Database Users

Root Lenovo K3 Note India (k50a40)

Hello everyone.
Today I'm going to show you how to root Lenovo K3 Note India.
Pre-Requisites :
Lenovo USB Tools – Download it from here: https://userscloud.com/n7zmi1utn6wz
Flash Tools – Download it from here. https://userscloud.com/958tvsa17724
CWM Recovery Image and Scatter Text File (Developer – liuxinghost)- Download it from here. https://userscloud.com/yexc173ibpv8
Update.zip - Download it from here. https://userscloud.com/o8m7u398nmv5
How to Install CWM on Lenovo K3 Note :
Things to do before you Root Lenovo L3 Note :
Take a backup of your data. We don’t guarantee if something is erased. Always take precautions .
Enable USB Debugging on your device.
Goto > Settings > Developer Options > USB Debugging.
If Developer Options is not located under settings then enable it by going toSettings > About Phone > Device Info and tap on Build Number for about 7-8 times. And then go back and follow previous step.
Make sure the battery is 50% charged or more.
Go to Settings > Security and enable Unknown Sources option.
How to Install CWM on Lenovo K3 Note :
Step 1 : Extract the LenovoUsbDriver_Techolaty.Net.rar and install the software in your PC.
Step 2 : Extract the Flash_Tools_Techolaty.Net.rar file and then open flash_tool.exe (run it as an administrator) Also Extract Recovery_Lemon_K3_Note_Techolaty.Net.rar in the same folder.
Step 3 : Now select MT6752_Android_scatter.txt .
Step 4 : Click on Options from the top then Download and make sure DA DL all with Checksum is checked.
Step 5 : Now just tick the checkbox recovery and browse to the extracted files and locate recovery.img
Step 6 : Now remove the battery of your phone & connect USB cable. Wait for 10 seconds & press the download button on PC. Then wait 05 seconds & insert battery in phone without removing USB cable. Wait for seconds & then Congrats !! CWM Recovery installed.
Steps to enter Recovery mode in Lenovo K3 Note
Press and hold the Volume Down Button + Volume Up Button + Power Button.
When you see the Boot Screen, Release the Power Button but keep the Volume Buttons pressed until you see the Recovery Screen.
How to Root Lenovo K3 Note :
Step 1 : Copy the UPDATE-SuperSU-v2.46.zip file in your SD card root folder
Step 2 : Enter/Reboot to recovery mode on your device
Step 3 : Select the UPDATE-SuperSU-v2.46.zip file and click update to root lenovo k3 note
Congrats !! YOur device is rooted now!!
You can confirm your device is rooted or not by downloading the Root Check application from Playstore.
If there any query then kindly comment or contact me & @arunshanker.

Works like a charm. Finally get rooted. Thanks :good:
But the CWM recovery is in Chinese language.
How can I change that to English ?

There is no option to change that Chinese language. If you want to use recovery in English then you should switch from CWM Recovery to TWRP Recovery. Its better than CWM Recovery. Here is link to download TWRP Recovery for Lenovo K3 Note.
lenovo-forums.ru/index.php?app=core&module=attach&section=attach&attach_id=38939
You can change your recovery with my given method with spftools like you done your recovery installation before. Enjoy.
Sent from my Lenovo K50-t5 using XDA Free mobile app

my phone isnot starting after this please help

Step 5 - Checkbox recovery
Thanks. It's rooted now.

Is it really safe to root with FlashTool bcuz i heard that using this method is dangerous pls tell me .... M new to this though i've rooted 3 phones before but my last one asus zenfone 5 got bricked after rooting and using for almost 2 weeks but after that it's os was deleted n m regretting bout it but i too desperate to root k3 note k50a40 as there's to ram occupation n no option for themes etc..

thx.

Unrooting
will we be able to unroot and get OTA from Lenovo system updates.. Please tell me else I would end up bricking the device after updates..

Thanks for all your work !

Su is not getting updated
My su binary is not getting updated ..recovery is not flashing the update file but I've noticed its showing both of the language English and Chinese.. What to do stuck here..plz help..and yah I've tried changing the name of the file too..then too its not getting updated yaar. Do something

while rooting i had reached this step
Step 6 : Now remove the battery of your phone & connect USB cable. Wait for 10 seconds & press the download button on PC. Then wait 05 seconds & insert battery in phone without removing USB cable. Wait for seconds & then Congrats !! CWM Recovery installed.
BUT after removing batery i tried starting my mobile but it wont start
i removed usb cancelled everything but still its not powering on plz help

ishan dixit said:
my phone isnot starting after this please help
Click to expand...
Click to collapse
You should flash your mobile using spftools.

real_sam said:
Is it really safe to root with FlashTool bcuz i heard that using this method is dangerous pls tell me .... M new to this though i've rooted 3 phones before but my last one asus zenfone 5 got bricked after rooting and using for almost 2 weeks but after that it's os was deleted n m regretting bout it but i too desperate to root k3 note k50a40 as there's to ram occupation n no option for themes etc..
Click to expand...
Click to collapse
If you root your mobile carefully step by step as I given then no issues. I am also using K3 note.

Vedansh17 said:
will we be able to unroot and get OTA from Lenovo system updates.. Please tell me else I would end up bricking the device after updates..
Click to expand...
Click to collapse
You should try official Chinese rom of Lenovo K3 note as its best & secure rom. You can download it from official vibe ui website.

Rup shah said:
My su binary is not getting updated ..recovery is not flashing the update file but I've noticed its showing both of the language English and Chinese.. What to do stuck here..plz help..and yah I've tried changing the name of the file too..then too its not getting updated yaar. Do something
Click to expand...
Click to collapse
Unroot you mobile in option from SuperSu application & reboot you device. After reboot, go to recovery mode & install updatesu.zip again.

shubhamsasmal said:
while rooting i had reached this step
Step 6 : Now remove the battery of your phone & connect USB cable. Wait for 10 seconds & press the download button on PC. Then wait 05 seconds & insert battery in phone without removing USB cable. Wait for seconds & then Congrats !! CWM Recovery installed.
BUT after removing batery i tried starting my mobile but it wont start
i removed usb cancelled everything but still its not powering on plz help
Click to expand...
Click to collapse
1st remove battery then connect with usb then press download & then after inser battery. You'll see installing line in spftools.

i can't update supersu.zip using recovery mode. WHY?

shyamhot said:
i can't update supersu.zip using recovery mode. WHY?
Click to expand...
Click to collapse
Which recovery you are using?

Thanks bro.
Keep up the good work.
Finally able to remove bloatwares(was irritating me much).
BTW use TWRp.

I guess the adb & fastboot method is far better, safe and quicker method than the SPFtools. Another xda forums thready can be referred for the method.
http://forum.xda-developers.com/k3-note/general/ufficial-thread-lenovo-k3-note-t3102997

Huawei P9 Lite stuck on bootloop, can't enter recovery mode

Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken

There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.

GloryNation said:
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
Click to expand...
Click to collapse
tried to enter recovery, still not work. can't go to developer options because phone is stuck on logo, can't power off. couldn't find any solution that works anywhere, been searching for more than 6 hours, still no use. phone model is VNS-L21 forgot to mention earlier

What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.

GloryNation said:
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
Click to expand...
Click to collapse
I tried to install nougat update, computer recognizes it only in fastboot. holding volume buttons haven't changed anything still no progress. the thing is i had installed nougat a moth or so ago and it worked fine, then rolled back to marshmallow and now this. i'm pretty sure i tried to install correct package, because it was the same i had installed earlier

Did you download a adb tool on your computer that have the 'fastboot.exe' file? If so open that folder,
Have the mouse curser hover in that folder, hold down shift & right click the mouse
Open command prompt
Connect phone as is in fastboot mode
Type adb devices & press enter
Type adb continue & press enter

Hi,
I have the same issue as ellanyx.
my phone can only be stucked while booting or if I connect my phone to a computer, I'm able to boot it in fastboot.
as ellanyx, I didn't enable usb-debug nor OEM unlock option...
so when I'm in fastboot, I type the command "fastboot oem unlock xxxxxx" (hopefully the different data needed are the correct ones mentioned on the box of the phone) I get this error message:
C:\Users\Dieu\Downloads\SRKToolHuawei-STABLE-V1.3-20160619>fastboot oem unlock xxxxx
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
and off course the other options like "fastboot flash recovery recovery.img "... doesn't work.
I can't use the adb commands neither.
when I type the commande, as mentioned above, "adb devices" or "adb continue", nothing works.
So I'm a bit desesperate
do you have any solution for this kind of issue?
thanks

Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards

Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.

pyromana said:
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
Click to expand...
Click to collapse
Probably you didnt have correct Oeminfo for MM if dload method didnt work....Try to conect phone with Toolkit and follow procedure for flashing oeminfo and custombin, after that flash stock recovrry and b161 via dload metod. You will find it on forum here.
Regards

the procedure from SRK toolkit?
would it be possible to provide it? because I can't unlock the OEM and I didn't tick the USB debug think.

Maybe problem with the ps not phone so u can not connect with adb
Try with different pc you must have flash oem with fast boot without enable adb from phone if u in fastboot

I can only boot my phone in fastboot (vol- + power) and not in recovery (vol+ + power).
also when using the SRK toolkit, the first screen tells me to be sure that the usb debugging is enable, which I haven't done...
if I'm not mistaken, fastboot is to use the fastboot command and recovery the adb commands
the connection with fastboot works on my computer, the link is made. however when I type the command to unlock the OEM, I get an error stating that the command is not allowed.
when I use the SRK toolkit, with the different questions, he tries to connect the phone with adb and waiting.... waiting...
is there a command to reboot in recovery but from fastboot? in the otherway around it exists but it doesn't seem that from fastboot to recovery it exists.
thanks.

Alexxxx1 said:
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Click to expand...
Click to collapse
dload method works on N. I downgraded my phone from unofficial N update back to official MM update using this method yesterday. You just have to enable OEM at developer options on settings.

It looks like people can't be bothered to read the 1st post properly before they reply.
HE CAN NOT BOOT TO ANDROID SO HE CAN NOT ENABLE OEM OR ACTIVATE USB DEBUGGING!!!!
What he CAN do, is go into eRecovery and Fastboot.
With that in mind, I would suggest using the dload method through fastboot.
Also, make sure it is Huawei SRK Tools 2.0 that is used, as it actually asks if you are in debug mode or fastboot.
Note that there is a few bugs in SRK 2.0:
The TWRP recovery file has the wrong filename in the package, so it WILL fail unless you name it correctly.
Also, when trying to root, do NOT use the "P9 Lite" method as that WILL fail too. Use the "P9/P9 Plus" method.
I am trying to set up a complete guide that can restore the phone when it is stuck in fastboot, however I apparently went a step too far...

ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken[/QUOTE
Do you have TWRP recovery ?
---------- Post added at 09:55 AM ---------- Previous post was at 09:50 AM ----------
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
Click to expand...
Click to collapse
Boot into fastboot mode and flash a custom recovery by meticulus. Link : meticulus.co.vu
Then whenyou get stuck hold power and vol down button for 2 minutes the phone will reboot and then when it says that your device has been unlocked and cant be trusted then only press vol up key ( dont press power button then). The u get into huawei recovery. From that u should power off the phone. Now get a custom rom by meticulus into your device sd card ( Cyanogenmod 13 is recommended ). Then insert sd card in a powered off phone. Now press vol up and power key and flash gapps and custom rom and you are good to go.
Click to expand...
Click to collapse

So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?

SnowmanDK said:
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
Click to expand...
Click to collapse
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options

Arsaam said:
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Click to expand...
Click to collapse
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.

SnowmanDK said:
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
Click to expand...
Click to collapse
Go to fast boot mode and from their try to flash meticulus recovery.
You can also try the adb method as well.
Visit meticulus.co.vu

Redmi 4 prime/pro [brick] [geekbuying]

Hello xdadevelopers users,
before 3 months I've bought my XIAOMI REDMI 4 PRIME with Global ROM from Geekbuying.
Before 1 week I've wanted to root my device and flash ressurection remix.
So I've followed all tutorials and installed all correct:
1. Backuped all my things (First backuped in the Settings & then pulled everything via MTP on my Computer)
2. Unlocked my Device (But my Phone hasn't got wiped after this like I thought)
3. Installed TWRP and Magisk
4. Booted into TWRP
5. Put "iosfirmware for 7.1 Nougat + RR Rom + Gapps Nano" into my root folder
6. Wiped all except Internal Storage
7. Flashed everything in this order: "iosfirmware --> RR ROM --> Gapps"
8. Wiped Cache and reboot
After this procedure my phone wont turn on and stayed on black screen.
I couldn't enter fastboot or the mode to enter download mode.
But the devices still showes up in Device Manager as Qualcomm 9003 Device.
So I stay chilled and searched online for Global Stock ROM & tools and videos that would help me to unbrick my device.
I've tested a lot, like MiFlash method, Testpoint method (Yes I also opened my device & also holding power + volume up & spamming volume down.)
All this things failed an the phone stayed black and MiFlash just sayed "cannot receive hello packet".
Now I am curios is the situation lost?
I've also read some articles that geekbuying is giving out fake roms that just show the user that the device is unlocked even if it's not.
Could that be true are there any other possible things I can do or can I get my device repaired for free from geekbuying.
Hope for some answers also if I am already in the mood to buy a new phone.
Greetings kazumamon

kazumamon said:
Hello xdadevelopers users,
before 3 months I've bought my XIAOMI REDMI 4 PRIME with Global ROM from Geekbuying.
Before 1 week I've wanted to root my device and flash ressurection remix.
So I've followed all tutorials and installed all correct:
1. Backuped all my things (First backuped in the Settings & then pulled everything via MTP on my Computer)
2. Unlocked my Device (But my Phone hasn't got wiped after this like I thought)
3. Installed TWRP and Magisk
4. Booted into TWRP
5. Put "iosfirmware for 7.1 Nougat + RR Rom + Gapps Nano" into my root folder
6. Wiped all except Internal Storage
7. Flashed everything in this order: "iosfirmware --> RR ROM --> Gapps"
8. Wiped Cache and reboot
After this procedure my phone wont turn on and stayed on black screen.
I couldn't enter fastboot or the mode to enter download mode.
But the devices still showes up in Device Manager as Qualcomm 9003 Device.
So I stay chilled and searched online for Global Stock ROM & tools and videos that would help me to unbrick my device.
I've tested a lot, like MiFlash method, Testpoint method (Yes I also opened my device & also holding power + volume up & spamming volume down.)
All this things failed an the phone stayed black and MiFlash just sayed "cannot receive hello packet".
Now I am curios is the situation lost?
I've also read some articles that geekbuying is giving out fake roms that just show the user that the device is unlocked even if it's not.
Could that be true are there any other possible things I can do or can I get my device repaired for free from geekbuying.
Hope for some answers also if I am already in the mood to buy a new phone.
Greetings kazumamon
Click to expand...
Click to collapse
Maybe you shouldn’t have flashed iosfirmware at all. Probably isn’t supported on Redmi 4 prime. Try uninstalling it, or booting into twrp and do a full wipe ( system, cache, data) then install RR and Gapps only.

kazumamon said:
Hello xdadevelopers users,
before 3 months I've bought my XIAOMI REDMI 4 PRIME with Global ROM from Geekbuying.
Before 1 week I've wanted to root my device and flash ressurection remix.
So I've followed all tutorials and installed all correct:
1. Backuped all my things (First backuped in the Settings & then pulled everything via MTP on my Computer)
2. Unlocked my Device (But my Phone hasn't got wiped after this like I thought)
3. Installed TWRP and Magisk
4. Booted into TWRP
5. Put "iosfirmware for 7.1 Nougat + RR Rom + Gapps Nano" into my root folder
6. Wiped all except Internal Storage
7. Flashed everything in this order: "iosfirmware --> RR ROM --> Gapps"
8. Wiped Cache and reboot
After this procedure my phone wont turn on and stayed on black screen.
I couldn't enter fastboot or the mode to enter download mode.
But the devices still showes up in Device Manager as Qualcomm 9003 Device.
So I stay chilled and searched online for Global Stock ROM & tools and videos that would help me to unbrick my device.
I've tested a lot, like MiFlash method, Testpoint method (Yes I also opened my device & also holding power + volume up & spamming volume down.)
All this things failed an the phone stayed black and MiFlash just sayed "cannot receive hello packet".
Now I am curios is the situation lost?
I've also read some articles that geekbuying is giving out fake roms that just show the user that the device is unlocked even if it's not.
Could that be true are there any other possible things I can do or can I get my device repaired for free from geekbuying.
Hope for some answers also if I am already in the mood to buy a new phone.
Greetings kazumamon
Click to expand...
Click to collapse
mate, did u solved somehow? I think I have a similar problem. I was on RR and after I power off my phone now it doesn't power on anymore

Oceansoul91 said:
mate, did u solved somehow? I think I have a similar problem. I was on RR and after I power off my phone now it doesn't power on anymore
Click to expand...
Click to collapse
Sorry for that late answer really need to switch my mail.
No I sold my bricked device for 50 bucks and bought a new phone out of frustration.

Need Official Rom for Leeco Le Pro 3 Elite x722

hello
please provide me the link for official rom of leeco le pro 3 elite x722 version..i bought it from banggood.com
if anyone bought the same device from banggood.com and have not flashed..please give me backup of your software
my phone got bricked and didnot find and official software links(bug.le.com/cn link not working for me)
please help me..thanks in advance

harshaloves said:
hello
please provide me the link for official rom of leeco le pro 3 elite x722 version..i bought it from banggood.com
if anyone bought the same device from banggood.com and have not flashed..please give me backup of your software
my phone got bricked and didnot find and official software links(bug.le.com/cn link not working for me)
please help me..thanks in advance
Click to expand...
Click to collapse
Maybe you can use this one by Batyan:
https://forum.xda-developers.com/showpost.php?p=74858768&postcount=12
Also there is normally stock system image in the internal of the phone (4gb) but I not sure how to flash it.

Moon75 said:
Maybe you can use this one by Batyan:
https://forum.xda-developers.com/showpost.php?p=74858768&postcount=12
Also there is normally stock system image in the internal of the phone (4gb) but I not sure how to flash it.
Click to expand...
Click to collapse
already used this..nothing happened
thanks for replying

harshaloves said:
already used this..nothing happened
thanks for replying
Click to expand...
Click to collapse
May be you can try this one (different stock 20S rom) I think:
https://forum.xda-developers.com/showpost.php?p=74128632&postcount=40
Now flash vendor 020s (batyan/bangood).
Quote:
2) 5.8.020S (firmware via fastboot) - Download the firmware (exactly as received from Banggood). There is Russian language and Google Play, there are no Chinese applications. The optimal version for those who want to install a custom recovery and root. Unlocking the bootloader is possible.
Instruction:
In the off state, hold down the Volume - and the power button to enter the fastboot mode. Connect the phone to the computer and start Start.bat. The installation will start automatically and the phone will reboot itself.
https://drive.google.com/file/d/0B-9...VPTGlyR2c/view
It's discussed on page 4 and 5 of this tread you can check it out if not working you can go to read:
https://forum.xda-developers.com/le...nd-mods/stock-eui-5-8-20s-x722-t3680624/page4

Moon75 said:
May be you can try this one (different stock 20S rom) I think:
https://forum.xda-developers.com/showpost.php?p=74128632&postcount=40
Now flash vendor 020s (batyan/bangood).
Quote:
2) 5.8.020S (firmware via fastboot) - Download the firmware (exactly as received from Banggood). There is Russian language and Google Play, there are no Chinese applications. The optimal version for those who want to install a custom recovery and root. Unlocking the bootloader is possible.
Instruction:
In the off state, hold down the Volume - and the power button to enter the fastboot mode. Connect the phone to the computer and start Start.bat. The installation will start automatically and the phone will reboot itself.
https://drive.google.com/file/d/0B-9...VPTGlyR2c/view
It's discussed on page 4 and 5 of this tread you can check it out if not working you can go to read:
https://forum.xda-developers.com/le...nd-mods/stock-eui-5-8-20s-x722-t3680624/page4
Click to expand...
Click to collapse
thanks for reply..mobile got hard bricked and oem locked..also recovery is not opening..

harshaloves said:
thanks for reply..mobile got hard bricked and oem locked..also recovery is not opening..
Click to expand...
Click to collapse
No Fastboot mode? I think it just need Fastboot/download mode to do it:
In the off state, hold down the Volume - and the power button to enter the fastboot mode. Connect the phone to the computer and start Start.bat. The installation will start automatically and the phone will reboot itself.
https://drive.google.com/file/d/0B-9...VPTGlyR2c/view

nokia 6 ta1000 full brick.

In my nokia 6 ta1000 , i flashed mena rom and used oreo for 3days. Now,today i wanted to roll back to my old ta1000 rom. So i flashed it .it was successful. But when the device booted it stuck in nokia ... Thn no progress. I think it bricked ... Thn i flashed again but no result... Now the device don't recognized by ost app also... Help me as soon as possibe,,as it is my daily driver .???
Note: it doesn't go to fastboot either. It just shows ,no command. And turned off instantly...my battery chrg is 75% though...

Ta-1000 rom mdl: D1C-331A-0-00CN-A01.7.1.nb0
MENA ROM MODEL: PLE-3320-0-00WW-A02.nb0

When it shows "no command" press power button and volume up, then immediately release volume up button. There is a chance you'll get into recovery and from there you can put your phone into "download" mode, so OST LA will detect it.
P.S. A bit dumb idea to do risky experiments with a daily driver.

ziaur786 said:
In my nokia 6 ta1000 , i flashed mena rom and used oreo for 3days. Now,today i wanted to roll back to my old ta1000 rom. So i flashed it .it was successful. But when the device booted it stuck in nokia ... Thn no progress. I think it bricked ... Thn i flashed again but no result... Now the device don't recognized by ost app also... Help me as soon as possibe,,as it is my daily driver .
Note: it doesn't go to fastboot either. It just shows ,no command. And turned off instantly...my battery chrg is 75% though...
Click to expand...
Click to collapse
Dear brother, i would like to suggest you one thing, I not 100% sure but it might help you, follow these steps
Please read the instructions very carefully
also make sure you have all driver and framework properly installed
1. Download the TA-1000 Firmware from here
2. Then open your OST tool.
3. When you select the firmware on OST tool, after that it will prompt you to connect your device
4. Just do not do anything, keep patience, turn off your device properly and then connect to the computer. It will directly boot into download mode.
done, rest of the steps are same as you flashed your device before.
Enjoy
hit the thanks button if you find this useful
happy flashing