Database Users

How to get into Download Mode

Samsung Vibrant Download Mode
Method 1 (without ADB):
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (screen turns on when plugged in) EX: Shows a battery, shows error messages if bricked, etc. Shows anything.
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold both the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
This is how I got into download mode to fix my 'odd' brick.
Method 2 (with ADB):
1. Turn your phone on
2. Go to Settings -> Application Settings
3. Enable Debug Mode
4. Plug your phone into your PC
5. Install Android SDK
6. Open Command Prompt
7. Type: cd C:\android-sdk-windows\tools
8. Type: adb reboot download
Either of these methods *should* get you into Download mode. After that you should be able to use Odin to revert to stock, tar and instructions here:
http://forum.xda-developers.com/showthread.php?t=734475
Or flash anything with Odin.

I am in a situation where I rooted my phone but never made a recovery and now I did a factory reset and I only get a force close loop when booting and cannot do anything. I am not able to get into debugging mode to use ADB and the hardware buttons are not working any suggestions on how I can fix this
The only thing i did was remove some bloatware which is why I did not do a recovery since I wasnt removing anything important. Phone worked fine until I tried to do the factory reset now everything just force closes and cannot do anything

I turned my phone on then removed battey. hold vol up and down together then plug the phone in via usb to pc, should enter download mode after a few seconds (don't press the power button at all)I use odin to flash back to stock.

THANKS!
This saved my ass lol I was lookin at it like wtf? cuz odin failed and then when i reloaded and tried again nothing happened so i unplugged. I don't know what I was thinking when I did it, but I did lol.
Thanks again bro

sparks.calvin said:
I am in a situation where I rooted my phone but never made a recovery and now I did a factory reset and I only get a force close loop when booting and cannot do anything. I am not able to get into debugging mode to use ADB and the hardware buttons are not working any suggestions on how I can fix this
The only thing i did was remove some bloatware which is why I did not do a recovery since I wasnt removing anything important. Phone worked fine until I tried to do the factory reset now everything just force closes and cannot do anything
Click to expand...
Click to collapse
just Odin back to stock and start over there is realy no other way to fix fc

OP: what youre doing in your hardware button combinajtion method is lettinf it boot, then pressing the up+down vol and doing a hardware reset (by holding power key). You can cut oout a step by holding tthe up down keys when you plug in. It should boot to download automatically.
Also, you should mention in your post that the button combination is different for people who flashed gingerbread bootloaders..
Another thing, i believe the newer android sdk moved the adb package to C:/android-sdk/platform-tools/ ..
To tthe person with the force close issue, read the OP, go into download mode and use odin to flash to stock.
Sent from my SGH-T959 using XDA App

Cannot boot even into download mode after changing Fast Dormancy setting

Hi,
I thought I could enter the Hidden Menu and change the Fast Dormancy setting into disabled, so I did it and wanted to reboot my phone. The phone turned off, and was doing its boot up procedure, while it started behaving abnormally. The LG logo popped up for about 5 seconds (so it didn't leave the bootloader), turned off for 10 seconds and then again the whole process repeated. I thought that was a bootloop, so I turned it off, entered Factory Reset menu, chose appropriate options and waited for the reset, but the phone didn't perform the action. Then I tried to get into download mode, but to no avail - the phone kept going with bootloop. I'm still struggling to do this; the only menu I could get into was the Factory Reset one.
Could anyone help me get my phone back into function?
D802, 20G stock
Thanks in advance!

That's weird. I always disable fast dormancy after a reset or a new rom flash and I've never had any issues.
What comes instead of download mode? If nothing, Are you sure you're doing it correctly?
Press and hold the power button for 10-15 seconds.
Plug the phone into the cable, then press and hold volume up and plug the cable into the computer. That should trigger download mode.

Thank you for your help.
I know that's weird, I've entered Download mode numerous times using the combination that you provided and can't do it this time. The strangest thing actually is that the factory reset menu does show up (though it does nothing), while Download mode does not - it seems to be actually unaffected by using the combination and is still stuck in a bootloop. I have no idea what steps should I take in order to recover my phone.
I forgot to mention that the phone wasn't even rooted then, which makes it even more mysterious...

Ouch! Well what comes up when you enter download mode? Fastboot? Black screen?
If you're still covered by warranty take it for a replacement. I doubt fast dormancy alone has messed up your device. If it truly has, then try booting the phone without a sim card.

Normally when I insert the USB cable with vol up button pressed, the LG logo shows up, then the notification of Download mode and finally the Software Update screen. But this time, only the LG logo shows for about 5 seconds, as if I normally booted it using Power button and does not get me into neither Download nor Fastboot mode.
Well, I took a look at other options in this hidden menu, but still, could it brick that hard even then?
I doubt whether I'm still eligible for a replacement, as the device had been rooted already (though it's not at the moment). The whole process also takes quite a lot of time, which is why I wanted to avoid it. Is there any method to bring it back to life?

I wanted to revive my phone using the method linked with flashing the whole partitions onto my phone, but Ubuntu didn't even notice that any drive was connected...
Am I doing something wrong? I mean e.g. is the combo Vol Up + cable still the same in D80220G? Is there any other way of accessing the phone through my computer? Can I somehow stop this bootloop from continuously happening? Doesn't the fact that I can get into Factory Reset menu help in any way?
Thanks for your help in adavnce!

Help - Locked safe mode

Hi there. Im Dante, from Argentina.
I own a LG G2, for a year now, and I never had a problem. Never installed a mod, just the stock configuration. Yesterday the phone screen got stuck out of nowhere, so I had to reset it holding the power button. When it reseted, it entered safe mode and now I can't get it out. I reseted several times, uninstalled apps and I did a software factory reset. Nothing, it still starts in safe mode.
I tried to do a hardware factory reset but when it asks to confirm by pressing the power button, nothing happens when I press it.
It's getting to my nerves and I don't know what to do.
Can someone please help? Thanks in advance.

Morke said:
Hi there. Im Dante, from Argentina.
I own a LG G2, for a year now, and I never had a problem. Never installed a mod, just the stock configuration. Yesterday the phone screen got stuck out of nowhere, so I had to reset it holding the power button. When it reseted, it entered safe mode and now I can't get it out. I reseted several times, uninstalled apps and I did a software factory reset. Nothing, it still starts in safe mode.
I tried to do a hardware factory reset but when it asks to confirm by pressing the power button, nothing happens when I press it.
It's getting to my nerves and I don't know what to do.
Can someone please help? Thanks in advance.
Click to expand...
Click to collapse
Start your device in Download Mode and flash Stock Rom. More info here:
http://forum.xda-developers.com/showthread.php?t=2432476

Thanks for the answer
Download mode is not working
When I hold the vol up button and connect the USB, only the charging icon appears.

Morke said:
Thanks for the answer
Download mode is not working
When I hold the vol up button and connect the USB, only the charging icon appears.
Click to expand...
Click to collapse
Please help
The device starts up in Safe Mode and I can call and recieve SMS but I can't get it out of safe mode. I can't enter download mode (the phone shows 100% battery charge when connected to the PC) and I can't enter bootloader so I can't flash anything.
It's soft bricked I think

Morke said:
Please help
The device starts up in Safe Mode and I can call and recieve SMS but I can't get it out of safe mode. I can't enter download mode (the phone shows 100% battery charge when connected to the PC) and I can't enter bootloader so I can't flash anything.
It's soft bricked I think
Click to expand...
Click to collapse
Make a huge your phone is off wen connecting the USB cable and holding volume button.
Make share u have installed correct drivers

maydayind said:
Make a huge your phone is off wen connecting the USB cable and holding volume button.
Make share u have installed correct drivers
Click to expand...
Click to collapse
Yes, I have the drivers installed and also the phone is off when im conecting the USB Cable. Nothing happens, just the 100% charging animation

same problem. volume down button doesn't work after dropped my phone into water and stuck on safe mode. Don't enter download mode as said above. what to do? any suggestions?

A1 Suddenly Dead

Hi
i bought before 2 weeks Xiaomi a1
it wored very good.
Today while I wanted to turn on the screen it did not respond.
The phone is not responding to any type of pressing.
I must say that the phone is new, did not get any kind of hit , and 5 min before this problem it used to work really good.
I think that the phone is in brick mode, and i can't enter to fastboot option because the phone is not responding....
Pls help my solve this problem.
Thanks

Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.

Has that still not been fixed with November update? I turned my ambient screen back on to see. So far, 2 days since update and no black screen after notification.

I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.

micleftic said:
Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.
Click to expand...
Click to collapse
I cant even turn on the screen...
It's not showing any thing on the screen.
I tried to push the power but there is no respond

myself379 said:
I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.
Click to expand...
Click to collapse
I tried forcing it. But it is still show black screen.
I think it is in brick mode

roy123456 said:
I tried forcing it. But it is still show black screen.
I think it is in brick mode
Click to expand...
Click to collapse
Just go in fastboot mode and reflash the firmware from MIUI.con

jack_21 said:
Just go in fastboot mode and reflash the firmware from MIUI.con
Click to expand...
Click to collapse
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.

roy123456 said:
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.
Click to expand...
Click to collapse
You must keep pressed vol down + power until the phone does show "FASTBOOT"

jack_21 said:
You must keep pressed vol down + power until the phone does show "FASTBOOT"
Click to expand...
Click to collapse
How long?
I tried it for 3 min ...
Is it enough?

roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
Well there is something strange.
Leave the phone discharge
Then let it charge
Then power on with vol down + power

Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.

selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
What can I do if it is a hard brick?

roy123456 said:
What can I do if it is a hard brick?
Click to expand...
Click to collapse
Visit customer care(they will probably say motherboard problem as always) or try qfil method which is quite complex if this flashing things are new to you.

roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
you should press the power key while charging cable connected.If it doesn't work , unplug the charging usb and plug again reverse(type c's reversibility).If it can't, try with another AC source,another person,another location.
My A1 reborn by my gf's charging adaptor,hand and location.(she know nothing about android hard key combination)
Just thinking,don't know exactly.Sorry for my english.

My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else

ruhi maallivk said:
My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else
Click to expand...
Click to collapse
reflash phone with stock firmware in fastboot mode on MI FLASH TOOL

selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot

Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You switched off the phone in middle of installing ota, best bet is take it to the take it to the service center and tell them phone not switching back on after installing August ota update.
Or if not in warranty then try to install stock rom using qfil.

Unfortunately you have bricked your Mi A1
Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You have bricked your Mi A1, when you turned it off while installing/flashing the August update. Basically you should never turn a smartphone off, or disconnect the USB cable (if it is connected), while flashing its ROM.
There are various methods to unbrick it, I suggest you try this one since it's apparently not going into fast boot:
[Experimental]Recover Hard Bricked Xiaomi A1 Using SD Card

Galaxy A40 infinite loop - impossible to turn on

Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!

The download mode for this model is different from previous Samsung's :
IIRC, with the phone off, you need to hold VolumeUp and VolumeDown, then plug in the USB cable connected to a computer (you may need to press Power to power up the phone, I can't recall properly).
From there, you should be able to restore a stock ROM with Odin.
Let us know if it helped !

gmarko247 said:
Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!
Click to expand...
Click to collapse
Here the same problem, have a40 in loop and never get rocgnized for computer, tryed many different cables, and installed a booring large amount of drivers software and nothing...

you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)

aIecxs said:
you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)
Click to expand...
Click to collapse
Generic answers, repeated 800 times why really need to waste a post with that? and that not was the problem:
1- For no usb recognition, is this phone bad design, in the back tap where is the battery in the samsung logo more or less if you push with fingers and charge is because the design of baterry is so crap and your usb port goes off when the under tap cable moves or just get little out of conection. If you can get working after push, usb on phone will do too.