Database Users

Can't flash KRT16S (from KRT16O)

Hi everybody
When the factory images came out, I flash my N4 with the stock factory images that we used to find here : https://developers.google.com/android/nexus/images#occamkrt16s because it is now the KRT16S build
After a few days, when the KRT16S build came out, I was proposed in my phone to update it. I downloaded it, tried to flash it but nothing worked, I'm still on KRT16O and the OTA doesn't appear anymore... Then I remembered that I flashed a mod found here : http://forum.xda-developers.com/showthread.php?t=2527525 (that's a great mod btw) so I guessed that I could reflash the undo file available on the thread, flash the ota file dl mannually (I attached it in this thread) which I did through TWRP. Then I was able to see the problem, it told me that, from what I remember, Agenda.apk was missing (I think it's diary in english, not sure) then I remembered that I manually deleted some apps I never use (diary is one of them...)
So, what's next, shall I reflash the gapps to finally update my phone
Thanks for your help :laugh:

Are you using latest TWR? I did it ok
Sent from my Nokia 3210

howard bamber said:
Are you using latest TWR? I did it ok
Sent from my Nokia 3210
Click to expand...
Click to collapse
I run the 2.6.3.3 version I guess it's the latest because I flashed it a few days ago
I installed the few missing apps that i uninstalled and Calendar didn't create any error. This time it EmailGoogle.apk... I transformed it as a system application and I went to /system/app to change its name from com.google.android.apps.email or something to EmailGoogle.apk, didn't work... But I'm sure I'm on the way to achieve it :victory:
Here's the whole mesage :
Code:
Updating partition details...
Installing '/sdcard/Download/70f3bd408ca3d142509cd4bace2f2c7e3aa486c6.signed-occam-KRT16S-from-KRT16O.70f3bd40.zip'
Checking for MD5 file...
Skipping MD5 check : no MD5 dile found.
Verifying current system...
"/system/app/EmailGoogle.apk" has unexpected contents.
E:Error executing updater binary in zip '/sdcard/Download/70f3bd408ca3d142509cd4bace2f2c7e3aa486c6.signed-occam-KRT16S-from-KRT16O.70f3bd40.zip
Error flashing zip '/sdcard/Download/70f3bd408ca3d142509cd4bace2f2c7e3aa486c6.signed-occam-KRT16S-from-KRT16O.70f3bd40.zip'
Updating partition détails...
[CENTER][COLOR="Red"][SIZE="4"]Failed[/SIZE][/COLOR][/CENTER]

azertguigui said:
I run the 2.6.3.3 version I guess it's the latest because I flashed it a few days ago
I installed the few missing apps that i uninstalled and Calendar didn't create any error. This time it EmailGoogle.apk... I transformed it as a system application and I went to /system/app to change its name from com.google.android.apps.email or something to EmailGoogle.apk, didn't work... But I'm sure I'm on the way to achieve it :victory:
Here's the whole mesage :
Code:
Updating partition details...
Installing '/sdcard/Download/70f3bd408ca3d142509cd4bace2f2c7e3aa486c6.signed-occam-KRT16S-from-KRT16O.70f3bd40.zip'
Checking for MD5 file...
Skipping MD5 check : no MD5 dile found.
Verifying current system...
"/system/app/EmailGoogle.apk" has unexpected contents.
E:Error executing updater binary in zip '/sdcard/Download/70f3bd408ca3d142509cd4bace2f2c7e3aa486c6.signed-occam-KRT16S-from-KRT16O.70f3bd40.zip
Error flashing zip '/sdcard/Download/70f3bd408ca3d142509cd4bace2f2c7e3aa486c6.signed-occam-KRT16S-from-KRT16O.70f3bd40.zip'
Updating partition détails...
[CENTER][COLOR="Red"][SIZE="4"]Failed[/SIZE][/COLOR][/CENTER]
Click to expand...
Click to collapse
You can not install an apk in recovery. Use ES File Explorer to install the apk. In addition, to avoid the error, while you are in recovery, select "Mount" and uncheck the box "System" when flashing a zip file.

taodan said:
You can not install an apk in recovery. Use ES File Explorer to install the apk. In addition, to avoid the error, while you are in recovery, select "Mount" and uncheck the box "System" when flashing a zip file.
Click to expand...
Click to collapse
I did not installed it with TWRP, I did it by simply openning the apk while my phone is on, it installed the Email app...
But thanks anyway for the mount function, I'll give a try

azertguigui said:
I did not installed it with TWRP, I did it by simply openning the apk while my phone is on, it installed the Email app...
But thanks anyway for the mount function, I'll give a try
Click to expand...
Click to collapse
Simpler way to update without OTA package:
Download the factory image, and before running the flash-all script, open it with a text editor and change "fastboot -w update" to "fastboot update"

MameTozhio said:
Simpler way to update without OTA package:
Download the factory image, and before running the flash-all script, open it with a text editor and change "fastboot -w update" to "fastboot update"
Click to expand...
Click to collapse
You mean with the sdk? I don't know how to use it, when I flash something, it's with the recovery or the nexus root toolkit..
-From my Nexus 4-

UP

azertguigui said:
UP
Click to expand...
Click to collapse
**

azertguigui said:
UP
Click to expand...
Click to collapse
azertguigui said:
**
Click to expand...
Click to collapse
Not sure what you're trying to say here..
azertguigui said:
You mean with the sdk? I don't know how to use it, when I flash something, it's with the recovery or the nexus root toolkit..
-From my Nexus 4-
Click to expand...
Click to collapse
Try avoiding toolkits as they can lead to problems and leave you stuck with no idea what to do. Yes he is referring to the sdk. Only the platform-tools folder in the sdk is required so if you don't wanna bother downloading the complete file, just download the platform-tools from here and extract it to an appropriate location. Extract and move the Factory Image that you downloaded to your platform-tools directory. If you don't want your data to be erased, edit the flash-all script with a text editor and remove -w and save. Plug in your phone. Make sure you have the drivers installed. In the platform tools directory, press shift+right click> open command prompt here. Type adb devices. You will see "device <Serial Number>. If you don't, your drivers are faulty. Then type adb reboot bootloader. Once your phone has rebooted into bootloader, make sure that it is being detected by typing fastboot devices. You should see an output similar to adb devices. Now simply run the flash-all script and let it do its work. Reboot after flashing is completed.
Hope this helps!

try search any youtube on how to flash factory images to your device. I guess u'll find lots.
Sent from my Nexus 4 using XDA Premium 4 mobile app

Words of advice, learn how to use ADB instead of relying solely on toolkits. It's very simple actually.
Now there's a simple way to update which is sideload. Oh and btw to sideload, you still need ADB though (this is why learning ADB is VERY important to us, the N4 users). Here is a video tutorial on how to perform adb sideload. All the links are attached in his youtube video.

Ibrahim.Rahman said:
Not sure what you're trying to say here..
Click to expand...
Click to collapse
:laugh: I quoted my own UP post but it told me that my post should have at least 2 letters, so I taped the spacebar twice and it wrote this
Ibrahim.Rahman said:
Try avoiding toolkits as they can lead to problems and leave you stuck with no idea what to do. Yes he is referring to the sdk. Only the platform-tools folder in the sdk is required so if you don't wanna bother downloading the complete file, just download the platform-tools from here and extract it to an appropriate location. Extract and move the Factory Image that you downloaded to your platform-tools directory. If you don't want your data to be erased, edit the flash-all script with a text editor and remove -w and save. Plug in your phone. Make sure you have the drivers installed. In the platform tools directory, press shift+right click> open command prompt here. Type adb devices. You will see "device <Serial Number>. If you don't, your drivers are faulty. Then type adb reboot bootloader. Once your phone has rebooted into bootloader, make sure that it is being detected by typing fastboot devices. You should see an output similar to adb devices. Now simply run the flash-all script and let it do its work. Reboot after flashing is completed.
Hope this helps!
Click to expand...
Click to collapse
Thanks, I'll give a try
saifulh2304 said:
try search any youtube on how to flash factory images to your device. I guess u'll find lots.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
arffrhn said:
Words of advice, learn how to use ADB instead of relying solely on toolkits. It's very simple actually.
Now there's a simple way to update which is sideload. Oh and btw to sideload, you still need ADB though (this is why learning ADB is VERY important to us, the N4 users). Here is a video tutorial on how to perform adb sideload. All the links are attached in his youtube video.
Click to expand...
Click to collapse
thanks guys, I'm gonna find tutorials on the web like the one you pointed to me

azertguigui said:
:laugh: I quoted my own UP post but it told me that my post should have at least 2 letters, so I taped the spacebar twice and it wrote this
Click to expand...
Click to collapse
Haha right!
Sent from my Nexus 4 using xda app-developers app

[Utility] Android boot Manager APK

Android Boot Manager (ABM), my goal is to make the procedure (Backup, Unpack, Edit, Repack and Flashe boot.img or recovery.img) so easy and accessible to all users without resorting to the command prompt , only a single click to get a quick and successful outcome at the same time .
This is the third version of the program.
Source (GITHUB SOURCE https://github.com/aToxyD/android_boot_image_manager_apk).
WHAT'S NEW
- Some optimization.
- Add new Text Editor with high syntax.
THANKS
* xiaolu, original author of boot.img tool(GITHUB SOURCE https://github.com/xiaolu/mkbootimg_tools).
* Modding.MyMind, for his heavily modification of boot.img tool.
* Tah Wei Hoon, for TextWarrior.
* Dmytro Tarianyk, for Android Floating Action Button.
* Anthony Restaino, for Grant.
IMPORTANT
- Root is only necessary for Unpacking boot patched by "superSu or Magisk" and Backup/Flash Operations, so if you want to unpack stock boot or you have your favorite flasher apk like "Rachr", if so you dont need to check "Root Access" in settings menu.
- Please uninstall any previous version of ABM before installing the newer.

I do not like people to coming here and take what they wanted and leave like a thief , at least leave a comment. . .
This work is for all, so help your self.

atoxyd said:
Android Boot Manager (ABM), my goal is to make the procedure (Backup, Unpack, Edit, Repack and Flashe boot.img or recovery.img) so easy and accessible to all users without resorting to the command prompt , only a single click to get a quick and successful outcome at the same time .
This is the second version of the program.
WHAT'S NEW
- Corrected some bugs related to compatibility with Android 6.
- Use xiaolu mkbootimg tools (GITHUB SOURCE https://github.com/xiaolu/mkbootimg_tools)
TODO
- add support to x86, mips arch.
- add support to put files to unpacked folder.
- add support to combinedboot , in Xperia device recovery ramdisk is combined with system ramdisk.
IMPORTANT
- The apk need root access to work.
- Note that make change by adding files to unpacked folder with root explorer, the owner will be root and the apk will not work, if you do this you must change the owner to ABM apk.
THANKS
* xiaolu, original author of boot.img tool(GITHUB SOURCE https://github.com/xiaolu/mkbootimg_tools).
* modding.MyMind, for his heavily modification of boot.img tool.
* @bigsupersquid for his support and motivate from the beginning.
Click to expand...
Click to collapse
mtk support?

lixia1998 said:
mtk support?
Click to expand...
Click to collapse
Certainly I am working on this , but you should help me.

New version won't install on Kit Kat

PiggyFlooper said:
New version won't install on Kit Kat
Click to expand...
Click to collapse
Okay my friend, try to uninstall the old version, and tell me.

atoxyd said:
Okay my friend, try to uninstall the old version, and tell me.
Click to expand...
Click to collapse
You were right, I'll start project tonight editing ramdisk on my LG Volt

Are extracted files accessible in file system? I can't find them

levone1 said:
Are extracted files accessible in file system? I can't find them
Click to expand...
Click to collapse
Unpacked to /data/local/ABM

PiggyFlooper said:
Unpacked to /data/local/ABM
Click to expand...
Click to collapse
But beware when you add new files to the unpacked folder , you must take into account that owner will be. root , so you must set owner to ABM apk.

atoxyd said:
But beware when you add new files to the unpacked folder , you must take into account that owner will be. root , so you must set owner to ABM apk.
Click to expand...
Click to collapse
So I tested with twrp IMG, and successful unpack to /data/local. Then I tried with my current kernel, and nothing's happening. I get a message that's not clear to me, (screenshot 2), and no output. Any ideas?

levone1 said:
So I tested with twrp IMG, and successful unpack to /data/local. Then I tried with my current kernel, and nothing's happening. I get a message that's not clear to me, (screenshot 2), and no output. Any ideas?
Click to expand...
Click to collapse
It seems that you delete the directory /data/local/ABM, So close the apk and open it again or wipe apk data and try again, if any problems tell me please :thumbup:

atoxyd said:
It seems that you delete the directory /data/local/ABM, So close the apk and open it again or wipe apk data and try again, if any problems tell me please :thumbup:
Click to expand...
Click to collapse
That was my original thought, so I wiped data and tries again, but no different... I'll just uninstall and reinstall, and probably be fine. Thanks

atoxyd said:
It seems that you delete the directory /data/local/ABM, So close the apk and open it again or wipe apk data and try again, if any problems tell me please :thumbup:
Click to expand...
Click to collapse
Same thing after reinstall. I tried with twrp file again, and works fine, but with kernel file, error msg...

It seems that the image you want to unpack it is not an android image.

atoxyd said:
It seems that the image you want to unpack it is not an android image.
Click to expand...
Click to collapse
It's the AOSP kernel from the ROM I'm currently using.
https://mega.nz/#!do51zAZS!QG5jTdpynPjNs7jrbERsdwRKjdac9tz-0SxUX6HyJsk

Try to edit devices.xml in /sdcard/ABM directory and backup kernel using ABM app, after try to unpack boo.img backed up, you find it in /sdcard/ABM/backup directory.

levone1 said:
It's the AOSP kernel from the ROM I'm currently using.
https://mega.nz/#!do51zAZS!QG5jTdpynPjNs7jrbERsdwRKjdac9tz-0SxUX6HyJsk
Click to expand...
Click to collapse
Well my friend, try to delete space in the name of image.
Linux ..........img will be
Linix_..........img

levone1 said:
It's the AOSP kernel from the ROM I'm currently using.
https://mega.nz/#!do51zAZS!QG5jTdpynPjNs7jrbERsdwRKjdac9tz-0SxUX6HyJsk
Click to expand...
Click to collapse
Well my friend, delete space in the name of the image.
Linux 3.10....img
will be
Linux_3.10....img

Well my friend @levone1, delete space in the name of the image.
Linux 3.10....img
will be
Linux_3.10....img

Adaway in Android N (100% Working)

Follow these steps and you will definitely get it working
1.Flash the latest Supersu.zip beta
2.Flash these files Check link here
3.Install app and enable it
4.It works

I wonder what changed with nougat in order to you'se this method?with MM and before the app was enough and just working well.

Midomad said:
I wonder what changed with nougat in order to you'se this method?with MM and before the app was enough and just working well.
Click to expand...
Click to collapse
Basically Nougat made harder to write system partition. That zip applies a workaround making the default hosts file (/system/etc/hosts) a symlink to another host file in a writable mountpoint (/su/etc/hosts). You can find more info here https://github.com/AdAway/AdAway/issues/770.

Midomad said:
I wonder what changed with nougat in order to you'se this method?with MM and before the app was enough and just working well.
Click to expand...
Click to collapse
It is the same issue as discussed here:
http://forum.xda-developers.com/nex...-to-unlock-tethering-nexus-5x-t3231301/page20
The workaround described above doesn't change /system (which would get error corrected back to original), but instead masks the file in /system with an alternate one during boot.

Thank you very much. It works like a charm.

Work also with SuperSU?

Skar3 said:
Work also with SuperSU?
Click to expand...
Click to collapse
Sure,why not?

Midomad said:
Sure,why not?
Click to expand...
Click to collapse
sorry, you're right, I misread Superuser

Am I mistaken, it's working for me without any trick? I am on nougat rooted stock.
Enviado desde mi Nexus 5X mediante Tapatalk

maluus said:
Am I mistaken, it's working for me without any trick? I am on nougat rooted stock.
Click to expand...
Click to collapse
Without this "trick" AdAway It doesn't show an error or fail... but it doesn't works. Try pinging any "supposed to be blocked" url. You may realized it's not blocked anymore.

I attempted this but it does not appear to have installed. I flashed via chainfire. Any ideas?

Thanks, this is much appreciated!
VivaErBetis said:
Without this "trick" AdAway It doesn't show an error or fail... but it doesn't works. Try pinging any "supposed to be blocked" url. You may realized it's not blocked anymore.
Click to expand...
Click to collapse
Yes, this "trick" essentially writes the hosts file to another location, and creates a symlink to it. This way it doesn't need to write to the /system/ directory.
There is a one-line command you can run in terminal emulator that lets you write to /system, but you need to run it each time you reboot, and it's a bit of a nuisance to do so. This lets Adaway work each time without the necessity of a terminal command.

daver68 said:
There is a one-line command you can run in terminal emulator that lets you write to /system, but you need to run it each time you reboot, and it's a bit of a nuisance to do so. This lets Adaway work each time without the necessity of a terminal command.
Click to expand...
Click to collapse
Just an FYI, if you install SuperSU you can write to system and it will stick. You wouldn't need to do anything each boot in that case.

sfhub said:
Just an FYI, if you install SuperSU you can write to system and it will stick. You wouldn't need to do anything each boot in that case.
Click to expand...
Click to collapse
Strange, this is not my experience. I'm running PureNexus (7) and SuperSU Pro, and Adaway does not write to the system. It errors out, until I re-mount /system in terminal emulator

VivaErBetis said:
Without this "trick" AdAway It doesn't show an error or fail... but it doesn't works. Try pinging any "supposed to be blocked" url. You may realized it's not blocked anymore.
Click to expand...
Click to collapse
I didn't try any specific url but it seems like working on their test site.
Enviado desde mi Pixel XL mediante Tapatalk

daver68 said:
Strange, this is not my experience. I'm running PureNexus (7) and SuperSU Pro, and Adaway does not write to the system. It errors out, until I re-mount /system in terminal emulator
Click to expand...
Click to collapse
That is a different problem than the one on stock Noguat then.
On stock without dm-verity disabled, the kernel will use forward error correction to "fix" you changes (ie data corruption) and replace with original. Basically you make the changes and they don't show up.

Nougat , flashed and no app installed, I downloaded adway from official website and working.

Link to original thread just for sure: http://forum.xda-developers.com/showthread.php?t=2190753

Please create Update for Android O.

AdAway works fine on O; no change from Nougat.

[Thor][Apollo] Unlocking bootloader with any firmware

Hello. At first, I did not invent anything new, just checked some my guess on a other motherboard. All thanks and credits to our great developers. As always, all at your own risk.
It does not work on the Fire HDX 8.9 (Saturn)!
All steps in this manual are not necessary but they are present for maximum safety. So I highly recommend do anything exactly in this way. Sorry my English as always =)
Update2 - actual method is https://forum.xda-developers.com/showpost.php?p=75284993&postcount=1006
Update: now you can use updated draxie's utility - http://forum.xda-developers.com/kindle-fire-hdx/general/multi-platform-1-click-bootloader-t3241014
Prerequisites for Installation
- Root
- Installed adb and fastboot drivers - official - https://drive.google.com/open?id=0B2twXJIOgv-UWWdwRl9TQS11b0k (if your system language not English, after fail navigate to "Program Files (x86)\Lab126\drivers" and run dpinst.exe /EL or switch to English =) for x64 need to disable driver signature verification before install ) also you can use pdanet drivers - http://forum.xda-developers.com/showpost.php?p=59268023&postcount=8
Manual:
1. Create unlock file following this instruction - https://forum.xda-developers.com/ki...r-firmware-t3463982/post70881555#post70881555
2. Flash old vulnarable aboot and cubed twrp (just in case). Check that all these commands executed without errors. If you'll get one - read second post below. If your firmware <=13(14)3.2.3.2 skip this step.
Download aboot and twrp for Thor (Kindle Fire HDX 7) https://drive.google.com/open?id=0B2twXJIOgv-UMGxXMUZPZTlZTUk or for Apollo (Kindle Fire HDX 8.9) - https://drive.google.com/open?id=0B2twXJIOgv-URzJDQkczNzRLaHM - and put this two files (twrp_cubed.img and aboot_vuln.mbn) into root of your kindle internal storage.
Run:
Code:
adb shell
su
dd if=/sdcard/twrp_cubed.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
dd if=/sdcard/aboot_vuln.mbn of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Now you have working twrp recovery. It already works even without unlocked bootloader. You could boot into it by holding volUP during grey kindle logo. But no need to flash anything until unlock. At this point this is just emergency tool if something goes wrong =)
3. Flash unlock file.
Now, if you reboot, you will go straight into fastboot because of old aboot - newest boot.img can't load with it. If your firmware <13(14).4.1.1 you need run "adb reboot bootloader" to boot into fastboot.
Time to flash your unlock file.
Code:
fastboot -i 0x1949 flash unlock 0xmmssssssss.unlock
You must obtain "unlock code is correct".
Grats. You are perfect =)
You can flash:
CM13 - http://forum.xda-developers.com/kin...ment/rom-cm-13-kindle-hdx-2015-11-29-t3259732
CM 12.1 - http://forum.xda-developers.com/kin...ent/rom-cm-12-unofficial-apollo-thor-t3050199
Or stock repacked latest 4.5.5.2 rom - https://drive.google.com/open?id=0B2twXJIOgv-UVFFtN2RYNXNUZ0k (13.x - thor, 14.x - apollo)
Do not flash original stock firmwares.
Regards and thank to all - @dpeddi, @vortox, @draxie, @ggow, @Ralekdev, @jcase, @Hashcode
And greatest thanks for motherboard for my experiments to @MahmudS !

FAQ:​1. if your get "not such file or directory" after su in step 2 (this is SAFESTRAP related possibly)- try to use next commands:
Code:
adb shell
su
dd if=/storage/emulated/0/twrp_cubed.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
dd if=/storage/emulated/0/aboot_vuln.mbn of=/dev/block/platform/msm_sdcc.1/by-name/aboot
http://forum.xda-developers.com/showpost.php?p=68751981&postcount=35

I think you can use greatest @draxie tool - http://forum.xda-developers.com/kindle-fire-hdx/general/multi-platform-1-click-bootloader-t3241014 with doing step2 only. But it need to test. Anyway I highly recommend get your hw id's before any actions.

Daredevil
ONYXis said:
Code:
dd if=/sdcard/aboot_vuln.mbn of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Click to expand...
Click to collapse
Great job! So, simply flashing the vulnerable bootloader "just works"...
Are you absolutely positive?
Although I've been expecting this all along
[but wouldn't dare trying, since the HDX is *still* my only tablet],
I'm wondering what the supposed "rollback protection" after 3.2.8 really covers.
Fixed issue (now hidden)
BTW: I get the exact same MD5 hash for both versions of 'aboot_vuln.mbn' (the two 'cubed_twrp.img' are different).
Code:
66b7df0db97c7c2905d1d61199c816a5 13-aboot_vuln.mbn
66b7df0db97c7c2905d1d61199c816a5 14-aboot_vuln.mbn
087e7125c48fcbebcc2f51a9c46379f2 13-twrp_cubed.img
c06799a4a8d48d9dd55aea002def1caf 14-twrp_cubed.img
H[66b7df0db97c7c2905d1d61199c816a5]=aboot-13.3.2.3.2_user_323001720.mbn
Please double-check to make sure Apollo users won't get fried.
You do say that not all steps are necessary. Can you advise if my thinking below sounds correct?
I'm considering adding this to 1-Click; that's why I'm asking.. (If I could also include a surefire way
to root the device beforehand, we'd be all set for a truly 1-Click experience from scratch, modulo
strange Windows behaviour. [if anybody still cares ;-P])
I suppose getting rid of the potentially dangerous anti-rollback-related files is good measure,
but if they had been making any difference, this method shouldn't really work, right?
So, this may not be needed at all.
I'm also thinking that flashing TWRP in the same step -although nice- is not strictly needed.
Would you agree?

Are you absolutely positive?
Click to expand...
Click to collapse
I tried this with two devices with two firmwares at each after rollback-upgrade proccess to be sure.
Although I've been expecting this
Click to expand...
Click to collapse
Same as I. Just need to be checked.
: I get the exact same MD5 hash for both versions of 'aboot_vuln.mbn
Click to expand...
Click to collapse
Strange, I use same aboots in this tool - http://forum.xda-developers.com/kin...-to-unbrick-kindle-fire-hdx-firmware-t3277197 =) need to fix=)
Re-uploaded aboot from 14.3.2.3.2 - 4A2BE8E374C8D1FCE8E6743AC2D09BB0
Thank you.
'm also thinking that flashing TWRP in the same step -although nice- is not strictly needed.
Click to expand...
Click to collapse
Of course. But... why not? and sometimes fastboot flash recovery at very first time don't work.
but if they had been making any difference, this method shouldn't really work, right?
So, this may not be needed at all.
Click to expand...
Click to collapse
This is need to check. I really do not like that factory_provision_tool.
But I agree that all magic is just dd'ing of old aboot.

ONYXis said:
I tried this with two devices with two firmwares at each after rollback-upgrade proccess to be sure.
Click to expand...
Click to collapse
Sounds good.
ONYXis said:
Same as I. Just need to be checked.
Click to expand...
Click to collapse
Indeed! And, that's quite a daring achievement. Big thanks for that!
ONYXis said:
Strange, I use same aboots in this tool - http://forum.xda-developers.com/kin...-to-unbrick-kindle-fire-hdx-firmware-t3277197 =) need to fix=)
Re-uploaded aboot from 14.3.2.3.2 - 4A2BE8E374C8D1FCE8E6743AC2D09BB0
Thank you.
Click to expand...
Click to collapse
I also verified this, just to be sure; and, chose to hide the issue in my post above.
H[4a2be8e374c8d1fce8e6743ac2d09bb0]=aboot-14.3.2.3.2_user_323001720.mbn
ONYXis said:
Of course. But... why not? and sometimes fastboot flash recovery at very first time don't work.
Click to expand...
Click to collapse
I'll see if including the TWRP images in 1-Click pushes the size of the ZIP over the XDA limit.
I suppose I could opt to fetch from the net if it doesn't, but then I need to enable networking for the VM.
ONYXis said:
This is need to check. I really do not like that factory_provision_tool.
But I agree that all magic is just dd'ing of old aboot.
Click to expand...
Click to collapse
Yes. Please check!

draxie said:
Yes. Please check!
Click to expand...
Click to collapse
Ok. So... Another motherboard with stock 3.2.3.2
Updated it through OTA to 3.2.5 > 4.1.1 > 4.5.2 > 4.5.4 > 4.5.5 > 4.5.5.1 > 4.5.5.2
Rollbacked to 3.2.8, updated to 4.5.5.1, Kingroot.
Code:
adb shell
su
dd if=/sdcard/aboot_vuln.mbn of=/dev/block/platform/msm_sdcc.1/by-name/aboot
reboot
Boot into fastboot. At this point need to have id's already!!!
Flash unlock, flash recovery, flash upHDXed 4.5.5.2 rom. Succesfully booted up. :fingers-crossed:
OP edited.

ONYXis said:
Rollbacked to 3.2.8, updated to 4.5.5.1, Kingroot.
Click to expand...
Click to collapse
I don't suppose this rollback is essential, is it?
It should work just as well to stop the update before the currently unrootable 4.5.5.2, right?
ONYXis said:
Flash unlock, flash recovery, flash upHDXed 4.5.5.2 rom. Succesfully booted up. :fingers-crossed:
Click to expand...
Click to collapse
Nice. I'll PM you soon with an updated 1-Click, for testing, if you don't mind.
(I cannot [and don't even want to] test this on my only tablet.)

draxie said:
I don't suppose this rollback is essential, is it?
Click to expand...
Click to collapse
just checked all variations.
I'll PM you soon with an updated 1-Click, for testing, if you don't mind.
Click to expand...
Click to collapse
Of course.

Can it work on hdx 8.9?

Although I have registered my 'thanks' on various posts it seems hollow to not explicitly recognize @ONYXis and @draxie for their tremendous contributions supporting this device both past and present. The ability to unlock virtually any rooted 3rd gen HDX is a true game changer that will revive interest in this discontinued gem that still competes nicely with contemporary offerings. Well done, gents!

wizard_mini said:
Can it work on hdx 8.9?
Click to expand...
Click to collapse
You mean Saturn? No, sorry.

Hi, i cant get the adb driver to work with my german Win 10 64bit
dpinst.exe /EL starts fine but throws an error while installing.
So i wanted to try the pdanet drivers but im not sure how to get my fire into fastboot mode ("- connect your kindle already waiting in fastboot mode with usb cable to pc").
Any help? :>

Maybe you need to disable driver signature verification before install. Google it.
fastboot -
Code:
adb reboot bootloader

ONYXis said:
Maybe you need to disable driver signature verification before install. Google it.
fastboot -
Code:
adb reboot bootloader
Click to expand...
Click to collapse
Thanks, that worked. Now i have the following problem when trying "python.exe cuberHDX.py 0xmmssssssss": (tried with 64 and 32bit Python + gmpy2, because that seems to be the problem sometimes)
File "cuberHDX.py", line 7, in <module>
from gmpy2 import iroot, mpz
ImportError: DLL load failed: %1 ist keine zulõssige Win32-Anwendung. [last part means not a valid win 32 application]
Thanks for your help!

It is python installation related problem, I really not familar with that. You could post your id's and I'll create and attach your unlock-file.

ONYXis said:
It is python installation related problem, I really not familar with that. You could post your id's and I'll create and attach your unlock-file.
Click to expand...
Click to collapse
0x000015
0x1022b00d
Thank you!

RambaaZambaa said:
0x000015
0x1022b00d
Thank you!
Click to expand...
Click to collapse
Welcome.
Need to unarchive.

ONYXis said:
Welcome.
Need to unarchive.
Click to expand...
Click to collapse
Next problem :silly:
As long as im not su i can cd to sdcard folder (or storage/sdcard0). But then i cant use the "dd if=/sdcard/twrp_cubed.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery" command.
So when im SU the command fails and i also cant enter the sdcard folder (no such file or directory). Strange...

RambaaZambaa said:
Next problem :silly:
As long as im not su i can cd to sdcard folder (or storage/sdcard0). But then i cant use the "dd if=/sdcard/twrp_cubed.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery" command.
So when im SU the command fails and i also cant enter the sdcard folder (no such file or directory). Strange...
Click to expand...
Click to collapse
Sorry, really don't understand )
Pls, provide screenshot of cmd with your error.
And try to follow instructions directly.There is no any cd command.

[GUIDE] [MAGISK] Root stock Oreo B520 B521 B562

DISCLAIMER: I will not be responsible of any issues you could face following this how-to. You do it at your own risk!​
Here is a guide to root Honor 8 B521 Oreo. I did this on FRD-L09C432B521. Even if i think the "easy method" should work with other iteration of the phone (L02, L19, ...), I am not sure ramdisk is the same for all so test it if you feel lucky and please report if it works or not.
Requirements:
- Honor 8 running Oreo
- Unlocked Bootloader
- adb and fastboot installed on your computer (https://forum.xda-developers.com/android/software-hacking/alpha-adb-fastboot-installer-windows-t3637255 (Hit the thanks button)
Long method: (should work for all honor 8)​
1 -- Visit http://pro-teammt.ru/firmware-database/ and search your exact build (FRD-L09C432B521 for me). If you have several phones listed for your build, click the name of the build on the left. This will open an xml file on the first line of which you will see the exact model it is for.
2 -- Once you know which firmware is yours, click on "filelist". This will list the files for this build and theirs url. Copy the link pointing to "update.zip" (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v159456/f1/full/update.zip for me). Decompress it wherever you want.
3 -- Download and run Huawei Update Extractor (Hit the thanks button) . Untick "verify header checksum" in "settings" tab.
4 -- In the "extract" tab, click on "..." and select "update.app" in the previously "update.zip" decompressed folder.
5 -- Files from "update.app" should now be listed. Find "ramdisk" and right click on it. Choose "extract" and you will be able to save the file wherever you want. Copy this file on your phone.
6 -- On your phone: Go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. Grant permission to the manager to access your storage in phone settings > applications.
7 -- Run Magisk Manager, it will ask you if you want to install the zip. Select "Yes". It will now ask if you want to flash the zip or to patch a boot image, choose this last one. Point to the ramdisk img you previously copied on your phone. Magisk manager will now patch it and create a new "patched_boot.img" file. Copy this on your computer.
8 -- On your computer: Open a command prompt where you copied "patched_boot.img". Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_boot.img
fastboot reboot
9 -- Your phone will now reboot and be rooted. To unroot, repeat the process (8) with your stock ramdisk (the one extracted with Huawei Update Extractor)
Easy method​
If your build is FRD-L09C432B521, FRD-L02C432B521, FRD-L04C567B520 or FRD-L09C432B562, you can use these already patched ramdisk.img.
patched_RAMDISKL09B521.img
stock_RAMDISKL09B521.img
patched_RAMDISKL02B521.img thanks to @Sharath007for the file
patched_RAMDISKL04B520.img thanks to @macbuggo for the file
stock_RAMDISKL04B520.img thanks to @macbuggo for the file
patched_RAMDISKL09B562.img thanks to @topscorer for the file
stock_RAMDISKL09B562.img thanks to @topscorer for the file
On your computer: Open a command prompt where you downloaded "patched_RAMDISKL09B521.img" (or L02/L04 ramdisk) .
Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_RAMDISKLXXBXXX.img (the exact name depends of the ramdisk you downloaded)
fastboot reboot
Your phone will now reboot
Go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it.
You now got root. To unroot, repeat the process with stock ramdisk.

Worked in the first attempt.. Safety net passes..

Sharath007 said:
Worked in the first attempt.. Safety net passes..
Click to expand...
Click to collapse
Did you do this on L09? Otherwise, could you share the patched ramdisk so I can add it in OP?

stephtban said:
Did you do this on L09? Otherwise, could you share the patched ramdisk so I can add it in OP?
Click to expand...
Click to collapse
Thanks for your guide. I did it on my FRD-L02 Variant.
FRD_L02_patched_boot

Sharath007 said:
Thanks for your guide. I did it on my FRD-L02 Variant.
FRD_L02_patched_boot
Click to expand...
Click to collapse
Thanks! I added your ramdisk to OP. Do you still have unpatched version of it for easy unrooting?

delete

PremiumBlaze said:
Can't guys flash Magisk using twrp? It worked for me in android oreo.
Click to expand...
Click to collapse
You can indeed use twrp but as it is not completely functional yet, some people don't use it. Besides, Open Kirin suggest to flash their rom with fastboot so it limits the interest of having twrp.

stephtban said:
DISCLAIMER: I will not be responsible of any issues you could face following this how-to. You do it at your own risk!​
Here is a guide to root Honor 8 B521 Oreo. I did this on FRD-L09C432B521. Even if i think the "easy method" should work with other iteration of the phone (L02, L19, ...), I am not sure ramdisk is the same for all so test it if you feel lucky and please report if it works or not.
Requirements:
- Honor 8 running Oreo
- Unlocked Bootloader
- adb and fastboot installed on your computer (https://forum.xda-developers.com/android/software-hacking/alpha-adb-fastboot-installer-windows-t3637255 (Hit the thanks button)
Long method: (should work for all honor 8)​
1 -- Visit http://pro-teammt.ru/firmware-database/ and search your exact build (FRD-L09C432B521 for me). If you have several phones listed for your build, click the name of the build on the left. This will open an xml file on the first line of which you will see the exact model it is for.
2 -- Once you know which firmware is yours, click on "filelist". This will list the files for this build and theirs url. Copy the link pointing to "update.zip" (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v159456/f1/full/update.zip for me). Decompress it wherever you want.
3 -- Download and run Huawei Update Extractor (Hit the thanks button) . Untick "verify header checksum" in "settings" tab.
4 -- In the "extract" tab, click on "..." and select "update.app" in the previously "update.zip" decompressed folder.
5 -- Files from "update.app" should now be listed. Find "ramdisk" and right click on it. Choose "extract" and you will be able to save the file wherever you want. Copy this file on your phone.
6 -- On your phone: Go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. Grant permission to the manager to access your storage in phone settings > applications.
7 -- Run Magisk Manager, it will ask you if you want to install the zip. Select "Yes". It will now ask if you want to flash the zip or to patch a boot image, choose this last one. Point to the ramdisk img you previously copied on your phone. Magisk manager will now patch it and create a new "patched_boot.img" file. Copy this on your computer.
8 -- On your computer: Open a command prompt where you copied "patched_boot.img". Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_boot.img
fastboot reboot
9 -- Your phone will now reboot and be rooted. To unroot, repeat the process (8) with your stock ramdisk (the one extracted with Huawei Update Extractor)
Easy method​
If your build is FRD-L09C432B521 or FRD-L02C432B521, you can use these already patched ramdisk.img.
patched_RAMDISKL09B521.img
stock_RAMDISKL09B521.img
patched_RAMDISKL02B521.img thanks to @Sharath007for the file
On your computer: Open a command prompt where you downloaded "patched_RAMDISKL09B521.img" (or L02 ramdisk) .
Enter the following commands:
adb reboot bootloader (your phone will reboot in bootloader mode)
fastboot flash ramdisk patched_RAMDISKL09B521.img OR fastboot flash ramdisk patched_RAMDISKL02B521.img
fastboot reboot
Your phone will now reboot and be rooted
To unroot, repeat the process with stock ramdisk.
Click to expand...
Click to collapse
Thanks! work perfectly

freewind29 said:
Thanks! work perfectly
Click to expand...
Click to collapse
Don't quote entire op please.

Did not work on my phone (L09C432) with the "easy way".
Flashed patched ramdisk, no root, but at least still running.

daFlox said:
Did not work on my phone (L09C432) with the "easy way".
Flashed patched ramdisk, no root, but at least still running.
Click to expand...
Click to collapse
Sorry, I forgot a step. After you flashed the patched ramdisk, go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. This should work then. Please tell me if it helped.
OP edited with this new step.

Worked great here for FRD-04, one thing to add
You may have to restart your phone to be able to see the patched file via MTP in order to copy it to your PC.

macbuggo said:
Worked great here for FRD-04, one thing to add
You may have to restart your phone to be able to see the patched file via MTP in order to copy it to your PC.
Click to expand...
Click to collapse
Happy this works. Could you share the stock ramdisk and the patched ramdisk so I can add it in OP.

stephtban said:
Sorry, I forgot a step. After you flashed the patched ramdisk, go to Magisk thread (Hit the thanks button) and download the latest magisk manager. Install it. This should work then. Please tell me if it helped.
OP edited with this new step.
Click to expand...
Click to collapse
Ahhh, okay!
Will try it this evening and report tomorrow.

daFlox said:
Will try it this evening and report tomorrow.
Click to expand...
Click to collapse
Works, thanks a lot!! (additional thanks in the original post )

stephtban said:
Happy this works. Could you share the stock ramdisk and the patched ramdisk so I can add it in OP.
Click to expand...
Click to collapse
I couldn't upload to XDA directly due to 8MB limit unfortunately, here it is if you want to put it up on your google drive or something
http://s000.tinyupload.com/index.php?file_id=10562650897614852938
This is a patched image of FRD-04C567 8.0.0.520 with Magisk 17.1

macbuggo said:
I couldn't upload to XDA directly due to 8MB limit unfortunately, here it is if you want to put it up on your google drive or something
http://s000.tinyupload.com/index.php?file_id=10562650897614852938
This is a patched image of FRD-04C567 8.0.0.520 with Magisk 17.1
Click to expand...
Click to collapse
Thanks. File and credit added to OP. Do you still have stock ramdisk for easy unrooting?

Tinyupload appears to be down, these links will last for 30 days
FRD-L04C567 8.0.0.520 ramdisk patched Magisk 17.1
https://ufile.io/nsa1h
Stock L04 520 ramdisk
https://ufile.io/34eq5

macbuggo said:
Tinyupload appears to be down, these links will last for 30 days
FRD-L04C567 8.0.0.520 ramdisk patched Magisk 17.1
https://ufile.io/nsa1h
Stock L04 520 ramdisk
https://ufile.io/34eq5
Click to expand...
Click to collapse
File added. Thx.

Hallo! Is it possible to root my FRD-L09 Honor 8 Oreo this way too? And after then can I flash/install a Stock Version with Emui 5 Android 7 Nougat and then un-root again? I need my device unrooted, because of SkyGo App (Germany) doesnt work with rootet Devices ...
If theres another way to downgrade without these operations, please let me know and maybe show me the steps for that?! Thank you so much!