Related
my moto x play is stuck in boot loop m not able to downgrade it on 5.1 and cant upgrade to 6.0(because there is no 6.0 stock file on air still)
my question is is there any way to enable usb debugging and allow oem unlock via fast boot cmds.?
because if there is a way to unlock boot lodear to i can install twrp recovery.
please help me
http://lmgtfy.com/?q=fastboot+allow+usb+debugging
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
Nico3d3 said:
http://lmgtfy.com/?q=fastboot+allow+usb+debugging
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
Click to expand...
Click to collapse
unfortunately not working for me.
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
If the instructions are too technical for you and you can't figure out how to make it happen, following the tutorial, then I'm afraid I'll have a hard-time helping you unless I have the phone in my hand. Unfortunately, hacking phone is a process where we learn from our mistakes. I had a few times where I almost bricked my then new to me Samsung Galaxy SIII, but then I searched the Internet trying and trying again until I understood how do to thing to get it back to work.
Maybe, try to flash TWRP temporarily, you should at least give it a shot:
fastboot boot TWRP-lux-2.8.7-r4.img
Click to expand...
Click to collapse
I'm pretty sure it will work even if your bootloader is locked because it just install it temporarily. You execute the flashboot command, then you navigate the option on the phone until you see the option "Reboot recovery". It will reboot in TWRP recovery, then you could use the interface to install this recovery backup of Marshmallow. Instructions on how to install the recovery backup in TWRP, are here.
Nico3d3 said:
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
If the instructions are too technical for you and you can't figure out how to make it happen, following the tutorial, then I'm afraid I'll have a hard-time helping you unless I have the phone in my hand. Unfortunately, hacking phone is a process where we learn from our mistakes. I had a few times where I almost bricked my then new to me Samsung Galaxy SIII, but then I searched the Internet trying and trying again until I understood how do to thing to get it back to work.
Maybe, try to flash TWRP temporarily, you should at least give it a shot:
I'm pretty sure it will work even if your bootloader is locked because it just install it temporarily. You execute the flashboot command, then you navigate the option on the phone until you see the option "Reboot recovery". It will reboot in TWRP recovery, then you could use the interface to install this recovery backup of Marshmallow. Instructions on how to install the recovery backup in TWRP, are here.
Click to expand...
Click to collapse
brother another think is that when m on recovery mode and click on apply update from sdcard its shows (Internal and external memory cannot be mounted)
i think my sdcard storege is corrupted m not able to right any thing. and i had already tried that twrp recovey Method witch is not work for me may be tha resasion is corrupte memory.
here is the result
I really want to know why people flash soak tests without unlocking the bootloader? Do they really know what they are doing?
treibstoff said:
I really want to know why people flash soak tests without unlocking the bootloader? Do they really know what they are doing?
Click to expand...
Click to collapse
m also asking same qustion to me
ok do you have any idea when the stock firmware will be on air..?
anujanuj said:
m also asking same qustion to me
ok do you have any idea when the stock firmware will be on air..?
Click to expand...
Click to collapse
No unfortunetly not... You have to wait ...
anujanuj said:
m also asking same qustion to me
ok do you have any idea when the stock firmware will be on air..?
Click to expand...
Click to collapse
Try these commands only
fastboot erase cache
fastboot erase userdata
fastboot reboot
effingbadluck said:
Try these commands only
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
already did via manual via recovery mode
any way to format my phone memory not clear data i mean format full drive may be then i can flash 5.1 again
anujanuj said:
already did via manual via recovery mode
any way to format my phone memory not clear data i mean format full drive may be then i can flash 5.1 again
Click to expand...
Click to collapse
Do it this time using fastboot commands.It's worth a try
anujanuj said:
already did via manual via recovery mode
any way to format my phone memory not clear data i mean format full drive may be then i can flash 5.1 again
Click to expand...
Click to collapse
Hi anuj if you are using indian moto x play then try to flash this one. It will help you
http://www.filefactory.com/file/6jg...23.118-32_cid7_subsidy-DEFAULT_CFC_v2.xml.zip
umair deshmukh said:
Hi anuj if you are using indian moto x play then try to flash this one. It will help you
http://www.filefactory.com/file/6jg...23.118-32_cid7_subsidy-DEFAULT_CFC_v2.xml.zip
Click to expand...
Click to collapse
der umair can i have the alternative link of this because file fectory didnt provide resume links
and
still i had tried these roms
1. X_Play_Retail_India_XT1562_LPD23.118-10_CFC.xml
2.XT1562_LUX_RETASIA_DS_5.1.1_LPD23.118-12_cid7_subsidy-DEFAULT_CFC.xml.zip
3.XT1563_LUX_RETLA_DS_5.1.1_LPD23.118-6.1_cid12_subsidy-DEFAULT_CFC.xml
4.Blur_Version.24.11.18.lux_retasia_ds.retasiaall.en.03 (this is ota)
umair deshmukh said:
Hi anuj if you are using indian moto x play then try to flash this one. It will help you
http://www.filefactory.com/file/6jg...23.118-32_cid7_subsidy-DEFAULT_CFC_v2.xml.zip
Click to expand...
Click to collapse
i think this is the alternative
https://mega.nz/#!3dAR3AZZ!UvQco3Bf_BqSEeMfwEMjZUm8quYV31lu5gYoj4PKs3E
anujanuj said:
der umair can i have the alternative link of this because file fectory didnt provide resume links
and
still i had tried these roms
1. X_Play_Retail_India_XT1562_LPD23.118-10_CFC.xml
2.XT1562_LUX_RETASIA_DS_5.1.1_LPD23.118-12_cid7_subsidy-DEFAULT_CFC.xml.zip
3.XT1563_LUX_RETLA_DS_5.1.1_LPD23.118-6.1_cid12_subsidy-DEFAULT_CFC.xml
4.Blur_Version.24.11.18.lux_retasia_ds.retasiaall.en.03 (this is ota)
Click to expand...
Click to collapse
Dude try this one http://www.filefactory.com/file/4ar...LPD23.118-22_cid7_subsidy-DEFAULT_CFC.xml.zip mine problem was solved i hop it will solve your problem also
And sorry i don't have an alternative link..
umair deshmukh said:
Dude try this one http://www.filefactory.com/file/4ar...LPD23.118-22_cid7_subsidy-DEFAULT_CFC.xml.zip mine problem was solved i hop it will solve your problem also
And sorry i don't have an alternative link..
Click to expand...
Click to collapse
tried these roms nothing happened
Nico3d3 said:
http://lmgtfy.com/?q=fastboot+allow+usb+debugging
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
Click to expand...
Click to collapse
can you give me the link or tell me how to allow oem unlock via fastboot....?
treibstoff said:
I really want to know why people flash soak tests without unlocking the bootloader? Do they really know what they are doing?
Click to expand...
Click to collapse
Nico3d3 said:
http://lmgtfy.com/?q=fastboot+allow+usb+debugging
http://android.stackexchange.com/qu...ndroid-if-forgotten-pattern-for-screen-unlock
Click to expand...
Click to collapse
hello frnds here is the updated 6.0 file uploaded if i will flash this file so my phone can be start..?
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1
this is stock 6.0 firmware file
anujanuj said:
hello frnds here is the updated 6.0 file uploaded if i will flash this file so my phone can be start..?
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1
this is stock 6.0 firmware file
Click to expand...
Click to collapse
your problem solved or not?
TWRP 3.0.1 is available. See: https://dl.twrp.me/pollux_windy/
Is it suitable for pollux, too?
duy_ng said:
Is it suitable for pollux, too?
Click to expand...
Click to collapse
Read this.
ze7zez said:
Read this.
Click to expand...
Click to collapse
How can I install the recovery with locked bootloader?
Marv42 said:
How can I install the recovery with locked bootloader?
Click to expand...
Click to collapse
For locked BL you need this.
Rootk1t said:
For locked BL you need this.
Click to expand...
Click to collapse
Thanks, that is what I'm using, I thought I can update TWRP now. So I have too wait or unlock my bootloader.
Have a nice day
Is there a tutorial for installing just TWRP with and unlocked boot loader? To fota?
jhcomputerguy said:
Is there a tutorial for installing just TWRP with and unlocked boot loader? To fota?
Click to expand...
Click to collapse
Via adb.exe
Code:
adb push twrp.img /sdcard/
adb shell
su
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Or use Rashr app.
Good afternoon, I hope you can help me to install the twrp 3, I have the Tablet Z 311, already with bootloader unlocked and actulently with the dualRecovery, but I want to update to be able to put the RR. Already try with all the Apps of the store and with ADB, but it simply is not updated. PLS help me
kradzt said:
Good afternoon, I hope you can help me to install the twrp 3, I have the Tablet Z 311, already with bootloader unlocked and actulently with the dualRecovery, but I want to update to be able to put the RR. Already try with all the Apps of the store and with ADB, but it simply is not updated. PLS help me
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=72470887&postcount=292
Rootk1t said:
https://forum.xda-developers.com/showpost.php?p=72470887&postcount=292
Click to expand...
Click to collapse
Not this post, but this one.
how are you everybody please can any one help me
i flashed android nougat on my phone via unofficial method via firmware finder app
and after i flashed it i found some apps dosnot exist and i found the build number is "nrd90m test-keys"
now i want to rollback to marshmallow
i unlocked bootloader but i cant install twrp
can anyone help me please
What exactly have you tried already?
Have you tried "fastboot flash recovery ***.img" ?
Of course, only the Nougat recovery will work.
Schlengge said:
What exactly have you tried already?
Have you tried "fastboot flash recovery ***.img" ?
Of course, only the Nougat recovery will work.
Click to expand...
Click to collapse
yes i tried this method with a nougat recovery but it says remote:command not allowed
i have bootloader unlocked but frb still locked
that shoud i do please
anamedo7mdy said:
yes i tried this method with a nougat recovery but it says remote:command not allowed
i have bootloader unlocked but frb still locked
that shoud i do please
Click to expand...
Click to collapse
Hmm command not allowed usually says that bootloader is locked. You did unlock it manually again right? Because it often is locked even though it says unlocked on the bootloader.
Schlengge said:
Hmm command not allowed usually says that bootloader is locked. You did unlock it manually again right? Because it often is locked even though it says unlocked on the bootloader.
Click to expand...
Click to collapse
no iam sure it is unlocked cause it shows me a message when opening the phone say that the phone is unlocked
but the frp is still locked is that the problem ???
should i unlock frp firsr or what shoud i do ??
anamedo7mdy said:
no iam sure it is unlocked cause it shows me a message when opening the phone say that the phone is unlocked
but the frp is still locked is that the problem ???
should i unlock frp firsr or what shoud i do ??
Click to expand...
Click to collapse
Nah that should not be an issue.
I don't know... Have you started fastboot with admin rights if on Windows?
Schlengge said:
Nah that should not be an issue.
I don't know... Have you started fastboot with admin rights if on Windows?
Click to expand...
Click to collapse
no i didnot
no one can help me ????????
it is uppset
Try to flash recovery with an app like Flashfy or FlashFire.
Potato997 said:
Try to flash recovery with an app like Flashfy or FlashFire.
Click to expand...
Click to collapse
is that dangerous or need root ???
anamedo7mdy said:
is that dangerous or need root ???
Click to expand...
Click to collapse
Yes root is needed.
Potato997 said:
Yes root is needed.
Click to expand...
Click to collapse
can i install root via kingroot
anamedo7mdy said:
can i install root via kingroot
Click to expand...
Click to collapse
I don't think it will work.. there is already a root method for nougat.
Potato997 said:
I don't think it will work.. there is already a root method for nougat.
Click to expand...
Click to collapse
can you tell me how can i root it
This is a hassel free, time and effort saving tutorial for INSTALLING TWRP and ROOTING your RN4 with SUPERSU method.
A Detailed video guide tutorial is down in messages
OR
Follow these steps:-
1.Download the given TOOLKIT ZIP and extract it on your PC.
2.Connect your UNLOCKED redmi note 4 to PC and make sure usb debugging is enabled in developer options.
3.Now run the tool and enter password - rootmyredminote4
4.Now click any key on the toolkit to start the flashing process, the tool will automatically flash TWRP RECOVERY and boot into TWRP mode. (Wait until it boots completely and do not press any key on the toolkit menu..)
5.Now when your twrp homescreen appears, press any key on toolkit in order to copy SUPERSU and NO VARETY zip(s) to your phone's internal storage.
6.Just install the two zip files from twrp and your phone will be successfully ROOTED.
NOTE : I was on the latest stable rom (MIUI v8.2.4.0) while making this video, and I've also tested this method on developer rom v 7.4.20, so I recommend you to be on the latest stable one whichever is present at your time of rooting.
Do COMMENT below if you are facing any PROBLEM.
I will try to reply as fast as possible.
Download Link is also down in messages
GUYZ HIT THANKS if you like my work
LINKS:-
DOWNLOAD HERE:-
Click to expand...
Click to collapse
Watch full detailed tutorial here - Root Redmi Note 4 Easiest | 1click method | HINDI
DOWNLOAD TOOLKIT HERE - RN4 Rootkit NK7
It is for Snapdragon or mediatek?
saikiran001 said:
It is for Snapdragon or mediatek?
Click to expand...
Click to collapse
snapdragon.. watch the video in the OP
saikiran001 said:
It is for Snapdragon or mediatek?
Click to expand...
Click to collapse
Yeah it is for snapdragon bro..
good work
aman1241 said:
good work
Click to expand...
Click to collapse
Thank You..
Does this work with Mido?
Does this work with Mido?
Quintain said:
Does this work with Mido?
Click to expand...
Click to collapse
Yes it works with Snapdragon/Mido..
Sorry newbie here , another question. It skips twrp flashing and goes straight to wait till the phone reboots to twrp. Is there something wrong?
Quintain said:
Sorry newbie here , another question. It skips twrp flashing and goes straight to wait till the phone reboots to twrp. Is there something wrong?
Click to expand...
Click to collapse
Have you turned on USB DEBUGGING??
nik.desai07 said:
Have you turned on USB DEBUGGING??
Click to expand...
Click to collapse
Yeah, I did. It already worked, the problem apparently, had something to do with the drivers installed in my computer
Thanks!
mobiledit free software can read only root files. except some folders like root/var/ data without root. extracted build.prop from it without root
Will it work on 8.2.5.0?
rejtő said:
Will it work on 8.2.5.0?
Click to expand...
Click to collapse
Yes bro it will work..
Does this need lazyflasher flashing . Coz am using latest nougat beta
Sent from my Redmi Note 4 using Tapatalk
dastan4eva said:
Does this need lazyflasher flashing . Coz am using latest nougat beta
Click to expand...
Click to collapse
No it doesn't.. Just enable usb debugging.. Authorized your PC and use the tool..
nik.desai07 said:
No it doesn't.. Just enable usb debugging.. Authorized your PC and use the tool..
Click to expand...
Click to collapse
Thanks man . Twrp installed fine and roots working. Just to clarify now if I need to flash an miui Rom using this recovery do I need to flash lazyflasher zip ?
Sent from my Redmi Note 4 using Tapatalk
dastan4eva said:
Thanks man . Twrp installed fine and roots working. Just to clarify now if I need to flash an miui Rom using this recovery do I need to flash lazyflasher zip ?
Click to expand...
Click to collapse
Yes bro.. In order to boot into MIUI lazyflasher is needed to cancel the VARETY check.. or else it will get stuck on MI logo..
not working
i am stuck at fastboot screen
and driver or anything else that is needed to be instaled on my pc [using xp] ?
Is there anyway to flash twrp on 5.3.7.0?or atleast root it? I tried to use Kingoroot(both pc version and non pc version)and it fails.. I'm using Amazon Fire HD 8 7th Generation (2017)
Roowz said:
Is there anyway to flash twrp on 5.3.7.0?or atleast root it? I tried to use Kingoroot(both pc version and non pc version)and it fails.. I'm using Amazon Fire HD 8 7th Generation (2017)
Click to expand...
Click to collapse
To unlock/root your Fire tablet using exploit package.
This link from @k4y0z: https://forum.xda-developers.com/hd8-hd10/orig-development/unlock-fire-hd-8-2017-douglas-t3962846
Follow the steps carefully (do not miss the steps).
Thanks for the quick reply.. But I heard that Amazon patched it on 5.3.7.0.. Is it true? I want to flash lineage os on it
EDIT: I just flashed twrp and lineage os 12.. It's very smooth and to those people who's asking if it's possible to flash twrp/root on 5.3.7.0.. Yes it can.. Feel free to ask me any questions..
Photos of my Amazon running twrp: https://m.imgur.com/a/hVFC62a
Is that possible to root fire hd 10 7th version 5.3.7.0?
I am getting in trouble with rooting fire hd 7th and flash lineage rom.
How did you make it?
I tried to do same way to flash lineage, ref (https://forum.xda-developers.com/hd...ck-fire-hd-10-2017-suez-t3913639/post79169422)
and I tried to mtk-su but it doesn't work as I expect.
mtk-su post link. https://forum.xda-developers.com/hd...xperimental-software-root-hd-8-hd-10-t3904595
Can you make me clear how to root and flash lineage rom?
Roowz said:
Thanks for the quick reply.. But I heard that Amazon patched it on 5.3.7.0.. Is it true? I want to flash lineage os on it
EDIT: I just flashed twrp and lineage os 12.. It's very smooth and to those people who's asking if it's possible to flash twrp/root on 5.3.7.0.. Yes it can.. Feel free to ask me any questions..
Photos of my Amazon running twrp: https://m.imgur.com/a/hVFC62a
Click to expand...
Click to collapse
tichangel said:
I am getting in trouble with rooting fire hd 7th and flash lineage rom.
How did you make it?
I tried to do same way to flash lineage, ref (https://forum.xda-developers.com/hd...ck-fire-hd-10-2017-suez-t3913639/post79169422)
and I tried to mtk-su but it doesn't work as I expect.
mtk-su post link. https://forum.xda-developers.com/hd...xperimental-software-root-hd-8-hd-10-t3904595
Can you make me clear how to root and flash lineage rom?
Click to expand...
Click to collapse
skip mtksu and do the other steps..
Steps?
Roowz said:
Thanks for the quick reply.. But I heard that Amazon patched it on 5.3.7.0.. Is it true? I want to flash lineage os on it
EDIT: I just flashed twrp and lineage os 12.. It's very smooth and to those people who's asking if it's possible to flash twrp/root on 5.3.7.0.. Yes it can.. Feel free to ask me any questions. QUOTE]
Photos of my Amazon running twrp: (Imgur url)
Click to expand...
Click to collapse
What were the steps you used?
Nothing to solve now.
Slipdash said:
What were the steps you used?
Click to expand...
Click to collapse
I solved the problem.
I got error with step-1.sh
Becuase of root permission.
But I got root permission with kingoroot.
Now everything is ok, and I finished to flash lineage rom 12.1
That works well.
Thanks for your reply
tichangel said:
I solved the problem.
I got error with step-1.sh
Becuase of root permission.
But I got root permission with kingoroot.
Now everything is ok, and I finished to flash lineage rom 12.1
That works well.
Thanks for your reply
Click to expand...
Click to collapse
ur welcome even tho i didn't rlly help xD
sorry
hi,
follow this ?
https://forum.xda-developers.com/hd8-hd10/orig-development/unlock-fire-hd-8-2017-douglas-t3962846
is right?
do i have need root?
Thank you
Help
Roowz said:
Thanks for the quick reply.. But I heard that Amazon patched it on 5.3.7.0.. Is it true? I want to flash lineage os on it
EDIT: I just flashed twrp and lineage os 12.. It's very smooth and to those people who's asking if it's possible to flash twrp/root on 5.3.7.0.. Yes it can.. Feel free to ask me any questions..
Hey I'm new to this type of stuff and not familiar with anything in this field if you could do anything to help me get started with this I would really appreciate it. Thanks
Click to expand...
Click to collapse
XeRaspy said:
Thanks for the quick reply.. But I heard that Amazon patched it on 5.3.7.0.. Is it true? I want to flash lineage os on it
EDIT: I just flashed twrp and lineage os 12.. It's very smooth and to those people who's asking if it's possible to flash twrp/root on 5.3.7.0.. Yes it can.. Feel free to ask me any questions..
Hey I'm new to this type of stuff and not familiar with anything in this field if you could do anything to help me get started with this I would really appreciate it. Thanks
Click to expand...
Click to collapse
Here : https://forum.xda-developers.com/hd8-hd10/orig-development/unlock-fire-hd-8-2017-douglas-t3962846/page44
Roowz said:
skip mtksu and do the other steps..
Click to expand...
Click to collapse
Hi, How did you get it to work in step-1.sh without using mtk-su. If I dont include the file in the bin folder it will keep looking for it. However if I include it it says platform not supported. I tried Kingoroot but I couldn't figure out how to get it to work in Linux. My fire os version is the same as yours 5.3.7.0. Any help is appreciated. Thanks!!
jbizub5192 said:
Hi, How did you get it to work in step-1.sh without using mtk-su. If I dont include the file in the bin folder it will keep looking for it. However if I include it it says platform not supported. I tried Kingoroot but I couldn't figure out how to get it to work in Linux. My fire os version is the same as yours 5.3.7.0. Any help is appreciated. Thanks!!
Click to expand...
Click to collapse
Follow @dink-x10 tutorial on this page https://forum.xda-developers.com/hd8-hd10/orig-development/unlock-fire-hd-8-2017-douglas-t3962846/page44
Roowz said:
Follow @dink-x10 tutorial on this page https://forum.xda-developers.com/hd8-hd10/orig-development/unlock-fire-hd-8-2017-douglas-t3962846/page44
Click to expand...
Click to collapse
I followed the post and I am getting stuck on this step: "Allow ADB debugging on the device and check this is found by doing ADB devices in the terminal"
When I run ADB devices from terminal within the brick-douglas / amonet folder i get command not found. I noticed on some of the posts it states to use the attached file from the first post. That is the file i am using. Any thoughts would greatly be appreciated! Thanks
jbizub5192 said:
Hi, How did you get it to work in step-1.sh without using mtk-su. If I dont include the file in the bin folder it will keep looking for it. However if I include it it says platform not supported. I tried Kingoroot but I couldn't figure out how to get it to work in Linux. My fire os version is the same as yours 5.3.7.0. Any help is appreciated. Thanks!!
Click to expand...
Click to collapse
jbizub5192 said:
I followed the post and I am getting stuck on this step: "Allow ADB debugging on the device and check this is found by doing ADB devices in the terminal"
When I run ADB devices from terminal within the brick-douglas / amonet folder i get command not found. I noticed on some of the posts it states to use the attached file from the first post. That is the file i am using. Any thoughts would greatly be appreciated! Thanks
Click to expand...
Click to collapse
are you running it on linux and are you even on fastboot?
Roowz said:
are you running it on linux and are you even on fastboot?
Click to expand...
Click to collapse
I am running it on a linux usb. I was not on fastboot (didnt realize what that was). However I bought the factory cable and tried it in fastboot from startup (amazon fire logo). It will only stay there for about 30 seconds before moving on to normal boot. I tried issuing the sudu command but it just says waiting for device. Thanks again for all the help
jbizub5192 said:
I am running it on a linux usb. I was not on fastboot (didnt realize what that was). However I bought the factory cable and tried it in fastboot from startup (amazon fire logo). It will only stay there for about 30 seconds before moving on to normal boot. I tried issuing the sudu command but it just says waiting for device. Thanks again for all the help
Click to expand...
Click to collapse
open cmd and write "adb reboot bootloader" while you're on fireOs
Roowz said:
Thanks for the quick reply.. But I heard that Amazon patched it on 5.3.7.0.. Is it true? I want to flash lineage os on it
EDIT: I just flashed twrp and lineage os 12.. It's very smooth and to those people who's asking if it's possible to flash twrp/root on 5.3.7.0.. Yes it can.. Feel free to ask me any questions..
Click to expand...
Click to collapse
Hi sorry to bother you but I followed that guide and it wouldn't work. I've thought about doing the downgrading/bricking step (4) first but I don't want to risk bricking my device indefinitely as I need it currently and don't have time to wait around for the equipment to open it.
By following the guide step by step I got stuck at step 3 with the "init step 4" error. So I wonder, since I'm running 5.3.7.0, do I need to run step 4 first or, since step 3 doesn't work, there is no hope? I have a Fire hd 10 on 5.3.7.0 build 650601220
I hope I was clear enough, thank you in advance
Maybe u got error because u are using the files which is for AMAZON FIRE HD 8 2017..Download these files
Brick : https://forum.xda-developers.com/attachment.php?attachmentid=4825063&d=1569194761
amonet-suez : https://forum.xda-developers.com/attachment.php?attachmentid=4731548&stc=1&d=1553629603
extract "brick-suez.zip" and now go to the folder that you just extracted "brick-suez.zip"
once you plugged ur device on fastboot mode
write these command
1.run this command "sudo ./brick.sh" (it will brick if ur device.. YOU NEED TO DO THIS STEP! IT'S VERY IMPORTANT)
-now u successfully bricked ur device.. now ur gonna unbrick it..
Now extract "amonet-suez-v1.1.2.zip" and go to the folder that you extracted "amonet-suez-v1.1.2.zip"
2. run this command "sudo ./bootrom-step.sh"
(this will unbrick the tablet)
3. run this command "sudo ./fastboot-step.sh"
(after a few secs/mins, you will be booted to twrp)
*ALL OF THESE COMMANDS ARE IMPORTANT AND DONT SKIP IT*
Pardon me if my English sucks xD
Roowz said:
Maybe u got error because u are using the files which is for AMAZON FIRE HD 8 2017..Download these files
Brick : https://forum.xda-developers.com/attachment.php?attachmentid=4825063&d=1569194761
amonet-suez : https://forum.xda-developers.com/attachment.php?attachmentid=4731548&stc=1&d=1553629603
extract "brick-suez.zip" and now go to the folder that you just extracted "brick-suez.zip"
once you plugged ur device on fastboot mode
write these command
1.run this command "sudo ./brick.sh" (it will brick if ur device.. YOU NEED TO DO THIS STEP! IT'S VERY IMPORTANT)
-now u successfully bricked ur device.. now ur gonna unbrick it..
Now extract "amonet-suez-v1.1.2.zip" and go to the folder that you extracted "amonet-suez-v1.1.2.zip"
2. run this command "sudo ./bootrom-step.sh"
(this will unbrick the tablet)
3. run this command "sudo ./fastboot-step.sh"
(after a few secs/mins, you will be booted to twrp)
*ALL OF THESE COMMANDS ARE IMPORTANT AND DONT SKIP IT*
Pardon me if my English sucks xD
Click to expand...
Click to collapse
After running "sudo ./bootrom-step.sh" the Terminal shows waiting for bootrom to me, nothing happens.
Could anyone help me, please?