When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I can't go to recovery too the result is same normal booting but I still can boot into fastboot mode and I try to flash stock recovery or TWRP but it doesn't work.
What should I do now? :crying:
Thanks.
you need copy sdcard dload-> update.app your firmware stock
you need battery drain 0% if dead battery still hold power more than 2 mins then plug charging less than 1% and final hold both vol up+down power charging ac
Gamkutopolowk said:
you need copy sdcard dload-> update.app your firmware stock
you need battery drain 0% if dead battery still hold power more than 2 mins then plug charging less than 1% and final hold both vol up+down power charging ac
Click to expand...
Click to collapse
I'll try that If any progress I'll update soon.
Thanks for ANS
H4ckzTh said:
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I can't go to recovery too the result is same normal booting but I still can boot into fastboot mode and I try to flash stock recovery or TWRP but it doesn't work.
What should I do now? :crying:
Thanks.
Click to expand...
Click to collapse
Same thing happened to me and i solved this problem by using hwota method. If you were in 7, you can use this topic:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page13
If you were in 8
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Good luck
Gamkutopolowk said:
you need copy sdcard dload-> update.app your firmware stock
you need battery drain 0% if dead battery still hold power more than 2 mins then plug charging less than 1% and final hold both vol up+down power charging ac
Click to expand...
Click to collapse
@Gamkutopolowk Ok, I use this method and I'm stuck at "Your device is booting now".
Mr.Legend said:
Same thing happened to me and i solved this problem by using hwota method. If you were in 7, you can use this topic:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page13
If you were in 8
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Good luck
Click to expand...
Click to collapse
@Mr.Legend Yeah I'm in 8 and I run Replace_Recovery.bat to flash TWRP successfully but like I said I can't boot into recovery I don't know why.
I think if recovery work it'll be easier to bring she back.
It possible to flash entire rom via fastboot like nexus phone?
H4ckzTh said:
@Gamkutopolowk Ok, I use this method and I'm stuck at "Your device is booting now".
@Mr.Legend Yeah I'm in 8 and I run Replace_Recovery.bat to flash TWRP successfully but like I said I can't boot into recovery I don't know why.
I think if recovery work it'll be easier to bring she back.
It possible to flash entire rom via fastboot like nexus phone?
Click to expand...
Click to collapse
Stuck at the same point
@H4ckzTh did you manage to fix your phone?
tarekeldeeb said:
Stuck at the same point
@H4ckzTh did you manage to fix your phone?
Click to expand...
Click to collapse
Not yet, but I have already bought the new one.
And I find the solution using this program, link here. Maybe It's work.
Goodluck
H4ckzTh said:
Not yet, but I have already bought the new one.
And I find the solution using this program, link here. Maybe It's work.
Goodluck
Click to expand...
Click to collapse
Mm.. I cannot afford to buy a new one .. still struggling to bring it back.
I installed the Huawei Multi Tool >> Unbrick , added 4 images (skipping userdata.img), the tool states that all images are flashed successfully.
When I rebooted, got the same error
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Click to expand...
Click to collapse
How can I re-flash the eRecovery? I need to try the dload method with Update.app
Any help is appreciated.
tarekeldeeb said:
Mm.. I cannot afford to buy a new one .. still struggling to bring it back.
I installed the Huawei Multi Tool >> Unbrick , added 4 images (skipping userdata.img), the tool states that all images are flashed successfully.
When I rebooted, got the same error
How can I re-flash the eRecovery? I need to try the dload method with Update.app
Any help is appreciated.
Click to expand...
Click to collapse
you have different model region? or rebrand ?
H4ckzTh said:
When I booting my phone she is in ERROR MODE.
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
I can't go to recovery too the result is same normal booting but I still can boot into fastboot mode and I try to flash stock recovery or TWRP but it doesn't work.
What should I do now? :crying:
Thanks.
Click to expand...
Click to collapse
Use this method:
https://forum.xda-developers.com/p10-plus/how-to/unbrick-upgrade-huawei-p10-plus-android-t3818725
Gamkutopolowk said:
you have different model region? or rebrand ?
Click to expand...
Click to collapse
No, it's Europe/Middle East. Not changed.
I was trying to apply HWOTA when it brick. The HWOTA script seems to have corrupted partitions 30 and 33. Do you know what images should be flashed on those?
tarekeldeeb said:
No, it's Europe/Middle East. Not changed.
I was trying to apply HWOTA when it brick. The HWOTA script seems to have corrupted partitions 30 and 33. Do you know what images should be flashed on those?
Click to expand...
Click to collapse
Try Huawei MultiTool select tab unbrick check all
Gamkutopolowk said:
Try Huawei MultiTool select tab unbrick check all
Click to expand...
Click to collapse
I've done that, and the tool displayed success. But the problem persists.
Even double tried it, rebooted, same symptoms.
Any clue?
Related
Hi everybody, i soft bricked my lovely Nova, here is the situatiuon :
- I tried to update the phone with the Emui 5 OTA zip but the phone turned off and now won't boot anymore
- When i try to boot normaly, it show the Huawei eRecovery and fail to recover the phone
- I can boot on fastboot mode / rescue mode
- I have TWRP installed and can boot on it but when i try to flash the can-L11c432.zip supplied by MORPH, it says "Failed to mount '/cust'" and stops here.
I really don't know what to do, moreover i lost the backup i made with TWRP.
If someone can help me i'll offer him a meal (paypal)
Sorry for my bad english and have a nice day everyone.
Hi Keezle,
here is the recovery.img from the EMUI5 Beta Update. Flash it with fastboot and apply the update once again (Boot with Power + Vol down + Vol up) After the Update is complete make a full wipe in the stock recovery.
You need a external SD Card with the dload folder thats include the Update.
Keezle said:
Hi everybody, i soft bricked my lovely Nova, here is the situatiuon :
- I tried to update the phone with the Emui 5 OTA zip but the phone turned off and now won't boot anymore
- When i try to boot normaly, it show the Huawei eRecovery and fail to recover the phone
- I can boot on fastboot mode / rescue mode
- I have TWRP installed and can boot on it but when i try to flash the can-L11c432.zip supplied by MORPH, it says "Failed to mount '/cust'" and stops here.
I really don't know what to do, moreover i lost the backup i made with TWRP.
If someone can help me i'll offer him a meal (paypal)
Sorry for my bad english and have a nice day everyone.
Click to expand...
Click to collapse
I came to a similar situation. The CUST supplied by Morph seems not to be flashable. Untick the CUST when flashing the NANDROID. It will go through the process and the phone will eventually boot again.
-=MoRpH=- said:
Hi Keezle,
here is the recovery.img from the EMUI5 Beta Update[/URL]. Flash it with fastboot and apply the update once again (Boot with Power + Vol down + Vol up) After the Update is complete make a full wipe in the stock recovery.
You need a external SD Card with the dload folder thats include the Update.
Click to expand...
Click to collapse
Si, i put the C432B320 update.zip in dload folder on an external SD Card, i flashed the Emui 5 beta update recovery successfully, but when i boot with Power + Vol down + Vol up it starts the installation and stops at 5% saying "Software install failed !". Should i use another update.zip file ?
Thank you MORPH
Keezle said:
Si, i put the C432B320 update.zip in dload folder on an external SD Card, i flashed the Emui 5 beta update recovery successfully, but when i boot with Power + Vol down + Vol up it starts the installation and stops at 5% saying "Software install failed !". Should i use another update.zip file ?
Thank you MORPH
Click to expand...
Click to collapse
Maybe unpack the C432B320 until you have an update.app in dload folder. I did that and flashed the ROM. The first try was a failure and I had to restore a NANDROID (bootloop). Currently, I'm trying to flash it again but now with the EMUI5 recovery morph has supplied.
System of a pWne!^ said:
Maybe unpack the C432B320 until you have an update.app in dload folder. I did that and flashed the ROM. The first try was a failure and I had to restore a NANDROID (bootloop). Currently, I'm trying to flash it again but now with the EMUI5 recovery morph has supplied.
Click to expand...
Click to collapse
I'll try this now thank you
Keezle said:
I'll try this now thank you
Click to expand...
Click to collapse
But be careful and have a backup. I just flashed it and it seems not to work again :/ It just keeps on sitting on the Huawei logo for minutes now. That's it.
System of a pWne!^ said:
But be careful and have a backup. I just flashed it and it seems not to work again :/ It just keeps on sitting on the Huawei logo for minutes now. That's it.
Click to expand...
Click to collapse
So now, it start installing update and says "installation failed !" at 50%
Keezle said:
So now, it start installing update and says "installation failed !" at 50%
Click to expand...
Click to collapse
What OTA do you currently try to flash? I currently try to give my luck to CAN-L11C432B320 even though I have a L01 device. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v71311/f1/full/update.zip
If needed, i updated the link for the cust img...
http://forum.xda-developers.com/showthread.php?p=70294269
Same isseu with other update files, i think i have to wait for the full EMUI 5 firmware..
Keezle said:
Same isseu with other update files, i think i have to wait for the full EMUI 5 firmware..
Click to expand...
Click to collapse
hello I have the problem Software install failed! can you help me thanks in advance
better work with ADB and flash 3 main imgs....recovery,boot,system images...then reboot...then do the 3 buttons update
need help
Hello dear friends
Do not be tired
I need a dump file Huawei Can l11
The ears are burned and their hard drive is changed
If there is someone else's phone root, please give me a dummy file
thanks to everyone
Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.
Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47
gm007 said:
Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47
Click to expand...
Click to collapse
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
You can use that HWOTA method to recovery FullOTA rom no need to use FunkyHuawei.
forati89 said:
Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.
Click to expand...
Click to collapse
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..
m_adnan said:
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..
Click to expand...
Click to collapse
To boot into bootloader mode you have to plug the usb and hold volume down while booting.
gm007 said:
To boot into bootloader mode you have to plug the usb and hold volume down while booting.
Click to expand...
Click to collapse
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
m_adnan said:
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Click to expand...
Click to collapse
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.
gm007 said:
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.
Click to expand...
Click to collapse
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..
m_adnan said:
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..
Click to expand...
Click to collapse
Maybe you still have twrp installed?
Volume up + power without connecting usb.
gm007 said:
Maybe you still have twrp installed?
Volume up + power without connecting usb.
Click to expand...
Click to collapse
already tried, but without success.. it always end in that error mode..
forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
how you managed to restore stock recovery? with frp only reading is allowed in fastboot i thought?
same probs here with my p10 vtr-l09 but cant get to one of the recoverys .. how can i tell the frp lock that everything is fine with my fastboot commands?
Sent from my HUAWEI HUAWEI GRA-L09 using XDA Labs
hi, did you manage to solve this problem?
my phone boot only in this screen mode http://imgur.com/a/rMcO7. this is not my pic but error is: error mode attention. please update system again. error. func no 14 (iom3 image) error no: 1 (security verify failed).
What can I do to revive my phone. not working fastboot, bootloader, dload method to force flash of rom ecc... THx
I've similar situation..i'm not able to flash any kind of image..
Wire1122 said:
my phone boot only in this screen mode http://imgur.com/a/rMcO7. this is not my pic but error is: error mode attention. please update system again. error. func no 14 (iom3 image) error no: 1 (security verify failed).
What can I do to revive my phone. not working fastboot, bootloader, dload method to force flash of rom ecc... THx
Click to expand...
Click to collapse
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
Now you search for mega Thread and there will be unbricking section! UW!
RootingPro-18 said:
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
Now you search for mega Thread and there will be unbricking section! UW!
Click to expand...
Click to collapse
Thancks, but my phone is already in huawei assistance.
Hi there, I'm coming up with the following problem,
I've wiped system in twrp by mistake and i can't boot my phone now. It stucks on the warning about unlocked bootloader. I can't get into fastboot mode and don't have custom recovery. I can boot into huawei erecovery but it doesn't find right package and into huawei recovery but i've tried few firmwares and every time it shows "software install failed incompatiblity with current version"? Do you have any suggestions? I have vns-l21c09b381 version.
Thanks in advance.
Sorry if my English is bad.
kubaj0000 said:
Hi there, I'm coming up with the following problem,
I've wiped system in twrp by mistake and i can't boot my phone now. It stucks on the warning about unlocked bootloader. I can't get into fastboot mode and don't have custom recovery. I can boot into huawei erecovery but it doesn't find right package and into huawei recovery but i've tried few firmwares and every time it shows "software install failed incompatiblity with current version"? Do you have any suggestions? I have vns-l21c09b381 version.
Thanks in advance.
Sorry if my English is bad.
Click to expand...
Click to collapse
In this thread go to post 5. Follow the instructions under EMUI 5 downgrading/unbricking.
I managed to boot into fastoboot so I think
that i will unbrick it now but thanks for reply
kubaj0000 said:
I managed to boot into fastoboot so I think
that i will unbrick it now but thanks for reply
Click to expand...
Click to collapse
Your decision.
kubaj0000 said:
I managed to boot into fastoboot so I think
that i will unbrick it now but thanks for reply
Click to expand...
Click to collapse
Hi there, may I know what happened after that?How did you unbrick via fastboot?
TNJR said:
Hi there, may I know what happened after that?How did you unbrick via fastboot?
Click to expand...
Click to collapse
I don't remember now.... I think that I extracted update.app and flashed boot and system, then system booted so I installed firmware finder and reflashed all rom via dns. I don't know if it it was as I write and if yes if it's good procedure but anyway it worked for me
Hi guys i have a big problem
I rebrand my phone from PRA-LA1 to PRA-LX1 to install oreo rom and when i install it i format every thing in the phone it was a mistake now I'm facing
Error
Attention
Update system again
Func no:11(recovery)
Func no:2 (load field)
Please any solution
Abdala2307 said:
Hi guys i have a big problem
I rebrand my phone from PRA-LA1 to PRA-LX1 to install oreo rom and when i install it i format every thing in the phone it was a mistake now I'm facing
Error
Attention
Update system again
Func no:11(recovery)
Func no:2 (load field)
Please any solution
Click to expand...
Click to collapse
Can you access fastboot? Hold Vol- and plug the USB cable.
Botar230 said:
Can you access fastboot? Hold Vol- and plug the USB cable.
Click to expand...
Click to collapse
Yes i can but when i flashing any recovery icant get into it
Abdala2307 said:
Yes i can but when i flashing any recovery icant get into it
Click to expand...
Click to collapse
Try to flash this recovery, and then hold Vol+ and power button to access it. You can also try to use fastboot boot <path>.img, but I didn't test it on p8 lite 2017, so it may not work.