Related
Hi,
So as many of you already knew - I'm working on porting CM13 onto my NU3001.
I has it on my desk table, so I could work on it during my days. (I have another NR3001 installed in my car)
I already made some work for our unit SW. This is quick screenshots. Sources based on xdAuto and CM13. This is a very BETA and many things not working for now.on.
Why? : When I realize than CyanogenMod 13 (6.0.1) works on my Motorola XT1080 better than stock - I start thinking of porting CM13 to our device. And when I have spare set - I start porting.
How? : I took easiest way - try to do not modify kernel a lot, instead adopt bionic and other libraries for out 3.0.36+ kernel.
Currently working staff (it is very beginning):
1. Recovery TWRP 3.0.2
2. CM13 (LineAge OS) booting.
3. Graphics working (there is some blinking present).
4. Wifi working
5. Android audio working
6. Bonovo Radio working
4. Most of the rest is on the way (GPS, BT, rest of Bonovo apps)
UPDATE_1:
I decide to do not stuck with CM 13 and switch to AOSP N release (7.0) (mostly because on my daily job - we also going to Android N, so it should be more familiar to me now)
Currently working staff:
1. Recovery TWRP 3.0.2
2. SELinux needs to be carefully ported (kernel part), cause starting from 7.0 is can not be disabled (as I did for CM13 to easy port)
During this port I will try to minimize inpact to AOSP release, so any future updates should be much more easier.
For you to understanding of amount of needed work - kernel already has 100+ patches on top of xdauto release. Approximate left about 250-300 patches to revise/port.
Android 7.0 port abandoned because of bigger and bigger amount of work need to be done to port SELinux on top of our outdated kernel.
UPDATE2:
I setup review build environment, so who want to look at NOT-FULLY-WORKING CM13 could download sources and binaries. I do not provide instructions how to flash it, because who wants to look and contribute already know hot to flash, and who doesn't probably don't really want this NOT-FULLY-WORKING CM13
UPDATE3:
So I finally managed to get functional networking. So now Wifi working, internet working, display working.
I starting to port all necessary items. No more 'hard' showstoppers so far.
New build (I believe it is build number 5) should be ready in an our on build server, so I could test it more fully.
UPDATE4:
Cause CyanogenMod is no more maintained - switched to it's successor Lineage OS 13.0, starting from build 8
UPDATE5:
Build number 15 has working audio + radio
UPDATE6:
Most of Bonovo changes ported, new build 20 ready.
This build contains zip file which should be flashable via twrp, but I not test it this way.
Issues remaining so far(most noticeable to me):
1. Display flickering (my suspect is to vsync/fence mechanism slightly changed in Android 6.0, need to investigate)
2. HW Volume buttons not working on device
3. No audio In
UPDATE 7:
Starting from build 23 following images available:
cm_rk3188-ota-XX.zip - update to use via TWRP
nu3001-la-cm13-XX-userdebug.tar.gz - build image for flash via command line rkflashtool under linux (full or partial flash)
rkflash_nu3001-la-cm13-XX-userdebug.zip - Full image to be flashed via PC GUI RK Batch Tool.
kernel_nu3001-la-cm13-XX-userdebug.tar.gz - just kernel with debug symbols for debugging purposes.
To just download sources:
repo init -u https://gerrit.nc.org.ua/manifest -b nu3001_cm13
If you plan to contribute - login to Gerrit with GMail, push your SSH public key, choose login name and then do:
repo init -u ssh://<user>@gerrit.nc.org.ua:29418/manifest -b nu3001_cm13
Builds will be available on Jenkins build server (login also via GMail, PM for access grant on current project stage):
https://jenkins.nc.org.ua/
1.5 GB folder on MEGA
4 files
mega.nz
Please do not spoof this thread with questions like "When?", I will try to post updates regularly in this message.
This thread created is mostly to exchange experience with this build once it is published (issues, TODOs, etc)
**Reserved **
First!
Second! Lol
I'm not a developer so unfortunately I can't contribute, but hopefully those who can will.
At the very least I can beta test when its a little more complete.
Android port system less complicated than the application Bonovo.app and MCU. Good luck and patience.
Black're a legend !!
Your project is great !!! see Android 6.0 on Carpad would be great.
Thanks for the great effort you make for all
Woooow great !!
Good luck
nice one, i hope a very important feature:
"that can be use apps, which require android +4.4.4, like lollipop"
I say that because android auto "stand alone" coming soon, so if will be possible install this app in the radio, we have android auto pure, ( not automate that is awesome but is not the same like original ), and maybe mp3 stuttering from usb can be solved in this rom.
keep up work!
Thanks for the sneak peak, looks promising. I'll gladly help sponsor a new device if you happen to brick yours. I love this headunit and how far the community has gotten in supporting it.
I want to buy NU3001 now, is there any way to get it?
vivacious said:
I want to buy NU3001 now, is there any way to get it?
Click to expand...
Click to collapse
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
VBlack said:
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
Click to expand...
Click to collapse
I want NU3001 because it has hdmi option. But check in aliexpress newsmy store said it is no production now. Is there someone have stock?
---------- Post added at 01:48 AM ---------- Previous post was at 01:43 AM ----------
VBlack said:
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
Click to expand...
Click to collapse
I want NU3001 because it has hdmi option. But check in aliexpress newsmy store said it is no production now. Is there someone have stock?
vivacious said:
I want NU3001 because it has hdmi option. But check in aliexpress newsmy store said it is no production now. Is there someone have stock?
Click to expand...
Click to collapse
I just put NU3001 to aliexpress search bar and found a lot of propositions, I think there should be available one.
Hi VBlack,
it's nice to know you're making progress on the new ROM CM13. All are rooting for you !! Your work would be wonderful !!
I have only one question:
With the ROM of XDAuto I found an annoying problem that occurs when i turn off and then relight the Carpad.
When the power back very often the Carpad car remains with black screen until i touch it with my finger.
I think the problem is somehow related to the USB ports.
Even with your ROM does this happen ?? When you turn on the car, the Carpad remains ever with black screen ??
Thank you!!
VBlack said:
NU3001 or ROM ? if you want NU3001 - you should go to aliexpress from wiki link. If ROM - it is not ready yet. I have half-working CM13.0 - no connectivity working (wifi, bt) so it is useless for now, and Android 7.0 porting in progress.
Click to expand...
Click to collapse
Do you have your efforts posted on github anywhere? Would you mind doing so?
There is a chance I may be working on these devices again after all, and having a working CM provides a *LOT* of possibilities. Namely the Theme engine.
If you would be willing to post your work, I'm sure there are a handful of us who could help with the port.
Thanks,
Zaphod-Beeblebrox said:
Do you have your efforts posted on github anywhere? Would you mind doing so?
There is a chance I may be working on these devices again after all, and having a working CM provides a *LOT* of possibilities. Namely the Theme engine.
If you would be willing to post your work, I'm sure there are a handful of us who could help with the port.
Thanks,
Click to expand...
Click to collapse
Nice to hear from you. Sure I will share. Current situation is next:
CM13 - no wifi (looks like netfilter from userspace not match netfilter from our outdated kernel), no selinux (completely disabled), and increased system partition to be able to add opengapps, twrp - works.
AOSP 7 - it is strongly rely on selinux, so i could not just disable it, and now I'm trying to merge new selinux with our old kernel...
So, i will upload CM13 in current state, and continue on aosp 7, if i fail with aosp 7 i will back to cm13. This is current plan.
Sent from my DROID MAXX using Tapatalk
Zaphod-Beeblebrox said:
Do you have your efforts posted on github anywhere? Would you mind doing so?
There is a chance I may be working on these devices again after all, and having a working CM provides a *LOT* of possibilities. Namely the Theme engine.
If you would be willing to post your work, I'm sure there are a handful of us who could help with the port.
Thanks,
Click to expand...
Click to collapse
I update first post with sources and build information
@VBlack, you mention "our outdated kernel". Does this imply that the kernel sources aren't available? I am very interested in this project because I am looking for a head unit with fully update firmware that can be kept up to date with security patches, and some of the Android security patches include the kernel (e.g. the recent "dirty cow" vulnerability).
shatteredsilicon said:
@VBlack, you mention "our outdated kernel". Does this imply that the kernel sources aren't available? I am very interested in this project because I am looking for a head unit with fully update firmware that can be kept up to date with security patches, and some of the Android security patches include the kernel (e.g. the recent "dirty cow" vulnerability).
Click to expand...
Click to collapse
No, we have kernel sources, but our kernel version 3.0.36 and looks like nobody release Android kernel 3.14 or 3.18 for rk3188. 3.14 and 3.18 mostly used in Android M and N. So combining Android M or N with such outdated kernel is not a trivial task. Because of this incompatibility we currently have all networks issue on this CM13 project.
Kernel 3.0.36 is 4.5 years old. The 3.0 branch is no longer maintained with security patches, and hasn't been maintained in over 3 years. There have been numerous security exploits in the Linux kernel since then, many of which are applicable to Android. Is it worth even persevering with this under such an extreme kernel constraint?
shatteredsilicon said:
Kernel 3.0.36 is 4.5 years old. The 3.0 branch is no longer maintained with security patches, and hasn't been maintained in over 3 years. There have been numerous security exploits in the Linux kernel since then, many of which are applicable to Android. Is it worth even persevering with this under such an extreme kernel constraint?
Click to expand...
Click to collapse
You'd be surprised how many phones in the market use old kernels (3.0 is not too old for Android - it is about 2-3years off from active development).. But true is that Android kernel despite it's version less vulnerable than Desktop one, and has many fixes included (it is does not increase kernel version, like mainline kernel). Because of this it is generally hard to say which security issue will be there for sure. But on the other hand Android N and Android M has SELinux enabled, and Android N could not have it disabled. It is dramatically increase overall security of the system. But for the most of traditional Android user kernel exploits does not produce many harm - it is not a corporate server with sensitive information. And many of them used to obtain root on bootloader locked systems.
So generally for what I have in mind:
1. If succeeded just with CM13 - I have disable SELinux there - it is will be not less secure than original 4.x release - just system/google components will be upgraded, which allow us use modern UI features from Android M, and also adds more compatibility with new applications revisions.
2. If succeeded with AOSP 7.0 - SELinux will be enabled there, so we will have security addition on top of old kernel, which actually will increase security alongside allowing UI features from Android N.
So in any case it is very nice to have.
It's hard to pin down the Android codename in advance thanks to Google's notorious trolling. Remember Key Lime Pie and Milkshake? This time, everyone's first guess turned out to be the right one. Google has named Android 8.0 "Oreo" after the cookies produced by Nabisco.
Most Android names are generic treats like Marshmallow and Nougat. However, this is not the first time Google has worked with a company to use a name brand. KitKat was a surprise announcement in 2013. The agreement between Google and Nestle/Hershey includes some cool limited edition KitKat candy bars, too. It is unclear if there will be similar Android-themed Oreo packaging, but Google must have some manner of agreement allowing it to use the Oreo trademark. The statue does at least look a bit more daring than other recent bugdroid mascots.
There's not much new to report on the features in Oreo—we've been playing with the developer preview for months, after all. You can expect picture-in-picture support for apps, autofill apps, faster boot times, and those god-awful new emoji. Oreo is being rolled out to AOSP today, and updates for the Pixels and recent Nexus devices are in final testing now. You can expect the OTA soon on those devices.
Google has just announced that Android 8.0 Oreo will be uploaded to the Android open Source Project today, and that updates to the newest version of the platform are currently being tested by carriers for the Google Pixel, Nexus 5X, and Nexus 6P. Google says these updates will begin rolling out in phases "soon," along with updates for the Pixel C and Nexus Player.
Google has not clarified when factory images or OTA files will be available for devices at this time.
As a reminder, Android Oreo brings a number of new features to the table, including notification dots, enhanced speed, a brand-new set of emoji , more aggressive battery life management, and [finally] OS-level autofill.
Source : Google, AndroidPolice
Android 8.1 is the next version of the OS, Google app reveals..
Android 8.0 Oreo has only been out for a couple of weeks at this point, and hasn't actually made it to every single supported Nexus and Pixel device out there yet. Not to mention how long it's going to take for it to land on any other phone or tablet.
Even so, maybe you'd like to know what the next version of the OS will be? It's Android 8.1, by the way. This has been revealed by a teardown of the latest iteration of the beta Google app. The SDK used internally by the company to build said app outright says so.
As for the name, it makes most sense for Google to keep using Oreo - it would be a shame to switch from such a well recognized brand so soon, and it's also how it did things last year with 7.0 and 7.1 both being Nougat. If you're wondering when 8.1 will hit, remember that in 2016 Android 7.1 debuted with the Pixels only a couple of months or so after 7.0 updates started going out. So we assume that this year the second-gen Pixels will be the first devices to launch running Android 8.1, when they land in October.
Source : - Google, GSMARENA
Google announces Android 8.1 developer preview, final release planned for December
Google launched the new Pixel phones with Android 8.0, which is what last year's Pixel's have been running since the update. A new version of Oreo is on the way, though, and you can try it right now. Google has launched a developer preview for Android 8.1. As usual, it's supported on recent Google devices and can be installed in two ways.
The system images are available for download now, but that requires an unlocked bootloader. The beta program with automatic OTA updates will be available as well. You can sign up now, but it looks like the switch hasn't been thrown to push out the OTAs just yet. If you want to get on the dev preview, it's compatible with the following devices. The OTA files are available for sideloading, though.
Nexus 5X
Nexus 6P
Pixel C
Pixel
Pixel XL
Pixel 2
Pixel 2 XL
The Android 8.1 preview runs from today until the OS is released, which Google expects to happen in December. Installing the preview should not affect your data, but you never know. Running a developer preview does come with some risk, so make sure you've got your data backed up. Leaving the beta program will result in a device reset as well.
Google has a developer-oriented changelog up. Here's what you can expect in the new version.
Neural networks API: The Neural Networks API (NNAPI) provides apps with hardware acceleration for on-device machine learning operations. The API supports on- device model creation, compilation, and execution.
Notifications: Apps can now only make a notification alert sound once per second. Alert sounds that exceed this rate aren't queued and are lost. This change doesn't affect other aspects of notification behavior and notification messages still post as expected.
Improved targeting for low-RAM devices
Autofill framework updates: custom descriptions that the Android System shows in the autofill save UI, specify a Validator object that your app can use to decide if the Android System should show the autofill save UI, and more.
EditText updates
Programmatic Safe Browsing actions: Devs can control whether an app reports known threats to Safe Browsing, and have the app automatically perform a particular action—such as going back to safety—each time it encounters a URL that Safe Browsing classifies as a known threat.
Video thumbnail extractor: The MediaMetadataRetriever class has a new method, getScaledFrameAtTime(), that finds a frame near a given time position and returns a bitmap with the same aspect ratio as the source frame, but scaled to fit into a rectangle of given width and height.
Shared memory API: Android 8.1 (API level 27) introduces a new SharedMemory class. This class allows you to create, map, and manage anonymous shared memory that can be used by multiple processes or apps.
WallpaperColors API: Adds support for managing wallpaper colors. This feature lets you create a WallpaperColors object from a bitmap, a drawable, or by using the first three most visually representative colors. You can also retrieve details of the first three noticeable colors of a wallpaper.
Fingerprint updates
Source - AndroidPolice, Google
DISCLAIMER
Code:
[LIST]
[*]Your warranty is now void.
[*]I am not responsible for bricked devices, dead SD cards,
[*]thermonuclear war, or you getting fired because the alarm app failed.
[*]before flashing it! YOU are choosing to make these modifications, and if
[*]you point the finger at me for messing up your device, I will laugh at you.
[/LIST]
List of Android 8.0 / 8.1 Oreo Based Beta / Alpha Rom's
Osprey
1. [ROM]AospExtended ROM V5.2 [OSPREY]
2. [ROM][osprey] Unofficial LineageOS 15.0 by Alberto97
3. [ALPHA] AOSP 8.0.0 r17 [UltraDevs] [OSPREY] [5 OCT Patch]
4. [ROM]crDroid Android 4.0 [OSPREY] [UNOFFICIAL]
5. [ROM]Xenon HD [OSPREY] [UNOFFICIAL]
6. [UNOFFICIAL][OREO]XPerience 12.0.0
7. [ROM][OSPREY]OFFICIAL]Pixel Experience [AOSP]
8. [ROM][osprey] The Android Open Source Project
9.[ROM]CosmicOS 3.0 Chronus for Osprey[UNOFFICIAL]
10.[Osprey][8.0.0][Unofficial] Ground Zero ROMs || Validus [Beta][GZOSP]
11.[Osprey][VoLTE][AOSCP]CypherOS-5.1[UNOFFICIAL]
12.[ROM]LineageOS 15.1 [OSPREY/MERLIN] [UNOFFICIAL]
13.[ROM][Osprey]ResurrectionRemix v6.0.0[UnOfficial]
Merlin
1. AospExtended 5.2 for Moto G Turbo/Merlin!! By Innfinite4evr
2.[ROM][Merlin]ResurrectionRemix v6.0.0[UnOfficial]
3.[ROM][8.0.0] crDroid Android 4.0 [OSPREY/MERLIN] [UNOFFICIAL] By althafvly
4.[ROM][Merlin]OFFICIAL]Pixel Experience [AOSP]
Official OpenGapps for Oreo 8.1 has been released but still it's in Betahttp://opengapps.org/
TWRP
Osprey
[TWRP][osprey] TWRP for Moto G 2015
Merlin
[TWRP][merlin] TWRP for Moto G Turbo
Reviews For the Android 8 / 8.1 Based Alpha Rom's
LOS 15 Osprey Alpha Build
Battery Review - https://forum.xda-developers.com/showpost.php?p=73793250&postcount=381
In - Depth Review - https://forum.xda-developers.com/showpost.php?p=73928613&postcount=499
AospExtended ROM V5.0 [OSPREY] Alpha build
General Review - https://forum.xda-developers.com/showpost.php?p=74008848&postcount=37
In - Depth Review - https://forum.xda-developers.com/showpost.php?p=74097172&postcount=140
AOSP 8.0.0 r17 [UltraDevs] [OSPREY] Alpha build
General Review - https://forum.xda-developers.com/showpost.php?p=74107538&postcount=24
The Android Open Source Project 8.0
General Review - https://forum.xda-developers.com/showpost.php?p=74622199&postcount=32
Battery Review - https://forum.xda-developers.com/showpost.php?p=74640229&postcount=40
[Osprey][8.0.0][Unofficial] Ground Zero ROMs || Validus [Beta][GZOSP]
General Review - https://forum.xda-developers.com/showpost.php?p=74691620&postcount=12
Battery Review - https://forum.xda-developers.com/showpost.php?p=74692903&postcount=13
[ROM][8.1.0_r1] Pixel Experience [AOSP][OSPREY][UNOFFICIAL]
General Review - https://forum.xda-developers.com/showpost.php?p=74845271&postcount=47
rahul9999 said:
Initial manifest for official Lineage 15.0 has been Created today,
So they have started working on this
Source : - Initial manifest for Lineage 15.0
Click to expand...
Click to collapse
That's pretty cool. My guess is that the first Oreo ROM for our osprey is going to be Lineage OS 15.0.
This time arround, Lineage should be the first one, since there is no fiasco like Nougat's two major releases at once (7.0 and 7.1.1). Remember how people used to get CyanogenMod 14.0 internal sources and put them into Nougat 7.0 ROMs for the osprey? Back then I used to love BeanStalk because it was pretty much the most stable Nougat ROM for my osprey. There was a bug with video recording but I was ready to trade new features for video recording.
nicolasmart said:
That's pretty cool. My guess is that the first Oreo ROM for our osprey is going to be Lineage OS 15.0.
This time arround, Lineage should be the first one, since there is no fiasco like Nougat's two major releases at once (7.0 and 7.1.1). Remember how people used to get CyanogenMod 14.0 internal sources and put them into Nougat 7.0 ROMs for the osprey? Back then I used to love BeanStalk because it was pretty much the most stable Nougat ROM for my osprey. There was a bug with video recording but I was ready to trade new features for video recording.
Click to expand...
Click to collapse
I cant wait man. I need my cookie fix.
rahul9999 said:
Initial manifest for official Lineage 15.0 has been Created today,
So they have started working on this
Source : - Initial manifest for Lineage 15.0
Click to expand...
Click to collapse
I'm not a fan of Lineage. I think I'll stick with CAF rom. It's the best I've ever flashed and the longest I've stayed with a rom.
melp57 said:
I'm not a fan of Lineage. I think I'll stick with CAF rom. It's the best I've ever flashed and the longest I've stayed with a rom.
Click to expand...
Click to collapse
paranoid android is the best one.......caf roms are always better than los........though old build,you may try cosmic os....it is made by shubham singh and caf based............thats good too........but aospa 7.2.3 works like a charm..........it is my daily driver
With the support of Great Developers we should surely get Android Oreo for our device.. Also a CAF Based Rom but it will take a time as usual... Not sure how much time take for PA..
As i can see a work for Lineage 15 is going on very well & i think this would be our first Oreo ROM..
RijuSarkar13 said:
paranoid android is the best one.......caf roms are always better than los........though old build,you may try cosmic os....it is made by shubham singh and caf based............thats good too........but aospa 7.2.3 works like a charm..........it is my daily driver
Click to expand...
Click to collapse
I've tried aospa but I don't really like it. It's not that stable for me on osprey, the Qualcomm camera doesn't work and I needed another camera app, PACKAGE INSTALLER WAS MISSING!!! I WASN'T ABLE TO INSTALL APKs, even through recovery. I needed to re-install it to make package installer work. Also, it's not that customizable. Not that Default Lineage is but after installing substratum, everything is perfect.
Sticking with LOS 14.1 + Open Gapps + Kali Nethunter until Lineage 15 gets released.
nicolasmart said:
I've tried aospa but I don't really like it. It's not that stable for me on osprey, the Qualcomm camera doesn't work and I needed another camera app, PACKAGE INSTALLER WAS MISSING!!! I WASN'T ABLE TO INSTALL APKs, even through recovery. I needed to re-install it to make package installer work. Also, it's not that customizable. Not that Default Lineage is but after installing substratum, everything is perfect.
Sticking with LOS 14.1 + Open Gapps + Kali Nethunter until Lineage 15 gets released.
Click to expand...
Click to collapse
I launched so many apps with package installer...that's not roms fault...for example I installed nova Google companion from apkmirror and few other apps..not a single problem...Qualcomm camera got better in 7.2.3...though Moto z camera is always better...it has not much customisation and that is it's uniqueness...I always feel I am using a stock Moto so much improved ROM...I just love the aospa...
RijuSarkar13 said:
paranoid android is the best one.......caf roms are always better than los........though old build,you may try cosmic os....it is made by shubham singh and caf based............thats good too........but aospa 7.2.3 works like a charm..........it is my daily driver
Click to expand...
Click to collapse
The CAF rom is updated.
---------- Post added at 07:03 PM ---------- Previous post was at 07:01 PM ----------
rahul9999 said:
With the support of Great Developers we should surely get Android Oreo for our device.. Also a CAF Based Rom but it will take a time as usual... Not sure how much time take for PA..
As i can see a work for Lineage 15 is going on very well & i think this would be our first Oreo ROM..
Click to expand...
Click to collapse
Can't thank our Osprey Dev enough! This device is 2 yrs old and still going strong.
melp57 said:
The CAF rom is updated.
---------- Post added at 07:03 PM ---------- Previous post was at 07:01 PM ----------
Can't thank our Osprey Dev enough! This device is 2 yrs old and still going strong.
Click to expand...
Click to collapse
Yes.. All credits goes to Great Dev Like @Alberto97 @ishubhamsingh @ Arcadee & Many more
melp57 said:
The CAF rom is updated..
Click to expand...
Click to collapse
which one is updated? cosmic os?
RijuSarkar13 said:
which one is updated? cosmic os?
Click to expand...
Click to collapse
Sorry, pa
...
Guy's... Thread Subject edited Related to Android Oreo development.. So instead of spamming any other active threads you can post here...
Also please bear in mind Don't ask for ETA for any Android Oreo ROM... It's against XDA Rules..
Our official Lineage Os maintainer @Alberto97 successfully booted Lineage Os 15 ROM on our device while testing..
So guys be patient development is going great & as per this source we will surely get official Lineage Os 15 ROM based on Android 8 Oreo
Poll added related to which Android Oreo Based Rom your waiting for..
rahul9999 said:
Our official Lineage Os maintainer @Alberto97 successfully booted Lineage Os 15 ROM on our device while testing..
So guys be patient development is going great & as per this source we will surely get official Lineage Os 15 ROM based on Android 8 Oreo
Click to expand...
Click to collapse
Love to get my hands on what he flashed!
EDIT: nice poll!
edit: lots of threads out there saying how to flash oreo on any phone, but the fine print says only nexi and pixili.
edit: seems like Lineage by the end of this year which is fantastic. I assume both 14.1 and 15.0 will be running side by side for quite a while.
edit: Added to my sig to help folks fine it.
edit: @rahul9999 you might put in your sig... that's a very easy way to advertise it w/o breaking xda rules or going off track!!! and when was your English ever bad!
KrisM22 said:
Love to get my hands on what he flashed!
EDIT: nice poll!
edit: lots of threads out there saying how to flash oreo on any phone, but the fine print says only nexi and pixili.
edit: seems like Lineage by the end of this year which is fantastic. I assume both 14.1 and 15.0 will be running side by side for quite a while.
edit: Added to my sig to help folks fine it.
edit: @rahul9999 you might put in your sig... that's a very easy way to advertise it w/o breaking xda rules or going off track!!! and when was your English ever bad!
Click to expand...
Click to collapse
Hehe thanks dude... will add this in my Sign sure
I Also want get my hands on what he flashed.. but we have to wait as stable build might take a time to develop... Soon LoS 15
Welcome to the MagiskFixes XDA thread!
This module applies a few patches to help Magisk work on GSIs, and maybe a few other devices (targeting Motorola oem at the moment, but more will be added as I get feedback). Obviously it's neither perfect nor universal yet.
Currently targets Motorola and Google devices running either phh or Erfan GSIs, but and Motorola devices running stock.
If you have a fix for a specific device, let me know here! I'll be happy to add it in
As usual, I'm not responsible for any bricking of devices, or things caused by that. No cats were harmed in the making of this module
Currently implemented fixes
- Added a few missing libs for GSIs
- Nuked a Motorola specific boot script (this may depend on how early the module mounts. May need reevaluated on execution)
- Add key layout for phh gsi on Google devices
V1. 2+ uses MMT-ex, and earlier versions used Unity
Thanks to @topjohnwu for Magisk and @Zackptg5 for the template
XDA:DevDB Information
MagiskFixes, Tool/Utility for all devices (see above for details)
Contributors
linuxandria
Source Code: https://github.com/Magisk-Modules-Repo/mgskfixes
Version Information
Status: Stable
Current Stable Version: 1.2.2
Stable Release Date: 2020-03-01
Created 2019-10-03
Last Updated 2020-03-17
Does it work with Moto x4 on PE?(Android 10)
Can you add fingerprint support for gsi on realme 3 pro (rmx1851)
What does should it fix on Motos?
I've two Moto Z2 Force with stock Pie on board and they seems to work fine with Magisk and EdXposed too...
What does should be addressed. on Motos by this module?!?
I'm interested and I can help with testing if needed...
Compatable with Metro PCS Moto e5 Play XT 1921-3 stock rom, rooted with Magisk?
If you're not going to respond to any questions or post about updates, etc then what's the actual point in this thread @linuxandria ?
Listy2021 said:
If you're not going to respond to any questions or post about updates, etc then what's the actual point in this thread @linuxandria ?
Click to expand...
Click to collapse
I've said it before in my other threafs I am significantly more active on telegram than XDA
Thejayyadav said:
Can you add fingerprint support for gsi on realme 3 pro (rmx1851)
Click to expand...
Click to collapse
Not unless I know what's needed
V1. 2.2 released!
Changelog:
- Rework fixes for generic and Motorola
- Add fixes for Google devices (only supports phh GSIs for now)
Wow greate idea
What exactly is fixed with this module the description is very vague if anyone could enlighten me it would greatly be appreciated
Sent from my Phh-Treble vanilla using Tapatalk
@linuxandria might you help out with sepolicy? kindly head over to my post
https://forum.xda-developers.com/t/edxposed-framework-not-recognizing-riru.4334587/post-86405127
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera (All of them)
Camcorder
Video Playback
Audio
Sensors
Flash
GPS
Sim slots
Flashlight
Mali drivers
MTP
2D and 3D gpu acceleration
HW encoding/decoding
HWcomposer (HWC)
Signal indicator
Wifi hotspot
Usb tethering
Known issues:
VoLTE and VoWiFi will not be implemented (for now) as they heavily depend on samsungs framework
NFC ( not implemented)
Instructions :
flash OneUI 2.0 Android 10 A105FDDU3BTF1 firmware preferrably.
Download the latest build.
Reboot to recovery
Flash the latest build.
Wipe data. however, you need to FORMAT data IF you are running encrypted stock ROM.
Optional: Flash GApps for Google Services and Magisk for root.
Reboot
NOTE :
This was built using sources from A105FDDU3BTF1 Q sources. .
This is not a GSI! if you are switching ROMS be sure to restore your stock vendor. will it boot a GSI? I dont know try at your own expense.
Bug report? :
To properly report a bug (Please dont report things already on the Not Working list)
a) Logcat ( preferrably logcat -b all whilst doing the activity).
b) /proc/last_kmsg (or /proc/kmsg)
Telegram group also available here
Telegram support: https://t.me/a10grp
Downloads :
Here.
Like my work and would like to offer me Coca cola?
PayPal: https://paypal.me/geckyn.
Sources :
Device Tree
Vendor Blobs
Kernel Source
Credits :
Infinite thanks to God
Thanks to @ataberkozen for helping me fix sensors and thermals and for other good ideas.
Thanks to @pardusx for testing.
Feedbacks appreciated. Dont forget to hit the THANKS button if you like my work:good:
XDA:DevDB Information
[ROM][CUSTOM]LineageOS 17.1 for Galaxy A10 Exynos [UNOFFICIAL], ROM for the Samsung Galaxy A10
Contributors
Geckyn, ataberkozen
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OneUI Pie, BTF1 preferrably( june 2020 build)
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2020-08-13
Beta Release Date: 2020-07-26
Created 2020-08-13
Last Updated 2020-09-21
Geckyn said:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera (All of them)
Camcorder
Video Playback
Audio
Sensors
Flash
GPS
Sim slots
Flashlight
Mali drivers
MTP
2D and 3D gpu acceleration
HW encoding/decoding
HWcomposer (HWC)
Signal indicator
Wifi hotspot
Usb tethering
Known issues:
VoLTE and VoWiFi will not be implemented (for now) as they heavily depend on samsungs framework
NFC ( not implemented)
Brightness slider doesnt work unfortunately
Instructions :
flash OneUI 2.0 Android 10 A105FDDU3BTF1 firmware preferrably.
Download the latest build.
Reboot to recovery
Flash the latest build.
Wipe data. however, you need to FORMAT data IF you are running encrypted stock ROM.
Optional: Flash GApps for Google Services and Magisk for root.
Reboot
NOTE :
This was built using sources from A105FDDU3BTF1 Q sources. .
This is not a GSI! if you are switching ROMS be sure to restore your stock vendor. will it boot a GSI? I dont know try at your own expense.
Bug report? :
To properly report a bug (Please dont report things already on the Not Working list)
a) Logcat ( preferrably logcat -b all whilst doing the activity).
b) /proc/last_kmsg (or /proc/kmsg)
Telegram group also available here
Telegram support: https://t.me/a10grp
Downloads :
Here.
Like my work and would like to offer me Coca cola?
PayPal: https://paypal.me/geckyn.
Sources :
Device Tree
Vendor Blobs
Kernel Source
Credits :
Infinite thanks to God
Thanks to @ataberkozen for helping me fix sensors and thermals and for other good ideas.
Thanks to @pardusx for testing.
Feedbacks appreciated. Dont forget to hit the THANKS button if you like my work:good:
XDA:DevDB Information
[ROM][CUSTOM]LineageOS 17.1 for Galaxy A10 Exynos [UNOFFICIAL], ROM for the Samsung Galaxy A10
Contributors
Geckyn, ataberkozen
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OneUI Pie, BTF1 preferrably( june 2020 build)
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-08-13
Beta Release Date: 2020-07-26
Created 2020-08-13
Last Updated 2020-08-13
Click to expand...
Click to collapse
Reserved
Geckyn said:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera (All of them)
Camcorder
Video Playback
Audio
Sensors
Flash
GPS
Sim slots
Flashlight
Mali drivers
MTP
2D and 3D gpu acceleration
HW encoding/decoding
HWcomposer (HWC)
Signal indicator
Wifi hotspot
Usb tethering
Known issues:
VoLTE and VoWiFi will not be implemented (for now) as they heavily depend on samsungs framework
NFC ( not implemented)
Instructions :
flash OneUI 2.0 Android 10 A105FDDU3BTF1 firmware preferrably.
Download the latest build.
Reboot to recovery
Flash the latest build.
Wipe data. however, you need to FORMAT data IF you are running encrypted stock ROM.
Optional: Flash GApps for Google Services and Magisk for root.
Reboot
NOTE :
This was built using sources from A105FDDU3BTF1 Q sources. .
This is not a GSI! if you are switching ROMS be sure to restore your stock vendor. will it boot a GSI? I dont know try at your own expense.
Bug report? :
To properly report a bug (Please dont report things already on the Not Working list)
a) Logcat ( preferrably logcat -b all whilst doing the activity).
b) /proc/last_kmsg (or /proc/kmsg)
Telegram group also available here
Telegram support: https://t.me/a10grp
Downloads :
Here.
Like my work and would like to offer me Coca cola?
PayPal: https://paypal.me/geckyn.
Sources :
Device Tree
Vendor Blobs
Kernel Source
Credits :
Infinite thanks to God
Thanks to @ataberkozen for helping me fix sensors and thermals and for other good ideas.
Thanks to @pardusx for testing.
Feedbacks appreciated. Dont forget to hit the THANKS button if you like my work:good:
XDA:DevDB Information
[ROM][CUSTOM]LineageOS 17.1 for Galaxy A10 Exynos [UNOFFICIAL], ROM for the Samsung Galaxy A10
Contributors
Geckyn, ataberkozen
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OneUI Pie, BTF1 preferrably( june 2020 build)
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-08-13
Beta Release Date: 2020-07-26
Created 2020-08-13
Last Updated 2020-08-13
Click to expand...
Click to collapse
Thread link updated....Brightness slider was fixed
Good work
Geckyn said:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera (All of them)
Camcorder
Video Playback
Audio
Sensors
Flash
GPS
Sim slots
Flashlight
Mali drivers
MTP
2D and 3D gpu acceleration
HW encoding/decoding
HWcomposer (HWC)
Signal indicator
Wifi hotspot
Usb tethering
Known issues:
VoLTE and VoWiFi will not be implemented (for now) as they heavily depend on samsungs framework
NFC ( not implemented)
Instructions :
flash OneUI 2.0 Android 10 A105FDDU3BTF1 firmware preferrably.
Download the latest build.
Reboot to recovery
Flash the latest build.
Wipe data. however, you need to FORMAT data IF you are running encrypted stock ROM.
Optional: Flash GApps for Google Services and Magisk for root.
Reboot
NOTE :
This was built using sources from A105FDDU3BTF1 Q sources. .
This is not a GSI! if you are switching ROMS be sure to restore your stock vendor. will it boot a GSI? I dont know try at your own expense.
Bug report? :
To properly report a bug (Please dont report things already on the Not Working list)
a) Logcat ( preferrably logcat -b all whilst doing the activity).
b) /proc/last_kmsg (or /proc/kmsg)
Telegram group also available here
Telegram support: https://t.me/a10grp
Downloads :
Here.
Like my work and would like to offer me Coca cola?
PayPal: https://paypal.me/geckyn.
Sources :
Device Tree
Vendor Blobs
Kernel Source
Credits :
Infinite thanks to God
Thanks to @ataberkozen for helping me fix sensors and thermals and for other good ideas.
Thanks to @pardusx for testing.
Feedbacks appreciated. Dont forget to hit the THANKS button if you like my work:good:
XDA:DevDB Information
[ROM][CUSTOM]LineageOS 17.1 for Galaxy A10 Exynos [UNOFFICIAL], ROM for the Samsung Galaxy A10
Contributors
Geckyn, ataberkozen
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OneUI Pie, BTF1 preferrably( june 2020 build)
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-08-13
Beta Release Date: 2020-07-26
Created 2020-08-13
Last Updated 2020-08-13
Click to expand...
Click to collapse
Confirmed booting on;
A105F firmware tested A105FDDU3BTF1
A105G firmware tested A105GDXS7BTE2
A105M firmware tested A105MUBU5BTCA
Unconfirmed:
A105N , A105FN
Great work bro.... So far working good, smooth, nice bb, any chance of have live display?... Flashed on a 105M
Great Work!! Works on A105FN but.... mtp is not working.
USB File Transfer will reboot phone, if you have a solution please help.
Boots perfectly, charging speeds are perfect.
Notch space does not work very well and takes up space in several full screen apps. Any way to fix it or is it part of the rom?
Geckyn said:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera (All of them)
Camcorder
Video Playback
Audio
Sensors
Flash
GPS
Sim slots
Flashlight
Mali drivers
MTP
2D and 3D gpu acceleration
HW encoding/decoding
HWcomposer (HWC)
Signal indicator
Wifi hotspot
Usb tethering
Known issues:
VoLTE and VoWiFi will not be implemented (for now) as they heavily depend on samsungs framework
NFC ( not implemented)
Instructions :
flash OneUI 2.0 Android 10 A105FDDU3BTF1 firmware preferrably.
Download the latest build.
Reboot to recovery
Flash the latest build.
Wipe data. however, you need to FORMAT data IF you are running encrypted stock ROM.
Optional: Flash GApps for Google Services and Magisk for root.
Reboot
NOTE :
This was built using sources from A105FDDU3BTF1 Q sources. .
This is not a GSI! if you are switching ROMS be sure to restore your stock vendor. will it boot a GSI? I dont know try at your own expense.
Bug report? :
To properly report a bug (Please dont report things already on the Not Working list)
a) Logcat ( preferrably logcat -b all whilst doing the activity).
b) /proc/last_kmsg (or /proc/kmsg)
Telegram group also available here
Telegram support: https://t.me/a10grp
Downloads :
Here.
Like my work and would like to offer me Coca cola?
PayPal: https://paypal.me/geckyn.
Sources :
Device Tree
Vendor Blobs
Kernel Source
Credits :
Infinite thanks to God
Thanks to @ataberkozen for helping me fix sensors and thermals and for other good ideas.
Thanks to @pardusx for testing.
Feedbacks appreciated. Dont forget to hit the THANKS button if you like my work:good:
XDA:DevDB Information
[ROM][CUSTOM]LineageOS 17.1 for Galaxy A10 Exynos [UNOFFICIAL], ROM for the Samsung Galaxy A10
Contributors
Geckyn, ataberkozen
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OneUI Pie, BTF1 preferrably( june 2020 build)
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-08-13
Beta Release Date: 2020-07-26
Created 2020-08-13
Last Updated 2020-08-13
Click to expand...
Click to collapse
SMA105F/DS shows animation screen then rebooots and softbricks itself
SMA105F/DS : Works
Android 10
EDIT : MY BAD IT WAS A MISTAKE A DID
UPDATE 30 AUGUST : Upon using it for a week I added more cons and pros
Upon using it for a week. Here are my Pros and Cons
Pros:
My read speeds increased from 40mb/s to 80mb/s
Phone became smoother
FastBoots
Easy to use
Uses haptic feedback at its fullest
CPU is cool no overheats
Since no overheats no battery probs
{NEW}
Charging is a little faster 4 hrs to 3 hrs
Every game I play on I getore FPS
Benchmarks on antutu increased from 90k to 110k
Benchmarks on 3DMark extreme from 5 fps to 9 fps and +200 points
Ui is hot
Lots of customizations: Fonts and more
Has an equalizer preinstalled
Has an audio visualizer in lock screen
No bloatware
Battery holds up to 12 Hrs
{ 3 hours - 66%
5 hours - 42%
8 hours - 26%
10 hours - 12%
12 hours - 1%
}
You should have an approximate or even better, My phone has half a year now.
Cons:
Lack of support for face recognition
Camera app preloaded is broken
Notch and Corners aren't normally aligned
Some Memory leaks and often crashes with GameGuardian(use ex kernel manager and enable zswap [check an yt vid])
The OS can corrupt at any moment randomly and redirect you to the bootloader
My Signal is weaker for some reason
{NEW}
Bluetooth signal is weaker
Speaker problems(to fix disable audio equalizer)
When using the preloaded camera app and flash it will crash after taking a picture
Some games will just crash while they are trying to load in
Developer options dont appear even after you enable them
The Preloaded browser is dog****, crashes and bad support with html5
And many more I'll find later on
Please thank me if you found anything usefull.
If you are willing to use it, you will have to take risks and accept the problems it has.
I came from the A20 forum to see this ROM but this thread seems dead, Is no one interested in custom ROMs here ? I though there'd be full comments and questions about this ROM.
I just wanted to know if it possible to make a ROM like this for the Galaxy A20 or maybe even port this one ?
@Geckyn
Great rom! Could you please fix navigation gestures and night light?
Jeremy_J7 said:
I came from the A20 forum to see this ROM but this thread seems dead, Is no one interested in custom ROMs here ? I though there'd be full comments and questions about this ROM.
I just wanted to know if it possible to make a ROM like this for the Galaxy A20 or maybe even port this one ?
@Geckyn
Click to expand...
Click to collapse
Its an unofficial port which many aren't so interested to risk on.
cmz6996 said:
Upon using it for a day. Here are my Pros and Cons
Pros:
My read speeds increased from 40mb/s to 80mb/s
Phone became smoother
FastBoots
Easy to use
Uses haptic feedback at its fullest
CPU is cool no overheats
Since no overheats no battery probs
Cons:
Lack of support for face recognition
Camera app preloaded is broken
Notch and Corners aren't normally aligned
Some Memory leaks and often crashes with GameGuardian
The OS can corrupt at any moment randomly and redirect you to the bootloader
My Signal is weaker for some reason
And more
If you are willing to use it, you will have to take risks and accept the problems it has.
Click to expand...
Click to collapse
I tried on a105m, camera app preloaded worked with no problem here, so far no reboots to bootloader... Memory leaks are so much worse in GSI Roms, at least thats what i felt using Havoc OS and Bliss Rom. For me is this or go back to Stock
Betrayal92 said:
I tried on a105m, camera app preloaded worked with no problem here, so far no reboots to bootloader... Memory leaks are so much worse in GSI Roms, at least thats what i felt using Havoc OS and Bliss Rom. For me is this or go back to Stock
Click to expand...
Click to collapse
Same. Just saying some problems I had with A105F/DS since 2GB isn't enough for GG and a game ig
working 100% on a105fn, but when i turn off my phone and plug in charger it will froze on charging screen and only power button + volume down helps, btw why are there no gestures ect like in normal android 10?
Hello. I installed version 20200813 on my A105M device, and apparently everything is working.
The exception is the recognition of my SD Card. I can't use it in the rom, although it works normally in TWRP.
Me SD is in exfat.
Betrayal92 said:
Great work bro.... So far working good, smooth, nice bb, any chance of have live display?... Flashed on a 105M
Click to expand...
Click to collapse
Will fix when I’m free
cmz6996 said:
Upon using it for a day. Here are my Pros and Cons
Pros:
My read speeds increased from 40mb/s to 80mb/s
Phone became smoother
FastBoots
Easy to use
Uses haptic feedback at its fullest
CPU is cool no overheats
Since no overheats no battery probs
Cons:
Lack of support for face recognition
Camera app preloaded is broken
Notch and Corners aren't normally aligned
Some Memory leaks and often crashes with GameGuardian
The OS can corrupt at any moment randomly and redirect you to the bootloader
My Signal is weaker for some reason
And more
If you are willing to use it, you will have to take risks and accept the problems it has.
Click to expand...
Click to collapse
Pros
Thanks
Cons
1. Not a default feature in los 17 and many others
2. ??
3. Okay will see about that
4. How do you know its a memory leak? and probably not necessarily a specific ROM issue
5. Nope Os doesn’t corrupt and reboot to bootloader unless you messed with it
6. Sadly most A series users report weak signal something that may be related to the device itself not just this ROM or a10
7. And many more lol
Jeremy_J7 said:
I came from the A20 forum to see this ROM but this thread seems dead, Is no one interested in custom ROMs here ? I though there'd be full comments and questions about this ROM.
I just wanted to know if it possible to make a ROM like this for the Galaxy A20 or maybe even port this one ?
@Geckyn
Click to expand...
Click to collapse
Thats the sad part of life...those really want something may not even get it whilst those who have may not exactly be interested. The response here is pretty discouraging but I understand that it may be a small community.
Is it possible ? Absolutely ...its all about time
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 12L (Sv2), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Githup repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's not working :
• You tell
Instructions :
• Download the latest build and gapps
• Reboot to recovery
• Make a full wipe (system, vendor, data, cache, dalvik)
• Flash the latest build and gapps
• Reboot
Download :
Rom : LineageOS-19.1-kuntao
Gapps : Nik-gapps-12L
Gapps addons↓
Nik-gapps-SetupWizard
Nik-gapps-AndroidAuto
Changelog :
Code:
22/08/2022
• initial release
XDA:DevDB Information
[ROM][12.1][UNOFFICIAL] LineageOS 19.1 for Lenovo P2
Contributors
Astridxx ,XiaoAk ,Sohit5s
Source Code: https://github.com/LineageOS
ROM OS Version: 12.x Sv2
ROM Firmware Required: Latest Stock
ROM Kernel: Linux 3.18.x
Based On: LineageOS
Version Information
Status: Stable
Created 2021-08-22
Last Updated 2021-08-22
Screenshots please?
Regards
Wait, how!? Didn't Lineage OS 19.1 require 4.9+ kernel for eBPF? Mad respect!
kimocyc said:
Screenshots please?
Regards
Click to expand...
Click to collapse
mahmutpekkara said:
Wait, how!? Didn't Lineage OS 19.1 require 4.9+ kernel for eBPF? Mad respect!
Click to expand...
Click to collapse
Required but BPF fix available for 3.18 kernel
Does ''gradually increase alarm volume'' works?
Soon Android 13 for the Lenovo P2?
Does anyone have any feedback or is everone pleased to stop upgrading by 18.1?
Ingin bertanya apa yang menyebabkan chrome error' di lineageos 18 ydk bisa di akses
How's the battery performance for this ROM, @Astridxx?
Any news in the LOS department @Astridxx?
eried1 said:
Any news in the LOS department @Astridxx?
Click to expand...
Click to collapse
And would @Astridxx be able to take the responsibility of official LOS maintenance?
hnsaba said:
And would @Astridxx be able to take the responsibility of official LOS maintenance?
Click to expand...
Click to collapse
Because our old kernel is not optimized for A12 and higher, I think all official support has ended and will not be resumed in any way. End of life basically, even though unofficial ROMs keep coming.
eried1 said:
Because our old kernel is not optimized for A12 and higher, I think all official support has ended and will not be resumed in any way. End of life basically, even though unofficial ROMs keep coming.
Click to expand...
Click to collapse
The 3.18 with a specific patch is compatible for A12 as Astrid has mentioned earlier.
The problem is the concentration of maintaining power, Mike has been so busy to continue maintaining the Kuntao. If Astrid is able to pick the responsibility, he will at least be able to make Kuntao updated with the LOS 18.1 as before, with the regular patches/security bumps and fixes.
hnsaba said:
The 3.18 with a specific patch is compatible for A12 as Astrid has mentioned earlier.
The problem is the concentration of maintaining power, Mike has been so busy to continue maintaining the Kuntao. If Astrid is able to pick the responsibility, he will be able to at least make Kuntao updated with LOS 18.1 as before, with the regular patches/security bumps and fixed.
Click to expand...
Click to collapse
Thanks for the FYI! I thought the LOS team dropped official support for a lot of devices because most could not make it past A11. Only some, like P2 and A5 2017, are able to bypass the system requirements.
Amazing if LOS 18.1 could be kept updated. It is after all the most stable ROM and should hence be prioritized. Crossing my fingers!
Astridxx said:
Required but BPF fix available for 3.18 kernel
Click to expand...
Click to collapse
Would you please let me know where I can find that fix? Is there a git repo/tree hosting it?
hnsaba said:
Would you please let me know where I can find that fix? Is there a git repo/tree hosting it?
Click to expand...
Click to collapse
Try reach out to @Astridxx through Telegram.
I'd be happy just for quarterly or - stretching it - even half-yearly updates.
Top! I use it as my main phone.
Daily driver.
Google pay working, everything seems fine and bugless.
No battery drain, seems better than in Los 18.
Absolute masterpiece
Pls make a port for Lenovo tab 3 8" plus. Same Snapdragon 625
@Astridxx Any plans on LOS20? Just an initial build like this one?