Unbranded 9” Android Head Unit Passcode - Android Head-Units

Hi, does anyone know the passcode to enter factory settings so I can change the start-up logo on this head unit? The eBay seller seems to think it can’t be done, but the logo is currently set to Audi.
I have tried 00000 and 123456
Thanks
App Version : Car-A300 V2.7.4.0903
Hardware : 0005-02-02-00-02-00-00
System : 2018-09-01

The Model No. is 9CPCL

Password is 688612. Not much happening in factory settings

Related

How access recovery mode RADIO OWNICE C900?

I have ownice c900 k5. But i dont know enter recovery mode, can you help me?
Access code, example:
Reset factory: 1260
car setting: 123456
developer options: 7890
where do i find recovery mode ????
I want to use 4g dongle, did you manage to root this head unit?
zayaslui said:
I have ownice c900 k5. But i dont know enter recovery mode, can you help me?
Access code, example:
Reset factory: 1260
car setting: 123456
developer options: 7890
where do i find recovery mode ????
Click to expand...
Click to collapse
try this:
open settings > in search bar, type recovery > you should see the reboot to recovery settings
ja55 said:
I want to use 4g dongle, did you manage to root this head unit?
Click to expand...
Click to collapse
If you haven't found how to root yet, you may check this post https://forum.xda-developers.com/android-auto/android-head-units/ownice-c900-k5-t4080381

Factory password not working

hello people,
juste purchased a real fake android unit (noticed after installation) on Aliexpress.
I've tried all the password found on the internet but in vain..
Anyone got a clue to get acces to the factory setup menu please ?

Junsun head unit dev setting menu code not work

Hello i have a head unit junsun v1 ... 2g 32g and 4g internet with android 9..
It is impossible to enter factory setting and développer menu..
i try all code possible ..
Before i test code 5678 and i can enter .. but i have play with security setting .. And now impossible to acess factory setting..
Do you have alternarive to acess factory setting..

Android Allwinner T3P1 easyconn need help

Hi,
I am not sure what setting i have done or after updated system firmware. The easycon no longer working. Everytime i press the app icon, it went in and immediately kick out to the main icon screen.
Another issue is after updated the system firmware, the side touch panel lighting cannot be change colour. Floating button also gone missing.
Appreciate someone can help out.
I have t3_p1 1-16 Android 10 units. I reset it to factory settings. Screen mirror no longer works at all. Even the USB Car Play Dongle is not working. Is there a hero to offer a solution?
hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.​after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Badr_ps said:
our head unit should be connected to WiFi for the MCU up
Click to expand...
Click to collapse
Badr_ps said:
hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.​after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Click to expand...
Click to collapse
Thank you very much for the detailed explanation. I will try. I will share the result here.
famepa said:
Thank you very much for the detailed explanation. I will try. I will share the result here.
Click to expand...
Click to collapse
Hello again. I tried every option but it didn't work. Unable to connect via wifi mirror or cable. I think there is a hardware problem.
No encienden las luces de los botones laterales. No conecta el bluetooh.
Hi
I have a problem with quad core t3p1 android 9. It is stuck on the logo logo. Can anyone help me how to enter its recovery mode? Thanks
I also need help with how to enter recovery mode, anyone kindly assist.

XRC xonrich HU no sound after sleep and iDrive not working (CCC bootloop)

Bought from aliexpress, and the vendor isn't helping at all...
iDrive never worked 100% (it was like stuck, system recognised its movement but it was semi locked), they gave me one firmware update that didn't solve it.
And then sound is lost after sleep. No issues with it at first (2 months).
When this is happening if you try to go to the original system its trying to boot constantly. Sometimes (after more than 20-30min with the engine on) it manages to boot and everything works.
Rebooting the HU doesn't work
Maybe the CAN BUS connection is giving issues, the workshop confirmed to me that the cables are connected properly. I've asked the vendor for a MCU update but still no answer.
Processor: UIS8581
MCU: XRC_BML220608A_8581
Versión: XRC_BMW_OS_8581_1.88
Other info i've found:
Model: uis8581a2h10_Automotive
Compilation: uis8581a2h10_Automotive-userdebug 10 QP1A.190711.020 19110 test keys
Manufacter / Brand: SPRD
CPUZ and Aida show: Android 10 Api 29
Similar problem here: https://forum.xda-developers.com/t/no-sound-after-hu-wakes-from-sleep.4464399/

Categories

Resources