Related
Credits to sakurawarskula for this epic rom.
Thread: anzhi.com
Theming works
No root problems, like there is with other MIUI roms
Great battery life
Superb 3D performance
Everything works
If you want more info, go to official thread, and translate it.
Instalation:
Code:
be sure you are on official gingerbread or gb bassed custom rom.
boot into recovery,reboot recovery
wipe data/factory
wipe cache
wipe dalvik
wipe battery stats
format system
reboot into recovery
Do the same wipes again for a second time
install the rom
reboot normally
reboot into recovery and install ''20130101_U8800Pro-MIUI2.3.7 by FCS fix 20130104-12_update.zip''
reboot normally
reboot into recovery and install atmel fix zip (if you are on atmel)
reboot normally
reboot into recovery and install geno's gapps
reboot normally play a bit with the new rom
reboot normally again
Links:
ROM: http://www.mediafire.com/?hi637716r3dkua7
Final patch (the only one needed):http://www.sendspace.com/file/li9b3c
- atmel fix patch : http://www.sendspace.com/file/7f5nkr (only for those with atmel screen,check previous posts) (install in recovery)
- geno's gapps : http://www.sendspace.com/file/ynvpky (install in recovery)
- flash player : http://www.sendspace.com/file/h6p3mo
- new miui compass : http://www.sendspace.com/file/4x6are
- english versions of system apps (where needed) : http://www.sendspace.com/file/vwtiw8 (place in /system put correct permissions,move to system/app and replace,reboot) compass and flash player can maybe be installed normally,i don't remember. (THIS IS NOT A FLASHABLE ZIP,unzip manually)
- full translated changelog from Sakura (from google translate,needs some imagination..!) : http://www.sendspace.com/file/pm7gtv
- Hosts file from Kalo rom (needed to connect properly to google account) : http://www.sendspace.com/file/nuodvz (move to /system put correct permissions,move to /system/etc replace,reboot)
- gps.conf for EUROPE users : http://www.sendspace.com/file/x94ct0 (same installation as hosts file)
BONUS : Kick ass theme --> MeeUi,try it! : http://www.sendspace.com/file/gkeaxz Move to sdcard/Miui/themes and install from theme manager
To change to english when first installing press menu button,then the gear icon button,then the second panel from the 3,then in new screen the keyboard icon.
If you want to light up buttons, do this:
With root explorer go to /system/etc/init d and delete (or save somewhere in case you change your mind) the file ''Z90closeButtonLight'' .Reboot.Let the lights hit you!
What languages are present?
I left build.prop as is, so language is chineese, but you can change it trough settings to english. There are no aditional languages.
How much free RAM?
Moribus said:
Credits to sakurawarskula for this
How to install:
1. make sure you have 2.3 based rom
2. download the ROM put it into memory card
3. install it with recovery
4. install all 7 fixes
5. reboot
Click to expand...
Click to collapse
I have downloaded the ROM from original site and flashed as per your recommendations in STALLION thread. It's great. I have some queries.
1. There were five patches whereas you have given seven.
2. How do you lock the screen? Is it only to be locked with POWER button. I use third party screen lock app tied up with long press search button which is not working here as this function is tagged with camera. Any alternative for screen lock?
Didr said:
How much free RAM?
Click to expand...
Click to collapse
140-160mb
parthabhatta said:
I have downloaded the ROM from original site and flashed as per your recommendations in STALLION thread. It's great. I have some queries.
1. There were five patches whereas you have given seven.
2. How do you lock the screen? Is it only to be locked with POWER button. I use third party screen lock app tied up with long press search button which is not working here as this function is tagged with camera. Any alternative for screen lock?
Click to expand...
Click to collapse
1. Sorry, i made a mistake, there are only 6 of them, not 7. I dont know why u have only 5, and it doesnt realy matter.
2. I dont use any buttons to lock, screen timeout locks itself, or i use power button, but if u want, u can use search button, by doing this:
System Settings>System>Button>MI button>Trigger Toggle>Lock
parthabhatta said:
I have downloaded the ROM from original site and flashed as per your recommendations in STALLION thread. It's great. I have some queries.
1. There were five patches whereas you have given seven.
2. How do you lock the screen? Is it only to be locked with POWER button. I use third party screen lock app tied up with long press search button which is not working here as this function is tagged with camera. Any alternative for screen lock?
Click to expand...
Click to collapse
I installed this rom yesterday from the chinese sources,you don't need all the 6 patches.There are 5 update patches and the 6th is the one you need,this is the final patch that includes ALL the other ones (20130101_U8800Pro-MIUI2.3.7 by FCS fix 20130104-12_update.zip)
to OP:There are 4 other files that came with the rom and i don't see them in the post.They are Sakura's Atmel screen fix,geno's gapps,flash player for this rom and the new miui compass that was not included in the original rom.If you don't have them tell me to upload them
If you want to put power button to search button go with root explorer to system/usr/keylayout open qwerty.kl with text editor,find key 217 and change it from ''CAMERA'' to ''POWER' and in the same line from ''WAKE DROPPED'' to ''WAKE'' .Save and reboot.Now pressing the search button closes the screen,long pressing it brings up the power menu.
People this is the best MIUI so far and the latest one with final release date 14/1/2013,Everything works.This is a special rom started by Geno,then Hay modded it,then Ry09iu modded it farther and lastly Sakura combined the mods of all of them together with his own and released this amazing rom.you got to try it
---------- Post added at 12:51 PM ---------- Previous post was at 12:44 PM ----------
Didr said:
How much free RAM?
Click to expand...
Click to collapse
No worries about ram unless you have 200apps installed like all roms
installation:
be sure you are on official gingerbread or gb based custom rom.
boot into recovery,reboot recovery
wipe data/factory
wipe cache
wipe dalvik
wipe battery stats
format system
reboot into recovery
Do the same wipes again for a second time
install the rom
reboot normally
reboot into recovery and install ''20130101_U8800Pro-MIUI2.3.7 by FCS fix 20130104-12_update.zip''
reboot normally
reboot into recovery and install atmel fix zip (if you are on atmel)
reboot normally
reboot into recovery and install geno's gapps
reboot normally play a bit with the new rom
reboot normally again
THIS IS THE BEST WAY
You also need to replace some chinese system apps with the english ones,i will upload them later with instructions
and also replace some files like hosts,gps etc.i will upload them too.
please OP add these to the first post because there will be confusion!
Moribus said:
140-160mb
1. Sorry, i made a mistake, there are only 6 of them, not 7. I dont know why u have only 5, and it doesnt realy matter.
2. I dont use any buttons to lock, screen timeout locks itself, or i use power button, but if u want, u can use search button, by doing this:
System Settings>System>Button>MI button>Trigger Toggle>Lock
Click to expand...
Click to collapse
Thanks it works.
korekore1 said:
to OP:There are 4 other files that came with the rom and i don't see them in the post.They are Sakura's Atmel screen fix,geno's gapps,flash player for this rom and the new miui compass that was not included in the original rom.If you don't have tell me to upload them
Click to expand...
Click to collapse
Upload them if u can, ill add them to first post.
To korekore.
Great post. Very supportive.
I agree to you with first point. Five patches replaced by one single patch and I am using the same.
I will surely try your method OF search key lock /power button. I will surely try that.
Lately there are four more files of which I am using the gapps lite. My touch screen send to be working ok and I have not flashed the atmel kernel mod. BTW how to know whether I have a ATMEL or SYNAPTICS hardware?
Lastly waiting for Your English version apks.
Great ROM. Dream of similar JB ROM.
Thank you.
parthabhatta said:
To korekore.
BTW how to know whether I have a ATMEL or SYNAPTICS hardware?
Thank you.
Click to expand...
Click to collapse
On your phone dialer you dial *#*#2846579#*#*
A menu will appear,then you go to project menu->upgrade->touchscreen firmware upgrade->touch screen version query and it will show you if it is ATMEL or SYNAPTICS.
Be aware however that this menu does not appear on all custom roms. For example in CM7 if you try it, nothing will happen.
For what is this FIX?
For me the 4 button does not lighting
Sent from my U8800pro using Tapatalk 2
dingila said:
For what is this FIX?
For me the 4 button does not lighting
Sent from my U8800pro using Tapatalk 2
Click to expand...
Click to collapse
That fix improves speed, stability, adds V6 SuperCharger script, improves power saving, etc.
No button backligt is not a bug, but you can "fix" it by doing this:
Download any root exploring app, go to sys>class>leds>button-backlight> edit it like text, and write 255>save it
@ntonius said:
On your phone dialer you dial *#*#2846579#*#*
A menu will appear,then you go to project menu->upgrade->touchscreen firmware upgrade->touch screen version query and it will show you if it is ATMEL or SYNAPTICS.
Be aware however that this menu does not appear on all custom roms. For example in CM7 if you try it, nothing will happen.
Click to expand...
Click to collapse
Nothing happened with the command in the current ROM.
Sent from my U8800pro using xda premium
R: [ROM 2.3] MIUI - 3D performance + smooth + power saving + stable
Can someone upload screenshots? Thanks
Sent from my U8800Pro using xda app-developers app
parthabhatta said:
Nothing happened with the command in the current ROM.
Sent from my U8800pro using xda premium
Click to expand...
Click to collapse
Yes,I tried it too on MIUI but like CM7 it doesnt work in these roms. It works on official/stock rom 100%, i checked it on my official rom before installing this MIUI.
If you have a recovery backup of the stock/official rom you can restore the official rom and try it there, it will work there 100%.
Which kernel to b flashed for this Rom?
Sent from my X10i using xda premium
if anyone use it let's tell us if this rom is for one day or for often use and someone please post screenshots
korekore1 can you upload the four files you were talking about before and the final patch?
Thank you.
Screenshots
Sent from my U8800pro using Tapatalk 2
Guys I am Back with new Rom :highfive:
Note This Rom is neither Compiled by me nor Developed By Me
All credits Go to Mr Divis 1969
I am posting This here Because Many people are unknown about a Russian Forum 4pda
Let me introduce this Rom :fingers-crossed:
Lineage OS Also known as Successor of CynogenMod
$Noobs keep distance$
Requirements
$Unlocked bootloder with Custom recovery users only$
Bugs and how to solve them
$Note After flashing lineage os a prompt will come to root your OS don't tick it otherwise your rom will not boot up (will be bootloop)$
Then How to root Lineage OS See below. :good:
Rom download link :good: :good:
https://github.com/divis1969/android_device_meizu_meilan2/releases/tag/los-14.1-meilan2-v0.45
G-Apps :good: :good:
https://drive.google.com/open?id=0Bz6Fq2POoJTlcWttbFhTRTJacGM
Google Assistant Mod :good: :good:
https://drive.google.com/open?id=0Bz6Fq2POoJTlRVJYeU9xMkowdlE
All In One Patch
https://drive.google.com/open?id=0Bz6Fq2POoJTlRzB0bURTMGdrWk0
90 Overlay Fix
https://drive.google.com/open?id=0Bz6Fq2POoJTlQzVxSW9MWndNams
Battery Status Fix
https://drive.google.com/open?id=0Bz6Fq2POoJTlbi1OZUdrV3BUX1E
SOURCES
Kernel Sources :good: :good:
https://github.com/divis1969/android_kernel_meizu_meilan2
Vendor Blobs :good: :good:
https://github.com/divis1969/android_vendor_meizu_meilan2
Device Tree :good: :good:
https://github.com/divis1969/android_device_meizu_meilan2
Screen Shots Get It Here :good: :good:
https://drive.google.com/open?id=0Bz6Fq2POoJTlbG5CUHJpUjl1WVU
Review&Bugs
1) Working (Stable)& Features
->Camera (How to make it stable it is given below)
->Ril (No more dropdowns)
->Sensors (Thanks to Divis1969 to fix them)
->Touchscreen
->Live Display
->Hardware Buttons
->SeLinux is set to Permissive
->Double tap to sleep Gesture
->Adaptive Brightness
->Sound(Low but can be fixed see below
->Bluethooth
_>MTKGPS(don't grant permission for camera)
->Wifi (Buggy see down)
2)Not working(Not fixable)&Solvable for some
->Some apps may force close randomly (Just neglect it.It will work when you open it)
->Battery (Indicator unstable For fix see below)
->Video recording in camera (Fixed Almost with Video patches See below for More Info)
->Flashlight with photos (sometimes it works and sometime its hangs so better not to use it while taking photos)
->Wifi (Can connect password protected network but cant connect open wifi)
Bugs and its solution in FAQ section
1)Can Camera Can Be Fixed?
Ans)Yes just make sure you dont grant gallery app and camera app location permission when it asks for it.
2)Camera of stock rom is black and camera of flyme doesn't work well solvable?
Ans)Yes for camera and for video recording download Footej app from here
http://www.apkmirror.com/apk/semaphore-inc/footej-camera/footej-camera-2-0-0-build-81-release/footej-camera-2-0-0-build-81-android-apk-download/
Use it only From now Avoid Using Other Camera Apps (For photos& video shooting)
(Don't grant location permission if asked by any camera app) make it default
3)Battery Indicator problem solution?
Ans)Yes it is there
Download Battery calibrator from playstore
Charge your phone for whole night after applying rom
then open app select calibrate and unplug and enjoy
Direct link
https://play.google.com/store/apps/details?id=com.nema.batterycalibration
4)Audio is very low any fix?
Ans)Yes use Dolby Atmos.zip download it from here and activate it.
Download it and flash it via TWRP
link
http://forum.xda-developers.com/devdb/project/dl/?id=13100
If you want to remove it download uninstaller.zip
http://forum.xda-developers.com/devdb/project/dl/?id=13553
5)Google Assistant possible?
Ans)Yes download this zip and flash it via twrp and enjoy
*Note*Middle button to activate Google assistant not working set it up and say Ok Google and it will be activated
Or Shortcut on lockscreen will be Created
Download link
https://www.androidfilehost.com/?fid=385035244224414620
6)Substratum themes support?
Ans)Yes but partially it works but not fully compitible
Lineage os works on Legacy mode so Substratum themes after applying phone need to be restarted
If you get bootloop after applying Substratum theme there are 2 files in file in Substratum folder of internal storage of device known as
SubstratumRescue_Legacy.zip
SubstratumRescue.zip (Risky It dont work Mainly For Legacy Mode Users)
Flash it from Recovery and get your device back
7)How to root this OS?
Ans)Download Super su.zip from here
https://mirrorbits.lineageos.org/su/addonsu-arm64-signed.zip
flash it via twrp
reboot then go to setting then Select About Phone
then tap on Build number on 4,5 times
it will make a menu open Developer options
go back and open Developer options
drag down select Root Access
select apps and ADB (ADB is optional if you want)
but it will be useful so tick it
8)Video recording showing black screen any fix for it?
Ans)Yes but this patch will make video playback lags so better you use MX player Patch Created By Crezil1
Video Patch v1 link
https://drive.google.com/file/d/0Bz6Fq2POoJTlY0VPaWpmeG9fTzg/view
flash it via TWRP
Also Flash This Patch After v1 Also known as v2 Patch
https://drive.google.com/open?id=0Bz6Fq2POoJTlRng3R0oyRFVhUU0
Flash this too via twrp This will make Camera 80% Bugless
Video Shooting+Taking Pictures Both Works
9)Instagram &FB live working?
Ans)Yes it is if you can't use front camera reboot and try
10)What is All In One Android 7 Patch and 90 Overlay and Battery status fix?
Ans)All In One Android 7 patch Contains fix for
1)Flashlight while taking photos
2)HDR
3)Black Screen On Youtube (Via 90 Overlay Zip)
Battery status fix will solve problem of battery draining from 15% to 5% quickly Known as Direct DropDown
Installation Flash them all Together or separately via TWRP
that's all!
If i am still missing any point or you have a bug kindly report me Will forward it to Divis1969
I Hope i had cleared all doubts of your about Lineage os With this mods& patches it become 80% Bugless rom
In Last What About Custom Kernel?
Yep As said It is Available for Lineage OS too Qus1 Rocks
Download It Now From Here
https://yadi.sk/d/79Ha6NU83GZYVb
Custom Kernel Features
Presenting you the New Innovative Big.Little Custom kernel For Meizu M2/Mini :laugh:
1)You can modify vibrations level of your device
2)You can enable double tap to wake and double tap to sleep in any rom
3)Can modify frequency of CPU
4)Cpu governers like Interactive plus,ThunderX included
5)Can tweak for IO schedulers
6)Low memory killer
Why it is powerful and How it is useful see it here here
https://www.arm.com/products/processors/technologies/biglittleprocessing.php
this is latest technology for Arm devices (support x64bit socs too)
Report Me Additional Bugs if you found i will submit them to Divis1969 :silly:
Press Thanks If you think it is usefull :good: :good: :good:
Regards~
Murtaza Piplod :angel:
Edit: I am very very sorry guys GPS works 100% (can be used for any app)but problem is with
Camera Libraries are affecting GPS request so i will update my all rom post so that user can know about this
Bug is with Camera (GPS works fine i misunderstood the bug)
Please forgive me
Gps can be used in maps and other app just make sure don't grant camera app permission and gallery app too Thanks
Post updated Guys kindly look in the last of the post
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the NitrogenOS Q&A Megathread. Here you can find answers for the most popular problems and questions about NitrogenOS. I started this thread, so that new users don't repeatedly ask the same questions multiple times. While I am fairly new to coding in Java, I can definitely say I know a lot about Android phones and NitrogenOS, but you'll have to trust me on that. If you need any more help, you can even PM me and I'll try to reply as soon as I can.
You can find the original NitrogenOS thread here.
ROM info
Developer: xyyx
Latest Android version: 8.1 Oreo
NOS Download (latest): https://sourceforge.net/projects/nitrogen-project/files/kenzo/kenzo_test/8.1/
Bugs and updates
- A (very) small amount of users reported Google Dialer not working properly while installed through OpenGapps or the Play Store, you can still use stock dialer
1. Test or stable?!?!
Test in this case doesn't mean less stable. xyyx named the two versions a little confusingly.
Test means Oreo (Android 8.0 and 8.1) and Stable means Nougat (Android 7.1.2).
So let's make this a little less confusing:
Oreo (8.0) builds -> Download from here
Oreo (8.1) builds -> Download from here
Nougat (7.1.2) builds -> Download from here
2. Youtube PiP (Picture in Picture mode)
Google has patched PiP a long time ago, so it doesn't work with the latest Youtube releases. The last official release working with PiP is 12.34.55, which you can download from ApkMirror.
My preferred option however is iYTBP (injected YouTube Background Playback), a modified version of Youtube, but it gets a little confusing as there are multiple options.
You can download it from this thread.
Now the tricky part - choosing the right version. I always prefer the Vanced version, which can be found in the 2nd post. Again you have multiple options, but I will not go through all of them since they are explained pretty good in the post itself. While iYTBP enables PiP, it also blocks ads and adds a lot of useful settings and new updates come very frequently. There are multiple installation methods, but I prefer the Magisk one, since it offers options like detaching the Youtube app from Play Store. What this means is, that you don't have to disable auto-updates and it will not bug you to constantly update it.
You can try these methods:
Magisk Module (Easiest):
1. Open Magisk Manager
2. Go to Downloads
3. In the search bar type "Youtube", you should see two results
4. Choose either the normal or the black theme (I personally prefer the black one)
5. Press the download arrow and then "Install"
6. Wait for a while (it's a big package to download and unpack)
7. Reboot
This is by far the easiest option and the module is updated fairly often.
Manual:
1. Delete or uninstall any previous release of Youtube. If you installed it as a system app, disable it or delete the /system/app/YouTube folder. If you had to delete the folder, reboot.
2. Download the Youtube apk
3. Make a folder called YouTube (watch the caps!)
4. Move the apk to this folder and rename it as YouTube (again with the caps)
5. Copy/move the folder to /system/app (The directory should look like this: /system/app/YouTube/YouTube.apk)
6. Reboot
Magisk (manual):
1. Download the Youtube apk, the iYTBP universal installer and the use_this_settings.sh file. Check that they are in the downloads folder.
2. Edit the use_this_settings.sh file if you want. Since we're installing from Magisk, you'll need to set MAGINSTALL to YES (MAGINSTALL="YES"). I usually also enable detach (DETACH="YES"). This will make the Play Store think Youtube isn't installed and it will not bug you for updates.
3. Open Magisk Manager, go to Modules and press the + button. Now select the universal installer zip and flash it in Magisk.
4. Reboot
Recovery method:
Same as for Magisk, but MAGINSTALL is set to NO (MAGINSTALL="NO"). In case you didn't read the Magisk method, here is the recovery method...
1. Download the Youtube apk, the iYTBP universal installer and the use_this_settings.sh file. Check that they are in the downloads folder.
2. Edit the use_this_settings.sh file if you want. I usually enable detach (DETACH="YES"). This will make the Play Store think Youtube isn't installed and it will not bug you for updates.
3. Reboot to recovery, go to Install and choose the universal installer zip, flash it.
4. Reboot
If you open a video in fullscreen mode and press the home button, it should open it in PiP mode. If you want to change some advanced settings, you can go to your Account (the round icon with your profile picture) -> Settings -> iYTBP Settings
3. Goodix & FPC - What are they
Goodix and FPC are two different types of fingerprint sensors (or rather sensor manufacturers). They both work in Android 8.1 builds. Custom kernels or mods may break the fingerprint sensor functionality.
4. Rooting
tl;dr: rooting NitrogenOS is the same as rooting any other custom rom, just flash Magisk, SuperSU, phh's superuser or anything else.
Now for the extended version.
Magisk:
Magisk is a great open-source root manager, developed by topjohnwu. It features a feature rich app, but most people prefer it because of it's "modules", packages which can do a bunch of things, from installing apps like Viper4AndroidFX or Dolby Atmos, to modifying system settings, like the volume steps increase. Magisk also features an option called "Magisk Hide", which can bypass Android's SafetyNet.
Check out the Magisk thread.
You can directly download the latest version of Magisk from https://tiny.cc/latestmagisk
SuperSU:
SuperSU is an alternative root manager. It used to be developed by Chainfire, but has recently been purchased by another company. I still prefer Magisk, but SuperSU is a great alternative for new users. My problem with it though is, that it is not open-source and the new buyer is pretty secretive so I don't really trust them.
Check out the SuperSU website for the download link.
phh's SuperUser:
Another open-source root manager, but the great thing about this one is, that it's very minimalistic and very small in size.
Check out the SuperUser thread and phh's Build Bot.
5. Google Apps (gapps)
Google apps are a vital part of custom roms. You might not know this, but AOSP and CM based roms are made from Google source code. Google actually makes Android open-source, but the Play Store and other Google apps are not. That's why roms like NitrogenOS do not come with the Play Store preinstalled. That is where Open Gapps come in. They are prepackaged apps, updated almost daily. They come in various sizes and versions, but they can all be flashed in TWRP like a normal zip file.
Platform: arm/arm64/x86/x86_64 - RN3 has an arm64 processor (Think of it as a 64-bit CPU for phones)
Android: 8.0/7.1/7.0... - This is the android version, NOS is Oreo based so choose 8.0 (Or 7.1 for Nougat) [Check below for OpenGapps 8.1]
Variant: This is where it gets complicated. There are a LOT of versions to choose from. For more in-depth resources check the OpenGapps' package comparison.
But OpenGapps are a lot more customisable, to the level where you can choose individual apps you want installed. The easiest way to do this, is to flash the Aroma package, which enables you to choose exactly which packages you want installed. Another option is to configure any of the selected packages using a gapps-config.txt file. You can learn more about that in the Advanced Features and Options section.
You can download daily builds for any Android version from https://opengapps.org/
6. TWRP (Recovery)
A recovery is a partition, used to flash files like ROMs, gapps and any other modifications. You do (in most cases) need an unlocked bootloader to use it. Unlocking your bootloader will not be described on this thread, as there are a lot of resources for our device.
Official TWRP - This is the official TWRP (Team Win Recovery Project) for our device
You can find the latest updates for TWRP on their website.
Red Wolf - This is a modified version of TWRP, my absolute favourite because of it's custom features.
Flashing TWRP:
If you don't have a custom recovery installed and you have unlocked your bootloader, then download the latest version of your preferred recovery and follow these steps:
1. Download Minimal ADB and Fastboot on Windows, or use sudo apt install android-tools-adb android-tools-fastboot if you're on Linux.
2. Enable USB Debugging (Settings -> About phone -> Press "Build number" 7 times to enable Developer options). You should find the Developer options in settings above "About Device". Find USB Debugging and enable it.
3. Connect your PC to the phone via a cable. Open Minimal ADB and Fastboot (which will open CMD) or Terminal on Linux and type this (same for both OSs): adb devices. Select "Always allow on this computer" and confirm access on your phone.
4. Reboot your phone to fastboot/bootloader (By holding Power and Vol-, releasing the power button after a vibration and holding the Vol- button until you see the Xiaomi mascot).
5. Type (In CMD/Terminal): fastboot devices, to confirm if the phone has been recognised, then fastboot flash recovery /path/to/recovery.img
6. After it has succesfully finished, remove the cable and reboot directly to recovery (Power and Vol+, release power after vibration, but keep holding the Vol+ button until you see the TWRP or RedWolf logo).
If you do already have a custom recovery installed and just want to update it, flash the .img or .zip file in your already installed recovery and select "Reboot to recovery".
7. NOS asks me for a password after flashing?!!?!?
This is actually not NitrogenOS's fault, it's a byproduct of your previous rom, most often MIUI. What this means is, that your internal storage is encrypted and the only way to fix this, is to backup everything on your internal storage, which you can do by connecting your phone to your pc while in recovery. You should be able to access the phone's storage and move the files from there. If you for some reason can't do that, you can still put in an sdcard and copy the files to it in TWRP. Bottom line, backup the files and then go to "Wipe" and find the "Format data" button. You might see a "wipe data" button, but this is not the same. When you "wipe data" you are wiping your system, cache, dalvik cache and data partitions, but formatting data will format your internal partition as well and thus remove the encryption.
You can finally reflash NOS and gapps or whatever other modification you want.
8. Firmwares
Check out this link to download the latest firmware for our device.
What is firmware? - It's what connects hardware to software (don't confuse it with a kernel). It's what, for example, makes the camera work.
Do I really need firmware - Yes (but it's already installed, even after completely wiping the stock rom, since it's on separate partitions).
Do I need the most up-to-date firmware - Actually no, the only difference you will notice is in the signal and WiFi strength. If yours are good enough, you don't need to update, otherwise feel free to download the newest version from the link above.
What is emmc_appsboot.mbn? - It's a bootloader update. Bootloader or fastboot is the partition in which you have unlocked your bootloader and flashed the recovery. If you have officially unlocked your bootloader, then you can flash firmware with emmc_appsboot.mbn, but if you have unofficially unlocked your bootloader, do not flash these files as they will re-lock it. But you can still flash the version without emmc_appsboot.mbn.
Kenzo? Kate? - Kate devices are the same as kenzo ones but are a little bigger.
Some comparisons:
Kenzo
Size: 150 * 76 * 6.85 mm
Weight: 164g
Kate
Size: 152 * 76 * 6.85 mm
Weight: 167g
Model numbers:
Kenzo: 2015116
Kate: 2015161
Kate devices are 32/3 GB, and some kenzo devices are as well (some are 16/2 GB), not really sure about this part.
Global stable or developer? - Most people use developer roms, but again, this is not the actual ROM, just the firmware extracted from the rom, it doesn't really matter which one you choose.
When do I need to flash firmware? - If you're coming from MIUI8 (or 9), then you probably have the newest firmware. In this case you don't need to flash it, because MIUI roms already have firmware included in the update. If you're coming from a CM or AOSP based rom you also probably don't have to flash it, but I suggest you update it just in case. If your signal is good enough though, there really is no need.
9. How to flash the rom
Flashing is pretty straight forward. Just go to the Install section of TWRP and flash it like any normal zip, nothing special.
If you're coming from MIUI, then the full procedure is this:
1. Unlock your bootloader (google it, useless explaining it here)
2. Flash TWRP
3. Make a full device backup (Nandroid backup)
4. Copy or move all important files from the internal storage to an sdcard or your pc
5. Format data, or in other words, wipe EVERYTHING (excluding external storage) - This will delete all your photos and anything else in internal storage
6. Flash the latest NOS "test" build (Oreo)
7. Flash gapps (I recommend opengapps.org, check above)
8. Reboot to system
10. OTA?
What is OTA? - OTA means Over The Air (Update)
Does NOS have OTA? - Actually yes and no, newer updates (from March 2018 on) do have partial OTA (it does check for updates and notify you, while also giving a direct download link to SourceForge, but you will have to manually flash every update in your recovery.
What about incremental updates? - Sorry, but no. You'll have to download full packages every time. If you have a bandwidth cap then just download an update every week or two, you can check the changelog to see if you think it's worth updating to.
11. Google Camera
If you're having problems with the official Google Camera or just want some added features then look no further than modded camera apps. Check out this thread by emime12, it's very frequently updated and features a lot of different camera mods, including Google Camera, MIUI Camera, MOTO Camera and many more.
Recommended settings:
3x3 Grid - For better photos
I usually disable "Save location" and "Camera sounds"
Model: Pixel XL (corr) - default
Config camera HDR+: NEXUS 6
HDR+ parameters: Default
Panorama resolution: High
Advanced: Enable both
Experimental: I usually leave this disabled but it's your choice.
Back camera video resolution: UHD 4K (30 fps)
In case your camera doesn't work check if you have these two files and delete them:
/System/framework/com.google.android.camera.experimental2016.jar
and
/System/etc/permissions/com.google.android.camera.experimental2016.xml
Credits go to: @emime12 and Njaiker.
You can find more info about problems and updates on emime12's thread.
Settings may differ a lot, so check emime12's recommended or just test until you find ones that work for you
12. RAM Management - Low free RAM
Android's RAM (Read Only Memory) management doesn't work like Windows'. Android manages RAM very well, "Free RAM is wasted RAM" is a very common expression on XDA. Android loads the first couple of apps into the RAM and priorities the open one. More used ram means more apps loaded in ram which means faster load times. Don't worry about it too much and just enjoy the fast loading speeds.
13. VoLTE?
VoLTE should work on Android 8.1. Magisk, Viper or any other mods may break it.
14. Custom kernels
While there are a lot of custom kernels, I suggest you stick with the stock one, as it is made specifically for NOS and thus it is the most stable. If you still want a custom kernel, you can try Radon or Agni but they might break VoLTE or your fingerprint sensor.
Agni XDA Thread - By psndna88
Radon XDA Thread - By Umang96
15. Daily driver or not?
Yes, NitrogenOS Oreo is very stable, definitely enough for a daily driver. It is the best Oreo rom for our device (in my opinion), as it offers just the right amount of customization and stability.
15. GPS
Some users have reported low accuracy, but you should be fine if you turn on High Accuracy mode and/or install Faster GPS.
Update: In recent updates GPS shouldn't be a problem anymore as xyyx has fixed it, but some users have still reported low accuracy.
16. Viper4Android FX
(There may be other ways, but I haven't tested them yet so I can't confirm if they work) By far the easiest way to install Viper4Android FX is using Magisk. There is Magisk module called ViPER4Android FX Materialized. Download and install that module from the Magisk repo, choose your preferred installation option (By pressing Vol+ or Vol- to select which version you want installed and if you want it materialized - for newest materialized version press Vol+ 2 times) and finally reboot. Try playing some music and open the Viper app. Turn on the "Master Power" switch and the "Playback Gain Control" (the easiest way to tell if it worked). If after a little time the volume increases, it means that Viper4Android FX works. If not, press the three dots and choose "Exit" (without turning off the master power or gain control). Now open the app again and it should work. You can also check that in the side menu under "Driver status", if it's enabled and processing, then everything works.
You may or may not have to exit and re-enter the app after reboot to enable processing (in my case I had to).
I would show you my recommended settings (as requested), but to be honest I only use:
Headset
Viper Bass (Natural bass, 40 HZ frequency, 8 dB)
Viper Clarity (Natural, 6 dB)
Sometimes I use Field surround with default settings
Phone speakers
eXtra loud (Slight, 4x max gain, -1.9 dB max output)
Bluetooth device
Playback gain control (Moderate, 6x max gain, -1.9 dB max output)
If I'm at a party with my bluetooth speaker I pump it up to Extreme and 8x max gain
Viper Bass (Natural, 40 HZ frequency, 8 dB), 17 dB for parties
Viper Clarity (Natural, 3.5 dB)
I don't use equalizers or if I do, they are song-specific. I also don't USB/Dock, so I can't recommend anything there.
Of course these settings can vary depending on the song, so choose those, which you like the most and don't stick with just those I chose, try all the functions to see which you prefer.
17. AdAway (Root)
AdAway is a great open-source root ad blocker, which can automatically download and update sources and works by adding those to the hosts file. It work well on the internet, but also inside apps (most of the time).
Check out the official AdAway website. You can also download it from F-Droid.
Adaway v3.2 (60) (direct download link)
Adding custom host sources:
Go to "Host sources" and add your own sources or check out these: AdAway's host sources
Be careful when adding all of them, since some can block legitimate links like goo.gl.
AdAway also offers an option to scan for Adware, which can be found under "Scan for adware". This will bring up a new window, press "Start scanning". If you don't need/want the mentioned apps you can uninstall them, but AdAway can't block their ads.
You can also check out my recommended settings:
wow,really appreciated that sir., it is very helpful specially for those who wanted to try, flashing rom or any mods on their device like me. thanks and keep up the good work sir God bless!
i think i can add up little bit here.
1) u r on miui & u want to flash nitrogen so u go to recovery and backup ur current rom in case if u dont like nitrogen u can restore back to miui with all ur setting & app. now assume u r on nitrogen, after 4-5 days u dont like nitroge & u decided to come back to miui, so u go to recovery and restore yr backup that u have taken earlier. after success booting the screen with pin or password will appear. so u would enter/guess any previous password, pin u used earlier but it will not open. here the real problem come. i have also faced same issue & got upset searching endless solution on google . u will get mad on u. security bypass will also not work. after spending endless hour i come with solution. download aroma zip search on net. flash it through recovery this will help u to get in system its ike file manager. then head to data, system and delete all file u see below
locksettings.db, locksettings.db-shm, locksettings.db-wal, gatekeeper.password.key, gatekeeper.pattern.key
and then restart, yr problem would be solve.
2) nitrogen os does not support video calling via jio. none custom rom other then then miui support.
3)xposed is not available for oreo.
4)i have used nitrogen oreo for about 2 weeks it is stable but not as miui. some time r net would not work, jio call drop, lagging u have to restart on every time u faced problem. i suggest that wait for some time to roll out nought port for kenzo with zero bug & this will happen soon.
saifuk said:
i think i can add up little bit here.
1) u r on miui & u want to flash nitrogen so u go to recovery and backup ur current rom in case if u dont like nitrogen u can restore back to miui with all ur setting & app. now assume u r on nitrogen, after 4-5 days u dont like nitroge & u decided to come back to miui, so u go to recovery and restore yr backup that u have taken earlier. after success booting the screen with pin or password will appear. so u would enter/guess any previous password, pin u used earlier but it will not open. here the real problem come. i have also faced same issue & got upset searching endless solution on google . u will get mad on u. security bypass will also not work. after spending endless hour i come with solution. download aroma zip search on net. flash it through recovery this will help u to get in system its ike file manager. then head to data, system and delete all file u see below
locksettings.db, locksettings.db-shm, locksettings.db-wal, gatekeeper.password.key, gatekeeper.pattern.key
and then restart, yr problem would be solve.
2) nitrogen os does not support video calling via jio. none custom rom other then then miui support.
3)xposed is not available for oreo.
4)i have used nitrogen oreo for about 2 weeks it is stable but not as miui. some time r net would not work, jio call drop, lagging u have to restart on every time u faced problem. i suggest that wait for some time to roll out nought port for kenzo with zero bug & this will happen soon.
Click to expand...
Click to collapse
Thanks for the tip, will update the thread.
@JustMeErazem volte on 2nd sim works well. I myself use it. After flashing magisk just v need to hide root from all system apps to make sure volte works flawless even after reboot. Plz edit it in the description. I hav been using nos since many time so with experience i am giving my feedback. Thanks?
@saifuk what kind of nougat port u are expecting of ?
Aditya1011 said:
@JustMeErazem volte on 2nd sim works well. I myself use it. After flashing magisk just v need to hide root from all system apps to make sure volte works flawless even after reboot. Plz edit it in the description. I hav been using nos since many time so with experience i am giving my feedback. Thanks
Click to expand...
Click to collapse
I haven't rooted my phone, VoLTE still not working.
---------- Post added at 03:37 PM ---------- Previous post was at 03:34 PM ----------
@justmerazem Change VoLTE point again to previous. I installed NOS on mine & my other two friends' phone. They've not used magisk or superSU nor me. But VoLTE doesn't work on 2nd Sim for us.
AtomR said:
I haven't rooted my phone, VoLTE still not working.
---------- Post added at 03:37 PM ---------- Previous post was at 03:34 PM ----------
@justmerazem Change VoLTE point again to previous. I installed NOS on mine & my other two friends' phone. They've not used magisk or superSU nor me. But VoLTE doesn't work on 2nd Sim for us.
Click to expand...
Click to collapse
Flash latest firmware of developer rom. And volte is sure shot working.
Aditya1011 said:
Flash latest firmware of developer rom. And volte is sure shot working.
Click to expand...
Click to collapse
Mate, I'm already on 7.9.22 firmware. Lots of people are reporting it. Yours is working, must be some kind of random.
@Aditya1011 Mate, what happened? No reply? Huh. Latest firmware. No magisk, no any kind of root. No sound mod. Still Volte not working on 2nd Sim on 3 different Kenzos.
@JustMeErazem Please include in your post that VoLTE is indeed buggy.
how to install via dualboot patcher as secondary rom?
AtomR said:
@Aditya1011 Mate, what happened? No reply? Huh. Latest firmware. No magisk, no any kind of root. No sound mod. Still Volte not working on 2nd Sim on 3 different Kenzos.
@JustMeErazem Please include in your post that VoLTE is indeed buggy.
Click to expand...
Click to collapse
Idk bro y that happening to u. Flash miui EU rom n thn the nos rom. Mayb that should work.... Bcuz I had done that for the 1st time whn my volte wasn't working at any cost. Best of luck.
smjhh said:
how to install via dualboot patcher as secondary rom?
Click to expand...
Click to collapse
I don't think dual boot patcher supports oreo roms. Try asking on their thread to see if it does.
Google HDR camera 5 or 5.1 work with this ROM??
sagar13190 said:
Google HDR camera 5 or 5.1 work with this ROM??
Click to expand...
Click to collapse
Read op!
I tried google HDR camera v5 n v5.1 on lineage Oreo, MAOSP Oreo nitrogen Oreo ROM bt its not working...bt in ROM based on nogut 7.1.2 its work great
sagar13190 said:
I tried google HDR camera v5 n v5.1 on lineage Oreo, MAOSP Oreo nitrogen Oreo ROM bt its not working...bt in ROM based on nogut 7.1.2 its work great
Click to expand...
Click to collapse
It works for many users. Did you flash my zip or install an apk?
Sim card detection issue
Sometimes nitrogen os Oreo does not detect sim cards after reboot so I changed ROM and installed aosp extended. I know that Xyyx has already mentioned this as bug. Due to this bug it is not daily driver. Hope xyyx will fix this as soon as possible. If you have solution, please share it.
dhavalmehta said:
Sometimes nitrogen os Oreo does not detect sim cards after reboot so I changed ROM and installed aosp extended. I know that Xyyx has already mentioned this as bug. Due to this bug it is not daily driver. Hope xyyx will fix this as soon as possible. If you have solution, please share it.
Click to expand...
Click to collapse
Dude, it's really not a big problem, it detects it like 95% of the time. Just reboot and you're done. Or wait about 2 min and it should detect it. You could also just remove the sim and reinsert it. But since the latest few updates for me it gets detected 100% of the time. So update to 28/10/2017 build and you should be fine.
@JustMeErazem You're giving flase info. to others saying that VoLTE works on both sim. Actually, it works only on first sim. Tried, tested on 3 different Kenzo's. Clean flashed.
Conclusion: VoLTE doesn't work on 2nd sim.
What's this?
First of all, I'm not the original developer.
He post it on other Chinese forum, and I am just to ask for his permission and post it here.
All credits to Coolapk user: Tutoo.
This is an unofficial build of Pixel Experience Pie for Oneplus 5T (dumpling).
The original is for Oneplus5, you can find it here : Click here
The dev make a port version of this
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
WiFi
Bluetooth
Camera (but same as other Pie ROM, a little laggy in third apps)
Flashlight
Camcorder
Sound / vibration
GPS
AOD
Hotspot
NFC
VPN
And device specific addition (same as OP5 thread)
Known issues:
Permissive
or other issue same as OP5
Fingerprint gesture to view notification also not working
But you can try the solution provide by @Sabissimo at #16
Although that didn't work for me, some report they success, still looking into the problem
If that work for you, don't forget to give him a thank
If you find any bugs, you can PM me or leave comments below, I'll reported it to original dev
Instructions :
First, backup your data to PC or laptop
Second, you HAVE TO wipe data,system,cache AND INTERNAL STORAGE (some reported that it didnt boot if no wipe internal storage)
Third, flash the ROM and No verity zip (In my case, I use v3, but it seems with no problem)
Now you can boot up your device, it'll boot up TWO TIMES, and this is normal
CAUTION !!!
Version1 already include Gapps,Magisk (16.7), firmware, gcam and Redflare kernel (1.13 build)
So it is unnecessary to flash other zips
But in Version2, it didn't have firmware, but with Magisk (17.1) and Redflare kernel (1.16 build)
you guys need to take notice of this
Downloads:
Because original was on Baidu Cloud, and it may block some countries IP (Example: Taiwan)
So I upload it to Google Drive
If it is needed to upload to AFH or other cloud, just PM me, I'll upload it when I'm free
Here is the GD link:Version1
Version2
Credits:
Coolapk user "Tutoo" for his awesome work
and XDA user @bhageerathreddyy for help testing
Because of the forum rule, TG group link are not allow to post publicly here.
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.4.152, RedFlare EAS kernel
ROM Firmware Required: TWRP, Unlocked bootloader
Based On: AOSP
Version 2 changelog:
VoLTE reset on reboot Fixed
Proximity Sensor Fixed for FP and Gestures (Now phone won't start dialling numbers when in your pocket )
Added more Off screen Gestures and fixed V gesture
Improved OMNI slider switch
RedFlare kernel 1.16+
Linux 4.4.154
(Well... I copied these from original 5's thread. Don't forget to thank him for fix !!)
thanks
Thanks
Sent from my ONEPLUS A5010 using Tapatalk
This was much faster than expected for this rom, been swapping between this and OOS, will have to test this tonight and Pie for the first time, ty for fast release.
HI, just flashed this. Looks and feels good but the fingerprint swipe gesture doesn't seem to work properly, It treats it like arrow keys and navigates around the UI.
rijads said:
This was much faster than expected for this rom, been swapping between this and OOS, will have to test this tonight and Pie for the first time, ty for fast release.
Click to expand...
Click to collapse
Can u tell me dose it includes the adaptive battery and gcam ? And how are the animations ? And notification slider options
ROM is awesome! Adaptive battery, gcam, slider - all working
To make fingerprint gestures work, put this file in /system/usr/keylayout , and give it 755 permissions
https://drive.google.com/file/d/1Nhjs7YWulTHy-6d-AM1R1cLN_TfK-ieY/view?usp=sharing
MyStyle0714 said:
What's this?
First of all, I'm not the original developer.
He post it on other Chinese forum, and I am just to ask for his permission and post it here.
All credits to Coolapk user: Tutoo.
Click to expand...
Click to collapse
THREAD MOVED TO HOW-TO
Per the Device Forum Rules, all threads posted in the Development section must be your own work. ROM shares may be posted in the How-To section.
@Sabissimo how long does the boot took for you ? im on google bootanimation but nothing has happened since last 5 minutes ! can you also explain your installation process !
didn't help
Sabissimo said:
ROM is awesome! Adaptive battery, gcam, slider - all working
To make fingerprint gestures work, put this file in /system/usr/keylayout , and give it 755 permissions
https://drive.google.com/file/d/1Nhjs7YWulTHy-6d-AM1R1cLN_TfK-ieY/view?usp=sharing
Click to expand...
Click to collapse
i did what you wrote,
now swiping doesn't do anything
tids2k said:
@Sabissimo how long does the boot took for you ? im on google bootanimation but nothing has happened since last 5 minutes ! can you also explain your installation process !
Click to expand...
Click to collapse
First boot took about 1 min max. You have to be decrypted, flash rom, flash noverity (I flashed v3) - and you should be good.
---------- Post added at 11:06 AM ---------- Previous post was at 11:00 AM ----------
korm85 said:
i did what you wrote,
now swiping doesn't do anything
Click to expand...
Click to collapse
Well, it's definitely working for me tho, be sure to give it permissions.
Also, don't know if it matters, but I've searched for "swipe" in settings, and got in "Swipe fingerprints for notifications" menu, which is (weirldy) not available in "Gestures", there was no toggle there, tho, just instructions video. Maybe just entering that menu enabled that, try it out.
@Sabissimo did you update your firmware to 5.1.5 ? and have you installed vendor partition data ?
tids2k said:
@Sabissimo did you update your firmware to 5.1.5 ? and have you installed vendor partition data ?
Click to expand...
Click to collapse
I was on OB15, so whatever firmware it uses - I have it And had vendor of OB15, but I don't think that vendor matters, since this is not treble rom, and doesn't use /vendor, it uses /system/vendor
Sabissimo said:
Well, it's definitely working for me tho, be sure to give it permissions.
Also, don't know if it matters, but I've searched for "swipe" in settings, and got in "Swipe fingerprints for notifications" menu, which is (weirldy) not available in "Gestures", there was no toggle there, tho, just instructions video. Maybe just entering that menu enabled that, try it out.
Click to expand...
Click to collapse
Well... the dev said that the ROM doesnt have that function, but how can you enable ? I also follow your steps and give them permission then reboot again, but nothing happen.
Step-by-step of what I did:
1. Wiped everything except internal storage
2. Flashed ROM
3. Flashed no-verity v3
4. Rebooted, it rebooted twice, then started booting up with google animation
5. Noticed that fingerprint is working as cursor, went to settings, searched for "swipe", entered that menu, there's no toggle there
6. Pasted gf_input.kl in /system/usr/keylayout, gave it 755 permissions
7. Rebooted and everything is working!
Try doing it in the same sequence (First try to to enter swipe menu before pasting gf_input.kl, then paste it), maybe that did the trick.
Sabissimo said:
Step-by-step of what I did:
1. Wiped everything except internal storage
2. Flashed ROM
3. Flashed no-verity v3
4. Rebooted, it rebooted twice, then started booting up with google animation
5. Noticed that fingerprint is working as cursor, went to settings, searched for "swipe", entered that menu, there's no toggle there
6. Pasted gf_input.kl in /system/usr/keylayout, gave it 755 permissions
7. Rebooted and everything is working!
Try doing it in the same sequence (First try to to enter swipe menu before pasting gf_input.kl, then paste it), maybe that did the trick.
Click to expand...
Click to collapse
Confirm this was the exact process I followed and works like a charm. Just need a couple of days with it to test battery life.
just have one thing to say thankyou so much and this rom is just smooth
For anyone that wants to flash this ROM, don't worry about your firmware. This ROM's .zip file contains a firmware ALREADY so it will flash the necessary firmware itself!
Sabissimo said:
Step-by-step of what I did:
1. Wiped everything except internal storage
2. Flashed ROM
3. Flashed no-verity v3
4. Rebooted, it rebooted twice, then started booting up with google animation
5. Noticed that fingerprint is working as cursor, went to settings, searched for "swipe", entered that menu, there's no toggle there
6. Pasted gf_input.kl in /system/usr/keylayout, gave it 755 permissions
7. Rebooted and everything is working!
Try doing it in the same sequence (First try to to enter swipe menu before pasting gf_input.kl, then paste it), maybe that did the trick.
Click to expand...
Click to collapse
where is this gf_input.kl?? why should i do this for the pill gestures?
Code:
**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****
Welcome to COSP, your new future Android Operating System.
Our goal is to have an Pixel-like android ROM that isn't spying on you and uses as few system space as possible. Also, we provide the option to go completely without GApps using MicroG support.
Why us?
We are focusing on stability and performance, having an debloated ROM is essential for that. Also, we want Users to decide what kind of Store they want to use, either F-Droid or the Play Store.
Also, we take User requests serious. To suggest something, contact us on telegram.
Features:
1) All systemUI tuning elements
2) An handy Network indicator
3) Charging Information
4) Lawnchair and Quickstep as default
5) Quick Settings mods
6) Signature spoofing
7) OP gestures
8) Navbar tuner
9) Rootless Substratum (with fixes to theme system correctly)
10) Screenshot/screenrecord tile
11) Advanced power menu
12) Double tap to sleep on statusbar
13) Option to disable quick settings/power menu on secure lockscreen
OTA Updating for official devices enables Users to get the newest version with ease.
DOWNLOADS:
https://mirror.codebucket.de/cosp/santoni/COSP-190507-OFFICIAL-santoni.zip
Sources:
ROM Source: https://github.com/cosp-project/
Kernel Source code: https://github.com/HarukeyUA/android_kernel_xiaomi_santoni
Device Tree: Coming Soon
ChangeLog:-07-05-2019
COSP Changelog
From April to May patch
New:
+ May security patch merged
+ replaced Lawnchair with Launcher3 from @aosiP
+ App Ops/Privacy Guard
+ Agressive Battery from @aosiP
+ Accent picker from @PixelExperience
+ seperate ringtone for second sim
+ translations: russian, italian, simplified chinese
+ font picker
+ more steps for font size
+ search bar hiding in launcher
+ switch for fingerprint authentication vibration
+ switch for inverting navbar layout
+ button on FC dialog for sending crash info to dogbin
Fixed:
* QS padding on statusbar
* crash on security settings
* LTE+ icon
* app swithching on OP gestures
* sepolicy
Removed:
- "press power on lock screen for torch" (it wasn't working anyway)
Download:
https://mirror.codebucket.de/cosp/santoni/COSP-190507-OFFICIAL-santoni.zip
Hi, I'm testing this rom for a week, and ... the rom is basically have too lag even to move apps from day to day like twitter, facebook, google chrome and firefox also go very slow too,
regards
folderx said:
Hi, I'm testing this rom for a week, and ... the rom is basically have too lag even to move apps from day to day like twitter, facebook, google chrome and firefox also go very slow too,
regards
Click to expand...
Click to collapse
No bug i found. change kernel and check
i am also using this rom for a week or so. clean flashed. even formatted the storage before installation. so far this is one of the best roms i have ever used on santoni. and i can say that i have used almost every one of them. great battery life, great performance.
Sorry for the inconvenience, it was not the fault of the rom, it was because I had activated the option of digital well-being, I deactivated it and now it works great
Cosp Official June Update
Changelog:
+ June security patch merged
+ More modes for location tile
+ Captive portal switch (Settings -> Network & Internet)
+ "More info" on permission dialog, thx to @GrapheneOS
+ Incall vibration options (COSP Settings -> Miscellaneous)
Changed:
* DNS.watch by default everywhere
* moved PrivacyGuard (COSP Settings -> Miscellaneous)
* moved Reading Mode (COSP Settings -> Miscellaneous)
* volte icon
* some permissions changes by @GrapheneOS
Fixes:
* fixed AgressiveBattery auto enable
* fixes in PrivacyGuard
* minor SurfaceFlinger fixes (hopefully fix color correction)
* minor Settings fixes
* minor LatinIME fixes
Download:
https://mirror.codebucket.de/cosp/santoni/COSP-190604-OFFICIAL-santoni.zip
I did the latest OTA-Update and now my device stuck in a bootloop at the Mi-branding. No success getting into recovery (was Orangefox), so I flashed a new one with fastboot. I restored my last backup, which was working before, but it gave me the same result - bootloop! Anyone experiences the same or any idea where to search or how to fix this? I used Magisk by the way...
gorillus said:
I did the latest OTA-Update and now my device stuck in a bootloop at the Mi-branding. No success getting into recovery (was Orangefox), so I flashed a new one with fastboot. I restored my last backup, which was working before, but it gave me the same result - bootloop! Anyone experiences the same or any idea where to search or how to fix this? I used Magisk by the way...
Click to expand...
Click to collapse
Hi. Had this problem with clean flash too. Its not your fault Sir. I dont know if Bikram already had time to change link here. But its fixed for sure.
I downloaded and flashed this update last night :
https://sourceforge.net/projects/bi...Pie/COSP-190604-OFFICIAL-santoni.zip/download
Rom boots and work as it should!
Wifi is not working in latest update, please help
Bhanu_p_mishra said:
Wifi is not working in latest update, please help
Click to expand...
Click to collapse
How did you flash Sir? I did clean flash and Wifi works.
Samuitan said:
How did you flash Sir? I did clean flash and Wifi works.
Click to expand...
Click to collapse
I also clean flashed it, though used migrator to restore apps, perhaps this is the reason for that
---------- Post added at 02:56 PM ---------- Previous post was at 02:52 PM ----------
Bhanu_p_mishra said:
I also clean flashed it, though used migrator to restore apps, perhaps this is the reason for that
Click to expand...
Click to collapse
By the way which kernel do you used with this build
Bhanu_p_mishra said:
I also clean flashed it, though used migrator to restore apps, perhaps this is the reason for that
Click to expand...
Click to collapse
You mean Migrate? I use it also to restore Userapps. I think thats not the reason .
What do you wipe for clean flash?
I wipe everything except Internal and SD Card.
Then Flash Rom and Gapps. Reboot and do Google Stuff.
After that go back to Recovery and flash Magisk and Migrate Backup zip.
Have no Problems . Try it!
Samuitan said:
You mean Migrate? I use it also to restore Userapps. I think thats not the reason .
What do you wipe for clean flash?
I wipe everything except Internal and SD Card.
Then Flash Rom and Gapps. Reboot and do Google Stuff.
After that go back to Recovery and flash Magisk and Migrate Backup zip.
Have no Problems . Try it!
Click to expand...
Click to collapse
I actually unable to understand the steps to use migrator, could you please suggest me the actual steps that you used to use migrate for rom migration purpose.
Bhanu_p_mishra said:
I actually unable to understand the steps to use migrator, could you please suggest me the actual steps that you used to use migrate for rom migration purpose.
Click to expand...
Click to collapse
Im confused. You said you use Migrate? Then you made a backup or not? What steps exactly make you headache?
I posted once my restore steps in Migrate Thread. Scroll down.
Read a little bit there too for understanding how it works.
And what about Wifi? Works now?
Samuitan said:
Im confused. You said you use Migrate? Then you made a backup or not? What steps exactly make you headache?
I posted once my restore steps in Migrate Thread. Scroll down.
Read a little bit there too for understanding how it works.
And what about Wifi? Works now?
Click to expand...
Click to collapse
I am actually using migrator which is a magisk module(not currently supported) which is different from the migrate app that you quoted, not knowing earlier about this, thanks for your post, going to try clean flash with migrate app and then see how WiFi works
Bhanu_p_mishra said:
I am actually using migrator which is a magisk module(not currently supported) which is different from the migrate app that you quoted, not knowing earlier about this, thanks for your post, going to try clean flash with migrate app and then see how WiFi works
Click to expand...
Click to collapse
You're Welcome.
Ok.. just a misunderstanding lol. Dont know about Magisk Module. I dont use any.
Yes try Migrate. Its really good. I often flash different Roms.
Please give feedback if everything works then
I would like to try this ROM too.
Does the menu translated into Romanian?
McJohn.br said:
I would like to try this ROM too.
Does the menu translated into Romanian?
Click to expand...
Click to collapse
Seems so..
Edit: Sorry wrong Rom..Thats Derpfest lol.
Samuitan said:
Seems so..
Edit: Sorry wrong Rom..Thats Derpfest lol.
Click to expand...
Click to collapse
Attached image cannot be seen!
What was that about ?