Related
I want to know have can i solve my wifi problems without installing new rom on it.
What is the wireless driver, where are they in my system files?
We can fix the camera issues with changing camera lib files. Can i do that for wifi?
Wifi Problem is ;
I can connect wifi, first it was work fine. After several minutes it dropped and not connect any internet, after several seconds it reconnectted. It always keep going this way.
Can you please help me on this?
What ROM version are you running?
B137 stock and modaco.com/content/huawei-u8800-ideos-x5-u8800-modaco-com/342205/23-june-b137-r3-flb-custom-rom-for-the-huawei-u8800-with-online-kitchen/
I have two of them on my clockwork recovery. Both of them have same issue. I want to try other roms, but its too hard for me to give the time for each rom. So i want to try other roms wifi libs, driver, firmwares.
Not a fan of 137s I've tried so far...You should try these versions:
- V100R001C00B136 (Overseas General version) 2011-05-17
- V100R001C17B160CUSTC17D002 (China Unicom) 2011-04-29
http://wiki.modaco.com/index.php/Huawei_Firmware_U8800
To install any of the ROMs, just download the Huawei Firmware you want and unzip it, there should be a folder called "dload" copy that folder and its contents to your sdcard.
Power off phone then hold both volume buttons while powering on the phone, the update should start.
I don't understand why you think it's easier to change a lib/driver and spend a huge amount of time trying to get it to work, when it takes 30 minutes to install a new ROM and all previous applications, if synced with a Google account. When I first got the phone, I've installed like 6-7 ROMs in a matter of hours...
So, in my opinion, you should try the B160 or B136 before you actually start fiddling around with libs.
katu2006 said:
Not a fan of 137s I've tried so far...You should try these versions:
- V100R001C00B136 (Overseas General version) 2011-05-17
- V100R001C17B160CUSTC17D002 (China Unicom) 2011-04-29
To install any of the ROMs, just download the Huawei Firmware you want and unzip it, there should be a folder called "dload" copy that folder and its contents to your sdcard.
Power off phone then hold both volume buttons while powering on the phone, the update should start.
I don't understand why you think it's easier to change a lib/driver and spend a huge amount of time trying to get it to work, when it takes 30 minutes to install a new ROM and all previous applications, if synced with a Google account. When I first got the phone, I've installed like 6-7 ROMs in a matter of hours...
So, in my opinion, you should try the B160 or B136 before you actually start fiddling around with libs.
Click to expand...
Click to collapse
Are you read my first post ? I Don'T want to try roms. Install new rom, try wifi, over and over. End when find it, wait for the all install downloaded. Chancge launcher and other apps to what you want. It is just boring. I try 4 different froyo roms and nothing seems worked. If i know the what file i must replace, i just have time. Many many more time.
Özgürce said:
Are you read my first post ? I Don'T want to try roms. Install new rom, try wifi, over and over. End when find it, wait for the all install downloaded. Chancge launcher and other apps to what you want. It is just boring. I try 4 different froyo roms and nothing seems worked. If i know the what file i must replace, i just have time. Many many more time.
Click to expand...
Click to collapse
So, stock rom doesn't work too?
Özgürce said:
Are you read my first post ? I Don'T want to try roms. Install new rom, try wifi, over and over. End when find it, wait for the all install downloaded. Chancge launcher and other apps to what you want. It is just boring. I try 4 different froyo roms and nothing seems worked. If i know the what file i must replace, i just have time. Many many more time.
Click to expand...
Click to collapse
) I've read your post, but if you think this is windows, where you can just change the wifi drivers, you're in for a treat . The newer ROMs wifi is fine, so whatever you're doing, you're obviously not doing it right or you have a faulty phone.
katu2006 said:
) I've read your post, but if you think this is windows, where you can just change the wifi drivers, you're in for a treat . The newer ROMs wifi is fine, so whatever you're doing, you're obviously not doing it right or you have a faulty phone.
Click to expand...
Click to collapse
I don't understand a thing from your post. Are you understand me?
IF IS A WINDOWS, I CAN CHANGE DRIVER FROM SYSTEM32/DRIVERS. Or install new driver for it. Newer roms are for WHO ? Mine and other my friends in turkey, have same problem. Even they updated the B137 with updata.app from original sources.
Please if you don't know or understand my post, just leave it to be. Obviosly i can't decribe my problem to you.
The whole windows thing was a comparison...All I was trying to say is that upgrading drivers is NOT EASY, as the problem may not be in the lib file.
You better go and learn some ENGLISH, before you try and understand the answers you're given. ) quote "Are you understand me?"
Very very few people have wifi problems like you are experiencing. This isn't to say it doesn't happen as obviously you are having issues, but it's not a rom issues. It's likely that your problem is either a hardware issue with the phone or an issue with your router settings.
Currently there aren't any alternative wifi libs you can try since all the roms are using exactly the same wifi libs which are located in the kernel image, not the system.
I've been experiencing the same problem -international B136 ROM- however I think it may be the router that is the cause of it. Whilst in the main house with the new wireless g router, no issues, everything works fine. In my extension with the old wireless b router the problem happens all the time.
The problem doesn't really bother me to much, but I thought I'd add my 2 cents just in case you were after some more information on the issue =)
guys, I recommend reading my post in the general section with subject "Wifi Client Tuning ... solve connection problem "
Sent from my IDEOS X5
i have simillar wifi problem. When i connect my airties modem,my internet connection is vere very slowly(60-80kpps as speedtest program) How can i fix this problem? Do you think b136 or b160 could fix it?
fukul2027 said:
i have simillar wifi problem. When i connect my airties modem,my internet connection is vere very slowly(60-80kpps as speedtest program) How can i fix this problem? Do you think b136 or b160 could fix it?
Click to expand...
Click to collapse
Definitely, if you've got something like B133, the first thing you have to do is upgrade to 136-137 or 160. You will see huge improvements in terms of Wifi.
is there any problem in b136 or b160? Which one should i apply?
In my view, the best of stock ROMs is B160. The battery lasts longer and it's got less problems.
how can i see my rom version? and do u send offical b160's link?
Go to Settings >>About Phone and scroll down to Build Number. It should look like this U8800V100R001C00B133SP01 and the bit that interests you is B133 or whatever version you've got.
Since Modaco Wiki is down, try this link:
http://www.filefactory.com/f/0f067250fb54623e/
B160 is called China Unicom in that list.
I've managed to get a cached version of Modaco Wiki that is currently down.
http://webcache.googleusercontent.c...&hl=en&ct=clnk&gl=au&source=www.google.com.au
A direct link to b160 from Huawei - http://www.huaweidevice.com/tcpsdow...me=U8800 V100R001C17B160CUSTC17D002(中国联通).zip
My rom seems to b136 is it change anything?
Hello all! you're awesome!
I have this pc/tablet. I try to put a spanish language, and was impossible.
I decided to put a clean install of windows 10, and I crash it...
Now, all is in spanish, but there are some things that not work now: wifi, audio, touchscreen...
I know that it's a drivers problem. But there are not drivers for this product.
I hope that some of you can share with us (and me) an image of the original windows10 that come with the tablet, and maybe I can install.
Now...I lose 350$ in a few hours...
I want them too
i think the original Windows 10 installation image from Voyo with the drivers is here
Code:
https://9896df.lt.yunpan.cn/lk/cxxWj6pRmPTRi#/-0
but i cant make a account there to download it .....
can anyone help to upload it somewhere else?
This is for Voyo v3 mini PC as I can see not for Voyo V3 Vbook
Hi
you can find all folders & files from this China site also hire even Image of restoration
https://yadi.sk/d/9ixK06sZovfdq
stbn7777 said:
Hello all! you're awesome!
I have this pc/tablet. I try to put a spanish language, and was impossible.
I decided to put a clean install of windows 10, and I crash it...
Now, all is in spanish, but there are some things that not work now: wifi, audio, touchscreen...
I know that it's a drivers problem. But there are not drivers for this product.
I hope that some of you can share with us (and me) an image of the original windows10 that come with the tablet, and maybe I can install.
Now...I lose 350$ in a few hours...
Click to expand...
Click to collapse
do you manage to repair Windows dude
hire is all files from Voyo vbook V3 drivers,you can also with google translate use 4pda forum find many answers
I managed to get the drivers from their website after a lot of struggle. I uploaded them to mega just in case others need them:
http s://me ga.nz/#!hVB0Ea6Y (apparently I need a min number of posts to put links)
The decryption key is the following: !9fQTHbIb-H812jw2MwVOAPZoZvDGKuywgiRBkjkOwEE
The wifi driver is giving some security warning when you try to install it. I already had it working yesterday (using other drivers I found) so I decided to not install it when I saw the warning. The rest of them made my camera and touchscreen work properly though so they are good.
jeefo12 said:
I managed to get the drivers from their website after a lot of struggle. I uploaded them to mega just in case others need them:
http s://me ga.nz/#!hVB0Ea6Y (apparently I need a min number of posts to put links)
The wifi driver is giving some security warning when you try to install it. I already had it working yesterday (using other drivers I found) so I decided to not install it when I saw the warning. The rest of them made my camera and touchscreen work properly though so they are good.
Click to expand...
Click to collapse
I ordered ssd disk 128gb ,today arrive in Macedonia tomorrow i will installit on board to see will it work or not as expanded memory.
as i can see till now on my Voyo v3 ,i have oni one sticky button ,windows work geat..
with wifi(driver) i haven`t problems only yet but on 4pda.frorum(rusia) with google translate as a option in Chrom you can get best Voyo Vbook V3 community and best info for Voyo on the net..
jeefo12 said:
I managed to get the drivers from their website after a lot of struggle. I uploaded them to mega just in case others need them:
http s://me ga.nz/#!hVB0Ea6Y (apparently I need a min number of posts to put links)
The wifi driver is giving some security warning when you try to install it. I already had it working yesterday (using other drivers I found) so I decided to not install it when I saw the warning. The rest of them made my camera and touchscreen work properly though so they are good.
Click to expand...
Click to collapse
hey, what's the decryption key for your files man?
aussiepr said:
hey, what's the decryption key for your files man?
Click to expand...
Click to collapse
Sorry, I had no idea mega is encrypting it automatically. This is the key !9fQTHbIb-H812jw2MwVOAPZoZvDGKuywgiRBkjkOwEE (exclamation mark included)
jeefo12 said:
Sorry, I had no idea mega is encrypting it automatically. This is the key !9fQTHbIb-H812jw2MwVOAPZoZvDGKuywgiRBkjkOwEE (exclamation mark included)
Click to expand...
Click to collapse
Thanks, worked fine
Hi, I've recently bought the core m3 version off Gearbest, but ran into a ton of issues out of the box. As with all chinese tablets/laptops/convertibles I buy, the first thing I did was do a Windows reset (to get rid of any potential bloatware/localization issues/ etc/). However, since the reset, I have been unable to charge the device beyond 80%, the pen that came with it is not registering any input, and the touch screen input is waaaaay off (closer to my finger at the top left corner, then deviates further off the further I get from that point).
Now, I'm unsure whether these issues existed prior to the reset, or whether they were caused by it (since I didn't really use the device long enough before the reset). The easiest way would probably be to send it back to claim warranty, but the whole claim procedure through Gearbest is a nightmare at best. I would prefer to try everything possible before actually attempting that ordeal.
I would like to try installing a fresh copy of windows over the "reset" version to see if the potential driver issues are resolved, but am unable to find the proper installer for this device from the myvoyo website. The one available is apparently for the atom x5-Z8300 version of the device, not for the core M version. I did try the drivers from the link above in this thread, but it caused a WDF_VIOLATION bsod.
tl:dr Does anyone have ANY suggestions as to what I can try to fix these issues, or potentially have a link pointing to the correct drivers/windows installer I will need to get the device back to the factory settings? (I speak neither Chinese nor Russian so the company's website and the apparently thorough 4pda forum was of limited use to me - google translate is wonky at best)
Thanks and sorry for the long rant.
WooHoo!! Thanks that fixed my touch and wifi issues!
Do not hesitate to contact them directly via e-mail (the voyo manufacturer). I just did and they seem very helpful (or I am just lucky). I am currently trying to install Android on the machine with their help. If I get all the drivers to work I will post here everything needed + instructions in case anyone wants to do it as well.
---------- Post added at 09:02 AM ---------- Previous post was at 08:57 AM ----------
riyasatazim said:
Hi, I've recently bought the core m3 version off Gearbest, but ran into a ton of issues out of the box. As with all chinese tablets/laptops/convertibles I buy, the first thing I did was do a Windows reset (to get rid of any potential bloatware/localization issues/ etc/). However, since the reset, I have been unable to charge the device beyond 80%, the pen that came with it is not registering any input, and the touch screen input is waaaaay off (closer to my finger at the top left corner, then deviates further off the further I get from that point).
Now, I'm unsure whether these issues existed prior to the reset, or whether they were caused by it (since I didn't really use the device long enough before the reset). The easiest way would probably be to send it back to claim warranty, but the whole claim procedure through Gearbest is a nightmare at best. I would prefer to try everything possible before actually attempting that ordeal.
I would like to try installing a fresh copy of windows over the "reset" version to see if the potential driver issues are resolved, but am unable to find the proper installer for this device from the myvoyo website. The one available is apparently for the atom x5-Z8300 version of the device, not for the core M version. I did try the drivers from the link above in this thread, but it caused a WDF_VIOLATION bsod.
tl:dr Does anyone have ANY suggestions as to what I can try to fix these issues, or potentially have a link pointing to the correct drivers/windows installer I will need to get the device back to the factory settings? (I speak neither Chinese nor Russian so the company's website and the apparently thorough 4pda forum was of limited use to me - google translate is wonky at best)
Thanks and sorry for the long rant.
Click to expand...
Click to collapse
[email protected] . Contact them directly. I just did and they sent me the drivers for the cherrytrail version (though that's not exactly what I asked for). Keep your english simple and concise so they understand you. Theirs is quite bad.
Hi guys
The drivers doesn't work anymore.. someone has them?
i recently bought the voyo v3 ultrabook from gearbest and it constantly just shuts off without warning. this kills windows after a while so have reset it multiple times.
tried to return it to gearbest but the cost was like £60 and then the post office wouldnt touch it because it contained a lithium battery.
basically gave up and accepted £15 compensation from gearbest - would like to try android on this as i have some suspicion that the device could be ok. it can go for hours when windows is not fully booted ie when restoring windows so this could well be on OS thing. trying android would be a good test of this.
big waste of money and time really, note to self is only buy from local stores in the future! doh.
Voyo stays in blackscreen
Hi together,
I need your help. I have the v3 flagship with m3-6y30 and it stays in blackscreen.
I changed the win10 boot options to safe mode and now the screen stays black only. The 'caps lock' led is working. I tried to enter bios or uefi, but it does not work, or at least the screen stays black.
Next I will try to connect micro hdmi to a monitor and I hope that it will work. Another solution would be to write a new originial voyo win10 image to the m2 ssd. Could anyone provide me his ssd image? Maybe someone saved it after resetting win10? I asked voyo for that image, but they did not answer..
It would be great if someone could help me.
Regards
dschingi86 said:
Hi together,
I need your help. I have the v3 flagship with m3-6y30 and it stays in blackscreen.
I changed the win10 boot options to safe mode and now the screen stays black only. The 'caps lock' led is working. I tried to enter bios or uefi, but it does not work, or at least the screen stays black.
Next I will try to connect micro hdmi to a monitor and I hope that it will work. Another solution would be to write a new originial voyo win10 image to the m2 ssd. Could anyone provide me his ssd image? Maybe someone saved it after resetting win10? I asked voyo for that image, but they did not answer..
It would be great if someone could help me.
Regards
Click to expand...
Click to collapse
Could solve it. I can enter Uefi by pressing Esc and I had to use an external monitor.
hi dschingi86
i have a similar problem - I did a clean re-install of windows 10 pro and the screen stopped working. The backlight is definitely working - i can see it come on, but nothing is displayed on the screen. the screen still works for touch though.
It only displays when connected to an external monitor via hdmi.
i've tried reinstalling drivers etc, but nothing works - how do i get the screen to start working again?
How do you enter BIOS?
please help
hensk said:
I ordered ssd disk 128gb ,today arrive in Macedonia tomorrow i will installit on board to see will it work or not as expanded memory.
as i can see till now on my Voyo v3 ,i have oni one sticky button ,windows work geat..
with wifi(driver) i haven`t problems only yet but on 4pda.frorum(rusia) with google translate as a option in Chrom you can get best Voyo Vbook V3 community and best info for Voyo on the net..
Click to expand...
Click to collapse
What type of m.2 ssd drive does the Voyo v3 Pro use sata iii or pcie? What is the maximum size in gigabytes that the Voyo V3 Pro can use? Do you happen to have a image file of Windows 10 for the Voyo v3 Pro? The link to the image file on the Voyo web site no longer works.
Need HELP @ Note 3 ( SM-N9002 / SM-N9009 ) SIM2 Call Audio/Mic Routing & MagMa-NX ROM
Got my hands on this one beautiful piece of Samsung Galaxy Note3 SM-N9002 Dual-Sim, and it had this odd version of Chinese samsung rom on it, as it comes from factory, half apps installed that comes with it was in Chinese and had no play store etc and was on 4.xx android, so I went and did my research, found working TWRP, managed to install it OK, then tried few beautiful ROM versions and found MagMa-NX (note7 ported ROM) works wonderfully well, zero crashes etc etc and it also has kernel support for SM-N9002 during installation which I chose to use, all features work 100% and everything works ok, all but SIM#2 call audio.
I mean, I have signal on both sim cards simultaneously OK, I can make and receive calls and all would seem ok, but when dialed to or from SIM#2 there is no audio coming out from earpiece or loudspeaker and mic dont seem to activate as even if I try to record call which feels like muted for both caller and receiver ends, call audio recorder while recording does not pick up any sound trough phone microphones, so I think its something to do with settings in some file not done right or else I dont know what I could be doing wrong.
both sim cards worked 100% ok before ROM flash, but now I'm lost because I cant even flash back to old stock rom, and yes I have gathered original android 4.xx rom but it fails flashing via ODIN every time, so my best bet is on doing some DIY on current MagMa-NX note7 port rom... I wonder if there are any fellows who I could buy the paypal-beer for great help sorting me out on this DIY project? Please PM me or post here if you feel like you could collaborate in resolving this dilemma for me... would highly appreciate folks
I will keep an eye out
I think I figured something. Everytime I attempt to make a phone call on this, I get to choose from which sim card should I dial, #1 or #2 , but what I have noticed now is that I am being asked "SIM1" or "Slot2" ... SLOT 2 I thought? That may be the reason that audio routing doesnt work well for this... tried searching build.prop but this string is not there and I just dont know where to search for this string to get this fixed, anybody can chime in?
Thanks
Did you figure it out ? As i have the same problem with the same rom in addition that when i call anyone and he is on a call i don't get notified with " call waiting
Mr.Ultimate said:
Got my hands on this one beautiful piece of Samsung Galaxy Note3 SM-N9002 Dual-Sim, and it had this odd version of Chinese samsung rom on it, as it comes from factory, half apps installed that comes with it was in Chinese and had no play store etc and was on 4.xx android, so I went and did my research, found working TWRP, managed to install it OK, then tried few beautiful ROM versions and found MagMa-NX (note7 ported ROM) works wonderfully well, zero crashes etc etc and it also has kernel support for SM-N9002 during installation which I chose to use, all features work 100% and everything works ok, all but SIM#2 call audio.
I mean, I have signal on both sim cards simultaneously OK, I can make and receive calls and all would seem ok, but when dialed to or from SIM#2 there is no audio coming out from earpiece or loudspeaker and mic dont seem to activate as even if I try to record call which feels like muted for both caller and receiver ends, call audio recorder while recording does not pick up any sound trough phone microphones, so I think its something to do with settings in some file not done right or else I dont know what I could be doing wrong.
both sim cards worked 100% ok before ROM flash, but now I'm lost because I cant even flash back to old stock rom, and yes I have gathered original android 4.xx rom but it fails flashing via ODIN every time, so my best bet is on doing some DIY on current MagMa-NX note7 port rom... I wonder if there are any fellows who I could buy the paypal-beer for great help sorting me out on this DIY project? Please PM me or post here if you feel like you could collaborate in resolving this dilemma for me... would highly appreciate folks
I will keep an eye out
Click to expand...
Click to collapse
Which CSC did you choose?
I did not figure anything out guys... as I was trying to get this working, I tried every CSC option possible... none worked. Which should have been the one that's working for this models?
in fact Im thinking of selling this beauty of note3, its almost new... in case someone interested I have it... because I would love note7 port rom on this, and nothing else... PS I could live with it being just single-sim option, it works but not perfect as sim #2 is useless then... signal there and texts only works for it as described above...
at the moment its on stock adroid 5.0 and its all 100% ok and fine, flawless, but its boring!
Mr.Ultimate said:
I did not figure anything out guys... as I was trying to get this working, I tried every CSC option possible... none worked. Which should have been the one that's working for this models?
in fact Im thinking of selling this beauty of note3, its almost new... in case someone interested I have it... because I would love note7 port rom on this, and nothing else... PS I could live with it being just single-sim option, it works but not perfect as sim #2 is useless then... signal there and texts only works for it as described above...
at the moment its on stock adroid 5.0 and its all 100% ok and fine, flawless, but its boring!
Click to expand...
Click to collapse
Well, i know that mixer paths are different on single sim and dual sim phones.
Can you extract from stock rom the file "/system/etc/mixer_paths.xml" and overwrite the one in custom rom ?
I think I tried something similar if not exact with no success .. let me repeat the process just in case...
PS also, I will try and dump both versions of these files. Is there anything else I may need to dump from stock rom 5.0 rom?
Mr.Ultimate said:
I think I tried something similar if not exact with no success .. let me repeat the process just in case...
PS also, I will try and dump both versions of these files. Is there anything else I may need to dump from stock rom 5.0 rom?
Click to expand...
Click to collapse
There are some specific binaries and libs, but i'm pretty sure magma rom already inject them during flash when you select n9002 as variant.
Dumping the CSC folder is a good idea too.
zlazaar said:
There are some specific binaries and libs, but i'm pretty sure magma rom already inject them during flash when you select n9002 as variant.
Dumping the CSC folder is a good idea too.
Click to expand...
Click to collapse
cool, which is the csc folder to be exact? will there should there be any conflicts between 5.0 stock android and 6.0 in magma rom when doing CSC trick?
thanks
Mr.Ultimate said:
cool, which is the csc folder to be exact? will there should there be any conflicts between 5.0 stock android and 6.0 in magma rom when doing CSC trick?
thanks
Click to expand...
Click to collapse
Path : /system/csc
Indeed, conflits may happen. But just dump it and let we examine it.
Ok here is what I managed to try, I backed up stock rom android 5.0 all working state mixer files from etc dir, then flashed magma rom again, backed up those same files for restoration to working state, replaced files with ones extracted while on 5.0 stock android, reboot device, no sound whatsoever, phone wont even buzz keypad dialtones or connect dial phonecalls just hangs. So I went and restored back original magmanx rom mixer files, reboot, but still no success... so now I have just finished restoring 5.0 again, will dump csc folder and share with you. will also need to charge my battery a bit because @ 30% cant expect much to happen when flashing magma nx...
Thanks for the help amigo!!!
Alright, tried merging csc from 5.0 to magmanx 6.0, no luck. then tried after this to merge mixer file from 5.0 to magmanx 6.0 , no luck, back at square1....
files attatched both versions... obviously something wasnt done right from looong time ago and had never been reported, been forgotten... in regards of 9002 users..
https://forum.xda-developers.com/attachment.php?attachmentid=4154927&stc=1&d=1495202856
Mr.Ultimate said:
Alright, tried merging csc from 5.0 to magmanx 6.0, no luck. then tried after this to merge mixer file from 5.0 to magmanx 6.0 , no luck, back at square1....
files attatched both versions... obviously something wasnt done right from looong time ago and had never been reported, been forgotten... in regards of 9002 users..
https://forum.xda-developers.com/attachment.php?attachmentid=4154927&stc=1&d=1495202856
Click to expand...
Click to collapse
Indeed, the mixer_paths of TW6 is missing the whole part concerning "cp2" (second sim).
I'm not a reel dev but i tried to add missing parts from TW5.
Can you please try the attached mixer_paths on magma ? (don't touch csc).
zlazaar said:
Indeed, the mixer_paths of TW6 is missing the whole part concerning "cp2" (second sim).
I'm not a reel dev but i tried to add missing parts from TW5.
Can you please try the attached mixer_paths on magma ? (don't touch csc).
Click to expand...
Click to collapse
amazing, will try in few mins
no success, exact same fail of global audio post merging files... any more ideas... ? really appreciate your effort man, really do!
Mr.Ultimate said:
no success, exact same fail of global audio post merging files... any more ideas... ? really appreciate your effort man, really do!
Click to expand...
Click to collapse
Did you checked correct permissions before reboot ?
I'm afraid the problem is deeper than mixer paths.
I'll try to digg more.
I enable root explorer in third party file manage, grant permission, copy file from sd card to system/etc, prompt to overwrite -grant, overwrite complete, power off phone from power-button menu, power on, done. is this bad/incorrect procedure? magmanx has root from stock, when I navigate root dir I get access grant prompt, I grant it and then I can modify whatever.
please let me know what else I could do? maybe there are specific files I could look in to dump out of working 5.0 rom? Thanks!
or maybe just directory content filenames that could/would make sense by their name etc?
its weird, I think its something to do with the kernel itself... maybe Im wrong, but I dont think 9002/9008 kernels were ever made properly to be tested thus the errors... I cant even find any other kernels for 9002 other than included in magmanx and it aint working well anyway
Mr.Ultimate said:
I enable root explorer in third party file manage, grant permission, copy file from sd card to system/etc, prompt to overwrite -grant, overwrite complete, power off phone from power-button menu, power on, done. is this bad/incorrect procedure? magmanx has root from stock, when I navigate root dir I get access grant prompt, I grant it and then I can modify whatever.
please let me know what else I could do? maybe there are specific files I could look in to dump out of working 5.0 rom? Thanks!
or maybe just directory content filenames that could/would make sense by their name etc?
its weird, I think its something to do with the kernel itself... maybe Im wrong, but I dont think 9002/9008 kernels were ever made properly to be tested thus the errors... I cant even find any other kernels for 9002 other than included in magmanx and it aint working well anyway
Click to expand...
Click to collapse
The file "mixer_paths.xml" must have permission set to 0644 (like other files in /system/etc directory).
And try darklord Kernel.
6044 is as per read/write permissions for user enabled, as per this link http://permissions-calculator.org/decode/0644/ , I assume these permissions will auto set after moving replacing file do they not?
Where do I obtain the darklord kernel? I was pretty sure it comes with it... let me re-do the rom and take some snips as I go
Mr.Ultimate said:
6044 is as per read/write permissions for user enabled, as per this link http://permissions-calculator.org/decode/0644/ , I assume these permissions will auto set after moving replacing file do they not?
Where do I obtain the darklord kernel? I was pretty sure it comes with it... let me re-do the rom and take some snips as I go
Click to expand...
Click to collapse
Sorry i just noticed you already have darklord kernel.
And set permission like other files in this directory (if not already done by your file manager).
Hello,
i still did not find any direct solution for sound output dilemma, but i think i found a less elegant way by downloading an sound-output/input App, i dont know the english word exactly.
therefore the system (.... I guess in the Kernel? or in the Stock Android? or something like this... ) has wrong settings.
I had to switch output to speaker permantly, works ok for most of the time.
And the problem described is just a symptom, whether it is zdroid or lingeage, does not matter!
system ist not stabil! Sometimes it is, and then the apps close by thereself or system is rebooting without any reason or apps freeze etc. pp. ...
I do have just 8-15 apps, you know. You can exclude all those things you can search here or through google easily, i did this for a week, ok.
So i just needed a os which is very stable and very easy (performance first) and an hint from you all regarding the main cause (see above)?
For example i followed the advice of an user here, by installing stock android, i did, works, and the gapps/flashing os bei twrp (new version). done done...
what is the f** problem? I am so frustrated ,because i did these procedere maybe 6 times with other data / os(roms), you know?
So i need clear information about this cause.
And beyond that the device id is n/a or unknown if i boot my system. This device is not blabla... You know this screen?
(Problem Lineage + zdroid, does not matter) ...
Also the warnings ( i think google trust) <--- registering Google ID works through google.de website, but did not solve it (+ freezing system --> i flashed the best stable versions out there!!!)
Can you advice me, thanks Sir
Friends, I searched on google and youtube for the solution, but I could not find one. My phone works fine on Oreo. But whenever I upgrade it to pie, i.e., from 340 to pie. I face the following errors
1. Mac Id is null and cannot connect to Wifi
2.Camera Torch does not work
3.Wifi Hotspot not working
4.Launcher is continuously crashing......
But I can make phone calls. I tried installing custom ROM on pie, and it does not have the problem, and the official oreo Rom also has no problem. If anyone knows the solution, kindly share.
For those who are interested, when I flash the cmd file, it shows Username.ini not found and skipping, also many other data partition files... so I don't know what to do.
Please tell me if you know how to fix this. And I also tried downloading the update file and placing it in internal storage but I got same result. Hope someone will help me