Database Users

Replacing Rom manager with CWM

I'm trying to replace ROM manager with Tenfars via fastboot and it keeps saying error: cannot load d:recovery-en-goapk.img
Any idea what I might be doing wrong? I deleted the system/recovery-sh and am in fastboot now. Thanks for any help.

Phoneguy589 said:
I'm trying to replace ROM manager with Tenfars via fastboot and it keeps saying error: cannot load d:recovery-en-goapk.img
Any idea what I might be doing wrong? I deleted the system/recovery-sh and am in fastboot now. Thanks for any help.
Click to expand...
Click to collapse
where did you save the recovery img?

Phoneguy589 said:
I'm trying to replace ROM manager with Tenfars via fastboot and it keeps saying error: cannot load d:recovery-en-goapk.img
Any idea what I might be doing wrong? I deleted the system/recovery-sh and am in fastboot now. Thanks for any help.
Click to expand...
Click to collapse
Looks like you need to use full path to .img file.

i was getting this error this morning when i went to do this as well
what i did was:
put the 3 files required to utilize fastboot through command prompt (the 2 adb files, and fastboot itself) and the recovery image WITHOUT RENAMING IT into a folder simply called fastboot in C:\
in command prompt i did:
Code:
> cd C:\fastboot
> fastboot devices (to verify my phone was being seen)
> fastboot flash recovery C:\fastboot\recovery-en-goapk-1029.img (or whatever the hell it's called)
and it worked. for some odd reason, it wouldn't go when i renamed the file, or didn't type the EXACT file path to the recovery image..
maybe this will help you?

I have the img file in c:\ Just for the heck of it I also renamed one recovery and placed in c:\atrix. No matter what directory I choose it still says can't load.
c:\fastboot> fastboot flash recovery c:\recovery-en-goapg.img
That looks right to me but not sure what's up.

jakew02 said:
i was getting this error this morning when i went to do this as well
what i did was:
put the 3 files required to utilize fastboot through command prompt (the 2 adb files, and fastboot itself) and the recovery image WITHOUT RENAMING IT into a folder simply called fastboot in C:\
in command prompt i did:
Code:
> cd C:\fastboot
> fastboot devices (to verify my phone was being seen)
> fastboot flash recovery C:\fastboot\recovery-en-goapk-1029.img (or whatever the hell it's called)
and it worked. for some odd reason, it wouldn't go when i renamed the file, or didn't type the EXACT file path to the recovery image..
maybe this will help you?
Click to expand...
Click to collapse
That's what I needed... Thank You! Still learning my way around.

did it work?

Yes it worked. I needed to type in the full line, not just what was told to type in at the beggining of the thread. It's definately a learning thing. I'm trying to decide what ROM I'd like to run now.... I have the 4-5 beta, tried Cherryblur.5 and didn't like it so I went back. Now I have the blur theme but it still seems a little glitchy and the battery issue is annoying. I read that the ROM manager didn't wipe and install properly plus the issue with it not seeing the ext sd card is a problem.

[Q] Nexus 7 2012 -- Recovery won't flash - Please help!

Good morning,
I followed the tutorial here on XDA on how to basically factory reset my Nexus 7. Unfortunately, while going through all the steps I also deleted my recovery. Now I am unable to flash any recovery back on my device. I have tried flashing Clockwork, TWRP and even Google Stock recovery, but it won't work. Neither flashing via Nexus 7 toolkit nor by hand was successful, instead it always returns the following error message:
Booting into Android using an Insecure Boot Image..
cannot load "root\boot-insecure-.img' : No error
Now my Nexus 7 is in some random state, since Android 4.2.2 is installed, but rooting via the Toolkit returns the same message when it comes to the point of flashing a recovery. Then it simply skips the remaining steps and does not install the superuser app. I also downloaded and tried using the ROM Manager, but since root-access is missing, it can't do anything either.
Do you guys have any solution to this?
Help is very much appreciated!
Thanks!

marcfeld said:
Good morning,
I followed the tutorial here on XDA on how to basically factory reset my Nexus 7. Unfortunately, while going through all the steps I also deleted my recovery. Now I am unable to flash any recovery back on my device. I have tried flashing Clockwork, TWRP and even Google Stock recovery, but it won't work. Neither flashing via Nexus 7 toolkit nor by hand was successful, instead it always returns the following error message:
Booting into Android using an Insecure Boot Image..
cannot load "root\boot-insecure-.img' : No error
Now my Nexus 7 is in some random state, since Android 4.2.2 is installed, but rooting via the Toolkit returns the same message when it comes to the point of flashing a recovery. Then it simply skips the remaining steps and does not install the superuser app. I also downloaded and tried using the ROM Manager, but since root-access is missing, it can't do anything either.
Do you guys have any solution to this?
Help is very much appreciated!
Thanks!
Click to expand...
Click to collapse
Though toolkits save a lot of time, I always prefer to do stuff the manual way and I suggest you do the same. To flash the recovery do the following steps
1) a) if you are running Windows open cmd as administrator and CD into a folder containing adb and fastboot .exes
b) copy paste a downloaded recovery image in the same folder and rename it to recovery.img for simplicity.
2) boot into boot loader by pressing power volume down and volume up all together after the device is turned off
3) in bootloader enter the fastboot mode and in cmd on PC type
Code:
fastboot devices
At this moment your device should turn up in the command prompt.if it doesn't then try installing the Asus drivers and repeat the steps above carefully.
4) once all that is over type
Code:
fastboot flash recovery recovery.img
And then the recovery must be flashed . you will get an output on cmd with the time taken to flash it too .
Then reboot into recovery and enjoy.

A succinct summary, Red Devil.
I always maintain, on a my Windows laptop, a folder called FastBootAdb, that contains the following files...
fastboot.exe
adb.exe
AdbWinApi.dll (needed by Windows)
AdbWinUsbApi.dll (needed by Windows)
If I wish to flash a new recovery.img (or a new boot.img - useful for certain kernels, that consists of nothing but a boot.img, like franco for example. Most custom kernels though, consist of more than just a boot.img, and need to flashed via TWRP or CWM, and can't just be fastboot flashed).
Anyway... I just copy the new recovery into this folder, rename it to recovery.img and run the fastboot command accordingly...
Code:
fastboot flash recovery recovery.img
...similarly with the boot partition...
Code:
fastboot flash boot boot.img
To be honest, I'm puzzled why people feel the need to overcomplicate this very simple procedure with toolkits.
Rgrds,
Ged.

Thanks a million guys!
I will try this as soon as I get home tonight and let you know.

nourtsW escape
This did the trick!
Thanks again guys!

marcfeld said:
This did the trick!
Thanks again guys!
Click to expand...
Click to collapse
Glad you got it sorted.
With Android, there's always 'more than one way to skin a cat!'.
Rgrds,
Ged.

GedBlake said:
Glad you got it sorted.
With Android, there's always 'more than one way to skin a cat!'.
Rgrds,
Ged.
Click to expand...
Click to collapse
I am so relieved, because I thought I had bricked it...

GedBlake said:
A succinct summary, Red Devil.
I always maintain, on a my Windows laptop, a folder called FastBootAdb, that contains the following files...
fastboot.exe
adb.exe
AdbWinApi.dll (needed by Windows)
AdbWinUsbApi.dll (needed by Windows)
If I wish to flash a new recovery.img (or a new boot.img - useful for certain kernels, that consists of nothing but a boot.img, like franco for example. Most custom kernels though, consist of more than just a boot.img, and need to flashed via TWRP or CWM, and can't just be fastboot flashed).
Anyway... I just copy the new recovery into this folder, rename it to recovery.img and run the fastboot command accordingly...
Code:
fastboot flash recovery recovery.img
...similarly with the boot partition...
Code:
fastboot flash boot boot.img
To be honest, I'm puzzled why people feel the need to overcomplicate this very simple procedure with toolkits.
Rgrds,
Ged.
Click to expand...
Click to collapse
ive done this exactly step by step and i getthe system cannot find the specified path i made a folder inside the windows folder i named it recovery in the command prompt i did cd windows then cd recovery then i typed fastboot devicesthen it said that

Help! Nexus 7 won't accept recovery flash image
I've tried all the above. I can get to the command prompt, and fastboot devices sees my device. I input the above commands to reflash, it starts with message "sending 'recovery' <xxx.xkb>' then nothing. It just sits there until I reset or reboot my nexus 7. Can anyone help?

I softbricked my LS980 and cannot escape fastboot. Assistance Requested.

Had a problem with audio playback (volume always high no matter what). Decide to flash. PAC for my Sprint LS980. I see this:
Seems to be a lot of confusion so I'll clear things up..
ZV7->ZV8->ZVA is how the ota history goes, with ZVB on the way.
If you're on stock ZVA, your aboot (bootloader) may not be downgraded, in that case, use FreeGee from Play Store to install a recovery, it will automatically downgrade your aboot.
if you have the ZVA Radio, just flash furnace or dr87's kernel after you flash an AOSP ROM, all done.
Click to expand...
Click to collapse
Sorce: http://forum.xda-developers.com/showthread.php?t=2669074
Seeing the last sentance, I think that if I flash ZVA Radio, SlimKat ROM (the one that causes me problems) and then dr87's kernel I could try a ZVA experience. I flashed SlimKat again becuase I was going to change anyway, I wanted to try it with ZVA.
Tell myself why not, I do it.
Fails but I didnt pay much attention. I reboot.
Stuck in fastboot mode and cant escape. Recovery is a no-go.
Tried flashing both ZV7aboot.img and twrp2.6.3.0.img into their appropriate partitions (boot and recovery).
Still having problems, but now I cant do any button combination (except DownloadMode. Cant turn off) after ZV7aboot.img flash.
I dont want to erase my memory (~26GB of valuable data). Is there a way to flash a ZV8Radio.zip from fastboot? I think thats my problem, but Im not too sure. Just access to recovery would allow my to fix my problems.
Thanks anyone for any help! I think I really screwed myself over this time. Thanks everyone!
Edit: Anyone know where to get a boot.img and system.img for the Sprint LS980?

zv7_aboot.img isn't a boot.img, it's the bootloader. Use FreeGee to install twrp, it will handle the aboot for you. Then you can take advantage of the last sentence.

Savoca said:
zv7_aboot.img isn't a boot.img, it's the bootloader. Use FreeGee to install twrp, it will handle the aboot for you. Then you can take advantage of the last sentence.
Click to expand...
Click to collapse
I am stuck in fastboot. No recovery. Download mode is also accessable.
Which of the following would help:
* System.img and Boot.img (where to find em?)
* A kernel .img (Do they exist?)
* Flashing the ZV7 or 8 aboot.img oncemore with twrp.img again?
Thanks for coming to help! It means a lot.

RevolcFael4 said:
I am stuck in fastboot. No recovery. Download mode is also accessable.
Which of the following would help:
* System.img and Boot.img (where to find em?)
* A kernel .img (Do they exist?)
* Flashing the ZV7 or 8 aboot.img oncemore with twrp.img again?
Thanks for coming to help! It means a lot.
Click to expand...
Click to collapse
If you can boot into a rom, use FreeGee to install twrp. If you can't boot into rom and recovery, you need to flashtool.

Savoca said:
If you can boot into a rom, use FreeGee to install twrp. If you can't boot into rom and recovery, you need to flashtool.
Click to expand...
Click to collapse
Flashtools is asking for login and password. ?
Does this mean I have to wipe all user data in order to use it?
Edit: Do you know where System.img and Boot.img could be downloaded? I think its my only hope.

RevolcFael4 said:
Flashtools is asking for login and password. ?
Does this mean I have to wipe all user data in order to use it?
Edit: Do you know where System.img and Boot.img could be downloaded? I think its my only hope.
Click to expand...
Click to collapse
You didn't read the tutorial.
http://downloads.codefi.re/autoprime/LG/LG_G2

Savoca said:
You didn't read the tutorial.
http://downloads.codefi.re/autoprime/LG/LG_G2
Click to expand...
Click to collapse
Thanks for the link! That was extremely helpful.
What I did to gain access to twrp again was:
Download boot.img from the link.
Download aboot.img from link.
Download twrp.img (but this isnt necessary, file is already available on phone. No need.)
* Enter command 'fastboot flash boot boot.img'
* (If you hold power it starts showing LG Logo.)
* Go back to Fastboot. Enter command 'fastboot flash aboot aboot.img'
* Now TWRP access is regained! Phone doesnt boot normally, must flash ROM and stuff again.
Thanks a lot! This was an okay first fastboot experience.

Soft Bricked Sprint LS980?
Hello, I'm having a similar problem. I haven't had a phone for a couple years since tinkering with my Evo and thought I still knew what I was doing with my new G2. That proved to be incorrect.
I had it semi rooted. (I followed the instructions using Ioroot and Kingo) I wasn't able to change APN and use GSM for Metro PCS
After reading up about the spark patch I followed a tutorial (not very well obviously) and managed to get the phone will it will no longer boot.
I can get it into bootloader, and a frozen in download mode. otherwise it just hangs at the LG logo.
Is there a way to recover from bootloader?
I copied twrp-2.6.3.2-g2spr.img and zv7-aboot.img to the phone and did the following.
Here are the commands I used with the guide. I looks like I was using 2 different guides at once..... :/
Originally Posted by darkpoe View Post
This phone does not use Mass storage mode, it uses MTP, you will see it as a phone inside windows explorer and when you click into it you will see "internal storage" this internal storage is what I am referring to as the root of the sdcard (as they are as well)
Also, dont blame me if your phone dies, all this stuff will void your warranty of your phone and your toaster!
Hit the build number under about phone --> software until developer mode is enabled
goto developer mode turn on mtp mode
go download twrp from there site http://www.teamw.in/project/twrp2/197
I used kingo but cant link on xda ,, google it .. its on cnet as well
get http://koush.com/post/universal-adb-driver install (works on all windows)
get http://www.xda-developers.com/androi...oot-installer/has good quick adb install it
copy the downloaded openrecovery for sprint onto the phone directly into the "root" folder (root folder being like when you look at yoru C: drive in windows explorer that is the root folder under linux), when you plug into the pc, make sure in mtp mode
with phone still plugged in run kingo and root it
it will reboot
with phone plugged in run "adb usb" from command prompt on pc (from the link for adb that it installed, it will open a command prompt for you in the proper folder when you click it)
approve adb connection on phone
then run "adb shell" from command prompt on pc
type su, approve it on phone
paste this next line exactly at the prompt
********** this is the line I used from a different guide ***** dd if=/sdcard/zv7-aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/openrecovery-twrp-2.6.3.2-g2spr.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
let it flash
it will say bytes copied and you will be good
type reboot inside the shell
the phone will reboot
I use goo manager from play store to boot into recovery, I dont even know the key combo for it yet.
Any help would be appreciated, thank you.
---------- Post added at 02:59 AM ---------- Previous post was at 02:06 AM ----------
x_lord said:
Hello, I'm having a similar problem. I haven't had a phone for a couple years since tinkering with my Evo and thought I still knew what I was doing with my new G2. That proved to be incorrect.
I had it semi rooted. (I followed the instructions using Ioroot and Kingo) I wasn't able to change APN and use GSM for Metro PCS
After reading up about the spark patch I followed a tutorial (not very well obviously) and managed to get the phone will it will no longer boot.
I can get it into bootloader, and a frozen in download mode. otherwise it just hangs at the LG logo.
Is there a way to recover from bootloader?
I copied twrp-2.6.3.2-g2spr.img and zv7-aboot.img to the phone and did the following.
Here are the commands I used with the guide. I looks like I was using 2 different guides at once..... :/
Originally Posted by darkpoe View Post
This phone does not use Mass storage mode, it uses MTP, you will see it as a phone inside windows explorer and when you click into it you will see "internal storage" this internal storage is what I am referring to as the root of the sdcard (as they are as well)
Also, dont blame me if your phone dies, all this stuff will void your warranty of your phone and your toaster!
Hit the build number under about phone --> software until developer mode is enabled
goto developer mode turn on mtp mode
go download twrp from there site http://www.teamw.in/project/twrp2/197
I used kingo but cant link on xda ,, google it .. its on cnet as well
get http://koush.com/post/universal-adb-driver install (works on all windows)
get http://www.xda-developers.com/androi...oot-installer/has good quick adb install it
copy the downloaded openrecovery for sprint onto the phone directly into the "root" folder (root folder being like when you look at yoru C: drive in windows explorer that is the root folder under linux), when you plug into the pc, make sure in mtp mode
with phone still plugged in run kingo and root it
it will reboot
with phone plugged in run "adb usb" from command prompt on pc (from the link for adb that it installed, it will open a command prompt for you in the proper folder when you click it)
approve adb connection on phone
then run "adb shell" from command prompt on pc
type su, approve it on phone
paste this next line exactly at the prompt
********** this is the line I used from a different guide ***** dd if=/sdcard/zv7-aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/openrecovery-twrp-2.6.3.2-g2spr.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
let it flash
it will say bytes copied and you will be good
type reboot inside the shell
the phone will reboot
I use goo manager from play store to boot into recovery, I dont even know the key combo for it yet.
Any help would be appreciated, thank you.
Click to expand...
Click to collapse
Found this: Worked like a charm.
–]rdsqc22 2 points 23 days ago
Alright, sorry to comment on something 3 months old, but I just had this problem and managed to solve it.
When in the mode described above, you are still able to use Fastboot. Get a linux computer and install fastboot.
Then, go here: http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions
Download the images for laf, aboot, boot, and recovery.
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot 6-boot.img
fastboot flash aboot 4-aboot.img
fastboot flash recovery 10-recovery.img
fastboot flash laf 11-laf.img
fastboot reboot
This fixed the problem for me. Good luck!

x_lord said:
Found this: Worked like a charm.
–]rdsqc22 2 points 23 days ago
Alright, sorry to comment on something 3 months old, but I just had this problem and managed to solve it.
When in the mode described above, you are still able to use Fastboot. Get a linux computer and install fastboot.
Then, go here: http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions
Download the images for laf, aboot, boot, and recovery.
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot 6-boot.img
fastboot flash aboot 4-aboot.img
fastboot flash recovery 10-recovery.img
fastboot flash laf 11-laf.img
fastboot reboot
This fixed the problem for me. Good luck!
Click to expand...
Click to collapse
Sorry for not replying, but I see you managed to fix your problem. All you needed to do was download .img files, then enter commands through fastboot. Although it is slightly more complicated than that, its the rough outline of what needs to be done to fix it. Nice work fixing your problem. I came back to this thread to remind myself of the commands that need to be entered (My comments help myself).
I think I am just going to copy-paste the quoted box above if anyone needs instructions how to do this. Thanks for the quick guide I can use to help others!

bricked , simple fix?
x_lord said:
Hello, I'm having a similar problem. I haven't had a phone for a couple years since tinkering with my Evo and thought I still knew what I was doing with my new G2. That proved to be incorrect.
I had it semi rooted. (I followed the instructions using Ioroot and Kingo) I wasn't able to change APN and use GSM for Metro PCS
After reading up about the spark patch I followed a tutorial (not very well obviously) and managed to get the phone will it will no longer boot.
I can get it into bootloader, and a frozen in download mode. otherwise it just hangs at the LG logo.
Is there a way to recover from bootloader?
I copied twrp-2.6.3.2-g2spr.img and zv7-aboot.img to the phone and did the following.
Here are the commands I used with the guide. I looks like I was using 2 different guides at once..... :/
Originally Posted by darkpoe View Post
This phone does not use Mass storage mode, it uses MTP, you will see it as a phone inside windows explorer and when you click into it you will see "internal storage" this internal storage is what I am referring to as the root of the sdcard (as they are as well)
Also, dont blame me if your phone dies, all this stuff will void your warranty of your phone and your toaster!
Hit the build number under about phone --> software until developer mode is enabled
goto developer mode turn on mtp mode
go download twrp from there site http://www.teamw.in/project/twrp2/197
I used kingo but cant link on xda ,, google it .. its on cnet as well
get http://koush.com/post/universal-adb-driver install (works on all windows)
get http://www.xda-developers.com/androi...oot-installer/has good quick adb install it
copy the downloaded openrecovery for sprint onto the phone directly into the "root" folder (root folder being like when you look at yoru C: drive in windows explorer that is the root folder under linux), when you plug into the pc, make sure in mtp mode
with phone still plugged in run kingo and root it
it will reboot
with phone plugged in run "adb usb" from command prompt on pc (from the link for adb that it installed, it will open a command prompt for you in the proper folder when you click it)
approve adb connection on phone
then run "adb shell" from command prompt on pc
type su, approve it on phone
paste this next line exactly at the prompt
********** this is the line I used from a different guide ***** dd if=/sdcard/zv7-aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/openrecovery-twrp-2.6.3.2-g2spr.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
let it flash
it will say bytes copied and you will be good
type reboot inside the shell
the phone will reboot
I use goo manager from play store to boot into recovery, I dont even know the key combo for it yet.
Any help would be appreciated, thank you.
---------- Post added at 02:59 AM ---------- Previous post was at 02:06 AM ----------
Found this: Worked like a charm.
–]rdsqc22 2 points 23 days ago
Alright, sorry to comment on something 3 months old, but I just had this problem and managed to solve it.
When in the mode described above, you are still able to use Fastboot. Get a linux computer and install fastboot.
Then, go here: http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions
Download the images for laf, aboot, boot, and recovery.
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot 6-boot.img
fastboot flash aboot 4-aboot.img
fastboot flash recovery 10-recovery.img
fastboot flash laf 11-laf.img
fastboot reboot
This fixed the problem for me. Good luck!
Click to expand...
Click to collapse
this process (which i got from a different thread originally)
bricked my phone Lg G2 (Ls 980 sprint 32 gb)
i was on remote connection with my friend attempting all kinds of flashes (mostly custom roms and recoveries)
what he did
he FIRST flashboot erase aboot
and then erased all the other files
foolishly he then used fastboot reboot BEFORE reflashing the necessary images
this leaves me with a device that is practically 100% empty all hardware no software
i have no response no life not even a backlight EXCEPT
i can plug into windows and see Qdloader9008 is connected comport 3
and i can communicate with the device on ubuntu terminal although im not too farmiliar with terminal syntax so im not having much luck
im convinced it is as simple as reflashing at least a working recovery or download mode from which i can install everything else i nee
between QPST, Terminal, and or some other method
sorry for Noob ish ness
any help would be appreciated even if just help with a better understanding of what to do next
payment is possible

True2This said:
this process (which i got from a different thread originally)
bricked my phone Lg G2 (Ls 980 sprint 32 gb)
i was on remote connection with my friend attempting all kinds of flashes (mostly custom roms and recoveries)
what he did
he FIRST flashboot erase aboot
and then erased all the other files
foolishly he then used fastboot reboot BEFORE reflashing the necessary images
this leaves me with a device that is practically 100% empty all hardware no software
i have no response no life not even a backlight EXCEPT
i can plug into windows and see Qdloader9008 is connected comport 3
and i can communicate with the device on ubuntu terminal although im not too farmiliar with terminal syntax so im not having much luck
im convinced it is as simple as reflashing at least a working recovery or download mode from which i can install everything else i nee
between QPST, Terminal, and or some other method
sorry for Noob ish ness
any help would be appreciated even if just help with a better understanding of what to do next
payment is possible
Click to expand...
Click to collapse
Sorry, I barely understood what to do originally. What you have to do next is to reflash the aboot/boot/ whatever partitions but getting to that position might be difficult. Maybe some sort of command would allow you to connect to it oncemore?
Sorry, try to look into it more and see if a dev could help. Try posting something in /r/lgg2 but then again I cant be certain anything would happen. Good luck!

Easy guide
Since the problem keeps happening to people heres a quick tutorial I made.
Download and install this (PC only?)
Now go here. (D802) (D800) (LS980) (VS980) (D803) (Device tree/others)Download the images for laf, aboot, boot, and recovery.
Place the 4 .img files in the same folder. Control right click in that folded and open terminal. If this isn't how you open terminal in a folder search"how to open terminal in a folder".
(NOTE: Commands below will differ from the file names. Change the values in the parenthesis to match the files, HOWEVER, do not type the parenthesis into the terminal prompt! It will not work if you do.)
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot (6-boot.img)
fastboot flash aboot (4-aboot.img)
fastboot flash recovery (10-recovery.img)
fastboot flash laf (11-laf.img)
fastboot reboot
You should be fine now!

Unbrick Ls980 formatting partitions
Do this: (only for LS980)
1. Download the adb.zip file
2. Unzip in you computer the adb.zip file
3. Connect your phone LS980 to your computer
4. Run "particiones lg g2.bat"
5. Enter in download mode and flash the phone
6. enjoy your phone
Link of download
https://drive.google.com/file/d/0B6VmAym2TGdIRGJmSXFqdm84NU0/view?usp=sharing

RevolcFael4 said:
Since the problem keeps happening to people heres a quick tutorial I made.
Download and install this (PC only?)
Now go here. (D802) (D800) (LS980) (VS980) (D803) (Device tree/others)Download the images for laf, aboot, boot, and recovery.
Place the 4 .img files in the same folder. Control right click in that folded and open terminal. If this isn't how you open terminal in a folder search"how to open terminal in a folder".
(NOTE: Commands below will differ from the file names. Change the values in the parenthesis to match the files, HOWEVER, do not type the parenthesis into the terminal prompt! It will not work if you do.)
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot (6-boot.img)
fastboot flash aboot (4-aboot.img)
fastboot flash recovery (10-recovery.img)
fastboot flash laf (11-laf.img)
fastboot reboot
You should be fine now!
Click to expand...
Click to collapse
i tried this with almost all model files but still on fastboot any other option?>

I want to say thank you so much for this thread. Just got a new (refurb) G2 switching carriers to T-Mo and my idiot self used the wrong root program and soft bricked to fastboot. 4 .img files later and a few commands and I don't think I've ever been so happy to see a download screen on a phone...

juancho8207 said:
Do this: (only for LS980)
1. Download the adb.zip file
2. Unzip in you computer the adb.zip file
3. Connect your phone LS980 to your computer
4. Run "particiones lg g2.bat"
5. Enter in download mode and flash the phone
6. enjoy your phone
Link of download
https://drive.google.com/file/d/0B6VmAym2TGdIRGJmSXFqdm84NU0/view?usp=sharing
Click to expand...
Click to collapse
GREAT, You are a life saver :laugh:

juancho8207 said:
Do this: (only for LS980)
1. Download the adb.zip file
2. Unzip in you computer the adb.zip file
3. Connect your phone LS980 to your computer
4. Run "particiones lg g2.bat"
5. Enter in download mode and flash the phone
6. enjoy your phone
Link of download
https://drive.google.com/file/d/0B6VmAym2TGdIRGJmSXFqdm84NU0/view?usp=sharing
Click to expand...
Click to collapse
wow.. worked flawlessly... thank you very much :good::good::laugh::laugh:

ADB drivers

hi guys, my computer ( wins10) donset read adb device.
but i i use fastboot commands its able to list my devices, but ' adb devices' shows none listed? i am suck, might have soft brick it, able to boot into stock recocery. any suggestions?
oneplus 5 phone.

What are you trying to do?

Rhoban said:
What are you trying to do?
Click to expand...
Click to collapse
Was trying to update , but got stuck at boot screen .

Just flash the stock ROM with the stock recovery.

I can’t sideload it, “ adb not working “

Rhoban said:
Just flash the stock ROM with the stock recovery.
Click to expand...
Click to collapse
Files all courupted

With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here

Can you boot? Turn on USB debugging , make sure that you allow the device when booted.
Do an advanced devices when in the OS make sure it's there.
Then you can install a TWRP recovery and do what you need to.

maikvitesse said:
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Click to expand...
Click to collapse
Hi bro, I am unlocked ! I mange to find a win7 pc. I ran both commands “adb devices” and “Fastboot devices”
Both shows me my devices number hence drivers are working fine.
Now do I flash twrp and sidleload? Because I can’t sideload in stock “error: *cant read zip*”. Do advice me!
PS: can boot into OS, no OS in system only recovery . USB debugging was on before boot loop happens! Thanks for all advices !

maikvitesse said:
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Click to expand...
Click to collapse
dladz said:
Can you boot? Turn on USB debugging , make sure that you allow the device when booted.
Do an advanced devices when in the OS make sure it's there.
Then you can install a TWRP recovery and do what you need to.
Click to expand...
Click to collapse
Hi ! USB debugging was turn on before boot loop happened. Can’t boot into OS , only recovery

lolitsryan96 said:
Hi bro, I am unlocked ! I mange to find a win7 pc. I ran both commands “adb devices” and “Fastboot devices”
Both shows me my devices number hence drivers are working fine.
Now do I flash twrp and sidleload? Because I can’t sideload in stock “error: *cant read zip*”. Do advice me!
PS: can boot into OS, no OS in system only recovery . USB debugging was on before boot loop happens! Thanks for all advices !
Click to expand...
Click to collapse
be sure your bootloader is unlocked
turn your phone into fastboot
open command prompt to the folder your twrp is in.
rename the twrp image file to recovery.img
do the following command: fastboot flash recovery recovery.img
after that boot into recovery
press adb sideload
on the computer, open command prompt to the folder where your zip file is in.
rename the rom zip file to rom.zip
do the following command: adb sideload rom.zip
done!

Thanks bro, I shall update you on the situation once I done, at work now.
Do I need to “open command promt “ at my sdk folder/plat-form tools?

maikvitesse said:
be sure your bootloader is unlocked
turn your phone into fastboot
open command prompt to the folder your twrp is in.
rename the twrp image file to recovery.img
do the following command: fastboot flash recovery recovery.img
after that boot into recovery
press adb sideload
on the computer, open command prompt to the folder where your zip file is in.
rename the rom zip file to rom.zip
do the following command: adb sideload rom.zip
done!
Click to expand...
Click to collapse
hi bro, sideload failed i think, i cant find sideload file. when the sideload end. its gave x1.00 something like that.

maikvitesse said:
be sure your bootloader is unlocked
turn your phone into fastboot
open command prompt to the folder your twrp is in.
rename the twrp image file to recovery.img
do the following command: fastboot flash recovery recovery.img
after that boot into recovery
press adb sideload
on the computer, open command prompt to the folder where your zip file is in.
rename the rom zip file to rom.zip
do the following command: adb sideload rom.zip
done!
Click to expand...
Click to collapse
attach image, successfully sideload but phone still in bootloop?

lolitsryan96 said:
attach image, successfully sideload but phone still in bootloop?
Click to expand...
Click to collapse
you need to wipe everything before flashing

maikvitesse said:
you need to wipe everything before flashing
Click to expand...
Click to collapse
just wipe, now re-sideloading. how it works. bloody nightmare dude.

maikvitesse said:
you need to wipe everything before flashing
Click to expand...
Click to collapse
still stuck at the boot loop, any advice

maikvitesse said:
you need to wipe everything before flashing
Click to expand...
Click to collapse
hi brother finally did it!
my oneplus 5 was encrypted totally forgot about hence need to wipe full back to factory stage, learn my lesson the hard way really grateful for your help!
ps; i am going to Holland on may-june for my euro trip! any places of interest in Holland?

lolitsryan96 said:
hi brother finally did it!
my oneplus 5 was encrypted totally forgot about hence need to wipe full back to factory stage, learn my lesson the hard way really grateful for your help!
ps; i am going to Holland on may-june for my euro trip! any places of interest in Holland?
Click to expand...
Click to collapse
nice good to hear!
haha, well tourists like Amsterdam so do visit that and visit The Hague/Scheveningen. I like these 3 places the most I think. Look up TripAdvisor for good attractions once you're there. do visit 'The Amsterdam Dungeon' don't miss that, I liked it very very much!

how to install the drivers?
maikvitesse said:
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Click to expand...
Click to collapse
Cannot adb to the phone in FASTBOOT. adb devices shows nothing when in FASTBOOT, but shows the device when in normal boot.
Hence I cannot upgrade TWRP from 3.2.1-1 to 3.2.3-0. Was trying this so to upgrade from beta23 to the beta 26, now 27 with which 3.2.1-1 seems to have problems.
A 2nd approach, just re-installing beta23 without Magisk18 gives the stock recovery which manages the beta27 install. But then I'm blocked from a Magisk18 install and still cannot use FASTBOOT mode to put TWRP back on.
Thought the adb drives could be old and sought new drivers, even assuming your link is to the most current I don't know how to get my Windows7 to use the zip file. Can you assist? This would let me put the latest TWRP, hence install Magisk18 and be rooted again!

Cant install TWRP-MATA_2 error: cannot load 'C:\ADB\recovery.img': No such file or...

I'm a noob but a respectful one. I'm embarrassed to have to post in this forum asking for help on what should be such a simple problem but I'm three days and 500 google searches closer to insanity.
I just want to install TWRP on my Essential Android which I bought from Best Buy but activated on T-Mobile.:
Product - Mata
Variant - Openus
Bootloader Version - mata-84f7cce
Baseband Version - 2.0.c4.M2.0.3
Secure Boot - yes
Device State - unlocked
I've installed ADB and fastboot on my computer and made it system wide using the PATH variable in Windows 10 Pro System Properties "Environment Variables"
I have all the proper Windows usb drivers from the Essential website and I have activated Developer Options, OEM unlocking and USB Debugging on my phone. I've removed the pin so the device doesn't lock.
I'm using the original USB C cable from Essential plugged directly into my new HP all n one USB C slot.
I've copied the twrp image and pasted it into C:\ADB\ along with my minimum adb\fastboot install. I then opened a powershell there. Both the "adb devices" and "fastboot devices" commands show my phone is being recognized and that I am indeed in FastBoot Mode.
I originally left the twrp image name as downloaded: "twrp-mata_2" but when "fastboot flash recovery C:\ADB\twrp-mata_2" resulted in "error: cannot load 'C:\ADB\recovery.img': No such file or directory"
I renamed it and ran the command:
"fastboot flash recovery C:\ADB\recovery.img"
Same error.
Please help

There is no recovery partition on the device.
To flash TWRP, you'll need to fastboot flash boot, then boot to recovery from fastboot on your device. Once in TWRP, you'll need to flash a boot image before restart. TWRP isn't persistent, so you'll have to do this every time.
Unless you're looking for a custom ROM, the easiest way to root is just to patch a stock boot image with magisk and flash it from fastboot.

MackHoncho said:
I'm a noob but a respectful one. I'm embarrassed to have to post in this forum asking for help on what should be such a simple problem but I'm three days and 500 google searches closer to insanity.
I just want to install TWRP on my Essential Android which I bought from Best Buy but activated on T-Mobile.:
Product - Mata
Variant - Openus
Bootloader Version - mata-84f7cce
Baseband Version - 2.0.c4.M2.0.3
Secure Boot - yes
Device State - unlocked
I've installed ADB and fastboot on my computer and made it system wide using the PATH variable in Windows 10 Pro System Properties "Environment Variables"
I have all the proper Windows usb drivers from the Essential website and I have activated Developer Options, OEM unlocking and USB Debugging on my phone. I've removed the pin so the device doesn't lock.
I'm using the original USB C cable from Essential plugged directly into my new HP all n one USB C slot.
I've copied the twrp image and pasted it into C:\ADB\ along with my minimum adb\fastboot install. I then opened a powershell there. Both the "adb devices" and "fastboot devices" commands show my phone is being recognized and that I am indeed in FastBoot Mode.
I originally left the twrp image name as downloaded: "twrp-mata_2" but when "fastboot flash recovery C:\ADB\twrp-mata_2" resulted in "error: cannot load 'C:\ADB\recovery.img': No such file or directory"
I renamed it and ran the command:
"fastboot flash recovery C:\ADB\recovery.img"
Same error.
Please help
Click to expand...
Click to collapse
You should try using a Type-C to USB cable, I ran into the same issue trying to flash mine using supplied cable, once I tried the USB to Type-C it worked. :good:

MackHoncho said:
I'm a noob but a respectful one. I'm embarrassed to have to post in this forum asking for help on what should be such a simple problem but I'm three days and 500 google searches closer to insanity.
I just want to install TWRP on my Essential Android which I bought from Best Buy but activated on T-Mobile.:
Product - Mata
Variant - Openus
Bootloader Version - mata-84f7cce
Baseband Version - 2.0.c4.M2.0.3
Secure Boot - yes
Device State - unlocked
I've installed ADB and fastboot on my computer and made it system wide using the PATH variable in Windows 10 Pro System Properties "Environment Variables"
I have all the proper Windows usb drivers from the Essential website and I have activated Developer Options, OEM unlocking and USB Debugging on my phone. I've removed the pin so the device doesn't lock.
I'm using the original USB C cable from Essential plugged directly into my new HP all n one USB C slot.
I've copied the twrp image and pasted it into C:\ADB\ along with my minimum adb\fastboot install. I then opened a powershell there. Both the "adb devices" and "fastboot devices" commands show my phone is being recognized and that I am indeed in FastBoot Mode.
I originally left the twrp image name as downloaded: "twrp-mata_2" but when "fastboot flash recovery C:\ADB\twrp-mata_2" resulted in "error: cannot load 'C:\ADB\recovery.img': No such file or directory"
I renamed it and ran the command:
"fastboot flash recovery C:\ADB\recovery.img"
Same error.
Please help
Click to expand...
Click to collapse
@barteringram is right, no recovery partition.
Your command needed is this.
Fastboot flash boot whateveryounamedtwrp.img.

fastboot flash boot_a/boot_b yourTWRP.img
The above command worked for me. Use boot_a or boot_b depending on what you have. In addition use a separate type C cable to your PC instead of stock type C cable and remove all USB accessories plugged in the PC. I know its crazy but working with this phone may require you to do some unexplainable stuff.

MackHoncho said:
I'm a noob but a respectful one. I'm embarrassed to have to post in this forum asking for help on what should be such a simple problem but I'm three days and 500 google searches closer to insanity.
I just want to install TWRP on my Essential Android which I bought from Best Buy but activated on T-Mobile.:
Product - Mata
Variant - Openus
Bootloader Version - mata-84f7cce
Baseband Version - 2.0.c4.M2.0.3
Secure Boot - yes
Device State - unlocked
I've installed ADB and fastboot on my computer and made it system wide using the PATH variable in Windows 10 Pro System Properties "Environment Variables"
I have all the proper Windows usb drivers from the Essential website and I have activated Developer Options, OEM unlocking and USB Debugging on my phone. I've removed the pin so the device doesn't lock.
I'm using the original USB C cable from Essential plugged directly into my new HP all n one USB C slot.
I've copied the twrp image and pasted it into C:\ADB\ along with my minimum adb\fastboot install. I then opened a powershell there. Both the "adb devices" and "fastboot devices" commands show my phone is being recognized and that I am indeed in FastBoot Mode.
I originally left the twrp image name as downloaded: "twrp-mata_2" but when "fastboot flash recovery C:\ADB\twrp-mata_2" resulted in "error: cannot load 'C:\ADB\recovery.img': No such file or directory"
I renamed it and ran the command:
"fastboot flash recovery C:\ADB\recovery.img"
Same error.
Please help
Click to expand...
Click to collapse
Stop the presses!
Please do not use that old ass version of TWRP...
Many many fixes since then...
Please read and familiarize yourself with
http://mata.readthedocs.io/en/latest/
And also realize that you will not ever have persistent TWRP

TWRP-Mata_11.img is what you should be flashing and you have to flash it via fastboot Everytime you want to enter twrp. Then you have to flash a stock boot.img Everytime you reboot the system from twrp.

droidstyle said:
TWRP-Mata_11.img is what you should be flashing and you have to flash it via fastboot Everytime you want to enter twrp. Then you have to flash a stock boot.img Everytime you reboot the system from twrp.
Click to expand...
Click to collapse
I am semi new to this community, so I am unsure if it's doing this because I am rooted or not but I've got twrp permanently installed... So from my understanding Slot a can hold your os and slot b basically hold your twrp you just need to remember when you need to switch back.... How I installed was fast booted twrp to slot a, then in twrc switched to slot b to install rom, then switch back to slot a and did a reboot to recovery... Boots into twrp, I switched back to slot b to flash gapps, then restart system... Once inside os and everything is set up if you are rooting reboot to bootloader and flash the patched boot. Img with fastboot on pc... Then reboot system... Now when you want to use twrp all you have to do is reboot bootloader, fastboot to switch to slot a, and then boot recovery... Then Twrp will load then switch to slot b and you are good to go!

barteringram said:
There is no recovery partition on the device.
To flash TWRP, you'll need to fastboot flash boot, then boot to recovery from fastboot on your device. Once in TWRP, you'll need to flash a boot image before restart. TWRP isn't persistent, so you'll have to do this every time.
Unless you're looking for a custom ROM, the easiest way to root is just to patch a stock boot image with magisk and flash it from fastboot.
Click to expand...
Click to collapse
Thank you in advance for answering about three questions as of yet forthcoming... done this b4? lol
BTW, yes, I intend to install magisk, root and AOSip 8.1.
Anyway, I got past the original problem, kinda.
My problem arose from having too many adb installations in too many places on my windows machine.
I deleted everything, installed a single instance, put everything in a single folder on my desktop, opened a windows powershell there and then adb/powershell was able to find the twrp file.
Next problem was a "no such partition" error which was solved by a google search and specifying the slot location in the flash command.
NOW I have twrp recovery installed but the touchscreen doesn't work so its useless. AAAAAARRRRGHH!
Should I post a new thread or is this still OP?
I'm still in the same boat as my goal is a working TWRP recovery....
please advise

A_Pac1 said:
You should try using a Type-C to USB cable, I ran into the same issue trying to flash mine using supplied cable, once I tried the USB to Type-C it worked. :good:
Click to expand...
Click to collapse
Worth a try I guess but I am maintaining a solid connect to my PC and all other commands seem flawless. My problem has evolved now. I have installed twrp but now the touchscreen wont work.

rignfool said:
Stop the presses!
Please do not use that old ass version of TWRP...
Many many fixes since then...
Please read and familiarize yourself with
http://mata.readthedocs.io/en/latest/
And also realize that you will not ever have persistent TWRP
Click to expand...
Click to collapse
You might have just solved my newly evolved issue (got twrp installed but now touchscreen doesn't work)
Will get on it and let you know.
Quick question; What do you mean twrp is not persistent? Does that mean I have to install it and install magisk and whatever rom from twrp on the first shot before rebooting? At what point does twrp disappear?
What other pitfall, tips or tricks should I be aware of?

MackHoncho said:
You might have just solved my newly evolved issue (got twrp installed but now touchscreen doesn't work)
Will get on it and let you know.
Quick question; What do you mean twrp is not persistent? Does that mean I have to install it and install magisk and whatever rom from twrp on the first shot before rebooting? At what point does twrp disappear?
What other pitfall, tips or tricks should I be aware of?
Click to expand...
Click to collapse
It's not persistent as in it won't survive the flashing of the stock boot.img.

MackHoncho said:
Thank you in advance for answering about three questions as of yet forthcoming... done this b4? lol
BTW, yes, I intend to install magisk, root and AOSip 8.1.
Anyway, I got past the original problem, kinda.
My problem arose from having too many adb installations in too many places on my windows machine.
I deleted everything, installed a single instance, put everything in a single folder on my desktop, opened a windows powershell there and then adb/powershell was able to find the twrp file.
Next problem was a "no such partition" error which was solved by a google search and specifying the slot location in the flash command.
NOW I have twrp recovery installed but the touchscreen doesn't work so its useless. AAAAAARRRRGHH!
Should I post a new thread or is this still OP?
I'm still in the same boat as my goal is a working TWRP recovery....
please advise
Click to expand...
Click to collapse
I had the same issue with using an older version of Mata TWRP... You need to install TWRP-MATA_11

Solved
My Windows 10 machine isnt set to show file extensions.
was trying to fastboot twrp-11 as I named it; recovery.img
fastboot wanted recovery.img.img
please laugh hardily

aer0zer0 said:
@barteringram is right, no recovery partition.
Your command needed is this.
Fastboot flash boot whateveryounamedtwrp.img.
Click to expand...
Click to collapse
Thank you, thank you, THANK YOU!! You would not believe how long I've been trying to solve this problem! Now I can get on with tweaking and personalizing my Oneplus 6T!

vonstarr said:
Thank you, thank you, THANK YOU!! You would not believe how long I've been trying to solve this problem! Now I can get on with tweaking and personalizing my Oneplus 6T!
Click to expand...
Click to collapse
So op6t is easier (I just bought one)
Fastboot boot nameoftwrp.img
It'll boot twrp without flashing it to the phone. Makes life easier. Mata doesn't have this option.