Huawei P10 Lite - Bricked Device - Huawei P10 Lite Questions & Answers

Hello everyone.
I Have Huawei P10 Lite WAS-LX1A and I accidentally bricked my device.
I was using TWRP to install a rom, and I wipped my system but the rom couldn't be installed for some reason. So I thought my TWRP Version had a problem, so I tried with bootloader to istall a new TWRP.
In adb I pressed:
fastboot flash recovery TWRP_by_GreatSlon.img
Click to expand...
Click to collapse
and then
fastboot flash recovery custom_boot_decryptdata_b130
Click to expand...
Click to collapse
But now, it doesn't load TWRP at all when I press vulume up + power button. I am stuck with out TWRP and with out an OS.
And I can't enter bootloader to install a new TWRP. Is there anything I can do?
I do have a laptop and an SD Card and my Bootloader is unlocked. Phone Unlocked and FRP Unlock are red, so maybe there is a way to save my phone please? I need help please . Sorry if I am not explaining very good and if I don't write correctly, I'ts because I am very very sad . Please someone tell me there is a way to fix it. Maybe dload? But I cannot find any file that it fits.. Thanks in advance.

I found this youtu.be/pkWSDlrLmns and I intalled a new TWRP. But I still cannot find any ROM to install. Any help please?

tobelios said:
I found this youtu.be/pkWSDlrLmns and I intalled a new TWRP. But I still cannot find any ROM to install. Any help please?
Click to expand...
Click to collapse
Try this.

tobelios said:
fastboot flash recovery TWRP_by_GreatSlon.img
and then
Quote:
fastboot flash recovery custom_boot_decryptdata_b130
Click to expand...
Click to collapse
you flashed twrp in recovery partition and after that, you flashed "custom_boot_decryptdata" also in recovery partition. so, twrp was overwritten. that's the reason why it doesn't work now. are you able to enter fastboot? (VOL- & power button)?
are you on emui5 or emui8?
if you can enter fastboot mode, flash twrp again.

Bricked P10 lite
My huawei p10 lite completely dead after mistakenly doing a wipeall from twrp. Now the screen doeant turn on , no logo, no vibrations, nothing. But the computer detects something(still no reaponse on phone) and when i typed fastboot devices in minimal adb it shows the list and the phone is listed in it. Please help.

Vrockpockey04 said:
My huawei p10 lite completely dead after mistakenly doing a wipeall from twrp. Now the screen doeant turn on , no logo, no vibrations, nothing. But the computer detects something(still no reaponse on phone) and when i typed fastboot devices in minimal adb it shows the list and the phone is listed in it. Please help.
Click to expand...
Click to collapse
Try to flash all partitions from a service rom.

I have the Same Problem. Only dark screen with fastboot connection.

(Sorry for the very late reply) I could enter fastboot using a pc, and then flashed a different twrp and costum rom.
Everything was okay. But, lately my rom started having network problems and I decided to flash an another rom..
But when I did, something wrong happened and now I am without twrp, without rom and with phone and frp locked.
My destiny is to brick my device and go to imposimple position, isn't it? I don't have my unlocked code so I cannot unlock my bootloader. I paid and tried dc unlocker to unlock my phone, but after plug-unplug it stopped being unlocked again and my money for dc unlocker gone for nothing and I am not willing to pay again for something like that. Any ideas to unlock my phone?
I sent an email and message to Huawei to see if they can give me the code, but idk if they will do. Any suggestions?

This post can be locked. This thread continues here. As for the Huawei, they respond that they don't give the unlock code anymore..

Related

P9 lite l21 tottaly bricked

So this is what happened, I was on I MedroM v3, so I was there was a firmware in beta (the 7.0 update) so I've done it and now I'm stuck in a bootloop
, I flashed the Nougat recovery so it locked my bootloader
and removed TWRP so I can't even go to flash the old rom
again. I also can't get the product id now cause I don't have an OS installed, there's no way to pull it without it an OS. I have tried every existing method possible and nothing (including the sd
card method with update.app and bla bla bla)
So I can't flash files through fastboot It says " Command not allowed"
Can somebody please help me, I have experience with flashing and everything but I in my entire life have not seen that a phone company so big doesn't have a ******** flashtool
or some other way of recovering hard bricked devices instead of buying a new motherboard or something..
If somebody could help me I would be so grateful! Please excuse my language I'm very mad and frustrated, I need my phone for work and now I'm offline..
- Fastboot is available but the bootloader is locked
- No TWRP
- No OS Installed
Download a firmware you want, extract the update.app and put it in sd card folder. From the phone completely shutdown, press vol +, vol - and power at the same time hold it until the updater with percentage progress moving appears.. you should be fine after that.. ? i believe. Maybe try it. That's what i did on my case
No, It says "Software Install failed! Incompatability with current software version"
When I go to eRecovery t says that it cant connect to WIFI.
As I said i tried every known method and I can't get it to work. Spent my whole day trying to fix it, I'm out of ideas
akseon said:
So this is what happened, I was on I MedroM v3, so I was there was a firmware in beta (the 7.0 update) so I've done it and now I'm stuck in a bootloop
, I flashed the Nougat recovery so it locked my bootloader
and removed TWRP so I can't even go to flash the old rom
again. I also can't get the product id now cause I don't have an OS installed, there's no way to pull it without it an OS. I have tried every existing method possible and nothing (including the sd
card method with update.app and bla bla bla)
So I can't flash files through fastboot It says " Command not allowed"
Can somebody please help me, I have experience with flashing and everything but I in my entire life have not seen that a phone company so big doesn't have a ******** flashtool
or some other way of recovering hard bricked devices instead of buying a new motherboard or something..
If somebody could help me I would be so grateful! Please excuse my language I'm very mad and frustrated, I need my phone for work and now I'm offline..
- Fastboot is available but the bootloader is locked
- I can't boot into TWRP
- No OS Installed
Click to expand...
Click to collapse
I had the same problem, but with the L31.
First try to use https://www.xda-developers.com/how-to-install-twrp/
Then with the file i send you attached (MAF32)
- Fastboot flash boot boot.img
- Fastboot flash system system.img
- Fastboot flash cust cust.img
- and finally TWRP
After that i puted the first exctrated uppdate.pp in my memory card and with the "3 buttons" process i flashed it. Then i repeated the same process with the second one (http://forum.xda-developers.com/hua...droid-nougat-dev-build-huawei-t3488360/page33). After this finished, again with the 3 buttons i made a factory reset.
5 minutes later, it was working.
i don't understand how to boot to fastboot ? and where to get these img files i am really stuck here pleaase
You don't understand, In order to unlock the bootloader i need the product ID which you get by typing some number combination in the dialer. I cant get to the dialer cause I dont have any OS installed, cause the old was dirty flashed. So thats why i cant flash TWRP etc..
hello, i'm using Huawei P9 Lite VNS-L21. i tried to flash the stock nougat Firmware Which i actually did and it worked flawless! but there was a little problem because there wasn't any Software update option in there, so after that i wanted to downgrade to stock MM. IDK what happened wrong while installing that, my phone got BRICKED. i don't have the Erecovery and twrp either. i cant flash firmware via DLOAD Method. the only thing i have is FASTBOOT mode..
i tried literally everything.. but nothing working..
I sent it to HUAWEI CUSTOMER CARE and they returned it back after a couple of days...
im really very worried because ive been using this phone for like 2 months ... and now im helplesss, If anybody is reading this please help/ assist me out of this.. i'd be really greatfull if anybody's going to help me out..
hash26 said:
hello, i'm using Huawei P9 Lite VNS-L21. i tried to flash the stock nougat Firmware Which i actually did and it worked flawless! but there was a little problem because there wasn't any Software update option in there, so after that i wanted to downgrade to stock MM. IDK what happened wrong while installing that, my phone got BRICKED. i don't have the Erecovery and twrp either. i cant flash firmware via DLOAD Method. the only thing i have is FASTBOOT mode..
i tried literally everything.. but nothing working..
I sent it to HUAWEI CUSTOMER CARE and they returned it back after a couple of days...
im really very worried because ive been using this phone for like 2 months ... and now im helplesss, If anybody is reading this please help/ assist me out of this.. i'd be really greatfull if anybody's going to help me out..
Click to expand...
Click to collapse
Why don't you flash TWRP in fastboot mode?
fasboot flash recovery recovery.img
PS: You need to start your own thread, really, rather than hijack someone else's
StrangerWeather said:
Why don't you flash TWRP in fastboot mode?
fasboot flash recovery recovery.img
PS: You need to start your own thread, really, rather than hijack someone else's
Click to expand...
Click to collapse
I'm new to this forum, if i did something that i shoud not I'm sorry about that and thanks for replying..
Ive tried many times to flash twrp recovery through fastboot it says installed but when i try to go to recovery there isnt any recovery...
i have a post with a same problem but with frp active, any sugestions?
hash26 said:
I'm new to this forum, if i did something that i shoud not I'm sorry about that and thanks for replying..
Ive tried many times to flash twrp recovery through fastboot it says installed but when i try to go to recovery there isnt any recovery...
Click to expand...
Click to collapse
What happens when you type : adb reboot recovery?
StrangerWeather said:
What happens when you type : adb reboot recovery?
Click to expand...
Click to collapse
Nothing happens it just reboots itself again n again but recovery doesn't open itself
hash26 said:
Nothing happens it just reboots itself again n again but recovery doesn't open itself
Click to expand...
Click to collapse
Ok, this is what I would do if I were you. I would pick a rom in the development section, eg. RR. Then I would extract it and get the system image and boot image and fastboot flash them. To extract the rom, use SuperR's Kitchen.
Hope this helps.
StrangerWeather said:
Ok, this is what I would do if I were you. I would pick a rom in the development section, eg. RR. Then I would extract it and get the system image and boot image and fastboot flash them. To extract the rom, use SuperR's Kitchen.
Hope this helps.
Click to expand...
Click to collapse
I'm about to do this! Thanks you
StrangerWeather said:
Ok, this is what I would do if I were you. I would pick a rom in the development section, eg. RR. Then I would extract it and get the system image and boot image and fastboot flash them. To extract the rom, use SuperR's Kitchen.
Hope this helps.
Click to expand...
Click to collapse
thank you so much for replying but there is something i want to ask you about..
the tool you told me about "SuperR's Kitchen" works on Linux.. and i'm a windows user is there any other software that runs on Windows and works as same as super'R ..
Waiting for your reply!!
hash26 said:
thank you so much for replying but there is something i want to ask you about..
the tool you told me about "SuperR's Kitchen" works on Linux.. and i'm a windows user is there any other software that runs on Windows and works as same as super'R ..
Waiting for your reply!!
Click to expand...
Click to collapse
Hi!
There is this but I haven't tested it: https://forum.xda-developers.com/android/help/extract-dat-marshmallow-lollipop-easily-t3334117
Let us know how it goes!

i flashed the wrong rom on my VNS-L21(now model no. is generic a-15)

hey
i flashed emui 5 on my VNS-L21
i did a mistake though
i flashed VNS-L31 firmware on my VNS-L21
now the phone model is changed to generic-a15
now i cant flash any roms using dload to this device..
i flashed twrp using fastboot but i cant boot into twrp....the bootloader unlocked screen says 'phone is booting" forever when i try to get into twrp
what do i do
please help
the rom is working fine on my VNS-L21 except for the camera...i need it a lot
please help me
edit:1
i tried to revert back to mm
it still says firmware incompatible
now my bootloader got locked...in the boot i got a msg that data partition is damaged and i need to format it....so i formatted it
now my phone is only booting to erecovery and bootloader
i cant flash twrp or revolution recovery because the bootloader is locked
i cant unlock bootloader now because i cant boot up my phone
Guys help us about the camera. I am in the same exact situation. @BadWolfYe and your product_V3 doesnt fix the camera for me, VNS-L21.
And for the recovery - http://forum.xda-developers.com/hua...ecovery-twrp-3-0-2-android-nougat-03-t3511937 - use adb flash it.
dancress said:
You'll have to go the hard route. You'll find all the required files in the ROM section.
Download any Nougat.zip (329 worked for me, 336 did not). Unzip. You'll get the update.app.
Download the second file with all the missing apps. Do not unzip. Maybe rename to something shorter like data.zip.
Download Revolution Recovery for Nougat. Unzip. You get the recovery.img. RENAME to something like revolution.img.
Open update.app in Huawei Update Extracor. Extract recovery.img, boot.img and system.img to wherever your fastboot.exe is. It's practical to put it all in one directory so you don't have to type long paths.
Now, careful...
Go into Fastboot. If Vol- + Power doesn't work, let it boot into eRecovery, press Vol- and tap Reboot. There you are.
Open a command window in the dir with fastboot.exe and the .img files (right click, Open Command Window)
fastboot flash boot boot.img
.... OK
fastboot flash system system.img
.... sparse 1/5 or something, this takes a bit of time.
fastboot flash revolution.img
.... OK
Now DO NOT REBOOT into System. Hold Vol+ + Power while still in Fastboot. It'll boot into Revolution eventually. Tap Advanced, ADB Sideload. Swipe.
Back in your command window, type:
adb sideload second_file.zip
... working... this'll take a bit. There might be an error message like 'could not mount /data'. Doesn't matter at this point.
When done, type
fastboot flash recovery recovery.img (this is the stock recovery you extracted from update.app)
... OK
Reboot to recovery from Revolution.
Do factory reset. Note: If you don't do this last step, there will be a bootloop.
Reboot. The system should now boot up normally. At least it did for me... good luck.
Click to expand...
Click to collapse
But maybe you installes twrp for mm
Laurisss said:
Guys help us about the camera. I am in the same exact situation. @BadWolfYe and your product_V3 doesnt fix the camera for me, VNS-L21.
And for the recovery - http://forum.xda-developers.com/hua...ecovery-twrp-3-0-2-android-nougat-03-t3511937 - use adb flash it.
Click to expand...
Click to collapse
I did this too. Only way to fix it is to downgrade to MM (instructions are in the N install thread). I then unlocked the bootloader, booted to fastboot, flashed Meticulus recovery. Once you're here, the important thing is to flash the update.zip and appropriate .Zip file for your device. Took me a while to find it but Meticulus has a post in Spanish with all of them for each type of P9 lite - there's one for the VNS-L23 there. Flash the update.zip and then device zip (in that order) and reboot. It'll work.
This phone is harder to flash Roms than others I've had in the past... It's important to do things in the right order.
Here's the link I was referring to: http://www.htcmania.com/showthread.php?t=1265029
ALAN JO K said:
hey
i flashed emui 5 on my VNS-L21
i did a mistake though
i flashed VNS-L31 firmware on my VNS-L21
now the phone model is changed to generic-a15
now i cant flash any roms using dload to this device..
i flashed twrp using fastboot but i cant boot into twrp....the bootloader unlocked screen says 'phone is booting" forever when i try to get into twrp
what do i do
please help
the rom is working fine on my VNS-L21 except for the camera...i need it a lot
please help me
Click to expand...
Click to collapse
Like me today.. I´ve installed Emui 5 on my VNS-L21, but after installation bootloader seems to be locked and TWRP won´t load.. What can I do now? I´ve tried flash some recovery, or MM but with locked bootloader it´s hard Is here somebody who know how to repair it ??
DiXiDeR said:
Like me today.. I´ve installed Emui 5 on my VNS-L21, but after installation bootloader seems to be locked and TWRP won´t load.. What can I do now? I´ve tried flash some recovery, or MM but with locked bootloader it´s hard Is here somebody who know how to repair it ??
Click to expand...
Click to collapse
First thing when you want to do something (TWRP, root, custom ROM etc.) with your phone is: UNLOCK BOOTLOADER!
Without unlocked bootloader is not hard to do, you not even try, because it is impossible...
gtdaniel said:
First thing when you want to do something (TWRP, root, custom ROM etc.) with your phone is: UNLOCK BOOTLOADER!
Without unlocked bootloader is not hard to do, you not even try, because it is impossible...
Click to expand...
Click to collapse
You didn't understand me.. I've unlocked it. Installed TWRP, EMUI 5 and after reboot unlocked bootloader gone.. How is this possible ?
DiXiDeR said:
You didn't understand me.. I've unlocked it. Installed TWRP, EMUI 5 and after reboot unlocked bootloader gone.. How is this possible ?
Click to expand...
Click to collapse
Simply! At any install of stock firmware you loose: unlocked bootloader, twrp and root.
gtdaniel said:
Simply! At any install of stock firmware you loose: unlocked bootloader, twrp and root.
Click to expand...
Click to collapse
Oh okey. So.. Maybe this will be retarded question, but how can I unlock bootloader now, when my phone model is generic_a15? When I'm trying to put it on Huawei website it is wrong..
DiXiDeR said:
Oh okey. So.. Maybe this will be retarded question, but how can I unlock bootloader now, when my phone model is generic_a15? When I'm trying to put it on Huawei website it is wrong..
Click to expand...
Click to collapse
With same procedure that you unlocked before.
You must have the unlock code.
gtdaniel said:
With same procedure that you unlocked before.
You must have the unlock code.
Click to expand...
Click to collapse
Okey, second retarded question.. I didn't save my first code.. is here some way to reach it again ? Or can I somehow use generic_a15 phone model?
If you do not have the initial unlock code you have a big problem...
gtdaniel said:
If you do not have the initial unlock code you are a big problem...
Click to expand...
Click to collapse
Oh god, I'm so retarded, but thank you for your patience
Now, when you dial code for Device ID you will get a differend ID and when you make procedure for another unlock code on Huawei site you get ERROR...
gtdaniel said:
Now, when you dial code for Device ID you will get a differend ID and when you make procedure for another unlock code on Huawei site you get ERROR...
Click to expand...
Click to collapse
Yes..
diorenzo said:
But maybe you installes twrp for mm
Click to expand...
Click to collapse
i tried to revert back to mm
it still says firmware incompatible
now my bootloader got locked...in the boot i got a msg that data partition is damaged and i need to format it....so i formatted it
now my phone is only booting to erecovery and bootloader
i cant flash twrp or revolution recovery because the bootloader is locked
i cant unlock bootloader now because i cant boot up my phone
ALAN JO K said:
i tried to revert back to mm
it still says firmware incompatible
now my bootloader got locked...in the boot i got a msg that data partition is damaged and i need to format it....so i formatted it
now my phone is only booting to erecovery and bootloader
i cant flash twrp or revolution recovery because the bootloader is locked
i cant unlock bootloader now because i cant boot up my phone
Click to expand...
Click to collapse
For unlock bootloader you only need you phone to boot into bootloader...
You say "now my phone is only booting to erecovery and bootloader"
So?
gtdaniel said:
For unlock bootloader you only need you phone to boot into bootloader...
You say "now my phone is only booting to erecovery and bootloader"
So?
Click to expand...
Click to collapse
how do i get the ids required for unlocking bootloader if i cant look it up in settings
ALAN JO K said:
how do i get the ids required for unlocking bootloader if i cant look it up in settings
Click to expand...
Click to collapse
You have to saved anywhere first time you have'it!
That is the first rule!
Once you debranded your phone that Device ID is change,
so even your phone boot ok and you obtain a Device ID is not the same
with the one saved in the Huawei databases...
So, procedure to obtain the bootloader unlock code is ended in error...

[SOLUTION] How to get out of the soft bricks and bootloops

If your device has unlocked boot loader and for some reason you just tried to flash something and it went wrong then there is no problem guys. The simplest solution if you are stuck on boot is that press vol down and power key for 3 minutes. It will work and will reboot. No before rebooting into the phone just go to the recovery by pressing the vol up key on boot process. This will load you in eRecovery of huawei. From there you can power off the phone. Now take out the sd card and put the desired rom in it. If you want stock android then you need to put UPDATE.APP in the dload folder in sd card and then go to eRecovery again. If you have a twrp recovery then you can go to stock as well and switch to a custom rom as well. Just place custom rom zip file and gapps zip file and flash it through twrp recovery.
For custom roms and recover visit :
Meticulus.co.vu
Thank you if I ever need it. Maybe someone that has needed to use this fix will confirm that it works.
gerrykiddy said:
Thank you if I ever need it. Maybe someone that has needed to use this fix will confirm that it works.
Click to expand...
Click to collapse
Well, it doesn't work for me... I held those buttons for 5 minutes, and all my phone did was to reboot about every15 seconds to the "Your device is booting now..."
I also tried with other button combos without any luck.
SnowmanDK said:
Well, it doesn't work for me... I held those buttons for 5 minutes, and all my phone did was to reboot about every15 seconds to the "Your device is booting now..."
I also tried with other button combos without any luck.
Click to expand...
Click to collapse
What happened to your device. Please tell me in detail ?
Arsaam said:
What happened to your device. Please tell me in detail ?
Click to expand...
Click to collapse
I made a post just before you did over here: https://forum.xda-developers.com/hu...i-p9-lite-stuck-bootloop-enter-t3600868/pages
After that post I managed to get into fastboot mode, when connected to my computer using usb, however my frp is locked and fastboot unlocked, so I am stuck there at the moment.
SnowmanDK said:
I made a post just before you did over here: https://forum.xda-developers.com/hu...i-p9-lite-stuck-bootloop-enter-t3600868/pages
After that post I managed to get into fastboot mode, when connected to my computer using usb, however my frp is locked and fastboot unlocked, so I am stuck there at the moment.
Click to expand...
Click to collapse
Download the SRK Tool for huawei p9 lite and unlock bootloader ( if required ). Then flash twrp recovery and then root the device. You might have made a mistake between any one of the processes. Also check if the OEM is unlocked in device developer options
Arsaam said:
Download the SRK Tool for huawei p9 lite and unlock bootloader ( if required ). Then flash twrp recovery and then root the device. You might have made a mistake between any one of the processes. Also check if the OEM is unlocked in device developer options
Click to expand...
Click to collapse
As written in the other thread, the phone boot loops, and I only have access to fastboot. It refuses to go into recovery and can not boot normally.
I can't flash TWRP as frp is locked.
I tried messing around with Miracle Loader 2.27A, but it can't find my phone (maybe I am doing something wrong).

needing help with huawei Y3 II LUA-L03 (softbricked/bootloop)

hi everyone.
a friend of mine was trying to root his huawei but now it cant boot anymore.
he followed a wrong guide for the Y5 II and flashed a custom recovery (bootloader unlocked) TWRP.
now the phone its on bootloop with the stock OS. i think that its due to the wrong recovery flashed on the partition.
so im requesting help for this phone.
is there a solution for this?
can anyone bring me the stock firmware for this model?
i need it as update.app to extract the stock recovery, not as ota update (dload/update.zip) cuz i need to flash it using fastboot. the phone just can use fastboot cuz recovery partition is corrupted and normal boot doesnt work (bootloop).
plz someone can help me?
i already googled long for a solution but i can figure out how to make it work.
the phone comes with android 5.1 lollipop and is from chile.
pd: the phone can only enter fastboot by pressing vol+ and power. if i try to turn it on normally it bootloops. when on fastboot menu, if i select recovery, it bootloops. if i select fastboot, it works using adb from pc (i mean, i can download data to it, it doesnt boot via fastboot option).
if i just had the original recovery.img maybe i can flash it and make it boot normally again.
rivenroth740 said:
hi everyone.
a friend of mine was trying to root his huawei but now it cant boot anymore.
he followed a wrong guide for the Y5 II and flashed a custom recovery (bootloader unlocked) TWRP.
now the phone its on bootloop with the stock OS. i think that its due to the wrong recovery flashed on the partition.
so im requesting help for this phone.
is there a solution for this?
can anyone bring me the stock firmware for this model?
i need it as update.app to extract the stock recovery, not as ota update (dload/update.zip) cuz i need to flash it using fastboot. the phone just can use fastboot cuz recovery partition is corrupted and normal boot doesnt work (bootloop).
plz someone can help me?
i already googled long for a solution but i can figure out how to make it work.
the phone comes with android 5.1 lollipop and is from chile.
pd: the phone can only enter fastboot by pressing vol+ and power. if i try to turn it on normally it bootloops. when on fastboot menu, if i select recovery, it bootloops. if i select fastboot, it works using adb from pc (i mean, i can download data to it, it doesnt boot via fastboot option).
if i just had the original recovery.img maybe i can flash it and make it boot normally again.
Click to expand...
Click to collapse
I don't know much about Huawei, but if firmware is available you should be able to flash back to stock. Personally, I would try to find the right TWRP and flash it...then it will boot and you can root of you still desire.
I'm not sure if this is the right one, but if bootloader is unlocked it won't hurt to try. https://twrp.me/devices/huaweiy300.html
Sent from my XT1609 using Tapatalk
RealWelder said:
I don't know much about Huawei, but if firmware is available you should be able to flash back to stock. Personally, I would try to find the right TWRP and flash it...then it will boot and you can root of you still desire.
I'm not sure if this is the right one, but if bootloader is unlocked it won't hurt to try. https://twrp.me/devices/huaweiy300.html
Click to expand...
Click to collapse
I'll try.. thanks
RealWelder said:
I don't know much about Huawei, but if firmware is available you should be able to flash back to stock. Personally, I would try to find the right TWRP and flash it...then it will boot and you can root of you still desire.
I'm not sure if this is the right one, but if bootloader is unlocked it won't hurt to try. https://twrp.me/devices/huaweiy300.html
Click to expand...
Click to collapse
Well.. it's no use.. he had to buy a new phone.

Flashed oeminfo. Phone not booting

Anderusk said:
There is an assumption that I have a slightly different display. TWRP by Grarak does not work correctly with stock drivers. On LOS driver through a certain time, too, dies. I have A JDI screen, the device works correctly with stock ROM. I hate EMUI, and like LOS, but cant use it.
I already thought to install LOS and never reboot the device. 7 times i had died screen drivers on LOS and AOSP, and always it was happen in the first minutes after reboot.
@Axan,https://cloud.mail.ru/public/78UN/jSQ7mjhWT
I have stock ROM L11C432B394 flashed by 3 buttons, but device was AL-10 changed to Can-L11 with HUC, Vendor - hw, Country - eu.
Click to expand...
Click to collapse
I've flashed this oeminfo to my Can-L01 phone, phone does not boot (stuck at red huawei logo on boot) 3 button recovery wont start just a boot loop on 3 button... VolUP+Power does not open recovery... VolDown+Power opens fastboot mode but immediately reboots (there's a strange thing on screen that it started to say Phone Locked FRP Unlocked instead of Phone Unlocked or Relocked) my phone is totaly bricked now...
giraygokirmak said:
I've flashed this oeminfo to my Can-L01 phone, phone does not boot (stuck at red huawei logo on boot) 3 button recovery wont start just a boot loop on 3 button... VolUP+Power does not open recovery... VolDown+Power opens fastboot mode but immediately reboots (there's a strange thing on screen that it started to say Phone Locked FRP Unlocked instead of Phone Unlocked or Relocked) my phone is totaly bricked now...
Click to expand...
Click to collapse
I have finally get into a stable Fastboot mode, but unfortunately my phones serial number has changed to the oeminfo shared by our friend so my unlock code does not work anymore. Since the phone can not boot i cannot set Manufacture mode so i cannot unlock using paid apps. I am at the hands of our friend who shared oeminfo twrp backup to share his Unlock code inorder to recover my phone back to my oeminfo backup file. Or my phone is total brick
giraygokirmak said:
my phone is totaly bricked now...
Click to expand...
Click to collapse
You need to know what you're doing. in my country, changing IMEI is a criminal offense.
It is possible to raise locked phone using the firmware with three buttons, in this case I think you need to try a can-l11, because oeminfo is from can-l11 model
giraygokirmak said:
I've flashed this oeminfo to my Can-L01 phone, phone does not boot (stuck at red huawei logo on boot) 3 button recovery wont start just a boot loop on 3 button... VolUP+Power does not open recovery... VolDown+Power opens fastboot mode but immediately reboots (there's a strange thing on screen that it started to say Phone Locked FRP Unlocked instead of Phone Unlocked or Relocked) my phone is totaly bricked now...
Click to expand...
Click to collapse
Anderusk said:
You need to know what you're doing. in my country, changing IMEI is a criminal offense.
It is possible to raise locked phone using the firmware with three buttons, in this case I think you need to try a can-l11, because oeminfo is from can-l11 model
Click to expand...
Click to collapse
In my country it is illegal too besides i lost my own serial and imei because of this i think because my serial was different before flashing this oeminfo image backup of yours. I was only expecting to change country and vendor info to flash european firmware not trying to change my imei. And also phone does not boot just shows red huawei logo and thats all no recovery no erecovery and no button combination works like 3 button reboot...
I previously wrote in the subject that changed the location of the device through Huawei Unlock Client. Why u decided change it by flashing oeminfo i dont know. For firmware through three buttons need stock recovery, not erecovery.
Once i tryed flash by three buttons with stock erecovery and twrp in recovery, it was failed. But i many times flash stock firmware with stock recovery and twrp in erecovery and locked bootloader.
Anderusk said:
I previously wrote in the subject that changed the location of the device through Huawei Unlock Client. Why u decided change it by flashing oeminfo i dont know. For firmware through three buttons need stock recovery, not erecovery.
Once i tryed flash by three buttons with stock erecovery and twrp in recovery, it was failed. But i many times flash stock firmware with stock recovery and twrp in erecovery and locked bootloader.
Click to expand...
Click to collapse
I didnt have credit and thus i couldnt use HCU Client, How did you managed to flash many times stock recovery and twrp while having locked bootloader? I read that this is impossible... When i try flashing stock firmware or recovery fastboot only says
FAILED (remote: Command not allowed)
finished. total time: 0.018s
With a locked bootloader, you can flash through three buttons. You cannot flash TWRP or other partitions.
Anderusk said:
With a locked bootloader, you can flash through three buttons. You cannot flash TWRP or other partitions.
Click to expand...
Click to collapse
You dont understand... 3 button does not work! It just reboots endlessly while pressing 3 buttons at the same time. I've been using 3 button eRecovery menu before, i know how to enter to it. But after flashing your TWRP Backup phone stuck at boot logo red huawei logo and these combinations do not work, i repeat do not work!
VolUp + Power On --> This should bring recovery menu but it doesnt.
VolUp+VolDown+Power On --> This should bring force flash application but it just reboots to huawei logo endlessly...
VolDown+USB Plug --> This should bring Fastboot but it just shows fastboot then reboots immediately.
VolDown+PowerOn + USB Plug --> This brings Fastboot but i cant flash anything because PHONE Locked status and unlock you've provided does not help.
In the end, i have a total brick. I will try to forcefully flash through DC-Phoenix software but i lost hope with the phone completely plus i'll have to pay 15euro just to try... It was perfect before your oeminfo twrp backup file. I just wanted to change vendor/country info thats all and didn't want to use HCU Client to change it
All CAN-L11 or L01 owners DO NOT, DO NOT use any other person's oeminfo partition backup in any way!!!!!!!
giraygokirmak said:
VolUp+VolDown+Power On --> This should bring force flash application but it just reboots to huawei logo endlessly...
Click to expand...
Click to collapse
3 buttons work, but u dont know how use it.
I say again, u can flash with VolUp+VolDown+Power On if u have stock recovery and locked/unlocked bootloader and locked/unlocked FRP. I know because i did it.
Do you know how to use Google search? Look for information on how to flash with three buttons. And go to relevant topic.
Anderusk said:
3 buttons work, but u dont know how use it.
I say again, u can flash with VolUp+VolDown+Power On if u have stock recovery and locked/unlocked bootloader and locked/unlocked FRP. I know because i did it.
Do you know how to use Google search? Look for information on how to flash with three buttons. And go to relevant topic.
Click to expand...
Click to collapse
Dude, in order to restore your oeminfo twrp backup one has to be on TWRP recovery not Stock recovery. So in TWRP recovery if you restore the file oeminfo twrp backup of yours and reboot phone gets into my situation. I know how to use 3 button force flash (its been written trillion places on web including this forum) i wrote here as a warning because you have shared your OEMINFO twrp backup on this thread not any other and i wanted to warn people not to get into a situation like mine.
I' am in a very bad situation here
giraygokirmak said:
Dude, in order to restore your oeminfo twrp backup one has to be on TWRP recovery not Stock recovery.
Click to expand...
Click to collapse
This is why I recommend stock recovery and TWRP in erecovery. Now you have one way - DC Phoenix
Anderusk said:
This is why I recommend stock recovery and TWRP in erecovery. Now you have one way - DC Phoenix
Click to expand...
Click to collapse
Please remove your oeminfo twrp backup before anybody else gets hurt. right now you have 2 dead bodies... @Axan just wrote that his phone become bricked just like the same way as mine. Yea i know we had the responsibility but there's something wrong with the file you provided...
giraygokirmak said:
Please remove your oeminfo twrp backup before anybody else gets hurt. right now you have 2 dead bodies... @Axan just wrote that his phone become bricked just like the same way as mine. Yea i know we had the responsibility but there's something wrong with the file you provided...
Click to expand...
Click to collapse
Victims reached 3 unfortunately, a guy with the nickname @lazy_prodigy also bricked his phone with the file you shared that oeminfo backup. His serial number became just like mine
Test attached oeminfo from eu version, you can replace file in twrp by path /dev/block/platform/soc/7824900.sdhci/by-name, it's not twrp flash archive.
Thanks, is this OEMINFO C432 dual sim or single sim?
Great that finally someone shared it!
trol_sg said:
Thanks, is this OEMINFO C432 dual sim or single sim?
Great that finally someone shared it!
Click to expand...
Click to collapse
Dual SIM can-l11
Temanyan said:
Test attached oeminfo from eu version, you can replace file in twrp by path /dev/block/platform/soc/7824900.sdhci/by-name, it's not twrp flash archive.
Click to expand...
Click to collapse
Thanks For Sharing Sir
Sir Need Help To Read oeminfo Partition
Adb Commands Or Any Tool ?
I Have Rooted CAN-L12
Want To Read/Backup oeminfo
But Not From TWRP
Will Be Grateful To You
Thanks Anticipation

Categories

Resources