Hello.I have Y6 SCL-L01 and I have a problem with this smartphone.
After connecting to a power source (charger or other) is blinking red diode on front.
When I connect him to PC I can see a device with name "qualcomm hs-usb qdloader 9008 "
I can't run device to fastboot and bootloader only red diode is blinking.
Sorry for my English.
If the bad category then move this thread to another.
Bad news... your phone is bricked badly.
The drivers are here: www androidjungles com/qualcomm-hs-usb-qdloader-9008-driver/
I think there is an option to restore emui over the internet since the drivers has something to do with dhcp. Did you tried Hi-Suite? There is a recovery option, when you start it.
But anyways, good luck to get it working again :good::silly:
Related
Hi there,
Well, I am a samsung s4 i9506 owner. This weekend, I actually hard brick my phone and now it doesn't respond. It doesn't even start, No screen flash, No led flash. When I try to connect it to PC, it says Windows cannot recognize this device. However, I figured it out how to connect my phone to pc, its by holding the power button for one minute and then plug in the usb cable, which is connected to the pc on the other end. Now it shows, RELINK HS-USB QDLoader 9008 (Com 6). I tried everything whichever I could found after google search but nothing pls help
I think the people in the below thread have the same problem.
http://forum.xda-developers.com/galaxy-s4/help/samsung-s4-fullbrick-t3284237
Hi,
I was using my Xiamoi Mi A1 as usual, and suddenly everything became laggy and the phone finally shut down.
The problem is that it may have rebooted in a special mode as far as the LED blinks when I plug the battery charger. Moreover when I connect the phone to my PC it reads: "qualcomm hs-usb qdloader 9008".
I don't know how to get out of this...
Oh! and I did not modify anything: no root, no custom ROM, nothing...
thank you for reading my boring request
Toryuu.
Toryuu said:
Hi,
I was using my Xiamoi Mi A1 as usual, and suddenly everything became laggy and the phone finally shut down.
The problem is that it may have rebooted in a special mode as far as the LED blinks when I plug the battery charger. Moreover when I connect the phone to my PC it reads: "qualcomm hs-usb qdloader 9008".
I don't know how to get out of this...
Oh! and I did not modify anything: no root, no custom ROM, nothing...
thank you for reading my boring request
Toryuu.
Click to expand...
Click to collapse
Have a look here: https://forum.xda-developers.com/mi-a1/help/bricked-xiaomi-mi-a1-stuck-edl-9008-t3782688
kudos1uk said:
Have a look here: https://forum.xda-developers.com/mi-a1/help/bricked-xiaomi-mi-a1-stuck-edl-9008-t3782688
Click to expand...
Click to collapse
So I tried to flash it many times, but there is an error : "cannot recieve hello packet". I even disabled driver signature enforcement, but it does not help.
If flash with disabled driver signature enforcement did not work you will need to try some of the more radical suggestions in that thread unless you can get it to a service center under guarantee.
My phone has become a little crazy when I connect it to the computer it detects me as Qualcomm HS-USB Diagnostics 900E (COM 10) I have installed it with Qfil I have loaded the twrp but nothing also with YGDP the rom but nothing and the only thing that it works is the little light blinking please help! :crying:
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
abc617 said:
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
Click to expand...
Click to collapse
So if it's showing as qc 9008 mode than it's a good sign.. it means it's going to edl mode.
What you need to do is find a qfil flashable firmware (just google) and flash it on your device through qfil flash software.
Hi, I own a BS2 Pro Global and it suddenly froze and shutdown, it happened several times and now it's completely dead. It won't charge and boot up. When I connect it to a PC my PC detects it but no signs of power from the device.
In my 'device manager' it says "Qualcomm HS-USB QDLoader 9008 (COM#)"
it's also detected by Mi Flash tool but I don't have anything to boot from.
*If you guys know where I can download a fastboot file or if you have can you please share it with me T_T
did
jlrivera1125 said:
Hi, I own a BS2 Pro Global and it suddenly froze and shutdown, it happened several times and now it's completely dead. It won't charge and boot up. When I connect it to a PC my PC detects it but no signs of power from the device.
In my 'device manager' it says "Qualcomm HS-USB QDLoader 9008 (COM#)"
it's also detected by Mi Flash tool but I don't have anything to boot from.
*If you guys know where I can download a fastboot file or if you have can you please share it with me T_T
Click to expand...
Click to collapse
did you solve your problem?