I have a problem with the ZE550KL 2GB / 16GB. I unlocked the Bootloader using the unofficial method, I installed TWRP but I was returned two errors when mounting: / persist and / factory
I solved the / persist persistence by doing the fastboot erase persist and flash on the partition.
But the error in / factory could not solve. I do not know if this has anything to do with it but no custom ROM boots it, it gets stuck in the boot animation. Do you have any solutions if so please help me.
I search for more solution did not solve problem, I cleaned 3 paste in etc / firmware but did not resolve bootloop. Does any more experienced Developer have a solution to this problem? Not only I but some Z00L users in the forum have problem. If they have a solution, help us. Thanks for listening.
Z00l 16Gb/2GB Snap410.
Related
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
shubhambhise said:
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
Click to expand...
Click to collapse
Hello,
I got help on the telegram group, we try many thing, the result is that I can only get ZUI working, if flashing COS via QFIL, I get the same result, if I flash ZUI, unlock bootloader, flash TWRP, wipe everything, then sideload CM13, TWRP say that no os is installed and I get a bootloop at the bootloader ...
ZUI is good, but I get some error regarding notification.
If you have any other idea ?
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Hope this will help you
Check this out
http://forum.xda-developers.com/zuk-z1/help/helpppp-t3505990
http://forum.xda-developers.com/zuk-z1/general/guide-how-to-unlock-root-install-twrp-t3394037
This will help you
I request someone please upload the full emmc dump or post it here. my device has been bootloader locked so cant flash the fastboot userdata.img its stopped working. i need a emmc dump rescue.
thanks in advance.
Update:1
i have dumped whole emmc on other device ze550kl it has bootloader unlocked and rooted with supersu. the point is when i try to write the full image using EMMC RAW Tool it gives an error write failed at the end of it. Phone doesn't boot and it goes to quallcomm bootloader 9006 or fastboot mode. if i try the rescue files which on the other thread (https://forum.xda-developers.com/zenfone-2-laser/development/unbrick-guide-z00l-ze550kl-t3600527 ) phone boots to fastboot mode but i cannot access the recovery or it wont boot to recovery. this is what i have done several times when it boots to 9006 mode i have deleted all 29 partitions in minipartition tool then created only one ext4 partition as a primary then it goes to 9008 mode. almost i tried all suggestions from addy692 nothing really worked as expected. if you have some ideas regarding this issue let me know in this thread.
Update:2
i have unbricked Z00LD from the dead and Please download the folllowing file ZE550KL_MP_RunChange_0721_Ver136_8916_V001.zip and extract it to somewhere else then write all partitions using EMMC RAW tool
if you are facing write error leave them, some partitions may fail to write i don't know why please choose write selected partitions and uncheck some of the partitions if you facing write error,you have to do it manually by checking one by one and write them as well. when its done connect your phone to fastboot mode if its not working try unbrick files https://forum.xda-developers.com/zenfone-2-laser/development/unbrick-guide-z00l-ze550kl-t3600527 then flash the Raw Firmware which you downloaded earlier that's it. if you face imei null afterwards Restore the QCN backup with QPST.
EMMC Firmware Filename:ZE550KL_MP_RunChange_0721_Ver136_8916_V001.zip
Link: https://mshare.io/file/yrABO9v
Raw Firmware Filename: WW_ZE550KL_21.40.1220.1943-rel-user-20161109095104-secured-releaseAFT.zip
Raw Firmware link: https://drive.google.com/uc?id=1AF-dGVJXOl-THcvOj36wt1OTTI33kedp&export=download
if you dont have qcn backup or file this guide helps you to recover your imei.
IMEI null fix: https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
Found an EMMC dump here https://forum.xda-developers.com/zenfone-2-laser/development/unbrick-guide-z00l-ze550kl-t3600527
R3DC0D3 said:
Found an EMMC dump here https://forum.xda-developers.com/zenfone-2-laser/development/unbrick-guide-z00l-ze550kl-t3600527
Click to expand...
Click to collapse
Cannot find ZE550KL (Z00LD) marshmallow emmc dump on that website.
karthikeyan346 said:
Cannot find ZE550KL (Z00LD) marshmallow emmc dump on that website.
Click to expand...
Click to collapse
EDIT: I just realized that there is only 600KL an not 550KL, that's a problem because I'm also looking for the 550KL, but maybe is compatible as the firmware is labeled Z00LD too. I'll update you if I find something.
Have you find any link ?
unfortunately nope. But my phone is back again working just doing some work from TWRP and leaving it bootlooping for an hour.
R3DC0D3 said:
unfortunately nope. But my phone is back again working just doing some work from TWRP and leaving it bootlooping for an hour.
Click to expand...
Click to collapse
how did you get your phone working again ? does it survive from bootloop.
karthikeyan346 said:
how did you get your phone working again ? does it survive from bootloop.
Click to expand...
Click to collapse
used TWRP to repair all partitions, flashed stock recovery, stock boot an stock rom, leaved it bootlooping for half an hour and he started.
Did you unlocked your bootloader before flashing twrp.
anyone figured out how to do repartition of ze550kl?
---------- Post added at 05:09 AM ---------- Previous post was at 05:05 AM ----------
R3DC0D3 said:
used TWRP to repair all partitions, flashed stock recovery, stock boot an stock rom, leaved it bootlooping for half an hour and he started.
Click to expand...
Click to collapse
How did you flashed twrp, because when i try to flash twrp, an "remote partition table not found" error occurs?
finally i have unbricked Z00LD the only one issue that i cannot unlock my device using asus official unlock app. it gives unknown error.
Thanks, this finally un-bricked my Z00LD!
christian.arvin said:
Thanks, this finally un-bricked my Z00LD!
Click to expand...
Click to collapse
Soft bricked or hard bricked? Somehow my device go into bootloop yesterday after that I have clean flashed but it is not booting now. Any help will be appreciated.
Sum1992 said:
Soft bricked or hard bricked? Somehow my device go into bootloop yesterday after that I have clean flashed but it is not booting now. Any help will be appreciated.
Click to expand...
Click to collapse
HardBrick, all partitions were wipe out. The downside is, i idid not make a backup of my NVRAM.
i flashed a custom rom that i didnt liked so tried to go back with fastboot but it caused me a bootloop failed to write cust and doesnt even tryes to write System.img just stops there how could i fix it? cant go to recovery twrp or Stock doesnt work can go to erecovery and fastboot boot loader is unlocked as frp as well pls help me!
Every information can be useful. It's very important to know on what ROM were you before, what happened and what you already tried.
Hi Guys ,
I accidentally wiped PERSIST PARTITION while i was just doing some normal flashing via REDWOLF TWRP . Now , i ended up with a bootloop on my device (mido) . I have tried the ADB commands for erasing and pushing new PERSIST.img which i extracted from fastboot rom , but it won't let me do it ( even with an unlocked BL , but i cant boot to System to enable USB DEB. or OEM UNLOCKING ) . After that i flashed full rom via MI FLASH TOOL , it shows successfully flashed but when it boots up , it goes into Bootloop . I have tried flashing every possible custom rom with every possible TWRP , it all just ends with one error that is cant mount Persist . So i even flashed rom via MI FLASH TOOL by putting the device into EDL MODE via TESTPOINT METHOD as well as via ADB COMMANDS ( when device is in fastboot ) , then flashed rom via MI FLASH TOOL , but it all ends with a freaking BOOTLOOP ! Unfortunately while using MI FLASH TOOL , by mistake i locked my Bootloader and now i cant unlock it .
Service Centres are not willing to help , they are saying to replace motherboard , but there's no issue with it .
Waiting for your quick help and guidance guys
Regards
XshreyX
Persist
I checked here and the persist issue got resolved , its for note 5 pro but you can try with your note 4 persist image.
http://en.miui.com/thread-3384431-1-1.html
Also
http://en.miui.com/thread-802834-1-1.html
Hope it can help you.
I flashed the original persist file , but now i cant log in to my MI ACCOUNT , any fix for that ?
Miui
Can you take a screeshot of the error you see when trying to log in? Any error code?
after installing custom my imei gone and nothing shown ,
root it , restore qcn file for imei repair but after restart stuck at boot logo & restart , clear all data and again flash stock firmware(12.5.1) from mifirm.net
boot from system but stuck in MIUI logo i change boot (Rave kernel )then boot successfully but i'm not able to to install custom rom
Please anyone help me please !
Which customer recovery and rom?
I solve that by erasing modem, fsg partition in orangeFox recovery terminal !
Bhai. ( you have created lots of problems) so One simple method... First you need to flash original rom which comes with phone ... I mean download firmware rom and flash with (mi flash tool) but one thing you've to flash some old firmware not latest.. Then after complet flashing your phone.. Open your phone and update latest version through mobile setting.. Now automatically fixed IMEI problem and already locked screen problem..
Then after.. Mind one thing if you are going to flash custom rom, you should to watch helpfull video from youtube..
"sir"
i know all problems but i try to know solution , and finally got it
if your modem ,nv data is corrupt you stock rom is also stuck on miui logo and restart in recovery ,if you try to install custom rom in situation ,custom rom not helping you at that time need to format /erase fsg ,modemst1,modemst2 and then reboot to system problem solved , or reflash that partition in fastboot (persist, modem=NON_HLOS.bin)
I lost my IMEI ,can anyone provide me it's device QCN backup so I can restore and able to use my device again normal
Please help me !