My on5 has been rooted for a while with no problems. I downloaded an app to clean it up like an *****. When my phone died and I tried to turn it back on I got to the Samsung logo and in red words, 'custom Binary blocked by FRP'. I can not get into recovery anymore and I tried to flash a stock rom and twrp back to it but odin Says failed and phone says blocked by FRP'. I have done everything I can think of. Including Samsung kies and samfirm. Nothing. Please help.
Related
Hi guys i need your help urgently!
I notice a week ago that anytime i boot my s6 i get this message that custom Binary blocked by FRP LOCK and the phone wont boot at all.
So i decided to flash a stock firmware 5.1.1. It was able to flash successfully using Odin but the phone is boot loop as
its stuck at samsung logo. I have tried flashing stock recovery and blootware using Odin but i get this same error that custom Binary blocked by FRP LOCK in downloading mode.
Please what do i do to get my phone to boot"? I NEED YOUR HELP ASAP. THANK YOU
fuzybaby said:
Hi guys i need your help urgently!
I notice a week ago that anytime i boot my s6 i get this message that custom Binary blocked by FRP LOCK and the phone wont boot at all.
So i decided to flash a stock firmware 5.1.1. It was able to flash successfully using Odin but the phone is boot loop as
its stuck at samsung logo. I have tried flashing stock recovery and blootware using Odin but i get this same error that custom Binary blocked by FRP LOCK in downloading mode.
Please what do i do to get my phone to boot"? I NEED YOUR HELP ASAP. THANK YOU
Click to expand...
Click to collapse
dont worry, friend
download your stock rom
flash stock rom from odin from download mode
so i rooted my first android device about 6 hours ago went great. how ever i made a rookie mistake and turned off the oem unlock after I was finished now I'm stuck and fear i may have hard bricked my device, i used odin 3 with twrp 3.0.2 and installed the supersu even made backups using both twrp recovery and titanium backup. but when i rebooted my device im stuck in the boot loop with a red message stating custom binary blocked by frp lock. and recovery mode is not accessable, only option is download mode. ok so i tried to go back to the stock rom but i get custom binary(recover) blocked by frp lock. is there a solution here or did i prema brick my phone.
im not new to the modding process i have done a few other devices just never rooted a phone before today.
any ideas on what i should try next
FISBANREGNER said:
so i rooted my first android device about 6 hours ago went great. how ever i made a rookie mistake and turned off the oem unlock after I was finished now I'm stuck and fear i may have hard bricked my device, i used odin 3 with twrp 3.0.2 and installed the supersu even made backups using both twrp recovery and titanium backup. but when i rebooted my device im stuck in the boot loop with a red message stating custom binary blocked by frp lock. and recovery mode is not accessable, only option is download mode. ok so i tried to go back to the stock rom but i get custom binary(recover) blocked by frp lock. is there a solution here or did i prema brick my phone.
im not new to the modding process i have done a few other devices just never rooted a phone before today.
any ideas on what i should try next
Click to expand...
Click to collapse
any help with this would be great im looking for the latest firmware for the sm-g550t1 the rev00 doesnt work because of version mismatch
FISBANREGNER said:
so i rooted my first android device about 6 hours ago went great. how ever i made a rookie mistake and turned off the oem unlock after I was finished now I'm stuck and fear i may have hard bricked my device, i used odin 3 with twrp 3.0.2 and installed the supersu even made backups using both twrp recovery and titanium backup. but when i rebooted my device im stuck in the boot loop with a red message stating custom binary blocked by frp lock. and recovery mode is not accessable, only option is download mode. ok so i tried to go back to the stock rom but i get custom binary(recover) blocked by frp lock. is there a solution here or did i prema brick my phone.
im not new to the modding process i have done a few other devices just never rooted a phone before today.
any ideas on what i should try next
Click to expand...
Click to collapse
ok so i was having an issue where i bricked my metropcs sm-g550t1 (galaxy on5) when i downloaded the stock rom for my phone i would get a sw mismatch D2 B1 error. the reason for this error is the update that came out in the beginning of 2017 changed the firmware version from PF1 to PL1. so if you are also having this problem when trying to unbrick your phone use the firmware for phone SM-G550T2 then use your twrp backup to unbrick but remember to turn the oem unlock on or you will brick your phone again
G935F FRP lock out of nowhere, "Device does not have DRK" after stock firmware flash
Hello. I and my friend have a lot of problems currently with the phone.
The phone had randomly thrown the FRP lock on, and it became unbootable. (gets stuck at logo and would tell that "custom binary locked by frp lock"). The phone previously had stock firmware.
The first fix we've attempted was to flash the stock Oreo firmware (G935FXXU2ERE8) via Odin. But after flashing, It got stuck at bootloader logo without any additional text this time.
Then we've tried to flash an older firmware (G935FXXU2DRC4), and then the phone started throwing the "Device does not have DRK" error.
After booting to recovery, it says "Please flash ENG binary then install DRK".
After reboot via recovery, it started throwing a dm-verity error (0x02).
After some Googling I've found out that It's fixable with a boot file flash. But I couldn't find one for current firmware. Maybe we could just use combination sboot file (pakfirmware.com/2017/11/samsung-frp-samsung-s7-edge-g935f-sboot-combination-file), or should I find one that's specific to the current firmware?
Hello guys,
Lately i had some problems with my charging port on my phone and one day i found my cellphone (it was charging) dead and now it's stuck on Samsung S6 Edge + logo not even on the boot logo and it says CUSTOM BINARY BLOCKED BY FRP. i Cannot access the Recovery only the Download Mode.
I really tried everything i've found on the forums from flashing the latest software(i tried more then 5 different firmwares to flash all of them were stock files downloaded from sammobile) to taking it to the repairing service(Not on warranty) and yet they have not done it. I thought if the NAND erase would help me but i have not tried it yet. On Odin it gave me errors like Bootloader blocked by FRP Lock and even for the cache, radio and custom binary. It gave me even the error SECURE CHECK FAIL for this ones. Is there any other way to unlock the FRP so i'll flash it without problems? I still believe there is something i can do but i ran out of ideas. Help!
P.s: It also shows RP SWREV: B:5 K:0 S:1 idk what it means but i think it has to do with the custom binary.
XhulianoT98 said:
Hello guys,
Lately i had some problems with my charging port on my phone and one day i found my cellphone (it was charging) dead and now it's stuck on Samsung S6 Edge + logo not even on the boot logo and it says CUSTOM BINARY BLOCKED BY FRP. i Cannot access the Recovery only the Download Mode.
I really tried everything i've found on the forums from flashing the latest software(i tried more then 5 different firmwares to flash all of them were stock files downloaded from sammobile) to taking it to the repairing service(Not on warranty) and yet they have not done it. I thought if the NAND erase would help me but i have not tried it yet. On Odin it gave me errors like Bootloader blocked by FRP Lock and even for the cache, radio and custom binary. It gave me even the error SECURE CHECK FAIL for this ones. Is there any other way to unlock the FRP so i'll flash it without problems? I still believe there is something i can do but i ran out of ideas. Help!
Click to expand...
Click to collapse
You can flash combined firmware for your model, then you will be able to unlock it.
El Solido said:
You can flash combined firmware for your model, then you will be able to unlock it.
Click to expand...
Click to collapse
I tried to do that but i cannot find the suitable oneif i'm not wrong because odin gave me the error md5 invalid. If you could help me it would be great.
XhulianoT98 said:
Hello guys,
Lately i had some problems with my charging port on my phone and one day i found my cellphone (it was charging) dead and now it's stuck on Samsung S6 Edge + logo not even on the boot logo and it says CUSTOM BINARY BLOCKED BY FRP. i Cannot access the Recovery only the Download Mode.
I really tried everything i've found on the forums from flashing the latest software(i tried more then 5 different firmwares to flash all of them were stock files downloaded from sammobile) to taking it to the repairing service(Not on warranty) and yet they have not done it. I thought if the NAND erase would help me but i have not tried it yet. On Odin it gave me errors like Bootloader blocked by FRP Lock and even for the cache, radio and custom binary. It gave me even the error SECURE CHECK FAIL for this ones. Is there any other way to unlock the FRP so i'll flash it without problems? I still believe there is something i can do but i ran out of ideas. Help!
P.s: It also shows RP SWREV: B:5 K:0 S:1 idk what it means but i think it has to do with the custom binary.
Click to expand...
Click to collapse
I somehow have managed to get back the recovery but it still won't flash the stock firmware. Any idea what to do next anybody?
So I have a S8 (SM-G950FD Brazilian unlocked) and it freaked out while updating to the latest firmware. It boots to a screen saying "codification failed" (I translated, it may not say that in an English configured device) and asks for a factory reset wich does nothing. I tried flashing the latest firmware with Odin and nothing.
So while researching I came across combination files, so I downloaded the one for the right binary (5) but it spits out the error "custom binary blocked by frp lock" when flashing with Odin and now I'm stuck.
I would post photos with all the device information in both recovery and download mode with the hope it may show something I don't see but unfortunately, I'm a new user and therefore not able to.