps.
Thanks
Works great! Thanks for the info.
It´s posible active the phone
rkmj said:
I've been grappling with this for a while now, and unfortunately, the activation process can only happen if you were to have service. You could, thanks to Sprint's 30 money back guarantee, buy a month of service, activate your device, and then cancel the service within a few days and you won't be charged. Of course, this invovles spending a whole lot of time on the phone with Sprint, or going into a Sprint store, which you may not want to do. Don't worry though, there is another option.
I decided I didn't want to go through any hassle, so I spent some time fooling around with the system and came up with the following method. It took me a while to in the application manager to track down the programs responsible for the activation prompt, but I found them. What you need to do is this:
NOTE: I have tested this on the SPRINT Tab with the latest software.
*DO NOT uninstall any of these apps, just "Freeze" them. If you delete any, you may loose the ability to do firmware and Android OS updates!*
1. Root your Tab, (preferably with z4root), I suggest using the "permanent root" option.
2. Go to Menu -> Settings -> Applications -> Development -> and check "USB Debugging"
3. Install Titanium Backup
4. Run Titanium Backup and go into "Backup/Restore" Look for "Software Update 1.5.0" in the list.
5. Tap the application name.
6. On the window that comes up, select "Freeze" It will give you a confirmation of success and the "Freeze" button will change to "Defrost" now hit the back button.
7. Locate "Sprint Installer 2.0", "Sprint Zone SZ 2.1.11", and "System Updates 1.0.0" Repeat steps 5 and 6 for each of these applications.
8. Close Titanium Backup
9. Restart
Now the activation prompt will not come up and it won't interrupt you when using your Tab. It doesn't affect anything if you plan to use the Tab off-contract with Wifi only.
I chose to "Freeze" the apps because it denies them access to the system, which removes the activation problem. I didn't uninstall them, though because if you want to activate it on the network at any time later, or you need to do a Firmware/Android OS update through official channels, you may need these apps.
If you want to undo this at any time, follow the directions the same way, but during step 6 select "Defrost" instead of "Freeze"
I hope this helps.
Click to expand...
Click to collapse
Hi there, Do you think is´t posible to liberate the phone?
This is EXACTLY what I was looking for! Worked GREAT! Thanks!
... but I have a question regarding 2 of the items that are frozen now. like the Software Update 1.5.0 & System Updates 1.0.0 --- are they specific to sprint? what exactly are these for and why do these have to be frozen in order to disable the sprint activation? will i still be able to get firmware updates and all that jazz?
if i want to check for updates, do i need to defrost these?
How to get root app
maybe I'm missing something but how do you get the root app. I.e. to bypass activation you need a root application. However I can't find a way to download apps without the tab being activated. Seems like a paradox. In a nut shell how can I get the z4root application installed when the tab is not yet activated?
Thanks for any help
You can always turn on the WiFi, and connect it to an available network to gain access to the Market.
I too have been struggling with the activation prompt, and since Rooting is still somewhat touchy with our SPH-P100, I've found that the best answer is to put your Tab in Airplane mode, and manually turn on the WiFi. This will keep any options you're unsure of on the back burner 'til the devs here have some more time to save money for, and play with the Tab!
MSteinmetz said:
maybe I'm missing something but how do you get the root app. I.e. to bypass activation you need a root application. However I can't find a way to download apps without the tab being activated. Seems like a paradox. In a nut shell how can I get the z4root application installed when the tab is not yet activated?
Thanks for any help
Click to expand...
Click to collapse
You can find z4root here http://forum.xda-developers.com/showthread.php?t=833953
I have a Sprint tab, and if you hit cancel on the activation each time you turn the device on, you can still access your home screen and all the apps and enable wifi to access the market.
To permanently bypass activation, side load & install the z4root app from the link above and install Titanum Backup from the market .. follow the instructions posted by rkmj earlier in this thread.
kamgrn said:
This is EXACTLY what I was looking for! Worked GREAT! Thanks!
... but I have a question regarding 2 of the items that are frozen now. like the Software Update 1.5.0 & System Updates 1.0.0 --- are they specific to sprint? what exactly are these for and why do these have to be frozen in order to disable the sprint activation? will i still be able to get firmware updates and all that jazz?
if i want to check for updates, do i need to defrost these?
Click to expand...
Click to collapse
Sorry for taking so long to respond to this, but my XDA notification settings were all screwed up. I just realized that you asked this. Software Update 1.5.0 and System Updates seem to be Samsung apps that are tied directly to Sprint Zone and the activtion prompt. They run periodically and when they activate, they query Sprint Zone to see if the device has been activated on the network. In order to stop the activation prompt, these need to stop running.
I can't really tell about firmware updates just yet. Based on the way Sprint generally provides them, you will have the option of OTA or via PC. With this fix in place, you will need to run the update via the PC. If you wanted to get the firmware updates OTA, you will need to defrost the programs. Unfortunately, you will also have to activate the device.
My method doesn't change anything on the device. It just disables the prompt. In order to receive anything OTA, you will have to activate the device. I have a theory about how you can both disable the prompt and still query for OTA updates, but I have to do a bit of testing first. I will post back here once I have tested it completely.
And every other step you need to transform and gain control of your stock ROM!
Given the fact that T-Mobile and Samsung have made it clear that the Galaxy S Vibrant will not receive Gingerbread, Honeycomb, ICS, or any other functionality update, I made the decision that it was finally time to root my beloved phone.
I didn't want to root for the purpose of trying a ROM for any of the above OS's. I merely figured that since there are not going to be any future updates to my phone, I'm basically on my own. And if I'm on my own then I can and should get rid of the TMo crap software that came pre-installed on my phone (and which can't be uninstalled by any normal means).
Hopefully this process might also help make my phone operate a little faster and cleaner. And in general, the rooting process would give me full control over my own phone. But if you have ever rooted a device the experience can sometimes be challenging, even for tech-savvy folks like me.
There are lots of sites for advice and how-to’s on rooting your Android device, but most of these sites run you through the process in a way that assumes all will work perfectly the first time. There aren't a lot that take you through the root process with at-hand solutions to many of the commonly reported errors.
I've just finished rooting my stock TMo Vibrant, fixing signature/Multi-CSC issues from the root process, installing and using Titanium Backup (TB) PRO to handle bloatware, and finally installing ROM Manager for the purpose of installing ClockworkMod Recovery (for creating and restoring backups of my current ROM). WHEW! And while it's all fresh in my mind, I'm writing it all down to share the process with you so that it's all in one convenient place.
Let’s Start With Rooting The Phone By Using Super Oneclick
After doing some reading in the XDA forums and a few other places, I wanted to try rooting with a one click option. There are many out there that are available for use. But the very first issue that plagued my rooting process was the incompatibility of many of these root installers with my home Win7 64bit pc.
I tried downloading and extracting various recommended solutions that use the "one click" functionality (Super Oneclick--various versions with and without drivers, Galaxy S One Click Root, and Vibrant One Click Root). I also downloaded and installed AIO Vibrant Toolbox, a program which also features a “one click” method for rooting a Vibrant once it has been installed on your pc.
What many posts on rooting never really mention with these methodologies is that you might have issues running the programs on a Win7 machine, which was my issue. Not all Win7 machines, but some. I downloaded the zip file for each with generally with no issue. * But once I tried to run the exe (best done via "Run As Administrator"), I got the following error message on virtually all of them:
"CLR Error: 80004005 The program will now terminate"
AIO Vibrant Toolbox wasn’t any better even though it was an installed program. It terminated as well.
(*NOTE: Anti-virus programs will mistake parts of the root zip files for Trojans, usually quarantining them after download. You are then left with the uncomfortable choice of turning off your anti-virus and taking that chance, or looking for another zip solution. I opted for the latter. Never take a chance with a Trojan!)
These errors messages did not show up on my work pc which is also Win7 64-bit. But that was no comfort as most of my root work was going to be done at home. After much searching on the internet, I read a random post that mentioned two helpful suggestions:
Use a rear or powered USB port, not a front port (because they often can’t power the root install sufficiently)
Use Super Oneclick v1.7 as opposed to any newer versions. The newer versions can cause problems with this particular Galaxy S root.
Two simple suggestions that made a world of difference! The root process worked smoothly afterward, and was finally a "success".
Reminder - Remember to put your phone into USB Debugging mode for the root process, and don’t mount the external SD card when attached.
Along the way to “rooting” you might be confronted with messages about your Samsung drivers for your phone. You may see messages like these:
Device drivers not found
Samsung android USB composite device failed
A quick search on these forums will yield updated drivers for your phone. The successful install of these drivers can also be a function of using the proper USB ports, as in the situation above. The installation of Samsung drivers failed on the front USB ports of my Dell. Success was again found using the rear ports. The main point here: use the rear ports (or powered USB ports) no matter how much of a pain it is maneuvering under your desk and behind your pc!
You’re Almost There…Kinda!
You can check to see if you are successfully rooted by checking to see if Superuser is installed in your apps. It was there… whew. The next step was to install Titanium Backup so that I could have root control over my apps, allowing me to delete bloatware that was slowing my phone. I downloaded TB from the Market, opened it, tried to give it Superuser permissions, and was notified with an error message that permissions were unsuccessful because the phone was not rooted. WHAT???
More online research revealed that I had achieved a “soft root”, whereby you have successfully rooted your phone but you don’t have all root permissions because the install wasn’t complete. The solution? Basically you just have to keep doing it more than once. All steps of this process seem like they will take the first time if you do what you are supposed to do. But more often than not, you have to repeat your steps over and over to make sure that it takes. After two more Super Oneclick rooting attempts, TB finally gave me the thumbs up for root.
Some may say it’s not necessary, but I upgraded to TB PRO. It allows for more options and better functionality with the apps and system data on the phone. And really, at about 6 dollars it is more than worth the price. Heck, two Starbucks lattes will run you more than 8 or 9 bucks. So if I can get piece of mind with respect to app management on my newly-rooted phone, 6 bucks is more than worth it.
I immediately wanted to learn how to remove bloatware -- and it’s amazingly difficult to find clear directions on doing so. After my backup of all apps and data, I went to the backup/restore tab and found the programs I wanted to get rid of. Many online users recommend “freezing” an app first to make sure that removing it won’t make your phone all wonky. So after “freezing” the offending apps (by pressing the menu button, selection batch, and then scrolling down to the appropriate section on freezing apps), I long-pressed the desired app and only saw one option for uninstalling via an exploit. I selected it and long story short, it failed. As the phone boots to stock recovery, this message popped up:
E:failed to verify whole-file signature
E:signature verification failed
Applying Multi-CSC Installing
Multi-CSC Installation Aborted
In simple terms, the rooting tool (Super Oneclick) doesn’t contain all of the necessary items for a complete root. A fix is needed for the invalid signature problem that will help you get to a full root state. Fortunately there are fixes out there you can find for this particular fix.
Here are some helpful links:
http://androidforums.com/galaxy-s-a...iled-installation-aborted-one-click-root.html
http://forum.xda-developers.com/showthread.php?t=1052991
Read the instructions for the fix on the first page, but get the correct file from the second page as the link for the fix from Dropbox is a little messed up in the first URL. The second URL has the correct link. Use the automatic method so that you don’t have to use the terminal emulator. If you are like me, this process has already given you more gray hairs than you would really like to admit. So take the easy route.
Run the install.bat file and you will be fine. When you reach stock recovery again remember to reinstall all packages. This will make sure that the fix is installed properly. I didn’t know that was needed and was wondering why the fix wasn’t taking initially. So I’m sharing this with you to head off your frustrations at the pass. ;-)
Getting Rid Of The Bloat
Check to make sure that you are fully rooted by opening TB. It will automatically take Superuser permissions from the first time you allowed it IF you are rooted. If not, it will tell you. And by now you should be rooted. Heading back to the bloatware, I was able to figure out that the “long press method” was not the correct one for uninstalling apps.
Once again, press the menu button (bottom left) and select batch. Scroll down and you will see a section for uninstalling apps. Select uninstall user and system apps, and make sure to DESELECT ALL before you do anything else. From there you can pick and choose the apps to uninstall, then “run the batch operation” to complete the task. Bye bye bloatware!
The last crucial step to complete now that your phone is rooted is to make sure that you have a backup of your current ROM and configuration. The backup you created using TB is only for apps and data. It is not a backup of your current stock ROM.
Nandroid backup works best for the purpose of backing up and restoring ROMs. And if you have done any previous rooting on an Android device, you will recognize that Nandroid is a function of ClockworkMod Recovery. Sigh. I know... frustration starts to set in as you realize that there is yet another necessary install needed for a totally successful root process ON TOP OF and AFTER everything else you have had to do. So what is the next step?
ROM Manager To The Rescue
Install the free ROM Manager from the Market and you will be good to go. This app allows you to flash CWM Recovery as well as mount various ROMs on your phone. After installing the app (and declining the various offers that pop up), press “Flash ClockworkMod Recovery” at the top of the menu. It will cause the phone to reboot. And CWM will be downloaded…but not installed. To install after reboot, open ROM Manager and now select Reboot into Recovery. It will challenge you with a question on whether you really want to do this or not. Say Yes.
Important: This is another one of those places where it’s not intuitively obvious what to do for CWM Recovery.
When I first rebooted into recovery I didn’t see any changes from my stock recovery menu…because there were none. What I needed to do (which I found in yet another forum posting) was again to select Reinstall all packages. CWM had been downloaded and was ready to install… this would do so.
Happily, the phone went into Clockwork recovery*immediately after "Reinstall all packages" . If it wasn't clear earlier, use the volume buttons toggle up (or down) to select backup/restore. *You can then implement your selection by pressing the power button on the right side of the phone. On the next screen select backup, and then let it do its’ thing. It may take a while to complete, but will be well worth the time and effort if you have any future problems.
The Entire Process Is Finally Complete
So there you have it. In a nutshell, here were my steps:
1. Samsung drivers
2. Super Oneclick v 1.7
3. E. Signature fix
4. Titanium Backup PRO
5. ROM Manager (free version)
Use the rear USB ports or powered USB ports for the phone connection. Phone should be in USB debugging mode, and external SD card should not be mounted. For each process, it may take up to 2 or 3 attempts for successful completion. So keep trying after the first FAIL message. When applicable, “Reinstall All Packages” to make sure that downloaded files are actually installed.
And lastly, if absolutely nothing works correctly for you, PLEASE PLEASE PLEASE use Google for help. Many others have successfully worked through all of the problems you might encounter that aren’t listed here. Actively use Google to help find solutions to any problems, using the exact error messages shown and adding in your phone type. You will be amazed by the depth of experience out there that can help you.
Above all else, keep up a good attitude. Rooting might be a pain in the ass while you are doing it, but it’s for a greater purpose. My four days of rooting have now given me a phone that is FREE from all the bloatware that bugged me for the past two years. And soon I’m sure I will experiment with a different ROM. But for now I’m just happy that I have my phone, my way. After all, if they (TMo and Samsung) aren’t going to make our phones better, we can do so for ourselves.
Good luck, and I hope this complete set of instructions from my own past 4 days of experience will help someone else!
A good read. A few things though with the Titanium part.
First I whole-heartedly agree to kick down the $ for the Pro. It really ups the functionality of the app and what all it can do.
The part about "freezing". This part is tricky b/c you need to make sure he apps that you are freezing are indeed bloat and not something that is needed for something else (i.e. did you know that GTalk directly effects the market on some ROMS). I don't use Gtalk but I still have it installed and frozen so I can defrost at will. This is the reason for Freeze. It lets you know of any adverse effects on your ROM, other apps,...then you have the option to defrost if need be. I also always avoid doing anything in "Batches" on TBPro, as it can sometimes be a little wonky, especially when restoring batches, causes reboot and freezes resulting in batterty pull.
I freeze for at least a week on new ROMs so that I get the full experience with daily life to make my determination on uninstall, defrost or wait longer.
Another way to do it is once you know the apps that are frozen do not effect any other parts of your ROM, you can back them up with TBpro for later use and uninstall or you can do it this way. Since you have root, go into /system/app or and pull the APK out and put it in a folder or something like that on your SD card. You would do this to some of the /system apps that TB shows as only haveing a checkmark next to and not the yellow/orange circle with the M in it. If you uninstall these with the checkmark you will not be able to restore them b/c part of the executable portion of the APK is not able to be backed up. This is the reason to pull the app out of /system/app and put it on your SD card. Hit menu, more, Clean up Dalvik cache and viola!! you have some free space on /system and the offending APK's dex will be deleted too.
Sidenote: I have never been able to get SuperOneClick to work on any phone I have ever tried. Maybe I'll unroot and try again but the SU exploit is a flashable zip located here. Option A. Put it on your SD card, boot into recovery and Bam!!! you are rooted
Nice work though.
Where can we still get Super Oneclick v 1.7?
http://forum.xda-developers.com/showthread.php?t=739300 make sure you have ADB turned on and use the USB ports from the back not front
too lengthy.
Just got vibrant
Sent from my SGH-T769 using xda app-developers app
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Delete..
** DISCLAIMER: I AM NOT A DEVELOPER. I DO THIS AS A HOBBY AND SHARE MY FINDINGS IN CASE SOMEONE ELSE FINDS THEM USEFUL. **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **** These scripts are written for Kitkat. Do not use on Lollipop. ** What is new (9/7/2014)
Version 4 provides more Samsung bloat removal, Google bloat removal, and as a bonus it can disable the power on sound.
Background
Samsung has a program running on most of its devices that pushes "Security Updates" onto the device. If you make the mistake of accepting this security update, even after you root your tablet, it will patch the hole and you will never be able to use towelroot or any other know exploit as of June 2014 to root your it again. So this must be immediately disabled after a successful rooting.
Your tablet is also equipped with Knox. One component of Knox is in the bootloader and checks the integrity of the recovery and kernel. If it sees anything has changed at that level it trips the knox flag immediately, which is irreversible. That component can almost never be touched. The second component runs when the OS is up and running and its main task is to monitor the activities of the apps in your system and shut them down if they act "suspiciously". When you are rooted and install SuperSU, this element of Knox keeps detecting the background root activities and shuts them down and gives you warnings. There is therefore a high level of risk there if you let root and knox exist concurrently. So after rooting, this second component of Knox should normally be disabled.
Finally, there are useless junk apps that most of us agree Samsung should have never shipped with the tablet, or even if they are useful we want them gone to get a better battery life.
I will call all of the above (updaters, Knox, and useles junk) bloatware. The scripts attached here can disable or enable the bloatware on your tablet, which comes in handy if you do not have Titanium Backup Pro to freeze or remove bloatware. And since someone will ask at some point, no, it won't trip your Knox!
Please read below and understand what this script disables before you use it. There may be an app on the list that you may actually want to keep.
Requirements:
Rooted Samsung Note Pro 12.2, SM-P905 international model.
Android Terminal Emulator: https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en
The international version (P905) is tested with baseband P905XXUANA7, build P905XXUANC3 .
The ATT version (P907A) is tested with build KOT49H.P907AUCU1AND7 (thanks to @gerard0986 for testing the script)
Makes sure you download the version that is suitable for your tablet. It may work to varying extents for other models and firmwares.You try and tell me
If you are using models other than P905 or P907A, I can make a new script for you if you provide me with a "ls -R -l" dump of your /system, or even better, if you post your firmware somewhere online.
Download link:
Attached below
Instructions:
Generally speaking, you should always have a Nandroid backup before trying anything new. Also have a flashable ROM handy. I am not responsible if you brick your device while using these scripts.
To debloat:
1- Unzip the attachment and copy debloat.sh to your phone at /sdcard
2- Run the terminal emulator and type the following:
su
cd /sdcard
sh debloat.sh3- Choose what you want to disable, or exit.
4- If you choose not to exit, the code does its thing and reboots your tablet. The bloat is gone now
To restore the bloatware:
1- Unzip the attachment and copy enbloat.sh to your phone at /sdcard
2- Run the terminal emulator and type the following:
su
cd /sdcard
sh enbloat.sh3- The code will warn you:
Are you sure you want to restore the security/firmware/software updaters, and Knox?
They may immediately patch your system and make the existing root methods impossible to apply.
Then you can choose what to enable, or just exit.
4- If you choose not to exit, the code does its thing and reboots your tablet. The bloat is back now
Note that while running the debloat script you may get force-closing popups. This is normal; after all you are disabling these applications!
Limitations:
If you have previously removed bloat using other means this script CANNOT recover it for you. enbloat.sh can only restore what debloat.sh has disabled.
If you have debloated using an older version of this code and you want to try a newer version of it, first use enbloat from the older version to return everything to the original configuration and then use the newer version.
When you are restoring the bloat, it is best to enable "airplane mode" so that your tablet does not try to patch your system with a security update without your knowledge. You can disable the airplane mode after you debloat again.
Change log
V5:
Typos fixed.
=============
V4:
Option to disable all Google services except Youtube, search, map, and TTS
Option to disable/enable Power on sound
=============
V3:
The scripts give separate options to enable/disable these groups of bloatware:
1- Updater/knox
Firmware Upgrader, Local FOTA, Security Manager, FOTA Client, Security Update Client, Samsung Push Client, Samsung Software Update, Knox and its related apps
2- Samsung bloat
ANT, Blurb, ELM Agent, Samsung Apps apk and widget, Job Manager, Samsung cloud backup files, Context Provider, S Finder, S Voice, Samsung Account Service, aaIgnite_1.5.15_singtel, weplay_1.3.162, PCWClientS18
3- Other bloatware
Accuweather, Bloomberg, Dropbox, Evernote, Flipboard, NY Times, Remote PC, ,Travel Service, Twitter, WebEx, Line, Pinboard Scratch book, SNS, eMeeting
=============
V2:
The scripts give options to enable/disable updater/knox and other bloatware separately.
Added these to the disable list of V1:
SecurityManagerService, aaIgnite_1.5.15_singtel, weplay_1.3.162
=============
V1:
The script disables the following:
Firmware Upgrader, Local FOTA, FOTA Client, Security Update Client, Samsung Push Client, Samsung Software Update, Knox and related apps, ANT, Blurb, ELM Agent, Remote PC, Samsung Apps apk and widget,Travel Service, Twitter, WebEx, Line, Samsung cloud backup files
PCWClientS18, Scratch book, S Finder, SNS, Samsung Account, eMeeting
Would this work for the T-900 version too?
What do I need to get the info required to get a script made for the sm-p907a model? I read above post but the list of things required were above my head lol.
Sent from my SAMSUNG-SM-P907A using XDA Free mobile app
iNiREALiZED said:
What do I need to get the info required to get a script made for the sm-p907a model? I read above post but the list of things required were above my head lol.
Sent from my SAMSUNG-SM-P907A using XDA Free mobile app
Click to expand...
Click to collapse
1- What is your firmware version?
2- Open the terminal emulator and type the following commands in there:
su
cd /system
ls -R -l > /sdcard/sysdump.txt
Then pm the file sysdump.txt which is saved on your sdcard to me.
thank you
Thank you najoor for the neat script, it executed successfully on my sm-p905 (UANE1 rom) & removed the useless software, it saves a lot of time removing them manually.
Nice work
Hope to see a version for the SM-P907 soon.
Rockytop00 said:
Would this work for the T-900 version too?
Click to expand...
Click to collapse
I think the only existing models are SM-P900, SM-P905, SM-P907A and SM-P905V. I don't know what T-900 is.
If you are referring to model P900 (wifi only) this code may partially work but a lot of files are different between the two models so the outcome is a partial debloat. If you want, you can make a system dump file as I suggested in this post http://forum.xda-developers.com/showpost.php?p=55029414&postcount=5 and send it to me so I can make a custom code for you.
Edit: It appears that T900 is the Tab pro model which is a different device. This thread is for Note pro 12.2 and since I do not own a Tab Pro I cannot answer this question. Perhaps help can be found in the XDA's Tab Pro forum at http://forum.xda-developers.com/galaxy-tab-pro-12-10-8. or try these scripts as they are and see if it works for you.
Hey najoor, Im hoping that you can help me debloat my galaxy tab pro 12.2 sm-t900. I just bought it today and am shocked at the amount of bloatware thats included lol.
Basically I want everything removing that I can install through googleplay, leave the default browser.
Here is the log that you mentioned to the other guy also:-
View attachment sysdump.txt
Ill try to pm it also, really hope you can help out.
Pixel
Debloat method
I used this method but i accidentally uninstalled all google services, and google play store was apart of that, is that normal? And if it is are there ways to get it back?
stockerrodney said:
I used this method but i accidentally uninstalled all google services, and google play store was apart of that, is that normal? And if it is are there ways to get it back?
Click to expand...
Click to collapse
Yes, that is part of bloat removal. To get Google bloat back run the enbloat.sh script and hit y when it prompts you about restoring Google bloat.
stockerrodney said:
I used this method but i accidentally uninstalled all google services, and google play store was apart of that, is that normal? And if it is are there ways to get it back?
Click to expand...
Click to collapse
najoor said:
Yes, that is part of bloat removal. To get Google bloat back run the enbloat.sh script and hit y when it prompts you about restoring Google bloat.
Click to expand...
Click to collapse
If i do the enbloat method will i have to reinstall knox ? Or will i still be able to keep it off?
When you use the enbloat.sh you only restore the stuff you choose. You don't have to restore everything. In your case you leave knox and other things out and only answer yes when it asks you if you want Google bloat to be restored.
The script is very user friendly. Just run it and follow the instruction. And just to give you peace of mind, these scripts do not delete anything from your system permanently so don't worry about breaking your system.
Any chance you could add the option to remove individual items?
http://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294
Debloat v5.0 removed Scrapbook from Air Command
The debloat worked fine but the Scrapbook app in Air Command is now showing error "no application found to handle this actions".
Please advise.
mojoe said:
The debloat worked fine but the Scrapbook app in Air Command is now showing error "no application found to handle this actions".
Please advise.
Click to expand...
Click to collapse
Removing apps is what a debloating script does. If you want your app back just run the enbloat script. All the instruction you need is provided in the original post.
najoor said:
Removing apps is what a debloating script does. If you want your app back just run the enbloat script. All the instruction you need is provided in the original post.
Click to expand...
Click to collapse
Appreciated. I wanted to debloat but did not expect the scrapbook app to be debloated. Is there any way that I can retrieve this one app, without the rest of the garbage that will return if I "enbloat".
I recall finding the app the last time and renaming from .bak to .apk and it worked.
Can you tell me where to find the apk.
mojoe said:
Appreciated. I wanted to debloat but did not expect the scrapbook app to be debloated. Is there any way that I can retrieve this one app, without the rest of the garbage that will return if I "enbloat".
I recall finding the app the last time and renaming from .bak to .apk and it worked.
Can you tell me where to find the apk.
Click to expand...
Click to collapse
The app is either in /system/app or /system/priv-app. Rename app.apk.bac and app.odex.bac if it exists to app.apk and app.odex and reboot. I don't remember exactly which app is the one you need.
najoor said:
The app is either in /system/app or /system/priv-app. Rename app.apk.bac and app.odex.bac if it exists to app.apk and app.odex and reboot. I don't remember exactly which app is the one you need.
Click to expand...
Click to collapse
Thank you. I will return with the name once I find it.
last night i was using my nexus player and out of nowhere it just randomly decided to shut down. next thing i know upon reboot it tried to update but since im rooted and such it failed. the problem here was that it screwed up boot and i had to wipe the cache which erased most settings.
Is there a way to make the nexus player not try to automatically update? disable update in settings for that matter (in case someone tried to get cute and do it while im not around)?
unvaluablespace said:
last night i was using my nexus player and out of nowhere it just randomly decided to shut down. next thing i know upon reboot it tried to update but since im rooted and such it failed. the problem here was that it screwed up boot and i had to wipe the cache which erased most settings.
Is there a way to make the nexus player not try to automatically update? disable update in settings for that matter (in case someone tried to get cute and do it while im not around)?
Click to expand...
Click to collapse
LOL!!!! I'm going through this frustration right now. Couple things I've done first install a custom recovery it won't let you update. if you do get the endless bootloop clear cache and it will stop (the update is downloaded to the cache). It might do that twice then will pass. This worked for me until factory restored my device. I ended up forgetting and now I'm marshmallow.
Next thing I'm gonna try is pushing a build.prop from the next update to /system. It hasn't been pushed yet but they usually release it on the site with the factory images. If I don't flash aosp first.
Yes but i wonder if theres a way to disable it. it sucks that i have to clear cache every time it attempts to update. its happened 3 times on me now. i will try to install my own custom recovery so hopefully thats all thats needed but i noticed android also downloads the update in the background, which probably wastes more space if your not planning on upgrading.
Once you clear the cache it deletes the update. Almost forgot I read some where here on xda that deleting otacerts.zip will stop it from downloading entirely. Not suggesting you try it but next update I'm gonna
You might want to try the method I suggested at http://forum.xda-developers.com/showpost.php?p=62865084&postcount=6 and see if that works or not.
Thanks for your solution but unfortunately, at least for me, i cant seem to get it to work. i can sideload and launch the disable service app, but when i try going to ANY actual apps or system services, it just crashes. Not sure why. :/
Asadullah said:
Once you clear the cache it deletes the update. Almost forgot I read some where here on xda that deleting otacerts.zip will stop it from downloading entirely. Not suggesting you try it but next update I'm gonna
Click to expand...
Click to collapse
Tried this, and while it did stop the download from verifying, it just caused the nexus player to loop over and over by constantly downloading the update again, only to fail and repeat the process. This worked for a couple of days while i found the proper workaround, so thanks. keep in mind though that because it just caused the device to keep redownloading, this method could cause those on limited data plans to quickly go over.
GabbyWC said:
You might want to try the method I suggested at http://forum.xda-developers.com/showpost.php?p=62865084&postcount=6 and see if that works or not.
Click to expand...
Click to collapse
for whatever reason service disabler did not want to work for me. it caused a constant crash every time i tried clicking on any service within the app. I did however, eventually come across "My Android Tools" by the same developer as service disabler. Using this app i was able to disable the systemupdateservice within both google framework and google play services. I had to use a bluetooth mouse to navigate though, as the remote didnt want to work on its own. Once i used this app and followed your directions, now when i attempt to do a manual system update in settings, it just acts like im on the current version, which i assume means it fails instantly. Thanks so much man! so far so good!
For anyone curious, the app is:
https://play.google.com/store/apps/details?id=cn.wq.myandroidtools&hl=en
keep in mind you may need to connect a mouse somehow to the nexus player to navigate and disable the services.
Thanks I'm gonna downgrade today and find out
unvaluablespace said:
for whatever reason service disabler did not want to work for me. it caused a constant crash every time i tried clicking on any service within the app. I did however, eventually come across "My Android Tools" by the same developer as service disabler. Using this app i was able to disable the systemupdateservice within both google framework and google play services. I had to use a bluetooth mouse to navigate though, as the remote didnt want to work on its own. Once i used this app and followed your directions, now when i attempt to do a manual system update in settings, it just acts like im on the current version, which i assume means it fails instantly. Thanks so much man! so far so good!
Click to expand...
Click to collapse
I'm glad to hear that things worked out for you with this method and the alternate app by the same developer. I've been running Android 6.0 Marshmallow after flashing its factory image but once the monthly security updates and unwanted reboots in to TWRP start happening, I may disable the updates using this method.
How do you sideload either service disabler app? Neither are listed on apkmirror and searching the play store in browser doesn't give an option to install for nexus player.
cpuspeed said:
How do you sideload either service disabler app? Neither are listed on apkmirror and searching the play store in browser doesn't give an option to install for nexus player.
Click to expand...
Click to collapse
Copy and paste the Google Play URL for the app (which was posted earlier in this thread) in to box at the top of https://apkpure.com/region-free-apk-download and press the green download button. Then upload the APK to your Google Drive account and install it through ES File Explorer on your Nexus Player.
please correct me if I'm wrong
As the title said, please correct me if I'm wrong but this method isn't working in the nexus player MRA58K since the apk used to disable the updated only supports Lolipop, I tried in my nexus 7 running 5.0 and it's working flawless but the apk crash on Android 6.0, thanks in advance for your help.
eL_pELoN said:
As the title said, please correct me if I'm wrong but this method isn't working in the nexus player MRA58K since the apk used to disable the updated only supports Lolipop, I tried in my nexus 7 running 5.0 and it's working flawless but the apk crash on Android 6.0, thanks in advance for your help.
Click to expand...
Click to collapse
The "My Android Tools" app does not crash on a Nexus Player with Android 6.0 installed.
GabbyWC said:
The "My Android Tools" app does not crash on a Nexus Player with Android 6.0 installed.
Click to expand...
Click to collapse
Not for me. After granting "my android tools" access, I go to disable systemupdateservice, and popup says it can't access root privelages ( Supersu is up to date. I'm not really sure why I even rooted and installed twrp recovery on this device, but I wish I had stock recovery back so I wouldn't be in this mess.
@pokes135, make sure you have the latest version of My Android Tools installed. You can flash a stock system or recovery image using Nexus Root Toolkit if necessary.
cpuspeed said:
How do you sideload either service disabler app? Neither are listed on apkmirror and searching the play store in browser doesn't give an option to install for nexus player.
Click to expand...
Click to collapse
You can install a firefox browser addon called apk downloader which will inject a button when you view the app in google play website to download the apk.
Use any root explorer or es file explore
make/mount system as rw
navigate to /system/etc/security
rename otacerts.zip into otacerts.zip.bak or whatever you want.
It will stiop the automatic update completely.
If you need ota update you need to rename th otacerts.zip back
Virus in My Android Tools APK?
I'm also trying to disable automatic updating of my rooted nexus player for the same reasons everyone else is but when I try to download the My Android Tools apk I get his virus warning.
a variant of Android/Package.Jiagu.A
hoodred said:
Use any root explorer or es file explore
make/mount system as rw
navigate to /system/etc/security
rename otacerts.zip into otacerts.zip.bak or whatever you want.
It will stiop the automatic update completely.
If you need ota update you need to rename th otacerts.zip back
Click to expand...
Click to collapse
Thanks for the info. Much more straight forward to do then sideloading app while hoping the app won't force close.
adb connect 192.168.xxx.xxx:5555
adb shell
su
mount -o remount,rw /system
mv /system/etc/security/otacerts.zip /system/etc/security/otacerts-disabled.zip
mount -o remount,ro /system
Pr-requisite: must be rooted and ADB Wireless already installed.
Don't use this method (renaming ota_certs)! It will just cause the updates to continuously download and fail, then start downloading again. You'll use a lot of bandwidth this way, and if you have a data cap, this is a sure fire way to bust through it.
Hi all,
Pardon me if I am asking a relatively dumb question.
I have an S7 edge on 6.0.1, G935FD, rooted.
Microsoft Office, basically Word, Excel, Powerpoint, and One Drive, came preinstalled.
I cannot seem to create a new file.
I have two options for the file's file location. Either it saves in the cloud through One Drive or at the local device storage.
If I choose to save to the cloud, I can create a file.
If I change it to local device storage, I get an error which reads: "Office can't create your file right now. Please try again later."
Here are the things I have tried:
Delete cache.
Clear dalvik through TWRP.
Deleted updates and reupdated.
Uninstalled apps through System App Remover.
Reinstalled updates, tried to convert app from system app to user app then uninstalled and reinstalled.
After all that, I still have the same issue.
Any advice?
Try to use system uninstaller, remove those apps, reinstall from the playstore and try again
Also if you have xposed framework try to hide root from those apps
Didn't try any of those as i'm not rooted
EDIT: just rooted my phone (SM-G935FD) using chainfire autoroot and Offices apps are working fine including save, try to unroot then test again if working using chainfire method to root again
Settings -> Applications -> Word -> Permissions
I'm on the Nougat beta so not sure if the order is exactly that but something similar anyway. Check if Storage is enabled. If it isn't, enable it and do the same for the other Office apps.
Thanks. I'll go ahead and try these.
Thanks, I've checked permissions and they are a-ok!
I used the system uninstaller by jumobile and it's leaving a data folder com.microsoft.excel and i cant delete it. I think it leaves it there so in the event that i do a full system restore the apps will get reinstalled.
Update. I was able to get it to work!
Moved it from a system app to a user app, then uninstalled. Rebooted the phone, then downloaded microsoft excel in playstore. Fixed!!
I think it was in the order of how I did the steps with the reboot.