Database Users

The absolute way to roll back from 513 and 511 to Lollipop

Hi everyone,
Roll Back from 513 to 331 all credit for @chudy_85 check the link here
http://forum.xda-developers.com/showpost.php?p=65371195&postcount=207
this is the absolute way to roll back from Marshmallow B511 to any previous version whatever it's a lollipop or kitkat.......
(As usual the risk is on your responsibility)
New edit
Working now on MT7-L09
Thx to pasquyx and Shadow_recruit for testing it on MT7-L09
you should have root on the device
Files you may need:
1- Roll back file (this is the trick)- BOTH MODEL
DRIVE
LINK
UPLOADED
LINK
MEGA
LINK
2- rom B326 for middle east
(MT7-TL10)
LINK
(MT7-L09)
LINK
3- oeminfo file for China (don't worry it will not change the iemi numbers)
LINK
3- FX FILE EXPLORER
https://play.google.com/store/apps/details?id=nextapp.fx
4- FX ROOT ADD
https://play.google.com/store/apps/details?id=nextapp.fx.rr
5- Build.prop file if you device model showing Jazz
(MT7-TL10)
https://mega.nz/#!20QXmKrZ!HYhN_7u0sBc445C_6r6D4ug2HuqdCgM_721ANosUa9g
(MT7-L09) *NEED TO TEST FROM ANY ONE TO CONFIRM IF IT WORKING
https://mega.nz/#!XhxR2BpD!O6xkfX8MR55imidxwNlH9p3r2ugLOYwnM-dheTOQT38
-extract the file what you donloaded for oeminfo on ext sdcard
-open fx file explorer and grant it from SU, go to system root and make sure you mount read-write
-copy oeminfo from the extsdcard to /dev/block/platform/hi_mci0/by name and agree for overwrite, after that select the file and choose security and mark for all "read-write-exec"
-copy custom.bin for extsd to /data then choose security and mark for all "read-write-exec"
-check the country info now by *#*#2846579## if it cn, so you are on the right way
-now make a restart but first you should be on official recovery, if you are not turn off the phone open it again on bootloader and flash the official recovery ten restart
-after restart it should make "optimizing"
-after it finish take the roll back and put it in dload on the extsd
-make a local update ( if you don't have it go to dial and type *#*#2846579#*#* and choose 4)
after you make a local update the roll back should complete 100% because this file is the only roll back that compitable with B511
I promise you it will success with 100%
then put lollipop rom 326 on dload and make local update
and again I promise you it will success with 100%
-if the device didn't open after 10 mins, flash all files for the 326 by fastboot
Boot
Cache
Recovery
Cust
System
Userdata
-now you have a 326 rom but chines version.
-make root again and replace oeminfo and custom.bin for middle east version here then make a restart
LINK
final step is to make a reset from settings

Plz M.bleu amber i am asking if we need to unlock bootloader to apply your methode

Prof1977 said:
Plz M.bleu amber i am asking if we need to unlock bootloader to apply your methode
Click to expand...
Click to collapse
Yes, you should have an unlocked bootloader
Sent from my Nexus 5X using Tapatalk

Can you help me ihave trying but no result when i try they tell me that i have t wait 14 day

Prof1977 said:
Can you help me ihave trying but no result when i try they tell me that i have t wait 14 day
Click to expand...
Click to collapse
yes for sure , send to me your mobile details,
device model
iemi 1
S/N
product id

Huawei mt7 l10
Imei:865164220774779
S/n3F0214A23000186
Product id 09502424
---------- Post added at 12:44 AM ---------- Previous post was at 12:43 AM ----------

Prof1977 said:
Huawei mt7 l10
Imei:865164020774772
S/n3F0214A23000186
Product id 09502424
---------- Post added at 12:44 AM ---------- Previous post was at 12:43 AM ----------
Click to expand...
Click to collapse
suspended sorry
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok tkinks no problem

Have anyone tried this on L09?

stepi1 said:
Have anyone tried this on L09?
Click to expand...
Click to collapse
Files here only for TL10
Sent from my Nexus 5X using Tapatalk

Yes, i noticed it. Just downloaded all needed files for L09, i will try later and see what happens.

Tried on l09 but it fails in transition package. downloaded all the files from huawei finnish site. Well, i think i just wait for the complete marshmallow image.
there is something with whatsapp notification, because i don't allways get new message notifications and also usb-debug and hisuite dont work. when i enable usb-debug and connect cable, it won't rise flag about permmisions and computer keeps saying that device is unathorized.

Blue.Ember said:
Hi everyone,
this is the absolute way to roll back from Marshmallow B511 to any previous version whatever it's a lollipop or kitkat.......
(As usual the risk is on your responsibility)
*******This Method is tested only on MT7-TL10 (Please don't try the files on this thread on different model number ********
Files you may need:
1- Roll back from lollipop to Kitkat (this is the trick)
DRIVE
LINK
UPLOADED
LINK
MEGA
LINK
2- for me i tired with kitkat rom B119 sp03
LINK
3- extract all file from B119 Sp03 and be ready to flash all of them via (fastboot)
(so may unlock your bootloader and you should have all files for adb and fastboot)
*recovery
*boot
*cache
*cust
*system
*userdata
it's an easy way, no need to change the location or make any special things \\\\\
download the rollback file which I mentioned before, put it on dload on the extSdcard, and make a local update ( if local update not showing for you try a search for HwOUC.zip and flash it with Twrp recovery)
after you make a local update the roll back should complete 100% because this file is the only roll back that compitable with B511
then put what you want kitkat or lollipop rom ( for me I tried with B119sp03 kitakt and it's fail on 40%)
now enter the bootloader mode and flash all img's for the rom which you tried to flash
after finishing it opne on a stock android, so no issue try a factory reset and everything will be normal after that
Edit (important): to prevent the fail on 5% you should check the location on your device by this code
*#*#2846579#*#*
It should be hw/meafnaf (middle east version)
If it showing "file is not found" try to make a reset from settings>>backup/restore
This is important edit due to the update of B511 is for middle east.....
Click to expand...
Click to collapse
Software install failed after Local Update!

letschky said:
Software install failed after Local Update!
Click to expand...
Click to collapse
It's worked for me anyway, I try again maybe there's a problem with the file, wait for the update.
Sent from my Nexus 5X using Tapatalk

Blue.Ember said:
It's worked for me anyway, I try again maybe there's a problem with the file, wait for the update.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Ok,Thank you,iám waiting

This is stock recovery for mt7-l09 to back from twrp to stock recovery of b326 5.1.1 in order to install MM.
You can flash stock recovery in fast boot mod if you rooted your device or installed twrp previously:
https://www.dropbox.com/s/ke7xc9ugtiz3zmj/root and stock recovery for mt7 lollipop 5.1.1-1.rar?dl=0
Sent from my JAZZ using Tapatalk

I modified the post again you can try now and it will success

help plzz!!
hello guys. how can i flash stock recovery? i downloaded the stock recovery file but i cant flash it on my phone, idont know why!!!plzz guide me hou to flash it and what program i have to use for flash it ?
i did all step that u said in post 1 , but at the last when i wnat to flash rollback i cant becuse i have TWRP and i cdont know how can i flash stock recovey for 511. plz someone guide me tanx

silentflight711 said:
hello guys. how can i flash stock recovery? i downloaded the stock recovery file but i cant flash it on my phone, idont know why!!!plzz guide me hou to flash it and what program i have to use for flash it ?
i did all step that u said in post 1 , but at the last when i wnat to flash rollback i cant becuse i have TWRP and i cdont know how can i flash stock recovey for 511. plz someone guide me tanx
Click to expand...
Click to collapse
You should go into bootloader mode and open the command window from the folder that contain the stock recovery by pressing Sift from keyboard and right bottom in the mouse and choose open command window here, then type the following
fastboot flash recovery xxx.img
Replace "xxx" with the name of the img
If it showing okay then failed
Try to unlock the bootloader again by typing
fastboot oem unlock 0000000000
Replace 00000 with your unlock code
Then try to flash again
Sent from my Nexus 5X using Tapatalk

Blue.Ember said:
You should go into bootloader mode and open the command window from the folder that contain the stock recovery by pressing Sift from keyboard and right bottom in the mouse and choose open command window here, then type the following
fastboot flash recovery xxx.img
Replace "xxx" with the name of the img
If it showing okay then failed
Try to unlock the bootloader again by typing
fastboot oem unlock 0000000000
Replace 00000 with your unlock code
Then try to flash again
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
tanx it solved and recovry stock install. but when i wnat to local update roll back it fail in 5% , and i also cheek the location and it of like this : cn !! so what shuld i do now?

***Edited: Important update*** Anyone managed to ROOT P10+ (VKY-AL00C00)?

Bootloader is open but TWRP is giving ERROR1 when trying to flash Root, and also is unable to mount any partition...
Any help from someone who managed?
***Important Update!*** I am almost sure the problem is with Huawei shipping the P10/P10Plus with different storage chips.
Myself unfortunately got the eMMC chip + LPDDR4 memory. This is why TWRP is unable to mount any partition since the .fstab is different.
I have a working TWRP I ported myself which I was able to rebrand with, root yet to be confirmed. If you need it PM me.
I strongly advise anyone trying to flash TWRP to check their storage chip first using adb command "ls /proc/fs/*".
If you get mmcblk your F******, SD or UFS you are good.

I have an AL00 (rebranded to L29) that I rooted without too much hassle. The key is NOT sliding the first screen in TWRP. You have to click the read only button and then flash the phh nocrypt root zip.

Thanks!
Goronok said:
I have an AL00 (rebranded to L29) that I rooted without too much hassle. The key is NOT sliding the first screen in TWRP. You have to click the read only button and then flash the phh nocrypt root zip.
Click to expand...
Click to collapse
I would kindly appreciate links used and a short walkthrough...sent you a PM.
Thank you so much!

MosquitoByte said:
I would kindly appreciate links used and a short walkthrough...sent you a PM.
Thank you so much!
Click to expand...
Click to collapse
https://www.gizdev.com/root-huawei-p10-p10-plus-install-twrp/
If you follow this guide exactly, you'll be rooted without issues. (you can use their files, they work fine) Two things to watch for :
1. You absolutely cannot slide the first slider in TWRP to allow modifications. You have to click the read only button.
2. It will only work on a fresh install / fresh boot.img. If you've already allowed modifications within TWRP, you're stuck. You have to flash a new boot.img or completely re-install EMUI via update.zip or funkyhuawei.
Hope this helps

Thanks so much for your Info Goronok.
I got the same problem.. No possibility of a full root and system partition is write protected..
One question:
Is ist possible to do a factory reset out of the settings as well?
Or do we have to go for the funkyhuawei method?
How can i update.zip the system if its not possible to make a dload folder in the root folder on system partition?
Can someone uplad the boot.img for VKY-L09C432B130, if that will save the problem too... ?
Ok that wasnt one, that were 4 questions.. but thanks so much in advance
Kind Regards
Dennis

DV87XDA said:
Thanks so much for your Info Goronok.
I got the same problem.. No possibility of a full root and system partition is write protected..
One question:
Is ist possible to do a factory reset out of the settings as well?
Or do we have to go for the funkyhuawei method?
How can i update.zip the system if its not possible to make a dload folder in the root folder on system partition?
Can someone uplad the boot.img for VKY-L09C432B130, if that will save the problem too... ?
Ok that wasnt one, that were 4 questions.. but thanks so much in advance
Kind Regards
Dennis
Click to expand...
Click to collapse
1. No factory reset within the device will help you once you've swiped to allow modifications within TWRP.
2. I did funkyhuawei, so it's the only thing I can speak to. This method will absolutely work assuming you dont mind spending a few dollars and have a router where you can specify DNS.
3. update.zip should (in theory) work from sdcard, though I have not personally tried it. I think most of the people mentioning this method are coming from a P9/Mate9, which does things a little differently.
4. I have not seen a link for VKY-B130 yet, but here is one for B124. The boot.img here should work just the same... http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1475/g104/v82453/f2/full/update.zip

can't figure out what is wrong
First time I tried to root I did slide the "allow modifications"...
I reinstalled stock twice with FunkyHuawei but still can't get TWRP to work.
It seems it doesn't have access to any partition.
Phone boots normally though...
Any ideas?
Please.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://imgur.com/a/nzog4

Hey Mosquito, i guess we both have the same kinda Problem.
I will do the following steps today and let you guys know, if and how it worked out.
The only problem is, im not at home right now, so i dont have access to a router where i can change the DNS. So no FunkyHuawei method for me.
I will do the following steps today:
1. Donwloading the VKY-L09C432B130 jus now. Trying to flash the original boot.img and do the TWRP and root again, WITHOUT swping the TWRP allow modifications slider
2. If No 1 doesnt work i will copy the download update.app, will create a dload folder on my external sd card and copy update.app in it. Then trzing to freshly install the downloaded firmware.
3. If there is somehow a failure or any error with the automated update i will factory reset the phone via settings and then see whtats going on.
I hope everything will work out fine, even without the possibility of FunkyHuawei Reset.
Keep in mind that there are two types of TWRP online available for the P10Plus Version 3.0.2.2 and version 3.1.0.0.. maybe the root works different with the different TWRPs. At this moment im not quite sure which one i use.. probably the one from gizdev, what Goronok told us to use.
I keep you up to date whats going on!
Thanks guys
Regards
Dennis

Been there..
DV87XDA said:
Hey Mosquito, i guess we both have the same kinda Problem.
I will do the following steps today and let you guys know, if and how it worked out.
The only problem is, im not at home right now, so i dont have access to a router where i can change the DNS. So no FunkyHuawei method for me.
I will do the following steps today:
1. Donwloading the VKY-L09C432B130 jus now. Trying to flash the original boot.img and do the TWRP and root again, WITHOUT swping the TWRP allow modifications slider
2. If No 1 doesnt work i will copy the download update.app, will create a dload folder on my external sd card and copy update.app in it. Then trzing to freshly install the downloaded firmware.
3. If there is somehow a failure or any error with the automated update i will factory reset the phone via settings and then see whtats going on.
I hope everything will work out fine, even without the possibility of FunkyHuawei Reset.
Keep in mind that there are two types of TWRP online available for the P10Plus Version 3.0.2.2 and version 3.1.0.0.. maybe the root works different with the different TWRPs. At this moment im not quite sure which one i use.. probably the one from gizdev, what Goronok told us to use.
I keep you up to date whats going on!
Thanks guys
Regards
Dennis
Click to expand...
Click to collapse
I already did everything you wrote, still no go.
Please update me if you get a different result.
Tried both TWRP versions.
What firmware you had at first?

I have bought my phone 10 days ago.
From T-Mobile Germany.
VKY-L09 6GB Version, Single Sim i guess.
Not sure what Firmware i had when i bought it, cause I immediately tried to root after buying, without checking the FW Version.
But I did a FunkyHuawei Restore before with VKY-L09C432B130 Firmware and it worked.
Only the Full Root is the Problem right now.. damnit.
I Will try everything and let you know.
Later!

MosquitoByte said:
First time I tried to root I did slide the "allow modifications"...
I reinstalled stock twice with FunkyHuawei but still can't get TWRP to work.
It seems it doesn't have access to any partition.
Phone boots normally though...
Any ideas?
Please.....
http://imgur.com/a/nzog4
Click to expand...
Click to collapse
What root zip are you trying to flash?

That from gizdev. Superroot.noverity.nocrypt.zip

Hey Guys i made it ! Yesss Thats awesome !
Im doing a Factory Reset now for a clean install of everything. Just because i want a fresh and new phone
Mosquito what Firmware are you on?
Let me know your Firmware Number and i explain what to do..

Ohhh Great
DV87XDA said:
Hey Guys i made it ! Yesss Thats awesome !
Im doing a Factory Reset now for a clean install of everything. Just because i want a fresh and new phone
Mosquito what Firmware are you on?
Let me know your Firmware Number and i explain what to do..
Click to expand...
Click to collapse
I am now reverting to VKY-AL00C00B123 using FunkyHuawei...Please share what to do next

Ok forget my last post.. sorry!
Here is what to do:
Whoever gets the Error 1 Message when installing the SuperRoot_noverity_nocrypt zip, do the follwoing:
Get your Firmware Number, download the whole Firmware (about 2GB +/-) and download the huaweiextractor from here
https://forum.xda-developers.com/showthread.php?t=2433454
Start the Huaweiextractor exe and unpack the boot.img.
Start your phone into bootloader
Flash boot.img (of your original firmware, the one u unpacked just now) to your phone via fastboot flash boot bot.img
Then start your TWRP Recovery
Clear Cache/Dalvik
then install the SuperRoot_noverity_nocrypt, this time you wont get a error
then wipe cache/Dalvik
reboot
enjoy our FUll root on Your P10plus or P10
Best regards
Dennis

DV87XDA said:
Ok forget my last post.. sorry!
Here is what to do:
Whoever gets the Error 1 Message when installing the SuperRoot_noverity_nocrypt zip, do the follwoing:
Get your Firmware Number, download the whole Firmware (about 2GB +/-) and download the huaweiextractor from here
https://forum.xda-developers.com/showthread.php?t=2433454
Start the Huaweiextractor exe and unpack the boot.img.
Start your phone into bootloader
Flash boot.img (of your original firmware, the one u unpacked just now) to your phone via fastboot flash boot bot.img
Then start your TWRP Recovery
Clear Cache/Dalvik
then install the SuperRoot_noverity_nocrypt, this time you wont get a error
then wipe cache/Dalvik
reboot
enjoy our FUll root on Your P10plus or P10
Best regards
Dennis
Click to expand...
Click to collapse
I think I tried that already,
I will try again..
Where did you get your firmware from and what firmware you were on?

I have the Firmware L09C432B130 and i downloaded from here:
http://www.stechguide.com/download-huawei-p10-plus-nougat-firmware-update/
Just google your firmware and downloaded.
You need the exact 100% same boot.img from your installed firmware.
Then it will work for sure!

DV87XDA said:
I have the Firmware L09C432B130 and i downloaded from here:
http://www.stechguide.com/download-huawei-p10-plus-nougat-firmware-update/
Just google your firmware and downloaded.
You need the exact 100% same boot.img from your installed firmware.
Then it will work for sure!
Click to expand...
Click to collapse
Dennis,
Can you please check for me if TWRP mounts partitions correctly for you?
I suspect the problem for me is incompatibility of the available TWRP with the Chinese version, or some sort of data encryption embedded.

MosquitoByte said:
Dennis,
Can you please check for me if TWRP mounts partitions correctly for you?
I suspect the problem for me is incompatibility of the available TWRP with the Chinese version, or some sort of data encryption embedded.
Click to expand...
Click to collapse
Is your device an AL00?

Goronok said:
Is your device an AL00?
Click to expand...
Click to collapse
Yes indeed.

[GUIDE][FRD]360-DEGREES[SOLUTIONS FOR PROBLEMS HONOR 8 USERS USUALLY FACE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS THREAD IS WIP FOREVER
So , while writing this thread, i had a bit of confusion where to start as here am posting as many problems that users normally face which may be related to flashing (before,while and after). So most problems starts up after flashing . since there as a sequence which i wrote before, lets begin with "BEFORE" followed by "WHILE" and "AFTER". This isnt a grammer class so stop holding ur nerves and lets come to the point.​
BEFORE FLASHING :
Mostly People as a few questions related to "How to root" , if he/she got this doubt. So here we begin
Problems we usually face while unlocking a bootloader.
I am New here, plz help me to unlock bootloader
If u wants to unlock bootloader,kindly refer this thread
I am not able to unlock bootloader even after having unlock code, plz help me
well, plz eanble developer options by heading over to settings/about phone and tab on build number for 7 times and fget back to settings followed by developer options and check for oem unlock and plz enable it. Done , now ur code works to unlock ur bootloader from fastboot.
Iam not able to unlock bootloader due to honor site saying "INVALID CREDENTIALS" , "PLEASE ENTER A VALID IMEI/S.NO/MODEL NUMBER"
Well, i am sorry to say u this.
Here we had only two solutions.
1) If u wants to unlock your bootloader for free, plz contact honor support and give them the required info , if they gave u an unlock code then plz use it.
2) This is a paid service . i never used this but heard success from the one's who tried this. Try DC-UNLOCKER
I unlocked bootloader, but twrp wont boot after flashing it.
Check if the FRP status on fastboot is unlocked . If it is locked, then u cant flash anything even on an unlocked bootloader.
AFTER FLASHING
So here u flashed a twrp recovery. Here i see most of them asking a common question
i just installed twrp, flashed LOS ROm but am not able to boot it, stuck at bootanimation, or IS IN BOOTLOOP..
If you are having above questions, then am pretty sure u forgot to install vendor.zip .
if u dont know whats vendor.zip and where to find it. kindly check here and then u go.
i just installed twrp, flashed LOS ROM but am not able to remove encryption.
Plz always install a latest version of twrp , just wipe data,cache, and dalvik/RT cache . flash the rom and gapps(optional) also make a factory reset after flashing so that we can confirm that u are safe side
I flashed an "X" rom , booted and using that since "n" number of days, the battery is draining heavily. Plz help me.
Plz contact the developer of ur rom and provide them proper logs to solve ur issue.
OTHER ISSUES:
MY DEVICE STRUCK ON NRD-TESTKEYS AS BUILD NUMBER AND AM NOT ABLE TO FLASH ANY ROM /CANT UPDATE/...
This is a severe issue,
The reason behind this problem is , U flashed an ota update with twrp and then the flashing is incomplete . just like u flashed an update.zip and not the regional zip.
in order to over come such , all u need to do is reset the version number.
LO4 users plz flash this zip from twrp and then flash ur desired update.app build for LO4.
LO2 users plz flash this zip from twrp and then flash ur desired update.app build for LO2.
L19 users plz flash this zip from twrp. [zip has update.app in it andd flash directly [Thanks to @Venugopalu007 ]
I WANTS TO REBRAND MY HONOR 8 TO CERTAIN VARIANT. HOW TO DO THAT ?
REBRAND TO LO4 ----plz flash this zip from twrp and then flash ur desired update.app build for LO4.
REBRAND TO LO2 ----plz flash this zip from twrp and then flash ur desired update.app build for LO2.
REBRAND TO L19 ----plz flash this zip from twrp. [zip has update.app in it andd flash directly [Thanks to @Venugopalu007 ]
PHONE'S GETTING HOT DURING CAMERA
Long duration usage may heatup camera, close camera or flashlight to avoid heating issue.
I HAVE ISSUE WITH COMPASS , DO I NEED TO RECALIBRATE OR ELSE ANY OTHER ISSUE?
Compass on stock rom is well calibrated. plz make sure if there is something that effects compass in ur surroundings. (magnets, wifi router close to u etc)
SYSTEM UI REBOOTS WHILE NFC IS TURNED ON
That may be an issue with the theme u are using, kindly change ur theme or revert to origioanl theme from themes app.
XDA:DevDB Information
GUIDE, Tool/Utility for the Honor 8
Contributors
gopinaidu77
Version Information
Status: Stable
Stable Release Date: 2017-07-12
Beta Release Date: 2017-07-12
Created 2017-07-12
Last Updated 2017-07-12

Reserved

Reserved

Rommco05 said:
Maybe u can add, don't unlock bootloader before how is OEM disabled becasue after this u can't change OEM
Click to expand...
Click to collapse
I dint understand , please be clear.

Rommco05 said:
Ok,
-start is here > bootloader is locked
In this moment u can change OEM - disable it or enable it
Situation 1:
-OEM is disabled and if u unlock bootloader (with disabled oem), OEM stay always disabled and u can't flash anything
Situation 2:
-OEM is enabled and if u unlock bootloader (with enabled eom), OEM stay always enabled and u can flash what u want
Click to expand...
Click to collapse
Got u bro . Thanks for ur contribution

Wow. This is a huge guide bro. Well done.
Sent from my Honor 8 using XDA Labs

Rommco05 said:
This is developer project?
Click to expand...
Click to collapse
Sort of.
Sent from my Honor 8 using XDA Labs

Ah, if u use CHinese Honor and in EMUI 5.0, u cant Unlock OEM in Developer mode because it doesnt have. Rollback to EMUI 4.1 and go to adb command
adb oem unlocking hit enter
then u go to bootloader to unlock ur device.
Source : https://www.youtube.com/watch?v=9ClbjG0ic4U

Rommco05 said:
Because Chines models don't have this Google security "feature"
edit: probably Chines models too don't have FRP...
Click to expand...
Click to collapse
Yeah probably.

Bro Really great Work bro, 360- Solutions hatsoff!! for you work

venugopalu007 said:
Bro Really great Work bro, 360- Solutions hatsoff!! for you work
Click to expand...
Click to collapse
Hahaha .. u too plz contribute

gopinaidu77 said:
Hahaha .. u too plz contribute
Click to expand...
Click to collapse
I'm always there for you bro, without you, I am nothing :angel:

venugopalu007 said:
I'm always there for you bro, without you, I am nothing :angel:
Click to expand...
Click to collapse
Thanks

MY DEVICE STRUCK ON NRD-TESTKEYS AS BUILD NUMBER AND AM NOT ABLE TO FLASH ANY ROM /CANT UPDATE/...
i flashed the frd-04 file on twrp and now i have a boot loop cant flash from dload because i get the software install failed error

2matos said:
MY DEVICE STRUCK ON NRD-TESTKEYS AS BUILD NUMBER AND AM NOT ABLE TO FLASH ANY ROM /CANT UPDATE/...
i flashed the frd-04 file on twrp and now i have a boot loop cant flash from dload because i get the software install failed error
Click to expand...
Click to collapse
after flashing the frd l04 file do a factory reset and dload once the stock ROM

venugopalu007 said:
after flashing the frd l04 file do a factory reset and dload once the stock ROM
Click to expand...
Click to collapse
What?

gopinaidu77 said:
What?
Click to expand...
Click to collapse
he strucked at honor logo

venugopalu007 said:
he strucked at honor logo
Click to expand...
Click to collapse
What did he do?

gopinaidu77 said:
What did he do?
Click to expand...
Click to collapse
flashing stock firmware

Hi,
I'm facing an issue while trying to going back to EMUI. I have L09C432. Here what I did:
- I was on LOS with lastest TWRP
- I put the rolling back UPDATE.APP (81 Mb) in the dload of my sdcard then reboot with vol+ vol- and power pressed.
- I did the same with the big UPDATE.APP (3,30 Go) from frd-l09c432b120.zip
- Now i'm stuck, I can't do anything. I don't go far then the "you'r device is booting" message.
I tried the unbrick mod with Huawei Multi Tool, everything going fine but it doesn't change anything.
I tried to flash twrp for 4.1, nothing.
Plus I can't turn off my phone.
Any help will be appreciate, thanks in advance!

Restore Mate 9 Pro that doesn't boot up? Please help

I wanted to root the phone, unlocked the bootloader but flashed incorrect TWRP version and it didn't see SuperSU zip file in the memory. Then I decided to give it up, lock the bootloader back and bring the phone to its initial genuine state. However, the "3-button flash method" didn't work. I downloaded FullOTA zip of B225C636 firmware, unzipped it and moved "UPDATE.APP" file to dload folder in the phone. After using the "3-button method" the phone said "Installation package doesn't exist". Then I made a factory reset from phone settings... and got a non-booting device. It goes to eRecovery which asks me if I want to get an update via Wi-Fi but finds nothing. I entered fastboot mode and flashed boot.img, recovery.img and system.img via ADB Run but nothing changed. So now I can only enter fastvoot or eRecovery. How can I restore the phone? Please help, I understand it's all my fault but I am a newbie with Huawei devices as I was using Samsung where it was much easier before.

AxelRage92 said:
I wanted to root the phone, unlocked the bootloader but flashed incorrect TWRP version and it didn't see SuperSU zip file in the memory. Then I decided to give it up, lock the bootloader back and bring the phone to its initial genuine state. However, the "3-button flash method" didn't work. I downloaded FullOTA zip of B225C636 firmware, unzipped it and moved "UPDATE.APP" file to dload folder in the phone. After using the "3-button method" the phone said "Installation package doesn't exist". Then I made a factory reset from phone settings... and got a non-booting device. It goes to eRecovery which asks me if I want to get an update via Wi-Fi but finds nothing. I entered fastboot mode and flashed boot.img, recovery.img and system.img via ADB Run but nothing changed. So now I can only enter fastvoot or eRecovery. How can I restore the phone? Please help, I understand it's all my fault but I am a newbie with Huawei devices as I was using Samsung where it was much easier before.
Click to expand...
Click to collapse
U have to flash back Stock Recovery before u can flash FullOTA. U cant flash stock firmware with TWRP.
Sent from my LON-L29 using XDA Labs

Mostar088 said:
U have to flash back Stock Recovery before u can flash FullOTA. U cant flash stock firmware with TWRP.
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
Thanks, I tried to flash stock recovery back via ADB Run but it didn't work. The phone was still rebooting into eRecovery partition asking to update via Wi-Fi.
I solved the problem in other way, by setting appropriate DNS in the DHCP section on my Wi-Fi router and then pulling clean B225C636 FullOTA to update server with PC version of Huawei Firmware Finder. Then booted into eRecovery and the process started. After flashing I got my stock recovery back and performed wipe data/factory reset. Now the phone works normally with a locked bootloader as I wanted.

AxelRage92 said:
Thanks, I tried to flash stock recovery back via ADB Run but it didn't work. The phone was still rebooting into eRecovery partition asking to update via Wi-Fi.
I solved the problem in other way, by setting appropriate DNS in the DHCP section on my Wi-Fi router and then pulling clean B225C636 FullOTA to update server with PC version of Huawei Firmware Finder. Then booted into eRecovery and the process started. After flashing I got my stock recovery back and performed wipe data/factory reset. Now the phone works normally with a locked bootloader as I wanted.
Click to expand...
Click to collapse
:good:
Sent from my LON-L29 using XDA Labs

I Have the same problem
please help me
I have the same problem
what DNS did you used to fix ??

AxelRage92 said:
Thanks, I tried to flash stock recovery back via ADB Run but it didn't work. The phone was still rebooting into eRecovery partition asking to update via Wi-Fi.
I solved the problem in other way, by setting appropriate DNS in the DHCP section on my Wi-Fi router and then pulling clean B225C636 FullOTA to update server with PC version of Huawei Firmware Finder. Then booted into eRecovery and the process started. After flashing I got my stock recovery back and performed wipe data/factory reset. Now the phone works normally with a locked bootloader as I wanted.
Click to expand...
Click to collapse
Hey Axel,
im in a same boat as you where i cannot access stock recovery and always presented with erecoery asking to update via wifi.
Any chance you can assist and provide further detail on your solution?

heatl0rd said:
Hey Axel,
im in a same boat as you where i cannot access stock recovery and always presented with erecoery asking to update via wifi.
Any chance you can assist and provide further detail on your solution?
Click to expand...
Click to collapse
Hi there,
1) Firstly, you need to install the desktop version of Firmware Finder (download here).
2) Then go to the admin panel of your router, enter DHCP section and put 81.177.139.39 as primary and secondary DNS. Write down your original DNS (if any) to restore it later. Make sure that DHCP is enabled.
3) Run Firmware Finder. Open "Common base" tab, enter your model into search window and copy the link for the desired firmware from "Changelog" (see below). You should select the FullOTA version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4) Click the round button with a cloud on top of Firmware Finder to open ProxyServer window. Paste the URL you've copied from changelog to this window, click "Set" and then "Register for update" (see below).
5) Reboot your phone to stock eRecovery and connect to your Wi-Fi network. The download and installation should start now.
If the phone is stuck on boot logo after completion, boot into standard Recovery (VolUp + Power) and tap "Wipe data/factory reset". Now the phone should boot up.
Don't forget to restore the DNS in your router's settings.
Hope that helps!

AxelRage92 said:
Hi there,
I managed to find another thread that give me the same instructions as you did. But no matter what i do i keep getting package info failed.
I've also paid for funkyhuawei and get the same issue. I know my DNS is correct but dont know why it still fails.
Ideas?
Click to expand...
Click to collapse

heatl0rd said:
AxelRage92 said:
Hi there,
I managed to find another thread that give me the same instructions as you did. But no matter what i do i keep getting package info failed.
I've also paid for funkyhuawei and get the same issue. I know my DNS is correct but dont know why it still fails.
Ideas?
Click to expand...
Click to collapse
Hmm... Looks strange. This is my first Huawei and I didn't face up with the issue you've described so I can't even figure out the reason... I'd like to know what's the problem with your phone too. Which version and region did you choose in FF? Huawei deletes some of them after a while. Also, maybe there are some ports/services blocked by your inet provider or router?
Click to expand...
Click to collapse

AxelRage92 said:
heatl0rd said:
Hmm... Looks strange. This is my first Huawei and I didn't face up with the issue you've described so I can't even figure out the reason... I'd like to know what's the problem with your phone too. Which version and region did you choose in FF? Huawei deletes some of them after a while. Also, maybe there are some ports/services blocked by your inet provider or router?
Click to expand...
Click to collapse
i have a chinese lon-al00, trying to go to l29
i made the mistake of restoring a oeminfo file for a MHA-L29C636 then tried flashing a update.app via dload - realised it didnt work because i put the dload on a usb with OTG connection instead of a ext/int sd (mate 9 pro dosnt have sd)
Then all of a sudden i lost TWRP, FRP and PHONE is now locked.
Cant boot into system, can only access erecovery and stock recovery dosnt exist anymore.
sighs
Click to expand...
Click to collapse

heatl0rd said:
AxelRage92 said:
i have a chinese lon-al00, trying to go to l29
i made the mistake of restoring a oeminfo file for a MHA-L29C636 then tried flashing a update.app via dload - realised it didnt work because i put the dload on a usb with OTG connection instead of a ext/int sd (mate 9 pro dosnt have sd)
Then all of a sudden i lost TWRP, FRP and PHONE is now locked.
Cant boot into system, can only access erecovery and stock recovery dosnt exist anymore.
sighs
Click to expand...
Click to collapse
Oh, you may have corrupted some system data. MHA-L29 is the usual Mate 9, not Pro, and FF seems not to recognize the device you need to restore properly. Maybe you should consider giving the phone to service...
Click to expand...
Click to collapse

AxelRage92 said:
heatl0rd said:
Oh, you may have corrupted some system data. MHA-L29 is the usual Mate 9, not Pro, and FF seems not to recognize the device you need to restore properly. Maybe you should consider giving the phone to service...
Click to expand...
Click to collapse
if i could just get twrp on the phone again i could restore the oeminfo i backed up from the original phone. But fastboot wont let me unlock the phone with the original code.
Click to expand...
Click to collapse

heatl0rd said:
AxelRage92 said:
if i could just get twrp on the phone again i could restore the oeminfo i backed up from the original phone. But fastboot wont let me unlock the phone with the original code.
Click to expand...
Click to collapse
As far as I know, the bootloader unlock code is unique and is stored in "nvme" file located in /dev/block/platform/hi_mci.0/by-name/. Maybe that file was corrupted too or OEM unlock in developer options has gone off.
P.S. The dload (3 buttons) method doesn't work on Android 7 and above. It doesn't matter if you use internal memory or OTG, it will fail eventually. That was one of my mistakes that led to bricking the phone. Never try that again.
Click to expand...
Click to collapse

AxelRage92 said:
ok i managed to get some progress.
I ended up using firmware finder to flash a mha firmware onto my lon phone because i had installed a mha oeminfo.
Im hoping once this works i can somehow flash twrp and restore the original oem i have.
I just hope it will let me unlock the BL. Will report back in a hour or two.
Click to expand...
Click to collapse

heatl0rd said:
AxelRage92 said:
ok i managed to get some progress.
I ended up using firmware finder to flash a mha firmware onto my lon phone because i had installed a mha oeminfo.
Im hoping once this works i can somehow flash twrp and restore the original oem i have.
I just hope it will let me unlock the BL. Will report back in a hour or two.
Click to expand...
Click to collapse
Is there any progress?
Отправлено с моего GT-I9502 через Tapatalk
Click to expand...
Click to collapse

[GLOBAL][EU][ROM]Stock ROM is now available

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Version:RMX1931EX_11.A.06
Release time:14/11/2019
Size:3.06GB
md5:14e2ea74751fd499394263c441f97400
link: sorry I cant post link because of account, pls go to eu realme website -> support -> software update
Is anyone can try Chinese version flash to EU version?

hmmm I may attempt to flash on my x2 pro once it arrives,unless someone else tries and says it fails

link:https://download.c.realme.com/osupdate/RMX1931EX_11_OTA_0060_all_iomsumMA73CO.ozip

Hey Guys how we can install that on chinese rom?
---------- Post added at 03:33 PM ---------- Previous post was at 02:54 PM ----------
I just tried to install it on my x2 pro chinese rom and I followed their method on the website, putting the software on the phone storage and I got installation failed or decompression error message. Anybody know a way?

i got CN version, im gonna try this and hope it will work :fingers-crossed:

realmayar said:
i got CN version, im gonna try this and hope it will work :fingers-crossed:
Click to expand...
Click to collapse
Please keep us informed I'm in the same case

unfortunately i got installation error. i hope somebody finds a way to make it work.

realmayar said:
unfortunately i got installation error. i hope somebody finds a way to make it work.
Click to expand...
Click to collapse
So basically it is not able to install EU rom on a device with CN rom ?

im wondering why the file ends in .ozip vs .zip maybe thats why?
EDIT: I didn't realize that is a oppo specific update extension,so im not sure why it wouldnt work
maybe unlocking bootloader then flashing via recovery will work?

rosztrade said:
So basically it is not able to install EU rom on a device with CN rom ?
Click to expand...
Click to collapse
I would have thought this was expected? The same was the case with the X2. Unless you can fool the recovery somehow in to thinking you're on a global version I would imagine it's unlikely this method would work.
I assume flashing through TWRP with an unlocked bootloader would work but that's not going to work with this proprietary ozip.
I don't think anyone has tried a full twrp system backup and restore from a global phone to a china one though. I'm interested in how that would play out.

Ozip to zip is easy. Done.
BUT, both fastboot flashing and twrp flashing giving errors, because new (EU) system.img and vendor.img is larger than CN versions.
I can go further, try to flash EU recovery and flashing ozip rom. BUT I'm afraid if device is bricked, I don't want to wait for months hoping for a unbrick rom

os_man said:
Ozip to zip is easy. Done.
BUT, both fastboot flashing and twrp flashing giving errors, because new (EU) system.img and vendor.img is larger than CN versions.
I can go further, try to flash EU recovery and flashing ozip rom. BUT I'm afraid if device is bricked, I don't want to wait for months hoping for a unbrick rom
Click to expand...
Click to collapse
so i was able to get rid of the stock launcher , but not being able to use google messages is really crappy. even after deleting the stock messaging app its asking me to login to verify my identity before it will send messages via google messages

os_man said:
Ozip to zip is easy. Done.
BUT, both fastboot flashing and twrp flashing giving errors, because new (EU) system.img and vendor.img is larger than CN versions.
I can go further, try to flash EU recovery and flashing ozip rom. BUT I'm afraid if device is bricked, I don't want to wait for months hoping for a unbrick rom
Click to expand...
Click to collapse
ozip update is normal that means is a oppo realme update even the CN version ends with ''ozip''
But yeah can't install it in ''normal way''
is there a way to unlock the bootloader and intall twrp? I didn't see anything ''official''
Otherwise how to guys?

os_man said:
Ozip to zip is easy. Done.
BUT, both fastboot flashing and twrp flashing giving errors, because new (EU) system.img and vendor.img is larger than CN versions.
I can go further, try to flash EU recovery and flashing ozip rom. BUT I'm afraid if device is bricked, I don't want to wait for months hoping for a unbrick rom
Click to expand...
Click to collapse
1. ozip decrypting
2. compatibility.zip must be delete
3. sign zip and flash (but I think recovery will flash to eu version so it may cause some problem)

henrym1203 said:
ozip update is normal that means is a oppo realme update even the CN version ends with ''ozip''
But yeah can't install it in ''normal way''
is there a way to unlock the bootloader and intall twrp? I didn't see anything ''official''
Otherwise how to guys?
Click to expand...
Click to collapse
"is there a way to unlock the bootloader and intall twrp?"
Are you serious ?

os_man said:
"is there a way to unlock the bootloader and intall twrp?"
Are you serious ?
Click to expand...
Click to collapse
I'm asking if there is an offcial and functional way so yes I'm serious

henrym1203 said:
I'm asking if there is an offcial and functional way so yes I'm serious
Click to expand...
Click to collapse
Hi
I'm in the same situation as you are. Should get my X2 pro these days and am collection information about safe ways to root, because I need my phone as working phone and unfortunately can't take the risk ofbricking the phone or have an unstable installation. As far as I know for shure:
Unlocking bootloader
You need the tool "In-Dept test Tool" on your phone. Read this . You will find a download link there.
Installing TWRP
There is a pre-release version from honorable @mauronofrio. I don't know how big the risk ist to install this. I haven't read anything about people who have experience with this. For instructions read this .
Rooting
Now we are on the tricky point. I have not read anything about succesful rooting. Neither with Magisk nor with SuperSU.
If anyone has additional info or newer info please let me/us know.

Sir Backe said:
Rooting
Now we are on the tricky point. I have not read anything about succesful rooting. Neither with Magisk nor with SuperSU.
If anyone has additional info or newer info please let me/us know.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=80955651&postcount=72

Sir Backe said:
Hi
I'm in the same situation as you are. Should get my X2 pro these days and am collection information about safe ways to root, because I need my phone as working phone and unfortunately can't take the risk ofbricking the phone or have an unstable installation. As far as I know for shure:
Unlocking bootloader
You need the tool "In-Dept test Tool" on your phone. Read this . You will find a download link there.
Installing TWRP
There is a pre-release version from honorable @mauronofrio. I don't know how big the risk ist to install this. I haven't read anything about people who have experience with this. For instructions read this .
Rooting
Now we are on the tricky point. I have not read anything about succesful rooting. Neither with Magisk nor with SuperSU.
If anyone has additional info or newer info please let me/us know.
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...lme-x2-pro-t3997879/post80955651#post80955651

Extracted EU rom to system.img + vendor.img + other partitions. BUT the system.img is 5.1GB, CN version is 4.4GB, same for vendor.img, is bigger. Now both fastboot flashing and twrp flashing are giving errors, that there is no space for flashing.
I need help, is there any way to resize those partitions ? (twrp resize does not work).