Related
Hi people...
Everything was going so smoothly... bootloader unlock... root... some nice root apps... free paid games... and my p8 lite was just feeling so good... until... I flashed twrp with flashify under the name of boot.img... Am I stupid or what?! Now I can only get 2 scenarios... when i turn on the phone it goes directly to twrp. In twrp i get the option to go the bootloader screen... If I choose system it goes back to twrp... I can't get it to start. I downloaded the official tar.gz from emui site but I dont know how can I install it. PLEASE HELP... What should I do in this case?! I miss my baby...
Thanks in advance
You have to restore stock recovery in fastboot mode.
arviit said:
You have to restore stock recovery in fastboot mode.
Click to expand...
Click to collapse
How do I do that?! If I wanted to wipe my phone completely and re-install the OS would be better to do it using twrp or stock recovery?
Thank you very much
Sorry, i misunderstood. If you flashed twrp as boot.img, reflash stock boot in fastboot mode.
flash stock boot.img in fastboot mode
and then flash twrp as recovery
will be like this
fastboot flash boot boot.img
fastboot reboot-bootloader
fastboot flash recovery TWRP.img
fastboot reboot
use the boot.img from stock rom and twrp image you downloaded
Oh no!
Now I made some serious **** to my baby... guess now i'll have to send it to huawei to fix it. I made a full wipe like if it was format c: in computers... everything is gone (i didnt had any personal data) it doesnt have OS even. But when I still had twrp i tried to flash boot.img and recovery.img and now when i start it goes directly to bootloader screen but saying "please update system again" and where it used to say phone unlocked it now says (in red letters):
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
I was able to get to eRecovery with usb connected but when i choose to download e install the new version it gives me the message "wifi starting failed".
It also does not get any instuction with fastboot. but hi suite starts when I connect it. Strange?!
What do you think? Should I send it to huawei? Or is it possible for me to make it work again?
Also tried UPDATE.APP function and all give me fail message.
I'm going crazy!!!! But I love to mess around with android... To me this is the android essence. Fortunately I have a lumia for when my baby doesnt work.loooool
Thank you all
I don't understand why you don't use fastboot. Everybody told you to use it. In our phone situation, without custom kernel or rom, twrp is for experimentation and you cannot mix things.
arviit said:
I don't understand why you don't use fastboot. Everybody told you to use it. In our phone situation, without custom kernel or rom, twrp is for experimentation and you cannot mix things.
Click to expand...
Click to collapse
Well, you warned me... but sometimes i do these kind of *****... So, in this situation you think it's better to send it or is there way to fix this.
By the way, when I enter huawei eRecovery and I get the option to download the firmware through wifi and it says wifi starting failed, is there any way to make this work? And to fastboot do we need to open cmd as administrator to make it work? Because if Hi suite detects the phone I should also be able to fastboot it right?
Thanks for your patience
Just use fastboot aand flash everything
Recovery
Boot
Systme
Cust
jabonloco said:
flash stock boot.img in fastboot mode
and then flash twrp as recovery
will be like this
fastboot flash boot boot.img
fastboot reboot-bootloader
fastboot flash recovery TWRP.img
fastboot reboot
use the boot.img from stock rom and twrp image you downloaded
Click to expand...
Click to collapse
hello I have p8 lite unlocked and rooted, yesterday I wanted to install the TWRP 2.8.7. but I was wrong and I installed twrp for the p8 and not p8 lite.
When I go into recovery mode my phone locks that read huawey, I tried with fastboot command to delete the wrong recovery and install the right of the p8 lite but the result does not change, my phone locks that read huawey
i think The commands that you wrote and that I have quoted are also fine for my case, it's' true?
i have version firmware b133 which boot.img from stock rom?
Try to reflash stock boot.img too.
arviit said:
Try to reflash stock boot.img too.
Click to expand...
Click to collapse
but Ido the extraction of the boot.img from the update version b133?
Hi everyone!!
First of all, thanks to everybody who helped me with this situation.
I now am using my baby again as if it was new. I wiped him completely as i stated before and it was as easy as finding the right firmware (136a) and using the vol down + vol up + power button technique. I put the UPDATE.APP file inside a folder named dload in sdcard using other phone (with my p8 was impossible). After that rebooted the device, pressed those 3 buttons and the instalation started successfully.
I just cant explain how happy i was. I stayed 3 days without it.
After that I have been messing with fastboot so thanks to everyone who made me realize that i didnt need to do all of this, but well, A full wipe is always welcome.
Is there any custom kernel on the way for overclock my baby?
Please explain to me how do I put SOLVED in this thread as my problem is already solved...
Thanks
siul_lasc said:
Hi everyone!!
First of all, thanks to everybody who helped me with this situation.
I now am using my baby again as if it was new. I wiped him completely as i stated before and it was as easy as finding the right firmware (136a) and using the vol down + vol up + power button technique. I put the UPDATE.APP file inside a folder named dload in sdcard using other phone (with my p8 was impossible). After that rebooted the device, pressed those 3 buttons and the instalation started successfully.
I just cant explain how happy i was. I stayed 3 days without it.
After that I have been messing with fastboot so thanks to everyone who made me realize that i didnt need to do all of this, but well, A full wipe is always welcome.
Is there any custom kernel on the way for overclock my baby?
Click to expand...
Click to collapse
I also have same problem. Now i am going to try this. thank you very much.
---------- Post added at 02:22 PM ---------- Previous post was at 01:53 PM ----------
siul_lasc said:
Hi everyone!!
First of all, thanks to everybody who helped me with this situation.
I now am using my baby again as if it was new. I wiped him completely as i stated before and it was as easy as finding the right firmware (136a) and using the vol down + vol up + power button technique. I put the UPDATE.APP file inside a folder named dload in sdcard using other phone (with my p8 was impossible). After that rebooted the device, pressed those 3 buttons and the instalation started successfully.
I just cant explain how happy i was. I stayed 3 days without it.
After that I have been messing with fastboot so thanks to everyone who made me realize that i didnt need to do all of this, but well, A full wipe is always welcome.
Is there any custom kernel on the way for overclock my baby?
Click to expand...
Click to collapse
Yeah finally my phone is working now thanks to you I searched many treads and forums but i cant find a solution. But finally i got an easy solution Thank you again bro.. Good Luck !!!:good::good::good::good::good::good::good:
Just download your firmware version, use huawei extractor to extract boot.img,cust.img,recovery.img and system.img
After that,download mininal adb fastboot copy you files into fastboot folder , enter fastboot mode on your phone and from fastboot folder,open cmd and type these commands:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
After this your phone will boot normally. Once you've done this, copy update.app to your sdcard or internal and install it by local update. Once you've done all this,your phone is fine.
May I know how do you wipe your internal storage? and what if after wiping, im unable to get into recovery mode? does it mean phone is not usable anymore?
SOLUTION
Hello. I'm the bigest mess on androids but i know that flashing stock recovery can remove any TWRP/CWR. If its too powerfull flash stock boot and run fastboot -w.(fastboot -w erases all PERSONAL data)
Guys Help me in this
guys help me
http://forum.xda-developers.com/honor-7/help/stock-emui-recovery-image-lost-twrp-t3442021
thank you !!
VladHD said:
Just download your firmware version, use huawei extractor to extract boot.img,cust.img,recovery.img and system.img
After that,download mininal adb fastboot copy you files into fastboot folder , enter fastboot mode on your phone and from fastboot folder,open cmd and type these commands:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
After this your phone will boot normally. Once you've done this, copy update.app to your sdcard or internal and install it by local update. Once you've done all this,your phone is fine.
Click to expand...
Click to collapse
After days of searching the internet i couldnt find any working solution. then i tried the local update without flashing al those .img's. ( didnt work )
Now after flashing al those .img's my phone works again but its a whole different phone. Only problem is when i try to update him with the update.app file it won't go any further then 5%.
If you know why this happens let me know
Further i wanna thank you one last time .. thank you
I've G7-L11 Running Lollipop 5.1.1 - And its root is hell to me.
No recovery img in google works.. cuz latest twrp 2.8.7 and CWM are made for L01 and L00 NOT L11, thus my firmware kernal rejects the recovery and i got this message when trying to flash or directly boot the recovery img (Failed adb not found)
all fastboot boot twrp.img or fastboot flash recovery twrp.img or any command concerned or related to that issue doesnt work at all.
so please could any one find or build custom recovery for that model G7-L11 Lollipop?
Can any one who has G7-L11 or who is expert help me to get a working recovery?
am sorry brother you had to go through this, i went thru this, but i think i might have found a fix,. there is no custom recovery that works with huawei G7-L11 lollipop, what you need to do is first download the firmware for your phone, the lollipop firmware in order to extract the recovery file, that "UPADATE.APP" file, then download huawei firmaware extractor from
here "http://fs1.d-h.st/download/00173/wwfQ/HuaweiUpdateExtractor_0.9.9.3.zip"
then extract the files, (if you get stack on how to use it, there are videos on youtube to use it), (Extract Zip with any exctractor then, extract UPDATE.APP with huawei file extractor
Then u need a ADB files, i found using CMD directly very confusing, so download this "https://mega.nz/#!eVx3DKyC!9iI9QwvqTXJtqmfGEExC3S2XMfxWewNezQZWy_7gUz0" its a philwood touch file but it has the necessary files we need, what we are trying to do here is to restore the phone original recovery and flash the update from the exSD Card,.
After you have download the Philwood Touch file(this is a normal zip file) extract the files and inside you will find the recovery img file, just replace this with the one you extracted from UPDATE.APP. so that the philzwood folder will have the original recovery which comes with the update and the one that is usually found in the phone,
Then put your phone in the Fastboot and recovery by holding volume down and power button together, then from the Philzwood recovery first run"adb-windows" then "Fastboot windows" then "Install windows, after you have done this you will have your recovery(Orignal Recovery),
Turn off your phone, Then take the UPDATE.APP transfer the file to ExSD Card(External Memory Card) put it in a phone ( Copy the whole dload file), Now hold both Volume up and down and power button until your phone boot up dnt let go until you see a phone installing from SDCARD Just sit back relax after its done your phone will as good as new, i hope u get this right,.
If the download link for Philzwood doesnt work https://www.youtube.com/watch?v=AHe68zH4jgA there are link down at the description
Or search this in google "PHILZ-TOUCH-6.59-G7-buid-21-02-2015"
Deal All
I have G7 -L11 of Huawei ascend, it's front class broken but working. Can anyone help me to find out the same. In Delhi service center it is not available.
Hi I'm sorry if this is in the wrong place please direct me to where to go if it is.
My problem is I have a Huawei p8 with no os on it what so ever it has twrp and that's it. I have spent hours trying to read and find a working stock or even custom rom for the phone. The only ROM that seems to be able to be flashed is from fromFuture but when I flashed it through twrp it said success and then was still in boot loop. I really don't know what to do please help. Thank you
painterdannz said:
Hi I'm sorry if this is in the wrong place please direct me to where to go if it is.
My problem is I have a Huawei p8 with no os on it what so ever it has twrp and that's it. I have spent hours trying to read and find a working stock or even custom rom for the phone. The only ROM that seems to be able to be flashed is from fromFuture but when I flashed it through twrp it said success and then was still in boot loop. I really don't know what to do please help. Thank you
Click to expand...
Click to collapse
You need the masrhmallow bootloader for flash from furure ROM .
Forgive my English too, if I understood well the problem is you can not boot your operating system.Download the official rom and extract the boot and system images of the update.app.?*
Huawei update extractor?*http://forum.xda-developers.com/show...php?t=2433454.?*Once you have boot.img and recovery.img Download adb minimal and fastboot and universal drivers adb. In the folder where is adb minimal and fastboot copy boot.img and system.img.
Start the adb minimal, connect the USB cable to your computer, press volume down and connect the cable,or volumen down and power, so your phone will enter fastboot mode.
In the Command window of minimal adb type the following:?*
fastboot devices and pressing enter to ensure that recognizes your phone.?*
Fastboot flash boot boot.img and pressing enter.
Fastboot flash system system.img and pressing enter this takes more time.
For end ; fastboot reboot.
I'm stuck in an infinite eRecovery loop. No matter what I try or what I do I can't get the phone to boot back into the OS. Anyone have any tips or tricks? Huawei is going to do an rma for me but I'm flying out on business for 2 weeks and really need this phone with me. It's an MLA-L03 that is oem unlocked (which is what I'm thinking is causing me the most issues as I can't do the normal button presses to get to certain things but I can't relock it as it says it can't be trusted or whatever)
I did manage to get to a point where I have full access to /data/ but no matter what rom I try to flash it fails with failing to mount /cust/
If I put an update.app it will get to 5% and hang until it fails when I do the button press to force an update. I cannot get to the emui factory reset screen.
PS, yes I know I'm a dumbass, so be gentle lol. I'm really desperate and have nothing to lose at this point so will to try anything.
I did try everything here with no luck (other than getting full access to /data/ lol):
https://forum.xda-developers.com/nova-plus/help/help-nova-plus-mla-l03-bricked-t3573234
Im not a pro either but,have you try to recover phone via HiSuite ?
in hisuite,main screen,bottom right tab...
I did try that but it says my phone is not compatible (or something to that effect).
rednekcowboy said:
I did try that but it says my phone is not compatible (or something to that effect).
Click to expand...
Click to collapse
sadly,i cant help more...i did not installed that erecovery thing/unlocked or rooted my device so.....
hope someone will join to help you
the erecovery thing is a huwaei emui feature, not something I installed but thanks anyways for the suggestion.
rednekcowboy said:
the erecovery thing is a huwaei emui feature, not something I installed but thanks anyways for the suggestion.
Click to expand...
Click to collapse
my bad hehehe...i wanted to say the twrp :silly:
Ok so you'll have to flash firmware with fastboot.
You need to download and install fastboot, firmware finder and huawei extract tool.
https://forum.xda-developers.com/showthread.php?t=2588979 (fastboot), https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 (firmware finder), https://forum.xda-developers.com/showthread.php?t=2433454 (huawei extract tool).
So install adb and fastboot, extract firmware finder and huawei extract tool. Open firmware finder hit common base, on model for find enter mla-l03 and download a full ota, form firmware you just downloaded extract update.app. Now open huawei extract tool and load your update.app you've just extracted and extract from there boot.img, recovery.img and system.img by using the right click (extract them on the same folder where is located fastboot, for example I got fastboot installed on local C/adb).
If you have twrp installed boot in fastboot mode by using twrp, if not you can boot in fastboot mode with the phone turned off by pressing volume - while plugging the usb cable.
Open cmd and write cd /adb (between cd and / is space) and hit enter than write fastboot flash boot BOOT.IMG and hit enter, fastboot flash recovery RECOVERY.IMG and hit enter, fastboot flash system SYSTEM.IMG and hit enter, after finally writing the system write fastboot reboot and hit enter and wait till phone reboots.
Thanks, I've done all that already and it did not fix it but will try again once I get home.
mArIuS% said:
Ok so you'll have to flash firmware with fastboot.
You need to download and install fastboot, firmware finder and huawei extract tool.
https://forum.xda-developers.com/showthread.php?t=2588979 (fastboot), https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 (firmware finder), https://forum.xda-developers.com/showthread.php?t=2433454 (huawei extract tool).
So install adb and fastboot, extract firmware finder and huawei extract tool. Open firmware finder hit common base, on model for find enter mla-l03 and download a full ota, form firmware you just downloaded extract update.app. Now open huawei extract tool and load your update.app you've just extracted and extract from there boot.img, recovery.img and system.img by using the right click (extract them on the same folder where is located fastboot, for example I got fastboot installed on local C/adb).
If you have twrp installed boot in fastboot mode by using twrp, if not you can boot in fastboot mode with the phone turned off by pressing volume - while plugging the usb cable.
Open cmd and write cd /adb (between cd and / is space) and hit enter than write fastboot flash boot BOOT.IMG and hit enter, fastboot flash recovery RECOVERY.IMG and hit enter, fastboot flash system SYSTEM.IMG and hit enter, after finally writing the system write fastboot reboot and hit enter and wait till phone reboots.
Click to expand...
Click to collapse
Really?
I got my phone in the same state and was the only method witch helped me.
Did you successfully flashed boot, recovery and system and still not working? phone get stuck on the huawei logo? After you flash them, boot into recovery and do a factory reset and wipe cache.
yup, everything flashed successfully. I can't get into the recovery to do a factory reset. I have 4 options at my disposal:
1. fastboot
2. Huawei eRecovery
3. TWRP
4. force update where it always fails at 5%
I think the biggest thing that is screwing me is the fact that it's unlocked and I can't relock it. I'm almost 100% positive if I could relock it, I would have no issues with it.
And woh do you boot into twrp? Since you can boot into twrp you must be able to boot in stock recovery. Use huawei multi tool by black team too go into recovery.
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
rednekcowboy said:
yup, everything flashed successfully. I can't get into the recovery to do a factory reset. I have 4 options at my disposal:
1. fastboot
2. Huawei eRecovery
3. TWRP
4. force update where it always fails at 5%
I think the biggest thing that is screwing me is the fact that it's unlocked and I can't relock it. I'm almost 100% positive if I could relock it, I would have no issues with it.
Click to expand...
Click to collapse
I got the bootloader unlocked too, and it's working via fastboot....
Huawei multi tool have the option to relock the bootloader.
mArIuS% said:
And woh do you boot into twrp? Since you can boot into twrp you must be able to boot in stock recovery. Use huawei multi tool by black team too go into recovery.
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
I got the bootloader unlocked too, and it's working via fastboot....
Huawei multi tool have the option to relock the bootloader.
Click to expand...
Click to collapse
Thanks I'll try that.
It's weird. I flash TWRP, do what I need to do, then reflash the recovery.img. However it just does a continuous loop to eRecovery when I do that unless I try to force it to update.
I'll try using the fastboot that you linked to and see if that makes a difference. Right now I'm using the minimal adb and fastboot install.
EDIT: Same result when trying to relock the bootloader--device cannot be trusted.
EDIT2: Do you have the cust.img file? None of the firmwares I've downloaded has it in it.
rednekcowboy said:
Thanks I'll try that.
It's weird. I flash TWRP, do what I need to do, then reflash the recovery.img. However it just does a continuous loop to eRecovery when I do that unless I try to force it to update.
I'll try using the fastboot that you linked to and see if that makes a difference. Right now I'm using the minimal adb and fastboot install.
EDIT: Same result when trying to relock the bootloader--device cannot be trusted.
EDIT2: Do you have the cust.img file? None of the firmwares I've downloaded has it in it.
Click to expand...
Click to collapse
I have a cust.img but is for can-l01...and won't help you.
Sorry i'm out ideas.
mArIuS% said:
I have a cust.img but is for can-l01...and won't help you.
Sorry i'm out ideas.
Click to expand...
Click to collapse
When your device reboots and you get to the warning screen about your device being unlocked, what buttons do you press to get into the normal (ie not eRecovery) recovery where you can do a factory reset? When I have TWRP installed, I have to hold volume + and volume - at the same time to go into TWRP. If I do the same thing after I reflash recovery.img, then it goes straight into the forced update which stalls and fails at 5%. Volume - reboots and goes back to fastboot. Volume + takes me to eRecovery. Doing nothing, the phone reboots and goes to eRocovery on the reboot. Holding down all 3 buttons also goes to the forced update screen.
I'm assuming that I'm missing something super simple and stupid so I'm going to go over everything again, step by step very carefully.
rednekcowboy said:
When your device reboots and you get to the warning screen about your device being unlocked, what buttons do you press to get into the normal (ie not eRecovery) recovery where you can do a factory reset? When I have TWRP installed, I have to hold volume + and volume - at the same time to go into TWRP. If I do the same thing after I reflash recovery.img, then it goes straight into the forced update which stalls and fails at 5%. Volume - reboots and goes back to fastboot. Volume + takes me to eRecovery. Doing nothing, the phone reboots and goes to eRocovery on the reboot.
I'm assuming that I'm missing something super simple and stupid so I'm going to go over everything again, step by step very carefully.
Click to expand...
Click to collapse
To enter in normal recovery you have to press and hold at the same time volume - and power button.
mArIuS% said:
To enter in normal recovery you have to press and hold at the same time volume - and power button.
Click to expand...
Click to collapse
That just reboots me and then puts me in fastboot unfortunately. I'm going to try loading twrp and removing anything in /dload/ and see if it will boot to normal recovery. Last time I checked there was an update.app file there so maybe it's just bypassing recovery and trying to install that.
rednekcowboy said:
That just reboots me and then puts me in fastboot unfortunately. I'm going to try loading twrp and removing anything in /dload/ and see if it will boot to normal recovery. Last time I checked there was an update.app file there so maybe it's just bypassing recovery and trying to install that.
Click to expand...
Click to collapse
Sorry it is volume up + and power button
And that brings me to eRecovery
mArIuS% said:
Sorry it is volume up + and power button
Click to expand...
Click to collapse
I'm driving and it's a bit hard to write did you tried another recovery? You can flsh twrp, put the stock recovery on sdcard, boot into twrp and flash recovery from there and reboot phone from twrp into recovery....
No worries, I really appreciate all the help. Now stop texting and driving. Your life is more important than my phone!!
i recently tried to downgrade my Mediapad M3 (btv-w09), but somehow screwed up...
1. rebooted in twrp and formatted system, data, cache, internal
2. i downgraded to emui 4 dload method it worked and i booted to fastmode and installed wrong twrp
3. stupidly i also relocked the bootloader
4. finnaly im stucked in a bootloop and cant enter recovery, erecovery or fastboot and not even dlload
i get 2 bootloop screens
one where you have the 3 options and one where it just saying device will boot...
maybe anyone knows how to unbrick!?
thx
yes.... you need same tools...
solved my problem
my problem was that i wanted to try the dload method, so i drained the battery but after that i could not recharge it because the tablet first boot then starts to charge and for the dload you need at least 10% .....
the solution (should work for all Huawei devices) :
---------------------------------------------------------------
1. If you have enough battery but cant boot to fastboot by pressing volume down + power button
- press volume down and plug the charging cable (which should be connected to your pc, not charger!!!)
2.If you have dont enough battery
- press volume up and plug the charging cable (which should be connected with the pc)....this will prevent a boot and let you charge your device, to try the dload method
to enter dload :
--------------------
1. from your tablet type ()()2846579()() in your calculator (landscape mode)
2. turned off tablet (bricked): volume up + volume down + power button
Some Links for those who wants to downgrade their M3 to EMUI4:
------------------------------------------------------------------------
- Rollback files can be found here:
https://consumer.huawei.com/it/support/tablets/mediapad-m3-8/
- TWRP
https://androidfilehost.com/?w=files&flid=125388
be carefull for EMUI4 only download twrp_BTV-W09_greatslon or twrp_BTV-DL09_greatslon.img (twrp_BTV-DL09_5_greatslon.img & twrp_BTV-W09_5_greatslon.img are just for EMUI5 )
- Root
Magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
SuperSU for EMUI4 : https://androidfilehost.com/?fid=962187416754458671
PS: EMUI4 is 1000x better then EMUI5 for the M3
Great post. Wish it had appeared much earlier.
I screwed up and tried to use the downgrade-to-Marshmallow packages whilst already in Marshmallow, thus soft-bricking the M3.
https://forum.xda-developers.com/mediapad-m3/help/m3-apsabnormal-bricked-t3779100
“Volume Up + Volume Down and Power Button” method no longer works. The machine no longer boots into Android.
Are the partitions and e-recovery damaged and there is no way to flash the M3 now?
Any suggestions welcome!
Thanks.
sam10000 said:
Great post. Wish it had appeared much earlier.
I screwed up and tried to use the downgrade-to-Marshmallow packages whilst already in Marshmallow, thus soft-bricking the M3.
https://forum.xda-developers.com/mediapad-m3/help/m3-apsabnormal-bricked-t3779100
“Volume Up + Volume Down and Power Button” method no longer works. The machine no longer boots into Android.
Are the partitions and e-recovery damaged and there is no way to flash the M3 now?
Any suggestions welcome!
Thanks.
Click to expand...
Click to collapse
No dont think that your devices is bricked, had the same problem and it worked out for me !!!
if you can boot into fastboot :
------------------------------------------
1. download rollback files & extract the dload on your desktop
2. download Huawei Update Extractor [UPDATED: v0.9.9.5]
https://forum.xda-developers.com/showthread.php?t=2433454
3. watch the how to use video
https://www.youtube.com/watch?v=XAtoaL6i_i0
4. extract thise .img files
- BOOT.img
- CUST.img
- RECOVERY.img
- RECOVERY2.img
- SYSTEM.img
5. flash those files zsing this commands
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash recovery2 RECOVERY2.img
fastboot flash system SYSTEM.img
fastboot reboot
if you can't boot into fastboot :
-----------------------------------------------
- press volume up and plug the charging cable (which should be connected to a pc)....this will prevent a boot and let you charge your device and wait till your tablet charges and it will boot into erecovery then try online download or the dload method
good luck
lukanz said:
No dont think that your devices is bricked, had the same problem and it worked out for me !!!
if you can boot into fastboot :
------------------------------------------
1. download rollback files & extract the dload on your desktop
2. download Huawei Update Extractor [UPDATED: v0.9.9.5]
https://forum.xda-developers.com/showthread.php?t=2433454
3. watch the how to use video
https://www.youtube.com/watch?v=XAtoaL6i_i0
4. extract thise .img files
- BOOT.img
- CUST.img
- RECOVERY.img
- RECOVERY2.img
- SYSTEM.img
5. flash those files zsing this commands
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash recovery2 RECOVERY2.img
fastboot flash system SYSTEM.img
fastboot reboot
if you can't boot into fastboot :
-----------------------------------------------
- press volume up and plug the charging cable (which should be connected to a pc)....this will prevent a boot and let you charge your device and wait till your tablet charges and it will boot into erecovery then try online download or the dload method
good luck
Click to expand...
Click to collapse
Many thanks for your encouraging reply.
However, I am not sure I can flash
*****5. flash those files zsing this commands
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash recovery2 RECOVERY2.img
fastboot flash system SYSTEM.img
fastboot reboot*****
because my M3 has a locked bootloader (the bootloader has never been unlocked), did not have USB debugging selected, has never been rooted, and no TWRP installed.
Anyway, if I can get into fastboot mode, I'll give method (1) a try. Should I connect the M3 to a PC and use ADB to flash?
Thanks again.
lukanz said:
solved my problem
PS: EMUI4 is 1000x better then EMUI5 for the M3
Click to expand...
Click to collapse
In what ways is EMUI 4 better for the M3, if I may ask? Thanks.
sam10000 said:
In what ways is EMUI 4 better for the M3, if I may ask? Thanks.
Click to expand...
Click to collapse
its just my opinion, but if feel snappier, battery is also better i think...
sam10000 said:
Many thanks for your encouraging reply.
However, I am not sure I can flash
*****5. flash those files zsing this commands
fastboot flash boot BOOT.img
fastboot flash cust CUST.img
fastboot flash recovery RECOVERY.img
fastboot flash recovery2 RECOVERY2.img
fastboot flash system SYSTEM.img
fastboot reboot*****
because my M3 has a locked bootloader (the bootloader has never been unlocked), did not have USB debugging selected, has never been rooted, and no TWRP installed.
Anyway, if I can get into fastboot mode, I'll give method (1) a try. Should I connect the M3 to a PC and use ADB to flash?
Thanks again.
Click to expand...
Click to collapse
Sam10000 - wondering if this resolved your problem? I'm in the same boat, although it looks like the rollback files are no longer available for download.
Sorry wrong forum. I already edited message and post it other place. Please remove this.