how to connect Z1 to PC in PowerOff mode - Zuk Z1 Q&A, Help & Troubleshooting

i need to Flash my zuk z1 is QPST method.. it need Phone in off condition..when i connected mobile to pc, its again turned on. i can't flash image to that.
and : my recovery was gone. bcz i flashed zuk z1 recovery, and after i flashed "redmi recovery" unfortunately. then i cant access my recovery. i need to refresh again.

Praveenvee said:
i need to Flash my zuk z1 is QPST method.. it need Phone in off condition..when i connected mobile to pc, its again turned on. i can't flash image to that.
and : my recovery was gone. bcz i flashed zuk z1 recovery, and after i flashed "redmi recovery" unfortunately. then i cant access my recovery. i need to refresh again.
Click to expand...
Click to collapse
It would be nice if you concentrate your discussion on on thread instead creating for replies a new one https://forum.xda-developers.com/zuk-z1/help/confusing-problem-zuk-z1-t3808607
Otherwise it's too confusing for everyone.
Please copy your post content there as an reply.
Thanks!

Related

[RECOVERY][STOCK] Lenovo A6000 Plus stock Recovery

Hello Lenovers...
Lately i've been through many user posts asking for the A6000 Plus "Stock Recovery"
Alrighty... I just managed to grab the file from my device and thought of sharing the same here with all fellow Lenovers...
Be warned that this is not a .zip flashable file... If you're rooted then, use "Flashify" from Playstore to flash this...
CLICK HERE TO DOWNLOAD
Please hit THANKS if I helped.
Bro, try to backup the kernel which have the same size.
thanks
sorry for english
flash with boot img , recovery img or zip file? what type this stock rom file?
post kernel
Give me also kernel
My mobile was ran into problem. Please help! Urgent
Recently I was tried to update mobile firmware (latest Kraft-A6000-S_S014_150730) by OTA update (via system settings->about phone->system update), that time my mobile was soft bricked. I downloaded firmware and installed then some time after got some options menu. And I attached that problem as picture.
Before that I rooted my mobile using KINGROOT apk v4.0 , there after I did unroot again using in the same app.
I thought unrooted mobile does not affect by system update (any firmware or OTA update by LENOVO). But unfortunately my mobile got problem.
I didn't took any backup before that. I don't know anything about CWM backup and all. I know only the root and unroot using KINGROOT app.
I need to recover my mobile back or tell me how to install LENOVO A6000 PLUS stock ROM or any other way is there tell me to solve the problem. Please guide me step by step process or any video link there it was little better to understand for me.
Please help me, it will be appreciated. Thanks.
follow this
First remove the battery completely, then insert it and simultaneosly hold Volume UP button + power button and then release power button when ur phone switches on and continue holding volume up button, then you will find an option called fastboot/bootloader, select that option, then phone screen will not be showing lenovo logo and powered by android stay there. connect your phone to pc via usb cable.
1. Google for Minimal ADB and fastboot, you will get a zip file package, install it.
2. then go that minimal ADB folder in C:\ and press shift and right click on mouse, select use command prompt here. it will take to DOS screen
3. copy this TWRP recovery.img in that minimal adb folder(C:\minimal adb). Link here. http://forum.xda-developers.com/android/development/twrp-lenovo-a6000-a6000-t3156149
4. now type fastboot devices in command prompt
5. It will show list of devices attached, it will show only if your phone is in fastboot mode.
6. then enter the following command: fastboot boot recovery.img
7. Wait for few seconds, it will load TWRP automatically
8. Take backup if any, and wipe advanced settings including Dalvik cache.
9. Then you will be able to find your device internal storage in my computer
10. Copy lenovo stock rom zip file to your phone. (Search google for Stock ROM of Lenovo A6000)
11. Now select Install on TWRP menu and from Internal Memory, go to data folder, you will find your zip file, select it and install.
12. It will install automatically and boots up with new Stock ROM.
Thanks
arjsreddi said:
First remove the battery completely, then insert it and simultaneosly hold Volume UP button + power button and then release power button when ur phone switches on and continue holding volume up button, then you will find an option called fastboot/bootloader, select that option, then phone screen will not be showing lenovo logo and powered by android stay there. connect your phone to pc via usb cable.
1. Google for Minimal ADB and fastboot, you will get a zip file package, install it.
2. then go that minimal ADB folder in C:\ and press shift and right click on mouse, select use command prompt here. it will take to DOS screen
3. copy this TWRP recovery.img in that minimal adb folder(C:\minimal adb). Link here. http://forum.xda-developers.com/android/development/twrp-lenovo-a6000-a6000-t3156149
4. now type fastboot devices in command prompt
5. It will show list of devices attached, it will show only if your phone is in fastboot mode.
6. then enter the following command: fastboot boot recovery.img
7. Wait for few seconds, it will load TWRP automatically
8. Take backup if any, and wipe advanced settings including Dalvik cache.
9. Then you will be able to find your device internal storage in my computer
10. Copy lenovo stock rom zip file to your phone. (Search google for Stock ROM of Lenovo A6000)
11. Now select Install on TWRP menu and from Internal Memory, go to data folder, you will find your zip file, select it and install.
12. It will install automatically and boots up with new Stock ROM.
Thanks
Click to expand...
Click to collapse
Bro Will OTA updates work after doing this???
No
No I don't think so, I have an OTA update waiting, but i don't want to do it now, in between the week as I don't have another mobile if phone gets bricked, will try this weekend.
No Stock Rom
Theres still no stock rom available for A6000 Plus..
arjsreddi said:
No I don't think so, I have an OTA update waiting, but i don't want to do it now, in between the week as I don't have another mobile if phone gets bricked, will try this weekend.
Click to expand...
Click to collapse
Bro Did you try updating your device. And how did you root your device by using kingroot or superuser? I just rooted my lenovo a6000 plus by superuser using cwm. I just wanna know can i unroot my device by the native superuser full unroot option and install ota when lolipop is available without bricking my device?
I ve heard that people who rooted their lenovo a6000 plus with kingroot had problems to unroot and install ota updates is it the same case with superuser?
Same Here!!
iyyappan11 said:
Recently I was tried to update mobile firmware (latest Kraft-A6000-S_S014_150730) by OTA update (via system settings->about phone->system update), that time my mobile was soft bricked. I downloaded firmware and installed then some time after got some options menu. And I attached that problem as picture.
Before that I rooted my mobile using KINGROOT apk v4.0 , there after I did unroot again using in the same app.
I thought unrooted mobile does not affect by system update (any firmware or OTA update by LENOVO). But unfortunately my mobile got problem.
I didn't took any backup before that. I don't know anything about CWM backup and all. I know only the root and unroot using KINGROOT app.
I need to recover my mobile back or tell me how to install LENOVO A6000 PLUS stock ROM or any other way is there tell me to solve the problem. Please guide me step by step process or any video link there it was little better to understand for me.
Please help me, it will be appreciated. Thanks.
Click to expand...
Click to collapse
I am Also Facing The Same Problem
sizzlingtycoon said:
Hello Lenovers...
Lately i've been through many user posts asking for the A6000 Plus "Stock Recovery"
Alrighty... I just managed to grab the file from my device and thought of sharing the same here with all fellow Lenovers...
Be warned that this is not a .zip flashable file... If you're rooted then, use "Flashify" from Playstore to flash this...
CLICK HERE TO DOWNLOAD
Please hit THANKS if I helped.
Click to expand...
Click to collapse
can you please share the instructions in short to flash this recovery. And will the ota updates work ? I guess they will work.
You mentioned the flashify app and I have never used an app to flash a recovery.img
for lenovo a6000
Can u please arrange stock recovery for lenovo a6000. thank you in advance
I have unbricked my lenovo a6000 anyone wants to know just reply to this post
Phone_Beast said:
I have unbricked my lenovo a6000 anyone wants to know just reply to this post
Click to expand...
Click to collapse
please man help me.. i am on stock rom of Lenovo A6000 .. but i want stock recovery.. i am not able to find it.. i want A6000 not A6000 plus ..please help me
jashmon said:
please man help me.. i am on stock rom of Lenovo A6000 .. but i want stock recovery.. i am not able to find it.. i want A6000 not A6000 plus ..please help me
Click to expand...
Click to collapse
Stock recovery for your phone is on the first page of this thread. Download the file, rename it to recovery.img and then flash it using fastboot.
Will this work for a6000 as well ??
phone soft bricked?? plz help
I think my lenovo a6000 plus has been softbricked as it doesn't get pass the logo screen. also recovery mode is not opening ( tried every combination). Help me with this. This phone has really checked up my nerves. the reason for flashing this phone as it had a problem of automatically downloading apps without consent, and video apps popping out in the middle of night(time service, monkey test apps), so the only best solution i found was to flash it( tried every other possibility- factory reset, password change...etc everything). Now it has died on me, can't get pass the logo screen. Also connecting the phone to pc gives me multiple drive partitions. Please help.
Try to flash any custom rom..but first flash custom recovery using minimal and fastboot

[q] urgent!!! How to install cwm on soft bricked lenovo a6000 plus

How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
query
I am also having the same problem......
can anyone help?
please plesae
vokkus kreatif said:
How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
Click to expand...
Click to collapse
Same here...
Did you find any solution
lenovo a60000 ran into problem
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
SAME same seems like there is no help out there and we might have to use our phones as paperweight!
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
thanks a lot dude finally my phone got new life thanks to you and boycracked
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
vinod352 said:
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
Click to expand...
Click to collapse
1. Download custom recovery for lenovo a6000 lollipop, just googling "[A6000]TWRP-2.8.6.0_no_theme.img" (without quotes)
2. download installation zip of supersu from chainfire, just googling "BETA-SuperSU-v2.49.zip" (without quotes)
3. Enter to fastboot, type "fastboot boot [A6000]TWRP-2.8.6.0_no_theme.img" (without quotes) in cmd/terminal. wait for a moment... until your phone land on custom recovery (TWRP)
4. flash file "BETA-SuperSU-v2.49.zip".
Sent from my Lenovo A6000 using XDA Free mobile app
Bro Thanx for reply.I will try and I'll tell here if it success
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
Thanks!
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
Thanks.
I did see the boycracked website but i couldn't get my deivce into 9008 mode..thanks a lot
Not able to enter the recovery
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Flash stock recovery with fastboot
BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
gks131 said:
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
Click to expand...
Click to collapse
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
BenNy tHa said:
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
Click to expand...
Click to collapse
If you are on lollipop flash this one
http://www.mediafire.com/?7d6aoevnk52cg5i
Use fastboot flash recovery recovery.img
My phone does not reboot
batmanx0369 said:
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
Click to expand...
Click to collapse
same problem ; please post if u have found a solution
kanna9999 said:
same problem ; please post if u have found a solution
Click to expand...
Click to collapse
Just use fastboot to flash twrp 3.0.0 by sevenmax (just Google it)
Command:
Fastboot flash recovery (then recovery name.zip or .img)
Then flash from it the rom you like
Sent from my GT-I9300I using Tapatalk

Bricked Zuk Z1

Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
shubhambhise said:
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
Click to expand...
Click to collapse
Hello,
I got help on the telegram group, we try many thing, the result is that I can only get ZUI working, if flashing COS via QFIL, I get the same result, if I flash ZUI, unlock bootloader, flash TWRP, wipe everything, then sideload CM13, TWRP say that no os is installed and I get a bootloop at the bootloader ...
ZUI is good, but I get some error regarding notification.
If you have any other idea ?
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Hope this will help you
Check this out
http://forum.xda-developers.com/zuk-z1/help/helpppp-t3505990
http://forum.xda-developers.com/zuk-z1/general/guide-how-to-unlock-root-install-twrp-t3394037
This will help you

Vivo 5r - Bootloop - No recovery or bootloader

Hi all.
I was having fun with my new BLU Vivo 5R and did a mistake flashing the wrong recovery. After booting the phone got stuck in bootloop. This is normal, happened with almost every phone. But the trick here is: I cant get to recovery or bootloader!!
The Power + plus/minus Volume keys doesnt work!! (or recovery and bootloader are both broken).
I have read more than 1000 of threads and couldnt find somebody with the same issue fixed.
Basically the phone boots and it shows the "BLU Bold like us" whit screen and boots again...
Any help or link to anything that can make my almost new phone boot to fastboot or something else? I'm willing to open the phone also, but I dont think its gonna help ...
Thanks in advance.
Hi there,
I will move your thread in the correct forum dedicated to Blu Vivo 5R Q&A for more relevant answers.
Good luck
hernol said:
Hi all.
I was having fun with my new BLU Vivo 5R and did a mistake flashing the wrong recovery. After booting the phone got stuck in bootloop. This is normal, happened with almost every phone. But the trick here is: I cant get to recovery or bootloader!!
The Power + plus/minus Volume keys doesnt work!! (or recovery and bootloader are both broken).
I have read more than 1000 of threads and couldnt find somebody with the same issue fixed.
Basically the phone boots and it shows the "BLU Bold like us" whit screen and boots again...
Any help or link to anything that can make my almost new phone boot to fastboot or something else? I'm willing to open the phone also, but I dont think its gonna help ...
Thanks in advance.
Click to expand...
Click to collapse
Hi,
you need to download stock Rom from here https://forum.xda-developers.com/vivo-5r/how-to/blu-vivo-5r-stock-roms-bluv0090eev11-t3492756
Unzip the folder and flash only recovery and bootloader to your phone using SP flash tool (learn how to use SPflash tool before flashing). If it won't help flash full stock rom, but this step will wipe all your data.
After that if you want to flash custom recovery or root your phone follow step by step this tutorial https://forum.xda-developers.com/vivo-5r/how-to/how-to-root-blu-vivo-5r-t3492718
Good luck:good:
use SP flash
Use SP flash. Download ROM from needrom.com. use download only . Mtk Roms are hard to brick. With SP flash Everytime ROM peer cycles SP flash with start download. U can fix problem with SP flash.

Unable to boot - Oneplus8 pro

Hi Everyone,
I have an issue with my Oneplus8 pro and below are the details
1. The device was working perfectly. I was interested to root the device and install a custom ROM.
2. The method used was to try and flash a patched boot image for the device but I think i landed up using a wrong boot image file.
3. The OS was on 10.5.10 if I remember correctly. I used a patched image file I suppose of an older firmware. Now restarts and goes to "QUALCOMM Crashdump mode". The only options are
a. reboot to fastboot mode
b. flash the TWRP for Oneplus 8 pro but that doesnt mount by storage so cant really transfer anything to flash again.
Requesting some help to fix the issue and apologies if i have not explained correctly.
Tried booting a stock boot image?
neverborn said:
Tried booting a stock boot image?
Click to expand...
Click to collapse
Hey,
Thank you for a quick repsonse. Yes, i had tried doing that and still the same error however while we speak, i just downloaded the msmDownloadtool and tried using it to flash a stock firmware and finally, i am so happy to see the device boot sucessfully
Thank you once again for tryin to help
Regards
Hello.
Clarify exactly how the procedure took place

Categories

Resources