Need help with PIONEER head unit - Android Head-Units

Hey all,
I'm on a long search for someone who could help me , yet I don't have any places left to look so I'm giving it a go here.
It's about a PIONEER AVIC F980 DAB(European) radio, I'd like to modify the firmware and/or create custom ROMS for it. I've searched all of AVIC411.com and used up all of my GoogleFu energie without any result ...
The forum at AVIC411 is pretty dead and my questions there remain unanswerd.
My question now is ; could anyone help me out in some way ?
Even if it's just pointing me in the right direction ( maybe there's an alternate name in the US for the same radio ; wich i've tried to find but no luck.) Or maybe someone could point me in the right direction in how to adjust the original firmware thats found on pioneer's website.
so here are the specs once more :
Radio : PIONEER AVIC F980 DAB (EU [software version 1.08 (2018 version) ])
Car itself : Hyundai I30 1.4 - 2015
PS : Development mode has been enabled on the radio and I should be able to get an ADB shell trough USB or ETHERNET.
I know it's a long shot, but maybe someone has knowledge about anything mentioned here;
Thanks in advance !
Lex

Related

KR-6206 Kaier

Hello Guys
I need some help in flashing my device. I was going to try and flash my head unit today and tried a few things and now i cant even run the restore factory defaults. Well it runs and runs and runs and tells me not to restart the head unit but nothing happens so i switch off and on and its still good. In short i broke it.
The unit switches on and loads up fine but the wifi is all messed up i have to specify ip address to get anything to work.
My aim here is to flash to kitkat if not possible then back to factory. I managed to find this web site with firmware for my radio apparently. I cant find any instructions on how to do the update or do any kind of serial number matching or any kind of identification to avoid flashing wrong. I cannot post the link If you google kr-6206 Firmware its the first link and its by a website firmware-portal. I have registered to there site but cant find any kind of help or contact us. Even tho they say to contact them.
Radio details :
Android 4.2.2
MCU: 4.3.8-11-10-450101 WV(4.3.8, RDS, AD, BC6, Rohm37XXX, TEF662X)
System Version: 2.7.39
1.5GHZ Dual Core Cortex: A9
Ram 1GB DD3
8GB
Car DVD
GPS
TFT LCD 800*480 Screen
For SUBARU FORESTER Impreza 08-10
Bought on ebay in 2014
I realize this question must have been asked but not for this radio. If there is a good guide someone can recommend and also if someone can tell me if i can use the files i downloaded to try restore my radio to a proper working radio. Its really frustrating. I dont wanna brick the radio
Thank you for any help in advance
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
Thank you so much the king root managed to root my device. The only thing is none of those radios look just like mine. One very similar but not 100%.
The supplier from eBay sent me the software files but it dose not update android. Still stuck on 4.2.2. Im afraid to update. I need to figure out how to make a backup first before trying.
All and all the radio works now but no audio from the on board amp im guessing the power IC is fried.
Will keep you guys posted and thank you for the help
D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
So the Agent sent me this. V2.9.5_20150513_800X480_SYSTEM_KED.rar. Its only 174.91M and contains 2 files. It did not update Android to higher version just the system version should i use the Version (2.9.1 800x480 - Most likely default software taken from AN-21U
@mxv68 - V2.9.1_20141217_800X480_SYSTEM_KED.rar) From the XDA forum will that work. Sorry to be so noob at this. First android device .
They have really not made this uncomplicated.
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
D3LTA said:
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
Click to expand...
Click to collapse
Thank you
I will only be able to check this out in a weeks time. I am going to be away. Will let you know as soon as im able to test.

How to Recognize my WinCE Car Radio Model/Processor/WinCE Version.

Hi.
I'm new on this area of the WinCE head units. I just got one on my car and I want to try to recognize which model it is, board and which WinCE version does it has.
Here I found the online manual.
I will appreciate if someone can help me with some tutorial on what are the most common procedures to try to know more about the radio.
Regards
Hi.
I find a way on tricking the radio to run the RESInfo tool by rennaming it to the GPS/MAPS software.
I wrote about it here:
https://forum.xda-developers.com/wi...et_more_information_of_the_car_radio_hardware
I'm looking for more information on how to load the Windows CE desktop on my radio model and see if I can change the skins, update WinCE 6, or connect it to the Wifi.
Regards

Seicane Android 10.0 - cutom roms and root possible?

Hi guys, im sorry if im asking in the wrong place but I dis not know where to start but any help is welcome.
I have just recently purchased a Seicane android 10.0 2gb ram 32g rom head unit for my 2012 Hyundai Elantra from Aliexpress.
I have not yet received my headunit however was wanting to know if there was a custom rom option available for the android 10? I see that there are many options available for previous android versions however I am yet to see any info re android 10 and custom roms/rooting options for it.
If anyone is able to point me in the right direction it would be a great help. Not sure if i can post links to the actual product but can provide a link via message if necessary
What is your head unit, details needed, is it an MTCD?
marchnz said:
What is your head unit, details needed, is it an MTCD?
Click to expand...
Click to collapse
Thanks for the reply, I am not entirely sure if it is an MTCB unit. Please have a look at the attached specs screenshot and let me know if it looks like the unit you are referring to?
isameking12 said:
Thanks for the reply, I am not entirely sure if it is an MTCB unit. Please have a look at the attached specs screenshot and let me know if it looks like the unit you are referring to?
Click to expand...
Click to collapse
Unable to ID, suggest staring with wiki in my sig.
marchnz said:
Unable to ID, suggest staring with wiki in my sig.
Click to expand...
Click to collapse
Thank you for taking the time to reply. Perhaps I will need to wait to get my hands on the unit to see if I can get some further info. For now I will do as you suggested and read through that wiki!
If anyone else has any idea or can point me in the right area, please do so
marchnz said:
Unable to ID, suggest staring with wiki in my sig.
Click to expand...
Click to collapse
Hi there myseicane h6032n android 10 has today been received and I have gone into the settings and this is about the only info i can find relating to the software/hardware info of this device. Are you able to identify the unit and root custom rom possibility?
isameking12 said:
Hi there myseicane h6032n android 10 has today been received and I have gone into the settings and this is about the only info i can find relating to the software/hardware info of this device. Are you able to identify the unit and root custom rom possibility?
Click to expand...
Click to collapse
I am not familiar as is not an MTCD device.
I'd suggest starting with the wiki and searching the forums, search for k2001
marchnz said:
I am not familiar as is not an MTCD device.
I'd suggest starting with the wiki and searching the forums, search for k2001
Click to expand...
Click to collapse
Thank you for your reply mate. I have just download cpuz and have taken some photos of the device and os info. Does this help you in anyway pointing me in the right direction or identifying if root or custom rom possible? Kind regards
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
Hi Montgomery, what did that updated firmware does that the old one doesn't? I got one 9" seicane unit and I would love to know a way that could enable the bluetooth settings so I could tinker with it and connect other gadgets.
Model&Hardware: NWD_K2101(T3)
QUAD-CORE T3 P1
PlatformVER: K20Q-2020/04/01[15:06:16]-V0.01
junilson said:
Hi Montgomery, what did that updated firmware does that the old one doesn't? I got one 9" seicane unit and I would love to know a way that could enable the bluetooth settings so I could tinker with it and connect other gadgets.
Model&Hardware: NWD_K2101(T3)
QUAD-CORE T3 P1
PlatformVER: K20Q-2020/04/01[15:06:16]-V0.01
Click to expand...
Click to collapse
I'm not sure what you are asking. You can open the Bluetooth settings if that's what you want to know.
C75 said:
I'm not sure what you are asking. You can open the Bluetooth settings if that's what you want to know.
Click to expand...
Click to collapse
The thing is, I can connect my phone to the radio unit, but I can't search for Bluetooth devices because there isn't a option for Bluetooth for it in the Android Menu.
Also the car unit doesn't run anything at background, except Maps or music app (only if it's playing something)
2/32g unit?
Thank you for the update. Question please... What do you mean by 2 unit? I have an Allwinner T3p1 k2001 Quadcore 1024x600 screen A23 Android 10 and wondering if I could use your update in case I brick mine while trying to root... Do you know if your update would be compatible with a quad core? Trying hard to find a way to root but cant find my device in twrp and super bummed no one has guided isoking with his rooting desires since I have the exact same model and MCU to the T. I appreciate any guidance you could give. Not sure which Magisk img or twrp would be ok to use for my device, all usb drivers I've tried do not work, and really want root access with Google install capability. Thank you!
These are Allwinner based on the Sunliq platform..Allwinner has locked USB debugging on these units, and there is a formal petition against them for that, they dont play clean with GPL..
Since there is no operational USB debugging, it cannot be rooted or custom recoveried for now..
Hello All.
I apologise if this is not the right place to ask this question..
I have a seicane head unit on my
2003 SL55 AMG [see link]
Can someone guide me to installing a new rom and if not, can I get android auto on this head unit..
I live in Canada and am very frustrated with the Chinese version of the android software
Link..
2001-2004 Mercedes-Benz R230 SL350 SL500 Aftermarket Radio
This android radio head unit fits to 2001 2002 2003 2004 Mercedes-Benz SL R230 SL350 SL500 SL55 SL600 SL65, supports GPS navigation, Carplay, AHD camera.
www.seicane.com
Thank you for any help
Sydsimm

AC8227L Roms - Chinese headunit stereo

Hi all,
I have seen a few Roms here and there for AC8227L but I have a few questions, hope someone can guide me.
Is there a guide to backup the device completely before upgrading so that you can go back to the original rom incase of any issues?
Are there any roms that allow bluetooth pin/code input? I'm unable to connect to elm327 obd2 bt scanner cause I'm unable to enter a password. The obd2 scanner works on my phone, not on the headunit.
Are there any roms that are smoother/quicker? The fake 8.1 is really really slow.
Also any detailed guides for installing the roms? I couldn't find one or maybe I'm just too anxious to use one that isn't specifically made for this device.
Any tips and tricks to get the best out of the headunit? I have used HU reloaded and android auto works decently as long as you keep the resolution low. Youtube is really slow.
Can I install different apps for handling Bluetooth connections and/or Bluetooth music?
Hope someone can help. I've attached screenshots of my device so that I can get relevant information.
I have no issues flashing roms on my phones but I feel really anxious/uncomfortable flashing a rom on this, probably cause of a lack of information on what works and what doesn't.
Android version: 8.1.0
Memory: 1G
Storage: 16G
System platform: AC8227L
Can info: CVD1810_WJ
Build number: ZXDZ_2019.12.30.16
Mcu version : CVD1800-W_19.12.03_014
TP info: 1085x600
Click to expand...
Click to collapse
Bump

Android 10 ac8257 firmware Update

Hallo. Got a question, can someone help me find a firmware for this unit?
I have ben searched in many sites but cant find a firmware for this radio.
the problem ist i got only one Theme to choose and its very crappy.
Thanks!
maybe any idea how can i add UI´s for this unit ?
Hey, i think i can help you with firmware, do you still need it?
Hi can you help me with this radio. gives everything in attachments. I would like to update them, it's getting worse and worse.
the radio loses its sound when i put it in reverse it comes back on. there is no communication with canbus

Categories

Resources