Hi
I'am lookin for Omnirom 20180809 bulid AMR64 A-only by planetera. I deleted it because I thought new one will work, but touch and screen rotation isnt working for me. Old one worked like a charm.
My device isnt officially supported by treble.
Maybe anyone saved it on the drive?
Thanks
Related
I have a bug in CM 12 by Antares
My microphone and the speakers aren´t working.
Also I can´t hear anybody when collegues are speaking with me.
Is there any fix or do we have to wait ?
Thanks in advance
P.S: I´m on Samsung Galaxy S4 GT-I905 (intl)
Hi,
What ROM build did you install?
Nobody have that error, maybe you installed an old alpha build!
Latest: https://www.androidfilehost.com/?fid=95916177934540263
Reply
HI,
Thanks for the answer
I have the latest from 15th march 2015
This ist the build I use || cm-12-20150315-OPTIMIZED-jflte.zip ||
also I use Philz Touch 6.x
Did you do a clean flash?
Reply
Hi.
Yes I do several times to make it more accurate.
I have tried today something: I sticked my headset halfway in then I play music a little bit comes out the speakers one second more its gone.
I think my device can´t recognize when the headset ist plugged in or something.
I will make another clean and when it´s nothing changed then I might wait until the beta is over and the stable release and downgrade to CM11 if that works for the moment :|
But I really didn´t understand my collegue had done this with his Samsung Galaxy S3 and he doesn´t do clean and for him all is working
EDIT: I think it´s the bootloader I found this in a forum but how to fix this ?
EDIT EDIT: I have it fixed right now it was my headset the device dont recognized that I have pulled it out sry for wasting your time
but thanks though
Hello community.
I'am having too many issues with muy OnePlus 2 (A2005).
On oxygenos doesn't work sensors (gyro,accel,proximity) and after a time lf use touch became unusable
On hydrogen OS doesn't work fingerprint unlock (lets me add fingerprint but cant unlock) anyway this os doesn't like me.
Actually i install cm13 and im having same issues than oxygen , touch sometimes became unusable (for some seconds) , sensors doesn't works , camera open but i cant see anything , gyroscope doesn't works.
If its possible, i want to stay con cm13
Sorry for my english and thank you so much.
Regards from Argentina
Flash latest OOS 3.1 using the Qualcomm tool, that should restore the persistent partition needed to get the sensors running again and maybe fix the fingerprint reader unless yours is broken hardware wise like many others.
Regards from Sweden
pitrus- said:
Flash latest OOS 3.1 using the Qualcomm tool, that should restore the persistent partition needed to get the sensors running again and maybe fix the fingerprint reader unless yours is broken hardware wise like many others.
Regards from Sweden
Click to expand...
Click to collapse
Which tool? QFIL?
Use the search function young Skywalker.
Pride, thank you so much for the answer. I install SkyDragon and all works perfectly except touch, firsts moments it works fine, but after a few minutes it comes to have issues half (and more) of the taps cannot be readed. I think your answer gonna be usefull for that too. Im going to try, maybe it's because my device was hardbricked and i restore it. Gonna try your method, any specific name of the tool? there's a few of tools by qualcomm. Anyway, im going to keep searching. Thanks again
PD: Curiously, touch works good in Hydrogen.
Okey , if i do the process for hardbrick and install Oxygen 2.x the touch works great. The problem is when im doing upgrade to android 6, because i need to install a patch https://www.androidfilehost.com/?fid=24421527759880815 . otherway , it doesn't let me upgrade. After that patch comes the issue. For the moment, im going to keep on 2.x and install OTA.
EDIT: Upgrade OTA and keep having the same issue.
Edit2: after updating ota i installed google now launcher and works okey. I think the problema is with OnePlus Launcher
Hi everyone ! this is our dedicated thread for Q&A about J3 LO14.1 ROM !
hello there...seems everybody is ignoring this part of the thread and posting in the main...LOL...well i just wanted to ask a friend of mine wanted to merge his storage in his wifes J3 2016 device so i said i would research for him as they are both not android enthusiasts,may i ask is the storage merge working on this build so can i merge the ex sd card memory with internal....thank you
I use this ROMs and merge my sd card as adobtable storage, working fine.
I use Easy Adobtable app from google play to split the sd card into 2 partitions.
10% formated as internal storage, 90% as portable.
Hey!
I really appreciate your hard work to make LineageOS on this device working.
Just wanted to build this rom for my own use as I build ROM's for all my other devices as well.
But I encountered an error when building kernel and so the build process stopped with:
make[3]: arm-eabi-gcc: command not found
I'm really wondering what caused that, because for all other devices, especially my OnePlus One, which has also a armv7-a cpu, build process is running well.
I can post the last lines of the build process (debug output) as well, but it's partial in german language.
Maybe you could start telling me what linux distro you're using for the build?
Thanks in advance.
Custom ROM with UVC full support?
Hi dear devs. You are my only hope it seems.
Is there a version of custom ROM for J320FN that includes all the good stuff for UVC functionality? I would really need such a ROM.
(Secondly, I have an old OMIZ BT Keyboard model #OMIZ6221 that connects and syncs with my J320FN and is seen correctly as "BT-FoldableKB" but doesn't work as a standard HID device. It does nothing.)
But what I really need is the UVC full support to connect an external UVC compliant USB cam. (endoscope or DVR etc).
Thanks so much for your efforts and for what you do.
Happy Christmas and a Happy 2018 !!!
P.S. I have no idea if I clicked on the right button. Please for mercy if it was not the right one.
Can we use the SDCARD as internal memory?
Yes, adobtable storage is working.
You can also split the sd card into 2 partitions using ADB command or partition tool
ie : 20% adobtable, 80 ext
How to post a new Question ?
Hi, does the camera work (take videos)
And do I have to rewrite the stock rom before installing this one or I can keep Remix resurection and replace it with Lineage-os?
sorry for my bad english
Why my wifi not working connection to the network and it says no internet. data works.
Yes my internet is working on other devices.
Hi! Can somebody help me ?
How can I change the phone model in build.prop ?
I want to play a game on phone but it not compatible with the phone. I found a solution, if I change the phone model to a better phone the game will work. I change my phone mode but in the settings is still showing SM-J320FN.
Works on j320M?
i'm about to install this rom in my J320M and i'm trying to avoid all possible errors like bootloop, wifi problems, sim problems and mobile data problems
Simply backup your nandroid device
i do want to know if the flicker and VoLTE can be solved in future versions of the monthly or main unofficial (i don't like viper OS themming style)
i do really wanna know the need of monthly updates, why these exist? it's like security patches or some polishing in the code?, i do really wanna know that because i was updating my J320m every month, and no significant difference for me in a general use
Hi, you are my only hope Is not the ROM CASTOM for the SM-J320H? I searched a lot but did not get any results Can you create a rom for sm-j320h? Thank you
Give me a quick answer
Q: do i have to reflash the rom if there is a update?
do we have any hopes for lineageOS 15.1 or 16?
Hi everybody, yesterday i have been able to install lineage-os14 on my device and everything is ok except the wifi that i can't activate.
In my home i have two ssids and i can't connect noone of them.
The system tries to connect many times and writes always (Password saved) or (Wrong password), the same password, used on my laptop is good.
Is there a guide for the J3 prime 327t1?
Hello everyone,
Sorry if this is obvious or a known bug but i've searched through a dozen of AOSP threads and found nothing satisfying.
So here's the story :
- I have clean flashed LineageOS 14.1 official 20180110 a week ago but i have those distorted voices when called over any bluetooth device (tried car and BT Speaker). On their thread someone says that it actually has been fixed in 20180103 build but the problem is still present though we're already one build ahead since then.
- Anyway, I decided to change my rom and try out AOKP. I clean flashed it today. Working fine, except for that exact same bug.
- Tried AOSPExtended, same thing.
So do all AOSP roms have this bug? I can't believe it since apart from 1 or 2 posts in Lineage's thread nobody seems to care in any AOSP rom.
If (and i hope so) the answer is no : could a kind soul show me some good AOSP rom without this problem?
Thanks for caring
Same for me on Galaxy S7 (herolte G930F).
Tried newest LineageOS and AOKP - directly after setup. No other changes made. Music over bluetooth works as expected. Phone calls imposible.
I found a Video here which shows exactly what happens:
Google: "s7 edge lineageos bluetooth Youtube":
https://www.youtube.com/watch?v=utDsXrCY5N0
Also some other People seem to have the same problems. See other thread (Post #1999):
https://forum.xda-developers.com/ga...ial-lineageos-14-1-galaxy-s7-t3529197/page200
Thanks for the infos !
I didn't see the post 1999 is LOS thread, seems like the build.prop is a good fix but unfortunately it doesn't work on latest LOS build.
Will try on AOSPExtended with the same editing on audio_hal property.
EDIT : Works on AOSPExtended ! Didn't try AOKP yet
Hi can you please explain how did you fix this ? happen exactly the same for me, thanx
Hey guys,
since I started again modding my old Tablet (SM-T560) I found a custom Rom (lineage OS 13) for my device. Okay, its not for the SM-T560 (WIFI only) but for the SM-T561 (3G Version). So far the ROM works just fine. There are only a few things, that are not working correctly and thus it needs some adjustments. Because of the build-in 3G Code in the Rom I´m getting all the 3G functionallity. I wouldn't mind that but because of this, the microphone isn't working correctly - at least that's the conclusion i drew . So I wanted to ask, If it's possible to just delete this Data from the rom (via Linux-PC or on the rooted Tablet itself) ? I tried to modify the build.prop and some other files but all I got is an Error message stating that the microphone is maybe in use. I get this message, when I try to use the recording function on the TAB. I am willing to try and test all your suggestions . My programming skills aren't the best but I think, it could be a thing I could handle, if you could tell me where to look for files that have to be modified, deleted or replaced.
Have a nice and chilled Sunday
TheDude