I have get some script to generate some 9008 file,and if you want to flash you need to extract the kdz to dz then extract the dz and then rename those partition file ,for example aboot.img *.img,except the system userdata,cache,primarygpt,backupgpt,and the version of each model please find in the picture ,then you need to put those partiton file to the 9008 file folder.now you can flash via qpst ,miflach etc.link one driver:htt中ps:/中/国1dr中v.ms/国u/国s!Ah7oj7w97UeNk-QVr6uDUye-oOoTYQlink baiduyun from china 百度云:ht中tps:/国/中pa中n.bai中du.com/中s中/1HZVtPTPOlUrl-sgm8jcL0A 密password码: hmm2
Can you please post the correct links tho the files
Dear! You can and make the instruction to start, or already restore something on the phone in the mode of 9008 ???
synescu said:
Can you please post the correct links tho the files
Click to expand...
Click to collapse
I have these files. Send me a pm if you want this.
Sent from my [device_name] using XDA-Developers Legacy app
Please give it to me. Send it to email [email protected]. Thank you very much!
Zoeriva said:
I have these files. Send me a pm if you want this.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
hi can plz give the files
walidham said:
hi can plz give the files
Click to expand...
Click to collapse
Just remove the Chinese characters from the link. The first link is still working.
albertwcedla said:
I have get some script to generate some 9008 file,and if you want to flash you need to extract the kdz to dz then extract the dz and then rename those partition file ,for example aboot.img *.img,except the system userdata,cache,primarygpt,backupgpt,and the version of each model please find in the picture ,then you need to put those partiton file to the 9008 file folder.now you can flash via qpst ,miflach etc.link one driver:htt中ps:/中/国1dr中v.ms/国u/国s!Ah7oj7w97UeNk-QVr6uDUye-oOoTYQlink baiduyun from china 百度云:ht中tps:/国/中pa中n.bai中du.com/中s中/1HZVtPTPOlUrl-sgm8jcL0A 密password码: hmm2
Click to expand...
Click to collapse
Thank you so much for the files
There doesn't seem to be any files for the H831...
The firehose programer included in these files works for me only with Verizon, but failed with sprint or other brands. I hope if anyone else has another lg g5 programer shares it here.
Saloomy83 said:
The firehose programer included in these files works for me only with Verizon, but failed with sprint or other brands. I hope if anyone else has another lg g5 programer shares it here.
Click to expand...
Click to collapse
Unfortunetly due to anti-rollback messures used by LG and Carriers, fixing a hard bricked G5 is essentially immpossible. It may be doable if your on Stock Marshmellow
Related
Hi, Can anyone tell me how to convert kdz rom to zip ROM?
Sent from my LG-P700 using xda premium
Firstly u need to extract KDZ file with LGExtract. It will extract cab file and dz file within. Then u needs to extract boot.img and system.img with DZDecrypt, but to get boot.img u need to use 0.5 version. For system.img use 1.0 version. If u have that 2 files, download dsixda kitchen and follow what screen says
mrjabol61 said:
Firstly u need to extract KDZ file with LGExtract. It will extract cab file and dz file within. Then u needs to extract boot.img and system.img with DZDecrypt, but to get boot.img u need to use 0.5 version. For system.img use 1.0 version. If u have that 2 files, download dsixda kitchen and follow what screen says
Click to expand...
Click to collapse
please help me! I extracted .kdz to .cab. But i can't extract to .dz file with 7zip. Error:Can not open file as archive.
How to fjx it?
Deleted.
Sry, you meant you can't extract cabinet file? Remove cab file integration in 7zip and it will open in windows explorer.
Sent from my HTC Sensation using xda app-developers app
mrjabol61 said:
Deleted.
Sry, you meant you can't extract cabinet file? Remove cab file integration in 7zip and it will open in windows explorer.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Yes. I have done so, but I still do not unzip the file. cab. I have tried the following in cmd:
D: \ LG \ lgextract-KDZ F180K20K_00.kdz
after it is completed, I get the file F180K20K_00.cab
Next, I used the command:
D: \ LG \ 7z x (or e) F180K20K_00.cab
and I get the error message: Error: Can not open file as archive
After all, I've tried many versions and 7z LGExtract but they all failed. So what is the reason? Does windows version?
p / s: sorry for my english is very bad.
phamluong92 said:
please help me! I extracted .kdz to .cab. But i can't extract to .dz file with 7zip. Error:Can not open file as archive.
How to fjx it?
Click to expand...
Click to collapse
see post #2. use dzdecrypt to extract the .dz file.
andwie said:
see post #2. use dzdecrypt to extract the .dz file.
Click to expand...
Click to collapse
I can't extract file .cab and I tried UpTestEX.exe to extract the file .kdz. After i have 2file .dz and .dll. Next, I used DZDecrypt to extract .dz file but display:
Code:
D:\LG>DZExtract -x F180K20K_00.dz
DZExtract v0.2 by jp
Extracting subfiles...
--------------------------------------------------------------------------------
Reading sub-header @0x13c
Checking magic number...........................invalid (found 0xffffffff, exp
ecting subfile, or offset table)
D:\LG>
v0.2? you're using old version, it's for older phone. it has been stated to use v1.0 so grab it from dev section
andwie said:
v0.2? you're using old version, it's for older phone. it has been stated to use v1.0 so grab it from dev section
Click to expand...
Click to collapse
pls sent me link. I know only DZDecrypt is version 1b.
does anyone know how to do the same thing, but from zip to kdz?
as i said, it's all in dev section
phamluong92 said:
pls sent me link. I know only DZDecrypt is version 1b.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2180586
mircea89fzr said:
does anyone know how to do the same thing, but from zip to kdz?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2179431
andwie said:
as i said, it's all in dev section
http://forum.xda-developers.com/showthread.php?t=2180586
Click to expand...
Click to collapse
I've read that thread before. But I can not unzip the file. Cab with 7zip or winrar.
In case 2, used to extract UpTestEX.exe. KDZ ->. dz, I can not unzip it. 2 dz by DZextract and DZDecrypt tool.
The reason is that the OS version or ROM version?
Sorry, I just recently see that you're trying to extract F180 (Optimus G)'s firmware. These methods are only for first generation of L series (L3, L5, L7). It certainly won't work on newer phones. (Yes, although the format is still kdz, the extracting method will differ between devices).
if i extract/ convert a kdz file to a zip zom can i install it in virtualbox
i installed android 4.3 on virtualbox so can i use my phone firmware on my pc??
another method for use my phone firmware on my pc?
thanks bro!
AXD96 said:
if i extract/ convert a kdz file to a zip zom can i install it in virtualbox
i installed android 4.3 on virtualbox so can i use my phone firmware on my pc??
another method for use my phone firmware on my pc?
thanks bro!
Click to expand...
Click to collapse
No. You don't use anyone ROM in computer. You only can mod, cook it. Demo just on the phone. The dev-app can use Android Studio/eclipse.
phamluong92 said:
No. You don't use anyone ROM in computer. You only can mod, cook it. Demo just on the phone. The dev-app can use Android Studio/eclipse.
Click to expand...
Click to collapse
help! notice the img
ATTACH FILES
Guys, I said earlier - open cabinet file with Windows Explorer, NOT WINRAR OR 7ZIP!
nice i would also want it
Can i use this guide to convert a stock LG kdz into a zip?
which is your phone model?
Sent from my LG-P700 using xda app-developers app
I extracted the Sprint LG G5 TOT file using this tool http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830 and got a bunch of .mbn files (recovery.mbn, aboot.mbn, etc). What can I do with these? Does this help anything with rooting?
you can study and reverse them to find an exploit used to root or unlock.
but you could have also done that with with partitions already posted for the other G5 models.
if unlocked and rooted the partitions would be used to make flashable stock zips n such.
Fredo2000 said:
I extracted the Sprint LG G5 TOT file using this tool http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830 and got a bunch of .mbn files (recovery.mbn, aboot.mbn, etc). What can I do with these? Does this help anything with rooting?
Click to expand...
Click to collapse
you can trash all
files extracted are not good.
Check size ...
wolfgart said:
you can trash all
files extracted are not good.
Check size ...
Click to expand...
Click to collapse
Ah good point... thanks!
First of all there is a guide already for some devices made by pvineeth97 so if you have one of those devices, you better use his description:
http://forum.xda-developers.com/lg-k10/how-to/guide-upgrade-downgrade-lg-k10-t3488250
Secondly this guide is not meant to be providing kind of a "one click" method. This guide is meant to provide you info about how to make lg up recognize your device.
You need a working LG Bridge (this would mean that you installed all the necessary drivers already).
Also download a firmware for your device, you can use this guide by Kappu:
http://forum.xda-developers.com/lg-k10/how-to/guide-downloading-kdz-lg-bridge-t3504497
Extract LGUPc.dll from your kdz file using lg firmware extractor (http://viid.me/qe7ufH) or if you use Kappu's guide there is also a folder you can find this dll file.
Rename LGUPc.dll to LGUP_8916.dll
Get LG UP lab version (1.10) (you can find it on xda)
After you installed it, do not run it.
Put LGUP_8916.dll into folder:
"C:\Program Files (x86)\LG Electronics\LGUP\model\8916"
Download (http://viid.me/qe7ijc) or make your own reg file consisting these lines:
[HKEY_CURRENT_USER\SOFTWARE\LG Electronics\LGUP\Model\K35010e]
"DLL_PATH"="C:\\Program Files (x86)\\LG Electronics\\LGUP\\model\\8916\\LGUP_8916.dll"
"MODEL_NAME"="K35010e"
[HKEY_CURRENT_USER\SOFTWARE\LG Electronics\LGUP\Model\K35010e\Provision]
"BIN File"=" "
name it: "k350n_.reg" or whatever device you have (mine is k350n)
as you can see in the reg file there are three instaces of "K35010E". This is my device "id".
If you have a different device (which is rather likely) you will need to use it's "id". Firstly you can chose it from the name of the kdz (the first 4-8 characters of the kdz filename).
Now import this entry to registry (double click on the ".reg" file).
Later on when you try to connect your device and start lg up it will show you a small window (Model List) and if in that window in the first column (under "model") it sais "unknown" then in the next column ("Com ports") you can read the device "id" you have to use, right after the com port (eg. COM4, K35010e).
So change all instaces of "id" regarding to your devices "id" and import the reg file again.
Also you can download pvineeth97 reg files to see how they work and prepare your own.
Now put your phone into download mode (turn it off, hold vol+ button and connect to usb).
Once its connected and all drivers seems to be properly installed you can run LGUP. See above what to do when you have the unknown model error.
When your phone is properly connected, you can chose the proper kdz file and flash it (refurbish -> start).
Sometimes phone reboots twice so don't get scared after the first boot up this might reboot rigth after.
All data will be lost if you use refurbish mode! Optionally you can try using upgrade mode so you will not lose any data however might not solve your problem.
Sometimes when the second time you use it the device id changes so when you have that unknown device error message you have to change the "id" accordingly and add it to registry again (update the reg file and double click).
No promises and no responsibility by me...
In case of 10g firmware (K8, k350n) uncompress and put this file (http://viid.me/qrKdHT) into "C:\Program Files (x86)\LG Electronics\LGUP\model\10g" folder and uncompress and add this dll file (http://viid.me/qrKdVX) to registry (double click and allow adding it).
@gottlasz
how about k10 430dse?
lg up shows unknow model
a_lewicki said:
@gottlasz
how about k10 430dse?
lg up shows unknow model
Click to expand...
Click to collapse
and there is another column next to unknown model (on the right, under COM ports), what is written there? Maybe post a screenshot if you can.
gottlasz said:
and there is another column next to unknown model (on the right, under COM ports), what is written there? Maybe post a screenshot if you can.
Click to expand...
Click to collapse
http://imgur.com/a/R4vZ7
and i don't know how i must name dll file. it could be any name like LG_9999.dll?
ok i do it
sorry for any problems
---------- Post added at 03:45 PM ---------- Previous post was at 03:22 PM ----------
if anybody search for dll for k430dsE here it is
https://drive.google.com/file/d/0B7IBYRXpcuKkN0VZakU4OFQ1SmM/view?usp=sharing
a_lewicki said:
ok i do it
sorry for any problems
---------- Post added at 03:45 PM ---------- Previous post was at 03:22 PM ----------
if anybody search for dll for k430dsE here it is
https://drive.google.com/file/d/0B7IBYRXpcuKkN0VZakU4OFQ1SmM/view?usp=sharing
Click to expand...
Click to collapse
Now it Works? did you make the reg file for your device? would you post it here, so i can add it to the OP?!
Here's dll and reg file so you can add https://drive.google.com/file/d/0B7IBYRXpcuKkN0VZakU4OFQ1SmM/view?usp=sharing
Will this same method work for LG K-10 428?
Can someone please upload a link to MetroPCS LG K-10 in order to downgrade from marshmallow to lollipop. At least it should be ms42810b
Sent from my LG K10 using XDA Labs
GraphMatix said:
Will this same method work for LG K-10 428?
Can someone please upload a link to MetroPCS LG K-10 in order to downgrade from marshmallow to lollipop. At least it should be ms42810b
Sent from my LG K10 using XDA Labs
Click to expand...
Click to collapse
Maybe you find lollipop firmware here: https://forum.xda-developers.com/lg-k10/development/stock-versions-model-lg-k10-t3457319
and then you can use the guide from the OP to use lg up to downgrade your phone.
Does LG UP allow flashing ALL of the original software?
I need to revert my LG K8 to full stock (seems like newest SuperSU messed up some things) and guess what... LG Bridge doesn't wipe all SuperSU components. I've tried wiping Cache, Data and even System and reinstalling via LG Bridge on top of that and still there is /supersu directory and I cannot receive OTA to 6.0.1. I guess it must be boot image that somehow is left untouched by LG Bridge. I just hope that kdz downloaded by LG Bridge contains all necessary stuff...
Darkos333 said:
Does LG UP allow flashing ALL of the original software?
I need to revert my LG K8 to full stock (seems like newest SuperSU messed up some things) and guess what... LG Bridge doesn't wipe all SuperSU components. I've tried wiping Cache, Data and even System and reinstalling via LG Bridge on top of that and still there is /supersu directory and I cannot receive OTA to 6.0.1. I guess it must be boot image that somehow is left untouched by LG Bridge. I just hope that kdz downloaded by LG Bridge contains all necessary stuff...
Click to expand...
Click to collapse
Yeah, i was also suffering a lot with lg bridge... LgUp works great though. Totally clean install. And yes, that kdz contains everything you need.
@gottlasz I don't get it, what it means "8916"???
Should my series K10 430DSY had a same code?
Thanks.
iqoq said:
@gottlasz I don't get it, what it means "8916"???
Should my series K10 430DSY had a same code?
Thanks.
Click to expand...
Click to collapse
it's just a folder name... you can name it whatever you want (like it could be "k10430dsy") just use your folder name accordingly at all instances of 8916... and of course you have to make that folder in the up/model instead of 8916
(i used this folder name because if you use the "factory" installer of the phones for lg up it makes such folders...)
gottlasz said:
it's just a folder name... you can name it whatever you want (like it could be "k10430dsy") just use your folder name accordingly at all instances of 8916... and of course you have to make that folder in the up/model instead of 8916
(i used this folder name because if you use the "factory" installer of the phones for lg up it makes such folders...)
Click to expand...
Click to collapse
Alright, thanks for your guidelines.
I'll try and report here if any issues or success.
iqoq said:
Alright, thanks for your guidelines.
I'll try and report here if any issues or success.
Click to expand...
Click to collapse
Sure, let me know if you have any more questions!
gottlasz said:
Sure, let me know if you have any more questions!
Click to expand...
Click to collapse
Hi bro! I've got this error when connected my K10 430dsy.
What do you think?
iqoq said:
Hi bro! I've got this error when connected my K10 430dsy.
What do you think?
Click to expand...
Click to collapse
I guess the .dll file taken from your kdz is not in the folder or has a different name from which is given in the .reg file.
Check the .reg file and edit it accordingly or put the .dll file to the rigth place with the right name.
If you can't make it work, send me your .dll and .reg file and i'll make it for you.
gottlasz said:
I guess the .dll file taken from your kdz is not in the folder or has a different name from which is given in the .reg file.
Check the .reg file and edit it accordingly or put the .dll file to the rigth place with the right name.
If you can't make it work, send me your .dll and .reg file and i'll make it for you.
Click to expand...
Click to collapse
Hi bro,
Thanks for your support.
Please find the attached files as your request.
Thanks again!!
iqoq said:
Hi bro,
Thanks for your support.
Please find the attached files as your request.
Thanks again!!
Click to expand...
Click to collapse
Put the dll file from the zip i attached into the "C:\Program Files (x86)\LG Electronics\LGUP\model\8916" folder and just double click the same reg file you sent me.
Let me know if it's still not working!
i want to flash my note 4 using "qfil" but it required a rom in (.mbn) file , and i have one with (tar.md5) , so can i find a rom in (.mbn)
or is there a way to convert (tar.md5) to (.mbn)
Odin is not detecting QFIL is
Adriel David said:
Try odin for flashing
Click to expand...
Click to collapse
Saw this post when trying to find my hard bricked solution. My phone is dead no lights nothing. When I put the battery in and connect I am getting Qualcomm as stated in all the posts 9008.
It is detected using QFIL but I do not have the correct files I believe. I need
rawprogram0.xml
patch0.xml
prog_emmc_firehose_xxxx.mbn
I am not sure what to do here. I have downloaded some files but I believe the wrong phone type.
Help...... please
On the same path
nounou2016 said:
i want to flash my note 4 using "qfil" but it required a rom in (.mbn) file , and i have one with (tar.md5) , so can i find a rom in (.mbn)
or is there a way to convert (tar.md5) to (.mbn)
Click to expand...
Click to collapse
I am in a similar situation as you. What I found out is that the *.tar.md5 file can actually contain mbn files. I used winrar to extract them. It still did not do the trick for QFIL as it is missing the xml files.
nounou2016 said:
i want to flash my note 4 using "qfil" but it required a rom in (.mbn) file , and i have one with (tar.md5) , so can i find a rom in (.mbn)
or is there a way to convert (tar.md5) to (.mbn)
Click to expand...
Click to collapse
Did you ever find the XML files?
I have the same exact problem and was going to extract the mbn from a stock rom, but that's pointless without them.
Hello, i have a xt1640 that after flash this firmware: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 is without network, imei two is corrupted(is 60178888153A08) and radio not turn on. It is happening because my software channel is timbr? something related to baseband? Will I only be able to correct this if I pick up a device with the timbr software channel to backup and flash on in this phone? In the configurations it is recognized as moto g4 plus, the sensor of digital prints and wifi work, the only thing not working is the network.
Sorry for my bad english, i'm brazilian. it's my first post on xda so sorry about anything.
AnonyWorld said:
Hello, i have a xt1640 that after flash this firmware: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 is without network, imei two is corrupted(is 60178888153A08) and radio not turn on. It is happening because my software channel is timbr? something related to baseband? Will I only be able to correct this if I pick up a device with the timbr software channel to backup and flash on in this phone? In the configurations it is recognized as moto g4 plus, the sensor of digital prints and wifi work, the only thing not working is the network.
Sorry for my bad english, i'm brazilian. it's my first post on xda so sorry about anything.
Click to expand...
Click to collapse
I think U have flashed incorrect frimware of ur device which lead to beraking of imei try to flash correct frumware . When tge imei will repair ur phn will get network signal
Love Dhir said:
I think U have flashed incorrect frimware of ur device which lead to beraking of imei try to flash correct frumware . When tge imei will repair ur phn will get network signal
Click to expand...
Click to collapse
Hello, thank you for answer. I'm solved this error with this thread: https://forum.xda-developers.com/moto-g4/how-to/baseband-change-t3762270/post75988960#post75988960
AnonyWorld said:
Hello, thank you for answer. I'm solved this error with this thread: https://forum.xda-developers.com/moto-g4/how-to/baseband-change-t3762270/post75988960#post75988960
Click to expand...
Click to collapse
You have to flash the zip through TWRP ?
Heyner_Gomez said:
You have to flash the zip through TWRP ?
Click to expand...
Click to collapse
No, in this zip have a two files, one .bat for windows and one .sh for linux. If you use windows, open the .bat file with an editor and go to six line "SET fastboot=" and change the patch of you fastboot files(the folder of you fastboot), after that execute the .bat and follow the steps .
AnonyWorld said:
No, in this zip have a two files, one .bat for windows and one .sh for linux. If you use windows, open the .bat file with an editor and go to six line "SET fastboot=" and change the patch of you fastboot files(the folder of you fastboot), after that execute the .bat and follow the steps .
Click to expand...
Click to collapse
You can edit it and you can pass it to me please.
The folder of fastboot is on the desktop...
Heyner_Gomez said:
You can edit it and you can pass it to me please.
The folder of fastboot is on the desktop...
Click to expand...
Click to collapse
Move or copy you folder to c disk and rename to fastboot. Download .zip and extract in c disk and execute.
AnonyWorld said:
Move or copy you folder to c disk and rename to fastboot. Download .zip and extract in c disk and execute.
Click to expand...
Click to collapse
thanks friend:good:
Heyner_Gomez said:
thanks friend:good:
Click to expand...
Click to collapse
Worked?
AnonyWorld said:
Worked?
Click to expand...
Click to collapse
Use this method.
https://forum.xda-developers.com/showpost.php?p=76406797&postcount=11