Database Users

LG L3-E400 boot/brick problem

Hello i'm new to forum and need help for LG L3-E400 bricked phone.I had installed some 4.42 version ROM , after that i installed 4.04 stable (i forgot name) and it worked well while i had installed sa andreas and some games , and tried to expand his memory to 16 gb ( From video on youtube) and messed up with kernel (processor MHz-s).
I have tried many times with KDZ way , downloaded Europe firmware because i'm from Bosnia and from main site there is no firmware for Bosnia , tried flashing (3GQVCT-DIAG) , goes to 99% and got error Wparam 100 Lparam 6 , phone reboots and same thing happens LG LOGO / WHITESCREEN LG LOGO / WHITESCREEN. (EMERGENCY MODE WORKS)
I have installed LG mobile united drivers , some LGE AndroidNET modem drivers but my main drivers (Mass storage / LG USB E400) wont install because my phone always reboots. My device manager is always refreshed , tried also LG PC Suite but it dont recognize it ,LG Support Tool , also gets Error while upgrading.
Tried something like Offline KDZ but it wont do it or i have done something wrong (same error repeats Wparam 100 Lparam 6) , i had heard something about ADB but dont know how to use it.Tried also HARD RESET but its stuck in LG LOGO
So if someone knows how to repair pls tell me i'm desperate (

Stella Rossa said:
tried to expand his memory to 16 gb ( From video on youtube)
Click to expand...
Click to collapse
Will you please provide a link to that video so it'll be more clear?
Stella Rossa said:
downloaded Europe firmware because i'm from Bosnia and from main site there is no firmware for Bosnia
Click to expand...
Click to collapse
Do you have you device's details (the ones who are under settings --> about phone) like model number, baseband version, kernel version, build date and build number?
(I know that you can't access that menu, but maybe you wrote it somewhere?)
Stella Rossa said:
I have installed LG mobile united drivers , some LGE AndroidNET modem drivers but my main drivers (Mass storage / LG USB E400) wont install because my phone always reboots. My device manager is always refreshed , tried also LG PC Suite but it dont recognize it ,LG Support Tool , also gets Error while upgrading.
Click to expand...
Click to collapse
I think it'll be a good idea to remove everything you installed, and install only the latest official drivers from here. (You might want to change the region in the bottom of this page)
Please also verify that your KDZ-Flasher is version 1.0.4.4 or later (if there is a newer version).
If not, download it from here.
Stella Rossa said:
Tried something like Offline KDZ but it wont do it or i have done something wrong (same error repeats Wparam 100 Lparam 6)
Click to expand...
Click to collapse
I always have this error. I think until Wparam 200 if I remember right (yeah - 100 error lines!).
I just wait until it's finished, and then let the magic happen - the phone reboots to my stock version, and the KDZ application is crashing (but it's okay...).
Stella Rossa said:
So if someone knows how to repair pls tell me i'm desperate (
Click to expand...
Click to collapse
Don't be.
You are in a good community.
Just be as clear as possible, and provide as much information as you can so we'll be able o help you in the best way.
BTW, because I don't have this device anymore, I give you what I can from my memory and from what I have in my computer.
Nevertheless, I'll do my best to help you out.

I will post link later , now im going to uninstall drivers , dont know device details , downloaded new KDZ from your link , will try it soon as possible.Tnx

Stella Rossa said:
I will post link later , now im going to uninstall drivers , dont know device details , downloaded new KDZ from your link , will try it soon as possible.Tnx
Click to expand...
Click to collapse
Here it is its name because i cant copy link
Memoria Interna LG L3 16 GB Tutorial ITA

Stella Rossa said:
Here it is its name because i cant copy link
Memoria Interna LG L3 16 GB Tutorial ITA
Click to expand...
Click to collapse
Thanks!
Where are you standing with this problem?
Did you try again to re-flash stock version with KDZ-flasher?

need4steer said:
Thanks!
Where are you standing with this problem?
Did you try again to re-flash stock version with KDZ-flasher?
Click to expand...
Click to collapse
I will try again today with KDZ and drivers from links above.

I have tried again but fail , recorded a video of updating so it will be on youtube that u can watch what happens,today will upload.

Stella Rossa said:
I have tried again but fail , recorded a video of updating so it will be on youtube that u can watch what happens,today will upload.
Click to expand...
Click to collapse
Thanks!
I'll be waiting for this video.

need4steer said:
Thanks!
I'll be waiting for this video.
Click to expand...
Click to collapse
Here it is , go to SystemizeR87 channel on Youtube because i cant post link here.

Stella Rossa said:
Here it is , go to SystemizeR87 channel on Youtube because i cant post link here.
Click to expand...
Click to collapse
First, I'll post it for you so others will be able to watch it easily:
Will you please try to flash my stock firmware - V10F_00
No need to record another video.
I just want to see if it's firmware dependent.
BTW, you wrote:
Stella Rossa said:
My device manager is always refreshed
Click to expand...
Click to collapse
What do you mean?
Are you now only with the newest drivers from the link I gave you?
Do you have any exclamation mark in the device manager?
Did you try using another USB port (preferably one that is connected to your motherboard and not to your chassis)?

need4steer said:
First, I'll post it for you so others will be able to watch it easily:
Will you please try to flash my stock firmware - V10F_00
No need to record another video.
I just want to see if it's firmware dependent.
BTW, you wrote:
What do you mean?
Are you now only with the newest drivers from the link I gave you?
Do you have any exclamation mark in the device manager?
Did you try using another USB port (preferably one that is connected to your motherboard and not to your chassis)?
Click to expand...
Click to collapse
Will try this firmware now , drivers installed froom your links , tried 2 USB ports as i have them , in device manager just refreshes , rare using direct connection with case , because i have a USB cable extension , so its easily to connect
Tried first time and when he going to reboot , i went to device manager and its one exclamation mark.WHen he refreshes mark is in Storage volumes/Generic volume
There are 2 generic volumes and when phone reboots , third one is blinking with mark as phone restarts fast.
is there any way to install recovery or custom kernel maybe it is the problem ??

Stella Rossa said:
Will try this firmware now , drivers installed froom your links , tried 2 USB ports as i have them , in device manager just refreshes , rare using direct connection with case , because i have a USB cable extension , so its easily to connect
Tried first time and when he going to reboot , i went to device manager and its one exclamation mark.WHen he refreshes mark is in Storage volumes/Generic volume
There are 2 generic volumes and when phone reboots , third one is blinking with mark as phone restarts fast.
is there any way to install recovery or custom kernel maybe it is the problem ??
Click to expand...
Click to collapse
I didn't understand if you're connecting your phone directly to your motherboard without any cable extension.
If you don't - please do.
Then please enter emergency mode, and only then look on the device manager.
What do you see? Is everything okay, or you're having an exclamation / question mark?
If everything is okay, only then continue to flash the stock firmware.

need4steer said:
I didn't understand if you're connecting your phone directly to your motherboard without any cable extension.
If you don't - please do.
Then please enter emergency mode, and only then look on the device manager.
What do you see? Is everything okay, or you're having an exclamation / question mark?
If everything is okay, only then continue to flash the stock firmware.
Click to expand...
Click to collapse
How do u mean motherboard , in USB port , i have them 2 in behind of case ?
I will try them now.

Stella Rossa said:
How do u mean motherboard , in USB port , i have them 2 in behind of case ?
I will try them now.
Click to expand...
Click to collapse
Not working , same error , noticed that your firmware installs slower than others , anyway here is log if u need it.
http://www.sendspace.com/file/0trn0l

Stella Rossa said:
How do u mean motherboard , in USB port , i have them 2 in behind of case ?
I will try them now.
Click to expand...
Click to collapse
Yeah, exactly these 2 ports. Try one of these.
Then enter emergency mode, and then look at the device manager.
If everything is okay (you have no exclamation / question marks) continue to flash the stock firmware with KDZ-flasher.
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
Stella Rossa said:
Not working , same error , noticed that your firmware installs slower than others , anyway here is log if u need it.
http://www.sendspace.com/file/0trn0l
Click to expand...
Click to collapse
Okay, what about the device manager?

need4steer said:
Yeah, exactly these 2 ports. Try one of these.
Then enter emergency mode, and then look at the device manager.
If everything is okay (you have no exclamation / question marks) continue to flash the stock firmware with KDZ-flasher.
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
Okay, what about the device manager?
Click to expand...
Click to collapse
Device manager is OK n exclamation marks.

try this
Stella Rossa said:
e400.
Click to expand...
Click to collapse
considering device manager is ok now you can skip removing anything related to lg, if not do so and download lg mobile support tool
1 plug phone in normal (lg) mode
2 run lg mobile support tool
3 select recovery upgrade from options in top right
4 type your imei to according box (*#06# to get it)
and start upgrade
it will download the newest available kdz for your model and flash it
and even if you get error near the end it should give you your phone back like from factory
you might need to repeat process couple of times but it WILL work

Stella Rossa said:
Device manager is OK n exclamation marks.
Click to expand...
Click to collapse
The drivers are okay, the software is okay, the stock firmware is okay - so it's only your phone / your cable / your computer.
The next thing is to try to connect your phone with another cable, or the same cable to another computer.
IGGYVIP said:
considering device manager is ok now you can skip removing anything related to lg, if not do so and download lg mobile support tool
1 plug phone in normal (lg) mode
2 run lg mobile support tool
3 select recovery upgrade from options in top right
4 type your imei to according box (*#06# to get it)
and start upgrade
it will download the newest available kdz for your model and flash it
and even if you get error near the end it should give you your phone back like from factory
you might need to repeat process couple of times but it WILL work
Click to expand...
Click to collapse
There's no normal mode for him. He is in a boot loop...

need4steer said:
The drivers are okay, the software is okay, the stock firmware is okay - so it's only your phone / your cable / your computer.
The next thing is to try to connect your phone with another cable, or the same cable to another computer.
There's no normal mode for him. He is in a boot loop...
Click to expand...
Click to collapse
@Stella Rossa did you try booting in safe mode i belive its same as e430 UP+DOWN+HOME (full boot) POWER (6 sec.)
otherwise if no access to what he said you google resetting all usb ports in your system it helped me once with bad flashes

IGGYVIP said:
@Stella Rossa did you try booting in safe mode i belive its same as e430 UP+DOWN+HOME (full boot) POWER (6 sec.)
otherwise if no access to what he said you google resetting all usb ports in your system it helped me once with bad flashes
Click to expand...
Click to collapse
I had taken phone to LG service , thank u all for helping me and keep up good work.

[Q] Huawei E5372s-32 stuck on boot after wrong firmware

Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks

That Simply means there is an error on the phone software, Update it and it'l be 5n

Unfortunately XDA is not the right place to talk about MiFi Routers. So although there are millions of members here, very few will find your post, and very few of those who do will be able to help you. So you will probably have much better success in places like the GSM-Forums website.

thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi

Please alaa i have same a problem with huawei E5372 , but when i update nothing comining only huawei logo freeze
الله يا خليك يا عم علاء عندي نفس المكلة و كل لما اعملها مش بترضى و الججهاز بيعلق ممكن حل

alaa2003 said:
Hello
i need help to back my E5372s-32 which stuck on boot and give me logo of Huawei
after connect it to my PC cannot feel with modem
i tried to enter ' Force download " mode to firmware it using (power+Menu) buttons during turn on but i could see it for less 1 second
i could get manual for the device may help
http://www.mediafire.com/download/f...aintenance+Manual+Basic+Version+V1.2.rar.html
thanks
Click to expand...
Click to collapse
I know I may be a little too late but I found the solution to this. I was stuck on the FTM screen but THIS firmware solved it. It is really easy. Try it out and tell me how it goes. All the best.

Dear i have the same problem. with my sts huawei router. Could you please tell us the whole procedure how you did it? like from the start how to install driver how to flash with full links how to move my device into download mode to detect it with computer and make installation which tools needed. Thnx in Advance.

have you solved the problem ??

Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable R215MobileWifiFirmware_v3.1.hmf.
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work

searching R215MobileWifiFirmware_v3.1.hmf
Hgall8 said:
Ok, so I'll try to make this short, this is how I fixed the logo bootloop.
I basically flashed a wrong firmware and the device was rendered unusable(stuck at logo).
First of all u need to use "Huawei Vodafone R215 – E5372 Flasher by fr3nsis" u can google it.
U need to find the right .hmf firmware to flash with fr3nsis.
The only one that I found and worked was "R215MobileWifiFirmware_v3.1"
it contains 13 files .bin and the flashable .
You also need R215MobileWifiFirmware_v3.1.exe
After getting the files u need to put the device in download mode,
take the battery out and put it back, press and hold menu and power until some text appears(1 second),
right when the text appears press menu and it should get you into download mode.
Now u can use the the flasher tool to flash the firmware. after a few seconds, it should say "fail"
restart device and flash with R215MobileWifiFirmware_v3.1.exe. it should now work
Click to expand...
Click to collapse
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*

jose_amaral97 said:
*Hi, friend Hgall8, do you still have the R215MobileWifiFirmware_v3.1.hmf? I've been searching but I do not get it anywhere on the internet*
Click to expand...
Click to collapse
Not sure if I'm allowed to post links here, I'll send you the link in pm

E5372T -,Stucked on boot logo firmware version 21.290.03.00.838
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help

Sir I have huawei e3272s-927 airtel modem when I upgrade software with wizard after the device not found and modem symbol is in device manager appear and disappear what the solution pls help me

dr_edmund said:
Hi do you have any solution for version 21.290.03.00.838(current) ? I'M stucked on boot logo. How to downgrade to version 21.290.03.00.00? I tried using Fr3sis flasher 1.0v and it didn't work. I also tried Fr3nsis 1.6v but it didn't work bcuz it doesn't detect the com port meanwhile fr3nsis 1.0v can read the com port but different number of Com port. Let say huawei modem (com 9) but when it comes to detect the port using Fr3nsis 1.0v it show com4 instead. Desperately need help
Click to expand...
Click to collapse
use boot short pin method its helped
---------- Post added at 06:22 PM ---------- Previous post was at 06:16 PM ----------
alaa2003 said:
thanks for advice , I will post it here too , you mean gsmhosting?
I get some update after many trying
I press power+Menu , as soon as (Force download) appear I quickly plugin the USB cable which connected to PC
suddenly I got screen of mifi ( DONOT POWER OFF) its force update screen, then my pc starts to feel with the modem and starts to installing driver
the problem that this PC have new windows so it does not recognize of all drivers,
after some time I installed the driver from
https://docs.google.com/file/d/0B9zJjgJXRt_eTlU2N2pJSVlRMWs/edit?pli=1
then I tried to Enter Force download again I could not
I tried more but as soon as I enter it , the mifi go out again to Huwaie logo
I do not know how I enter fore download mode easy and make PC feel again with Mifi
Click to expand...
Click to collapse
first press menu then power dont release until show arrow image
connect mifi to pc
install huawei driver
check your port device use huawei flasher or you can install firmware with exe extension

[Q] bricked my phone (lg g2)

I think i flashed wrong stock ROM.
problems with phone now are
1.no recovery
2.no download mode
3.stuck at lg logo.
4.whenever plug in USB it starts automaticaly and get stuck at LG logo.
5. can be power of by long pressing power button (it gets reboot in between).
but it can enter in "three button press" mode
please help me ...

Connect it to pc. What happens when it's connected ?

YOU NEEd read topic
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404

hey
tungkick said:
YOU NEEd read topic
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
Brother , i have read this article but i m not getting it ... i have opened my phone but i think its not working ..

Devil216 said:
Brother , i have read this article but i m not getting it ... i have opened my phone but i think its not working ..
Click to expand...
Click to collapse
if hard you add friend facebook tungkick777 i check now
If qualcomm 9006 phone of you i unbrick free

Are you sure download mode isn't working? Easiest way is this... With phone off, hold ONLY the up volume key. Then while holding, plug in the phone to the PC. What does it do?

hey..
tungkick said:
if hard you add friend facebook tungkick777 i check now
If qualcomm 9006 phone of you i unbrick free
Click to expand...
Click to collapse
.. i have sent u the req on facebook please accept ..

please help ..
please help with .. which sotck rom to use , and also , which partition images to use (for flashing the partitions)
Phone model : lg g2 d802 (32 gb) , Europe purchased .....
i have been able to use the methed of short circuiting the IC capacitors and flashed partitions but now phone stuck in firmware upgrade screen .... now the problem is that i dont know the model of stock rom to flash ..

Lenovo A3500-HV Bricked while flashing ROM ( Cable disconnected )

OS : Windows 8.1 (With drivers successfully installed ) X64
Also tried on Windows 7 (With drivers successfully installed ) X86
Using SP flash tool
The device had this ROM : A3500HV_A442_01_37_140920_ROW
and it is the same I was trying to flash
Hi all , My lenovo A3500-HV went crazy and I had to re-install the rom ..
but while flashing using SP ( all drivers are OK ) the goddamn cable disconnected at about 15% - 20% from total progress
CURRENT STATE :
DEAD :'(
can't power up , nothing happens after pressing power button
can't go into recovery mode or download mode ( nothing happens when pressing VOL UP & Power , VOL UP & DOWN & Power or any other sequence )
it is not charging when I put it on the charger or the USB
is not being recognized when I plug it in ( see attachments please ) !!
device manager screen shot attached please have a look
-----
any hope it can revive ?? , how ??
or just go to the warranty ( really few days left ) .. note that it was rooted device .. ( ( will they ever detect the root if the device is dead ? ) )​

up

up

Help my update
ebram96 said:
up
Click to expand...
Click to collapse
I Have same problem. Did you have ANY SOLVE ?:angel:

I have same problem too,,Did you find any solution??

p.m.6 said:
I have same problem too,,Did you find any solution??
Click to expand...
Click to collapse
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help

i have the samy problem
i have the same problem but i dont know how to fix it

ebram96 said:
Look the device was stuck at boot but showing nothing on screen .. so I waited till it has 0% battery and re-flashed the rom successfully .. if you still having problems text me I may help
Click to expand...
Click to collapse
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':

kakung said:
is it really works? but i cant even see the screen backlight is turned on. was it the same with yours? how would you know when the battery level is 0%?
then after (we believe) the battery level is 0% you just connect your tab to your computer to make it show up with COM X connection, correct?
hope it really works and not a coincident (':
Click to expand...
Click to collapse
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine

Lenovo A3500 bricked, "USB device not recognized"
ebram96 said:
YES , the tab backlight was off and there was not any sign of it working and then I lost hope and left it for a while and then I tried the charger and it was recharging so I tried flashing and it worked just fine
Click to expand...
Click to collapse
Lenovo A3500FL_A422 bricked, "USB device not recognized" when connected to windows, could not flash it using SP Flash Tool.
After disconnected the battery, flash process begun and was OK.
Thanks !

i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)

arshiyah53 said:
i have the same problem as yours
after i disconnect battry and flash rom it gets error while flashing on 20%
what should i do ?
:crying:
error : S_FT_DOWNLOAD_FAILD (4008)
Click to expand...
Click to collapse
i'm manage to get on 40%
but it stuck in that.
error : S_FT_DOWNLOAD_FAILD (4008)
show up.
change the cable, change pc to laptop,
noting happen.
any sugestion?

LENOVO A3000 flash error , dead boot

my device : lenovo tab A3000H , the box says the CPU is MTK8389 , dead boot , cannot power on.
detected in windows as " MTK USB PORT 3" , cannot install DA USB VA COM.
baterry is built in , cannot be de attached without opening inner casing and screws.
- SP Flash Tool v3.1316.0.150 / SP_Flash_Tool_v5.1604
- ROM : A3000_A422_011_022_140127_WW_CALL_FUSE / A3000_A421_000_029_130327_CN_3G by Azam / A1000F_A412_01_23_130822_ROW_USER by Azam
1. i run flashtool , any version is same results
2. i load scatter file : MT6589_Android_scatter_emmc.txt , try few scatter file that available on xda forum
3. i tick marck DA DL Checksum
4. i load FAC IMG file
5. i click DOWNLOAD
6. Flash tool searching , then i connect the Lenovo TAB , at COM3
7. DA Agent running (RED BAR)
8. after 5 seconds idle , pop up shows thats says " BROM ERROR : ENABLE DRAM FAILED (4032) "
also same result with " firmware upgrade ", also with " format all + download"
please help , i am so grateful if someone can give solution

same here

Hello anyone have solution on this? I have same problem

I need help too.. please dear experts..
I flashed my A3000, but it stopped at 87% at stay there all evening ans night. So today I try to switch it on - nothing happens, long pressing buttons: nothing, dead device.
I connected it to PC, and in device manager it shows "unknown device" (not: mt65xx unknown device!) So it seems it is not completely dead!
I try to install the mt65xx driver, but I cant.
So any hint what I can try to revive it? I would apreciate anything very much, that you!
----
EDIT: Windows shows CODE 43 for the A3000. What can I do?

Solved..
I let the battery drain for some day, then after pushing reset button, It starts to load the battery again. Then it repeatly starts to boot every 3 seconds. Switching it off and try to flash it again - bingo! Everything is fine again
biokeks said:
I flashed my A3000, but it stopped at 87% at stay there all evening ans night. So today I try to switch it on - nothing happens, long pressing buttons: nothing, dead device.
I connected it to PC, and in device manager it shows "unknown device" (not: mt65xx unknown device!) So it seems it is not completely dead!
I try to install the mt65xx driver, but I cant.
So any hint what I can try to revive it? I would apreciate anything very much, that you!
----
EDIT: Windows shows CODE 43 for the A3000. What can I do?
Click to expand...
Click to collapse

hi
biokeks said:
I let the battery drain for some day, then after pushing reset button, It starts to load the battery again. Then it repeatly starts to boot every 3 seconds. Switching it off and try to flash it again - bingo! Everything is fine again
Click to expand...
Click to collapse
can you give me link of your rom