Database Users

Best nougat Rom , With ColorOS Camera.

Hello friends, I have been looking for some rom with the possibility of using ColorOS camera with its plugins.
I have been watching and reading several posts where some roms are discussed, where you can use ColorOS camera.
I would like to know if you know some Rom Nougat with good development where you can use it.
I currently have cm14.1 25/12 the last update and the camera works partially, the plugins do not
Thank you very much
Sorry for my english (google translate (K))

I tried on Nitrogen Os,got fc.
I hope someone who tried on other N ROMs could help us.

Also on Resurrection Remix
Camera open and no problem but plugins can't work
On Omni Rom they said it's support ColorOs but I didn't try it yet

try Darkobas 7.1.1 it has color os cam
link : here

ColorOS camera sadly does not work perfectly with Nougat.
I use-
[ROM][OFFICIAL][7.1.1_r6][BACON][OPTIMIZED]RESURRECTION REMIX [5.8.0]
&
[UPDATE][MOD]CameraNextMod[Based on Cyanogen OS 13 CameraNext](Denoise Feature)

RazerSharp said:
ColorOS camera sadly does not work perfectly with Nougat.
I use-
[ROM][OFFICIAL][7.1.1_r6][BACON][OPTIMIZED]RESURRECTION REMIX [5.8.0]
&
[UPDATE][MOD]CameraNextMod[Based on Cyanogen OS 13 CameraNext](Denoise Feature)
Click to expand...
Click to collapse
who told you coloros not working with nougat, 
 @Nachowskyz use Darkobas 7.1.1 no issues with coloros cam

ashutoshmn said:
who told you coloros not working with nougat,
@Nachowskyz use Darkobas 7.1.1 no issues with coloros cam
Click to expand...
Click to collapse
Coloros works but the plugins don't

RazerSharp said:
Coloros works but the plugins don't
Click to expand...
Click to collapse
50MP plugin doesn't work, but rest others work as they should.

RazerSharp said:
ColorOS camera sadly does not work perfectly with Nougat.
I use-
[ROM][OFFICIAL][7.1.1_r6][BACON][OPTIMIZED]RESURRECTION REMIX [5.8.0]
&
[UPDATE][MOD]CameraNextMod[Based on Cyanogen OS 13 CameraNext](Denoise Feature)
Click to expand...
Click to collapse
Do you use it as a daily driver? I'm backing everyting up to make the switch from CM due to obvious reasons but I want to make sure I'm picking the most stable rom out there that's also 7.1

Currently using Nitrogen OS (2017/01/08), 4.0.1.c7-00013 firmware, reporting zero issues with ColorOS 2.67+camera+change.zip flash. I do not flash the CM_HAL_MOD.zip.
Hope that helps!

codebluechris said:
Currently using Nitrogen OS (2017/01/08), 4.0.1.c7-00013 firmware, reporting zero issues with ColorOS 2.67+camera+change.zip flash. I do not flash the CM_HAL_MOD.zip.
Hope that helps!
Click to expand...
Click to collapse
What's change.zip? Where can I find this file?
Inviato dal mio A0001 utilizzando Tapatalk

The thing I have experienced is the front camera doesn't work in the roms I've been trying.

Confucio1986 said:
What's change.zip? Where can I find this file?
Inviato dal mio A0001 utilizzando Tapatalk
Click to expand...
Click to collapse
Sorry for the confusion - I was referring to a single zip file:
https://www.androidfilehost.com/?fid=24533103863141887

lsk91 said:
Do you use it as a daily driver? I'm backing everyting up to make the switch from CM due to obvious reasons but I want to make sure I'm picking the most stable rom out there that's also 7.1
Click to expand...
Click to collapse
Yeah everything works, I am using it for 40 days

RazerSharp said:
Yeah everything works, I am using it for 40 days
Click to expand...
Click to collapse
Ok one more question. When I flash the rom, will it be pre-rooted, or will it give me the option to do so. I personally don't want a active root on it due to certain apps I use that automatically don't work if the phone is rooted.

lsk91 said:
Ok one more question. When I flash the rom, will it be pre-rooted, or will it give me the option to do so. I personally don't want a active root on it due to certain apps I use that automatically don't work if the phone is rooted.
Click to expand...
Click to collapse
Its is pre rooted but you can use this to stop root-
iSu

RazerSharp said:
Its is pre rooted but you can use this to stop root-
iSu
Click to expand...
Click to collapse
Sorry but probably last question. Which GAPPS should I go for to also get full functionality like the Google assistant and such. So far I tried flashing the ARM Stock but it seems to get an error and not install. Something about insufficient storage in the System Partition.

lsk91 said:
Sorry but probably last question. Which GAPPS should I go for to also get full functionality like the Google assistant and such. So far I tried flashing the ARM Stock but it seems to get an error and not install. Something about insufficient storage in the System Partition.
Click to expand...
Click to collapse
Mini is the maximum size of Gapps I guess supported by this ROM. After flashing just install 'get assistant' app from play store for Google assistant, I think in the next build the ROM has out of box Google assistant so need for a hack.

RazerSharp said:
Mini is the maximum size of Gapps I guess supported by this ROM. After flashing just install 'get assistant' app from play store for Google assistant, I think in the next build the ROM has out of box Google assistant so need for a hack.
Click to expand...
Click to collapse
So I got the GAPPS installed. Getting a smaller version worked just fine. But I still have an issue with the iSu program. I got the apk and I installed that, but disabling Root in the app still didn't allow me to launch my app. I tried reading through the instructions but they aren't very clear, more specifically if i should also disable SELinux and what those zip files are and how to install them which are the: iSu_kernel_Reboot_Support_V_2_x_and_up_Enforcing
iSu_kernel_Reboot_Support_V_2_x_and_up_Permissive

lsk91 said:
So I got the GAPPS installed. Getting a smaller version worked just fine. But I still have an issue with the iSu program. I got the apk and I installed that, but disabling Root in the app still didn't allow me to launch my app. I tried reading through the instructions but they aren't very clear, more specifically if i should also disable SELinux and what those zip files are and how to install them which are the: iSu_kernel_Reboot_Support_V_2_x_and_up_Enforcing
iSu_kernel_Reboot_Support_V_2_x_and_up_Permissive
Click to expand...
Click to collapse
Try flashing enforcing one through twrp

PSA: AICP latest treble is great

Okay so I've been trying some treble gsi's and yesterday I installed the AICP image on my phone. I've had zero issues, magisk works, substratum works, the style option in settings works, magisk modules work, the rom is really smooth and has a lot of settings and the battery life is pretty good too :^]
Download link: https://drive.google.com/drive/folders/1LtPNR6R4dxJslXFIjpF9FhyfEfhBTCOa
List of available treble images: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Gapps: https://opengapps.org
Latest magisk: https://drive.google.com/file/d/1YftvNNZVruyYgtFE5wFsgLTDDb4Yux5W/view
Install process is the same as with any other treble rom.
Happy flashing!
edit: typos

Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.

crayonicle said:
Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.
Click to expand...
Click to collapse
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.

jetzecazemier said:
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.
Click to expand...
Click to collapse
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:

crayonicle said:
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:
Click to expand...
Click to collapse
Most welcome!

Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?

Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.

jetzecazemier said:
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.
Click to expand...
Click to collapse
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
See above

Wh1t3Rose said:
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
See above
Click to expand...
Click to collapse
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?

Possible to have a antutu screenshot?

jetzecazemier said:
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?
Click to expand...
Click to collapse
Sounds like root isn't install correctly? Did you check with Root Checker from play store? Which terminal program did you use? You ran su and granted root access first right?
I can't get this ROM to flash. tried both with fastboot tools and flashing the img in TWRP. I just get the Generic "Serious problems have occurred..." message
Edit: NVM I am a moron. Was flashing the AB image. :facepalm:

Bugs spotted
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.

crayonicle said:
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.
Click to expand...
Click to collapse
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.

Wh1t3Rose said:
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.
Click to expand...
Click to collapse
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:

crayonicle said:
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:
Click to expand...
Click to collapse
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?

Wh1t3Rose said:
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?
Click to expand...
Click to collapse
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.

crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
Yes. I'll try flashing again

crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.

Wh1t3Rose said:
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.
Click to expand...
Click to collapse
Yes, that's right, I'm using Pico GApps 8.1 ARM64, try clearing cache of download manager, downloads, google play services, and google play store?

Hi !
Does it work on BND-L21C432 ? What are the steps to install the rom ? Does it have to be EMUI 8.0 ?
Thank you for your work on this rom!

Thread closed

This thread is closed due to violation of protocol

I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD

Steps to install?
I've tried installing with pixel experience (treble), gave me a bootloop.

cichowlasp said:
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Click to expand...
Click to collapse
Is it has any bugs??? Specifically volte working???

Pavan420 said:
Is it has any bugs??? Specifically volte working???
Click to expand...
Click to collapse
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk

cichowlasp said:
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
In India, I used Jio SIM and it works sometime perfectly and sometime it just show incoming calls but when you picked up call the call gets cancelled, and you cannot used Volte for outgoing calls normal calls can be made and jio4g app from playstore doesnt work because it recognize your phone as volte enabled

vvijayk1999 said:
ANDROID P DEVELOPER PREVIEW
Dear friends,
Since the unofficial Android P Dev preview ROM has been developed I'm posting the links below.
Note:
its a preview build, So high chances of instability.
I'm not responsible for any damage caused.
And its not a daily driver.
Steps to install:
Click to expand...
Click to collapse
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558

andromuks said:
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
Click to expand...
Click to collapse
Bro use rr 6.1.0 treble

Way to early for some one with sigle Z2 Plus as primary phone to try out.
I shall wait till more of a device specific build is made available !!

I get an error error7 when installing incall2.zip. Do everyone alike?

EldarWap said:
I get an error error7 when installing incall2.zip. Do everyone alike?
Click to expand...
Click to collapse
Mount system and vendor

Noverity zip link?

guyz_ahead said:
Noverity zip link?
Click to expand...
Click to collapse
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.

JashanjotSidhu said:
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
Click to expand...
Click to collapse
Thanks bro. To all of you wanting to enable Double Tap 2 Wake Dt2w, firstly please thank @optimumpro coz of whom I am aware of the mod kernel aduitor https://forum.xda-developers.com/attachment.php?attachmentid=4484977&d=1524581025 Thanks Optimumpro
? Goto to kernel aduitor grant root and head to wake. Then enable dt2w

how to remove this notice?

EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Install magisk, download titanium, remove pixel setup.

EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Long press on that notification then i option will come then click on it then tap disable...done

I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?

Tarunshrm864 said:
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Click to expand...
Click to collapse
you installed via twrp p-lag-fix.zip? I installed it after aex 5.7 and now I have somehow shown that the version of DP3 is installed

guyz_ahead said:
Install magisk, download titanium, remove pixel setup.
Click to expand...
Click to collapse
Can't you just delete it with the TWRP built-in file manager? That's what I would have done.

OnePlus 5 Treble - Android P Setup

Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul

anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Have a look at the guides section https://forum.xda-developers.com/oneplus-5/how-to/android-p-coming-to-5-5t-year-t3787602

anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE

Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?

archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
yes, still required

Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Sent from my OnePlus5 using XDA Labs

matssa said:
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Click to expand...
Click to collapse
You should ask rom related things in the rom thread https://forum.xda-developers.com/pr...-android-p-developer-preview-t3816659/page116

I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?

cosmic077 said:
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
Click to expand...
Click to collapse
Change twrp. I use blu spark twrp and if i remember right it's name had treble

Vika__ said:
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Click to expand...
Click to collapse
Thanks bro. Lets see if that helps. I saw two videos and both used different twrps.
Today i ll try with blu spark treble twrp.
Lets see if it works.

is volte working ?

On PR1 i have one bug. When send screen to my Anycast , find it and when i select it show "connecting" but never connect. When try connect i see bright up and go to lock screen but don´t send image. Anymore have this problem ?. Any idea to solved it ?. I tried diferent kenels, update mokee vendor base , add entries to build.prop refer to this problem, ..... . Thanks.

Chnages on PR1 over DP5
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)

abhinav.kakku said:
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
Click to expand...
Click to collapse
It's not an official OnePlus release, it's a ported rom, you have to expect problems.

djsubterrain said:
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
Click to expand...
Click to collapse
I know that, Official will take much time now. Hope there is improvement over DP5

apparently we can use VOLTE fix from mi4 on our device
can anybody verify that ?

Android P PR1 stuck on Boot Loop to recovery on Oneplus5
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.

abhinav.kakku said:
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
Click to expand...
Click to collapse
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on

seniug said:
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
Click to expand...
Click to collapse
Agreed your steps need to be:
I have followed the steps, Wipe device, format data
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery
---------- Post added at 08:03 AM ---------- Previous post was at 08:00 AM ----------
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
Does anyone know what purpose the Mokee ROM portion of the setup serves on a technical level? Also has anyone noticed that the front camera works on snapchat but not in the google cam port? interesting stuff.

[GUIDE] How to boot RR 7.0 GSI on Mi Max 3

Hello everyone, I followed the RR GSI group about it and many couldn't boot RR 7.0. This guide was created especially for those who could not boot RR 7.0. Go!
This guide is also suitable for flashing a GSI that does not boot. (Like AEX, PixelDust ...)
You should have an UNLOCKED BOOTLOADER and TWRP Recovery (I Recommend TWRP by Nijel8 - https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084)
Instructions how to boot RR 7.0:
1)Full wipe (system,data,vendor, dalvik,cache,internal storage) + format data.
2)Flash No-verity-opt patch + EU developer on 8.1 oreo or EU Stable 10.2.1.0.
3)Factory reset
4)Reboot to recovery
5)Flash POST-sGSI_3_v0.6 .zip
6)Flash RR System.img
7)Flash Magisk 18.0
8)Reboot to system
9)Setup system
10)Reboot to recovery
11)Flash BiTGApps or OpenGapps (Recommended) + Magisk 18.0
12)Reboot to system
Enjoy
Download BiTGapps: https://official-bitgapps-com.webnode.com/the-band/
Download RR 7.0 GSI (arm64-aonly): https://get.resurrectionremix.com/?dir=gsi
Download: no-verity-opt patch - https://t.me/nitrogencloud/271
Download POST-sGSI_3_v0.6 .zip: https://t.me/nitrogencloud/269

Can I flash EU 8.8.30 (Full ROM) on the global 10.2.1.0

arecky said:
Can I flash EU 8.8.30 (Full ROM) on the global 10.2.1.0
Click to expand...
Click to collapse
Yes you can
Regards
Sent from my MI MAX 3 using XDA Labs

after flash RR-O and everything will be ok, yes. No problem with ARB?
I have global 10.2.1.0 now I want try RR 7.0
Global 10.2.1.0 >EU 8.8.30>RR 7.0 is ok

I think that wipe system will brick the phone............

arecky said:
after flash RR-O and everything will be ok, yes. No problem with ARB?
I have global 10.2.1.0 now I want try RR 7.0
Global 10.2.1.0 >EU 8.8.30>RR 7.0 is ok
Click to expand...
Click to collapse
You can directly use 10.2.1.0 eu, follow instructions and reflash 10.2.1, I used it and it boot fine.
palalos81 said:
I think that wipe system will brick the phone............
Click to expand...
Click to collapse
No, if you follow the instructions and flash every files, no problem. Work with stable eu 10.2.1.0 too.
Regards

Good day. After installing RR 7.0, the Kernel Adiutor program shows a battery capacity of 3400 mah instead of 5500 mah. Can this be fixed?

bocha79 said:
Good day. After installing RR 7.0, the Kernel Adiutor program shows a battery capacity of 3400 mah instead of 5500 mah. Can this be fixed?
Click to expand...
Click to collapse
Happen with many gsi, it's not a big problem in my opinion.
Regards

What is POST-sGSI_3_v0.6 .zip, what does it?
What is No-verity-opt patch, what does it?
Why flash Magisk18.0 two times?
Can base Global-Dev ROM 9.1.17, too? Why Global stable?
Why

I am on AOSP 9.0. Do I really need to flash the eu-rom and all the rest (POST sgs, no-verity-opt patch too?

@Skyllery
Can you please make some screenshots of the RR UI on the Max 3? I like to see it... still waiting for bootloader unlock on my Max 3.
btw: Great to see someone here who is into modding/flashing! :good:

Skyllery said:
You can directly use 10.2.1.0 eu, follow instructions and reflash 10.2.1, I used it and it boot fine.
No, if you follow the instructions and flash every files, no problem. Work with stable eu 10.2.1.0 too.
Regards
Click to expand...
Click to collapse
Me too, but when i flash magisk 18, it still boot, then go to the launcher, it shutdown and reboot to recovery

Lecterr said:
What is POST-sGSI_3_v0.6 .zip, what does it?
What is No-verity-opt patch, what does it?
Why flash Magisk18.0 two times?
Can base Global-Dev ROM 9.1.17, too? Why Global stable?
Why
Click to expand...
Click to collapse
Post sgsi is a fix for mtp as far as I know
No verity is to disable encryption everywhere
You only need to flash it the first time. Would work fine.
And no boot only with Oreo vendor. Don't ask why dunno
Feenfleisch said:
I am on AOSP 9.0. Do I really need to flash the eu-rom and all the rest (POST sgs, no-verity-opt patch too?
Click to expand...
Click to collapse
Yes everything is needed. If you don't flash eu After wiping you don't have vendor files. Don't need to boot it (MIUI) reboot directly to recovery and follow steps after this one.
Consider to join telegram groups just type mi max 3 on telegram.
Regards
Sent from my MI MAX 3 using XDA Labs

JustDroidIt-XDA said:
@Skyllery
Can you please make some screenshots of the RR UI on the Max 3? I like to see it... still waiting for bootloader unlock on my Max 3.
btw: Great to see someone here who is into modding/flashing! :good:
Click to expand...
Click to collapse
For sure check attached files
chetchuakaka said:
Me too, but when i flash magisk 18, it still boot, then go to the launcher, it shutdown and reboot to recovery
Click to expand...
Click to collapse
You installed magisk manager ? Don't happen here and don't see on telegram group neither. Supposing you correctly followed instructions.
Consider join mi Max 3 telegram group just type this on search bar on this app. More support
Regards
Sent from my MI MAX 3 using XDA Labs

Cannot view or download the images: 404 not found.

Hi,
Followed the guide to the toe...
On reboot, I have the RR splash screen but it is stuck there
Will have to stick to MIUI or one of it's derivatives
Thanks anyways...
Regards.

JustDroidIt-XDA said:
Cannot view or download the images: 404 not found.
Click to expand...
Click to collapse
Sorry it's buggy don't know why. Join the telegram group there's many Ss even on the channel
Regards
Sent from my MI MAX 3 using XDA Labs

Thank you very much for your great guide!
RR rom is my best rom
but in my case, youtube video is not working

GoodHuman0817 said:
Thank you very much for your great guide!
RR rom is my best rom
but in my case, youtube video is not working
Click to expand...
Click to collapse
You used which miui as base ? Restored apps ?
It didn't happen here using vanced or official app or chrome. Maybe wipe dalvik and cache or reinstall app.
BTW for bt fix replace files in vendor. Nikita forget to share the file here. It's the same as the others. Search on guide forum for it can't send it through xDA lab
Regards
Sent from my MI MAX 3 using XDA Labs

Skyllery said:
You used which miui as base ? Restored apps ?
It didn't happen here using vanced or official app or chrome. Maybe wipe dalvik and cache or reinstall app.
BTW for bt fix replace files in vendor. Nikita forget to share the file here. It's the same as the others. Search on guide forum for it can't send it through xDA lab
Regards
Sent from my MI MAX 3 using XDA Labs
Click to expand...
Click to collapse
Thank you for your answer.
I did the installation in the same way as this thread.
And I installed using the file from this thread. (EU 8.8.30, etc.)
I used 'phh-trebble-pie-fixes.zip' to brightness fix (https://forum.xda-developers.com/mi-max-3/how-to/guide-android-9-pie-aosp-phh-treble-rom-t3862708)
And I tried to change 'BiTGApps' to 'official openGapps Stock', 'official openGapps micro', and 'official openGapps nano'.
But the result was the same.
It works fine in chorme. but doesn't work on official youtube app and vanced app.