Related
I have tried installing the apk but everytime I install the driver and reboot it asks me to do it again.
I have tried renaming audio_conf but still not luck.
How do I go about install viper to 7.1.2 without it failing
Search for VIPER4Android_2.5.0.5_guitardedhero.zip,
flash the zip with twrp, reboot your device, use a root explorer and under vendor/etc rename the audio_effects.conf to audio_effects.conf.bak for example.
Start the viper app, apply the driver install, be patient, after install reboot your device, viper works now even with selinux enforced. The viper app will be installed with the zip, no need to download it anywhere else.
Here on XDA you will find threads about viper and arise from guitardedhero.
coremania said:
Search for VIPER4Android_2.5.0.5_guitardedhero.zip,
flash the zip with twrp, reboot your device, use a root explorer and under vendor/etc rename the audio_effects.conf to audio_effects.conf.bak for example.
Start the viper app, apply the driver install, be patient, after install reboot your device, viper works now even with selinux enforced. The viper app will be installed with the zip, no need to download it anywhere else.
Here on XDA you will find threads about viper and arise from guitardedhero.
Click to expand...
Click to collapse
This solution is indeed reposted everywhere but did not work for me.
What worked was a clean install of my ROM ( lineageOS 14.1 20170619 nightly) , Kernel (Franco v52), and SuperSU (v2.79) (Magisk somehow messes everything up). Then I flashed ARISE with one of the older .zip (2.94 should work, I don't know which version I used since I renamed it back in march).
In AROMA I chose "jedi" -> viper 2.3.4.0, since only the older Version works and "remove deep buffer"
after the installation I rebooted, changed the name of
/vendor/etc/audio_effects.conf
and installed busybox to
/system/bin
so viper would find it. If you don't do that, viper will try and fail to install the driver, complaining busybox is not installed. The driver is already installed by the ARISE.zip so you can reboot.
After turning off "AudioFX" Viper worked as desired (including streaming audio, that's what "remove deep buffer" is for).
theduckking said:
This solution is indeed reposted everywhere but did not work for me.
What worked was a clean install of my ROM ( lineageOS 14.1 20170619 nightly) , Kernel (Franco v52), and SuperSU (v2.79) (Magisk somehow messes everything up). Then I flashed ARISE with one of the older .zip (2.94 should work, I don't know which version I used since I renamed it back in march).
In AROMA I chose "jedi" -> viper 2.3.4.0, since only the older Version works and "remove deep buffer"
after the installation I rebooted, changed the name of
/vendor/etc/audio_effects.conf
and installed busybox to
/system/bin
so viper would find it. If you don't do that, viper will try and fail to install the driver, complaining busybox is not installed. The driver is already installed by the ARISE.zip so you can reboot.
After turning off "AudioFX" Viper worked as desired (including streaming audio, that's what "remove deep buffer" is for).
Click to expand...
Click to collapse
Yes, that's what I usually use too (2.94), but he was only asking for viper, and the solution i posted does work. I'm actually using it this way with paranoid and have no issues. I use viper with every rom and I always delete AudioFX, musicfx and remove deep buffering, but I don't install extra busybox on los based roms.
coremania said:
Yes, that's what I usually use too (2.94), but he was only asking for viper, and the solution i posted does work. I'm actually using it this way with paranoid and have no issues. I use viper with every rom and I always delete AudioFX, musicfx and remove deep buffering, but I don't install extra busybox on los based roms.
Click to expand...
Click to collapse
The guitardedhero.zip did not work for me, as to why I don't know. Magisk also has several modules that should enable Viper4Android which seem to function for the wast majority of (angler) users. Maybe the installation of busybox is unnecessary, I did not check because I dreaded one more reboot after hours of tinkering. If there is an obvious culprit that hinders an "easy" installation of Viper4Android, I'd be quite interested. I'm struggling with that guitardedhero.zip solution since i upgraded to 7.x. (throughout stock and LineageOS and all bootloader/radio/vendor versions).
theduckking said:
The guitardedhero.zip did not work for me, as to why I don't know. Magisk also has several modules that should enable Viper4Android which seem to function for the wast majority of (angler) users. Maybe the installation of busybox is unnecessary, I did not check because I dreaded one more reboot after hours of tinkering. If there is an obvious culprit that hinders an "easy" installation of Viper4Android, I'd be quite interested. I'm struggling with that guitardedhero.zip solution since i upgraded to 7.x. (throughout stock and LineageOS and all bootloader/radio/vendor versions).
Click to expand...
Click to collapse
I will update my n7 and tryout guitardedhero.zip.
The n7 runs with los.
Usually I use arise with my tablet for enjoying dolby too.
Edit: with Los only permissive, but it's working
Can't handle the sound on this phone. How do we get viper to work?
jkieffer46 said:
Can't handle the sound on this phone. How do we get viper to work?
Click to expand...
Click to collapse
Download ExperienceOS Add-on Aroma 5.0 and flash Divine Beats Audio mod here: https://forum.xda-developers.com/oneplus-5/development/rom-experienceos-r1-0-lite-addon-t3626657
Simpliest way :
- Download and install Busybox on your phone.
- Set SELINUX to permissive mode.
- Download and flash this Viper4android Zip : www.androidfilehost.com/?fid=745425885120697254
Normally all should be working. (Maybe open Viper4android app and install the driver first)
Also don't forget tout uninstall or disable any other audiofx you have.
(I know it's still the 2.4.0.1 version but it's still my fav)
Uninstall any viper APK and flash this on twrp...
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
Does this work while encrypted? Also does it require any additional file tweaking or driver installation?
HDash said:
Does this work while encrypted? Also does it require any additional file tweaking or driver installation?
Click to expand...
Click to collapse
Just flash on twrp...working great ...
After flashing you get the viper icon on your drawer...
Just open it and enable ..
Viper for OnePlus 5
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
Works like a charm! ?
Thank you so much.
Cheers
It is working for me only if I set SELinux to permissive. Tried so many diffirent builds. The last one is ViPER4Android_2.5.0.5_guitardedhero.zip.
(used the guide from here: http://andxda.blogspot.com/2016/09/how-to-install-viper4android-on-android.html)
Did someone have a success to run viper4android in selinux Enforcing mode !?
polzovotel said:
It is working for me only if I set SELinux to permissive. Tried so many diffirent builds. The last one is ViPER4Android_2.5.0.5_guitardedhero.zip.
(used the guide from here: http://andxda.blogspot.com/2016/09/how-to-install-viper4android-on-android.html)
Did someone have a success to run viper4android in selinux Enforcing mode !?
Click to expand...
Click to collapse
I have no idea about the SELinux modes but I just flashed the Deutronomy zip without changing anything else and now it works perfectly
What ROM are you using ? OxygenOS 4.5.8 ?
---------- Post added at 03:10 PM ---------- Previous post was at 02:38 PM ----------
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
I am running OxygenOS 4.5.8. Root and BusyBox is installed. I flashed this zip but still get:
Enabled: No
Status: Abnormal
The same second I change SULinux to permissive - all start working fine....
Another Method
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
henrikh1998 said:
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
Click to expand...
Click to collapse
i download from magisk download after flash i reboot but still logo oneplus!!!
guide me!
cultofluna said:
Uninstall any viper APK and flash this on twrp...
Click to expand...
Click to collapse
excuse me, do i need to be rooted? or at least unlock the bootloader?
I will be creating a thread for simplest and proper viper4android installation on OxygenOS in my free time soon.
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
Watch out in the Guides, New & Discussions section for my guide, thread to be posted soon.
ivongolia said:
excuse me, do i need to be rooted? or at least unlock the bootloader?
Click to expand...
Click to collapse
You need to unlock the bootloader and install custom recovery to install this ..
henrikh1998 said:
Hey Guys,
so I found another way to get V4A working.
Worked for me on enforcing too, but i couldn't test it 100% because my ROM is permissive.
This Viper version is called Viper FX and has the same features as V4A by guitardedhero.
It is a Magisk module so u need to be rooted with Magisk to get this working.
ViperFX:
https://forum.xda-developers.com/apps/magisk/viperfx-mkm-magisk-t3535401
I also found another very usefull Module called Universal deep_buffer remover.
This Module allows you to use Viper FX with streaming apps (e.g. Soundcloud, Pandora, ...) which are normally not affected by Viper.
Universal deep_buffer remover:
https://forum.xda-developers.com/apps/magisk/module-universal-deepbuffer-remover-t3577067
Hope I could help!
Click to expand...
Click to collapse
Tried the version in Magisk repo, but nothing happend after reboot. I can see the module in magisk but no Viper4Android-app. So I did a delete in Magisk Manager. Also, the thread is closed now.
Going to try install V4A via TWRP and his new module.
https://forum.xda-developers.com/apps/magisk/alienoidos-t3660485
Update:
Didn't work for me. No V4A-app, so I installed it manually and it tolds me to install drivers, did that reboot and it still said install drivers.
I'm on latest OOS with Magisk 13.3
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
guitardedhero said:
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
Click to expand...
Click to collapse
Thx for your share and clarification.
However, I'm really confuse by all these different realeases : Viper4Android, Viper4Arisee ViperFX, ...
I really don't know which one to install
guitardedhero said:
I have a OnePlus 5, so you guys ought to be in good shape. The zip attached below is intended to work perfectly for Magisk and SuperSU users in Enforcing SELinux Mode.
In fact, if genuine init.d support is obtained (I've been trying for weeks now...), no root will be necessary at all.
BusyBox is already unnecessary for any installation scenario, though. Of course, I mean unnecessary for ViPER4Android. BusyBox has its uses elsewhere in Android. :good:
Click to expand...
Click to collapse
Dunno why but still the same problem.
Seeing the module in Magish (flashed via TWRP) but no V4A-app.
Should i dirty flash my ROM* and try again maybe?
* 4.5.8: OnePlus5Oxygen_23_OTA_013_all_1708032241_9a87b4.zi p
chrissss91 said:
Thx for your share and clarification.
However, I'm really confuse by all these different realeases : Viper4Android, Viper4Arisee ViperFX, ...
I really don't know which one to install
Click to expand...
Click to collapse
You're not alone.
ViPER4Arise is merely a themed version of ViPER4Android and ViperFX designed for the ARISE Sound Systems™ project.
ViperFX is merely the current 2.5.0.5 version of what is known previously as ViPER4Android, although it hasn't quite caught on obviously. This slight name change was a part of much bigger and impactful changes such as the official website address/domain, for example. :good:
acrylamid said:
Dunno why but still the same problem.
Seeing the module in Magish (flashed via TWRP) but no V4A-app.
Should i dirty flash my ROM* and try again maybe?
* 4.5.8: OnePlus5Oxygen_23_OTA_013_all_1708032241_9a87b4.zi p
Click to expand...
Click to collapse
Lol yeah, that is certainly not the intended outcome. At least we now know it is something on your end, most likely Magisk-related, although an existing v4a data or system installation can produce those same results.
I recommend a factory-reset in TWRP followed by an OOS-4.5.8 flash whenever it feels like a good time to do so, or at least uninstall and reinstall Magisk if nothing else.
We'll get you going, don't you worry. :good:
Comprehensive audio guide for android 8.1 and P DP1 (saves battery)
Cyan means 8.1 ONLYFor android P only, flash the magisk modules in TWRP, manager is broken with module flashing, just a temp patch from @topjohnwu
I am not responsible if you break, blow up, or destroy your device in any way
Hi XDA, this is the comprehensive guide to making the google pixel and XL have the ultimate audio mods installed while saving battery (if xposed is what you're looking for, it's under amplify)
Prerequisites
TWRP 3.2.1-x
Magisk v15.x REQUIRED
busybox (osm0sis) installed (for some mods)
Link to homeboy76's guide, look at step 9 or 10
Magisk permissive module Download
Dual stereo speakers Magisk module by kingbri(me) (AML bug fixed)
I ported Chdloc's mod into a magisk module, need to add it to the official repo, but it works very well right now
Download the zip file from this thread https://forum.xda-developers.com/pixel-xl/development/magisk-module-pixel-stereo-speakers-t3753190
Make sure you have permissive installed (check prereqs)
Flash it in Magisk
Reboot
Profit
Atmos
Download dolby unity port by @Zackptg5
Install (Universal)
Flash the permissive script in magisk
Flash the dolby zip in Magisk, It's a module
Reboot
App should be installed
IF installing with V4A, install Atmos, reboot, then V4A, then audio modification library, reboot. Everything should work
V4A steps
Install Ahiron and zackptg 5's v4a module (follow the prompts during installation)
You're done!
Ainur Sauron mod- fixes audio quality by importing qualcomm drivers as opposed to the stock android ones
Open magisk manager and navigate to downloads
search for ainur and download mark II.II
AML(audio mod lib) is installed (updated if you have v4a) by default
Reboot
If mod does not install properly, reflash the installation zip and should uninstall the mod
Battery saving
Greenify
Install the magisk module for greenify
open greenify and select NOT rooted
follow the prompts
go into settings after wizard
change mode to rooted
grant SU access
L speed (very important, this is the best battery saver app)
Install the beta from play store
Open the app and choose the AMOLED theme
choose the battery profile
turn on fstrim every boot
turn on aggressive doze (not recommended while driving, use greenify aggressive doze instead if you drive a lot)
After booting, launch L-speed and allow it to execute scripts
Hibernate Google Play services
Go into magisk manager and find the downloads section
Download sysconfig patcher, patches Google play store and other battery draining system processes so they don't drain battery
ElementalX kernel
Configure as elementalx governor with wq_powersaving enabled in the cpu menu
Amplify!
Installing Xposed framework and amplify
download xposed framework systemless here(make sure it is beta 2)
download xposed installer here
Install the xposed zip directly in magisk like a magisk module
Install xposedinstaller apk
reboot(takes a long time to boot firstrun)
open xposed installer
check to see if xposed is installed
install amplify from the PLAY STORE (not sure why it isn't installing in xposed)
activate xposed module and reboot
relaunch amplify and let it run on the default settings!
amplify configurations (updating specifics, requests avaliable in comments)...
Feel free to comment with updates to this guide, I will consider them and put them into the op!
Hi, i don´t understand the step for dual stereo speakers can you explain better? because is a confuse, thanks
TotoBerto02 said:
Hi, i don´t understand the step for dual stereo speakers can you explain better? because is a confuse, thanks
Click to expand...
Click to collapse
you download the zip file, and you copy and paste the commands while your phone is connected to the computer, "file name" is the file path where the zip is stored on your computer
UPDATE:
added ainur sauron mark II mod in OP
rewrote chdloc dual stereo speakers mod
kingbri said:
UPDATE:
added ainur sauron mark II mod in OP
rewrote chdloc dual stereo speakers mod
Click to expand...
Click to collapse
What does the rewrite of chdloc stero speakers do?
does the new version of arise work with 8.1?
willyumlu said:
does the new version of arise work with 8.1?
Click to expand...
Click to collapse
As far as I believe Arise doesn't work with 8.1 (could be wrong) But I use a magisk Module Viper4Magisk or whatever it's called will install V4A works fine I tried a Dolby Oreo zip on the Arise thread but it didn't show in app drawer so not sure if that installed correctly hope that helps :good:
Fwiw, I used this with Magisk 15.2 in a clean install of 8.1. Working without issue
https://forum.xda-developers.com/showthread.php?t=3577058
Sent from my Pixel XL using Tapatalk
liam_davenport said:
As far as I believe Arise doesn't work with 8.1 (could be wrong) But I use a magisk Module Viper4Magisk or whatever it's called will install V4A works fine I tried a Dolby Oreo zip on the Arise thread but it didn't show in app drawer so not sure if that installed correctly hope that helps :good:
Click to expand...
Click to collapse
ARISE itself works with 8.1, some of the modules are incompatible though, waiting (hunting) for a fix
Homeboy76 said:
What does the rewrite of chdloc stero speakers do?
Click to expand...
Click to collapse
It just means that I edited the guide to include a few commands I missed
It doesn't actually give you dual speakers though? My understanding is that one side is a speaker and the other is a microphone.
Sent from my Pixel XL using Tapatalk
MeetFace said:
It doesn't actually give you dual speakers though? My understanding is that one side is a speaker and the other is a microphone.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
It uses the speaker and the earpiece for audio, similar to the iphones
UPDATE 1/08/18- added dolby atmos guide, make sure to install this before any magisk audio mod
kingbri said:
UPDATE 1/08/18- added dolby atmos guide, make sure to install this before any magisk audio mod
Click to expand...
Click to collapse
Link please!
fixed
How do you get Viper to work? Which prompts are the correct ones? After installing 2.5 with everything else it gives me an I/O error on installing the driver. I'm on LineageOS 15.2 btw.
buzzywuzzy said:
How do you get Viper to work? Which prompts are the correct ones? After installing 2.5 with everything else it gives me an I/O error on installing the driver. I'm on LineageOS 15.2 btw.
Click to expand...
Click to collapse
First of all are you on aml viper? ARISE doesn't work with 8.1 and i'm talking to some of the devs about fixing this issue. I've had some experience with LOS, it may be throwing an error because of the rom or because there are some other things LOS has by default that is interfering with viper. The builds are unstable, my advice would be to switch to crDroid because it is LOS based, but is made for audio. I'm not sure what you mean by prompts but I have been hitting the vol up key both times and it works for me on the Pixel Dust rom
kingbri said:
First of all are you on aml viper? ARISE doesn't work with 8.1 and i'm talking to some of the devs about fixing this issue. I've had some experience with LOS, it may be throwing an error because of the rom or because there are some other things LOS has by default that is interfering with viper. The builds are unstable, my advice would be to switch to crDroid because it is LOS based, but is made for audio. I'm not sure what you mean by prompts but I have been hitting the vol up key both times and it works for me on the Pixel Dust rom
Click to expand...
Click to collapse
Oh okay, well I might check that out then. I just followed all the steps in the guide step by step and thats the only one i couldnt get to work. I didn't attempt ARISE at all.
buzzywuzzy said:
Oh okay, well I might check that out then. I just followed all the steps in the guide step by step and thats the only one i couldnt get to work. I didn't attempt ARISE at all.
Click to expand...
Click to collapse
I changed the v4a guide, you don't need the permissive module, maybe that's what's crashing it?
kingbri said:
I changed the v4a guide, you don't need the permissive module, maybe that's what's crashing it?
Click to expand...
Click to collapse
It didn't "crash" per se, it just wouldn't install the necessary driver after the package was installed. I'll try it with the module disabled and see if it works. Do I still need the permissive module for the other mods? Or just when they're being installed?
Updated: OP contains instructions for Android Pie and below, post #5 has current instructions for Android Q.
Saw a couple Viper4Android threads, did not see much in terms of profiles for the 2 XL specifically. Just got the 2 XL coming from a 6P and there was a great profile to optimize it's internal speakers so decided to try out the mod for the 2 XL's speakers. Working very nicely.
Not sure if this will work with every ROM but works nice on Bootleggers (should work on any Pie ROM including stock) and thought I would share so more people could enjoy much improved sound quality. Makes rooting the phone well worth it.
Instructions:
After installing Magisk 18.1
Install BusyBox and run the set-up
Download the Viper4Android V4.1 (used Material theme) via Magisk manager
run the install process, select 2.5.0.4 material theme, install as system app, grand root access then reboot
Load the DorianX profile taken from the 6P. Just unzip then look over the extracted files.
Edited to explain further: You will probably need to individually place the "SRS Audio HD" IRS file in the Viper4Android Kernel folder and put the Profile folder in the Viper4Android Profile folder (using a file explorer to copy/paste the files). Once that's done, in the Viper4Android app under "Convolver", tap it and choose "impulse response file", You should see the "SRS Audio HD" IRS file that you placed in the Kernel folder, select it, tick the box next to Convolver to enable it. Under the main app settings you should be able to select and load the profile. If you did it correctly the DorianX profile folder should be visible to select it. It depends which version of Viper4Android you install. If you do materialized (2.5.0.4) the above should work. Let me know if any problems
Play some music. Toggle Viper4Android master power on and off under the phone speaker tab within the app then back to on once to enable it. Usually you have to do this to "officially" enable Viper4Android. If it's working you will hear the difference. Under the app settings you can verify that the app is processing as well under "driver status". Working with the latest Poweramp, Youtube, etc.
Credit to DorianX who made the profile. There are 4 profiles included to optimize specific bluetooth devices, headphones,etc but just using the internal speaker one (for now). Unable to locate the past post in the 6P forum containing the profile and which other devices were optimized to link to it.
Works very well and thought it was worth posting and making a small contribution so for now enjoy! Profile attached.
Have Viper4Android working nicely on Android Q Beta 4.
Those that downloaded this profile if you don't mind posting the Dorian profile speaker settings (all of them for each tab and whether enabled or disabled) would appreciate it. Profiles no longer can be loaded in this version of Viper.
Looking at the speaker xml file can see some of the settings but probably not all.
Magisk 19.3, Adaway works, viper now works all on today's beta 4. Tried all versions and combos. Getting the driver to install and stick was a big pain.Can post some instructions if anyone is interested. I'm sure plenty of people would like to get viper working.
Now if only Google apps like Gmail and Google play would be themed. Can see the force dark toggle is broken in this beta. Not sure if the Google apps were theming in Beta 3 or not.
powerserge1 said:
Have Viper4Android working nicely on Android Q Beta 4.
Those that downloaded this profile if you don't mind posting the Dorian profile speaker settings (all of them for each tab and whether enabled or disabled) would appreciate it. Profiles no longer can be loaded in this version of Viper.
Looking at the speaker xml file can see some of the settings but probably not all.
Magisk 19.3, Adaway works, viper now works all on today's beta 4. Tried all versions and combos. Getting the driver to install and stick was a big pain.Can post some instructions if anyone is interested. I'm sure plenty of people would like to get viper working.
Now if only Google apps like Gmail and Google play would be themed. Can see the force dark toggle is broken in this beta. Not sure if the Google apps were theming in Beta 3 or not.
Click to expand...
Click to collapse
a lot interesting of this, this is a reason why I am rollback to custom on pie while like q beta
libracez said:
a lot interesting of this, this is a reason why I am rollback to custom on pie while like q beta
Click to expand...
Click to collapse
See below
Ok I got it. No need to PM me the profile. Took most of the night but done now.
Would be unable to stay on Q without Viper4Android as well...
Make sure to uninstall all previous versions of Magisk and modules to start fresh.
Install Magisk 19.3 via twrp, install latest Magisk manager and then Busybox (make sure to set up busybox). Some are having problems with this Beta and Magisk so YMMV. Working well for me and no app lag.
On Pie in Magisk you should see Viper4Android 2.7.1 module as available
On Q it's not listed (for me at least) so get it from XDA labs.
Install Viper4Android:
https://labs.xda-developers.com/store/app/download/com.pittvandewitt.viperfx (link to direct download, must be signed in)
Or use this link: https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
The installer will install it as a magisk module. Grant supersu permissions, install driver, phone will reboot.
Install the magisk audio modifications library module. Reboot. After rebooting disable this module (do not uninstall). Reboot again.
Open up Viper4Android. If it asks you to install driver again do so and phone will automatically reboot. Repeat if needed. If driver install remains unsuccessful try enabling and disabling the audio modifications module then try again. What worked for some worked the opposite for others in past threads on previous Android versions and various devices. Here is the thread for reference: https://forum.xda-developers.com/pixel-2/help/viper4android-driver-installation-fails-t3766362
Once driver is installed the app will load properly and under driver status it will probably say "unsupported" and "abnormal". Close the app
Go back into Magisk manager. Now toggle to re enable the audio modifications module. Reboot. (This is the module that allows Viper4Android to process and can help to install the driver)
Upon reboot, Viper4Android should work. Play some music, check the driver status to verify, you may need to toggle off/on master limiter to finally enable it.
For this profile, put the SRS file in OP above in the Viper4Android Kernel folder. Under the apps speaker tab manually input these settings:
Master limiter: On
Playback gain: moderate or 2, max gain 4x, output threshold -1.9db
FIR Equalizer: On. EQ is flat
Convolver: On. Tap convolver then select the SRS inpulse file you placed in the Kernel folder. Cross channel set to 0
Profit.
You can set or disable the viper4android notification icon in the statusbar within the app's settings.
Let me know how the 2 XL's speakers sound Post updated, instructions should be clear enough. Some having problems will need to wait for the updated Magisk. Moving forward, we do have viper4android working on Q. Fully tested on my 2xl and stable with beta 4.
Thanks to @Team_DeWitt
And Dorianx for his profile originally created for the 6p
powerserge1 said:
Ok I got it. No need to PM me the profile. Took most of the night but done now.
Would be unable to stay on Q without Viper4Android as well...
Make sure to uninstall all previous versions of Magisk and modules to start fresh.
Install Magisk 19.3 via twrp, install latest Magisk manager and then Busybox (make sure to set up busybox). Some are having problems with this Beta and Magisk so YMMV. Working well for me and no app lag.
On Pie in Magisk you should see Viper4Android 2.7.1 module as available
On Q it's not listed (for me at least) so get it from XDA labs.
Install Viper4Android:
https://labs.xda-developers.com/store/app/download/com.pittvandewitt.viperfx (link to direct download, must be signed in)
Or use this link: https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
The installer will install it as a magisk module. Grant supersu permissions, install driver, phone will reboot.
Install the magisk audio modifications library module. Reboot. After rebooting disable this module (do not uninstall). Reboot again.
Open up Viper4Android. If it asks you to install driver again do so and phone will automatically reboot. Repeat if needed. If driver install remains unsuccessful try enabling and disabling the audio modifications module then try again. What worked for some worked the opposite for others in past threads on previous Android versions and various devices. Here is the thread for reference: https://forum.xda-developers.com/pixel-2/help/viper4android-driver-installation-fails-t3766362
Once driver is installed the app will load properly and under driver status it will probably say "unsupported" and "abnormal". Close the app
Go back into Magisk manager. Now toggle to re enable the audio modifications module. Reboot. (This is the module that allows Viper4Android to process and can help to install the driver)
Upon reboot, Viper4Android should work. Play some music, check the driver status to verify, you may need to toggle off/on master limiter to finally enable it.
For this profile, put the SRS file in OP above in the Viper4Android Kernel folder. Under the apps speaker tab manually input these settings:
Master limiter: On
Playback gain: moderate or 2, max gain 4x, output threshold -1.9db
FIR Equalizer: On. EQ is flat
Convolver: On. Tap convolver then select the SRS inpulse file you placed in the Kernel folder. Cross channel set to 0
Profit.
You can set or disable the viper4android notification icon in the statusbar within the app's settings.
Let me know how the 2 XL's speakers sound Post updated, instructions should be clear enough. Some having problems will need to wait for the updated Magisk. Moving forward, we do have viper4android working on Q. Fully tested on my 2xl and stable with beta 4.
Thanks to @Team_DeWitt
And Dorianx for his profile originally created for the 6p
Click to expand...
Click to collapse
succesfuly, ty
for my 2xl It was
1. installation from xda lab - reboot
2. install audio modification library - reboot
3. open viper (still asking to install driver - just close app, don't choose nothing)
4. go to Magisk switch off audio modification library - reboot
5. viper successfully load, status normal and working (media) with just my favorite profile no custom settings
libracez said:
succesfuly, ty
for my 2xl It was
1. installation from xda lab - reboot
2. install audio modification library - reboot
3. open viper (still asking to install driver - just close app, don't choose nothing)
4. go to Magisk switch off audio modification library - reboot
5. viper successfully load, status normal and working (media) with just my favorite profile no custom settings
Click to expand...
Click to collapse
Our 2 XL's can be temperamental, lol.
Glad you got it working. Not sure how the driver installed and the viper app fixed itself with the audio modifications module switched off. It's like you didn't need that module at all. Whatever works.
Just happy we have viper for Q. Played games, music, youtube and running stable here.
powerserge1 said:
Ok I got it. No need to PM me the profile. Took most of the night but done now.
Would be unable to stay on Q without Viper4Android as well...
Make sure to uninstall all previous versions of Magisk and modules to start fresh.
Install Magisk 19.3 via twrp, install latest Magisk manager and then Busybox (make sure to set up busybox). Some are having problems with this Beta and Magisk so YMMV. Working well for me and no app lag.
On Pie in Magisk you should see Viper4Android 2.7.1 module as available
On Q it's not listed (for me at least) so get it from XDA labs.
Install Viper4Android:
https://labs.xda-developers.com/store/app/download/com.pittvandewitt.viperfx (link to direct download, must be signed in)
Or use this link: https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
The installer will install it as a magisk module. Grant supersu permissions, install driver, phone will reboot.
Install the magisk audio modifications library module. Reboot. After rebooting disable this module (do not uninstall). Reboot again.
Open up Viper4Android. If it asks you to install driver again do so and phone will automatically reboot. Repeat if needed. If driver install remains unsuccessful try enabling and disabling the audio modifications module then try again. What worked for some worked the opposite for others in past threads on previous Android versions and various devices. Here is the thread for reference: https://forum.xda-developers.com/pixel-2/help/viper4android-driver-installation-fails-t3766362
Once driver is installed the app will load properly and under driver status it will probably say "unsupported" and "abnormal". Close the app
Go back into Magisk manager. Now toggle to re enable the audio modifications module. Reboot. (This is the module that allows Viper4Android to process and can help to install the driver)
Upon reboot, Viper4Android should work. Play some music, check the driver status to verify, you may need to toggle off/on master limiter to finally enable it.
For this profile, put the SRS file in OP above in the Viper4Android Kernel folder. Under the apps speaker tab manually input these settings:
Master limiter: On
Playback gain: moderate or 2, max gain 4x, output threshold -1.9db
FIR Equalizer: On. EQ is flat
Convolver: On. Tap convolver then select the SRS inpulse file you placed in the Kernel folder. Cross channel set to 0
Profit.
You can set or disable the viper4android notification icon in the statusbar within the app's settings.
Let me know how the 2 XL's speakers sound Post updated, instructions should be clear enough. Some having problems will need to wait for the updated Magisk. Moving forward, we do have viper4android working on Q. Fully tested on my 2xl and stable with beta 4.
Thanks to @Team_DeWitt
And Dorianx for his profile originally created for the 6p
Click to expand...
Click to collapse
Please forgive me for sounding like a complete tool ..lol but i cant seem to find viper4android app on my phone in the file explore to be able to put the srs file from the dorian zip to the folder in my phone , any help would be greatly appreciated
Mr. Blanco said:
Please forgive me for sounding like a complete tool ..lol but i cant seem to find viper4android app on my phone in the file explore to be able to put the srs file from the dorian zip to the folder in my phone , any help would be greatly appreciated
Click to expand...
Click to collapse
No problem. You are looking for the viper4android folder not the app. See attached screen
powerserge1 said:
No problem. You are looking for the viper4android folder not the app. See attached screen
Click to expand...
Click to collapse
I figured that and searched and searched through internal storage and root directory and i cannot find that app anywhere in my file explorer ..lol this is crazy im using Mixplorer and have attached pics , not sure if i should erase everything and start from scratch again ..lol
Edit: Okay after multiple reboots it magically showed up and was able to put file in correct place but now Driver Status Enabled = no (message) strange ....gonna start over and see if i can get everything working ..lol Thank you for your help @ powerserge1
Edit: Everything up and running and working ... Profit
Mr. Blanco said:
Edit: Everything up and running and working ... Profit
Click to expand...
Click to collapse
Good stuff. To anyone else installing viper just to note if you click on driver and see it as processing = no this does not mean you did anything or the install went wrong. Play a video or music, driver should show as processing yes. When nothing is playing then processing will be no.
Does this enable dual speaker for calls/message alerts?
How did you guys get magisk working on Q beta 4? For me it makes systemui not start on boot and it skips the lock screen entirely. And if it does boot normally, apps take over 10 seconds to launch. I have tried to wipe system data cache and then ran the flash-all bat and still have the issue. A lot of others have the issue on the magisk canary thread. Some don't have it. Someone suggested after a full wipe with -w it fixed it.
joedajoester said:
How did you guys get magisk working on Q beta 4? For me it makes systemui not start on boot and it skips the lock screen entirely. And if it does boot normally, apps take over 10 seconds to launch. I have tried to wipe system data cache and then ran the flash-all bat and still have the issue. A lot of others have the issue on the magisk canary thread. Some don't have it. Someone suggested after a full wipe with -w it fixed it.
Click to expand...
Click to collapse
Looks like I found a solution that is working for several members (and it was purely by accident because installing Magisk threw an error). Uninstall Magisk in TWRP first then:
https://forum.xda-developers.com/showpost.php?p=79682444&postcount=477
powerserge1 said:
Looks like I found a solution that is working for several members (and it was purely by accident because installing Magisk threw an error). Uninstall Magisk in TWRP first then:
https://forum.xda-developers.com/showpost.php?p=79682444&postcount=477
Click to expand...
Click to collapse
It's not working for me. I had to reboot about 4 times because systemui wasn't starting up and I was getting a black wallpaper with no status or nav bar. Finally rebooted normally and at times apps refuse to open but it's slightly better than it was. This is just so weird. Do I really need to wipe my phone or is it magisks fault?
joedajoester said:
It's not working for me. I had to reboot about 4 times because systemui wasn't starting up and I was getting a black wallpaper with no status or nav bar. Finally rebooted normally and at times apps refuse to open but it's slightly better than it was. This is just so weird. Do I really need to wipe my phone or is it magisks fault?
Click to expand...
Click to collapse
Someone in the Android Q discussion thread might be able to help better. Google pulled the beta so it's tough to say whether in your case it's a magisk or android issue. Or both.
I love this post for real, I have a Pixel 3 with Android P, viper v2.7.1.
I had to port the userprofile to the new version, if someone want it, PM me
zxspectrun said:
I love this post for real, I have a Pixel 3 with Android P, viper v2.7.1.
I had to port the userprofile to the new version, if someone want it, PM me
Click to expand...
Click to collapse
Feel free to post it as well. Curious how you were able to port the profile. Looked everywhere but couldn't find any info to convert the old profile to the new preset format.
powerserge1 said:
Feel free to post it as well. Curious how you were able to port the profile. Looked everywhere but couldn't find any info to convert the old profile to the new preset format.
Click to expand...
Click to collapse
I just installed the viper4android mod showed on the screenshot and it ported all my old profiles
attached dorian ported to v2.7.1.0
zxspectrun said:
I just installed the viper4android mod showed on the screenshot and it ported all my old profiles
attached dorian ported to v2.7.1.0
Click to expand...
Click to collapse
Yes it did the same for me. The first time, almost forgot. I did not find the sound to be the same, not even close. Ultimately I still had my Nexus 6p and was able to retrieve the settings and input them manually. Then the sound was as it should be.
Do you find the sound identical with the ported profiles? It might be hit and miss.
Hello there, I've been trying to get the viper4android but it just keep asking me to install the driver.
I've tried with the magisk module and the xda labs version (which looks awesome btw).
I'm on magisk 19.0
My rom is xiaomi.eu 10.4
Any ideas?
Just install a Magisk module or a script to set SeLinux as Permissive. I am using it right now and everything works great.
thunderteaser said:
Just install a Magisk module or a script to set SeLinux as Permissive. I am using it right now and everything works great.
Click to expand...
Click to collapse
huh? can you pm me the module? i cant seem to find it online.
Zontos said:
huh? can you pm me the module? i cant seem to find it online.
Click to expand...
Click to collapse
open magisk manager and go to downloads and search for viper4android, then install. it works just fine.
thunderteaser said:
Just install a Magisk module or a script to set SeLinux as Permissive. I am using it right now and everything works great.
Click to expand...
Click to collapse
I've had trouble installing it, too. Tried every rom posted on this forum, stock MIUI, and some GSI, and in none of them I could get V4A working. Used Magisk Module, too.
Could you please ellaborate how you installed it? Which rom? Which Magisk/V4A version?
Viper is literally the only thing I'm missing from my previous phone; I'd reeeally like to enjoy it again!
metroid2010 said:
I've had trouble installing it, too. Tried every rom posted on this forum, stock MIUI, and some GSI, and in none of them I could get V4A working. Used Magisk Module, too.
Could you please ellaborate how you installed it? Which rom? Which Magisk/V4A version?
Viper is literally the only thing I'm missing from my previous phone; I'd reeeally like to enjoy it again!
Click to expand...
Click to collapse
Have you tried using the XDA Labs version? I had the same problems and that worked pretty well
AdRi_232 said:
Have you tried using the XDA Labs version? I had the same problems and that worked pretty well
Click to expand...
Click to collapse
Yes, I tried that one as well. Always the same error: "No driver installed", press yes, restart phone, and back to "no driver installed" again.
Which busybox version are you using?
Ok, I finally got it.
I'll write it here for anyone with the same problem, or for future reference.
First, check that you have BusyBox installed.
Then, in Magisk Manager, install the Audio Modification Library. Reboot.
In Magisk Manager again, install the Viper4Android module. Install options: new driver, old interface, user app, library workaround no, oneplus 3 workaround yes. Reboot.
Check opening the app, it should work normally, with no "driver not found" errors.
Notes: tried with letsmakecake's Lineage 16. People in the RN7 Telegram group recommend busybox.zip, but I confirm that the stericson app works the same.
If anyone has problems making it work with Poweramp: settings->audio->advanced->
- Direct Volume Control: disabled
- MusicFX: enabled
Then go to the eq screen, second tab, press MusicFX so it's enabled.
Thanks all who helped, and the V4A devs. This is the best audio tweak mod available for Android, hands down.
Personal recommendation: try the Dolby Pro Logic II irs in the convolver!
metroid2010 said:
First, check that you have BusyBox installed.
Click to expand...
Click to collapse
Thanks for guide I will try it.
EDIT: Working fine, thank you
I tried this method and it does not work
---------- Post added at 11:11 AM ---------- Previous post was at 11:09 AM ----------
metroid2010 said:
Ok, I finally got it.
I'll write it here for anyone with the same problem, or for future reference.
First, check that you have BusyBox installed.
Then, in Magisk Manager, install the Audio Modification Library. Reboot.
In Magisk Manager again, install the Viper4Android module. Install options: new driver, old interface, user app, library workaround no, oneplus 3 workaround yes. Reboot.
Check opening the app, it should work normally, with no "driver not found" errors.
Notes: tried with letsmakecake's Lineage 16. People in the RN7 Telegram group recommend busybox.zip, but I confirm that the stericson app works the same.
If anyone has problems making it work with Poweramp: settings->audio->advanced->
- Direct Volume Control: disabled
- MusicFX: enabled
Then go to the eq screen, second tab, press MusicFX so it's enabled.
Thanks all who helped, and the V4A devs. This is the best audio tweak mod available for Android, hands down.
Personal recommendation: try the Dolby Pro Logic II irs in the convolver!
Click to expand...
Click to collapse
what exact version did you use? I tried it with the latest legacy from magisk app and most of the options were changed. and I couldnt get it to work on the RN7
metroid2010 said:
Ok, I finally got it.
I'll write it here for anyone with the same problem, or for future reference.
First, check that you have BusyBox installed.
Then, in Magisk Manager, install the Audio Modification Library. Reboot.
In Magisk Manager again, install the Viper4Android module. Install options: new driver, old interface, user app, library workaround no, oneplus 3 workaround yes. Reboot.
Check opening the app, it should work normally, with no "driver not found" errors.
Notes: tried with letsmakecake's Lineage 16. People in the RN7 Telegram group recommend busybox.zip, but I confirm that the stericson app works the same.
If anyone has problems making it work with Poweramp: settings->audio->advanced->
- Direct Volume Control: disabled
- MusicFX: enabled
Then go to the eq screen, second tab, press MusicFX so it's enabled.
Thanks all who helped, and the V4A devs. This is the best audio tweak mod available for Android, hands down.
Personal recommendation: try the Dolby Pro Logic II irs in the convolver!
Click to expand...
Click to collapse
Alright, can confirm this works, with some minor differences:
-new interface (just personal preference)
-library workaround was applied automatically
I also have selinux permissive and MusicFX disabled (app frozen).
The package I used is Viper4Android FX Legacy. The new version, Viper4Android 2.7, did not work for me.
My ROM is HavocOS.