Related
HI, i had no problem with Wifi. Since last time I got to the hostel and have a weak access point I have a bug with Wifi : when I activate it, it says "connecting... ". But nothing happens, it doesn't list access point around me too.
I found a way to make it work: I uncheck Wifi, check airplane mode then check wifi again. It works but I have to do it every each boot or wifi deactivation..
Is there a parameters or cache file stocking the weak ap I was trying to connect when the bug appears at first?
Thank you
Problem not solved but changer: now it work but wifi is never activated at startup.. can't force it to auto activate. Strange...
Anyone else have this problem? I just started having it, first on Phiremod 6 and now just updated to 6.3 hoping for a fix, but no dice.
I have sent back 2 nooks to BN for exchange because of this issue. I didn't know doing the airplane mode thing would temporarily fix the issue. I even did the 8 hard reset and restore and the nook would get stuck on finding wifi window - turning on wifi but nothing would happen. My nook was manualnooted 1.2. Strange?
I'm on nightly-87, Dal's 1.2GHz OC Kernel 5/23, and I'm experiencing something very similar. I went from 7.0.2 to N87 without a hitch, but I immediately started to see the WiFi icon go gray and lose it's connection. I was forced to restart WiFi as a remedy. As of today I'm getting something closer to what you're talking about; when WiFi turns on, the nook will infinity cycle through: disconnected->connecting->disconnecting->scanning. I've wiped Cache, Delvik-cache many times to no avail. Also tried re-flashing N87 and the OC Kernel, which did not work. I'm still not able to connect to my home network(netgear, WPA). But, after enabling/disabling airplane mode, I was able to connect to my LG vortex and obtain the interbuttz.
The last time I did a fresh install was around N20 something. As far as possible causes to this erratic and ethereal bug, my money is on certain update paths for both the OS and Kernel having different remnants. Example: with 87 different experimental OS installs and, to a lesser degree, the three different stable OS installs. There are technically !90 different upgrade paths. Compounded by being paralleled by kernel installs, but I believe when a kernel is updated the former is completely replaced instead of merged. I'm not calling out the Dev's, it would be nearly impossible to foresee and head-off all of the permutations of merging 87+ releases.
I'm no expert, just my two-cents. I'm not really concerned about this as a long term bug. There are fine people hard at work, and unfortunately have far more pressing issues to contend with. It's a sad reality that community driven projects, notably the nook Color, rarely reach maturity or complete/efficient hardware-software integration before the allure and newness of a product wares off.
As a consumer of .rockbox, a Linux based OS for G5.5 ipods and below, Of which I've been using for years and years. And, I would say it's just now becoming 'perfect', even with it's lack of support for many peripheral devices. I'm long term with my gadgets.
I'm rambling now.
Hope this helps to narrow down symptoms and possible causes.
It seems that my problem is a known issue of cm7 (when you click airplane it stay on forever but the checkbox remains unchecked). Try a tool from market that shown me the airplane mode and unchecked it from here. Since I didn't reboot from that test I don't know if it's solved for now.
my NC on CM7 just stopped connecting too
I turned on my NC this morning and my WiFi no longer works either.
All of my hotspots say 'not in range'.
I tried all of the tools I have to turn off 'airplane' mode (just in case it was on)
but, nothing seems to get me 'out of the mode.
What can I try next?
Wifi miraculously auto-fixed itself, and then broke itself again
fulko said:
I turned on my NC this morning and my WiFi no longer works either.
All of my hotspots say 'not in range'.
I tried all of the tools I have to turn off 'airplane' mode (just in case it was on)
but, nothing seems to get me 'out of the mode.
What can I try next?
Click to expand...
Click to collapse
While researching potential solutions... CM7 auto-fixed itself after about 15 minutes.
I didn't touch it.
All of a sudden I heard the Gmail tool beep at me with new messages and the market with a few apps updates that were available.
Now it seems to be working fine.
I spoke too soon, I just powered off and on again to see if the problem was fixed
permanently, and its not... its back to the 'not working' state.
(I hate when that happens, because I don't know what caused it, and I don't know what fixed it!)
This happened (WiFi not hearing any APs) to me a few times with nightly 87, but hasn't happened since I upgraded to n94.
fulko said:
While researching potential solutions... CM7 auto-fixed itself after about 15 minutes.
I didn't touch it.
All of a sudden I heard the Gmail tool beep at me with new messages and the market with a few apps updates that were available.
Now it seems to be working fine.
I spoke too soon, I just powered off and on again to see if the problem was fixed
permanently, and its not... its back to the 'not working' state.
(I hate when that happens, because I don't know what caused it, and I don't know what fixed it!)
Click to expand...
Click to collapse
SAME! Bump.
Same issue.....latest nightly on VG SDcard solution. Never had a problem until recently. Was runnning 7.03(flawlessly) then suddenly started experiencing the issue, flashed the latest nightly (113)...worked for a bit, rebooted and now nada..... just sits at connecting..... then goes to disconnected. Cycles every couple of minutes.....
Any suggestions on what to look at?
**** Note ; WIFI works fine when I boot to EMMC (Nook 1.2) . So I do not believe this to be a hardware problem.
I was just looking for this issue also.
I was doing great with nightlies and the OC 6/18 kernal, this morning I updated to the Nightly 114, and I received no wifi connection on booting up.
So I did all the normal things (1. turn on/off the airplane mode - No change, 2. fixed permissions - no change, 3. restarted multiple time (aft all the prior changes) - no change) Ok I thought, I will go back to my previous nights backup (Nightly 113). But I still get no wifi. The widget says trying to connect, but none of my networks are showing up within range. I run wifi analyzer and I see NO networks (normally I would see about 5 to 7 of them).
So I begin stepping back, I reinstall the Nightly 113, with No OC, and while the wifi is off on bootup, once I 'turn it on' now I see my networks.
I'm cooking with gas now, so I install the OC 6/18 - No Wifi
So I install the OC 6/13 - Still no Wifi
Both times, the Nook boots up with the wifi 'off' so I turn it on, but no connection or sensitivity.
I again reflash the Nightly 113 only and while it again boots up with wifi 'off', I am able to turn it on and it actually sees my networks.
So strange, I am stuck without my OC kernal, but as least the nook works again.
Does anyone have an idea why this is happening to people?
Thanks
onclebob said:
It seems that my problem is a known issue of cm7 (when you click airplane it stay on forever but the checkbox remains unchecked). Try a tool from market that shown me the airplane mode and unchecked it from here. Since I didn't reboot from that test I don't know if it's solved for now.
Click to expand...
Click to collapse
The issue in the OP isn't related to the one you're talking about. Try deleting one or more of your remembered wifi access points with wifi on. Let it rescan and, if it's not some other issue, it should find your access points and connect.
Suffering this same issue as well on my Nook Color. I believe the problem lies under /data, and here's why. First, I made a backup of /data, and then wiped everything:
* I restored my device to factory 1.2: Wifi works
* I flashed CM7 nightly 113: Wifi works
* I flashed dalingrin's OC'd 6/18 kernel: Wifi works
* I restored /data from my backup: Wifi is stuck at "Connecting..."
I thought it might have something to do with the settings.db file under /data/data/com.android.providers.settings/databases/, but when I deleted that file and rebooted, it made no difference with the Wifi problem.
Something under /data might have a problem with the latest CM7 builds, but I couldn't say what exactly. I'm not an expert at this stuff, so I can only share what I've observed and tried for myself.
Hi. I have the same problems with Wifi since this morning. Is there any other solution then turning on and off airplane mode? thx
Formatted /system and /cache, and wiped the Dalvick cache, then flashed only CM7 nightly 143.
The problem still exists. Wifi is stuck at "Connecting..." Has anyone found a solution to this? It's obviously something to do with a setting/file under /data, because if I format /data, Wifi works like normal. But when I restore my backed up /data, Wifi is stuck at "Connecting..."
I think I found a solution. This worked for me, so I hope it works for others.
Shortly after writing my previous post above, I decided to play around with my NookColor, to see if I could get the Wifi to work normally again. Here's what I did, which fixed the "stuck at connecting" problem for me:
1) Go to Settings > Wireless & networks > Wi-Fi settings
2) Check to enable Wi-Fi, if it's not already enabled
3) Click every wireless network in your list and choose "Forget"
4) Make sure every wireless network is forgotten
5) Check to disable Wi-Fi
6) Check to re-enable Wi-Fi
Instead of "Connecting..." I now see "Scanning" and it picks up the routers around me! I selected my router, and it connected! I am now able to browse the web, update my apps, and all seems to be working normally now!
You can also watch if airplane mode is really off using Android assistant:
https://market.android.com/details?id=com.advancedprocessmanager&feature=search_result
it helped me with this problem
flansuse said:
I think I found a solution. This worked for me, so I hope it works for others.
Shortly after writing my previous post above, I decided to play around with my NookColor, to see if I could get the Wifi to work normally again. Here's what I did, which fixed the "stuck at connecting" problem for me:
1) Go to Settings > Wireless & networks > Wi-Fi settings
2) Check to enable Wi-Fi, if it's not already enabled
3) Click every wireless network in your list and choose "Forget"
4) Make sure every wireless network is forgotten
5) Check to disable Wi-Fi
6) Check to re-enable Wi-Fi
Instead of "Connecting..." I now see "Scanning" and it picks up the routers around me! I selected my router, and it connected! I am now able to browse the web, update my apps, and all seems to be working normally now!
Click to expand...
Click to collapse
That worked for me, thanks a ton!
flansuse said:
I think I found a solution. This worked for me, so I hope it works for others.
Shortly after writing my previous post above, I decided to play around with my NookColor, to see if I could get the Wifi to work normally again. Here's what I did, which fixed the "stuck at connecting" problem for me:
1) Go to Settings > Wireless & networks > Wi-Fi settings
2) Check to enable Wi-Fi, if it's not already enabled
3) Click every wireless network in your list and choose "Forget"
4) Make sure every wireless network is forgotten
5) Check to disable Wi-Fi
6) Check to re-enable Wi-Fi
Instead of "Connecting..." I now see "Scanning" and it picks up the routers around me! I selected my router, and it connected! I am now able to browse the web, update my apps, and all seems to be working normally now!
Click to expand...
Click to collapse
Man, you really had my hopes up with this one. You're the first person I've seen say every remembered network needs to be forgotten. But I followed your steps exactly, and my NC still will not connect. It sees all wireless networks available. It knows which ones are open and which ones are secured. I can go so far as to enter the password and click Connect. It says "Obtaining IP address from...", then quickly flashes "Unsuccessful", then "Scanning...", then loops indefinitely. I even took your steps one step further and rebooted before turning WiFi back on. Still doesn't work.
This is the fourth time this has happened to me. And every time, the only way I've been able to fix it is to completely reinstall CM7. That's not a fix, that's a wrecking ball. I'm pretty desperate to find a fix because my NookColor has become a joke, almost unusable. Right when I get it to the point of enjoying it and getting it set up just the way I want it, this happens. And the damn thing is useless without WiFi.
I also installed the latest nightly build, which was from last night. Nothing.
Guys,
I updated my tab a few days ago. Now the market looks different but unfortunately I'm facing another irritating problem which I have no clue how to solve.
Every time that I turn off the tab, and let it be idle for 10 minutes, when I turn it back on, the WiFi icon will show no bars - which translates into no internet connectivity. That happens while the WiFi button is still pressed (green in the pop-up menu). In order for the device to connect to the net I need to turn the WiFi OFF and than ON and it works.
I checked the WiFi sleep configuration and they are set to "never turn it off" I also rebooted the device but with no change.
Please let me know what to do... as this thing sometimes just drives me crazy.
Thanks.
Gingi
imgingi said:
Guys,
I updated my tab a few days ago. Now the market looks different but unfortunately I'm facing another irritating problem which I have no clue how to solve.
Every time that I turn off the tab, and let it be idle for 10 minutes, when I turn it back on, the WiFi icon will show no bars - which translates into no internet connectivity. That happens while the WiFi button is still pressed (green in the pop-up menu). In order for the device to connect to the net I need to turn the WiFi OFF and than ON and it works.
I checked the WiFi sleep configuration and they are set to "never turn it off" I also rebooted the device but with no change.
Please let me know what to do... as this thing sometimes just drives me crazy.
Thanks.
Gingi
Click to expand...
Click to collapse
Flash a custom rom bro. Otherwise you are stuck with Samsung's awesome bugs. If you don't want to flash a custom rom there isn't really much you can do about it considering you're not rooted. What did you update to? KMP???
I did the regular Samsung update -the latest one that was released a couple of says ago. The problem with rooting is losing the coverage I have for insuring the device... which I'm reluctant to do. I'm sure it has a solution somewhere...
Yes I confirm.
This "reconnect" issue is being discussed on many forums with no solutions yet. (except custom ROM)
I had CM11 on my Nexus 4 and did a full wipe, then flashed the official Lollipop image (using flash-all.sh script). The process went smooth, without any problems.
Now, I am having WiFi issues. When I turn on WiFi from quick settings it changes the icon, but doesn't connect to the network yet. If I try to access WiFi settings it opens them up, but I can see only the actionbar and a blank white screen. No networks shown. Sometimes I even get "The app is not responding dialog". It sits like this for about 30-60 seconds and after that it connects to the network and I am able to access WiFi settings.
Sometimes I can't turn WiFi on at all. Quick settings don't change the WiFi icon to the ON state. If I try to turn it on from the Settings, the switch does literally nothing - not even "Turning WiFi on..." shows up.
I tried to reflash the system - still get these issues. Tried reflashing just the radio module - didn't fix it. No idea what to do. KitKat worked just fine.
Does anyone else have similar problems?
Same issues, but on a Nexus 10.
I have exactly the same issues as you, but on a Nexus 10. Running LRX21P 5.0 Lollipop.
+1
I used Wugfresh 1.9.6
Downloaded and installed LRX21T
Did a complete wipe (cache and factory reset)
Did a selective restore of ~75 apps from Google backup
Played with the machine for hours.
Rebooted, now got no wifi
Anyone suggest a workaround?
EDIT: I came across this post in the Nexus 5 Thread , where he suggests changing your router's channel to something below 12. I changed mine from 13 to 8 and now wifi seems to be working.
EDIT2: Sadly the above was a red herring. The problem seems more complex. Hopefully Google will release a fix soon
fangthorn said:
+1
I used Wugfresh 1.9.6
Downloaded and installed LRX21T
Did a complete wipe (cache and factory reset)
Did a selective restore of ~75 apps from Google backup
Played with the machine for hours.
Rebooted, now got no wifi
Anyone suggest a workaround?
EDIT: I came across this post in the Nexus 5 Thread , where he suggests changing your router's channel to something below 12. I changed mine from 13 to 8 and now wifi seems to be working.
Click to expand...
Click to collapse
I don't think my problem depends on the available WiFi networks. But thanks for the response.
I have the exact same issues, Wifi doesn't turn on at all. It doesn't matter if I press the quick settings button or the button in the menu. It says Wifi on, but nothing happens. After the screen goes dark, Wifi turned itself off again.
Any suggestions? Thank you!
the.best77 said:
I have the exact same issues, Wifi doesn't turn on at all. It doesn't matter if I press the quick settings button or the button in the menu. It says Wifi on, but nothing happens. After the screen goes dark, Wifi turned itself off again.
Any suggestions? Thank you!
Click to expand...
Click to collapse
I'm having the exact same issue. Wiped with ADB and flashed LRX21T factory image from Google's website. No error codes during flash.
Wifi is great - if you leave it on all the time. As soon as it turns off, it will NOT turn on. I get no error message, no timeout like it usually does when Wifi isn't working properly, no crash report. Nothing. Just a stalled Wifi acting like it's turning on. If I exit Wifi settings page, and come back, it shows as being off. Turn it on, and it just hangs the same way.
So frustrating.
It's for sure not the network I'm on, as it also doesn't turn on when I'm not near Wifi, or when I'm at a friend's house. Rebooting the phones makes the Wifi work again...until it turns off for ANY reason. Then we're back at square 1.
I'm having this same issue...
My WiFi seems to turn itself off. Then there is no way I can get it to turn back on unless I reboot the phone.
Very frustrating.
I have the same issue.I sideloaded the OTA and everything went great,no errors during the installation.I was on stock 4.4.4.
When I turn on the Wifi it takes around 30 sec to connect to a network.If i click on the Wifi menu in the setting it usually freezes or I get a black screen.After that Wifi works fine,but another thing I noticed it doesn't remember new networks.I don't know if a factory reset would help...
Anyone find a solution yet? Did a factory reset eliminate the problem for somebody?
I got the same thing. Currently, I'm using Power Toggles to do the on/off setting.
NathanGong said:
I got the same thing. Currently, I'm using Power Toggles to do the on/off setting.
Click to expand...
Click to collapse
Are you saying that Power Toggles fix the problem?
I'm facing a different issue. Whether I have WiFi on or off, it always appears active in the battery usage stats ('scanning always available' is off)
WiFi was off when the screen was off from about 3 am to 2 pm.
Sent from my Nexus 4
I am having the same issue. very frustrating. it was working perfectly last night on my home network, but now it wont connect to my work network. it has the same issues as everyone else. the wifi toggle will turn on, but it will not show any networks. then after a couple of seconds it will turn itself off.
^^i am having that issue as well. the battery usage stat page is showing wifi as on even though it is off.
Have the same issue. After some standby time, turning Wifi on again, it showed me networks where I am not close to anymore and didn't show me the actual networks where I am right now. This seems to be a serious bug that needs fixing. I don't want to reboot my phone to fix it. Didn't Google delayed the Lollipop-Update because of some Wifi issues?
I have all the symptoms listed in this thread. I filed a bug report too: https://code.google.com/p/android/issues/detail?id=80028&q=LRX21T
Found this thread when this problem popped up for me after flashing the factory images one by one. Might try to find a source-built ROM using a later version to see if it got fixed.
quarara said:
I have all the symptoms listed in this thread. I filed a bug report too: https://code.google.com/p/android/issues/detail?id=80028&q=LRX21T
Click to expand...
Click to collapse
Thanks for making the bug report. I've added some details to it.
Ibrahim.Rahman said:
I'm facing a different issue. Whether I have WiFi on or off, it always appears active in the battery usage stats ('scanning always available' is off)
WiFi was off when the screen was off from about 3 am to 2 pm.
Sent from my Nexus 4
Click to expand...
Click to collapse
I have this problem too, in battery status wifi always show on even I turn on or off. It not happen with Kitkat.
anezarati said:
^^i am having that issue as well. the battery usage stat page is showing wifi as on even though it is off.
Click to expand...
Click to collapse
dinhvandinhtu said:
I have this problem too, in battery status wifi always show on even I turn on or off. It not happen with Kitkat.
Click to expand...
Click to collapse
Nice to know I'm not alone in this. Hope it gets fixed soon
Sent from my Nexus 4
when turning my wifi off it seems it goes into some weird loop of turning on and off constantly by itself, it doesn't seem to be trying to connect just flipping the wifi switch on and off none stop.
noticed it because i had a huge battery daring overnight and while trying to fix it i saw the switch going off and on all the time.
when turning it back on it seems to connect normally .
did a network setting rest but it did nothing ...
I'm guessing a factory rest will fix the problem but I'm hoping to avoid such a overkill solution :crying:
does anyone else had this problem and can help me fix it?
thanx!
avivzamir said:
when turning my wifi off it seems it goes into some weird loop of turning on and off constantly by itself, it doesn't seem to be trying to connect just flipping the wifi switch on and off none stop.
noticed it because i had a huge battery daring overnight and while trying to fix it i saw the switch going off and on all the time.
when turning it back on it seems to connect normally .
did a network setting rest but it did nothing ...
I'm guessing a factory rest will fix the problem but I'm hoping to avoid such a overkill solution :crying:
does anyone else had this problem and can help me fix it?
thanx!
Click to expand...
Click to collapse
This was on a new custom rom ?
Or did it just happend on a rom that have worked perfect for days?
And have you seen which app or system app been casuing the drain?
LyLu said:
This was on a new custom rom ?
Or did it just happend on a rom that have worked perfect for days?
And have you seen which app or system app been casuing the drain?
Click to expand...
Click to collapse
original samsung rom.
just happened (i have the device for a a while everything was fine) its the android system that drains the battery in the battery status.
when i leave the wifi on it stops and works fine ...
Have you turned off ''Keep Wifi During Sleep''? I know this can drain battery.
It's not so easy to troubleshoot on an orginal none rooted phone.
You can try clearing dalvik and cache.
Turn it off and then on holding power and vol down button, then clear cach/dalvik and restart.
Try uninstall update beaming service for samsung then restart
If still persistent try uninstall update microsoft onedrive and skype then restart, just in case
I found it after factory reset (forgot internal data backup :crying and update all apps, this problem occuring after the last 3 updates (beaming, onedrive, & skype) which more suspect beaming service update make that problem
Your not alone
You're not the only one who suffer from this exact problem, on Friday or Saturday the same problem started occurring with my phone too, WiFi turns on and off in a loop and huge battery drain!
I saw an increase of 6% of battery drain per hour, so I ended up on 9% total drain every hour. :crying:
I have original Samsung Rom and phone worked prefect until now, no settings or apps installed before this happened either.
What rom version are you guys on?
I'm having the same issue. However, I'm on PhoenixX Rom. Major battery killer and has only just started happening within the past few days.
Since my phone has been unplugged, 3 hours ago, looking at BetterBatteryStats, It is showing com.google.android.gms as having quite a LOT of wakeups. 40 per hour (everything else is about 2). Don't know if this is normal as I don't remember it before the Wifi issue.
Looking into what the wake ups are caused from, Location and heartbeat were the major culprits. So i have turned of WIFI scanning when not on and also the body sensors for Google Play. We shall see.
LyLu said:
What rom version are you guys on?
Click to expand...
Click to collapse
See attachment.
Easy fix. Just disable Wi-Fi scanning.
the_scotsman said:
Easy fix. Just disable Wi-Fi scanning.
Click to expand...
Click to collapse
its not a fix at all . it dosnt scan for wifi , just turning it on and off non stop.
like pressing the light switch agin and agin
I had this after installing "GoodLock" software from Samsung! Uninstalled and everything is ok
same here, just noticed I wasnt on Wifi and the switch is just flicking on and off by itself. Standard S7 with all the updates installed
Been struggling with the same for some days (4 - 5) I haven't been able to get exactly whats triggering this. I'm on stock rom with root. I've reinstalled firmware clean again and re downloaded my apps but it is still happening randomly. Some times after a few attempts to switch wifi on (even when it is toggling by itself) it manages to keep on. Sometimes restarting makes it work again. One thing I'm almost certain its that this usually happens after I turn wifi OFF and then try to turn it back on.
It's been crazy and the phone starts to overheat after a while off this on-off loop.
Any ideas?
its very wierd it started to all of us in the past few days-weeks . seems like samsung has a bug they need to hurry up and fix.
AT&T just pushed out the October Security update for the S7 family, I'm guessing something that came along with it is creating the problem.
mine did a software update last week and I've been away in airplane mode so it could have started then. I've just disabled scanning and that seems to have got round the issue and I'm now connected to WifI
I'm not sure whether it is a Samsung Issue or a Third party one... It is true that something recently affected all of us, but as far as I know, it could be a third party app that wasn't well developed for our phone.
I've noticed the same problem on my phone and it's also only started up in the last few days. On stock Sammy rom, unrooted. Will be monitoring this thread to see if the experts here can narrow down the culprit.
I had the same issue and I was able to stop the toggle by turning off the wifi scanning in Location - Improve Accuracy - WiFi scanning. It's a fix for now. I think it may be an app that may have been updates that is persistently looking for location updates.
I have seen this issue when searching the interwebs, but only solution I keep seeing is adjusting battery optimization, which has not worked for me.
I have a stock Note 8, that at random when plugged into Android Auto, I get searching for GPS. Maps does not work nor Waze.
They both work fine without Android Auto.
Figured I would check here to see if anyone is aware of this issue and knows of another solution?
I tried adjusting battery optimization as well with no success. Toggling Location in Quick Settings seems to work temporarily, as does starting Google Maps. But today, I switched battery performance to High, and I didn't have any issues. I'm going to dig deeper into the battery optimization settings because I suspect the answer is there.
The only way I can get mine to work reliably is flash back to dta5. Any updates past that give me gps issues in android auto. I tried the latest att update, same issue, going to tough it out till my 20 arrives. I can unplug wait a minute and plug it back in to get the gps working.