[SOLVED]"No Command" error in recovery mode after flashing TWRP via ADB - Moto G5 Plus Questions & Answers

What i did stepwise -
1. Unlocked bootloader of my g5 plus
2. Flashed twrp-3.2.3-1-potter.img via adb
3. Booted to TWRP
4. Wiped to decrypt phone
5*. Booted to system to enable usb debugging, enabled it . Transfered magisk , arrow 9.0 rom , gapps to my internal storage of phone
6. Open bootloader , selected recovery mode and got nothing except error "No Command"
So i cannot flashed anything what i wanted to
What and Where i made the mistake ?
How can i get TWRP back?
Thanks all in advance
Solution
1. Flashed magisk17.1 and lazyflasher
2. Updated magisk manager and got root
3. Installed official TWRP app , granted root and downloaded same TWRP.img from which i decrypted the phone.
4. Flashed twrp fom the official twrp app.
5. No irritating No Command error again

The no command screen is that of the stock recovery (that's a normal screen). From your steps, it seems like you booted to system in step 5 rather than back to recovery. It seems that after flashing TWRP, you may have to boot to recovery to fix TWRP as your recovery (else the stock recovery overwrites TWRP). Afterwards, you should be able to boot as normal with TWRP still present.
Easiest way to recover would be to repeat step 2 and 3. Then reboot to recovery in TWRP and that should retain TWRP. Back up your existing system, then flash the ROM, GApps and magisk as desired.

echo92 said:
The no command screen is that of the stock recovery (that's a normal screen). From your steps, it seems like you booted to system in step 5 rather than back to recovery. It seems that after flashing TWRP, you may have to boot to recovery to fix TWRP as your recovery (else the stock recovery overwrites TWRP). Afterwards, you should be able to boot as normal with TWRP still present.
Easiest way to recover would be to repeat step 2 and 3. Then reboot to recovery in TWRP and that should retain TWRP. Back up your existing system, then flash the ROM, GApps and magisk as desired.
Click to expand...
Click to collapse
Thanks for your answer sir , but it didn't work
What I did again
1.I flashed same twrp from adb
2. Booted to recovery , but this time TWRP didn't asked password and I could see internal storage in twrp but not on my PC
3*.However I took the whole backup of stock nougat and cross check from restore option as there was backup in TWRP folder. I wanted copy that backup to my PC . But PC cannot detect my phone while in recovery
4. So booted to system and my PC detected my phone but there was no backup in TWRP folder.( But around 6gb(backup) of storage was used but I couldn't see it)
5.Again booted to recovery mode but "No Command" showed again .
I tried several times but I keep losing TWRP and couldn't see the backup which I make

Same problem. Resolved by flashing alternately several times twrp-3.2.1-0-potter.img and twrp-3.2.1-1-potter_persist.img and finally updated twrp-3.2.3-1-potter.img

It's because of dm-verity. You have to flash something like magisk or a custom kernel that disables it *before* you reboot into stock.

NZedPred said:
It's because of dm-verity. You have to flash something like magisk or a custom kernel that disables it *before* you reboot into stock.
Click to expand...
Click to collapse
I flashed magisk 17.1 and lazyflasher ,i got magisk and root but cannot install modules may be becoz of f2fs bug . By the way i lost twrp after booting to system again and No command still present in recovery mode . I am frustrated Moto software is just pain in head :silly:

Related

How do I fix bootloop after flashing SuperSU with TWRP? (Samsung Galaxy Tab A (2016))

1. Used Odin tool to flash twrp onto tablet
2. Selected "INSTALL" and flashed the supersu file onto device
3. Hit reboot after being prompted to
Device has been stuck in bootloop ever since
EDIT: It kept rebooting all night, I let battery run out
- It now wouldnt open at all (bricked?)
Did you decrypt your data partition? if not re-install, decrypt data partition before installing supersu

HELP! Phone won't boot from twrp!

I've unlocked the bootloader, flashed twrp from pc and I was going to flash the supersu zip. Unfortunately, when I went in recovery (twrp) and flashed the supersu zip(installation process didn't show any problem) I clicked reboot and the phone didn't boot! It just turns off(no led or similar). I have fastboot and twrp access, I tried flashing omnirom using the adb sideload command, everything went fine but still when pressing reboot nothing happens! I even tried to boot manually (after flashing the ROM) with the physical button but still nothing(this time the led blinked twice).
I used the latest version of twrp for Athene, version 2.82 of supersu if this could help.
Edit: was it necessary to flash a different kernel, as it was a nougat rom? The rooting guide I followed didn't mention that.
Edit: Everything worked fine before Supersu, the problem must be related to Supersu but how can I solve?

Issue with unlocked bootloader

Hey,
I had AOSP rom and i decided to go back to OOS. (xXx rom)
I entered TWRP, Cleaned Data,Cache,Dalvik,System.
And Factory reseted it.
Installed the xXx rom, and i got on the splash screen instead of "Bootloader Unlocked"
And i'm getting "<!>"
And i couldn't boot.
And i can't press volume keys to get to recovery or bootloader, but it boots straight to bootloader.
i entered to TWRP again (Via bootloader), reflashed stock OOS.
It booted, and then i entered bootloader to flash TWRP again, and it didn't succeeded
I enter only Stock Recovery and every time i try to flash Recovery it's succeed but it's does nothing, still entering Stock OOS recovery.
Now i stuck at stock OOS, and stock rocevery.
Can't flash anything.
Can someone tell me what to do?
Best is via ADB flashing latest BlueSpark TWRP (fastboot devices, fastboot flash recovery (name of TWRP).img and then format all so you start with a clean plate. Then move your ROM from PC to Internal and proceed further. But IMO a "format" is needed. Also siakantabg made a flashable zip from the old bootloader. Flash this zip in TWRP first after formatting en wiping everything.
Link old bootloader: https://forum.xda-developers.com/oneplus-5/themes/mod-bootloader-changer-t3800862

How To Get Rid Of "Keep Booting Into TWRP Recovery After Flashing Rom"

Today i flashed the pixel plus (July 17) rom through TWRP recovery. Unfortunately i didnt backup the data as i have flashed pixel rom before and it worked fine. So after finishing the installation every time i reboot it kept rebooting into TWRP recovery. I tried flashing the other pixel rom but the result is same.
in my case, I did fix this way.
1. flash TWRP
2. boot recovery (TWRP) 1st
3. use TWRP flash TWRP again ←
4. boot recovery (TWRP) again
5. flash ROM.
※ I recommend flash orange fox (step 3). Because sometime TWRP have problem which password lock - not match password etc., - when start Android OS.
dhampire said:
in my case, I did fix this way.
1. flash TWRP
2. boot recovery (TWRP) 1st
3. use TWRP flash TWRP again ←
4. boot recovery (TWRP) again
5. flash ROM.
※ I recommend flash orange fox (step 3). Because sometime TWRP have problem which password lock - not match password etc., - when start Android OS.
Click to expand...
Click to collapse
Do you have the TWRP? I can't find it on the main thread. Seems those files are removed!

Mi A1 Recovery issue

please help here
1. i have unlocked bootloader
2. treble partition by using COSMIC DAN recovery.
3. i am able to boot any twrp by fastboot......... but when it comes to install twrp by zip file using hotboot twrp method........... i reboot into recovery........... my phone goes to blank screen {adb access} rather than TWRP----------bootloop--------
daTA CANNOT be selected{see image}-------failed to mount data in twrp
4. unable to boot into recovery by using {pressing} Buttons
5. also tried flashing Stock ROM {android 9 latest}
6. i have tried it with every available recovery but SAME REsult..

Categories

Resources