Database Users

[ROOT/TWRP] Asus Zenfone Go ZC500TG/Z00VD

First and all, DO THIS AT YOUR OWN RISK!*Credits goes to the devs of 4pda.ru for discovering this method and to Pedro Fortunato for sharing the link.
REQUIREMENTS, PREREQUISITES
Computer, Laptop will do.Asus Zenfone Go Unit - obviously
Adb drivers -*https://mega.nz/#!2scCERxC!gbNd6tJcrUAkn4nv7kU2DBsnSEv8G6-GfZVVl9g97fI download this.
ADB, Root file, Twrp - https://mega.nz/#!HtN03SCa!WxQJ3a33C0XkuE20qv0rYwvxcYrGxZtMk-4jQeL1ykU
Methods
1. PREPARE THE FILES ON YOUR COMPUTER AND PHONE
a. On your computer, Install ADB drivers and extract the files on the given link. To Install the driver, extract the one given from the link and right click on android_winusb.inf and select install. Another way to install it is to download from adbdriver.com and download th ADB Driver Installer.​b. On your device enable developer option by tapping build number on about phone.​c. Go to Developer options - turn on Allow OEM Unlocking and Usb Debugging.​2. UNLOCK YOUR BOOTLOADER
a. Turn off your devices.​b. Press Volume up + power simultaneously to go to the bootloader​c. Use volume up to navigate and navigate to fastboot, select by pressing volume down​d. On your computer, go to the extracted file (the one i provided from mega.nz) and press shift + right click, the select open command window here.​e. Once on the command prompt type​fastboot devices​f. if your device appeared (denoted by serial number and device) type​fastboot oem unlock​g. on your device, follow the on screen instruction, press volume up to agree on unlocking bootloader​NOTE THIS WILL FORMAT YOUR DEVICE SO MAKE SURE YOU ENSURE YOU BACKED UP
h. Wait for it to return to fastboot mode.*Reboot. If you cant reboot it, reinsert battery and turn it on, it will now format your device. It will usually take time to boot so be patient.​i. Once booted go back to developer options again and enable oem unlock and usb debugging.​3. FLASHING TWRP RECOVERY
Done with unlocking? Lets proceed to flashing TWRP RECOVERY.​[WARNING AGAIN: DO THIS AT YOUR OWN RISK. DOUBLE CHECK THE FILES, DOUBLE CHECK THE*COMMANDS THAT YOU TYPE]
a. On your pc, again go to the extracted file, open the command prompt as instructed before and type this​ adb reboot bootloader​b. Your phone will restart to bootloader again, select fastboot again. Dont close the cmd.​c. On the command prompt type​fastboot flash recovery recovery.img​d. It will now flash the twrp. Ensure that the recovery is flashed correctly.​e. Reboot to recovery by holding volume up + down + power to shut it down without removing rom pc and by pressing vol up and power to boot to bootloader and selecting recovery.​f. IF YOU ARE NOW ON THE TWRP. CONGRATS. You have only one thing to do. Flash the root package.​4. FLASHING THE ROOT PACKAGE
a. Boot your phone and copy the root package to your internal storage.​b.Reboot to TWRP Recovery, once there select install and browse for UPDATE-SuperSU-v2.46.zip you just copied, swipe to install. Then viola! YOUR PHONE IS NOW ROOTED.​
AGAIN, I WILL NOT BE HELD LIABLE IF YOUR PHONE DIED, EXPLODED, ATE YOU OR COMMITTED SUICIDE. AGAIN AGAIN. ALL CREDITS GOES TO THE DEVS OF 4pda.ru especially Jemmini for the TWRP Recovery

Yea please there's more people looking for it here at xda

me too I have the same problem! any solution? please help and happy new year!

yes please

Yeah im waiting too , please where people that knowledge about root please makes for asus zenfone go

How root asuse zenfone go?

I think we should root this phone like rooting other mtk devices
sorry for my bad english

keityrobins said:
Hello. I would like to ask for help about our phone. As of now there are no working rooting method available and we cannot move apps to sd since asus disabled that option, our internal storage is therefore limiting us to install more apps. Anyone knows how to root it would be of great help.
Asus Zenfone Go has MT680 chipset running android 5.1.
Click to expand...
Click to collapse
Hello! There was a fully working right way to get Root! The forum 4pda found a solution to this problem :good:

it seems the Russians have done it
http://4pda.ru/forum/index.php?showtopic=698725&view=findpost&p=45947797
would anyone like to try?
please post feedback here!

burovik26 said:
Hello! There was a fully working right way to get Root! The forum 4pda found a solution to this problem :good:
Click to expand...
Click to collapse
will try

pedrofortunato said:
it seems the Russians have done it
http://4pda.ru/forum/index.php?showtopic=698725&view=findpost&p=45947797
would anyone like to try?
please post feedback here!
Click to expand...
Click to collapse
will try and feedback

THE TWRP WORKED. However the root package i had didn't installed the su binary and superuser cannot install it, will try more. Here is the link to the twrp - ftp://1 09.87.84.155/Asus_Zenfone_Go/Recovery/TWRP/2.8.7.0/recovery.img - remove the space between 1 and 0

guys it worked. rooted mine now.

keityrobins said:
guys it worked. rooted mine now.
Click to expand...
Click to collapse
could you make a step by step in english?
and does it erase all data on the phone?

pedrofortunato said:
could you make a step by step in english?
and does it erase all data on the phone?
Click to expand...
Click to collapse
Will do. Thanks for linking And yes on unlocking the bootloader part, it will erase your data.

where should i post the tutorial?

First and all, DO THIS AT YOUR OWN RISK!*Credits goes to the devs of 4pda.ru for discovering this method and to Pedro Fortunato for sharing the link.
REQUIREMENTS, PREREQUISITES
Computer, Laptop will do.Asus Zenfone Go Unit - obviously
Adb drivers -*https://mega.nz/#!2scCERxC!gbNd6tJcrUAkn4nv7kU2DBsnSEv8G6-GfZVVl9g97fI download this.
ADB, Root file, Twrp - https://mega.nz/#!HtN03SCa!WxQJ3a33C0XkuE20qv0rYwvxcYrGxZtMk-4jQeL1ykU
Methods
1. PREPARE THE FILES ON YOUR COMPUTER AND PHONE
a. On your computer, Install ADB drivers and extract the files on the given link. To Install the driver, extract the one given from the link and right click on android_winusb.inf and select install. Another way to install it is to download from adbdriver.com and download th ADB Driver Installer.​b. On your device enable developer option by tapping build number on about phone.​c. Go to Developer options - turn on Allow OEM Unlocking and Usb Debugging.​2. UNLOCK YOUR BOOTLOADER
a. Turn off your devices.​b. Press Volume up + power simultaneously to go to the bootloader​c. Use volume up to navigate and navigate to fastboot, select by pressing volume down​d. On your computer, go to the extracted file (the one i provided from mega.nz) and press shift + right click, the select open command window here.​e. Once on the command prompt type​fastboot devices​f. if your device appeared (denoted by serial number and device) type​fastboot oem unlock​g. on your device, follow the on screen instruction, press volume up to agree on unlocking bootloader​NOTE THIS WILL FORMAT YOUR DEVICE SO MAKE SURE YOU ENSURE YOU BACKED UP
h. Wait for it to return to fastboot mode.*Reboot. If you cant reboot it, reinsert battery and turn it on, it will now format your device. It will usually take time to boot so be patient.​i. Once booted go back to developer options again and enable oem unlock and usb debugging.​3. FLASHING TWRP RECOVERY
Done with unlocking? Lets proceed to flashing TWRP RECOVERY.​[WARNING AGAIN: DO THIS AT YOUR OWN RISK. DOUBLE CHECK THE FILES, DOUBLE CHECK THE*COMMANDS THAT YOU TYPE]
a. On your pc, again go to the extracted file, open the command prompt as instructed before and type this​ adb reboot bootloader​b. Your phone will restart to bootloader again, select fastboot again. Dont close the cmd.​c. On the command prompt type​fastboot flash recovery recovery.img​d. It will now flash the twrp. Ensure that the recovery is flashed correctly.​e. Reboot to recovery by holding volume up + down + power to shut it down without removing rom pc and by pressing vol up and power to boot to bootloader and selecting recovery.​f. IF YOU ARE NOW ON THE TWRP. CONGRATS. You have only one thing to do. Flash the root package.​4. FLASHING THE ROOT PACKAGE
a. Boot your phone and copy the root package to your internal storage.​b.Reboot to TWRP Recovery, once there select install and browse for UPDATE-SuperSU-v2.46.zip you just copied, swipe to install. Then viola! YOUR PHONE IS NOW ROOTED.​
AGAIN, I WILL NOT BE HELD LIABLE IF YOUR PHONE DIED, EXPLODED, ATE YOU OR COMMITTED SUICIDE. AGAIN AGAIN. ALL CREDITS GOES TO THE DEVS OF 4pda.ru especially Jemmini for the TWRP Recovery

if the adb driver dont work -http://adbdriver.com/downloads

keityrobins said:
if the adb driver dont work -http://adbdriver.com/downloads
Click to expand...
Click to collapse
thank you so much! since there's more than 3 threads about the same thing I don't think it's a bad idea to create a new one for this tutorial

pedrofortunato said:
thank you so much! since there's more than 3 threads about the same thing I don't think it's a bad idea to create a new one for this tutorial
Click to expand...
Click to collapse
then lets create a new one, but first let me know if there are mistakes on the tutorial.

[GUIDE] Unlock permission + Unlock bootloader + TWRP + LineageOS + Open GApps

Updated post for Lineage OS 14.1
Thanks a lot to @Anik_khan , @P.Kosunen , TWRP and CM team and all XDA forumers who asked questions that allowed me to update my phone.
I am not responsible for any trouble you might run into, always cross-check your sources.
Whole process took me 1h15 / 1h30
Will rework/add links upon request, will quote names upon request,
Thanks,
Sources/Links:
http://forum.xda-developers.com/redmi-3/development/recovery-twrp-3-0-0-0-touch-recovery-t3340118
https://forum.xda-developers.com/redmi-3/development/rom-cyanogenmod-14-0-t3481701
http://forum.xda-developers.com/red...eveloper-rom-unlock-bootloader-t3339246/page6
http://en.miui.com/unlock/
Miflash: http://api.bbs.miui.com/url/MiFlash
Mi Unlock: http://bigota.d.miui.com/miflashunlock/MiFlashUnlock_1.1.0317.1_en.zip
http://en.miui.com/download-298.html
http://en.miui.com/a-234.html
https://twrp.me/devices/xiaomiredmi3.html
Others...
Request unlocking permission:
Go to http://en.miui.com/unlock/
"Unlock Now" (refresh if page fails to load)
Create a "Mi Account ID" (you can also create it from your phone Miui app)
Apply for unlocking permission: Your Name, Phone number, Justification "Android developer"
Download "Mi Unlock": http://en.miui.com/unlock/download_en.html
Extract "Mi Unlock" file ("MiFlashUnlock")
Install developer ROM:
Download Miflash tool http://api.bbs.miui.com/url/MiFlash
Install Miflash tool
Restart computer as per section: Windows 10 "Disable driver signature enforcement"
Download last Chinese developer ROM for Xiaomi Redmi 3 http://en.miui.com/a-234.html
Note: Global ROM does not allow for ROOT activation
Extract ROM, tgz, then tar
Reboot to recovery, power off, power on "Vol. up" + "Power"
Touch "Download" button (screen goes black)
Plug-in USB cable
Open Miflash tool
Click "Browse" and select directory from ROM extract
Select "Flash all" at the bottom
Click "Refresh" and then "Flash", wait for install
...
Maintain "Power" to reset the phone, let it boot
(You can also install whatever official MIUI ROM you want from there http://en.miui.com/a-234.html)
Windows 10 "Disable driver signature enforcement":
Maintain "Shift" key while you click the "Restart" option in Windows
"Troubleshoot" > "Advanced options" > "Startup settings" > "Restart"
...restarting...
F7 "Disable driver signature enforcement"
Unlock Bootloader:
AFTER YOU GET APPROVAL SMS (last request took 15 minutes to be accepted)
Ensure you installed a developer ROM ("Flash all")
Skip everything
Note: Login with your MIUI account if you have never done it, do NOT activate FIND application
Power OFF device
Start fastboot, hold "Vol. down" + "Power"
Execute "MiFlashUnlock.exe" from "Mi Unlock" extract
Agree and "Sign in" with your created "Mi Account ID"
Connect phone
Unlock
Restart...
Install TWRP:
Connect device to computer
Connect to WIFI
Activate Root on the phone (different from TWRP): Setting > Permissions > Root access
Activate root access
Phone will install and restart
...meanwhile...
Install Android tools https://developer.android.com/studio/index.html#linux-bundle-size
(Install Java SDK)
...phone restarted...
Run Windows command prompt as administrator
"Windows" key, type "CMD", right click "Run as administrator"
Execute "cd C:\Program Files (x86)\Android\android-sdk\platform-tools"
Or whatever is your path to Android SDK
Execute "adb devices", ensure that your phone is listed
Execute "adb root"
Execute "adb disable-verity" (Note: You do not need to perform this step again if you want to UPDATE TWRP version)
Restart... (disable verity to take effect)
Download TWRP application
http://download.jmzsoftware.com/TWRPManager.apk
Copy it at the root of your phone
Install it from MIUI embedded file explorer
Start TWRP application and wait for phone to prompt for root access
Give TWRP Root acess: Settings > Permissions (Device) > Root access
Allow TWRP root access (Next to all, long...)
Launch TWRP
Click sandwich menu ///
Install TWRP
DEVICE INFO > Device name: Xiaomi Redmi 3 / ido
INSTALL > Recovery version to install > click latest
INSTALL > Install Recovery
TWRP will download and install itself (Click Yes to try flash, Yes to reboot to recovery)
Install CM and GApps:
Download Lineage OS: https://forum.xda-developers.com/redmi-3/development/rom-cyanogenmod-14-0-t3481701
Download GApps ARM64 (7.1 for LineageOS 14.1): http://opengapps.org/
https://github.com/opengapps/opengapps/wiki/FAQ
Connect device to computer
Reboot to recovery (see "Reboot to recovery")
Select "Keep read only"
Manually wipe Data partition and System partition
(I wiped all because of "can't install this package on top of incompatible data" message)
Copy CM and GApps to phone
On TWRP: Install and flash ROM and GApps (add to queue, GApps takes a while)
Wipe Dalvik & Cache
Reboot
Recovery reboot:
- On CM
https://wiki.cyanogenmod.org/w/All_About_Recovery_Images
Activate Developer mode: https://wiki.cyanogenmod.org/w/Doc:_developer_options
Settings > Developer options > Advanced reboot = On
Hold the power button to see the reboot menu
- Using ADB
Run command prompt as administrator
cd C:\Program Files (x86)\Android\android-sdk\platform-tools
adb reboot recovery

Thanks man, awesome job!

Hey guys. Thanks for the guide, I'm stuck however. I installed the latest global developer ROM in order to root and flash twrp, but there is no native option to root the ROM. What am I doing wrong? Bootloader is unlocked with xiaomi approval. Or is root China Rev ROM exclusive? If yes, the op should make that very clear, so that even dimwits like me understand it.

Rotpeter said:
Hey guys. Thanks for the guide, I'm stuck however. I installed the latest global developer ROM in order to root and flash twrp, but there is no native option to root the ROM. What am I doing wrong? Bootloader is unlocked with xiaomi approval. Or is root China Rev ROM exclusive? If yes, the op should make that very clear, so that even dimwits like me understand it.
Click to expand...
Click to collapse
Hi there,
I did not use global ROM, true, don't know if possible with it.
Did you perform this step?
- Connect to WIFI
- Setting > Permissions > Root access
- Activate root access
The phone will then download a bunch of things and reboot.
After that you will be able to install TWRP and give it root access.
If not, tell me, I will update guide,
and you can reinstall Chinese ROM, to complete process, a matter of a few minutes.
Let me know

Thanks for your help! I already fixed in in the meantime, though. The permissions app only shows the root-button, if you are on the Chinese dev ROM. Which I wasn't (global one instead). Maybe you should add some extra weight to that in the guide. Other than that, it worked like a charm! Thanks buddy!
Edit: Sorry, didn't see that you pretty much already wrote all of that.

anyone else waiting more than two days for the request to be accepted?

en.miui.com/unlock/download_en.html
without waiting

Hi,
I have problem after this step
Install TWRP:
TWRP will download and install itself (Click Yes to try flash, Yes to reboot to recovery)
Click to expand...
Click to collapse
Answer from TWRP is Success, but after reboot to recovery there is no TWRP, just MI logo all the time.
Model is Redmi 3S Global
and of course:
C:\xx\platform-tools>adb disable-verity
Verity already disabled on /system
Click to expand...
Click to collapse

Have you downloaded the TWRP version for the 3 S? Not the Redmi 3?
I am not sure what are the differences here, but maybe the phone cannot boot if it is the wrong version.

parphane said:
Have you downloaded the TWRP version for the 3 S? Not the Redmi 3?
I am not sure what are the differences here, but maybe the phone cannot boot if it is the wrong version.
Click to expand...
Click to collapse
sorry, I realized that not all Redmi 3 are ido, my is land :crying: so TWRP for land is working

Hi all,
I am on:
- 02-06 nightly (https://download.lineageos.org/ido)
- ARM64 7.1 Stock GApps (http://opengapps.org/)
Camera app is not working at all, crashing instantly,
Do you know what could I have missed? Maybe not wiped correctly?
What could I do to troubleshoot/fix?
Thanks,
Answered: Inhibit Camera app automatic updates for the moment...

Updated post for LineageOS 14.1 and checked if links are still ok.

Hello there,
I need a little help : I get stuck trying to install the latest Chinese developper ROM.
I get a "ping target failed" error, as seen in the pic here : http://hpics.li/32bd109
Can you help me please ?
Galdanor

Galdanor said:
Hello there,
I need a little help : I get stuck trying to install the latest Chinese developper ROM.
I get a "ping target failed" error, as seen in the pic here : http://hpics.li/32bd109
Can you help me please ?
Galdanor
Click to expand...
Click to collapse
Hmm, never seen that one,
Just to be sure, you did the following steps:
- Restart computer as per section: Windows 10 "Disable driver signature enforcement"
[...]
- Reboot to recovery, power off, power on "Vol. up" + "Power"
- Touch "Download" button (screen goes black)
- Plug-in USB cable
- Open Miflash tool... (this I know you did cause of the screen capture)
Do you have any devices identified as not properly installed in the Window peripherals?
Maybe try and install Android tools (also in the tuto) before and try to issue commands to your device.
Also, Googling "ping target failed xiaomi" I found that: http://en.miui.com/thread-354050-1-1.html
You might want to use older tool version.
Let us know

Thank you for your time.
parphane said:
Also, Googling "ping target failed xiaomi" I found that: http://en.miui.com/thread-354050-1-1.html
You might want to use older tool version.
Let us know
Click to expand...
Click to collapse
This worked !
Can't believe I didn't google my error thoroughly... Seems that the older I get, the lazier I become...
Just need to wait for the approval SMS now.
Thanks a lot for your help !
Galdanor

ambient display (dt2w option) for me don't work

wetito said:
ambient display (dt2w option) for me don't work
Click to expand...
Click to collapse
We don't have DT2W support by default.
Sent from my Redmi 3 using XDA Labs

This rom drain my battere a lot. It's a Shame. 8 hours in aeroporto mode, 20% battery less

wetito said:
This rom drain my battere a lot. It's a Shame. 8 hours in aeroporto mode, 20% battery less
Click to expand...
Click to collapse
Maybe you did something wrong cause most of the people here on XDA have no issue.
Try using an older ROM, or clean install... let us know!
By the way, this is just a guide to flashing,
Which I believe was useful for you cause you were able to change ROM.
Don't report bugs/issues on the ROM here, it is just a guide, report them on the ROM thread itself: https://forum.xda-developers.com/redmi-3/development/rom-cyanogenmod-14-0-t3481701

Hey guys,
I really do not know what to do.
with redmi one - i did not have problems - ok only one time
now I tried to put new international rom on my redmi 3 in holiday. I really treid it for at least 10 hours now! no success. I think, i am stupid....
flash unlock with sms and tool "miflash_unlock-en-2.2.406.5" worked.
next step is to power off and turn on with power up and power button.
If I do this, the redmi device always goes to fastboot picture rabbit and does not react to anything.
At this point I could not do anything. I always waited until accu was empty (1day) and then try it again in some other way.
Is there some really good guide? I do not know what i am doing wrong.
thank you in advance.
my redmi 3s crashed yesterday and i have the same problem now.
see here:
https://forum.xda-developers.com/xiaomi-redmi-3s/help/phone-crashed-fingerprint-deleted-120-t3603930
for redmi 3 i downloaded a lot:
roms
02 MiFlashUnlock
03 TWRP
05 Root SuperSU
TWPR and RootSuperuser i do not get installed, too.

[Guide] Flash Stock Rom Asus Zenfone 2 ZE551ML

Hey Guys. This guide will help you if
1. If Using Custom Rom and want to revert to latest stock rom.
2. If Stock Rom got corrupted or became laggy.
3. You want to reinstall stock rom.
Warning:
1. Method 1 require unlocked bootloader. If you want to unlock then go Here . Method 2 doesn't. Don't worry.
2. This will clean your phone just like new phone.
3. First read the post twice carefully then proceed.
4. ALL .bat FILES TO BE RUN IN FASTBOOT MODE ONLY, IF YOU DON'T KNOW ABOUT FASTBOOT MODE THEN GOOGLE "HOW TO GET FASTBOOT MODE IN ASUS ZENFONE 2
5. I may change name of files in folder. Use common sense to identify them.
Pre-requisites:
1. Charge your phone atleast 60%.
2. Backup any important data you might not wanna loose to either sd card or usb drive or pc.
3. Copy the rom zip in the sd card of your phone. (The one with size in GB)
4. Android USB Driver should be installed already, if it is not then install all drivers in the "Drivers Folder".
5. Enable USB Debugging.
For that go to "Settings" ,Scroll to bottom goto "about", goto "Software Information", tap "Build number" upto 7 times or till it
says "You are a developer now". Then go to "Settings" you will find "Developer Options", open it and enable "USB Debugging"
4. Common sense, patience.
Download Link:
For Method 1
Click here Android Filehost
Download these folders: TWRP, STOCK RECOVERY, STOCK ROM, DRIVERS
For Method 2
https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966
Procedure:
METHOD 1​Step 1. Flash TWRP recovery if not installed by using "TWRP.bat" (Given in twrp folder) in fastboot mode or bootloader mode whatever you call it.
Step 2. Go to Twrp recovery then choose "wipe" then choose "Advance wipe" and tick everything except "SD card or external sd card". then swipe to wipe.
Step 3. Go to fastboot/bootloader mode and flash stock recovery running appropriate .bat file. It is given in "Stock Recovery" folder.
Step 4. When the command executes from the above step, Go to "recovery" by pressing volume down button, then press "power" button.
Step 5. You will see a dead android logo. Nothing else. Then go to stock recovery options.
If you don't know how then use following methods
Method 1:
When you see a dead android bot with an error press and hold power button, then (while holding power button) quickly press Vol up and release and then release power button..
Method 2:
Go to fastboot mode. Connect your device and open command prompt there. Then Type
Code:
fastboot erase cache
Step 6: You should see stock recovery options. Then choose "Update from sd card" and select the rom zip you pasted in SD card.
(If you don't have sd card, then paste rom in internal memory and don't tick "internal storage" in twrp in step 2) But micro
sd is preferable.
Step 7: Wait. Your phone may take 20-30 or more minutes. So leave it on charging.
METHOD 2​Step 1: Download and Install all drivers given in download folder. Download RAW firmware for your phone. See above in download links.
Step 2: Install "ASUS FLASH TOOL"
Step 3: Go to fastboot/bootloader mode on your phone. Run asus flash tool, select your phone model and browse for the raw firmware. Check wipe all data. And start the process.
Step 4: Wait for program to say successful. If it takes more than 30 minutes. Disconnect your phone and check phone if rom installed or not.
If this process does not work. Then switch methods.
If you have any questions, problems .. Just Comment it.
Every Suggestion welcomed. Also you can join telegram group to get help and help others.
MOD EDIT: LINK REMOVED
If the guide works for you or you want to thank me for development of tools then you can donate me via
Paypal paypal.me/KapilTapsi (You can donate any amount, It will be of great help)
FAQ
1. Having problems with device connection? like waiting for device.
Sol. Make sure you have enabled USB Debugging (Not applicable for BL Unlocking and TWRP Flashing)
Uninstall all drivers previously installed on computer(every driver of any device)
Reboot your computer. And then install all drivers given in the driver folder.
If the problem persists, try different computer and different usb cable.
2. Facing permission denied in fastboot mode or while running script files.
Sol. Try disabling your lock screen security to none.
File Credits:
1. RealYoti

Would it not be easier to get the stock raw image and just flash it with the asus flash tool?
Sent from my ASUS_Z00A using Tapatalk

kenbo111 said:
Would it not be easier to get the stock raw image and just flash it with the asus flash tool?
Click to expand...
Click to collapse
Thanks for suggestion. But the reasons​ are
First thing is stock raw image of latest version is very difficult to find.
Second thing sometime asus flash tool stops responding. So you have to wait again for 30 minutes. Also it doesn't show progress sometimes.

Kapil Tapsi said:
Thanks for suggestion. But the reasons​ are
First thing is stock raw image of latest version is very difficult to find.
Second thing sometime asus flash tool stops responding. So you have to wait again for 30 minutes. Also it doesn't show progress sometimes.
Click to expand...
Click to collapse
No offense meant. But the entire collection of raw files are here: https://forum.xda-developers.com/showthread.php?t=3448966
As long as you have the correct drivers (which you need for your process too) the AFT will get the job done in one easy step.
Sent from my ASUS_Z00A using Tapatalk

kenbo111 said:
No offense meant. But the entire collection of raw files are here: https://forum.xda-developers.com/showthread.php?t=3448966
As long as you have the correct drivers (which you need for your process too) the AFT will get the job done in one easy step.
Click to expand...
Click to collapse
It is a guide only. Users are free to choose from where to download. Thats it. I only shared my collection.

E: footer wrong
E: footer wrong
Installation aborted
I need your help!
I follow the instructions in Method 1 but the device give me this error message when I try to update via SD-card...
May I know whats the solution?
Rom used: Fastboot Rom WW-4.21.40.327
Thank you very much!

kenbo111 said:
No offense meant. But the entire collection of raw files are here: https://forum.xda-developers.com/showthread.php?t=3448966
As long as you have the correct drivers (which you need for your process too) the AFT will get the job done in one easy step.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Thanks, finally got it

Hey...when I get to part 6 I get this Error >>
footer is wrong
signature verification failed
installation aborted

Hey..I also Tried Flashing with the method 2 it was installing but i got an error after

Man, this thread saved my ass. thank you for all your time all!

I have the Asus Zenfone 2 ZE551ML with sound issues, (it's only when the phone rings that the speaker works) and I put it into recovery mode to wipe cache/data, but it got stuck while doing that and I forced it off. But now, it's stuck at the Asus Boot logo with the rotating icon underneath.
Please help!!!!

Hello, my 551ml has stock LP, it's rooted with bootloader unlocked and Xposed installed. If I want to install the latest MM with through the raw flashing tool, should I install the MM bootloader first or it is included into the raw file? Thank

just trying to revert back to locked bootloader and stock recovery once I have wiped all data with twrp and go to bootloader how do I actually flash stock rom noob thanks

stevegtrlmk said:
just trying to revert back to locked bootloader and stock recovery once I have wiped all data with twrp and go to bootloader how do I actually flash stock rom noob thanks
Click to expand...
Click to collapse
use asus flash tool

damn my asus flash tool says error flashing image failure.... (remote not allowed to flash this partion)
ow btw i already bricked it cause it only does boot fastboot lol no more android
how do i flash it back again i need to send the phone back to amazon by 18/05 lol i mean i can just send it back and say also that it wouldnt boot cause i tried to reset it to get my touchscreen to work but yeah lol dont want them to refuse my retour

No way to simple flash the stock rom through/keeping twrp in the device, like I do with other Custom Roms?

Ok. humm, in AFT, it recognize my phone. (there is no OS on it), i choose the good model, i choose the good firmware, but i got this error in a box
"Can't open file 'SERIALNUMBER_frp_request_server_log.txt' (error 5:denied access)" i can only press OK
and now the button under "state" is red and under description, it's " check the detected serial number failure (not found the device of "SERIALNUMBER") "
you understand the i've replace the real serial number by SERIALNUMBER in those lines.
Anyone ever had this problem?

euphrodil said:
Ok. humm, in AFT, it recognize my phone. (there is no OS on it), i choose the good model, i choose the good firmware, but i got this error in a box
"Can't open file 'SERIALNUMBER_frp_request_server_log.txt' (error 5:denied access)" i can only press OK
and now the button under "state" is red and under description, it's " check the detected serial number failure (not found the device of "SERIALNUMBER") "
you understand the i've replace the real serial number by SERIALNUMBER in those lines.
Anyone ever had this problem?
Click to expand...
Click to collapse
Try manual flashing then. Not the aft flashing
Sent from my MI MAX 2 using Tapatalk

Kapil Tapsi said:
Try manual flashing then. Not the aft flashing
Sent from my MI MAX 2 using Tapatalk
Click to expand...
Click to collapse
Ok thanks, i'll look for a thread that explain this.

euphrodil said:
Ok thanks, i'll look for a thread that explain this.
Click to expand...
Click to collapse
did you find any?
i want to remove the lineageos and install latest stock LP but i have no clue how to do it

Detailed Upgrade And Downgrade Guide To Android Oreo And Back To Stock OOS Stable

Hello Friends
UPGRADE :
Heres a Step By Step Guide To Install The Latest Version Of Android And Hydrogen Os
For further convenience I have made a video guide.
Pre Requisites :
Backup all your data. (Internal Storage Will Be Wiped)
Make sure you have more than 50% battery.
Windows PC with internet.
Oneoplus USB cable
Steps :
1) Download https://drive.google.com/open?id=0BxSuTgRuPk_WQ1dQd01YTG5Wb1U
2) Extract using winrar only. If you use any other extracting software it wont work.
3) Download and install minimal adb and fastboot on pc https://www.androidfilehost.com/?fid=745425885120698566
4) Unlock the bootloader on your OP3T
5) Power off the device.
6) Go to the extracted folder of the ROM and run msmdownloadtool as a administrator
7) While the phone is off press and hold volume up and connect the phone to PC using usb cable
8) Go to device manager and ensure phone is connected as Qualcomm HS-USB 900E
9) In msmdownloadtool ensure your phone is detected and click on start
10) wait 5 to 7 minutes#
11) Once the tool shows flash completed disconnect the phone from PC and press the power button
12) first boot will take 5 to 10 mins so please wait patiently ( After first boot if you wish to have a unlocked Bl please unlock it now and then proceed to setup the phone as it will erase everything when you unlock BL)
13) Set up the device and uninstall/disable all unwanted chinese apps except market
14) open market and install google play store from there
15) once play store is installed you may choose to disable market app
16) Install this apk https://drive.google.com/file/d/0BxSuTgRuPk_WSnE2TE9GX2xmNTQ/view
17) download all requiered apps from play store and reboot the phone
18) Enjoy stable Android 8.0 on your device
DOWNGRADE (Restore Stock OOS 4.5.0 And Relock Bootloader :
watch this video for easier step by step instructions
Download Links :
Minimal Adb And Fastboot : https://androidfilehost.com/?fid=745425885120698566
Restore Firmware : https://mega.nz/#!Q1YnTTAT!gnLf6NEkSRy7W-WY8J0H2SmJJLzO91-vReKx7B1VVpI
Oxygen Os 4.5.0 : https://drive.google.com/file/d/0Bz_uDPdezFwGYi1EYlJZcDV0YkU/view
1) Backup All Your Data And Make Sure Phone Is Atleast 50% Charged
2) Download All 3 Files From The Links Above
3) Install Minimal Adb And Fastboot
4) Extract Restore Firmware To A Folder On Desktop
5) Go to settings > tap build number 7 times > go back > go to developer options > enable oem unlocking
6) power the device off
7) press and hold vol up + power to enter fastboot mode
8) connect your phone to pc
9) open minimal adb and fastboot and then type fastboot oem unlock
10) highlight yes on your phone using volume up and press power to confirm
11) wait for recovery to erase all data and once the phone boots up power it off
12) open msmdownload tool from the extracted restore firmware folder
13) while the phone is off press and hold the volume p button and connect the phone to pc
14) once detected go to device manager and under ports make sure device is detected as qualcomm HS-USB QLoader 9008
15) Go to msmdownload tool and ensure one of the fields says com device and press start
16) Once the tool says download complete disconnect the phone and press the power button to boot into os.
17) Congratulations you are now on official OOS with Android 6.0.1
18) From here you can choose to install ota and go to OOS 4.5.0 or follow the steps below
19) Once on the home screen copy the oos 4.5.0 file to the phones internal memory
20) power the device off and press and hold vol down and power to enter recovery
21) select english > select install from internal storage > select oos 4.5 zip and confirm install
22) reboot to OOS 4.5.0 with a complete stock experience.
If this thread helped you please press thank and please like share and subscribe to my youtube channel.

Great guide thanks ?

On point no 16 the link is dead. Kindly relink! Thanx a ton for your detailed guide brah!

Both Links Updated And Working Now

Palauv said:
On point no 16 the link is dead. Kindly relink! Thanx a ton for your detailed guide brah!
Click to expand...
Click to collapse
Fixed

xposed work on this ?

mydoom said:
xposed work on this ?
Click to expand...
Click to collapse
Wtf? Xposed nougat still unofficial ( not from rovo )
And someone ask Xposed oreo ?
NO

Droidcore said:
Wtf? Xposed nougat still unofficial ( not from rovo )
And someone ask Xposed oreo
NO
Click to expand...
Click to collapse
Yeah it's unbelievable mate

I am unable to install driver for OP3T, win 7 (32-bit)
tried windows test mode ON/OFF
tried installing drivers shared in the links but could not install drivers
any other suggestion?

Can't download no16 because Google Drive wants to instantly install it. Cleared defaults, Chrome can't open it because reasons. How great...

Maybe a guide on how to get back to Oxygen? It's a bumpy ride.. at least for me..

jbarcus81 said:
Maybe a guide on how to get back to Oxygen? It's a bumpy ride.. at least for me..
Click to expand...
Click to collapse
Guide Coming up Stay Tuned.

Can you please provide link to zip unroot?

How to get root? supersu or magisk?
I hav heard magisk doesn't work.
Plz tell me how to bypass safetynet check using supersu. Thanks in advance.

steps added to revert to complete stock oos 4.5.0 in op

Great job @hypergamer1231 finally!
How's Oreo been running for you?
I had no issues for few days, then one day my phone suddenly powered off, and after that I couldn't do anything, even restore my own TWRP backup.
So I had to go back to MSM tool.
Not sure if I want to go through that again especially when I need my phone the most.
---------- Post added at 04:05 AM ---------- Previous post was at 03:45 AM ----------
Magisk doesn't work yet, only SU.

Hey thank you. I moved back to OOS too but I didn't have any major issues. Its just that my banking app was not working on that ROM.

hypergamer1231 said:
Hey thank you. I moved back to OOS too but I didn't have any major issues. Its just that my banking app was not working on that ROM.
Click to expand...
Click to collapse
Mine too... Stoped working...
Any solutions

The link to download the OOS rom for Android Oreo is not working

Link to Oreo don't work and also nothing shows up in MsmDownloadTool even though it shows up as Qualcomm HS-USB QLoader 9008 in device manager.

[GUIDE] How to root, install TWRP, ROMs and mods on a G3s/G3 beat d722 in 2020?

*After I wrote this whole thing as a DM i figured it might be helpful for a couple of people that are struggeling to root and install a custom recovery on their d722.*
Before we start you will need a PC with internet connection and a USB cable.
If you get stuck or need something about the device you can find it here. It's an XDA thread about the d722, it's mods, roms... : https://forum.xda-developers.com/lg-g3/general/lg-g3s-beat-d722-thread-t3110048
First you will need to flash your phone back to 4.4 kitkat firmware to ensure maximum compatibility (this is the only way my device would root) ( find it here: https://lg-firmwares.com/ (type in your model and download a 4.4 firmware closet to your region, language...)). We will do that with the lg flash tool (find it here: https://lgflash.com/download/) + also install lg drivers if you don't have them already (https://www.lg.com/us/support/help-library/lg-mobile-drivers-and-software-CT10000027-20150179827560).
1. First enable developer options in phone settings by tapping the build number 7 times. Go to the developer options and there tick usb debugging. Than you want to turn you device off. Hold volume up and plug it into you computer. You will get into download mode. On your PC extract and open the lg flash tool. There you will chose your kdz firmware file you downloaded previously and click normal fash. Choose other instead of korean and your preferred language. When you flash it the tool might report an error but just ignore it and wait for the phone to reach 100% download. It will reboot itself when finished. After that you can close the flash tool and continue to the next step.
2. Now you will root your phone. You will do that with lg one click root (found here: https://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951). Download the latest GUI version, install it onto your PC and open it. When your redy plug your phone into the computer (turned on no apps open) and click start. Wait for it to be done. It's normal for it to restart a few times.
3. Now we will instal the custom recovery to be able to flash ROMs. To do that you will need to dowbload this zip file from here and extract it with 7zip (https://forum.xda-developers.com/showpost.php?p=61220755&postcount=100) and install ADB (remeber install folder) (from here: https://forum.xda-developers.com/showthread.php?t=2588979). Paste aboot file into /sdcard folder (or folder of choice with adjusted path in command) ob your phone uding file manager. Than open CMD and type in
cd *path of your folder*
adb shell
su
dd if=/sdcard/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
If you get an error that says there is no aboot file or something similar than you nees to change this command : dd if= *your phones path*/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot For me it was : dd if=/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
4. This should have installed a basic version of TWRP on your phone ane booted into twrp recovery but we will be updating it.
To get into recovery from off state hold volume down + power button until you see the LG logo. Relese both for a split second and hold both down again (volume down + power) until you see an option to factory reset (wont actualy reset anything if you did all steps correctly). Click yes and yes again by using volume and power buttons and you will be booted to TWRP.
Alternative is to go to playstore and download root app that boots you to recovery if you do it often.
This version is quite old and not capable of flashing newer ROMs so we will be flashing an updated version (download it here: https://vasy.ru/TWRP/jagnm/ and rename it to .img if it isnt named like that alredy). Easiest way is to download it to your PC and transfer it via USB if your PC detects the phone while in TWRP. If not boot it up transfer the files and boot back to recovery. Now just flash the .img file and reboot.
5. At this point you have root privilages (super SU) and a custom recovery. Now all theres left to do is to flash ROMs and mods.
You boot to TWRP recovery, connect your phone to the PC and transfer the .zip files you want to flash. Tha you click flash in twrp chose your ROM files and click add more, your GAPPS click add more and the mod (if you want to try it of course). Than you flash them, wair for it to finish and click reboot.
If it takes longer than 15 min+ than you probaboy have a bootloop. To fix it take out the battery put it back in and boot into recovery (volume down + power until LG logo pops up, release for half a second hold again, yes and yes). Try factory reseting (type yes). And than just flash the ROM and boot. If it boots go back to recovery and flash GAPPS and mod and it should normaly boot into android.
If nothing fixes your issue you can alway use the firmware and lgflashtool to go back to default unrooted kitkat or lolipop.
My recomendations:
I personaly use this liniage (14.1) 7.1 ROM as it's still getting updates (I also tried 8.1 but it's buggy, laggy and gapps don't work):
https://forum.xda-developers.com/lg-g3/development/cyanogenmod-14-1-lg-g3s-t3508224
And of course you want google apps to go along with it:
https://opengapps.org/ (pick ARM, android version of ROM (7.1 in this case) and how many preinstalled apps (I use nano))
I also have this mod installed which makes colours of your display a bit better:
http://www.mediafire.com/download/6z9yg1d3gooyz37/Sony_Bravia_3.zip
From here you can also get Exposed framework, root apps like LSpeed to speed up your phone even more, greenfy and amplify to improve battery life. Again every mod for this phone along with overclocking and other mods is or was discussed here at one point so dont be afraid to join the conversation in this thread:
https://forum.xda-developers.com/lg-g3/general/lg-g3s-beat-d722-thread-t3110048
And ofcourse google is your friend if you get into any issues. Hope this helps, typed it on my G3s .

Thanks
---------- Post added at 12:28 PM ---------- Previous post was at 11:44 AM ----------
It would be better for our phone to release an android 9 custom, it would be great. Here is the same phone as our processor and video accelerator. Android 9 would work great on our phone https://4pda.ru/forum/index.php?showtopic=633150&view=findpost&p=36961339

Thanks for the guide!
I bought a G3s D722 cheap off ebay to experiment with. I tried to flash four different kitkat roms many times on 2 computers and each time the phone went into boot loop (start tune and logo over and over) so I flashed the first UK Lollipop on the list and all went fine, there are not UK kitkat roms in the link.
The UK kitkat roms must be different is all I can determine anyone know where I can get one?
The preflash OS was V20e-EUR-XX and now its V20d
Any thoughts or suggestions anyone?
Thanks!

I couldn't get this to work so tried the very easy no PC method in the link and it works great!
LG G3/G3s/G3 Beat telekom,orange or any other operator
Hi everyone, I want to show u how to upgade your LG G3s/beat to adroid 7.1.1 lineage OS. It has taken me some time to find and to gather all needed files but i was succesfull :D So I had my lg running on android 5.1 Lollipop but I had problem...
forum.xda-developers.com